eaa5102358
Merge pull request #8014 from M-ichae-l/realtek-rtl8195am-lib-updates
...
realtek rtl8195am lib updates
2018-09-26 13:09:28 +02:00
f8c8c3cf68
Reduce heap size on stm32f207
2018-09-26 10:07:45 +03:00
ea6c886d22
STM32L4: Use HAL layer functions for sleep implementation
2018-09-26 08:54:13 +02:00
815683c2bd
Merge pull request #7941 from OpenNuvoton/nuvoton_fix_gpio_mode_mapping
...
Nuvoton: Fix GPIO mode mapping
2018-09-25 13:15:09 -05:00
e8d32ca0f9
STM32F1 RTC : save values in register
...
Date is managed only by SW
within CUBE functions HAL_RTC_GetDate and HAL_RTC_SetDate.
They are then replaced by functions that saved counters in HW registers.
RTC_ReadTimeCounter and RTC_WriteTimeCounter are then added to the ST API.
2018-09-25 13:45:59 +02:00
65a0a1aecd
Merge pull request #8131 from jeromecoutant/PR_F3_ADC
...
STM32F3 correct analogin_read
2018-09-25 13:24:03 +02:00
396f7e39fa
Merge pull request #8037 from mattbrown015/stm32_gpio_irq_shared_vector
...
STM32: Fix disabling of IRQs shared by multiple events
2018-09-25 13:18:02 +02:00
9215b9d264
Fixed pwmout & serial fuart
...
pwmout:
Used SystemCoreClock
Serial fuart:
SERIAL_5 & SERIAL_3 have same CTS pin (PA7), only function register is different (4 & 2).
pinmap_peripheral() will always return first match from the map.
Hence changed as, if SERIAL_5 is used, then pinmap_peripheral() should return SERIAL_5 (function register 2 to be set).
2018-09-25 13:29:12 +05:30
9474603791
Added usticker feature
2018-09-25 12:51:08 +05:30
b01cdcba5a
Modify typo of return value at mbed_get_a9_tick_irqn().
2018-09-25 14:07:59 +09:00
48038e4dcc
Change MTU2 channel number for LPTicker of GR-LYCHEE
...
MTU2(Multi function Timer pulse Unit 2) can create the low freaquency.
Currently GR-LYCHEE uses MTU2 channel 3 for LPTicker, but I noticed that a part of it is used by another function.
Thus, I changed MTU2 channel number for LPTicker to 2.
2018-09-25 13:53:49 +09:00
7ca85f9688
Merge pull request #8009 from NXPmicro/LPC1768_RTC
...
LPC1768: Enable RTC
2018-09-24 10:44:29 -05:00
7d9263d2ef
Move I2C pins definition so that A4 and A5 are defined before using them
2018-09-24 09:46:11 -05:00
d0ac092e68
Adjust stack & heap for IAR on STM32F412xG
2018-09-24 11:27:42 +03:00
b5ee0c0e27
Merge pull request #8026 from SiliconLabs/bugfix/gpcrc
...
Fix for HW CRC calculations on Silicon Labs targets
2018-09-24 10:22:13 +02:00
9d78650fcc
Merge pull request #7989 from OpenNuvoton/nuvoton_fix_m2351_stdiouart
...
M2351: Fix STDIO_UART error
2018-09-24 09:06:52 +02:00
0f879adccd
Apply @kjbracey-arm's comments
2018-09-22 20:40:32 +02:00
5eb314f65f
Merge pull request #8164 from OpenNuvoton/nuvoton_iot_m487
...
Support Nuvoton's new target NUMAKER_IOT_M487
2018-09-21 21:31:22 -05:00
caa4279244
Merge pull request #8023 from SiliconLabs/hotfix/nanostack-default-interface
...
Hotfix for PR #7778 on Silicon Labs targets
2018-09-21 12:50:43 -05:00
ab882c3416
Merge pull request #8030 from OpenNuvoton/nuvoton_fix_common_tickers_fail
...
Nuvoton: Fix Greentea test common_tickers failed
2018-09-21 14:55:28 +02:00
54afd1cd92
Merge pull request #8187 from bcostm/fix_serial_lse
...
STM32: fix wrong LSE config in serial_baud function
2018-09-21 12:54:01 +02:00
6a34251b07
Merge pull request #7925 from maciejbocianski/qspi_hal_test_refactoring
...
Qspi hal test refactoring/update
2018-09-21 09:40:10 +02:00
7d54df66b1
Merge pull request #7993 from evva-sfw/hotfix/efm32_hal_pwmout_set_period_fix
...
Fix EFM32 pwmout hal function pwmout_period
2018-09-20 13:42:04 -05:00
9f3437aaec
Merge pull request #7987 from OpenNuvoton/nuvoton_m2351_v1.3
...
M2351: Update to NuMaker-PFM-M2351 V1.3 board
2018-09-20 13:41:03 -05:00
b71f3409d7
Merge pull request #7921 from Wiznet/master
...
Fix Bug : IAR heap memory problem
2018-09-20 14:58:15 +02:00
d5ef4672b1
Support large Flash in Flash iap driver of Renesas
...
I addressed the cases Flash size is larger than 0x1000000.
2018-09-20 10:14:15 +09:00
d295eba9e5
Improve Flash iap driver of Renesas
...
I changed _page_program() func because "buf" which is an argument of data_send() for writing must be a RAM address in order to operate in SPI mode.
(ex: if it is ROM table data, writing will be failure.)
Also, I changed the period of interrupt disable/enable at _page_program() func and _sector_erase() func because lock period is too long.
2018-09-20 10:08:20 +09:00
4c31be2db4
STM32: fix wrong LSE config in serial_baud function
2018-09-19 16:46:54 +02:00
c673d5344c
NXP: Fix alignment of execute region to 8-byte boundary
...
--legacyalign, --no_legacyalign are deprecated from ARMC6 compiler, in order to
remove deprecated flags all linker files (GCC and IAR as well to have uniformity)
should strictly align to 8-byte boundary
2018-09-19 09:45:46 -05:00
525545c7b0
Freescale: Fix alignment of execute region to 8-byte boundary
...
--legacyalign, --no_legacyalign are deprecated from ARMC6 compiler, in order to
remove deprecated flags all linker files (GCC and IAR as well to have uniformity)
should strictly align to 8-byte boundary
2018-09-19 09:35:59 -05:00
c4e0fc6d11
Merge pull request #7920 from li-ho/aducm3029_sys_return_code
...
Resolve duplicate ADuCM3029 system return code
2018-09-19 14:19:25 +02:00
81d0948c09
Merge pull request #8025 from deepikabhavnani/flag_update
...
Align to CMSIS defines for Non-Secure
2018-09-19 14:18:41 +02:00
9a0fc98bdc
Hotfix for PR #7778
...
TB_SENSE_12 would have been left behind by the changes in #7778 . This commit implements the changes in mbed to allow targets to provide a default network interface for Silicon Labs targets.
2018-09-19 12:30:21 +02:00
6d5cb6c69b
Merge pull request #8136 from fkjagodzinski/fix-stm-us_ticker_after_deepsleep
...
STM: Fix us_ticker timestamp after deep sleep
2018-09-19 12:15:10 +02:00
a0d7d4eef7
nrf: allow target.mbed_ram_start and target.mbed_ram_size to override settings in linker
2018-09-19 16:13:36 +10:00
cd618e640b
Implemented us_ticker free()
2018-09-19 10:41:07 +05:30
7504050bb3
Added usticker feature
...
To enable the feature US_TICKER, file is newly implemented with Timer B, which has proper clock prescale and free running after match interrupt.
Old us_ticker driver file (Timer A) is producing up to 100us tolerance, which causes to fail US_TICKER feature.
Hence, changed the peripheral ticker A to B.
2018-09-19 10:37:23 +05:30
9d2fcdb773
[M487] Create MCU_M480 for inheritance by M487 targets
...
In targets.json, create MCU_M480 for inheritance by NUMAKER_PFM_M487/NUMAKER_IOT_M487.
2018-09-19 09:02:42 +08:00
5391a7b6fe
Merge pull request #7700 from cesarvandevelde/bluepill-target-fix
...
STM32: Correct device_has_add flags for bluepill_f103c8 target, fixes #7654
2018-09-18 11:30:35 -05:00
f510efff38
DISCO_L496AG : enable ADC
...
