ARMmbed
/
mbed-os
mirror of https://github.com/ARMmbed/mbed-os.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
1,492 Commits
52 Branches
336 Tags
624 MiB
Commit Graph

746 Commits (d57a23dd6e37a8b92073a94ad1daaeecd64865cb)

Author SHA1 Message Date
Toyomasa Watarai ca527e4dd9 Corrected wrong pin names 2014-02-19 19:25:20 +09:00
0xc0170 cd46fa2a73 CMSIS system for KL05Z update 
- clocking from external 32kHz is set by default
 2014-02-19 08:52:59 +01:00
sg- be8cccd16f Tabs to spaces... 2014-02-18 14:16:46 -06:00
sg- a09c1a724f Added some PinNames for Arduino compatibility and cleaned up white spaces 2014-02-18 14:12:40 -06:00
sg- 1f50bfc7c5 Update peripheral pin mapping and pin names 2014-02-18 12:08:11 -06:00
Emilio Monti 8583716513 Merge pull request #174 from Sissors/master 
Properly round non integer bus-frequencies in MHz
 2014-02-18 17:48:06 +00:00
Sissors 65d66455c0 Properly round non integer bus-frequencies in MHz 
PIT prescaler now rounds to nearest instead of down. Since when FLL is
used (default on KL05Z, but also possible on others), the bus
frequencies is 23.986MHz, rounding down is bad.
 2014-02-18 18:40:33 +01:00
bcostm fd0754864e [NUCLEO_xxx] Fix issue with ticker + add volatile 2014-02-18 16:40:54 +01:00
Emilio Monti a8f17f5426 Fix DAC initialization# 2014-02-18 13:59:58 +00:00
Emilio Monti 10297b352c Merge pull request #172 from bcostm/master 
[NUCLEO_xxx] Fix us_ticker and analog_out issues when -O3/-Otime options are used
 2014-02-18 11:02:46 +00:00
Emilio Monti 18bc485181 Merge pull request #170 from sg-/kl05_uarm 
Added uARM support for KL05Z and added target to build_release.py. Also ...
 2014-02-18 10:20:59 +00:00
Emilio Monti a2a5490f5d Merge pull request #171 from Sissors/master 
Fixed LPC1114 InterruptIn for Port1 (and higher)
 2014-02-18 10:19:35 +00:00
bcostm c482ad79a1 [NUCLEO_L152RE] Fix issue with analog_out and -O3/Otime options 2014-02-18 10:56:16 +01:00
bcostm 1c2bc03f99 [NUCLEO_xxx] Fix us_ticker issue 2014-02-18 09:34:32 +01:00
bcostm 636114b4d1 Merge branch 'master' of https://github.com/mbedmicro/mbed 2014-02-18 08:19:31 +01:00
Sissors 8da53457ab Fixed LPC1114 InterruptIn for Port1 (and higher) 
Channel was only calculated using bits set, port number was ignored.
 2014-02-18 07:58:25 +01:00
sg- bded790c9b Added uARM support for KL05Z and added target to build_release.py. Also updated uvision4.py to UBLOX_C027 from previous name C027 2014-02-17 22:12:16 -06:00
Emilio Monti b87dac9fce fix us_ticker issue for Nucleo boards 2014-02-17 16:13:40 +00:00
tkuyucu 4d767c0dc8 Updated Sleep 
using WFE for nordic sleep
Removed systemoff call from deepleep since it does not retain program
state.
 2014-02-17 15:54:39 +01:00
tkuyucu cfb9b992c3 Merge remote-tracking branch 'upstream/master' 2014-02-17 11:25:54 +01:00
tkuyucu 4f6b0b6443 nordic_global.h file now included 2014-02-17 10:31:20 +01:00
bcostm 19b70d8833 [NUCLEO_xxx] Add other #pragma O0/Ospace for ticker 2014-02-17 09:10:14 +01:00
Toyomasa Watarai 01cfe17b3d [LPC1549] Added InterruptIn support 2014-02-16 22:38:09 +09:00
bcostm e9ff16fa11 [NUCLEO_xxx] Change code optimization for us_ticker_read() 
Fix issue when the hal is compiled with -O3 -Otime
 2014-02-16 12:13:42 +01:00
ytsuboi a2f2f44258 [LPC1549] Added I2C master support 2014-02-15 18:23:06 +09:00
Toyomasa Watarai 95f4057499 [LPC1549] Added AnalogIn support 2014-02-15 15:18:35 +09:00
tkuyucu d7dae24aaa Removed UICR edit. 2014-02-14 12:32:04 +01:00
Toyomasa Watarai e2a47d9daa [LPC1549] Corrected wrong pin name 2014-02-14 19:14:05 +09:00
Toyomasa Watarai 5fbea95fe2 [LPC1549] Added Arduino Shield Receptacles Names 2014-02-14 16:18:48 +09:00
bcostm fda11bae82 [NUCLEO_xxx] Fix issue with attach_us function 2014-02-13 14:11:01 +01:00
Toyomasa Watarai 1c2e2ce572 [LPC1549] Fixed us_ticker problem 2014-02-13 17:00:25 +09:00
Toyomasa Watarai 07706f0821 [LPC1549] Added SPI support 2014-02-13 16:52:38 +09:00
ytsuboi 78d4c7345b [LPC1549] Added UART support 2014-02-12 23:43:27 +09:00
ytsuboi 5f1f6c7417 [LPC1549] put PINASSIGN0-15 to PINASSIGN[] on LPC15xx.h 
and fixed typo on system_LPC15xx.c
 2014-02-12 16:13:00 +09:00
bcostm 156be94791 [NUCLEO_F401RE] Add uvision exporter + remove compilation warning 2014-02-11 21:08:36 +01:00
bcostm 90c261a513 Merge branch 'master' of https://github.com/mbedmicro/mbed 2014-02-11 16:50:40 +01:00
bcostm e9394fc5f5 Add exporters for NUCLEO_L152RE and F030R8 2014-02-11 16:38:37 +01:00
Emilio Monti 17499c34d2 Remove stm32f4xx_hal_msp template 2014-02-11 14:51:18 +00:00
Toyomasa Watarai 741bfc22b1 [LPC1549] Fixed GPIO 
Clean-up PinNames.h and GPIOrelated functions.
 2014-02-11 23:18:59 +09:00
ytsuboi e06e842221 [LPC1549] initial commit 2014-02-11 15:54:38 +09:00
bcostm ddce5e741d [NUCLEO_F103RB] Correction in SPI clock setting. 2014-02-10 16:33:45 +01:00
bcostm adab2d9fbc [NUCLEO_F401RE] Correction in GPIO setting (wrong macro used). 2014-02-10 15:17:46 +01:00
Emilio Monti 9272cdeb45 Merge pull request #161 from bcostm/master 
Add NUCLEO_F401RE, improvements
 2014-02-08 19:33:17 +00:00
bcostm 3a64c7f9d5 [NUCLEO_F401RE] Add toolchain_arm_micro files 2014-02-08 19:12:37 +01:00
sg- fad5c27038 Add default interrupt handler for Freescale NMI_b pins. 2014-02-07 18:20:45 -06:00
sg- 7ef411e7fb Clean up tabs to spaces 2014-02-07 18:13:02 -06:00
sg- 5237b766e6 Updated PinMap PinMap_PWM for KL05Z, KL25Z and KL46Z targets. Should support all MCU pins 2014-02-07 18:07:11 -06:00
tkuyucu 026b6610a8 Merge remote-tracking branch 'upstream/master' 
Conflicts:
	libraries/tests/mbed/portinout/main.cpp
	libraries/tests/mbed/portout_portin/main.cpp
	libraries/tests/mbed/sd/main.cpp
	libraries/tests/mbed/spi_slave/main.cpp
	workspace_tools/targets.py
	workspace_tools/toolchains/arm.py
	workspace_tools/toolchains/gcc.py
	workspace_tools/toolchains/iar.py
 2014-02-07 11:04:50 +01:00
tkuyucu 9b701f6a49 No Ports reduced to 1 
