ARMmbed
/
mbed-os
mirror of https://github.com/ARMmbed/mbed-os.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
14,958 Commits
52 Branches
336 Tags
624 MiB
Commit Graph

2607 Commits (7275ee862636e6a13d32bc3efa3fe865162aa1e5)

Author SHA1 Message Date
ccli8 7275ee8626 [Nuvoton] Fix SPI DMA transfer 
1. Disable unnecessary TX/RX threshold interrupts to avoid potential trap in DMA transfer
2. Start TX/RX DMA transfer simultaneously to fit H/W spec and avoid potential RX FIFO overflow issue
 2018-03-26 10:58:18 +08:00
ccli8 9e72756878 [Nuvoton] Use vector rather than SPI_CTL_SPIEN_Msk to judge if asynchronous transfer is on-going (spi_active) 2018-03-26 10:50:14 +08:00
ccli8 643d772cf9 [Nuvoton] Introduce SPI_ENABLE_SYNC/SPI_DISABLE_SYNC to simplify enable/disable control 2018-03-26 10:34:22 +08:00
Cruz Monrreal 6659084d72
Merge pull request #6367 from li-ho/ev-cog-flash-api-fix 
ADI: Fix on chip flash minimal programmable unit size
 2018-03-19 11:19:17 -05:00
Cruz Monrreal 0adef8a959
Merge pull request #6379 from bcostm/dev_DISCO_L496AG 
DISCO_L496AG: Add new platform
 2018-03-19 11:18:27 -05:00
Cruz Monrreal 1aa78d1e8c
Merge pull request #6326 from M-ichae-l/rtl8195am-gpio-toggle-slow-fix 
rtl8195am : fix gpio toggle slow
 2018-03-16 13:16:17 -05:00
Cruz Monrreal 05e72dc729
Merge pull request #6353 from jeromecoutant/PR_RTC_LSE 
STM32 RTC init
 2018-03-16 11:45:13 -05:00
Cruz Monrreal 02130a282e
Merge pull request #6346 from 0xc0170/fix_6252 
Fix for #6252
 2018-03-16 11:43:31 -05:00
bcostm 974917809d DISCO_L496AG: remove morpho connector in targets.json 2018-03-16 10:02:12 +01:00
bcostm f59f7581fb DISCO_L496AG: add entry in mbed_rtx.h 2018-03-16 10:02:12 +01:00
bcostm 64a824abd2 DISCO_L496AG: add system clock file (same as Nucleo) 2018-03-16 10:02:12 +01:00
bcostm 5c484aaf3d DISCO_L496AG: add platform in targets.json file 2018-03-16 10:02:12 +01:00
bcostm ade8583044 DISCO_L496AG: add other pins related files 2018-03-16 10:02:11 +01:00
bcostm 63901a803c DISCO_L496AG: remove QSPI2 
Base adress not found in registers map file but found in CubeMX xml file.
 2018-03-16 10:02:11 +01:00
bcostm eab3e95158 DISCO_L496AG: add PeripheralPins.c 2018-03-16 10:02:11 +01:00
Cruz Monrreal 6eeee5e49f
Merge pull request #6292 from juhaylinen/rtw-fixes 
rtl8195am - improve credentials handling
 2018-03-15 10:57:39 -05:00
Cruz Monrreal 95fb33f041
Merge pull request #6198 from codeauroraforum/Add_LPC54XXX_Flash_Support 
Flash support: Add flash support for LPC54114 & LPC546XX
 2018-03-15 10:49:08 -05:00
Cruz Monrreal 69bc68d21f
Merge pull request #6288 from TomoYamanaka/master 
Fix macro definition of iodefine_typedef for RZ_A1H
 2018-03-15 10:48:02 -05:00
Cruz Monrreal 842a86ad7c
Merge pull request #6310 from codeauroraforum/Fix_K82F_I2C 
MCUXpresso: Fix test failures seen with ci-test shield
 2018-03-15 10:41:08 -05:00
Cruz Monrreal 872634d5fa
Merge pull request #6311 from hosse005/master 
mts_mdot_f411re: Fix for Multi-Tech mDot IAR linker script
 2018-03-15 10:40:18 -05:00
Cruz Monrreal d05417a941
Merge pull request #6315 from amq/efm32_faster_gpio_irq 
EFM32: make gpio interrupts faster by offloading expected pin state check to user
 2018-03-15 10:39:29 -05:00
li-ho b26b682902 Fix on chip flash minimal programmable unit size 
- sector size is 0x800 bytes
- writeable unit size is 0x8 bytes
- flash start address is 0x0
- total ADuCM3029 on chip flash size is 0x40000 bytes
- total ADuCM4050 on chip flash size is 0x7F000 bytes
 2018-03-15 16:50:06 +11:00
zzw 44ed2c8189 fix mbed-ci build error L6216E 
fix mbed-ci build  error L6216E
* (.ARM.exidx) and *(.init_array) must be placed explicitly, otherwise it is shared between two regions, and the linker is unable to decide where to place it.
 2018-03-15 11:01:09 +08:00
Cruz Monrreal 5523d53f83
Merge pull request #6287 from codeauroraforum/Update_usticker 
MCUXpresso_MCUS: Apply K64F us_ticker fix across all MCU's
 2018-03-14 13:56:34 -05:00
jeromecoutant 2f86b3a7bb STM32 RTC init 
When LSE is configured for RTC, LSI is not affected
 2018-03-14 11:12:29 +01:00
Martin Kojtal d6a0a94010 WISE_1570: use hex as output 
Fixes #6252. Use hex rather than binary - use the hex format validation.
 2018-03-13 13:52:11 +00:00
Martin Kojtal dd84f32043 STM32L486: fix two ram region define for GCC ARM 
Based on the changes for other targets, these 2 were left.
 2018-03-13 13:51:59 +00:00
Martin Kojtal 7917e12eb0 MIMXRT: define PullUp default value 
This target defines few PullUp values, one should be defined to be PullUp that
an application can use. We use the same value as PullDefault
 2018-03-12 09:21:24 +00:00
zzw 20b33637f6 rtl8195am : fix gpio toggle slow 
Ameba has two memory blocks: SDRAM(2M) and SRAM(512KB). SRAM has better access performance than SDRAM. So some timing critical codes must be moved to SRAM.

