716c51d232
Deleting doubled files
2015-01-06 00:35:57 +01:00
11c2a5b888
error correction rebas and build_travis extension
...
travis_build ok
all tests for nucleo_f0xx and nucleo_f3xx ok
2015-01-05 23:59:58 +01:00
f5c3b18d75
[NUCLEO_F091RC] adding exporter (gcc_arm, coide), enable rtos
...
- Adding exporter for CoIDE and GCC_ARM
- Adding target to RTOS lib
2015-01-05 22:55:18 +01:00
5ebdb92e78
[NUCLEO_F072RB] adding target to rtos lib
...
Every test (DTCT_1, EXAMPLE_1, MBED_xx, RTOS_x) is OK.
2015-01-05 22:43:52 +01:00
f2a6eeca8d
[NUCLEO_F334R8] Correct the code used during initialization
2015-01-05 14:47:38 +01:00
ad9b6a7119
Merge branch 'master' of https://github.com/mbedmicro/mbed
2015-01-05 14:14:41 +01:00
914dd37b11
Merge pull request #818 from ohagendorf/stm32l053_rtos
...
DISCO/NUCLEO_L053xx - adding to RTOS, corrections for all tests, [DISCO_L053] exporter to µVision
2015-01-05 08:08:00 +01:00
47ac39b3fd
Merge pull request #812 from perkristian/master
...
RTOS: Fix stack alignment
2015-01-05 08:01:09 +01:00
e1309e658a
Merge pull request #811 from albert361/master
...
Add IAR toolchain support for DISCO_F429ZI
2015-01-05 07:57:36 +01:00
3aef1389d5
Merge pull request #829 from Kazu-zamasu/LPC824-GCC_CR
...
Tools: LPC824 - GCC_CR support
2015-01-05 07:55:21 +01:00
fdc60ac217
Merge pull request #827 from adamgreen/rtxNoStackCheckForMainThread
...
RTOS: Main thread should not write MAGIC_WORD to stack
2015-01-05 07:50:23 +01:00
5748a9da69
Merge pull request #826 from adamgreen/rtxSupportStacksLargerThan64k
...
RTX: Support stacks larger than 64k
2015-01-05 07:48:32 +01:00
f98dd149b9
[MTS_MDOT_F405RG] reorg hal folder
...
- reorganisation of this target needed some extension of serial_api.c
used by all F4xx tagets.
- add arch_max to travis_build
2015-01-04 14:15:16 +01:00
0498e2619b
[STMF4xx] reorg hal folder
...
- some minor error correction
- add pin definition for 3 tests (MBED_A5,6,7)
- add new target disco_f401vc to travis_build
travis_build and all test are OK except missing STM32F4 target
MTS_MDOT_F405RG
2015-01-04 14:14:52 +01:00
3d886a94dc
[MTS_DRAGONFLY_F411RE] reorg hal folder
2015-01-04 14:11:32 +01:00
41975149c2
[DISCO_F407/ARCH_MAX] reorg hal folder
2015-01-04 14:11:03 +01:00
3a2ec50d0e
[DISCO_F429ZI] reorg hal folder
2015-01-04 14:10:34 +01:00
cf8c8689e6
[NUCLEO_F411][MTS_MDOT_F411] reorg of hal folder
2015-01-04 14:07:43 +01:00
484d9359ba
[DISCO/NUCLEO_F401xx] reorg of hal folder
2015-01-04 14:06:51 +01:00
b066ebff90
Add to GCC_CR
...
New create GCC_CR LPCXPresso export.
2015-01-04 12:02:01 +09:00
461403989c
RTX: Main thread should not write MAGIC_WORD to stack
...
This is a fix for issue #285 . This fix is similar to that proposed by
@oresths in the original issue.