See User Manual, VREF+ is not connected by default
NB: Use 2.5V as reference (instead of 3.3V)
for internal channels calculation
2018-09-18 16:11:13 +02:00
7bcb066917
Merge pull request #7856 from fredlee12001/master
...
Realtek: fix gpio is connected
2018-09-18 12:28:14 +02:00
8604f80a8e
Merge pull request #8010 from NXPmicro/NXP_Fix_UART_Parity_Sel
...
NXP: Update serial driver's parity handling
2018-09-17 14:46:58 +02:00
b97ac0c353
Merge pull request #7787 from jeromecoutant/PR_MSI_LSE
...
STM32L4 : code cleanup in MSI SetSysClock
2018-09-17 14:22:29 +02:00
6821556b47
STM: Fix us_ticker timestamp after deep sleep
...
Use the `mbed_sdk_inited` flag to correct the `HAL_GetTick()` behavior
after waking up from deep sleep mode. `ticker_read_us()` must not be
used to read us_ticker timestamp after waking up until the us_ticker
context is restored. More detailed description in issue #8117 .
Fixes #8117
2018-09-14 15:44:40 +02:00
f41c72ded8
STM32L1 ADC update for internal channels
2018-09-14 13:23:50 +02:00
52776a1e7b
SM32F3 correct analogin_read
2018-09-14 11:41:12 +02:00
e5000abd93
Merge pull request #1 from thesupershan/lpc1768-us-ticker
...
choose which lpc1768 timer to use for us_ticker.c
2018-09-13 11:56:58 -07:00
2a70879ffa
STM32L496 : wrong ADC init
2018-09-13 16:31:49 +02:00
190803ae6a
choose which lpc1768 timer to use for us_ticker.c
2018-09-13 05:57:13 -07:00
ab50681c33
Rename device option STCLK_OFF_DURING_SLEEP
...
Rename STCLK_OFF_DURING_SLEEP to SYSTICK_CLK_OFF_DURING_SLEEP to avoid
confusion with the STmicroelectronics.
2018-09-12 14:40:25 -05:00
12522210a2
STM32L0 internal channel ADC_TEMP
...
Temperature measurement was not stable
2018-09-12 17:21:36 +02:00
5bbe62889a
STM32L072 : ADC internal channels correction
2018-09-12 17:21:30 +02:00
8d9e2e5d0a
Merge pull request #7909 from KariHaapalehto/f411re_iar
...
Adjust STMF411xE IAR linker file to mbed-os memory needs.
2018-09-12 09:20:15 -05:00
3661dc7e71
MIMXRT1050_EVK: Fix the PWM Hal driver
...
1. Add Pin defines for missing PWM pins
2. Update the hal to account for the number of PWM instances
3. Fix the register reload policy
4. Configure the XBAR to put the PWM fault inputs in inactive state
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2018-09-12 08:52:39 -05:00
827c8bd486
STM32 RTC : remove not necessary macro
...
__HAL_RCC_RTC_CLKPRESCALER is called in __HAL_RCC_RTC_CONFIG
2018-09-11 14:14:19 +02:00
5c46bec4d4
STM32 RTC with LSI : stop reset registers during init
2018-09-11 14:13:43 +02:00
0fecc56e84
STM32 RTC : Start LSI clock asap
2018-09-11 14:04:03 +02:00
9e175db443
NRF52: Ensure that we configure hardware after flow control changes
...
Call the routines to program the hardware to reflect the updates made to
flow control so that the object and hardware are in synch.
2018-09-10 10:47:28 -05:00
ff80e298d2
Align to CMSIS defines for Non-secure
...
CMSIS updated the __DOMAIN_NS define to DOMAIN_NS. Update the define
in existing code for non-secure part.
2018-09-10 09:25:27 -05:00
6ac163088a
Support Nuvoton's NuMaker-IoT-M487 board
2018-09-10 11:32:54 +08:00
a65e3d42e5
[M2351] Update secure library/executable
...
1. Remove hal_sleep/hal_deepsleep from secure library
2. Add CLK_Idle_S/CLK_PowerDown_S
2018-09-10 11:09:40 +08:00
0550de72f5
[M2351] Fix hal_deepsleep with serial_can_deep_sleep
...
Add secure functions CLK_PowerDown_S/CLK_Idle_S
2018-09-10 10:55:45 +08:00
beb04a82dc
[Nuvoton] Fix serial corruption due to deep sleep
...
Prevent deep sleep when there is still any character being transmitted on the UART.
This allows tickless to be safely enabled.
2018-09-10 10:55:44 +08:00
310b12a235
[Nuvoton] Fix HAL sleep test failure with lp_ticker
...
Replace wait_us with nu_busy_wait_us in lp_ticker since wait_us is not allowed in sleep test
which would suspend us ticker layer on which wait_us relies. nu_busy_wait_us is implemented
by calling us ticker HAL API directly rather than relying on us ticker layer.
2018-09-10 10:55:44 +08:00
26c0444cc3
[Nuvoton] Add nu_delay_cycle_x4
...
nu_delay_cycle_x4 is a replacement for wait_us when us ticker is not available.
2018-09-10 10:55:43 +08:00
88b9f20ec4
[Nuvoton] Add nu_busy_wait_us
...
nu_busy_wait_us is a replacement for wait_us when intermediary us ticker layer is disabled.
2018-09-10 10:55:43 +08:00
2b632b9eb0
[Nuvoton] Move nu_countdown_init/expired/free implementations to nu_timer.c from nu_timer.h
2018-09-10 10:55:42 +08:00
ab7b93ca58
[Nuvoton] Synchronize us_ticker to lp_ticker
...
This is to make implementations of us_ticker/lp_ticker consistent.
2018-09-10 10:50:22 +08:00
6639a92bcd
[Nuvoton] Fix lp_ticker_free cannot pass speed test
2018-09-10 10:50:22 +08:00
9ee83f575a
[Nuvoton] Fix spurious us_ticker/lp_ticker interrupts
...
If us_ticker/lp_ticker is scheduled and then the interrupt is disabled, the originally scheduled
interrupt may still become pending. If this occurs, then an interrupt will fire twice on the next
call to us_ticker_set_interrupt/lp_ticker_set_interrupt - once immediately and then a second time
at the appropriate time.
This patch prevents the first interrupt by clearing interrupts in
us_ticker_set_interrupt/lp_ticker_set_interrupt before calling NVIC_EnableIRQ.
2018-09-10 10:50:21 +08:00
28c63ec0f3
NRF52: serial_api: Use polling for putc
...
There are scenarios where putc is called within a critical section, e.g
to log ASSERTs in early initialization code. The interrupts being
disabled here prevents the handlers for the UARTE from executing.
This breaks the tx_in_progress flag based approach. The tx_in_progress
never gets reset. Poll on the TXDRDY instead.
It can be recreated with a simple program as shown here:
*************** Current Behavior ****************
++ MbedOS Error Info ++
Error Status: 0x80FF0100 Code: 256 Module: 255
Error Message: F
************** With Fix *************************
++ MbedOS Error Info ++
Error Status: 0x80FF0100 Code: 256 Module: 255
Error Message: Fatal Run-time error
Location: 0x2C0A9
Error Value: 0x0
Current Thread: Id: 0x20005520 Entry: 0x30EBF StackSize: 0x1000 StackMem: 0x20004520 SP: 0x20005490
For more info, visit: https://armmbed.github.io/mbedos-error/?error=0x80FF0100
-- MbedOS Error Info --
nrf failure at .\main.cpp:22
***************************************************
2018-09-09 16:33:30 -05:00
d311a96061
Merge pull request #7950 from c1728p9/l4_malloc_fix
...
Fix memory allocation on STM32L4 devices
2018-09-07 22:50:05 -05:00
76827c3704
Merge pull request #7971 from JammuKekkonen/fix_softdevice_memory_reservation_for_nrf52dk
...
Fix memory reservation for Softdevice in NRF52_DK
2018-09-07 11:46:58 -05:00
66cce67d38
Update the K64F to use boot stack size config
...
Update the K64F linker scripts to make use of the newly added stack
size target config.
2018-09-07 17:00:48 +01:00
1ead033423
Add framework for configuring boot stack size
...
Add the target config option "boot-stack-size" which is passed to the
linker as the define "MBED_BOOT_STACK_SIZE" so the linker can
adjust the stack accordingly. On mbed 2 the boot stack becomes the
main stack after boot. On mbed 5 the boot stack becomes the
ISR stack after boot. Because of these different uses the stack size
for mbed 2 is set to 4K by default while on mbed 5 it is set to 1k.
