1da73df27d
FF_LPC546XX: Remove LWIP feature
...
Signed-off-by: Mahadevan Mahesh <Mahesh.Mahadevan@nxp.com>
2017-11-28 16:18:44 +00:00
f2d2ed44cd
LPC546XX: Add ENET support
...
Signed-off-by: Mahadevan Mahesh <Mahesh.Mahadevan@nxp.com>
2017-11-28 16:18:36 +00:00
a4575a965f
rtl8195am - refactor bootloader and ota support
...
1. move ota region 1 from 0x00b000 to 0x040000
2. move ota region 2 from 0x0c0000 to 0x120000
3. refactor bootloader header as follows:
uint32_t tag;
uint32_t ver;
uint64_t timestamp;
uint32_t size;
uint8_t hash[32];
uint8_t campaign[16];
uint32_t crc32;
where,
a. hash is the sha256 checksum of the payload.
b. crc32 is the crc32 checksum of headers from tag to campaign.
4. Call NVIC_SystemReset for soft reset.
Signed-off-by: Tony Wu <tung7970@gmail.com>
2017-11-28 21:33:51 +08:00
ceef097f38
Enable tickless for nRF52840
2017-11-28 13:35:52 +01:00
f2de0956b4
Updated ODIN drivers to v2.3 RC1
2017-11-28 12:22:45 +01:00
b084812eff
current critical section implementation makes possible that interrupt
...
signals are lost. It was observed at last for tests-api-spi ci-test-shield's
test.
This patch introduce usage of sdk5 origin implementation in which
sd_nvic_critical_region_enter/exit is calling each time critical region
is enter/exit. This fixes the issue.
2017-11-28 09:44:28 +01:00
63ad3aeae3
Added the proper defines for the STM32L432 bootloader support
2017-11-27 15:41:30 +01:00
4778a40643
Changed NVIC Flash base address to support the bootloader
2017-11-27 15:32:53 +01:00
65866dd10a
Enbaled bootloader support for STM32L432KC
...
Added NUCLEO_L433RC_P target
2017-11-27 15:26:00 +01:00
632b2f1660
Updated wrongly defined UART3_BASE into USART3_BASE
2017-11-27 15:19:43 +01:00
66a1967fb4
Added TARGET_STM32L433RC stack size define into mbed_rtx.h
2017-11-27 15:15:17 +01:00
fb914149dd
Updated to toolchain startup/linker files to support the 433 devices
...
Also added the symbolic MBED_APP_START/MBED_APP_END defines
2017-11-27 15:03:43 +01:00
94c46b102b
defined STM32L433xx
2017-11-27 14:52:37 +01:00
e25dfc07f0
Added stm32l433xx.h defined STM32L433xx
2017-11-27 14:51:46 +01:00
6907b6d9e5
Updated PeripheralNames.h, PeripheralPins.c and PinNames.h for STM32L433 devices
2017-11-27 14:44:35 +01:00
90bb8fc368
Copied TARGET_STM32L432 to TARGET_STM32L433, renamed 432 files to 433
2017-11-27 14:36:47 +01:00
26f24ada10
DISCO_F746NG: typo in config name
2017-11-27 09:46:36 +01:00
c95728f6fc
Fix issue with timer timebase on EFR32
...
Timer code was written based on integer multiple HF clock frequencies. EFR32 doesn't conform to that (38.4), and so the timestamp ticks were off by 1%. Enough to trip up some CI tests on TB_SENSE_12 (#5496 )
2017-11-25 11:23:41 +01:00
b1073c165f
DISCO_F746NG: add usp_speed config
2017-11-24 16:52:59 +01:00
e900d5a04d
Squash warnings by defining 'NC' as unsigned type
2017-11-24 16:14:56 +01:00
73bd5ff5fb
Remove deprecated em_int
2017-11-24 16:01:00 +01:00
6c6e762c49
Support USARTs up to USART5 in SPI
2017-11-24 15:53:44 +01:00
53f88b5e26
Support USARTs up to USART5 in serial
2017-11-24 15:53:09 +01:00
3d4cae84d5
Upgrade to emlib 5.3.3
2017-11-24 15:52:20 +01:00
1cf47f6209
STM32 uart: update after code review
2017-11-24 13:39:33 +01:00
76fd28c825
Upgrade RAIL to v2.1.1
2017-11-24 12:57:43 +01:00
ee77079c47
REALTEK_RTL8195AM Wifi driver - adds check of credentials
...
Adds checks that SSID is non-empty and that password is 8-63 characters
long when security is enabled
2017-11-24 13:08:22 +02:00
07e71d6ec8
STM32 LPUART : update clock source depending on expected baudrate
2017-11-23 14:52:35 +01:00
6d64c2fbf4
STM32 UART init update
...
- serial_init, serial_free and serial_baud function moved from serial_device.c (specific to each STM32 family) to serial_api.c (common STM32 file)
- default baudrate value was hardcoded to 9600
- Value is set now to MBED_CONF_PLATFORM_STDIO_BAUD_RATE for STDIO
- Value is set now to MBED_CONF_PLATFORM_DEFAULT_SERIAL_BAUD_RATE for other use
- UART init will not be stopped before calling serial_baud function
2017-11-23 14:47:54 +01:00
839bd642d0
STM32: SPI 3 wires mode not supported in SPI slave
...
This patch handles the case of SPI slave mode without MISO (NC).
In case MISO is not connected, we consider that SPI will be configured in
3 wires mode (CLK / MOSI / CS, but no MISO). In this case, the MOSI line
is bi-directional : SPI_DIRECTION_1LINE.
But as this is not supported yet in slave mode, we force it to
SPI_DIRECTION_2LINES. In this case slave SPI will receive data on MOSI
but nothing will be sent back to master as MISO is not connected.
2017-11-23 10:10:05 +01:00
ab1b3ae8d3
Merge pull request #5454 from OpenNuvoton/trng_get_unalignment
...
Nuvoton: TRNG_Get support 32 bytes unalignment
2017-11-22 10:21:39 -06:00
b7a7d4ed1a
Merge pull request #5553 from 0xc0170/OpenNuvoton-nuvoton_fix_lpticker
...
Nuvoton: fix lpticker interrupt
2017-11-22 10:20:31 -06:00
369187cadf
Merge pull request #5535 from MikeDK/nucleo_l432kc_async_serial_fix
...
NUCLEO_L432KC: Fixed async serial
2017-11-22 10:19:53 -06:00
5e7851c9c5
Merge pull request #5521 from bcostm/dev_usbdevice_disco-f429zi
...
STM32: Add USB Device on DISCO_F429ZI
2017-11-22 10:17:15 -06:00
a834425d97
Merge pull request #5516 from gorazdko/lpc546xx-fix-adc
...
lpc546xx: fix adc
2017-11-22 10:16:53 -06:00
ced2f74f16
Merge pull request #5513 from bcostm/fix_adc_inited
...
STM32: Initialize ADC peripheral for each AnalogIn object creation
2017-11-22 10:16:14 -06:00
bc9c9ca1e2
[M487] Remove trailing space in lp_ticker/us_ticker
2017-11-22 08:55:58 +00:00
8b86d44867
[M487] Fix premature lp_ticker interrupt
...
Old lp_ticker handles past event, but it has a bug with premature go-off.
The bug can re-produce on mbed-os-tests-mbed_drivers-lp_timeout/mbed-os-tests-mbed_hal-lp_us_tickers (mbed-os commit: 9c1fd48529
2017-11-22 08:55:58 +00:00
cefcb8cff3
Update K64F trng_api.c
2017-11-21 16:50:43 -06:00
a519b8449b
Merge pull request #5518 from fbmrk/issue_5514
...
STM32F407VG: Fix RTC
2017-11-20 10:53:46 -06:00
800be4e90d
Merge pull request #5512 from jeromecoutant/PR_L072
...
DISCO_L072CZ_LRWAN1 can use LSE from LORA module
2017-11-20 10:53:20 -06:00
29ae97cd8b
NUCLEO_L432KC: added SERIAL_ASYNC to targets.json
2017-11-20 15:49:35 +01:00
8a1c29c2e5
TARGET_STM32L4: added missing #ifdef in serial_device.c
2017-11-20 15:49:18 +01:00
5c2f2c3cff
lpc546xx: remove obsolete line
2017-11-18 10:44:33 +01:00
8411134184
lpc546xx: correct register name (DIGIMODE)
2017-11-17 19:16:42 +01:00
d62b47393e
lpc546xx: fix adc
...
Resolve #5304
2017-11-17 13:54:25 +01:00
c54e9079b8
STM32 ADC: replace flags type from int to bool
2017-11-17 13:50:59 +01:00
1d3eb508bf
STM32: fix linker error with adc_read()
2017-11-17 13:50:59 +01:00
2bbedabf7d
STM32: add analogin_api.c file in STM folder
2017-11-17 13:50:59 +01:00
34fdcc926b
STM32: move analogin_read functions in a common file
2017-11-17 13:50:59 +01:00
4dbe95dded
STM32: rename analogin_api.c in analogin_device.c
2017-11-17 13:50:59 +01:00
072ec2e765
STM32L4 ADC: remove adc_inited flag
2017-11-17 13:50:59 +01:00
52d942e2d2
STM32L1 ADC: remove adc_inited flag
2017-11-17 13:50:59 +01:00
4b82479175
STM32L0 ADC: remove adc_inited flag
2017-11-17 13:50:59 +01:00
75f80abddc
STM32F7 ADC: remove adc_inited flag
2017-11-17 13:50:59 +01:00
d5ff05a03b
STM32F4 ADC: remove adc_inited flag
2017-11-17 13:50:59 +01:00
7005bc21d7
STM32F3 ADC: remove adc_inited flag
2017-11-17 13:50:59 +01:00
f12391ad25
STM32F2 ADC: remove adc_inited flag
2017-11-17 13:50:59 +01:00
36110e10cf
STM32F1 ADC: remove adc_inited flag
2017-11-17 13:50:58 +01:00
2e2744ccbe
STM32F0 ADC: remove adc_inited flag
2017-11-17 13:50:58 +01:00
57722eb2b5
STM32 USBDevice: Update targets.json for DISCO_F429ZI
2017-11-17 13:11:57 +01:00
b025ea16d6
Merge pull request #5137 from dave-wu/master
...
Add support for ADI EV-COG-AD3029LZ platform.
2017-11-17 10:21:56 +00:00
313458b120
STM32F407VG: Fix RTC
2017-11-17 08:52:00 +01:00
3bedff36e3
Merge pull request #4825 from SiliconLabs/feature/mbedtls-hw-accel
...
Silicon Labs: Add cryptographic acceleration support
2017-11-16 16:24:52 +00:00
d8d8c28e11
Merge pull request #5452 from 0xc0170/fix_i2c_onsemi
...
ONSEMI: Fix I2C issues
2017-11-16 16:18:28 +00:00
01bc4340e8
Merge pull request #5482 from bcostm/fix_disco_l072cz_extclock
...
DISCO_L072CZ_LRWAN1: HSE clock configuration improvement
2017-11-16 16:15:12 +00:00
1fa09fa43d
Merge pull request #5487 from nvlsianpu/bugfix_5462_initial_pin_value
...
Fix bug for issue: initial pin value not retained
2017-11-16 16:13:13 +00:00
114e019675
Merge pull request #5486 from bcostm/fix_CAN3
...
STM32: Add support of CAN3
2017-11-16 16:12:27 +00:00
dc6dd5961e
Merge pull request #5505 from LMESTM/fix_smartcard_HAL
...