There is code in rt_init_stack() which compares the task_id against the
value of 1 before writing MAGIC_WORD to the bottom of the stack. This
is supposed to stop the write from occurring for the main thread but
svcThreadCreate() doesn't initialize the P_TCB's task_id field until
after rt_init_stack() is executed. If any dynamic memory allocation
has occurred before the main thread is started (from the standard C
startup code) then this write could overwrite data in that allocation.
This change:
* moves the task_id initialization in svcThreadCreate() to happen
before the call to rt_init_context() is made.
* cleans up some comments in svcThreadCreate() which appear to
reference older versions of the code which would automatically
allocate stack memory if size == 0.
* still keeps the call to rt_dispatch() occurring after the call to
rt_init_context() so that the task is not dispatched to the
scheduler until the task fields have been populated.
I stepped through the rt_init_stack() code on my mbedLPC1768 after this
change was made to make sure that the write of MAGIC_WORD is now
skipped.
-----------------------------------------------------------------------
(gdb) break HAL_CM.c:95
Breakpoint 1 at 0x482c: file ../../external/mbed/libraries/rtos/rtx/TARGET_CORTEX_M/HAL_CM.c, line 95.
(gdb) c
Continuing.
Note: automatically using hardware breakpoints for read-only addresses.
Breakpoint 1, rt_init_stack (p_TCB=0x10000774 <os_idle_TCB>, task_body=0x4899 <os_idle_demon>)
at ../../external/mbed/libraries/rtos/rtx/TARGET_CORTEX_M/HAL_CM.c:95
95 if (p_TCB->task_id != 0x01)
(gdb) p *p_TCB
$1 = {
cb_type = 0 '\000',
state = 1 '\001',
prio = 0 '\000',
task_id = 255 '\377',
p_lnk = 0x0 <_reclaim_reent>,
p_rlnk = 0x0 <_reclaim_reent>,
p_dlnk = 0x0 <_reclaim_reent>,
p_blnk = 0x0 <_reclaim_reent>,
delta_time = 0,
interval_time = 0,
events = 0,
waits = 0,
msg = 0x0 <_reclaim_reent>,
stack_frame = 0 '\000',
reserved = 0 '\000',
priv_stack = 128,
tsk_stack = 268437480,
stack = 0x100007a8 <idle_task_stack>,
ptask = 0x4899 <os_idle_demon>
}
(gdb) c
Continuing.
Breakpoint 1, rt_init_stack (p_TCB=0x10000120 <os_thread_def_main+16>, task_body=0x620d <__wrap_main()>)
at ../../external/mbed/libraries/rtos/rtx/TARGET_CORTEX_M/HAL_CM.c:95
95 if (p_TCB->task_id != 0x01)
(gdb) p *p_TCB
$2 = {
cb_type = 0 '\000',
state = 1 '\001',
prio = 4 '\004',
task_id = 1 '\001',
p_lnk = 0x0 <_reclaim_reent>,
p_rlnk = 0x0 <_reclaim_reent>,
p_dlnk = 0x0 <_reclaim_reent>,
p_blnk = 0x0 <_reclaim_reent>,
delta_time = 0,
interval_time = 0,
events = 0,
waits = 0,
msg = 0x0 <_reclaim_reent>,
stack_frame = 0 '\000',
reserved = 0 '\000',
priv_stack = 26968,
tsk_stack = 268467136,
stack = 0x100012a8,
ptask = 0x620d <__wrap_main()>
}
(gdb) n
97 }
When the p_TCB for ptask==__wrap_main() is encountered, the task_id
now has a value of 1 and the write of MAGIC_WORD on line 96 is
skipped.
2015-01-02 17:24:48 -08:00
d587474778
RTX: Support stacks larger than 64k
...
This issue was originally reported on the mbed site:
http://developer.mbed.org/questions/5570/mbed-rtos-memory-utilization/
The cause of the 64k limitation is that even though the user can set a
stack size larger than 64k in the osThreadDef_t::stacksize 32-bit
field, this size is truncated to 16-bit when it is copied to
the priv_stack field in the OS_TCB structure.