Licensing headers replaced with mbed Apache.
SPI/SPIS pin configuration is done via PIN_CNF
 2014-02-07 10:28:34 +01:00
bcostm e69063a971 [NUCLEO_F401RE] Add Cube F4 driver V1.0.0RC2 2014-02-07 09:40:12 +01:00
bcostm c08d507168 [NUCLEO_F401RE] Many corrections on pinmap, RTC, ... 2014-02-07 09:36:31 +01:00
bcostm 4ee89986b7 [NUCLEO_F103RB] Update mapping file. 
Solve compilation error with flash.
 2014-02-07 09:33:15 +01:00
bcostm a3d0a9bd96 [NUCLEO_F401RE] Add cmsis files 2014-02-05 18:08:43 +01:00
bcostm 99b0820eb3 [NUCLEO_F401RE] Add hal files 2014-02-05 17:58:01 +01:00
tkuyucu 43fe5a4e44 Hardcoded location for FWID is used. 2014-02-04 15:03:44 +01:00
bcostm 01fc443ef8 Add missing interrupt enable 2014-02-04 13:03:00 +01:00
tkuyucu b77d61416f UICR values are written by the SystemInit, if missing. 2014-02-04 10:20:40 +01:00
tkuyucu 1eba6888b4 debug comments removed 2014-02-04 08:33:54 +01:00
tkuyucu 08c145aaa6 files and folders renamed to remove case sensitivity 2014-02-04 08:32:34 +01:00
tkuyucu 84b2255ce2 Reformatting 2014-02-03 16:36:23 +01:00
tkuyucu 804188a6f7 Clean up and Reformatting 
Unused header files are removed from the cmsis dir.
Tab characters replaced by 4 spaces.
Brackets and parenthesis formatted.
Spi slave functions updated for faster response.
 2014-02-03 10:33:34 +01:00
bcostm 4ad143ae95 Typo corrections 2014-02-01 22:05:45 +01:00
bcostm ae20d141c5 [NUCLEO_F030R8] Remove timer update interrupt in sleep 2014-02-01 19:15:23 +01:00
bcostm 2663367dc5 [NUCLEO_L152RE] Remove timer update interrupt in sleep 
Otherwise the first update interruption will wake-up the MCU.
 2014-02-01 19:05:03 +01:00
bcostm 3fba65b769 [NUCLEO_F103RB] Update to std periph driver V3.6.1 2014-02-01 18:48:55 +01:00
bcostm b275fc579a [NUCLEO_F103RB] Change ticker to use one timer... 
and add another pwm output.
 2014-02-01 13:27:56 +01:00
bcostm 0110c3eec4 [NUCLEO_L152RE] Add PWM output, ticker with one timer 
The us_ticker uses now only one timer instead of two. Another PWM output
on TIM4 has been added.
 2014-01-31 18:14:31 +01:00
bcostm e9fe1394a5 Merge branch 'master' of https://github.com/mbedmicro/mbed 2014-01-31 11:41:14 +01:00
Bogdan Marinescu 2665d5bac4 Modified call-before-main mechanism 
Added a new function (mbed_sdk_init) that can be used by the SDK itself to
do initializations before main() is called.
 2014-01-31 11:58:18 +02:00
Bogdan Marinescu 74409cbd59 Re-apply 178f881566 on top of the new changes 2014-01-31 11:50:35 +02:00
Bogdan Marinescu f2e1518220 Merge branch 'master' of git://github.com/Sissors/mbed into Sissors-master 
Conflicts:
	libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KL05Z/analogin_api.c
	libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KL05Z/analogout_api.c
	libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KL05Z/gpio_api.c
	libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KL05Z/i2c_api.c
	libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KL05Z/pinmap.c
	libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KL05Z/pwmout_api.c
 2014-01-31 11:46:22 +02:00
bcostm a865de928b [NUCLEO_F030R8] Add pwmout api 2014-01-31 10:32:11 +01:00
Bogdan Marinescu 2a782f5067 Merge pull request #149 from cobrid/master 
Remove unnecessary semicolons.
 2014-01-31 00:55:41 -08:00
Bogdan Marinescu 6c4dc5cd33 Merge pull request #155 from sg-/c027_lpc1768_refactor 
Forgot to add this file...
 2014-01-31 00:54:56 -08:00
bcostm 6a30215feb [NUCLEO_F030R8] Modify us_ticker to use only one timer 2014-01-31 08:27:46 +01:00
Sissors fb3fe6003a Put PeripheralPin constant values in .c files, definitions in .h 2014-01-30 18:19:34 +01:00
sg- 1db40f89a7 Forgot to add this file... 2014-01-30 09:55:50 -06:00
bcostm 77bb1560ba [NUCLEO_L152RE] Change SPI frequency setting 2014-01-30 15:30:33 +01:00
bcostm ca173a1867 [NUCLEO_F030R8] Add SPI api, corrections in I2C 2014-01-30 15:29:07 +01:00
Bogdan Marinescu dba523f83f Merge pull request #154 from bcostm/master 
Update of I2C, SPI, SLEEP for NUCLEO_F103RB and L152RE
 2014-01-30 04:02:04 -08:00
bcostm 08941aaba1 [NUCLEO_L152RE] Add sleep api 2014-01-30 11:14:59 +01:00
Bogdan Marinescu 6e82b54538 Merge branch 'c027_lpc1768_refactor' of git://github.com/sg-/mbed into sg--c027_lpc1768_refactor 
Conflicts:
	workspace_tools/export/uvision4.py
 2014-01-30 11:31:56 +02:00
bcostm 90f7a2b80d [NUCLEO_L152RE] Change AF setting before GPIO setting 2014-01-30 10:13:59 +01:00
bcostm f712477c36 [NUCLEO_F103RB] Change AF setting before GPIO setting 2014-01-30 10:13:35 +01:00
bcostm 3ace84aece [NUCLEO_F030R8] Change AF setting before GPIO setting 2014-01-30 10:13:16 +01:00
bcostm 955223fd2c [NUCLEO_L152RE] Update std periph driver to V1.3.0 2014-01-30 09:53:14 +01:00
bcostm 6f06f6ecd2 [NUCLEO_L152RE] Correction on I2C gpio configuration + code cleanup 2014-01-30 09:49:51 +01:00
bcostm 740f801bb5 [NUCLEO_F103RB] Correction on I2C gpio configuration 2014-01-30 09:48:57 +01:00
tkuyucu 05d6525285 Pwm timer interrupt priority set to 1. 
When timer interrupt priority is at 3, the pwm functionality can be
disturbed by an active ble connection.
 2014-01-30 09:24:53 +01:00
bcostm 139f4fb16f [NUCLEO_L152RE] Add SPI api 2014-01-30 07:56:35 +01:00
sg- 28f0cf71b3 Update to macro test in board.c, remove C027.cpp(h), set default IO in mbed_main and fixed copy paste error in MBED_LPC1768 reserved_pins.h 2014-01-29 22:33:41 -06:00
bcostm 3c54df796f [NUCLEO_F103RB] Minor corrections on I2C master api 2014-01-29 15:17:10 +01:00
Sissors 67972d03af Replaced tabs by spaces 
Now Martin is happy :)
 2014-01-29 14:43:26 +01:00
sg- f1fa9a0c25 Added support for C027. Small re-factor to LPC1768 to accommodate this. 2014-01-28 20:44:32 -06:00
Sissors 2c2bf35a77 Refactored KLXX code 
See description. Everything HAL wise went into KLXX, with target
specific in subfolders. Only interrupt and spi are in target specific
since they are target specific.