STM32: HAL smartcard, fix memory corruption in Receive
2017-11-16 16:11:04 +00:00
763531921f
DISCO_L072CZ_LRWAN1 can use LSE from LORA module (more precise than LSI)
2017-11-16 15:27:04 +01:00
5f86ae5757
STM32L072CZ error in ARM sct file name
2017-11-16 15:12:51 +01:00
45aa2130bc
Added SystemCoreClock as an extern.
2017-11-16 13:29:43 +00:00
288094568c
[M487/NUC472/NANO130] fix TRUE/FALSE redefinition
2017-11-16 11:21:20 +00:00
401674284a
Cleaned up some formatting issues.
2017-11-15 22:59:26 +11:00
41eb565d9c
Merge pull request #5342 from ARMmbed/feature_cortex_a
...
Update CMSIS/RTX with Cortex-A support
2017-11-15 11:24:36 +00:00
be42c6de55
STM32: HAL smartcard, fix memory corruption in Receive
...
Re-casting with tmp the uint8_t* pData pointer to uint16_t* brings a
memory corruption and typically can corrupt the size parameter. This
is fixed with this commit.
STM32 Internal ticket reference : 39116
2017-11-15 10:50:21 +01:00
2d8d8ae9e1
STM32: fix error with CAN_3 not defined
2017-11-15 10:36:03 +01:00
2e2b408580
STM32: fix compilation error with STM32F1
2017-11-15 09:07:52 +01:00
f0aed41991
DISCO_L072CZ: remove dead code
2017-11-15 08:59:50 +01:00
82a58ac94d
Added support for ADI EV-COG-AD3029LZ platform.
...
Fixed issues raised from ARM PR review and removed the unsupported platform.
- Fixed an issue where the TRNG is read even though it may not be ready;
- Added configuration to ensure the buffering mode is disabled so only 8-bit bytes are generated;
- Moved the TRNG device handle into the trng_t structure.
Removed undefined spi slave related functions.
- Added error checking for trng_get_bytes function;
- Added curly brackets to single line conditions for some files;
- Changed rx and tx buffers in serial module as local variables;
- Removed some unused code and some minor formatting corrections;
- Minor i2c & spi updates for github pull request;
- Added function definition for spi_master_block_write.
Added default delay and sample times for the ADC during initialization.
- Added code to clear stack variable in trng_get_bytes upon exiting the
function;
- Remove lp ticker functionality as the timer hardware does not satisfy
lp timer requirements.
Added a check for the STUCK bit before reading the RNG data register to ensure there are no hardware faults.
- Removed .mbedignore to work around some exporter issues;
- Added #includes to some of the driver data C files for them to build on their own.
2017-11-15 16:35:31 +11:00
be2a6ae273
STM32: Use CAN3_BASE + typos
2017-11-14 09:48:02 +01:00
0ef4e2881c
STM32: Add support of CAN3 on STM32F413/F767
2017-11-14 09:48:02 +01:00
f0912554d5
Merge pull request #5473 from marcuschangarm/rtl8195am_ota
...
Reorganize defines for firmware updates on Realtek RTL8195AM
2017-11-13 10:59:28 -06:00
4185c1a6cf
Merge pull request #5471 from marcuschangarm/rtl8195_flash_page
...
Increase flash program granularity on Realtek RTL8195AM
2017-11-13 10:58:50 -06:00
757a4e3b75
Merge pull request #5464 from Archcady/Fix_lockup
...
Fix lockup issue for REALTEK_RTL8195AM
2017-11-13 10:54:37 -06:00
ee76bd8ae3
Merge pull request #5231 from jrobeson/add-rblab-blenano2
...
Add support for RedBear's BLE Nano 2
2017-11-13 10:53:04 -06:00
13d43d75ef
Merge pull request #5144 from dave-wu/ev-cog-ad4050lz
...
Add support for ADI EV-COG-AD4050LZ platform.
2017-11-13 10:50:51 -06:00
edb86500b5
Fix bug for issue 5462, initial pin value not retained
...
For api usage like DigitalOut led(LED1, 1) the hal function gpio_write()
sets the output before f. gpio_mode() is called. gpio_mode() clears the
output as it take never writen parameters (gpio_cfg_t.init_hight).
This patch use internal hardware register of GPIO output instedad of above paramiter latch
for retaining proper writen state.
2017-11-13 16:44:56 +01:00
104295b64e
DISCO_L072CZ: add comment in clock_source config
2017-11-13 11:36:22 +01:00
c0f6b25eba
DISCO_L072CZ: align SetSysClock_PLL_HSE() with SetSysClock_PLL_HSI()
2017-11-13 11:34:56 +01:00
d8a9e35a0c
[M487/NUC472] Refine trng_get_bytes for consistency and readability
2017-11-13 12:11:08 +08:00
1dc3941a5f
Apply feedback by @Patater
2017-11-11 19:38:54 +01:00
a451498141
rtl8195am - remove redundant header file inclusion
...
Signed-off-by: Tony Wu <tung7970@gmail.com>
2017-11-10 09:53:42 +00:00
c5a5438256
Update params in calls to LD/STREXW to be uint32_t
2017-11-10 09:53:42 +00:00
717087c772
Renesas: Add empty mbed_rtx.h
2017-11-10 09:53:41 +00:00
c10dd0a725
RZ_A1H: Fix cmsis header name
2017-11-10 09:53:41 +00:00
47bae16a5c
Merge pull request #5305 from andcor02/master
...
New Target: Mbed Connect Cloud board
2017-11-10 08:43:29 +00:00
2ee058be53
[M487/NUC472] Refine for correctness control
2017-11-10 16:22:35 +08:00
a0729952a3
Reorganize defines for firmware updates on Realtek RTL8195AM
...
Moved defines, typedefs and function prototypes from ota_api.c to
ota_api.h so that these can be included in applications.
2017-11-09 10:27:59 -08:00
5fe03afea6
Increase flash program granularity on Realtek RTL8195AM
...
The Page size has been set to 1 byte instead of the previous 256.
Although 256 is the physical page size, the driver supports
writing 1 byte at a time.
2017-11-09 09:51:06 -08:00
761254c1a0
Adding device_name for TB_SENSE_12.
...
device_name key is required to add Cloud Client support / enable bootloader support for this target.
2017-11-09 17:33:12 +00:00
0d1dc83eb1
Merge pull request #5432 from JammuKekkonen/master
...
HEXIWEAR: define HEXIWEAR target to support bootloader.
2017-11-09 16:56:29 +00:00
494c25d71c
Merge pull request #5344 from gorazdko/add-new-target-L-TEK-FF-LPC546XX
...
add new target L-Tek FF-LPC546XX
2017-11-09 16:42:24 +00:00
2b391447c6
Merge pull request #5390 from 0xc0170/fix_fire_int_ncs
...
ncs36510: fire interrupt correct timer fix
2017-11-09 16:36:57 +00:00
f17355fc71
Merge pull request #5422 from soramame21/master
...
Add bootloader support for DISCO_L475VG_IOT01A
2017-11-09 16:35:31 +00:00
18393f3faf
Merge pull request #5424 from jeromecoutant/PR_L496
...
NUCLEO_L496ZG_P support
2017-11-09 16:32:56 +00:00
a65d37e485
Merge pull request #5453 from marcuschangarm/rtl8195am_flash
...
Increase flash size on Realtek RTL8195AM
2017-11-09 16:23:46 +00:00
66054f4b62
Merge pull request #5455 from LMESTM/flash_2MB_GetSector_fix
...
STM32 Flash 2MB GetSector fix
2017-11-09 16:23:02 +00:00
6af9a5a002
Remove lines to improve readability
2017-11-09 18:23:17 +08:00
05cf4680bd
Update HAL library to fix lockup issue
2017-11-09 17:59:14 +08:00
17c86d1cd6
STM32F412 IAR linker file issue
2017-11-09 09:45:07 +01:00
e252b10148
[M487/NUC472] zeroize random data on the stack memory
2017-11-09 16:01:14 +08:00
d5122c5ea5
- Removed .mbedignore due to an issue with the eclipse exporter not picking up the ignored files;
...
- Added #includes in BSP data C files so they can be built on their own without mbedignore;
2017-11-09 14:17:15 +11:00
76c2c19853
[M487/NUC472] Unified code-path for remaining bytes of TRNG_Get
2017-11-08 19:56:12 +08:00
48a49b4a00
STM32: remove trailing white spaces
2017-11-08 10:28:46 +01:00
d9bda2800d
STM32F4: Flash: fix 2MB GetSector computation
...
The computation of the sector number in GetSector for 2MB flash sizes
consists in adding an extra constant for 2MB dual bank (12 as in
ADDR_FLASH_SECTOR_12), then going through the same address check as if it
was an address of the first sector.
That means that we need to modify tmp and address as if it was a first bank
address, which we're doing here by sub_stracting 0x100000 delta.
2017-11-08 10:24:36 +01:00
4118afa259
[M487/NUC472] TRN_Get support 32 bytes unalignment
2017-11-08 14:23:05 +08:00
f44a15454b
Increase flash size on Realtek RTL8195AM
...
The Realtek RTL8195AM has 2 MiB of external flash. This change
enables the FlashIAP driver to gain access to the full flash.
2017-11-07 09:25:24 -08:00
36d335baf4
Checking in the fixes related to I2C issues.
...
Three main issues:
1) The 0x13 special case section in write data in ncs36510_i2c.c didn't have a write++ command.
2) In the same write function, the WDAT8 command was put before the 0x13 section and this is not correct
3) Needed to add wait_us(0) before and after the register writes for apparent clock domain crossing delay times until registers are stable in HW
There were also a handful of other tweaks related to general code maintenance and moving some status register checks to the proper locations.
2017-11-07 16:00:05 +00:00
bf3d68ee88
Update HAL code to resolve ticker lockup issue
2017-11-07 17:02:42 +08:00
07646db24c
rtl8195am - fix us_ticker interrupt handling
...
TIMER2_7_IRQ is shared among several timer sources, including
us_ticker. Raising TIMER2_7_IRQ pending bit will trigger the timer
interrupt, but the timer interrupt handler will not know which timer
source this interrupt is for. This patch sets timer load value to one
tick and force us_ticker to fire almost "immediately".
TIMER2_7_IRQ is handled through a common interrupt handler, and
is automatically cleared. Therefore, there is no need to clear IRQ.
The underlying timer HAL treats load value as micro-seconds and does
conversion internally. Therefore, simply pass micro-seconds to timer
HAL without converting to tick first.
Signed-off-by: Tony Wu <tung7970@gmail.com>
2017-11-07 11:44:43 +08:00
46b6490d87
HEXIWEAR: define HEXIWEAR target to support bootloader.
2017-11-03 18:25:02 +02:00
88c3bcfd1c
NUCLEO_L496ZG_P support
2017-11-03 11:06:45 +01:00
dde615b8a8
NUCLEO_L496ZG minor update
2017-11-03 10:54:49 +01:00
a2c78e104a
Add support for RedBear's BLE Nano 2
...
Cribbed from 4bf42f2e20
2017-11-02 17:43:12 -04:00
e5fd7f2100
Add mbed-cloud-client support on DISCO_L475VG_IOT01A with
...
wifi_esp8266_v4.json.
2017-11-03 05:15:38 +09:00
9163ddfe61
Merge pull request #5399 from jeromecoutant/PR_MSP
...
STM32F4/STM32L4: remove MSP template file
2017-11-02 10:42:04 -05:00
c40b642455
Merge pull request #4650 from catiedev/master
...
NUCLEO_L496ZG: Add new Platform
2017-11-02 10:36:23 -05:00
9e0e9c8bee
Added a check for the STUCK bit before reading the RNG data register to ensure there are no hardware faults.