Additionally, the NRF5X family requires a larger interrupt stack size
due to the softdevice so the size is increased to 2k on mbed 5 builds.
2018-09-07 16:31:49 +01:00
792cec773e
STM32: Disabling of IRQs shared by multiple events
...
Discern if an IRQ is being shared by multiple events and only disable the IRQ if no events are using it.
2018-09-07 14:48:02 +01:00
e30435bd08
Merge pull request #7990 from maciejbocianski/qspi_small_fixes
...
DISCO_L475VG_IOT01A remove old QSPI pins
2018-09-07 10:47:19 +02:00
7711d4c93b
Word-sized input to GPCRC is only valid for 32-bit polynomial
2018-09-07 00:19:32 +02:00
ff1a0ede1f
Merge pull request #7995 from yossi2le/revert-pinnames-files
...
Reverting PinNames.h after PR #7774 changes
2018-09-06 13:20:43 -05:00
e084865e8e
Fix comparison warning on STM32L4 devices
...
Cast the pointer used in l4_retarget to uint32_t before comparing it
to fix the warning:
"comparison between pointer and integer"
2018-09-06 16:07:03 +01:00
80c9814fd0
Revert file permissions
2018-09-06 13:57:06 +02:00
b2d8b54f7d
Revert file permissions
2018-09-06 12:56:13 +02:00
86f966fa00
Adjust STMF411xE IAR linker file to mbed-os memory needs.
...
Stack size decreased and heap size increased.
2018-09-06 13:34:12 +03:00
ff20fc3341
"gpio_api.c" update
...
1, "gpio_api.c" update. fix issues for compiling the mbed-cloud-client-example
2018-09-06 14:40:06 +08:00
b06553fa25
rtl8195am lib updates
...
1, rtl8195am lib updates. Preparation for the low power features.
2018-09-06 14:28:34 +08:00
201ec14d45
Merge pull request #7779 from MateuszMaz/fix_for_NRF52_pwm_issues
...
Fix for nrf52 pwm issues
2018-09-05 20:05:35 -05:00
16ff8e7369
NXP: Update serial driver's parity handling
...
This is a fix for issue 6305. This fix set the default
parity value to NONE.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2018-09-05 13:30:36 -05:00
e09f1e2149
LPC1768: Enable RTC
...
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2018-09-05 12:21:03 -05:00
dc45990a58
Merge pull request #7904 from NXPmicro/MIMXRT1050_Fix_Spi
...
MIMXRT1050_EVK: Update SPI HAL driver
2018-09-05 09:18:58 -05:00
a8fca70fa9
MIMXRT1050_EVK: Add RTC support
...
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2018-09-05 08:29:37 -05:00
acfda5895e
Changes in PR #7774 of PinNames.h should be reverted. This commit reverts those files excpet for K82F and K64F which are left as an example
2018-09-05 14:13:05 +03:00
dd2e93fbd3
Fix EFM32 pwmout hal function pwmout_period
...
In pwmout_period() is a check for changed values, which is not working because of a wrongly used bitmask. This is fixed now.
2018-09-05 11:17:28 +02:00
050604f1b8
DISCO_L475VG_IOT01A remove old QSPI pins
2018-09-05 09:58:20 +02:00
2da75c860c
[M2351] Fix STDIO_UART error
2018-09-05 11:52:40 +08:00
958c7fe564
[M2351] Update to NuMaker-PFM-M2351 V1.3 board
...
1. Update UNO pin A4/A5
2. Update UNO pin D2/D3
2018-09-04 15:19:33 +08:00
44925d8527
Merge pull request #7579 from u-blox/ublox_odin_driver_os_5_v3.0.0_rc1
...
Updated ODIN drivers to v3.0.0 RC1
2018-09-03 09:25:32 +02:00
4c105fc2d7
SDT64B is not Arduino FF. It does not define Arduino pins.
2018-09-01 12:40:38 -05:00
3ab9c41983
WISE-1510 is not Arduino form factor
2018-09-01 12:37:46 -05:00
710d1bb00a
Enable default Mesh interface on KW24D
...
This device still requires MCR20A driver to be in build tree
and this patch https://github.com/ARMmbed/mcr20a-rf-driver/pull/18
2018-09-01 12:36:27 -05:00
993c897b55
Merge pull request #7774 from yossi2le/sd-spif-to-mbed-os
...
Add default block device support (SD, SPIF and FLASHIAP)
2018-09-01 11:15:13 -05:00
e2d003a420
Fix memory allocation on STM32L4 devices
...
Depending on initial size allocated on STM32L4 devices with
TWO_RAM_REGIONS set a crash may occur. This is because there is a
mismatch between the size newlib is expecting and the size actually
returned by _sbrk. This is because the STM32L4 implementation of _sbrk
is performing alignment internally.
This patch fixes this problem by removing the code in __wrap__sbrk
which performs the alignment.
2018-08-31 18:31:52 -05:00
00b7700be2
Merge pull request #7875 from c1728p9/feature_CMSIS_5_0b521765
...
Update CMSIS to 5.4.0
2018-08-31 11:31:37 -05:00
f91bba9803
Updated pinmap to fix CAN and enable UART hardware flow control
2018-08-31 17:17:29 +02:00
c10907288d
Corrected device_has_add flags for bluepill_f103c8 target
2018-08-31 17:17:29 +02:00
1a9999708e
Fix memory reservation for Softdevice in NRF52_DK
2018-08-31 14:13:55 +03:00
3a64383de5
fix qspi address sending for nrf52
...
fix address sending in qspi_command_transfer
now address is send MSB first
2018-08-31 10:48:37 +02:00
b934632653
Access Point API
2018-08-31 11:33:30 +05:00
55328ebdd5
[Nuvoton] Fix pin mode mapping between input pull mode/direction and I/O mode
...
1. Modify PinMode enum to fully support GPIO I/O modes.
2. Translate input pull mode/direction to I/O mode, where H/W doesn't support
separate configuration for input pull mode/direction.
3. Allow for configuring I/O mode in addition to input pull mode.
2018-08-31 10:06:30 +08:00
06a98e7dcf
Merge pull request #7778 from SeppoTakalo/provide_default_mesh
...
Fix MeshInterface::get_default_instance()
2018-08-30 16:11:00 -05:00
a93ff7c931
Added PC2 pin to ADC pin map
2018-08-30 15:19:50 +05:00
4989650854
Don't provide default interface on NCS36510, won't fit testcases on IAR
2018-08-30 11:04:25 +03:00
56117a86c8
Merge pull request #7871 from juhoeskeli/NUCLEO_F207ZG_LINKER_MCC
...
Updated linker files (GCC_ARM, ARM, IAR) for NUCLEO_F207ZG and enabled bootloader functionality
2018-08-30 09:49:17 +02:00
251ab0173d
Stack size change to 1K in IAR Linker Script.
2018-08-30 08:41:12 +09:00
ed8e170d15
Moving SD, SPIF and FLASHIAP into mbedos and refactoring features storage directory structure.
2018-08-29 12:01:11 +03:00
3f4d30de56
Fix Bug : IAR heap memory problem
2018-08-29 14:20:30 +09:00
b57f90241e
Apply consistent system return code to adi_system_EnableRetention()
2018-08-29 13:42:16 +10:00
ae492d9c4a
Add consistent ADuCM3029 System return codes and remove duplicate codes
2018-08-29 13:38:30 +10:00
16d23702bf
Merge pull request #7873 from 0xc0170/fix_realtek_ipv6
...
realtek: fix #7829 - remove dhcps files
2018-08-28 14:37:46 +02:00
9836b9bd6a
Provide default mesh driver on NCS36510
2018-08-28 11:02:58 +03:00
d5b374b327
Correct comment about stack size in IAR linker file
2018-08-28 08:44:08 +03:00
5cc06238ea
Enable bootloader for NUCLEO_F207ZG
2018-08-28 08:44:08 +03:00
22137b45dd
Update NUCLEO_F207ZG linker files
2018-08-28 08:44:08 +03:00
2bc140e978
MIMXRT1050_EVK: Update SPI HAL driver
...
Use a different SDK API to write to the SPI Bus
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2018-08-27 14:20:49 -05:00
91354184dc
Merge pull request #7825 from SiliconLabs/siliconlabs-qspi
...