Also you cannot set the uart anymore for 9 or 10 databits (the code
supported it to set it like that, but the actually read/write only did
8-bits)
 2014-01-28 18:57:07 +01:00
bcostm 015887091d [NUCLEO_F030R8] Add I2C master api 2014-01-28 16:17:18 +01:00
0xc0170 178f881566 KL05Z/LPC1768 coide tmpl, KL05Z GCC warnings fixed 
- LPC1768 - coide has issues with CMSIS-DAP debugging, already reported.
	  Added this template but not enabled yet.
	- KL05Z export for coide
	- KL05Z - supressed warnings in HAL
 2014-01-27 20:37:58 +01:00
Bogdan Marinescu 887fc11980 Merge pull request #151 from bcostm/master 
[NUCLEO_F030R8] Fix vectors remap in RAM issue and more...
 2014-01-27 07:25:03 -08:00
bcostm 6866978792 [NUCLEO_F030R8] Fix vectors remap in RAM issue and more... 
Improve gpio api, add gpio_irq, add sleep.
 2014-01-27 15:53:00 +01:00
Bogdan Marinescu a31ec9c5f7 Merge pull request #150 from bcostm/master 
Add NUCLEO_L152RE
 2014-01-27 06:22:13 -08:00
bcostm 1ccef1a441 [NUCLEO_L152RE] Improvements of gpio and gpio_irq api 2014-01-27 10:02:15 +01:00
bcostm d14992dcfd [NUCLEO_F103RB] Improvement of gpio and gpio_irq api 2014-01-27 09:59:07 +01:00
Chiel de Roest 8b3cdc0067 Remove unnecessary semicolons. 
Remove unnecessary colon that was placed in all SPI drivers for NXP
targets.
 2014-01-24 22:49:09 +01:00
neilt6 8e346fc498 Fixed sleep and disabled semihosting on LPC11U35 
I created 3 separate device.h headers for the three LPC11UXX targets,
and disabled the features that the LPC11U35 board doesn't have like
Semihosting and LocalFileSystem. I also made the call to
mbed_interface_disconnect() require DEVICE_SEMIHOSTING, which prevents
calls to sleep() from hanging the system on an LPC11U35.
 2014-01-24 10:51:48 -07:00
bcostm 4afc4e4a3b [NUCLEO_F030R8] Add rtc api 2014-01-24 14:52:13 +01:00
bcostm c9bd30590f [NUCLEO_L152RE] Add rtc api 2014-01-24 14:51:43 +01:00
bcostm 3adc6b41df [NUCLEO_F030R8] Add analogin api 2014-01-24 12:17:15 +01:00
bcostm 81482e6d92 [NUCLEO_L152RE] Add gpio_irq api 2014-01-22 18:36:35 +01:00
bcostm 486ebece6b [NUCLEO_F030R8] Add serial api 2014-01-22 17:59:04 +01:00
bcostm a5726b883b [NUCLEO_F030R8] Add gpio, port, ticker api, cmsis files 2014-01-22 17:53:54 +01:00
tkuyucu 689a484d23 Stack and heap initialization is removed from the startup file. This solves the mbed runtime problems with the SoftDevice enabled. 2014-01-22 13:58:30 +01:00
bcostm e577faef66 [NUCLEO_L152RE] Add analog out api 
and add macros for GPIOs, change master timer for ticker.
 2014-01-22 08:22:01 +01:00
bcostm e3e5180256 [NUCLEO_F103RB] Cleanup code 
Add STM_PIN and STM_PORT macros for GPIOs.
 2014-01-22 07:48:10 +01:00
bcostm 0af4419c74 Merge branch 'master' of https://github.com/mbedmicro/mbed 2014-01-20 18:09:48 +01:00
bcostm f27e93cf3f [NUCLEO_L152RE] Add analog out api 2014-01-20 17:45:35 +01:00
bcostm 23e383be36 [NUCLEO_L152RE] Add pwmout api 2014-01-17 17:14:29 +01:00
bcostm a2efcd2c92 [NUCLEO_L152RE] analog_in improvement 2014-01-16 13:25:43 +01:00
bcostm e5b641777a [NUCLEO_L152RE] Add analogin api 2014-01-16 13:16:35 +01:00
Bogdan Marinescu 8ef99f8562 Merge pull request #145 from Sissors/master 
Added MCGPLLFLL clock function, squished some 'bugs'
 2014-01-14 14:12:48 -08:00
Sissors 153a9ddb49 Added MCGPLLFLL clock function, squished some 'bugs' 
PWM bug mentioned here:
https://mbed.org/questions/2315/BUG-Exporting-to-ARM-GCC-does-not-work-n/