2017-11-02 15:50:55 +11:00
53c476acf2
introduced mbed Connect Cloud board based on ODIN-W2 Module rety commit, added ublox changes
...
Corrected error
Corrected error in targets json
Reworked JSON
Added lwip-eth to Connect ODIN removes ARM CC error
Fixed formating issues
Correct formating error in .json
Indentation errors
2017-10-31 11:24:28 +00:00
02f1d0185a
Merge pull request #5320 from kegilbert/fix-build-warnings-lpc4088
...
Fix ethernet API build warnings for LPC4088
2017-10-30 10:08:15 -05:00
c51f0f3d5f
STM32F4/STM32L4: remove MSP template file
...
HAL_MspInit/HAL_MspDeInit/HAL_PPP_MspInit/HAL_PPP_MspDeInit weak functions can now be overwritten as it is expected
2017-10-30 10:38:43 +01:00
2eff4c7569
- Added code to clear temporary variable on the stack before exiting the
...
trng_get_bytes;
- Removed lp ticker as it does not satisfy the requirements of the lp
timer.
2017-10-30 02:16:55 +01:00
99f4961325
ncs36510: fire interrupt correct timer fix
...
Use Timer1, it is used for us ticker isr handling. Plus reset target counter,
that should be 0, go to upper ticker isr handler immediately.
2017-10-27 17:46:24 +01:00
901157b305
Replace PACKED attribute on lpc4088 ethernet structs with MBED_PACKED. Placement of packed attribute was causing warnings due to following typedef
2017-10-26 11:34:48 -05:00
97e2d4a8c5
Merge pull request #5025 from grygorek/master
...
LPC1769 port
2017-10-26 11:35:35 +01:00
38ba693c57
Merge pull request #5327 from bcostm/remove_warnings
...
STM32: Remove compilation warnings
2017-10-26 11:05:20 +01:00
ea43b437a6
Merge pull request #5352 from Archcady/fix-event-lockup
...
Fix us_ticker collision and race for RTL8195AM
2017-10-26 11:01:06 +01:00
0958a8dce1
Add missing device_name for targets with bootloader
2017-10-25 10:40:10 +02:00
1566395323
Merge pull request #5347 from 0xc0170/nxp_fix_lptimer
...
MCUXpresso: Fix LPTimer issue when using multiple timeout objects
2017-10-23 10:34:50 -05:00
2a8023180f
Merge pull request #5340 from 0xc0170/nxp_fix_us_timer_replacement
...
MCUXpresso: Fix issue of ticker interrupt incorrectly firing
2017-10-23 10:34:07 -05:00
d2b762092c
Merge pull request #5260 from tung7970/fix-iar
...
RTL8195AM - Fix IAR ielftool zero-padding issue
2017-10-23 10:32:29 -05:00
3354327a9f
Merge pull request #5188 from bcostm/fix_dac_f207zg
...
NUCLEO_F207ZG: Analogout improvement
2017-10-23 10:31:17 -05:00
656aa8279b
Merge pull request #5179 from LMESTM/trng_deprecated_call
...
STM32: TRNG: remove call to deprecated HAL_RNG_GetRandomNumber
2017-10-23 10:29:04 -05:00
1c28898ed1
add target TARGET_SAKURAIO_EVB_01.
2017-10-23 12:55:58 +09:00
38488623c8
Activate FLASH hal support on 2 STM32 boards
...
The generic Flash support for L4 and L0 families is already there,
but was not activated by default on 2 recentely added boards:
DISCO_L475VG_IOT01A and DISCO_L072CZ_LRWAN1
This is done now.
2017-10-20 15:11:01 +02:00
1ee88fb0f6
rtl8195am - fix us_ticker collision and race
...
Switch to timer 2 for us_ticker for timer 6 might be used
for power saving.
Signed-off-by: Tony Wu <tonywu@realtek.com>
2017-10-20 17:10:02 +08:00
0c679a8f7d
Merge pull request #4989 from maclobdell/k66f_flash_iap_bootloader_noflashdrvr
...
add flash iap and bootloader support to K66F
2017-10-19 16:45:52 +01:00
2af7213c51
Merge pull request #5104 from architech-boards/master
...
add support for SILICA_SENSOR_NODE platform
2017-10-19 16:44:17 +01:00
bc5c94517c
MCUXpresso: Fix LPTimer issue when using multiple timeout objects
...
Fix for Issue #5150
Signed-off-by: Mahadevan Mahesh <Mahesh.Mahadevan@nxp.com>
2017-10-19 11:38:22 +01:00
b010223145
add new target L-Tek FF-LPC546XX
2017-10-18 23:56:12 +02:00
168bdc8803
MCUXpresso: Fix issue of ticker interrupt incorrectly firing
...
Fix for Issue #5279
Signed-off-by: Mahadevan Mahesh <Mahesh.Mahadevan@nxp.com>
2017-10-18 15:29:57 +01:00
35bf526ca4
STM32: Remove IAR compilation warning
2017-10-18 10:07:06 +02:00
ad55bc26dc
STM32: Remove GCC_ARM compilation warnings
2017-10-17 14:04:59 +02:00
be5a8a98ee
lpc1769 inherits from lpc1768; reuse lpc1768.ld for LPC1769 target
2017-10-17 11:12:59 +01:00
dba38b6250
Add detect_code=0xC006 to the VBLUNO51 boards configuration.
...
Add detect_code=0xC006 to the VBLUNO51 boards configuration.
Disbale UART Hard flow control feature.
Signed-off-by: iotvietmember <robotden@gmail.com>
2017-10-17 12:07:18 +07:00
e6b0a2bec4
fix app start size in IAR linker for K66F
2017-10-13 10:41:08 -05:00
5ec0616602
add updates for bootloader support to K66F
2017-10-13 10:41:08 -05:00
845f24507e
enabled flash in-application-programming driver for k66f
2017-10-13 10:41:07 -05:00
849749f86f
STM32: RNG: Ensure that no more than 1 instance is used
...
There is only 1 RNG HW IP and we do not support more than one driver
user at a time, so let's ensure this is the case and raise an error if
needed.
2017-10-13 16:59:33 +02:00
14343c49c4
STM32: TRNG: remove call to deprecated HAL_RNG_GetRandomNumber
...
HAL_RNG_GetRandomNumber is a deprecated API and replaced here with
a call to HAL_RNG_GenerateRandomNumber.
Doing so, we also rework the driver to use the 4 bytes returned by a call
to HAL_RNG_GenerateRandomNumber instead of 1 byte out of 4.
HAL_RNG_GenerateRandomNumber was not returning any error code, so now
we can also check the return code.
2017-10-13 16:59:29 +02:00
410ef0cc6c
Merge pull request #5289 from LMESTM/test_api_ticker
...
STM32: RTC: Call irq_handler whenever interrupt fires
2017-10-13 09:28:18 -05:00
de3784f6da
Merge pull request #5288 from bcostm/NUCLEO32_add_ALT_pins
...
STM32: Add alternate pins on NUCLEO 32pins boards
2017-10-13 09:27:53 -05:00
f596c714bd
Merge pull request #5287 from andreaslarssonublox/ublox_odin_driver_os_5_v2.2_rc1
...
Updated u-blox ODIN-W2 binaries to 2.2 rc1
2017-10-13 09:27:29 -05:00
8bf2775e00
Merge pull request #5269 from bcostm/fix_rtc_struct_init
...
STM32: Initialize RTC structures at init phase.
2017-10-13 09:27:06 -05:00
6a74cdb39c
Merge pull request #5263 from bcostm/fix_init_struct
...
STM32: Fix analogout structure/variable wrong initialization
2017-10-13 09:25:59 -05:00
d3d7e0ccbf
Merge pull request #5228 from pavels/master
...
Add bootloaderd support to NUCLEO_F446RE target
2017-10-13 09:23:33 -05:00
2f25744b07
Merge pull request #5223 from seppestas/master
...
Fix analogin scaling for EFM32 target
2017-10-13 09:22:22 -05:00
0b796cdbb9
Merge pull request #5187 from nvlsianpu/fix_i2c_timeout
...
nRFx: Use us ticker for I2C timeout
2017-10-13 09:20:14 -05:00
a67737f993
Merge pull request #5086 from pan-/systick_sleep_fix
...
Sleep: Disallow sleep for targets turning off the systick clock at sleep entry
2017-10-13 09:19:10 -05:00
2f652be4c0
Merge pull request #4898 from u-blox/stm32f437xg_hw_security
...
Enable crypto HW acceleration for STM32F437xG platforms
2017-10-13 09:16:19 -05:00
97cb8519c8
Add bootloaderd support to NUCLEO_F446RE target
2017-10-12 19:44:02 +02:00
de2b5264e2
Added default delay and sample times for the ADC during initialization.
2017-10-12 12:46:54 +11:00
a35c76d805
rtl8195am - remove redundant file
...
This file is unused and redundant.
Signed-off-by: Tony Wu <tonywu@realtek.com>
2017-10-11 21:54:23 +08:00
f5b668a9fc
rtl8195am - fix IAR zero padding issue
...
Remove redundant memory regions, and merge multiple RAM regions into one
to solve ielftool zero padding issue.
The side effect is less control over object files placement. It's all up
to linker's best effort.
Signed-off-by: Tony Wu <tonywu@realtek.com>
2017-10-11 21:54:23 +08:00
e57d184fb0
rtl8195am - cleanup IAR icf file
...
Cleanup ICF file. No logic change.
Signed-off-by: Tony Wu <tonywu@realtek.com>
2017-10-11 21:54:23 +08:00
6d116273c7
- Cleaned up some formatting issues; - Fixed a build error in spi_master_block_write; - Some clean up in serai_api.
2017-10-11 15:06:49 +11:00
e15ebd3c53
STM32: RTC: Call irq_handler whenever interrupt fires
...
lp_ticker driver is the known registered user of RTC handler API.
In case, a lp_ticker is set in the past, the lp_ticker_fire_interrupt
will be called which itself sets the RTC interrupt as pending by calling
NVIC_SetPendingIRQ(RTC_WKUP_IRQn). This all happens without actual
programing of the RTC wake-up.
As a result the RTC HW and corresponding HAL layer doesn't expect an
interrupt to happen and will not call HAL_RTCEx_WakeUpTimerEventCallback.
To sove this situation, we will not use HAL_RTCEx_WakeUpTimerEventCallback
weak definition but rather call handler whenever an RTC interrupt fires.
2017-10-10 17:05:45 +02:00
992722df2a
Initialize State variable
2017-10-10 16:47:05 +02:00
35736f57a3
removed memory allocation
2017-10-10 16:46:12 +02:00
c571d8d6f8
STM32 RTC: initializes structures
2017-10-10 16:23:35 +02:00
7af6e88999
fixed pin LEDs
2017-10-10 16:04:52 +02:00
02598d57fa
Typo correction
2017-10-10 15:04:56 +02:00
868143e3dd
Coding style and add State field init
2017-10-10 15:02:11 +02:00
c5cc9ec8cf
NUCLEO_F207ZG: Fix issue with tests-api-analogout and GCC_ARM
...
Without this fix the tests-api-analogout test is fail with GCC_ARM.