fix for mbed-os issue #5778

rebase for #6289
 2018-03-12 14:10:40 +08:00
amq 82ecf7e81a Make gpio interrupts faster by offloading expected state check to user 2018-03-09 16:10:10 +01:00
Mahesh Mahadevan 5230bcaf6f MCUXpresso: Update the I2C implmentation for byte read and write 
1. Start function: Issue repeat start when bus is busy
2. Byte write function: Do not call SDK function as this does
   not work for some of the Kinetis device
3. Byte read function: Do not call SDK function as this would
   issue a START and STOP signal which is not required for
   I2C byte functions

Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
 2018-03-09 08:32:22 -06:00
Mahesh Mahadevan 53fa4e5fc4 MCUXpresso: Enable I2C SDA & SCL pins internal pullup resistors 
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
 2018-03-09 08:18:21 -06:00
Mahesh Mahadevan d29c12d233 K82F: Fix I2C test failures seen with ci-test shield 
I2C3 clock define was missing. I2C3 is connected to the Arduino
connector which is used by the ci-test shield

Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
 2018-03-09 08:04:54 -06:00
Evan Hosseini 94616e6396 mts_mdot_f411re: Fix for Multi-Tech mDot IAR linker script 2018-03-08 16:41:34 -06:00
Martin Kojtal cf4c7a5d35
Merge pull request #6164 from ashok-rao/br-BL652 
Adding Laird BL652 as new target
 2018-03-08 17:45:01 +01:00
Martin Kojtal 4e7ad0dc95
Merge pull request #6226 from M-ichae-l/mbed-os_ci-test-fixed_rtl8195am 
rtl8195am: fix ARM section error
 2018-03-08 17:43:07 +01:00
Mahesh Mahadevan 3f302961e1 Flash support: Add flash support for LPC54114 & LPC546XX 
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
 2018-03-07 13:06:41 -06:00
Mahesh Mahadevan 7ed36e4986 MCUXpresso_MCUS: Apply K64F us_ticker fix across all MCU's 
Applied changes from commit b6a01de070
for other MCUXpresso MCUs

Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
 2018-03-07 07:27:04 -06:00
Juha Ylinen 1a5e751d0f rtl8195am - improve credentials handling 
Add checks for empty strings
set_channel() not supported for STA mode wifi driver
 2018-03-07 14:14:35 +02:00
TomoYamanaka 3183d21ba7 Fix macro definition of iodefine_typedef for RZ_A1H 
Regarding RZ_A1H, Since I removed the macro definition accidentally in iodefine_typedef, I fixed the lack of it.
 2018-03-07 20:33:11 +09:00
Cruz Monrreal fb0eba4cd2
Merge pull request #6235 from gorazdko/lpc546xx-fixes 
mcu_lpc546xx: move "release_versions" to children and fix clock
 2018-03-06 20:41:56 -06:00
Cruz Monrreal 8a7b390fdd
Merge pull request #6102 from Ultimaker/master 
Add support for STEVAL-3DP001V1 board
 2018-03-06 20:41:41 -06:00
Cruz Monrreal 2e69ddd989
Merge pull request #6202 from maximmbed/fix-max32625mbed 
Fix max32625mbed
 2018-03-06 20:41:10 -06:00
Ashok Rao 008e937524 Incorporating review comments 2018-03-06 15:38:02 +00:00
Cruz Monrreal 1d3e59aa7c
Merge pull request #6275 from marcuschangarm/fix-uart-init 
NRF52: Customize STDIO pins from config system
 2018-03-06 08:19:21 -06:00
Marcus Chang 812b9be6d3 NRF5: Customize STDIO pins from config system 2018-03-05 10:12:18 -08:00
Cruz Monrreal f1d493dd0c
Merge pull request #6228 from OpenNuvoton/nuvoton_1timer_ticker 
Nuvoton: Rework us_ticker/lp_ticker with one H/W timer
 2018-03-05 10:19:56 -06:00
Cruz Monrreal 38e62759a9
Merge pull request #6246 from u-blox/i2c_fix 
C030 platform I2C initialisation fix
 2018-03-05 10:12:57 -06:00
paul-szczepanek-arm 8347e76bf4 Merge https://github.com/ARMmbed/mbed-os 2018-03-01 18:11:41 +00:00
Rob Meades c53fb9dc64 Call i2c_init() before i2c_frequency() (since i2c_frequency() requires the object to be set up) and zero the I2C object before giving it to i2c_init() as i2_init() has to set up a default frequency for its timeouts to work and it will only do this if the hz field in the object was zero to begin with (otherwise you end up with a random but usually very large indeed timeout). 2018-03-01 14:52:42 +00:00