Silicon Labs QSPI HAL implementation
2018-08-27 13:51:38 -05:00
90689c3191
fixed pin names of I2C pins
2018-08-27 07:29:07 -05:00
a24cecfc94
Merge pull request #7805 from jamesbeyond/fm_test
...
Skip Greentea tests for Mbed OS code coverage on Fast Models
2018-08-27 10:39:43 +02:00
ce28c91405
Merge pull request #7534 from bentcooke/mote_L152_en_os5
...
enable MOTE_L152 for OS5
2018-08-27 10:27:36 +02:00
55c6dade3d
Apply changes corresponding to #7817
...
QSPI standard pin names were changed after the QSPI feature PR.
2018-08-27 10:10:18 +02:00
e0d033bdd1
Allow unaligned input/output for QSPI
...
The code is written such that access to the data input/output happens word-by-word, and that means unaligned access is fine (though with a performance loss) on Cortex-M3/M4 devices.
2018-08-27 10:03:08 +02:00
845a5beb30
Initial commit of Silicon Labs QSPI HAL implementation
...
* For EFM32GG11, since that is the only Silicon Labs target with QSPI per today
* Verified working using the on-board flash and tests-mbed_hal-qspi
2018-08-27 10:03:08 +02:00
22ebf69dea
Revert "EFM32: Use SECURE_ACCESS to access the ROM table"
...
This reverts commit 1b0922e97b
2018-08-25 20:40:35 -05:00
4ff5ea40dd
Revert uVisor changes for K64F
...
Revert the changes made in the commit:
1c2a7d8842
2018-08-25 20:40:31 -05:00
2f8e679183
Merge pull request #7592 from orenc17/remove_uvisor
...
Remove uVisor from mbed-os
2018-08-25 19:52:24 -05:00
7531b31c01
Merge pull request #7751 from mikaleppanen/realtek_emac_interf
...
Realtek RTL8195A wifi interface to inherit EMAC interface
2018-08-24 19:30:39 -05:00
31a6fb49bd
Merge pull request #7817 from maciejbocianski/qspi_pinnames
...
standardise QSPI pin names
2018-08-24 21:12:25 +02:00
2d330533a4
Merge pull request #7652 from andrewleech/nrf5x_config_lfclk
...
NRF5x: Fix config of LFCLK source / settings.
2018-08-24 13:05:24 +02:00
5195c820e6
standardise QSPI pin names
2018-08-24 12:09:51 +02:00
812c6d5c88
Merge pull request #7783 from maciejbocianski/feature-qspi_merging
...
merge QSPI feature branch
2018-08-24 10:50:18 +02:00
ab029b5f65
realtek: fix #7829 - remove dhcps files
2018-08-23 16:48:00 +01:00
cb8d09a88a
Merge pull request #7843 from codeauroraforum/MXRT_Fix_I2C_Byte_Transfer
...
MIMXRT1050: Fix I2C Byte transfer functions
2018-08-23 10:05:08 -05:00
84eda278a5
Fix link issue for mbed-cloud-client-example with ARM toolchain.
2018-08-23 17:25:07 +08:00
32647e6888
enable MOTE_L152 for OS5
2018-08-22 11:49:25 -05:00
19a571c911
Removing default flow control for BL652
2018-08-22 16:50:22 +01:00
787317b7eb
Remove uVisor from mbed-os
2018-08-22 16:36:59 +03:00
3bf9df7b56
target DISCO_F413ZH: add QSPI flash pin names
2018-08-22 15:02:13 +02:00
6095ccf1b4
Add reset internal state before call to HAL_QspiInit function
2018-08-22 15:02:11 +02:00
7dda4e4fc6
Implement qspi_free function
2018-08-22 15:02:10 +02:00
5c26e15cd3
Fix support of max flash size
2018-08-22 15:02:09 +02:00
43258a8ff4
STM32 : add all QSPI pins in available targets
2018-08-22 15:02:08 +02:00
1534426b7e
nrf52x: fix QSPI enable flag
...
QSPI feature was mistakenly moved form target nrf52840 to nrf52832
while rebasing. This change fixes it
2018-08-22 15:02:07 +02:00
8b36d6b39a
NRF5: fix qspi R/W opcodes mapping
2018-08-22 15:02:05 +02:00
c2cc559aa7
NRF5: fix qspi custom command sending
2018-08-22 15:02:05 +02:00
67798d6eb2
STM: add qspi pin names for DISCO_L475VG_IOT01A
2018-08-22 15:02:04 +02:00
42935bbdc0
STM qspi: temporary fix for qspi_free return value
2018-08-22 15:02:03 +02:00
1f4cc95f25
fix qspi command transfer for NORDIC
...
Add address unpacking support.
Only used in erase commands
2018-08-22 15:02:03 +02:00
2f06423a89
Add support for QSPI on DISCO_L476VG
2018-08-22 15:02:01 +02:00
c00e49fcf2
Enable QSPI for DISCO_F746NG
2018-08-22 15:01:54 +02:00
293d1bda42
Add MBED_WEAK for pins
2018-08-22 15:00:22 +02:00
9b4b28fc3f
Support maximum flash size : 4Gbytes
2018-08-22 15:00:22 +02:00
50b8225948
Enable QSPI feature for DISCO_F413ZH platform
2018-08-22 15:00:21 +02:00
c57a47e4b5
Change default FlashSize to 64Mbit = 8Mbytes = 0x800000
2018-08-22 15:00:20 +02:00
8e08740237
Fix Instruction with no data command
...
Adding QSPI_DATA_NONE activates the transfer
of the command inside HAL_QSPI_COMMAND function
2018-08-22 15:00:19 +02:00
05899e9c70
Fix Address.Size and AlternateByes.Size by shifting them
...
The ST HAL code is waiting for the correctly shifted vlue
(for a direct write into the HW register)
2018-08-22 15:00:18 +02:00
d282c81e86
QSPI: add STM32L4 support
...
Disco IoT board support for QSPI. As it does not have dual flash support in QSPI,
we need to fix qspi hal implementation.
2018-08-22 15:00:17 +02:00
ae7bb17eaf
QSPI: add flash pins for nrf52480_dk board
2018-08-22 15:00:16 +02:00
0f7fd757a4
QSPI: add flash pins for F469 disco board
2018-08-22 15:00:16 +02:00
c778c90184
QSPI STM32: fix default fifo and cycle
...
As example for DISCO F469NI defines them
2018-08-22 15:00:15 +02:00
8783956a77
QSPI STM32: fix prepare comman - alt/address
2018-08-22 15:00:14 +02:00
fff20729be
QSPI STM32: fix command transfer
...
use write/read from STM32 driver
2018-08-22 15:00:14 +02:00
5038b38622
QSPI STM32: fix pin merging
...
hw name as input
2018-08-22 15:00:13 +02:00
16ca742d87
QSPI STM32: fix disabled format phase
2018-08-22 15:00:12 +02:00
2766672f64
QSPI STM32: add QSPI_x support to pinnames
2018-08-22 15:00:12 +02:00
660d250e0d
QSPI STM32: init returns error if failed to init
2018-08-22 15:00:11 +02:00
551f044e77
QSPI STM32: add qspi_command_transfer implementation
2018-08-22 15:00:11 +02:00
6e5b889e52
QSPI STM32: remove polling from write/read
...
This will be part of custom instruction transfer, the flow will be:
1. write data
2. wait for transfer to complete (poll status register from the memory device)
2018-08-22 15:00:10 +02:00
8da072d8af
QSPI STM32: set default command values to none
2018-08-22 15:00:10 +02:00
11ae100d80
QSPI STM32: fix return value in frequency
2018-08-22 15:00:09 +02:00
5e75b39b78
QSPI STM32: fix ssel af selection
2018-08-22 15:00:09 +02:00
7da0ac2516
QSPI: add STM32 implementation
2018-08-22 15:00:08 +02:00
cb4308ad64
Remove changes to Nordic SDK and modify HAL to track qspi init
2018-08-22 15:00:03 +02:00
10a6fd6549
Add support for 1_1_2 and 1_2_2 modes in HAL
2018-08-22 15:00:01 +02:00
16d121c5d2
Review fixes and doxygen changes
2018-08-22 15:00:00 +02:00
009cc8b474
Enabling QSPI headers in Nordic HAL implementation and fix for UART STDIO definitions
2018-08-22 14:59:59 +02:00
2df58e2d25
Modify QSPI HAL API to include an API for command-transfer operations
2018-08-22 14:59:59 +02:00
d1b51b6328
QSPI: initial HAL nrf52840 version
...