2017-10-10 15:02:11 +02:00
e46beb659f
NUCLEO_L011K4: add ALT pins + cleanup
2017-10-10 14:44:01 +02:00
0155a416e6
NUCLEO_F042K6: add ALT pins + cleanup
2017-10-10 14:13:10 +02:00
182d689b8c
setted pin USBTX and USBRX
2017-10-10 13:58:41 +02:00
3fd009ed05
added clock_source for tests
2017-10-10 13:58:41 +02:00
c5e6689e82
added TARGET_STM32L476JG define in mbed_rtx.h
2017-10-10 13:58:41 +02:00
f63dfce4bb
modification to .ld to improve memory
2017-10-10 13:58:41 +02:00
e466685666
copy of L476RG ld file
2017-10-10 13:58:41 +02:00
4d75cbec01
peripherals pins adaptation
2017-10-10 13:58:41 +02:00
a95acdabb3
copy of L476RG target
2017-10-10 13:58:41 +02:00
b328654085
added SILICA_SENSOR_NODE in target.json
2017-10-10 13:58:41 +02:00
6ac1b0e046
NUCLEO_L432KC: add ALT pins + cleanup
2017-10-10 10:51:04 +02:00
34760c5567
NUCLEO_L031K6: add ALT pins + cleanup
2017-10-10 10:51:03 +02:00
f6e30e7422
NUCLEO_F303K8: add ALT pins + cleanup
2017-10-10 10:50:48 +02:00
ad1345771f
Merge pull request #5232 from tung7970/fix-target
...
RTL8195AM - Fix and cleanup mbed_rtx.h
2017-10-09 11:16:08 -05:00
80ff7071b4
Merge pull request #5210 from bcostm/L4_add_adc_calib
...
STM32: add ADC calibration for L4, F1, F3 devices
2017-10-09 11:15:31 -05:00
5c3ce0a84c
Merge pull request #5200 from nvlsianpu/nrf51_adcIn_range_extend
...
Extend nRF51 AnalogIn voltage range to 3.6 V
2017-10-09 11:14:41 -05:00
df484e7885
Merge pull request #5192 from andreaslarssonublox/ublox_move_stdio_uart_defines
...
Moved STDIO_UART defines for UBLOX_EVK_ODIN_W2
2017-10-09 11:14:06 -05:00
d6136b9790
Merge pull request #5157 from OpenNuvoton/nuvoton
...
NUC472/M453/M487/NANO130: Add updates for Nuvoton targets
2017-10-09 11:12:43 -05:00
d60f1452d5
Merge pull request #5113 from LMESTM/i2c_OpenDrainNoPull
...
STM: I2C: Configure pins in OpenDrainNoPull by default (no pullup)
2017-10-09 11:12:04 -05:00
2a0d38eaf6
fix bug: I2C timeout due the clos strething by slave on nRFx SoC
...
Change implementation of timeout to one that is using us_ticker hal.
Timeout is now configurable by I2C_TIMEOUT_VALUE_US macro and this
value will be imported if will be defined externaly.
2017-10-09 14:14:54 +02:00
6f9a54777d
Added curly brackets for the single line if else statement.
2017-10-09 17:28:46 +11:00
5ea792cc9a
- Added error checking for trng_get_bytes function;
...
- Added curly brackets to single line conditions in gpio_qpi.c and gpio_irq_api.c;
- Changed rx and tx buffers in serial module as local variables;
- Minor i2c & spi updates for github pull request;
- Added function definition for spi_master_block_write.
2017-10-09 17:13:58 +11:00
c476a600a2
remove sys.cpp file of the ARM_STD toolchain as done in the MR #4949
2017-10-06 11:37:03 +02:00
ed32f57070
fix can_s struct definition
2017-10-06 11:37:03 +02:00
4e83d7fb15
Fix for IAR tests
2017-10-06 11:35:16 +02:00
554125ef07
Align IAR files with mbed-os implementation (tests are still failing)
2017-10-06 11:35:16 +02:00
3ca0b64318
Replace tab by spaces
2017-10-06 11:35:16 +02:00
fa54e1ecba
Make ARM test pass on mbed-os5 tests
2017-10-06 11:35:16 +02:00
02df64b7d6
replace tab by spaces
2017-10-06 11:35:16 +02:00
507d05915d
Remove analogin_s definition from objects.h
...
The structure being already defined in
targets/TARGET_STM/TARGET_STM32L4/common_objects.h#L119, there is a
redefinition conflict.
2017-10-06 11:35:16 +02:00
fb27107416
NUCLEO_L496ZG change LPUART1 clock source to fix crash on serial init
2017-10-06 11:35:16 +02:00
abb5e2d0d3
NUCLEO_L496ZG JSON Clock Configuration
2017-10-06 11:35:16 +02:00
65fec215ab
NUCLEO_L496ZG Fix IAR startup script
2017-10-06 11:35:16 +02:00
4219ffc626
NUCLEO_L496ZG Fix ARM startup script
2017-10-06 11:35:16 +02:00
3b2bc2d10c
STM32L496xG fix objects.h to fit common_objects definition
2017-10-06 11:35:16 +02:00
313a933c09
NUCLEO_L496ZG Update comments
2017-10-06 11:35:16 +02:00
cca32d8196
NUCLEO_L496ZG Use new alternative pins definition
2017-10-06 11:35:16 +02:00
aebc227c15
NUCLEO_L496ZG update date in file copyrights headers
2017-10-06 11:35:16 +02:00
7c6c710ee1
NUCLEO_L496ZG Use correct linker script for IAR
2017-10-06 11:35:16 +02:00
9630a38fb8
NUCLEO_L496ZG target inherits from FAMILY_STM32
2017-10-06 11:35:16 +02:00
eea667567e
STM32L496ZG add IAR toolchain
2017-10-06 11:35:16 +02:00
dc2f29c86e
STM32L496ZG add ARM_STD toolchain
2017-10-06 11:35:16 +02:00
53d66bb013
STM32L496ZG add ARM_MICRO toolchain
2017-10-06 11:35:16 +02:00
0cedd1862e
NUCLEO_L496ZG add mbedOS 2 compatibility
2017-10-06 11:35:16 +02:00
fd7008c779
Add BSP files for NUCLEO_L496ZG
2017-10-06 11:35:16 +02:00
6d3e17cb3c
add compatibility with STM32L496xG MCUs
2017-10-06 11:35:16 +02:00
a0b624b62e
Merge pull request #5038 from chrissnow/LPC1768-Bootloader
...
Lpc1768 bootloader support
2017-10-05 11:11:08 -05:00
88b82e312d
fix init struct analogout
2017-10-05 16:35:05 +02:00
bc3fd12a0d
Updated u-blox ODIN-W2 binaries to 2.2 rc1
2017-10-04 16:41:59 +02:00
2291644a01
Merge pull request #5162 from NXPmicro/Support_LPC54618
...
Change LPC54608 to LPC546XX to include support for LPC54608/18/28
2017-10-03 13:23:07 -05:00
d1b81b2161
Removed the custom app thread stack size.
2017-10-03 17:32:10 +11:00
c196ad241d
Removed undefined spi slave related functions.
2017-10-03 15:00:42 +11:00
c942171a99
- Fixed an issue where the TRNG device is read even when it is not ready;
...
- Added a configuration call in trng_init to make sure the TRNG buffering mode is disabled, so only 8-bit bytes are returned;
- Moved the TRNG device handle into the trng_t structure;
- Fixed some formatting errors in the adc driver.
2017-10-03 14:21:37 +11:00
82ae53a282
Simplify CRP placement.
2017-10-02 19:23:35 +01:00
880f106740
Change LPC54608 to LPC546XX to include support for LPC54608/18/28
...
Signed-off-by: Mahadevan Mahesh <Mahesh.Mahadevan@nxp.com>
2017-10-02 11:20:27 -05:00
d0de5f792e
rtl8195am - fix ARMC6 guards
...
Fix ARMC6 guard typo introduced in commit 4f3f0cc9cc
2017-10-02 23:45:47 +08:00
120c9ad56c
Moved STDIO_UART defines to targets.json for UBLOX_EVK_ODIN_W2 instead of hardcoded.
2017-10-02 17:45:41 +02:00
c60194fdfd
Merge pull request #5208 from jeromecoutant/PR_F7_RTC
...
STM32F7 : RTC Wake Up Timer issue
2017-10-02 10:41:31 -05:00
8a3abbc857
Merge pull request #5207 from nvlsianpu/fix_DigitalIn_use_gpiote_nrf5x
...
Fix: DigitalIn of nRF5x was allocating GPIOTE channel
2017-10-02 10:39:46 -05:00
cc0b3d05aa
Merge pull request #5130 from bcostm/freeze_timer_in_debug
...
STM32: Freeze master timer on stop/breakpoint
2017-10-02 10:38:57 -05:00
42dc4cf612
Merge pull request #5089 from jeromecoutant/HSE_XTAL
...
STM32 : Disable HSE XTAL choice from the default clock source
2017-10-02 10:36:08 -05:00
728a3a4a76
mbed LPC1768 & Xpresso LPC1769 unified
...
Target of LPC1769 links to mbed LPC1768.
The PinNames.h has conditional compile for the pin names.
LWIP lpc17xx emac driver modified to allow LPC1769 target
2017-10-02 11:05:39 +01:00
5e36d32d86
rtl8195am - remove obsolete configs
...
The following configs were no longer necessary for RTX5.
OS_TASKCNT
OS_MAINSTKSIZE
OS_CLOCK
Signed-off-by: Tony Wu <tonywu@realtek.com>
2017-10-02 14:37:05 +08:00
7cf9bf5c3d
- Added definiton for i2c_reset;
...
- Removed unneeded code from i2c and serial modules.
2017-10-02 15:34:19 +11:00
86639587dd
Fixed a merge error for LPC11U34_421.
2017-10-02 14:36:03 +11:00
ce580dde74
Fixed issues raised in the feedback from ARM for the ADuCM4050 platform.
2017-10-02 14:28:25 +11:00
d6404726dd
Ensure CRP is set correctly for IAR, GCC and ARM
...
CRP value can be set through a macro in mbed_app such as
"macros": [
"CRP=CRP_NONE"
]
2017-09-30 19:26:05 +01:00
f8f54837cd
Linker update for bootloader support
2017-09-30 19:00:25 +01:00
a08fc2bb7a
Move CRP out of startup and into CRP.c so it can be conditionally compiled
2017-09-30 19:00:25 +01:00
fc503b8daf
Enable LPC1768 bootloader support
2017-09-30 19:00:25 +01:00
b6b9daa6f5
Merge pull request #5176 from 0xc0170/fix_fire_efm32
...
EFM32: fix fire interrupt (set flags)
2017-09-29 10:14:07 -05:00
f5bb15f773
Merge pull request #5152 from NXPmicro/Update_RTC_HAL_driver
...
Kinetis RTC HAL: Allow writing 0 to the seconds register
2017-09-29 10:12:22 -05:00
3b224252ef
Merge pull request #5141 from NXPmicro/Fix_LPC54608_LEDMap
...
LPC54608: Swap LED pin connections to match naming on the board
2017-09-29 10:12:04 -05:00
60ca4e9615
Merge pull request #5029 from kegilbert/odin-pinNames-whitespace-adjust
...
Adjust whitespace in Odin PinNames file to fit verbose LED pin mappings
2017-09-29 10:07:46 -05:00
81cc5a4960
Fix analogin scaling for EFM32 target
...
Fixes #5115 .
`analogin_read_u16` returns a value in the range `0x0000 - 0xFFF0`
since the resolution of the ADC is 12 bits. However, in
`analogin_read` this value gets divided by `0xFFFF` assuming the range
is `0x0000-0xFFFF`. This causes a small error in the value returned by
`AnalogIn::read` for the EFM32 target.
2017-09-29 16:07:33 +02:00
323dc93d89
Merge pull request #5050 from mbedNoobNinja/master
...