Fast internal osc prescaler wasn't taken into account at us_ticker
interrupt clock source, now it is.
 2014-01-14 22:57:43 +01:00
0xc0170 937430a130 clk freq header file 
- HAL clock improvement
 2014-01-14 17:51:09 +01:00
0xc0170 4e5993e7ee Merge branch 'master' into dev_k20d5m_testing 2014-01-14 15:47:22 +01:00
bcostm ffb7f13018 [NUCLEO_F152RE] Correction in pinmap 2014-01-14 10:14:08 +01:00
bcostm ba5866b35e [NUCLEO_L152RE] Fix bugs with gpio and serial 2014-01-13 14:20:27 +01:00
Bogdan Marinescu f1904ba15c Merge pull request #140 from Sissors/master 
KL46Z: Added Sleep, LED3 and LED4 definitions, switches
 2014-01-13 02:37:11 -08:00
bcostm cbfdc4e26d [NUCLEO_L152RE] Cleanup in available ports/pins 2014-01-13 10:27:47 +01:00
bcostm bef6fdf339 [NUCLEO_F103RB] Code cleanup, correction in pins definition 2014-01-13 09:24:31 +01:00
Sissors aa0f7a7026 Added clk_freqs.h for clock related functions 
Serial now also works when PLL/FLL is disabled and extosc is available.