This commit adds QSPI HAL implementation for nrf52840 MCU targets
2018-08-22 14:59:58 +02:00
d28d13cc9b
Merge pull request #7790 from jeromecoutant/PR_LPTICKER_RTC
...
STM32 LPTICKER : RTC wake up timer is reset before setting a new one
2018-08-22 14:04:58 +02:00
629357270e
NRF5x: Fix config of LFCLK source / settings.
2018-08-22 13:55:28 +10:00
f71004cf89
MIMXRT1050: Fix I2C Byte transfer functions
...
1. Added a flag to issue START command
2. Do not send START command inside i2c_start function as
the LPI2C hardware will issue a STOP on reception
of a NACK
3. Remove the i2c_address global variable, this is not
required
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2018-08-21 10:25:00 -05:00
17a525c487
Merge pull request #7619 from u-blox/cellular_ublox_udp_tcp_imp
...
UBLOX cellular api's for UDP and TCP
2018-08-21 10:12:47 -05:00
4b5c6c8953
Merge pull request #7823 from codeauroraforum/MIMXRT1050_Fix_I2C
...
MIMXRT1050_EVK: Update the I2C driver
2018-08-21 09:54:36 -05:00
a8f390ebec
Merge pull request #7798 from simosillankorva/NUCLEO_F303RE_bootloader_support
...
Add bootloader support for target NUCLEO_F303RE
2018-08-21 09:50:26 -05:00
c167275c6d
Merge pull request #7775 from jeromecoutant/PR_ASSERT
...
STM32 wrong MBED_ASSERT use
2018-08-21 09:44:23 -05:00
c10ad7f544
Merge pull request #7212 from davidsaada/david_flashiap_test_small_flash
...
FlashIAP & NVStore tests: Skip test if overwriting code in flash
2018-08-21 09:41:51 -05:00
795248bcaf
Restore lp_ticker_free to previous implementation when running with uvisor
...
This is a temporary patch until uvisor is removed
2018-08-20 13:20:45 +03:00
64e5eb01d2
MIMXRT1050_EVK: Update the I2C driver
...
1. Remove the repeated_start flag and code as this is not needed
for the LPI2C module
2. Enable the SION bit on the I2C pins
3. Enable 22K Pullup option of the I2C pins
4. Update the 0 byte write implementation to ensure the START
command gets flushed out of the FIFO
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2018-08-17 15:03:35 -05:00
485fe79a71
add __ARM_FM macro in targets.json
2018-08-17 18:01:21 +01:00
f612ea0b47
replace hard-coded vector size with macro in linker scripts
2018-08-17 17:59:17 +01:00
f15dbf2c3d
Merge pull request #7706 from jamesbeyond/fm_mem
...
Refactoring memory regions definitions for Fast Models MPS2 targets
2018-08-17 11:10:36 -05:00
8e25d2d905
Merge pull request #7669 from SigmaDeltaTechnologiesInc/master
...
SDT64, 8195, 32620, 32625, 51822, 52832B added to targets
2018-08-17 11:10:12 -05:00
62a70f461b
Fix TMPM64B IAR linker file
...
Remove unnecessary manual inclusion of tmpm64b_fc object file in linker script
2018-08-16 21:59:44 +03:00
c6acfd389b
Change NUCLEO_F303RE IAR Linker script heap size
...
* Change the heap size value to be the stated 1/4 of the RAM.
2018-08-16 01:58:43 -07:00
515e35efe9
fixed errors related to MAX32625_NO_BOOT
2018-08-16 13:53:47 +09:00
f50e7e9620
SDT8195B removed
2018-08-16 11:05:19 +09:00
134ff0a3a9
Merge pull request #7777 from jeromecoutant/PR_SUNDAY
...
STM32F1 RTC : wrong Sunday value
2018-08-15 16:15:48 -05:00
c4e814d9cc
Merge pull request #7716 from MateuszMaz/#issue5119_pwm_fix
...
Fix issue #5119 , changed pwmout_api.
2018-08-15 16:12:41 -05:00
b01d0abf4c
Merge pull request #7693 from kapi90/cm3ds_gpio_api_fix
...
Fix for CM3DS GPIO api
2018-08-15 15:53:42 -05:00
b4e88392dd
Merge pull request #7645 from naveenkaje/fix_nrf
...
nrf_drv_twi: remove redundant nrf_drv_disable call in nrf_drv_twi_uninit
2018-08-15 15:51:21 -05:00
83608d59ac
Add bootloader support for target NUCLEO_F303RE
2018-08-15 07:30:05 -07:00
c8d628baf6
STM32 : update LPTICKER_DELAY_TICKS value
...
- decreased to 1 for low freq targets
- removed for high freq targets
- not changed for targets with LPTIM
2018-08-14 16:54:39 +02:00
a0fa0b6a5a
STM32 RTC : remove compilation warning with unused variable
2018-08-14 14:00:25 +02:00
7b77e50082
STM32 LPTICKER : RTC wake up timer is reset before settign a new one
2018-08-14 13:59:48 +02:00
b5c258e398
STM32L4 : code cleanup in MSI SetSysClock
2018-08-14 09:20:52 +02:00
2aa67b8c16
Fix for issue #7707 PwmOut inverted
...
since obj->sequence = &obj->pulse
and most significant bit of sequence denotes the polarity, we should set it.
2018-08-13 17:39:27 +02:00
e1d50193b0
Fix for issue #7743 NRF52 Cannot initialize PWM
...
Deleted lines that caused the problem. Note that, in nrf_drv_pwm_init there are lines that check if pwm instance is already running, so we don't even need to check it in nordic_pwm_init.
nrf_drv_uninit should be used in nordic_pwm_restart.
2018-08-13 17:29:49 +02:00
e455d74f3d
STM32 : Sunday value is different for STM32F1
2018-08-13 17:04:56 +02:00
0e68570d49
Merge pull request #7686 from KariHaapalehto/1530_led
...
Correct MTB_ADV_WISE_1530 led configuration
2018-08-13 09:18:27 -05:00
063cad5992
STM32L4 assert in SetSysClock replaced
2018-08-13 16:01:49 +02:00
ac06d5574b
STM32L1 assert in SetSysClock replaced
2018-08-13 15:56:20 +02:00
220d033468
STM32L0 assert in SetSysClock replaced
2018-08-13 15:55:51 +02:00
749343f695
STM32F7 assert in SetSysClock replaced
2018-08-13 15:55:17 +02:00
b47c1ef6c4
STM32F4 assert in SetSysClock replaced
2018-08-13 15:54:51 +02:00
974141ce48
STM32F3 assert in SetSysClock replaced
2018-08-13 15:51:35 +02:00
bf7dc5f8b8
STM32F2 assert in SetSysClock replaced
2018-08-13 15:48:26 +02:00
dc02be705a
STM32F1 assert in SetSysClock replaced
2018-08-13 15:04:02 +02:00
76356039d9
STM32F0 assert in SetSysClock replaced
2018-08-13 14:53:33 +02:00
97fef1160c
STM32L4: Fix sleep implementation
...
Correctly detect and handle the low power run mode when entering and exiting sleep mode.
The generic `hal_sleep` implementation tries to exit LPR mode always, resulting in a spin-loop during a critical section (disabled IRQ).
The new approach returns from LPR to Run mode if enabled (LPR bit set), enters sleep, and resets to the original state on wakeup (WFI).
2018-08-13 09:21:31 +02:00
4385361d38
Changed Realtek RTL8195A wifi interface to inherit EMAC interface
...
This allows connection status callback build into EMAC interface class
to work with Realtek RTL8195A wifi.
2018-08-10 10:07:16 +03:00
54f40a0f4f
Merge pull request #7523 from maximmbed/max32625pico-bl-updates
...
Add bootloader configuration parameters for MAX32625PICO
2018-08-09 19:06:30 -05:00
7bcbb78661
Merge pull request #7729 from davidsaada/david_fix_arm_linker_script_renesas_realtek
...
Rename text region in ARM linker file for Renesas & Realtek boards
2018-08-09 15:57:29 -05:00
c52d49c67b
Merge pull request #7731 from mirelachirica/wise_1570_clock_source_back_to_HSE_XTAL
...