[RZ_A1H] Correct CAN Message ID and recetption rate in extended mode
2017-09-28 14:03:45 -05:00
fca97146cd
Add ADC calibration for STM32F1 and F3 devices
2017-09-28 12:49:11 +02:00
6cb1a23771
NRF52840: add the device configuration STCLK_OFF_DURING_SLEEP
2017-09-28 09:43:58 +01:00
c06368a21e
Merge pull request #5171 from jeromecoutant/PR_L432_RAM
...
STM32L432KC: increase RAM size from 48k to 64k
2017-09-27 15:35:44 -05:00
6cb0258344
Merge pull request #5026 from LMESTM/flash_init_issue_4967
...
STM32: Lock / Unlock flash for each operation
2017-09-27 15:17:26 -05:00
c24fed135b
Merge pull request #5032 from 0xc0170/fix_mts_debug
...
mts targets: fix debug() usage
2017-09-27 09:07:53 -05:00
760fc335c0
Merge pull request #4982 from NXPmicro/Update_K66_SDK22
...
Update K66F to SDK 2.2
2017-09-27 09:05:44 -05:00
b562e4e131
Merge pull request #4979 from bcostm/usbdevice_clean-up
...
STM32: USBDevice files clean-up
2017-09-27 09:04:37 -05:00
4f1cafd0b7
Merge pull request #5197 from c1728p9/fix_lpc54114
...
Fix LPC54114 vector table size
2017-09-27 09:01:44 -05:00
4824e18a95
STM32L4: add ADC calibration
2017-09-27 14:38:34 +02:00
93fb667b6d
Fix: DigitalIn of nRF5x was allocating GPIOTE channel
...
The allocation of GPIOTE channels for DigitalIn is unwanted behavior.
This caused early run-out of channels for InterruptPin.
This patch replacing input configuration that is using gpiote driver by configuration that is
using gpio hal.
2017-09-27 09:49:48 +02:00
1e36eb6fc9
STM32F7 : RTC Wake Up Timer issue
2017-09-26 17:04:29 +02:00
f861b37196
Extend nRF51 AnalogIn voltage range to 3.6 V
...
Previous the voltage range was set to 1.2 from SoC internal reference source.
This caused problem with testing. It is unexpected that range is much
shorter than vdd as well.
The voltage range was extended using SoC build in analog prescaler (set to 1/3).
2017-09-26 11:31:50 +02:00
c32890294e
Fix LPC54114 vector table size
...
Correct the vector table size on the LPC54114. This fixes crashes
seen on boot when building with GCC.
2017-09-25 18:49:38 -05:00
9a191de5f9
LPC1768: flash_hal removal duplication
...
IAP typedef duplication removal
2017-09-25 19:18:18 +02:00
6a6561028e
LPC1768: flash erase/write require a critical section
...
From RM:
32.3.2.6 Interrupts during IAP
The on-chip flash memory is not accessible during erase/write operations. When the user
application code starts executing the interrupt vectors from the user flash area are active.
The user should either disable interrupts, or ensure that user interrupt vectors are active in
RAM and that the interrupt handlers reside in RAM, before making a flash erase/write IAP
call. The IAP code does not use or disable interrupts.
2017-09-25 19:18:06 +02:00
d76a5a7eb9
Fix typo in DELTA_DFBM_NQ620 target
...
Replace `device_has_had` by `device_has_add`
2017-09-25 17:47:16 +01:00
c623e889c0
LPC1768: RAM end adjust fix
...
The topmost 32 bytes used by IAP functions, this was not included in the RAM
end previously.
2017-09-25 13:50:54 +01:00
d9a8c63b53
K66F: Use DSPI SDK driver API's in spi block read
...
Signed-off-by: Mahadevan Mahesh <Mahesh.Mahadevan@nxp.com>
2017-09-24 08:14:59 -05:00
593fb3a6fb
K66F: Update to SDK 2.2
...
Signed-off-by: Mahadevan Mahesh <Mahesh.Mahadevan@nxp.com>
2017-09-24 08:14:52 -05:00
29988933aa
EFM32: fix fire interrupt (set flags)
...
There's overflow counter that needs to be 0, and
CC0 flag set.
Fixes #5051
2017-09-22 14:45:30 +01:00
81fde11dae
Merge pull request #4968 from dlfryar/master
...
Add bootloader support for NXP FRDM-KW24D
2017-09-22 11:33:40 +01:00
a74e95fb26
Merge pull request #4973 from gorazdko/new-target-L-TEK-FF1705
...
Add new target: L-TEK FF1705
2017-09-22 11:32:50 +01:00
e2c42bb0a0
LPC1768 IAP Fix ( #4993 )
...
use IAP routines for the flash HAL implementation
2017-09-22 11:30:43 +01:00
bf426b0771
[NUC472/M453/M487/NANO130] Remove dead power-down code with mbed OS 3
...
These power-down code are stale and would be superseded by sleep manager.
2017-09-22 09:42:51 +08:00
4040211f9e
[NANO130] Refine sleep code
...
1. Remove stale code with mbed OS 3.
2. Remove check for busy peripherals unorganizedly. This would be supported by e.g. official sleep manager.
2017-09-22 09:33:53 +08:00
1dadb055f7
RTC HAL: Allow writing 0 to the seconds register
...
Signed-off-by: Mahadevan Mahesh <Mahesh.Mahadevan@nxp.com>
2017-09-21 13:33:07 -05:00
785413aa1e
[NANO130] Fix RTC hour error with AM/PM
2017-09-21 16:42:00 +08:00
a2cdb10bf7
Merge pull request #4932 from LMESTM/can_reset
...
Fix STM32 CAN reset to not lose context
2017-09-20 16:24:40 -05:00
33070988de
[NANO130] Fix lp_ticker wake-up is incorrectly disabled
2017-09-20 16:56:37 +08:00
f553277198
[NANO130] Fix lp_ticker typo
2017-09-20 16:56:36 +08:00
c4c902289f
[NANO130] Change SW2/SW3 to SW1/SW2 to match target board
2017-09-20 16:56:35 +08:00
443d18a18c
[NANO130] Move target configuration from mbed_lib.json to targets.json
2017-09-20 16:56:34 +08:00
d4af4ba3a7
[NUC472/M453/M487] Fix RTC hour error with AM/PM
2017-09-20 16:56:34 +08:00
83fc132b97
[NUC472] Fix RTC macro function with no arguments in BSP
2017-09-20 16:56:33 +08:00
6eb4e11b37
[NUC472/M453/M487] Refine sleep code
...
1. Remove stale code with mbed OS 3.
2. Remove check for busy peripherals unorganizedly. This would be supported by e.g. official sleep manager.
2017-09-20 16:56:32 +08:00
52733fe7f6
[M487] Replace mktime/localtime with interrupt-safe version in rtc
...
The use of mktime was causing a fault when called in interrupt handler because on GCC it lock the mutex protecting the environment, To overcome this issue, this patch add dedicated routine to convert a time_t into a tm and vice versa.
In the process mktime has been optimized and is now an order of magnitude faster than the routines present in the C library.
2017-09-20 16:56:31 +08:00
00b1e72e49
Added support for ADI EV-COG-AD4050LZ platform.
2017-09-20 14:37:22 +10:00
6c1167844a
rtl8195am - fix us_ticker porting
...
commit f7bc126
2017-09-20 11:03:22 +08:00
82a37b0eb1
LPC54608: Swap LED pin connections to match naming on the board
...
Signed-off-by: Mahadevan Mahesh <Mahesh.Mahadevan@nxp.com>
2017-09-19 15:37:22 -05:00
8b0ee27819
STM32L432KC: increase RAM size from 48k to 64k
...
WARNING: you have to update ST-Link FW to V2J29M18
http://www.st.com/en/development-tools/stsw-link007.html
2017-09-19 15:11:23 +02:00
610c8c85fc
CAN Extended mode fix
2017-09-19 15:26:10 +03:00
003dd7c47f
Merge pull request #5044 from Archcady/Profile_debug
...
Realtek_RTL8195AM fix for debug profile
2017-09-19 10:43:25 +01:00
f18d2d862a
Merge pull request #5091 from theotherjimmy/fix-nordic-concat
...
Correct booting on Nordic devices with ARMC6
2017-09-19 10:24:54 +01:00
5bf18682e2
Add FREEZE_TIMER_ON_DEBUG condition
...
In order to give the choice to enable or not the timer freeze on stop/breakpoint.
This has to be defined in the mbed_app.json file for example.
2017-09-18 13:39:05 +02:00
9f86a32baf
Add freeze timer on debug for all STM32 devices
...
This is a continuation of the work done on the STM32F401xE devices only.
2017-09-18 13:31:46 +02:00
aeda7f7d28
Merge pull request #5069 from deepikabhavnani/assert_added
...
Changed error print to assert
2017-09-15 17:50:49 -05:00
f7bc12626d
Re-work Rtl8195AM ticker
...
Remove intermediate variances and use uint64 instead;
Remove HalTimerIrqEn called in us_ticker.c
2017-09-15 18:53:24 +08:00
076b096efe
STM: I2C: Confifure pins in OpenDrainNoPull by default (no pullup)
...
As reported by MBED user Fran6Jack:
I2C bus are usually 5V tolerant on all STM32 processor.
If an external device on the I2C bus requires 5V operation,
we usually acheive it by using 5V external pull-ups on the bus.
Since signaling uses open-drain output on I2C for both signal SCL and SDA
any 5V tolerant MCU will work on a 5V I2C bus. Having pull-up activated on a 5V externally pull bus, cause the pin to clamp on the STM32 die diode and could damage the IC (There is a note in STM32 datasheet specifying this issue).
It is understood by all the community that I2C bus should always be
externally pulled by physical resistor. I2C initialization should then
be ALWAYS OpenDrainNoPull by default.
Up to now, this I2C driver was setting pull up by default as it helps
basic testing, like 1 master and 1 slave, conencted with 2 wires without
any external pull ups. This will not work anymore after this commit and
applications tests or examples needs to be modified to explicitely
configure pull ups ... But it is safer to follow reference manual
guidelines.
2017-09-14 17:15:11 +02:00
ca41a0f59d
Correct uninit region for nordic targets
2017-09-13 14:51:27 -05:00
45b59b442b
Correct long call macros for ARMC6
2017-09-13 09:48:55 -05:00
908ef68fc5
STM32 : Disable HSE XTAL choice from the default clock source
2017-09-13 14:49:25 +02:00
7b428916f5
Merge pull request #4949 from theotherjimmy/feature-armc5+armc6
...
NEW TOOLCHAIN: Add the ARMC6 Compiler
2017-09-13 10:39:15 +01:00
682816d86e
Sleep: Disallow sleep for targets turning of the systick clock at sleep entry.
...
When the RTOS is present and the tickless mode is not implemented, it is
expected that the next tick issued by the Systick timer will wake up the MCU.
However nothing prevents an implementation of the ARM architecture to gate the
systick clock signal upon sleep entry.
Therefore on those targets sleep shall be prohibited if the RTOS is present and the
tickless mode is not implemented.
To ease life of porters , a new option has been added in the device add list:
STCLK_OF_DURING_SLEEP. This option expose that the target turn of the systick
clock during sleep.
Targets which exhibit such behavior shall add this define in their device_has list.
2017-09-13 10:28:02 +01:00
32bd25e8df
Fix include file for ARMCC 6, should use cmsis_armclang.h
2017-09-12 16:41:11 +01:00
2955a0adc6
Merge pull request #5063 from 0xc0170/fix_lpticker_test
...
Fixing lp ticker and sleep manager tests
2017-09-11 22:28:52 +01:00
d3b33d75a4
Correct NRF SDK11 assembly
2017-09-11 13:20:33 -05:00
4f3f0cc9cc
Make Realtek link
...
There was some interesting stuff here.