us_ticker tries to divide extosc to 1MHz, otherwise use fast internal
oscillator
 2014-01-11 19:10:36 +01:00
Sissors ebdbf53ba1 Updat PWM prescaler correctly 2014-01-11 09:40:10 +01:00
Sissors eedce209c5 Removed hardcoded frequencies, replaced by automatically calculated 
ADC frequency 1.5MHz -> 6MHz (if possible, otherwise it tries as close
to, but less than 6MHz)
pwm tries to get its clock as close as possible to 1MHz, but not lower
than 1MHz
 2014-01-10 21:45:26 +01:00
bcostm 7d145c8dc4 [NUCLEO_L152RE] Add first files (gpio, pinmap, us_ticker) 2014-01-10 17:46:18 +01:00
tkuyucu fdb41b0ccb serial will choose the nearest lower baudrate if an unsupported value is chosen. 2014-01-10 15:53:43 +01:00
tkuyucu 29560a3195 SPI and I2C will accept unsupported frequencies and match them with the closest available frequency instead of generating an error. 
Sleep is now implemented (deepsleep will cause nrf to work in System OFF mode).
 2014-01-10 14:21:43 +01:00
tkuyucu c7eabcd977 Interrupt priorities set to low application level (3) in order to ensure no conflict with the SD. 2014-01-09 14:03:20 +01:00
Andreas Rebert e8b09cbc2d [LPC4088] Corrected an invalid header file dependecy. 2014-01-09 09:10:10 +01:00
Andreas Rebert 1448b871c1 [LPC4088] Making it possible to reserve stack space by weak function. 2014-01-09 08:52:33 +01:00
Andreas Rebert 3157d5afb2 [LPC4088] Making it possible to reserve stack space by weak function. 2014-01-09 08:51:30 +01:00
Sissors 7df2622a76 SPI clock fix for KL05Z and KL46Z 2014-01-09 07:57:45 +01:00
Andreas Rebert a1a2fec259 [LPC4088]: Corrected RAM size in linker script (ARM_GCC) 2014-01-09 07:44:15 +01:00
Sissors ed7954f5ac Fixed KL25Z SPI clock 
https://mbed.org/questions/2309/spifrequency-for-KL25Z/
 2014-01-08 21:00:40 +01:00
0xc0170 4732796ab4 PWM channels definition update, serial uses external global variable system clock 2014-01-08 17:32:28 +01:00
0xc0170 ffac7e6d6a PWM - pwmload removed from the objects header file 2014-01-08 12:05:11 +01:00
tkuyucu 694f9c726c fixes and updates after the mbed unit tests have been carried out. 2014-01-08 11:14:19 +01:00
0xc0170 889952790f PWM - mux addition 2014-01-08 10:58:51 +01:00
0xc0170 a6e45b7d38 spi - disable rx/tx fifo, write/readable flags change 2014-01-07 20:23:54 +01:00
Sissors e5f13c047c Added Sleep, LED3 and LED4 definitions, switches 
Sleep = KL25Z sleep (verified to work correctly)
LED3 = LED1, LED4 = LED2 (for compatibility, similar to LED3 = LED4 in
KL25Z code)
SW1 and SW3 for the two switches (SW2 is reset switch)
 2014-01-07 18:35:41 +01:00
0xc0170 5d95041620 PWM - legacy mode, LOAD use for updating 2014-01-06 18:43:17 +01:00
bcostm dace8653e6 [NUCLEO_F103RB] Remove HSE re-configuration in sleep code. 2014-01-06 15:07:49 +01:00
bcostm 989c66165c Merge branch 'master' of https://github.com/mbedmicro/mbed 2014-01-06 11:22:35 +01:00
Bogdan Marinescu b311c56b44 Merge pull request #138 from ytsuboi/master 
[LPC812] Add SPISlave function
 2013-12-31 07:25:41 -08:00
ytsuboi 4fbf286ee3 [LPC812] change ssp_busy() to check RXOV 2013-12-31 20:24:46 +09:00
0xc0170 aa501c003b Shared PORT interrupt - check improved 
- clocks must be enabled and also interrupt detected, otherwise
	  interrupt handler is not invoked.
 2013-12-31 08:34:12 +01:00
0xc0170 a384d1d875 pwm channel 7 correction, enhanced mode 2013-12-30 18:12:01 +01:00
0xc0170 dc19dcbb94 fix - KL46Z cmsis header (v2.2), shared interrupt PORTCD 
- Ports C and D sharing same interrupt vectors
	- KL46Z CMSIS header update
	- InterruptIn methods irq_disable/enable comment update
 2013-12-30 12:19:24 +01:00
0xc0170 8d7c3da179 i2c clock from global clock value, syntax corrections 2013-12-30 11:39:36 +01:00
ytsuboi 0a11767877 [LPC812] enable SPISlave 2013-12-29 19:18:50 +09:00
0xc0170 ee7c33d055 K20D5M default irq handler 2013-12-26 12:11:32 +01:00
0xc0170 15e246fc9f Merge branch 'master' into K20D50 2013-12-26 09:05:11 +01:00
0xc0170 63526032d9 K20D5M flash algo for template 2013-12-26 09:03:19 +01:00
0xc0170 78140c4aa1 LPTMR timer - OSCEN set, GCC startup vectors add 2013-12-25 20:02:56 +01:00
Bogdan Marinescu 82aa7b7f2b Enable RTOS with GCC_CR 
1. Provide the required __end__ symbol
2. Call software_init_hook() if present, which in turn starts the RTOS