Cellular: WISE_1570's system clock back to HSE_XTAL
2018-08-09 10:18:53 -05:00
e85acac175
Merge pull request #7717 from LMESTM/fix_checkfifo
...
STM32: check for UART ongoing transfers before entering deepsleep
2018-08-09 10:17:00 -05:00
b5eb59091a
fix formatting
2018-08-08 16:53:21 +02:00
2d53282c38
Cellular: WISE_1570's system clock back to HSE_XTAL
2018-08-08 16:24:33 +03:00
d360da9d1d
Merge pull request #7419 from codeauroraforum/Add_MXRT_Sleep_Support
...
MIMXRT1050EVK: Fix Sleep support
2018-08-08 07:36:24 -05:00
84412d6493
Rename text region in ARM linker file for Renesas & Realtek boards
2018-08-08 14:56:58 +03:00
0eb7e7dd89
Merge pull request #7703 from li-ho/adi_tmr_api
...
Resolve us_ticker.c api discrepancy between EV_COG_AD4050LZ and EV_COG_AD3029LZ
2018-08-07 09:16:55 -05:00
54bc12f91c
Merge pull request #7643 from bcostm/fix_uart_remove_force_reset
...
STM32: remove uart force_reset at init
2018-08-07 09:14:20 -05:00
e12d98e1c0
Use HAL coding style for function naming
2018-08-07 13:42:46 +02:00
402f3f1c3f
STM32: check for UART ongoing transfers before entering deepsleep
...
As suggested by Russ Butler in mbed-os issue #7328 , and until there is an
implementation of mbed-os issue #4408 , we are implementing a workaround
at HAL level to check if there is any ongoing serial transfer (which happens
if HW FIFO is not yet empty).
In case a transfer is ongoing, we're not entering deep sleep and
return immediately.
2018-08-07 11:30:53 +02:00
b5d23c3f26
Fix issue #5119 , changed pwmout_api.
...
The period of pwm we could get was limited to 69.9 ms, because prescaler value was set once only during initialization. base->mod is a 16 bit register, to get longer period we have to slow down the clk.
2018-08-07 09:36:32 +02:00
9cf2b76db9
MXRT1050_EVK: Enable Sleep function and add SKIP_SYSCLK_INIT macro
...
SKIP_SYSCLK_INIT prevents reinitializing the SYS_CLK PLL used by SDRAM.
This PLL is setup during bootup by the ROM code.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2018-08-06 11:55:33 -05:00
74c96b6359
MXRT1050_EVK: Sleep: add pre/post processing steps
...
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2018-08-06 11:55:32 -05:00
e18e0f12f4
MXRT1050_EVK: Ensure certain low power function are linked to internal memory
...
Low power functions related to powering off FLEXSPI and SDRAM needs
to be copied to internal memory
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2018-08-06 11:55:13 -05:00
a1d8298057
MIMXRT1050_EVK: Add Low Power Manager files
...
This is needed to support different Low-Power modes available
in MXRT1050
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2018-08-06 10:36:16 -05:00
04fc7aa36f
Generic pin names added
2018-08-06 14:50:19 +01:00
10af90ac0a
Resolve adi_tmr_ConfigTimer api conflict in us_ticker.c for both EV_COG_AD4050LZ and EV_COG_AD3029LZ
2018-08-06 16:41:55 +10:00
da6c6bdc49
Resolve adi_tmr_ConfigTimer discrepancy between __ADuCM4050__ and __ADuCM3029__
2018-08-06 16:36:36 +10:00
6a7bfeba6d
Disable unused Configuration data from compiler warning
...
Add __ADuCM3029__ constants
2018-08-06 16:32:18 +10:00
20de3366ae
Add C++ linkage for adi_tmr.h
2018-08-06 16:25:32 +10:00
9579440ce7
Add __ADUCM4050__ and __ADUCM3029__ to include MCU specific configurations
2018-08-06 16:23:25 +10:00
f2aae22f92
Refactoring memory regions definitions for MPS2_M0 targets
...
* align MPS2_M0 FVP target with other MPS2 targets
* moved memory_zones.h
* chnage the flash_api.c where referencing the old memory_zones
* modify mbed_rtx.h to use the memory_zones definations as INITIAL_SP
* all linker scripts reference the definitions from memory_zones.h
* tool chains use predefined 1K as ISR Stack size
* ARM Complier 5 and GCC will auto calculated heap size
* IAR use predefined 2MiB as heap size
2018-08-06 01:48:53 +01:00
6f92504467
Refactoring memory regions definitions for MPS2_M0P targets
...
* added memory_zones.h
* all linker scripts reference the definitions from memory_zones.h
* tool chains use predefined 1K as ISR Stack size
* ARM Complier 5 and GCC will auto calculated heap size
* IAR use predefined 2MiB as heap size
2018-08-06 01:43:45 +01:00
8fc384296e
Refactoring memory regions definitions for MPS2_M7 targets
...
* added memory_zones.h
* all linker scripts reference the definitions from memory_zones.h
* tool chains use predefined 1K as ISR Stack size
* ARM Complier 5 and GCC will auto calculated heap size
* IAR use predefined 2MiB as heap size
2018-08-06 01:42:33 +01:00
7159329efc
Refactoring memory regions definitions for MPS2_M4 targets
...
* added memory_zones.h
* all linker scripts reference the definitions from memory_zones.h
* tool chains use predefined 1K as ISR Stack size
* ARM Complier 5 and GCC will auto calculated heap size
* IAR use predefined 2MiB as heap size
2018-08-06 01:42:15 +01:00
a9f44812ca
Refactoring memory regions definitions for MPS2_M3 targets
...
* added memory_zones.h
* all linker scripts reference the definitions from memory_zones.h
* tool chains use predefined 1K as ISR Stack size
* ARM Complier 5 and GCC will auto calculated heap size
* IAR use predefined 2MiB as heap size
2018-08-06 01:41:35 +01:00
f335fc10a6
Fix for CM3DS GPIO api
2018-08-03 15:10:49 +02:00
96457ab1e0
mbed-os-example_blinky didn't work with wise-1530, so MTB_ADV_WISE_1530
...
led configuration have been updated.
Also minor update to MTB_MXCHIP_EMW3166 led configuration, led3 is now
defined but not connected.
2018-08-03 10:29:13 +03:00
ae40a09036
Merge pull request #7508 from mprse/ticker_free
...
Ticker free() - requirements, pseudo code, tests, implementation
2018-08-02 23:05:14 -05:00
1023280bd9
Merge pull request #7676 from OpenNuvoton/nuvoton_organize_file_struct
...
Nuvoton: Organize file structure
2018-08-02 10:13:36 -05:00
0046800c09
SDT64B in targets.json simplified
2018-08-02 22:34:14 +09:00
ace821017f
Add implementation of ticker_free() function to CI boards.
...
This PR provides implementation of ticker_free() function for the following boards:
ARCH_PRO
EV_COG_AD3029LZ
EV_COG_AD4050LZ
K22F
K64F
K82F
KW24D
KW41Z
LPC546XX
NRF51_DK
NRF52_DK
NUCLEO_F207ZG
NUCLEO_F401RE
NUCLEO_F429ZI
NUCLEO_F746ZG
REALTEK_RTL8195AM
2018-08-02 09:48:10 +02:00
04fcd33f15
Renesas : Improve Flash iap
...
I modified the _page_program() because when the request of the size exceeding the maximum size(256 byte) per one writing of Flash recieved, it was not able to loop the writing with sifting the address every 256 byte.
Also I modified the return value of flash_get_page_size() because I found that the minimum size per one writing of Flash is 1 byte by reviewing Flash spec.
"FLASH_PAGE_SIZE" macro's value is remain 256, it doesn't be used at flash_get_page_size(), used at _page_program() for refferencing of the maximum page size.
2018-08-02 13:48:56 +09:00
f9862b84e5
Merge pull request #7668 from bcostm/fix_cleanup_f7_hal_inittick
...
STM32F7: remove HAL_InitTick() declaration in us_ticker_data.h files
2018-08-01 21:42:22 -05:00
b74a1ddf0d
Merge pull request #7552 from TomoYamanaka/feature-lp-ticker
...
Renesas: Add LPTICKER
2018-08-01 15:01:30 +02:00
9df48f561b
Merge pull request #7606 from bcostm/PULL_REQUEST_CUBE_UPDATE_F1_V1.6.1
...
STM32F1: update to CubeF1 V1.6.1
2018-08-01 15:00:21 +02:00
2ec99158ef
Merge pull request #7642 from ashok-rao/SPI_CS_fix
...