This commit corrects that problem by making the OS_TCB::priv_stack
field 32-bit. Due to word alignment, this introduces another 2 bytes
of padding in the structure which I have made explicit with the
addition of the reserved2 field.
The tsk_stack field which follows priv_stack is referenced directly by
assembly language code responsible for context switching. This context
switching code used a fixed byte offset, TCB_TSTACK, to access this
tsk_stack field. I had to update the TCB_TSTACK definition in various
locations from 36 to 40 to account for the extra alignment padding and
increased size of the priv_stack field.
TESTING
* GCC_ARM - mbedLPC1768 and mbedLPC11U24
* Online mbed Compiler - mbedLPC1768 and mbedLPC11U24
NOTES: I had to change assembly language code that was specific to IAR
but I don't have that toolchain so those changes aren't tested.
They do however follow the same pattern as the tested GCC
modifications.
2015-01-02 13:14:40 -08:00
43e6502f00
[DISCO_F401VC] new target incl. exporter to gcc_arm and coide
2015-01-02 19:09:41 +01:00
b9bef6b06e
[DISCO/NUCLEO_L053xx] adding to RTOS - part3
...
Reverting the DEFAULT_STACK_SIZE changes in cmsis.oh.h and adding
changes to RTOS_x tests, to create threads with the neccessary reduced
stack sizes for these targets.
2015-01-02 14:52:39 +01:00
ad6e208c7e
[DISCO_L053xx] RTC LSE/LSI problem
...
The mcu STM32L053C8 seems to have a problem in the RCC - LSE hardware
block. The Disco_L053 don't have a 32kHz crystal connected to LSE port
pins in contrast to NUCLEO_L053.
During initialization the HAL tests if it can start the LSE oscillator.
The Flag LSERDY in RCC_CSR is set to 1 by RCC clock control when the
oscillator runs stable. Without a crystal the flag shouldn't be set and
the HAL trys to start the internal LSI oscillator.
But the flag is always set to 1 also without a crystal. That's why the
RTC doesn't start.
2015-01-02 12:17:35 +01:00
32f5b97aa7
[DISCO_L053xx] wrong STDIO UART
...
Correction of a wrong stdio uart - some tests failed because of this.
2015-01-02 12:17:35 +01:00
6fa0730f47
[DISCO/NUCLEO_L053xx] adding to RTOS - part2
...
Stack sizes has to be reduced because of the limited 8K RAM.
2015-01-02 12:17:34 +01:00
0ac123d488
[DISCO/NUCLEO_L053xx] adding to RTOS
2015-01-02 12:13:44 +01:00
c59b34f22a
Fix stack aligment.
...
Stack should be 8 byte aligned on ARM.
Fix the automatic correction of the alignment in rt_init_stack,
and make sure that all stacks are aligned by the compiler.
2015-01-02 10:20:36 +01:00
d198fba547
Merge pull request #821 from ohagendorf/exporter_coide_gccarm
...
NUCLEO/DISCO L053,F103,F100,F051 - adding exporter to gcc_arm and coide
2015-01-02 09:04:06 +01:00
7234182bfd
Merge pull request #817 from masaohamanaka/master
...
RZ_A1H - Modify frequency setting processing of SPI
2015-01-02 08:26:57 +01:00
77d645476d
Merge pull request #810 from ohagendorf/STM32F3xx_rtos
...
DISCO/NUCLEO_F3xx - solving RTOS problem
2015-01-02 07:48:54 +01:00
9af828a11f
Merge branch 'master' of https://github.com/mfiore02/mbed into mfiore02-master
...
Conflicts:
workspace_tools/build_travis.py
2015-01-02 07:12:11 +01:00
aaede9c070
[DISCO_F051R8] exporter to coide and a naming correction
...
In PeripheralNames.h the PWM timer name was wrong. Changed from TIMxx to
PWMxx.