The fix was applied for all targets with a TOOLCHAIN_GCC_CR folder,
but it only works with LPC1768 and LPC4088 because of incomplete or
missing support for GCC_CR and/or the RTOS for the other targets.
Tested by running RTOS_1, RTOS_2 and RTOS_3 with LPC1768 and LPC4088.
 2013-12-24 23:13:50 +02:00
0xc0170 b73b57db26 I2C, pullup 2013-12-23 20:56:48 +01:00
0xc0170 c9a029ce6f Merge branch 'master' into K20D50 2013-12-23 20:01:05 +01:00
0xc0170 366221524a SPI, RTC, Serial changes 
- SPI - implementation
	- RTC - there's 32.768kHz crystal, use that as a source
	- Serial - 10bit transfer
 2013-12-23 19:57:10 +01:00
tkuyucu eb5fd7d6e0 timer overflow sync issue fixed. 2013-12-20 16:37:28 +01:00
Bogdan Marinescu 728084c52f Merge pull request #134 from Joey-Ye/master 
Clean up GCC_ARM startup code
 2013-12-20 06:53:16 -08:00
Joey Ye feacef8f3a Clean up GCC_ARM startup code 2013-12-20 15:08:20 +08:00
Bogdan Marinescu 425e197ba6 Fix missing case in flow control code 2013-12-19 17:59:24 +02:00
tkuyucu 4756fb3a51 timer interrupts implemented correctly. TimeOut and Ticker classes should work. 2013-12-19 15:53:11 +01:00
tkuyucu f0994c710b SoftDevice is now enabled by the startup code by calling EnableSoftDevice (defined in system_nRF51822). 2013-12-19 15:09:09 +01:00
Bogdan Marinescu 5f62a399db Added preliminary printf() support to RawSerial 2013-12-19 15:05:17 +02:00
bcostm 28120ffb19 [NUCLEO_F103RB] Change license text in ALL target files 2013-12-19 11:44:15 +01:00
tkuyucu 76d25ffb25 16-bit timer with sw overflow is used instead of the 32-bit timer. 2013-12-19 10:41:16 +01:00
Bogdan Marinescu 34a43eaa41 Merge branch 'flow_control' 
Conflicts:
	workspace_tools/tests.py
 2013-12-19 11:36:45 +02:00
Bogdan Marinescu bb8ed20a47 LPC1768 flow control fixes 
- Disable TX buffer, this isn't compatible with the software CTS implementation
- Properly set hardware RTS/CTS pins when possible
- Modified test to use hardware CTS and software RTS
 2013-12-19 11:31:23 +02:00
Yihui Xiong 6501b16213 Merge remote-tracking branch 'upstream/master' 2013-12-19 12:38:04 +08:00
Yihui Xiong a3465b5eac fix 16bit timer pwm output 2013-12-19 12:31:31 +08:00
Joey Ye 9213137011 Discard \r change as pull request rejected 2013-12-19 09:30:18 +08:00
tkuyucu 3c2258956b AnalogIn, Interrupts, and I2C are added. 2013-12-18 15:04:16 +01:00
0xc0170 988894e837 Merge branch 'master' into K20D50 2013-12-17 16:13:27 +01:00
bcostm 9702a131d4 Merge branch 'master' of https://github.com/mbedmicro/mbed 2013-12-17 11:10:12 +01:00
Bogdan Marinescu c560db3233 Merge branch 'KL46_DEV' of git://github.com/sg-/mbed into sg--KL46_DEV 
Conflicts:
	README.md
 2013-12-17 12:06:12 +02:00
bcostm c84b8f9193 [NUCLEO_F103RB] Use HSI/LSI instead of HSE/LSE 
Due to Nucleo board revision C requirements.
 2013-12-17 11:04:28 +01:00
Bogdan Marinescu 572b22395f Merge pull request #129 from bcostm/master 
[NUCLEO_F103RB] InterruptIn, Sleep, RTC added
 2013-12-17 00:41:36 -08:00
Bogdan Marinescu 2fb9de927c Merge pull request #127 from 0xc0170/dev_KL05Z_exporters 
Dev kl05 z exporters
 2013-12-17 00:40:49 -08:00
sg- 33ae2fe364 Updates to comments and README.md to add new target links 2013-12-16 18:41:39 -06:00
sg- 4445a11673 Add pulldown support to PinMode enum and fix pullup value to match register definition 2013-12-16 13:05:13 -06:00
bcostm adce27f269 [NUCLEO_F103RB] Add RTC 2013-12-16 14:33:58 +01:00
bcostm f8ecc9be46 [NUCLEO_F103RB] Allow ACK polling with I2C (again) 
Go back to the last modification made by Bogdan.
 2013-12-16 10:13:31 +01:00
bcostm 967509de53 [NUCLEO_F103RB] Add sleep 2013-12-16 09:56:00 +01:00
0xc0170 5747a4502d One section for vectors and flash protection bits. The unused space is filled with 0xff 2013-12-15 23:30:03 +01:00
0xc0170 f7cee14193 KL05Z GCC support, exporters for arm_gcc, uvision 2013-12-15 11:54:44 +01:00
bcostm 956064b4bc [NUCLEO_F103RB] Add InterruptIn 2013-12-14 18:53:57 +01:00
Bogdan Marinescu bb3d95e9e5 Merge branch 'master' of github.com:mbedmicro/mbed 2013-12-13 13:37:50 +02:00
Bogdan Marinescu 1ae5a1d340 Added pin definitions for LPC11U35 quick stard board 2013-12-13 13:35:19 +02:00
Bogdan Marinescu da605b82a5 Merge pull request #126 from bcostm/master 
[NUCLEO_F103RB] Update PWM IOs used + I2C cleanup
 2013-12-13 01:29:29 -08:00
Bogdan Marinescu a164c6f498 [NUCLEO_F103RB] Allow ACK polling with I2C 2013-12-12 20:00:02 +02:00
bcostm 18136e3f09 [NUCLEO_F103RB] Update PWM IOs used + I2C cleanup 2013-12-12 15:44:21 +01:00
Bogdan Marinescu bd51e4eb73 Merge pull request #123 from bcostm/master 
[NUCLEO_F103RB] Add I2C master, code cleanup, ...
 2013-12-12 02:34:48 -08:00
Anders Lindvall 0c774294fb LPC4088 target fixes 
- changed scatter file to keep all the code in the internal flash
- added tests for SPIFI memory usage
 2013-12-12 12:29:00 +02:00
bcostm 2310b4c031 [NUCLEO_F103RB] Code cleanup 2013-12-12 10:35:04 +01:00
bcostm a129b8f8fa [NUCLEO_F103RB] Add more generic signal names for the examples. 2013-12-11 18:38:35 +01:00
Bogdan Marinescu c3d4d3079f Added DEVICE_SERIAL_FC as an indicator for the flow control implementation 2013-12-11 10:26:18 +02:00
bcostm 37b8acad68 [NUCLEO_F103RB] Code cleanup 2013-12-10 16:46:15 +01:00
0xc0170 5e9e53f934 PWM - changes to start the channel 2013-12-10 15:57:43 +01:00
bcostm 5ebce384b5 [NUCLEO_F103RB] Align startup files with other targets 2013-12-10 11:14:56 +01:00
bcostm d44996c26c Merge branch 'master' of https://github.com/mbedmicro/mbed 2013-12-10 10:35:26 +01:00
Bogdan Marinescu faee2bf073 [NUCLEO_F103RB] Serial interrupt fixes 
- use TC flag instead of TXE for TX interrupt
- clear interrupt flags to prevent possible interrupt storm
 2013-12-09 13:01:39 +02:00
Bogdan Marinescu 2b8e05e002 [NUCLEO_F103RB] Timer fixes 
- the timer data structures were not properly initialized
- changed slave timer mode to external clock 1 (section 15.3.15 of the manual)
- avoid a possible race condition when concatenating the values of the
  two 16-bit timers
 2013-12-07 14:26:54 +02:00
tkuyucu 3faaff74ee PwmOut working. 2013-12-06 15:30:58 +01:00
Joey Ye b747181e0d Add \r in retarget 2013-12-06 18:06:11 +08:00
tkuyucu 105c31bcb3 SPISlave works. 2013-12-06 10:01:28 +01:00
tkuyucu 4ba79b77b4 SPISlave works. pwm_out works but needs more work to properly implement 0 pulse and 100% pulse. 2013-12-06 09:59:40 +01:00
Bogdan Marinescu 53cd64775d Hardware flow control implementation for LPC81X 2013-12-05 17:33:16 +02:00
Bogdan Marinescu 2ac6c4c531 Fixed RTS/CTS bit-banging on LPC1768 2013-12-04 19:46:12 +02:00
Bogdan Marinescu fbeb52d613 Added RTS/CTS flow control 
Currently implemented only for LPC1768. On this platform, when hardware
flow control is not directly supported, it will be emulated.
Also added "not_implemented.c" as a placeholder for various HAL functions
that might not be implemented on all platforms (in this particular case,
serial_set_flow_control). These are weak implementations that default to a
"not implemented" error message.
 2013-12-04 19:42:11 +02:00
bcostm 0aa8b93e26 NUCLEO_F103RB: Add I2C master api 2013-12-04 11:17:10 +01:00
Bogdan Marinescu 3f82e7fa6f Use correct scatter file for LPC4088 2013-12-03 11:04:37 +02:00
tkuyucu 685274563e Port, Buffer, DigitalInOut, and Spi (master) works. 2013-12-02 16:33:08 +01:00
Bogdan Marinescu 49df530ae7 Merge pull request #118 from bcostm/master 
Add STMicroelectronics NUCLEO_F103RB target
 2013-12-02 03:15:58 -08:00
Bogdan Marinescu 6aaa134516 Merge pull request #117 from Sissors/master 
Added (deep)sleep to KL25Z
 2013-12-02 01:55:33 -08:00
bcostm 3bcf77e4f7 NUCLEO_F103RB: minor changes 2013-12-02 09:22:28 +01:00
Sissors 9f89a4d218 Added (deep)sleep to KL25Z 
Sleep is wait mode