* ARMC6 treats assembly the same as GNU, but has a different startup
function, so we branch the asm there
* Incorrect discriminant, probably copied from other ports
2017-09-11 13:20:33 -05:00
91afbce18a
Correct Nuvoton compiler detection logic
2017-09-11 13:20:33 -05:00
fb53eb65d4
Correct Silabs NVIC selection
...
Again, the culprit was that the discriminant did not include armc6
2017-09-11 13:20:32 -05:00
0b7a9033b5
Enable many STM devices with ARMC6
...
Yet another incorrect arm vs gcc discriminant
2017-09-11 13:20:32 -05:00
4da4c1f5ce
Correct compiler switching in Nordic code
2017-09-11 13:20:32 -05:00
cd4fd86f1f
Correct Freescale + NXP compiler detection macros
...
Also removes duplication of common files
2017-09-11 13:20:32 -05:00
15a9a0382b
Enable Compiling with ARMC6 across all targets
...
remove duplicate sys.cpp
2017-09-11 13:20:32 -05:00
65150b62b9
Added assert for malloc
2017-09-11 11:41:34 -05:00
cab660d980
Merge pull request #4938 from deepikabhavnani/IAR_fixes
...
Update IAR to version 8
2017-09-11 17:28:38 +01:00
cf8d6c49a7
Fix errors on NCS36510 after deep sleep
...
Add NOPs after deep sleep to prevent unexpected behavior. It appears
that the first one or two instructions after deep sleep do not get
executed properly.
Note - This is a temporary workaround. For a more robust solution
the NCS36510 needs to investigate the root cause of this issue.
2017-09-10 22:25:12 -05:00
acf428200f
Turn off tickless for the NCS36510
...
The NCS36510 is not suitable for tickless, since its LP ticker cannot
be scheduled fast enough. This is because it takes four 32KHz clock
cycles before these writes take effect - ~120us.
2017-09-09 20:43:37 -05:00
3f2e986256
Merge pull request #5012 from LMESTM/issue5004_ticker_16b
...
STM32_us_ticker_16b: keep code to cope with past event
2017-09-09 12:09:25 -05:00
48a0489955
Enable tickless for a subset of devices
...
Enable tickless on nrf5x devices and the NCS36510.
2017-09-07 21:35:07 -05:00
72f07ec4d9
Make room on stm32f07 for tickless
...
Decrease the interrupt stack from 2k down to 1k so there is enough
ram to build all the tests with tickless enabled. In general, targets
should not need an interrupt stack greater than 1k with mbed-os.
2017-09-07 21:35:06 -05:00
c3eae587eb
Add tickless support for devices without SysTick
...
Some Cortex-M0 devices, such as the nrf51, don't have the SysTick.
Instead, these targets use a software interrupt to simulate SysTick.
Add the hooks in the tickless code to support these devices. Targets
which do not have SysTick should now define NO_SYSTICK in targets.json
and implement mbed_get_m0_tick_irqn to add os suport.
This patch also removes os tick handling from the existing devices
(nrf51) since this is now handled in common code.
2017-09-07 21:35:04 -05:00
8dfb491bb1
Merge pull request #4958 from soramame21/master
...
Add bootloader support for DISCO_L476VG
2017-09-07 12:46:08 +01:00
ba3bb7ea35
Remove unused code
...
Clean rtl8195a_init.c a little bit
2017-09-07 15:10:08 +08:00
2642ab321e
Update wlan lib to fix debug profile
...
The issue of mutex returning osErrorISR with debug profile is fixed
2017-09-07 11:05:06 +08:00
1d6a69b3e6
Update MSP setup
...
Use asm code to set MSP
2017-09-07 10:58:45 +08:00
22b183a42b
Merge pull request #5037 from 0xc0170/fix_arch_pro_heap
...
Revert "Adjusting Stack size Allocation (IAR, LPC176x)"
2017-09-06 20:31:46 -05:00
7457bbbc5c
Merge pull request #4665 from Archcady/enable_sdram
...
Enable sdram usage of REALTEK_RTL8195AM
2017-09-06 14:26:34 -05:00
9b85155aa7
Merge pull request #4881 from betzw/betzw_freeze_github_wb
...
[STM32F401xE] Freeze master timer on stop/breakpoint
2017-09-06 14:25:47 -05:00
52f84810a7
mts targets: fix debug() usage
...
Instead of using #if NDEBUG, we can directly invoke debug() function. Fixes #5013
2017-09-06 15:56:01 +01:00
d12822f95a
Resolved compiler error: constructor deleted
...
IAR 8.x compiler throws error for emac_interface_t constructor
rtw_emac.cpp@220,0: [Pe1790]: the default constructor of "emac_interface"
cannot be referenced -- it is a deleted function
Error is because new object is created of structure with constant member.
Resolved it by using malloc instead new.
2017-09-06 09:51:17 -05:00
bb26bd6d2d
Revert "Adjusting Stack size Allocation (IAR, LPC176x)"
...
This reverts commit fce2ca2122
2017-09-06 13:56:27 +01:00
6fa766da50
Adjust whitespace in Odin PinNames file to fit verbose LED pin mappings
2017-09-05 13:43:06 -05:00
ffe84bd3f3
Add bootloader support for NXP FRDM-KW24D
2017-09-05 13:28:44 -05:00
2f2da779cb
Merge pull request #4924 from hasnainvirk/iar_fix_c027
...
Adjust Stack size Allocation (IAR, LPC176x)
2017-09-05 11:20:44 -05:00
5f9d984a22
Merge pull request #5013 from janjongboom/mts_printf
...
MTS targets: Don't use any printf() calls when NDEBUG is defined
2017-09-05 11:19:42 -05:00
34d41c5068
Merge pull request #4995 from kegilbert/odin-led-remap
...
Add LED color remapping definitions to Odin target
2017-09-05 11:17:42 -05:00
e009d9f7be
Merge pull request #4975 from LMESTM/STM32_SPI3W
...
Stm32 spi 3 wires mode support
2017-09-05 11:16:53 -05:00
94fb4a3aad
Merge pull request #4929 from bcostm/adc_sampletime_vrefint
...
STM32F4: Increase ADC sample time for VREF
2017-09-05 11:15:53 -05:00
f5aa7c7c82
STM32: Lock / Unlock flash for each operation
...
Rather than Unlocking flash during flash object creation, and leaving
the flash possibly continuously unlocked a(s object might bever be freed),
we decide to Unlock then Lock again at each erase or program call.
2017-09-05 17:49:07 +02:00
9c77957798
LPCXpresso LPC1769 board ported
...
The blinky example compiles and runs.
The board has a different eth phy component than mbed LPC1768. It requires a driver.
2017-09-05 15:30:14 +01:00
e588011394
STM32 USBDevice: Add USB_STM_HAL macro for disco-f469ni
2017-09-05 14:08:51 +02:00
67f1ee5343
Resolve including directory issue in GCC linker script for Ameba
...
Should not make assumption of specific directory when include .h from
linker script
2017-09-05 19:11:38 +08:00
f2eb77a81a
STM32_us_ticker_16b: reset counter when fire interrupt
...
Fixing regression introduced in commit
"Ticker: add fire interrupt now function".
In above mentioned commit, the management of timestamp being in the past
has been moved to higher layer (hal/mbed_ticker_api.c), but the reset of
oc_int was missing when implementing the new us_ticker_fire_interrupt
function - which is fixed now.
2017-09-05 13:03:21 +02:00
5997811d46
STM32: F2: put can_s struct under DEVICE_CAN option
...
In case of F2 devices without CAN support.
2017-09-05 10:27:21 +02:00
04ac65a4e6
STM32: CAN: restore registers after can_reset
...
After reset the MCR register content needs to be restored so we're
introducing the can_registers_init function to be called at the first
init stage, but also after reset. We also store the can frequency to
go through the initialisation phase again.
2017-09-05 10:27:21 +02:00
8357f6fe77
STM32: CAN: store the mode in object context
...
In order to apply the same mode in case of reset, we store the current
requested mode in the HAL structure.
To make storage in a single place, we also change can_monitor to call
can_mode function as they actually acting on same registers.
2017-09-05 10:27:21 +02:00
57222b604f
STM32: CAN: do not overwite BTR register when setting frequency
...
BTR register has other bits than the ones calculated and set through
the can_speed function, so let's take care to only write to the
right registers.
2017-09-05 10:27:21 +02:00
759642af8e
STM32: Define CAN handle as part of can object
...
Instead of a static object, this will make driver
instantiation more robust and allow to re-use init
configuration on a need basis.
The CANName struct member is actually the CAN registers base address,
which is now available in the CanHandle.Instance field, so we don't need
CANName anymore.
2017-09-05 10:27:21 +02:00
66162c6b1d
STM32: move can_s definition to common_objects.h
...
This will ease up further changes to the structure.
2017-09-05 10:27:21 +02:00
b0dd984493
Merge pull request #4939 from c1728p9/crash_on_boot
...
Fix crashes on boot on some Kinetis devices
2017-09-04 16:51:22 +01:00
5b4e0b30df
Merge pull request #4963 from NXPmicro/Fix_NVIC_NUM_VECTORS
...
K66F,KW24D,K22F,K64F: Fix NVIC_NUM_VECTORS value
2017-09-04 16:50:32 +01:00
675a17cff2
Merge pull request #4980 from LMESTM/stm32_flash_update
...
Stm32 flash update
2017-09-04 16:49:18 +01:00
fce2ca2122
Adjusting Stack size Allocation (IAR, LPC176x)
...
Since mbed-os 5.4.3, something increased foot print of mbed-os and the applications that were barely fitting in started to spill.
IAR toolchain for LPC176x target family is set to use 2 RAM regions (32K each). RAM region
2 is being used for ETH/USB and 1 is being used for vector table, stack/heap/static data.
In this commit we have decreased heap size allocation from 8K to 7K so that the is more room for stack and static data.
2017-09-04 14:54:42 +03:00
72262ca0b3
MTS targets: Don't use any printf() calls when NDEBUG is defined, prevents linking out printf() and friends in release build
2017-09-04 12:05:41 +01:00
b01cc966b0
Introduce TIMEOUT_1_BYTE
...
This makes the code more explicit about what is last parameter of
HAL_SPI_Transmit/HAL_SPI_Receive functions.
2017-09-04 11:16:49 +02:00
b402b7a8c6
Fix crash on boot due to vector size mismatch
...
If NVIC_NUM_VECTORS is larger than the space allocated by the vector
table in ram (__ram_vector_table_size__) then the call to mbed_cpy_nvic
during boot will corrupt valid data, which can lead to a crash. This
patch fixes the declared number of vectors on the KL27Z, KL43Z and
KL82Z to fix this crash.
2017-09-01 18:43:38 -05:00
41000e091c
Add LED color remapping definitions to Odin target
2017-09-01 17:00:24 -05:00
7773acd78c
arduino connector namings added
2017-08-31 15:18:14 +02:00
04461acf5e
Remove HAL_GetUID_12Bytes function from stm32l4xx_hal layer.
2017-08-31 15:21:22 +09:00
87ce631490
Fix a parse error at targets/targets.json.
2017-08-31 11:18:31 +09:00
40b0d961b6
extra label deleted
2017-08-30 08:16:08 +02:00
82f5ce22f8
Merge pull request #4951 from JanneKiiskila/ublox_odin_buttons
...
UBLOX_EVK_ODIN_W2- add BUTTON1/2 definitions
2017-08-29 13:46:10 -05:00
318e92c028
Merge pull request #4950 from OpenNuvoton/nuvoton_usb
...