Changing default SPI CS pin to SD card on MTB
2018-08-01 14:57:26 +02:00
c6aeaf0e52
Merge pull request #7658 from KariHaapalehto/update_wiced
...
Add default interface for wiced WiFi.
2018-08-01 14:55:53 +02:00
6909159420
[Nuvoton] Organize file structure
...
This re-organization is to avoid duplicates regarding targets of the same MCU series.
2018-08-01 18:00:16 +08:00
209a9dcc94
SDT52832B added
2018-08-01 18:21:45 +09:00
784d17f68b
SDT51822B added
2018-08-01 18:20:22 +09:00
0634be8b5f
SDT32625B added
2018-08-01 18:18:31 +09:00
df3afa7b57
SDT32620B added
2018-08-01 18:17:16 +09:00
4a06f59de0
SDT8195B added
2018-08-01 18:15:46 +09:00
e5877910d2
SDT64B added
2018-08-01 18:13:33 +09:00
2c96c5d270
STM32F7: remove HAL_InitTick() declaration in us_ticker_data.h files
2018-08-01 09:56:39 +02:00
63f62165d8
Merge pull request #7565 from OpenNuvoton/nuc472_emac_rst
...
Nuvoton: Fix NUC472 SD-Host HW IP reset definition
2018-07-31 11:44:01 -05:00
642fb9cc2c
Merge pull request #7622 from nismad01/myfix
...
MPS2 platform: Enable interrupt on rx for UART
2018-07-31 11:39:50 -05:00
d65abb662f
Merge pull request #7289 from mikaleppanen/odin_iar_heap_inc
...
On STM32F439xI IAR linker file decreased stack size and increased heap
2018-07-31 11:36:52 -05:00
cf84b05473
Merge pull request #6985 from OpenNuvoton/nuvoton_fix_rtosless_heap
...
Fix heap base/limit error with ARM_LIB_STACK/ARM_LIB_HEAP in RTOS-less
2018-07-31 11:36:42 -05:00
83c8571e68
WiFiInterface::get_target_default_instance() added to TARGET_WICED.
2018-07-31 15:54:20 +03:00
87496df078
Add the clear process of "inited" flag in lp_ticker_free()
...
I added "lp_ticker_inited = 0" in lp_ticker_free() of lp_ticker.c, so
re-initialization will work.
2018-07-31 19:22:04 +09:00
52cbc33d44
Implementation of LPTICKER feature for Renesas mbed boards
...
Although other venders implement this feature by using RTC, in my H/W(RZ_A1), I cannot use RTC because it does not satisfy the spec of LP Ticker (ms order and low frequency between 8 KHz and 64 KHz).
Therefore I implemented this feature by creating 1024 division by MTU2(Multi function Timer pulse Unit 2) in order to satisfy this spec.
As a result of investigating, the most unaffected channel among MTU2 placed on GR-PEACH and GR-LYCHEE was channel 3, so I use channel 3 for this feature.
- mbed_drv_cfg.h
I added a macro of MTU2 channel to this file for commonalizing code for GR-PEACH and GR-LYCHEE, and referenced it's macro at us_ticker.c.
- targets.json
I added a macro for enabling LP Ticker.
- mtu2.c mtu2.h
I defined fuction of MTU2's clock supply and stop.
Because MTU2 is utilized by pwm driver too, those function were referenced at lp_ticker driver and pwm driver.
- lp_ticker.c lp_ticker_init()
In order to satisfy the LP Ticker spec, I implemented by creating 1024 division by MTU2.
When an interrupt is required, it will be set with ticker_set_interrupt().
- lp_ticker.c lp_ticker_free()
This function stops the counting and powerdown the lp_ticker.
- lp_ticker.c lp_read()
This function returns the timer counter of MTU2.
- lp_ticker.c lp_ticker_set_interrupt()
In order to satisfy specifications, I implemented lp_ticker_set_interrupt() function.
- lp_ticker.c lp_ticker_fire_interrupt()
In order to satisfy spec, I implemented lp_ticker_fire_interrupt() function.
Also I added GIC_EnableIRQ for allowing the interrupt at end of function.
- lp_ticker.c lp_ticker_get_info()
To satisfy the spec, I implemented lp_ticker_get_info() function. The value of freq includes rounding off.
2018-07-31 19:22:03 +09:00
ffb4f926e9
Artistic style applied and updated power function
2018-07-30 19:41:02 +05:00
db91e7ed02
nrf_drv_twi: remove redundant nrf_drv_disable call in nrf_drv_twi_uninit
...
i2c_api implementation for NRF52 does a disable() followed by uninit().
The uniinit() implementation in NRF drivers layer makes another call to
disable. This throws off the state of the I2C instance leading to an
assert. Since the disable is only invoked from the I2C API layer for
Nordic, remove this redundant call.
Signed-off-by: Naveen Kaje <Naveen.Kaje@arm.com>
2018-07-30 09:18:43 -05:00
9598dd9f12
STM32: remove uart force_reset at init
2018-07-30 14:52:31 +02:00
8c07fcd09f
Changing default SPI CS pin to SD card on MTB
2018-07-30 12:23:37 +01:00
5567ac3be6
MPS2 platform: Enable interrupt on rx for UART
2018-07-27 14:11:27 +02:00
a8abeccdac
UBLOX cellular api's for UDP and TCP
2018-07-26 19:20:38 +05:00
b47e599281
F1 ST CUBE V1.6.1: add I2C patches
2018-07-26 15:44:31 +02:00
313f322cf7
[Nuvoton] Replace __wrap__sbrk with overriding _sbrk
...
With _sbrk being weak, we can override it directly rather than #if to support heap with
two-region model.
2018-07-26 15:47:25 +08:00
8ce35ba845
F1 ST CUBE V1.6.1
...
- stm32f1xx hal V1.1.2
2018-07-25 14:20:11 +02:00
7adfcbef71
Merge pull request #7551 from M-ichae-l/realtek-rtl8195am-remove-DEVICE_EMAC
...
realtek rtl8195am remove DEVICE_EMAC
2018-07-25 14:18:57 +02:00
caf06e83c1
[Nuvoton] Fix __user_setup_stackheap and ARM_LIB_STACK/ARM_LIB_HEAP cannot co-exist in RTOS-less build
2018-07-25 17:19:09 +08:00
c0ee843d63
Add lp/us ticker_free() functions stub.
...
This patch adds only empty stubs of `us_ticker_free()` and `lp_ticker_free()` for all boards where these functions are not implemented.
2018-07-25 08:58:38 +02:00
d6ae30a728
[Nuvoton] Merge multiple ARM/ARMC6 sys.cpp into one
2018-07-25 10:04:31 +08:00
e4108b5842
Merge pull request #7554 from jamesbeyond/fm_flash
...
Enable HAL Flash API on Fast Models MPS2 targets
2018-07-24 11:47:00 -05:00
5d5ca62a5e
Merge pull request #7553 from bcostm/fix_L496_sct
...
STM32L496: fix RAM size in ARM scatter file
2018-07-23 10:14:05 -05:00
0c2ffe5e58
Merge pull request #7519 from Wiznet/master
...
Wiznet: fix us_ticker & gpio bug
2018-07-23 10:13:10 -05:00
21dbbc5e8b
Merge pull request #7510 from mattbrown015/fix_stm32_gpio_irq_deepsleep
...
STM32: Improve GPIO IRQ edge detection when waking from deepsleep
2018-07-23 10:12:49 -05:00
057138c2a0
Merge pull request #7536 from ganesh-ramachandran/master
...
Add Support for Toshiba TMPM3H6
2018-07-20 12:38:25 -05:00
bb7b97cadc
Merge pull request #7491 from evva-sfw/feature/EFM32_make_PeripheralPins_overridable
...
EFM32: fix weak PeripheralPins configuration
2018-07-20 08:01:39 -05:00
240619745d
Fixed NUC472 SD & EMAC IP reset define
2018-07-20 18:23:41 +08:00
541fc1f28b
Merge pull request #7539 from jeromecoutant/PR_LL_API
...
STM32F2/F4/F7 : LL API is now available for IRQ
2018-07-19 20:43:28 -05:00
218811024f
Merge pull request #7479 from SiliconLabs/feature/crc
...