Deepsleep is very low power stop mode

During the interrupt that removes it from deepsleep it will run at low
speed until the PLL is automatically re-enabled after the interrupt.
 2013-11-30 19:28:00 +01:00
0xc0170 d8d526f656 Merge branch 'master' into K20D50 2013-11-28 17:24:57 +01:00
Michael Moon a249e39826 Improved baudrate calculation function. 
Uses 100% integer math, delivers more accurate results with fewer iterations in less time.

Since it seems most of the NXP chips use identical math, I have also altered the other targets in this commit.

If there are non-NXP chips which use a similar serial block, consider porting to those as well

Comparison:

         BAUD   DL MUL DIV  CPU_CLOCK
      -------  --- --- --- ----------
new: {   9600, 625,  1,  0,  96000000},	// Actual baud:    9600, error =0.00%,    1 iterations
old: {   9600, 625,  1,  0,  96000000},	// Actual baud:    9600, error =0.00%,    0 iterations

new: {  38400, 125,  4,  1,  96000000},	// Actual baud:   38400, error =0.00%,    8 iterations
old: {  38400,  81, 14, 13,  96000000},	// Actual baud:   38409, error +0.02%,  420 iterations

new: {  57600,  81,  7,  2,  96000000},	// Actual baud:   57613, error +0.02%,  120 iterations
old: {  57600,  54, 14, 13,  96000000},	// Actual baud:   57613, error +0.02%,  315 iterations

new: { 115200,  27, 14, 13,  96000000},	// Actual baud:  115226, error +0.02%,  120 iterations
old: { 115200,  27, 14, 13,  96000000},	// Actual baud:  115226, error +0.02%,  210 iterations

new: { 230400,  23, 15,  2,  96000000},	// Actual baud:  230179, error -0.10%,  120 iterations
old: { 230400,  17, 15,  8,  96000000},	// Actual baud:  230179, error -0.10%,  525 iterations

new: { 250000,  24,  1,  0,  96000000},	// Actual baud:  250000, error =0.00%,    1 iterations
old: { 250000,  24,  1,  0,  96000000},	// Actual baud:  250000, error =0.00%,    0 iterations

new: {1000000,   6,  1,  0,  96000000},	// Actual baud: 1000000, error =0.00%,    1 iterations
old: {1000000,   6,  1,  0,  96000000},	// Actual baud: 1000000, error =0.00%,    0 iterations

new: {2000000,   3,  1,  0,  96000000},	// Actual baud: 2000000, error =0.00%,    1 iterations
old: {2000000,   3,  1,  0,  96000000},	// Actual baud: 2000000, error =0.00%,    0 iterations

new: {   9600, 514, 15,  4, 100000000},	// Actual baud:    9600, error =0.00%,  110 iterations
old: {   9600, 337, 15, 14, 100000000},	// Actual baud:    9593, error -0.07%, 1365 iterations

new: {  38400,  93,  4,  3, 100000000},	// Actual baud:   38402, error +0.01%,  120 iterations
old: {  38400,  85, 12, 11, 100000000},	// Actual baud:   38363, error -0.10%,  525 iterations

new: {  57600,  62,  4,  3, 100000000},	// Actual baud:   57604, error +0.01%,  120 iterations
old: {  57600,  61,  9,  7, 100000000},	// Actual baud:   57633, error +0.06%,  840 iterations

new: { 115200,  31,  4,  3, 100000000},	// Actual baud:  115207, error +0.01%,  120 iterations
old: { 115200,  31,  4,  3, 100000000},	// Actual baud:  115207, error +0.01%,  525 iterations

new: { 230400,  19,  7,  3, 100000000},	// Actual baud:  230263, error -0.06%,  120 iterations
old: { 230400,  19,  7,  3, 100000000},	// Actual baud:  230263, error -0.06%,  735 iterations

new: { 250000,  25,  1,  0, 100000000},	// Actual baud:  250000, error =0.00%,    1 iterations
old: { 250000,  25,  1,  0, 100000000},	// Actual baud:  250000, error =0.00%,    0 iterations

new: {1000000,   5,  4,  1, 100000000},	// Actual baud: 1000000, error =0.00%,    8 iterations
old: {1000000,   5,  4,  1, 100000000},	// Actual baud: 1000000, error =0.00%,  315 iterations

new: {2000000,   2,  9,  5, 100000000},	// Actual baud: 2008929, error +0.45%,  120 iterations
old: {2000000,   2,  9,  5, 100000000},	// Actual baud: 2008929, error +0.45%,  315 iterations

new: {   9600, 625,  4,  1, 120000000},	// Actual baud:    9600, error =0.00%,    8 iterations
old: {   9600, 404, 15, 14, 120000000},	// Actual baud:    9602, error +0.02%, 1575 iterations