M487: Support USB device/host
2017-08-29 13:45:55 -05:00
d68cd09c63
Merge pull request #4944 from LMESTM/F1_AFIO_CLK
...
STM32: F1 GPIO: Enable AFIO clock
2017-08-29 13:45:27 -05:00
defb8ebf41
Add bootloader support configuration for DISCO_L476VG.
2017-08-29 19:01:25 +09:00
dacf04e69b
STM32: Flash: cover TARGET_F410RB case
...
There was a comilation error for NUCLeO_F410RB as it does not have
a ADDR_FLASH_SECTOR_5.
2017-08-29 11:42:51 +02:00
9bed429aa0
STM32: L1: Activate FLASH API for NUCLEO_L152RE
2017-08-28 16:21:33 +02:00
f8114f2295
[STM32F401xE] Freeze master timer on stop/breakpoint
2017-08-28 14:29:47 +02:00
c834b7faac
Fix bugs for RTL8195AM with debug profile of compilers
...
1. Add alignment / padding for postbuild segments
2. Clear tcm.bss section
3. Remove TRAP_OverrideTable(), move lines to PLAT_Start()
2017-08-28 19:04:26 +08:00
a9468c09e3
STM32: F7 Flash API support
...
Adding flash API support to STM32F7 family. The code is derived from
F4 family one. The memory topology is described in flash_data.h files
and the flash_api.c implementation manages the 2 possible memory types (1
or 2 banks).
2017-08-28 10:23:55 +02:00
e6631c02a4
STM32: adjust flash.get_page_size() to minimum programable size
...
Users of FlashIAP usually get the minimum programable size
by calling flash.get_page_size(), so let's return the minimum
to allows a most efficient usage of flash.
For F4 devices, this is 1 byte.
For L0 and L1 devices, this is a word (4 bytes).
For L4 devices, this is a double word (8 bytes).
2017-08-25 17:21:30 +02:00
3de2ce9c10
STM32: Add Flash API support to STM32F413xH
...
First add the flash_data.h that describe the flash memory topology,
and also activate FLASH support for the corresponding targets.
This is a 1,5MB flash memory device which contains 15 sectors, where
sectors 12 to 15 are 128KB sectors. So flash_api.c needed has been
updated to differentiate between this flash memory and the 2MB ones
by checking existence of sector 16 instead of sector 12.
2017-08-25 17:21:30 +02:00
4b62cf015c
STM32: Add Flash API support to STM32F469xI
...
First add the flash_data.h that describe the flash memory topology,
and also activate FLASH support for the corresponding targets.
2017-08-25 17:21:08 +02:00
86ad16f5f8
STM32: Add Flash API support to STM32F410RB
...
First add the flash_data.h that describe the flash memory topology,
and also activate FLASH support for the corresponding targets.
2017-08-25 17:20:40 +02:00
645fd0f06d
STM32: Add Flash API support to STM32F4 devices with 512KB Flash
...
First add the flash_data.h that describe the flash memory topology,
and also activate FLASH support for the corresponding targets.
2017-08-25 17:20:13 +02:00
436d97c9f9
new target added L-TEK FF1705
...
based on XDOT
2017-08-24 22:11:10 +02:00
3926b56cd8
Merge pull request #4935 from LMESTM/F410RB_ARM_TC
...
STM32: fix F410RB vectors size
2017-08-24 10:16:31 -05:00
d2793ede5e
Merge pull request #4922 from gorazdko/bug-fix-clock-config-xdot
...
bug fix: xdot clock config
2017-08-24 10:15:25 -05:00
7252447385
Merge pull request #4920 from scartmell-arm/led-error-sequence
...
Modify LED error sequence to be more recognisable
2017-08-24 10:14:13 -05:00
0a063a00fd
Merge pull request #4840 from ganesh-ramachandran/master
...
Add Support for TOSHIBA TMPM066 board
2017-08-24 10:13:09 -05:00
c5b66b85ba
K66F,KW24D,K22F,K64F: Fix NVIC_NUM_VECTORS value
...
Signed-off-by: Mahadevan Mahesh <Mahesh.Mahadevan@nxp.com>
2017-08-23 10:50:12 -05:00
c530be0eeb
Fix stack underflow issue
...
Switch on TCM
2017-08-23 16:12:07 +08:00
4b9b174c7f
Add function to read 12byte HW RoT over STM32L4xx.
2017-08-23 11:06:44 +09:00
1e398cfc60
Add RTL8195AM support for mbed client with IAR
...
Move ticker related code to SRAM due to time drift sensitive
2017-08-22 17:34:00 +08:00
e16c2d2833
Add RTW8195AM support for mbed client with ARMCC
...
Move ticker related code to SRAM due to time drift sensitive
2017-08-22 17:33:41 +08:00
2e6cd907d4
UBLOX_ODIN_EVK_W2 - add BUTTON1/2 definitions
...
UBLOX_ODIN_EVK_W2 is missing the abstract button definitions originally
introduced with PR https://github.com/ARMmbed/mbed-os/pull/4249 .
Fix two tab to spaces issues on the go as well.
2017-08-22 09:54:53 +03:00
cacc444b73
[M487] Support USB device/host
2017-08-22 09:27:31 +08:00
316c875136
Merge pull request #4926 from bcostm/merge_l053x8
...
STM32L053x8: Refactor NUCLEO_L053R8 and DISCO_L053C8 targets
2017-08-21 10:38:42 -05:00
bb7ab1942a
Merge pull request #4896 from pilotak/patch-1
...
target BLUEPILL_F103C8 compile fix
2017-08-21 10:37:01 -05:00
d4fa585ac4
STM32: F1 GPIO: Enable AFIO clock
...
It is required to enable AFIO clock before using __HAL_AFIO_REMAP_xy
macros, which was missing here. Without clocks enable, the remap
actually doesn't occur. This would possibly cause some PIOs (part of
PB_3, PB_4, PA_13, PA_14, PA_15) to not behave as expected.
In most cases AFIO clock was enabled in stm_pin_SetAFPin function, so
that this bug was not visible. But there were few cases left were
stm_pin_DisconnectDebug would be called first. A typical case was
with GCC_ARM in case a DigitalInOut variable is declared as global.
2017-08-21 13:32:33 +02:00
95fc6d0bad
STM32: fix F410RB vectors size
...
On F410RB, the size reserved to vectors with ARM toolchains was not properly
defined,which was not the case for other toolchains.
This would cause few tests to fail like EXAMPLE_1 with below error:
HOST: Unknown property: mbed assertation failed: _ptr == (T *)&_data, file: C:/github/mbed/BUILD/mbed/platform/SingletonPtr.h, line 91
2017-08-18 11:57:51 +02:00
d0fce353cc
STM32F4: Set ADC sample time to max value for VRefInt
2017-08-17 16:12:16 +02:00
8c99bf3b62
SPI: HAL: disable IP at the end of transmit
...
in case of 1LINE direction
2017-08-17 11:02:43 +02:00
6dfafc7293
STM32: SPI: Use LL in spi_slave_read
...
this is more a cosmetic change, but since LL was introduced, we can now
use it here as well.
2017-08-17 11:02:43 +02:00
57371ea591
STM32: SPI: Do not enable SPI during Init if 3W
...
Enabling SPI causes the clock to be output by default.
Most devices will not care about extra clock cycles, especially as long
as chip select is not active, nevertheless this may cause side issues
with other devices especially during init phase.
This was actually the case with a 3 wire device (LPS22HB sensor).
2017-08-17 11:02:43 +02:00
4f20cfc0be
STM32: SPI: SPI3W / SPI_DIRECTION_1LINE management
...
In case MISO is not passed at SPI init, then we consider a 3 wires SPI
configuration is requested, which corresponds to SPI_DIRECTION_1LINE
configuration parameter in STM32 HAL layer.
We're then handling this specific case of SPI_DIRECTION_1LINE,
in spi_master_write or spi_master_block_write, we call to HAL API
2017-08-17 11:02:43 +02:00
8273e371df
STM32L053x8: Align system_clock.c files
2017-08-17 10:55:18 +02:00
34bd3e5c14
xdot: fix target clock config in targets.json
...
Resolves #4876
2017-08-17 10:37:17 +02:00
f79216c8d8
Issue with mbed compile for GCC_ARM tool resolved
...
Functions 'serial_break_set' & 'serial_break_clear' wrongly removed during 'SERIAL_FC disabled, critical section API Updation' commit.
Due to this 'mbed compile' command for GCC_ARM tool fails to compile.
2017-08-17 11:14:09 +05:30
552feccca3
Main stack dependant on GCC toolchain removed
2017-08-17 10:54:26 +05:30
48ee6a0fb6
Clear interrupt and delta check removed
2017-08-17 10:54:26 +05:30
9dca3fe5df
Interrupt and Overflow check for us_ticker
2017-08-17 10:54:26 +05:30
0a781c4f04
ADC Reset Conflict Fixed
...
ADC Reset conflict with already configured ADC pins is fixed
2017-08-17 10:54:25 +05:30
624620b0d2
SERIAL_FC disabled, critical section API Updation
...
SERIAL_FC disabled, critical section API and Format changes updated
2017-08-17 10:54:25 +05:30
bd8fa4eb70
Added Support for Toshiba TMPM066
2017-08-17 10:54:25 +05:30
794d4f657f
STM32L053x8: Add STM32L053x8 label in targets.json
2017-08-16 17:10:43 +02:00
580c7cb0b6
STM32L053x8: cleanup ARM compiler files
2017-08-16 17:10:42 +02:00
9b8bb9eec4
STM32L053x8: Move other folders and files
2017-08-16 17:10:42 +02:00
04cefd300d
STM32L053x8: Create folder and move objects.h
2017-08-16 17:10:42 +02:00
9c87f5936c
Unified the LED error pattern for all boards
...
- Removed the patterned LED sequence, all boards now use the 4 fast pulse, 4 slow pulses LED sequence.
- Changed the LED used from LED_RED to LED1. Only 58/174 targets seem to define LED_RED but they all define LED1.
- Removed all ERROR_RED and ERROR_PATTERN definitions from targets/targets.json
2017-08-16 11:55:24 +01:00
7653f65434
Merge pull request #4878 from jeromecoutant/PR_ADC_INTERNAL
...
STM32 : internal ADC channels
2017-08-14 11:42:30 -05:00
1c41a9b920
Merge pull request #4869 from toyowata/lpc_spi_fix
...
HAL LPCs SPI: Fix mask bits for SPI clock rate
2017-08-14 11:40:25 -05:00
96074417b2
Merge pull request #4863 from Archcady/RTWInf
...
Optimize memory usage of wifi scan for REALTEK_RTW8195AM
2017-08-14 11:39:59 -05:00
d10d5af28a
Merge pull request #4842 from NXPmicro/Fix_Analogout
...
Add call to DAC_Enable as this is no longer done as part …
2017-08-14 11:38:38 -05:00
0f0a461209
Merge pull request #4832 from OpenNuvoton/nuvoton
...
NUC472/M453: Fix several startup and hal bugs
2017-08-14 11:38:18 -05:00
069b2536bf
Merge pull request #4812 from deepikabhavnani/nxp_spi
...
Use DSPI SDK driver API's in SPI HAL driver
2017-08-14 11:37:52 -05:00
98720b0ae2
Merge pull request #4809 from betzw/betzw_ticker_github_wb
...
STM32: Align HAL & US tickers
2017-08-14 11:36:52 -05:00
25bcc2795e
Merge pull request #4808 from betzw/betzw_idle_github_wb
...
Make HAL & US tickers idle safe
2017-08-14 11:36:35 -05:00
2766e56e3d
Merge pull request #4801 from bcostm/fix_can_issue_4763
...