Silicon Labs: Add support for hardware CRC
2018-07-19 13:06:42 -05:00
f207944341
enable HAL FLASH API on Fast Models MPS2 targets
2018-07-19 14:41:21 +01:00
bf8587ed50
STM32L496: fix RAM size in ARM scatter file
2018-07-19 14:02:05 +02:00
8673286100
Resolved conflict in targets/targets.json
2018-07-19 16:32:51 +05:30
bfcfe9cc4b
Added Support for Toshiba TMPM3H6
2018-07-19 16:31:11 +05:30
b6a67c103b
realtek rtl8195am remove DEVICE_EMAC
...
1, remove DEVICE_EMAC for wifi feature
2018-07-19 18:07:18 +08:00
dd6482b955
Merge pull request #7504 from TacoGrandeTX/feature_itm_fix
...
Feature itm fix
2018-07-18 09:01:13 -05:00
db9a0e8b72
Merge pull request #7533 from marcuschangarm/fix-nrf52832-iar
...
Fix linker script for NRF52832/IAR
2018-07-18 08:56:44 -05:00
e9e1ff997d
Merge pull request #7302 from OpenNuvoton/nuvoton_m2351_v1.1
...
Support Nuvoton's NUMAKER_PFM_M2351 target
2018-07-18 08:49:55 -05:00
59fd0c0cce
STM32F2/F4/F7 : LL API is now available
2018-07-18 15:17:46 +02:00
9a073c0ae4
Fix linker script for NRF52832/IAR
...
IAR linker script was using memory settings from the NRF52840 and
not the NRF52832.
2018-07-17 12:43:23 -07:00
804edd578e
Place "MBED_WEAK" for IAR-Toolchain before the type.
2018-07-17 08:12:41 +02:00
ed94e6aa35
Add bootloader configuration parameters for MAX32625PICO and rework targets.json
2018-07-16 18:26:51 -05:00
de266d827e
Added missing include.
2018-07-16 19:28:54 +02:00
1658349965
Replace __attribute__((weak)) with MBED_WEAK
2018-07-16 15:38:25 +02:00
a8dcf52971
Make PeripheralPins.c configuration tables weakly defined to be overridable for target EFM32GG11.
2018-07-16 12:35:44 +02:00
95d78df962
EFM32 Make PeripheralPins.c configuration tables weakly defined to be overridable.
...
See issue "https://github.com/ARMmbed/mbed-os/issues/7424#issuecomment-404233377 "
2018-07-16 11:48:53 +02:00
86491627bf
Add implementation for CRC API
2018-07-16 11:08:45 +02:00
8b5485664d
fix timer Interrupt callback function bug
2018-07-16 14:44:15 +09:00
65601525d6
add Systick configuration function in Init function
2018-07-16 14:43:45 +09:00
3b412128af
fix GPIO bug & typo
...
initialization bug
2018-07-16 14:42:48 +09:00
6e86402d8a
add GPIO Pad Type Define & fix typo
2018-07-16 14:41:19 +09:00
455f1fd440
[M2351] Support only ARMC6 toolchain
...
Support for GCC_ARM/IAR toolchains are TODO.
2018-07-16 10:15:36 +08:00
38744b9e68
Merge pull request #7498 from bcostm/fix_hsi_lse_lpuart
...
STM32: enable HSI/LSE clocks for LPUART
2018-07-14 13:33:35 -05:00
671b3c875e
Merge pull request #7507 from jeromecoutant/PR_LPTIM
...
STM32 LPTICKER with LPTIM minor update
2018-07-14 06:29:36 -05:00
602b0cea09
Merge pull request #7079 from SiliconLabs/feature/EFM32GG11-OS5.9
...
Add support for EFM32GG11
2018-07-13 17:33:34 -05:00
cc8651e45c
Merge pull request #7505 from naveenkaje/pushbranch
...
Fix linker script for NRF52840/ARM
2018-07-13 13:30:25 -05:00
531ee3c5d4
Merge pull request #7461 from 0xc0170/fix_raytac_removal
...
Raytac: target removal
2018-07-13 11:46:58 -05:00
2bbe043793
[M2351] Adding missing ENDP for ARM
2018-07-13 10:56:45 -05:00
7ef70223fb
Improve GPIO IRQ edge detection when waking from deepsleep
2018-07-13 16:02:31 +01:00
1145d6bb3c
Merge pull request #7489 from mirelachirica/wise_1570_hsi_source_clock
...
Cellular: HSI set to be source clock for WISE_1570
2018-07-13 09:12:22 -05:00
8a0b83233a
STM32 LPTICKER with LPTIM minor update
...
Code cleaning (L0 Cube update, comment precision)
2018-07-13 10:03:31 +02:00
ed251020b6
NRF52832 linker script: formatting fix
2018-07-12 15:19:13 -05:00
192eb28814
Fix linker script for NRF52840/ARM
2018-07-12 15:19:13 -05:00
0198481f8f
Improved formatting for preprocessor conditionals.
2018-07-12 13:30:36 -05:00
10b90edea3
Fix ITM on NRF52 series
...
The ITM must be initialized before the SoftDevice, but due to the
lazy initialization in C++ on (at least) GCC the ITM init call
might happen too late.
This commit moves the initialization code into the NRF52 system
startup file.
2018-07-12 13:29:24 -05:00
f4c936f455
Merge pull request #7486 from marcuschangarm/fix-nrf52-iar
...
Fix linker script for NRF52840/IAR
2018-07-12 10:09:12 -05:00
6300d8b5e4
Merge pull request #7487 from marcuschangarm/fix-nrf52-serial
...
Allow STDIO pins to be NC in NRF52 series
2018-07-12 10:05:08 -05:00
665de33cc6
stm32 lpuart: enable lse and hsi if not done
2018-07-12 15:58:02 +02:00
e61c5146c6
[M2351] Fix binary-compatible across compilers in secure functions
...
1. Rename m2351_stddriver_sup.h/c to stddriver_secure.h/.c for naming consistency
2. Add hal_secure.h to include hal-exported secure functions
3. Change return/argument type in secure functions:
(1) Change int to int32_t
(2) Change PinName to int32_t
(3) Change time_t to int64_t
4. Update secure lib/bin accordingly
2018-07-12 18:01:41 +08:00
6bf8e191af
[M2351] Support configurable for partitioning flash/SRAM
2018-07-12 18:01:39 +08:00
778aa1e766
[M2351] Place default secure binary/library
2018-07-12 18:01:38 +08:00
31bf7bf342
[M2351] Fix include file name error on case-sensitive system
2018-07-12 18:01:36 +08:00
d350f45b4b
[M2351] Synchronize lp_ticker code to us_ticker
...
This is to make us_ticker/lp_ticker code consistent.
2018-07-12 18:01:35 +08:00
688029a511
[M2351] Remove special handling for dummy interrupt in lp_ticker
...
It is because dummy interrupt is very rare or pending time caused by it
is very short.
2018-07-12 18:01:34 +08:00
124b4ad557
[M2351] Remove NUMAKER_PFM_M2351_S/_NS targets
2018-07-12 18:01:33 +08:00
c382e9642e
[M2351] Upgrade chip version to B from A
...
There is a reset halt issue with PLL in A version.
To switch back to A version for some reason, define NU_CHIP_MAJOR to 1.
2018-07-12 17:52:10 +08:00
Martin Kojtal
Juho Eskeli
Markus Siglreithmaier
Cruz Monrreal
jeromecoutant
Ganesh Ramachandran
TomoYamanaka
alrodlim
Steven
bcostm
Deepika
Andrew Leech
ccli8
Filip Jagodzinski
thesupershan
Aleshandre Diaz
Russ Butler
Mahesh Mahadevan
Naveen Kaje
mattbrown015
Cesar
Kari Haapalehto
zzw
Yossi Levy
Michael Kaplan
Maciej Bocianski
Seppo Takalo
Jammu Kekkonen
Ammad Rehmat
Wajahat Abbas
justinkim
Edmund Hsu
Steven Cooreman
Fred.Li
ben
Ashok Rao
Oren Cohen
adustm
Martin Kojtal
Senthil Ramakrishnan
Qinghao Shi
David Saada
Simo Sillankorva
Jiwon Yune
MateuszM
Mika Leppänen
Mirela Chirica
Laurent Meunier
Jiwon Yune
Bence Kaposzta
Przemyslaw Stekiel
mudassar-ublox
Nis Madsen
cyliangtw
Marcus Chang
PHST
Keyur Hariya
RFulchiero