new: {  38400, 179, 11,  1, 120000000},	// Actual baud:   38408, error +0.02%,  120 iterations
old: {  38400, 101, 15, 14, 120000000},	// Actual baud:   38409, error +0.02%,  525 iterations

new: {  57600,  93,  5,  2, 120000000},	// Actual baud:   57604, error +0.01%,  120 iterations
old: {  57600,  68, 12, 11, 120000000},	// Actual baud:   57545, error -0.10%,  420 iterations

new: { 115200,  47, 13,  5, 120000000},	// Actual baud:  115248, error +0.04%,  120 iterations
old: { 115200,  34, 12, 11, 120000000},	// Actual baud:  115090, error -0.10%,  315 iterations

new: { 230400,  19,  7,  5, 120000000},	// Actual baud:  230263, error -0.06%,  120 iterations
old: { 230400,  17, 12, 11, 120000000},	// Actual baud:  230179, error -0.10%,  210 iterations

new: { 250000,  30,  1,  0, 120000000},	// Actual baud:  250000, error =0.00%,    1 iterations
old: { 250000,  30,  1,  0, 120000000},	// Actual baud:  250000, error =0.00%,    0 iterations

new: {1000000,   5,  2,  1, 120000000},	// Actual baud: 1000000, error =0.00%,    3 iterations
old: {1000000,   4,  8,  7, 120000000},	// Actual baud: 1000000, error =0.00%,  210 iterations

new: {2000000,   3,  4,  1, 120000000},	// Actual baud: 2000000, error =0.00%,    8 iterations
old: {2000000,   2,  8,  7, 120000000},	// Actual baud: 2000000, error =0.00%,  210 iterations
 2013-11-29 02:44:14 +11:00
tkuyucu 820e0473f6 Bogdan's startup fix added. 2013-11-28 13:21:21 +01:00
0xc0170 c5a2e6ed0e pwm, spi - pin definition, dac removed 2013-11-27 18:46:30 +01:00
bcostm 1159845529 NUCLEO_F103RB: update channels management in analogin api 2013-11-27 15:39:57 +01:00
tkuyucu 511e24ecc9 nRF51822 mbed SDK with working GPIO, RawSerial, and timer 2013-11-27 13:16:11 +01:00
0xc0170 0e99a7c9bd Analog API - pins, analog pins (arduino) correction, irq 
- ADC - pins, mux
	- analog pins - Ax
	- irq - port A - E
 2013-11-26 20:08:13 +01:00
Bogdan Marinescu 256f70fffc Merge remote-tracking branch 'origin/master' 2013-11-26 17:14:46 +02:00
Bogdan Marinescu 3c0a8b633f Provide generic pinout defines 
This commit adds generic peripheral names to various mbed enabled
boards, to make it easier to write portable code amongst various
mbed boards.
 2013-11-26 17:12:36 +02:00
bcostm dd292a7e71 NUCLEO_F103RB: Add pwmout api + change timers for ticker 2013-11-26 09:26:08 +01:00
bcostm c33dbfd63d Enable STDIO messages used by the test firmwares 2013-11-25 10:20:39 +01:00
0xc0170 3dc97b20c0 startup ARM - stack pointer, serial functional 
- stack pointer correction
	- startup for ARM - clean up
	- GCC ARM linker - RAM size correction
	- NVIC - RAM address
 2013-11-22 21:21:01 +01:00
bcostm c47bc1780a Add UseMicroLIB option for exported project 2013-11-22 11:41:07 +01:00
Bogdan Marinescu f6c9c8db5e Fixed initial SP value 2013-11-21 19:07:52 +02:00
Emilio Monti 64952d4f7e Merge pull request #114 from mazgch/master 
Avoid hardfault when CAN object is destructed.
 2013-11-21 08:40:43 -08:00
mazgch a3a16b3683 Avoid hardfault when CAN object is destructed. 
interrupts have to be disabled(can_irq_free) before we turn off(can_free) the peripheral
 2013-11-21 17:31:17 +01:00
Emilio Monti 5278dd43f2 Merge pull request #113 from mazgch/master 
fix the documentation to ethernet api to match implementation
 2013-11-21 02:32:05 -08:00
mazgch 2b7d2bb343 fix the documentation to match implementation 2013-11-21 11:24:58 +01:00
Emilio Monti 6a5335a40e Merge pull request #112 from Sissors/master 
Added sleep to LPC81x
 2013-11-21 01:58:28 -08:00
Sissors 585e05ca6a Added sleep to LPC81x 
http://mbed.org/users/mbed_official/code/mbed-src/pull-request/6
 2013-11-21 08:19:44 +01:00
hototogi 03b79b5920 support GCC_ARM for LPC4330_M4 
- Linker script is based on LPC1768
     number of NVIC is 16 (CORE) + 53 (M4 in LPC43xx) = 69,
    therefor, reserve at the top of RAM0 (address:0x10000000)
    to relocate NVIC vector table
 - startup file is based on startup_ARMCM4.S in CMSIS V3.20
     change NVIC name for cortex-M4 of LPC43xx
 - add GCC_ARM for LPC4330_M4 in python scripts
 - add some descriptions for GCC_ARM
 2013-11-20 17:03:59 +09:00
0xc0170 4e09b52a71 K20 uVision files, ld NVIC offset 
- K20 KEIL files
	- clock set to 1 (48MHz)
	- offset in GCC ld for vectors in RAM
	- us ticker - PIT timer interrupt implementation
 2013-11-19 20:06:26 +01:00
bcostm 415ac34b56 Add analogin, serial and spi support for NUCLEO_F103RB 2013-11-19 09:11:31 +01:00
0xc0170 8ca8014c00 Merge branch 'master' into K20D50 2013-11-18 20:34:45 +01:00
bcostm 70dd0d891e Add STM32F10x standard periph driver 2013-11-14 11:33:29 +01:00
bcostm 6d9b523185 Update workspace_tools files 2013-11-14 11:07:01 +01:00
bcostm beb779b3d6 Rename target 2013-11-13 09:29:29 +01:00