STM32 CAN: Fix issue with speed function calculation
2017-08-14 11:36:17 -05:00
097720670e
Merge pull request #4631 from OpenNuvoton/nuvoton_nano130
...
Add new target NUMAKER_PFM_NANO130
2017-08-14 11:35:58 -05:00
0150f58e12
Merge pull request #4608 from OpenNuvoton/nuvoton_m487
...
Support Nuvoton's new target NUMAKER_PFM_M487
2017-08-14 11:35:33 -05:00
410a345b70
Enable crypto HW acceleration for STM32F437xG platforms (i.e. ublox C030 family).
2017-08-14 11:44:13 +01:00
2bc224bc2f
target BLUEPILL_F106C8 compile fix
...
INITIAL_SP missing when compile, here is a quick fix
2017-08-13 15:32:11 +02:00
2a9c88c1b0
Use DSPI SDK driver API's in spi block read
2017-08-11 10:22:23 -05:00
8a1c7fab79
Merge pull request #4813 from jacobjohnson-ON/master
...
Dual Flash and Hex file support on NCS36510
2017-08-11 11:50:15 +01:00
00ab1fd6b2
Merge pull request #4852 from janjongboom/cortexm0p_bugs
...
SAM_CortexM0P uses uninitialized memory in i2c and uses out of bounds array in pwmout
2017-08-10 09:38:53 -05:00
95ca29930f
Merge pull request #4851 from janjongboom/stm32f4_wrong_erase
...
STM32F4_HAL_MMC erase command check is wrong. == has higher precedence than &
2017-08-10 09:38:25 -05:00
8a8553e8a0
Add call to DAC_Enable as this is no longer done as part of DAC_Init
...
Fixes Issue #3999
Signed-off-by: Mahadevan Mahesh <Mahesh.Mahadevan@nxp.com>
2017-08-10 09:36:48 -05:00
215a7906d3
Change to use copy assignment operator for RTWInterface::scan
2017-08-10 17:36:05 +08:00
346209ed2f
[NANO130] Adjust the stack size in IAR toolchains
2017-08-10 15:35:02 +08:00
e2dc67750c
Make HAL & US tickers idle safe
2017-08-09 14:29:57 +02:00
1c948283be
Merge pull request #4805 from NXPmicro/Update_K64F_DSPI_SDK_Driver
...
K64F: Update the DSPI SDK driver to support the new API to change DUM…
2017-08-09 10:24:07 +01:00
54a32e0410
STM32L1 : internal ADC channels
2017-08-09 11:01:40 +02:00
726f207ee8
STM32L0 : internal ADC channels
2017-08-09 11:01:36 +02:00
27bf7d21d1
STM32F7 : internal ADC channels
2017-08-09 11:01:32 +02:00
803ab189fc
STM32F4 : internal ADC channels
2017-08-09 11:01:27 +02:00
3826ad23f6
STM32F3 : internal ADC channels
2017-08-09 11:01:23 +02:00
63ccfa0958
STM32F1 : internal ADC channels
2017-08-09 11:01:19 +02:00
aff3478519
STM32F0 : internal ADC channels
2017-08-09 11:01:14 +02:00
da7fa0dd2a
[HAL LPC43xx] Fix mask bits for SPI clock rate
2017-08-09 16:51:31 +09:00
72e8241ee0
[HAL LPC408x] Fix mask bits for SPI clock rate
2017-08-09 16:51:31 +09:00
cb9b2b0456
[HAL LPC13xx] Fix mask bits for SPI clock rate
2017-08-09 16:51:31 +09:00
db2da2e932
[HAL LPC11xx_11Cxx] Fix mask bits for SPI clock rate
2017-08-09 16:51:31 +09:00
aa334b0d3e
[HAL LPC11Uxx] Fix mask bits for SPI clock rate
2017-08-09 16:51:31 +09:00
fdc071d5e8
[HAL LPC11U6x] Fix mask bits for SPI clock rate
2017-08-09 16:51:31 +09:00
9ad17b21a2
[HAL LPC176x] Fix mask bits for SPI clock rate
2017-08-09 16:51:31 +09:00
f200db3e84
STM32F4: fix for 2nd back sector
...
Use ADDR_FLASH_SECTOR_12 as this is defined by target (the flash size varies, for
instance for some F437xx is up to 2MB (2nd bank might not be there)).
2017-08-08 09:50:19 +01:00
c7dd95d9b8
STM32F437: remove flash api implementation
...
STM32F4 already contains generic flash api implementation, use it.
2017-08-08 00:13:47 +02:00
0e1c20d8e7
Merge pull request #4854 from adustm/STM32F412_flash_boot
...
NUCLEO_F412ZG add flash driver and bootloader support
2017-08-07 10:28:14 -05:00
9c81ba8766
Merge pull request #4835 from u-blox/c030_bootloader
...
Add bootloader support for the UBLOX_C030 platforms.
2017-08-07 10:27:56 -05:00
f9d0304a81
SAM_CortexM0P HAL accesses uninitialized memory
...
Uses uninitialized memory in I2C, and accesses an out of band array in pwmout
2017-08-07 11:15:48 +02:00
f24a40906a
Use placement new to optimize wifi scan
2017-08-07 11:23:30 +08:00
9d0e9dd8de
Move DEVICE_FLASH define to avoid compilation issues for non FLASH devices
2017-08-04 10:09:27 +02:00
44c8d16243
Add bootloader support
2017-08-03 15:07:14 +02:00
8bd7b595d8
Move flash_api.c to STM32F4 level + add flash_data.h for STM32F412 device
...
add FLASH to targets.json
2017-08-03 14:14:05 +02:00
54929f6aee
STM32F4_HAL_MMC erase command check is wrong. == has higher precedence than &
2017-08-03 13:03:36 +02:00
f8af225dda
[M487] Remove support for uVisor core debug message via STDIO
...
This is necessary. Otherwise, program will hang in uninitialized STDIO UART because uVisor core doesn't enable it.
2017-08-03 18:48:31 +08:00
04578b6a11
[M487] Add back device_name in target description
2017-08-03 13:53:48 +08:00
9ac0d90937
[M487] Move target configuration from mbed_lib.json to targets.json
2017-08-03 13:40:32 +08:00
afb5aba8d9
[M487] Fix compile warnings with IAR toolchain
2017-08-03 13:33:17 +08:00
99d12b1eb8
[M487] Fix compile warnings with GCC_ARM toolchain
2017-08-03 11:10:15 +08:00
56a98e11d1
Move ticker related text to SRAM to fix GCC mbed-os-tests-mbed_drivers-timeout failing issue
2017-08-03 11:06:24 +08:00
b31d6f6eaa
[M487] Fix compile warnings with ARM toolchain
2017-08-03 09:24:05 +08:00
1d06bf4279
Disambiguate function __memset() in rtl8195a_init.c
...
When use ARMCC, __memset is replaced by ARM's version which will make
boot process hang.
2017-08-01 17:45:04 +08:00
49a7e4b59e
Fix GCC compile errors
2017-08-01 17:03:01 +08:00
35d7ca27be
rtl8195am - fix ARMCC SRAM + SDRAM porting
...
Signed-off-by: Tony Wu <tonywu@realtek.com>
2017-08-01 15:29:21 +08:00
1e51dfa302
[Silicon Labs] cryptographic acceleration support
...
Initial commit of mbed TLS hardware acceleration drivers for Silicon Labs parts
2017-08-01 09:25:19 +02:00
6b8724b27d
[NUC472] Sync SPI mode with NUC472 BSP V3.02.001
2017-08-01 14:40:54 +08:00
d885de6ec5
[NUC472/M453] Move target configuration from mbed_lib.json to targets.json
2017-08-01 14:40:48 +08:00
8092c3611b
[NUC472/M453] Add comment for Receive Time-out IF in SPI HAL
2017-08-01 14:40:42 +08:00
c7fcd071e9
[NUC472/M453] Add sanity check for serial format
2017-08-01 14:40:37 +08:00
5e335de67e
[NUC472/M453] Set LED4 to LED1
...
No real LED4. Just for passing ATS.
2017-08-01 14:40:31 +08:00
ea1de8c9a8
[NUC472/M453] Remove mbed_sdk_init_forced()
...
1. With mbed OS 5, mbed_sdk_init() is ensured to call before C++ global object constructor.
2. Refine startup file with GCC_ARM toolchain related to this modification.
2017-08-01 14:40:25 +08:00
6c9fda4e3e
[NUC472/M453] Fix lp_ticker typo
2017-08-01 14:40:20 +08:00
ea7a0fdf74
[NUC472/M453] Add comment in gpio_irq_init()
2017-08-01 14:40:14 +08:00
46cb684a32
[NUC472] Conform to mbed TLS H/W acceleration support
2017-08-01 14:40:08 +08:00
8067f9ac91
[NUC472/M453] Move SystemInit() to register unlock range for perhaps future protected register access
2017-08-01 14:40:02 +08:00
2844be6434
[NUC472/M453] Fix RTC time doesn't continue across reset cycle
2017-08-01 14:39:57 +08:00
c4df35d1b5
[NUC472/M453] Fix region end address error with IAR toolchain
2017-08-01 14:39:50 +08:00
306d8449b3
[M487] Remove NVIC_SetVector/NVIC_GetVector to match updated boot flow
2017-08-01 10:53:40 +08:00
670822a581
[M487] Update spi_master_block_write() API
2017-08-01 10:47:39 +08:00
bc7193508e
[M487] Fix GCC linker script with uVisor
2017-08-01 10:37:28 +08:00
52d5a61e29
[M487] Fix include file error in case-sensitive environment
2017-08-01 10:37:27 +08:00
0803267eab
[M487] Add ticker API us_ticker_fire_interrupt and lp_ticker_fire_interrupt
2017-08-01 10:37:26 +08:00
b54e7e9639
[M487] Remove debug code in I2C HAL
2017-08-01 10:37:25 +08:00
ed5ef0cc54
[M487] Refine coding style
2017-08-01 10:37:16 +08:00
7b564c7f52
[M487] Add comment for Receive Time-out IF in SPI HAL
2017-08-01 10:32:50 +08:00
7cfb7ae8f8
[M487] Add sanity check for serial format
2017-08-01 10:32:48 +08:00
7a60b35d52
[M487] Set LED4 to LED1
...
No real LED4. Just for passing ATS.
2017-08-01 10:32:46 +08:00
Mahadevan Mahesh
Tony Wu
Andrzej Puzdrowski
andreas.larsson
Helmut Tschemernjak
bcostm
Steven Cooreman
jeromecoutant
Veijo Pesonen
Laurent MEUNIER
Jimmy Brisson
ccli8
sarahmarshy
Michael Kaplan
gorazd
Martin Kojtal
Marko Fabo
Dave Wu
cyliangtw
Steven Cooreman
Bartek Szatkowski
Bartosz Szatkowski
Marcus Chang
Ashok Rao
Yuguo Zou
danclement
Jammu Kekkonen
johnny
Boting Ren
Andrea Corrado
Kevin Gilbert
Anna Bridge
amq
misodengaku
Piotr Grygorczuk
iotvietmember
maclobdell
Pavel Sorejs
Roberto Spelta
Pierre-Marie Ancele
adustm
Nabil Elqatib
Chris Snow
Seppe Stas
Vincent Coubard
Russ Butler
mbedNoobNinja
Deepika
Russ Butler
Dexter Fryar
Hasnain Virk
Jan Jongboom
Wolfgang Betz
Janne Kiiskilä
mapellil
Ganesh Ramachandran
Steve Cartmell
Rob Meades
Pavel Slama
MS30 CCChang12
toyowata
Tony Wu