2014-12-31 17:46:32 +01:00
020faf70e6
Fix icf settings for head and stack size
2014-12-30 22:55:11 +08:00
62a1b8d103
[DISCO/NUCLEO_F334] solving RTOS Problem
...
Decreasing OS_SCHEDULERSTKSIZE to 112 bytes solves the problem of the
failed test RTOS_3 (Semaphore resource lock).
The test itself was successfull but the final printf failed.
With the reduced stacksize now every test is OK.
2014-12-29 01:34:57 +01:00
5df957e0d8
[NUCLEO_F302R8]
...
There exists an inconsistency between official STM schematic of Nucleo
boards and the existing hardware. Each board should have an 8MHz
external clock source. That is not the case. At some boards the solder
jumper is existing and with that the external clock source. At some
other boards the solder jumper is not available. The Nucleo_F302 should
run with 72MHz but that is only possible with an external clock source.
Because of a missing solder jumper it runs only with the internal clock
source, and that's why only with 64MHz.
2014-12-28 22:54:46 +01:00
6126cb7b41
Modify frequency setting processing of SPI
...
In case of off-line compiler, there is no problem about the frequency setting processing.
But in case of online compiler, the frequency setting processing will be error.
So, modify frequency setting processing of SPI to pass in online compiler.
2014-12-26 17:40:42 +09:00
2f63fa7d78
Merge pull request #815 from toyowata/master
...
Targets: LPC4337 - Fix RTC clock setting issue
2014-12-25 19:35:15 +01:00
7b62e7d5d6
[LPC4337] Remove init variable for RTC
...
- Remove static variable for initialization check
- Add enabled flag check for RTC control register
2014-12-25 09:41:33 +09:00
44c66b1062
[LPC4337] Fix RTC clock setting issue
...
- Fixed missing RTC clock intialization code
- Confirm to pass RTC test case (MBED_16)
2014-12-24 18:09:47 +09:00
21b2445fad
Fix typo.
...
1AB -> 1AF
2014-12-24 11:18:35 +08:00
3fdeca703c
Fix NVIC memory region and rtos verified
...
1. Add NVIC region in icf file.
2. Increase STACK and HEAP size.
3. mBed rtos is verified.
2014-12-24 11:16:26 +08:00
a1653f2708
Fix KL05Z GCC_ARM linker script
...
Issue originally reported on mbed site here:
https://developer.mbed.org/questions/5695/FRDM-KL05z-hardfault-when-compiled-with-/
The RAM base address was incorrectly set to the beginning of RAM
instead of at a 0xC0 byte offset to reserve room for the interrupt
vectors. Without this fix, the global variables and the interrupt
vectors were occupying the same space in RAM once the user enabled the
timer interrupt.
The user who originally reported the issue on the mbed site has tested
this fix and verified that it corrected the hard fault issue that they
were encountering.
2014-12-23 19:03:09 -08:00
282c31f57e
Add IAR toolchain support for DISCO_F429ZI
2014-12-23 14:41:20 +08:00
e48aabed4c
[DISCO/NUCLEO_F3xx] solving RTOS Problem
...
- add targets (except DISCO_F303VC) to tests.py - RTOS_x tests
- a minor bug fix for DISCO_F334: had wrong STDIO_UART_TX/RX pin
settings
2014-12-22 16:58:42 +01:00
ef626d7f68
[NUCLEO_F334R8] Fix issue with multiple ADC initialization
2014-12-22 11:04:02 +01:00
4dd46fd82a
Merge branch 'master' of https://github.com/mbedmicro/mbed
2014-12-22 08:40:08 +01:00
32cea97577
Added simple tests for BusOut component to check if we can use new features of BusOut::operator[] and DigitalOut::is_connected()
2014-12-19 15:36:55 +00:00
56e7514495
Modiffied _ns_mack member's comment in Bus classes (BusIn, BusOUt, BusInOut)
2014-12-19 14:59:06 +00:00
8690af3b7b
Simple indent
2014-12-19 14:53:35 +00:00
11c5955959
Simple indent
2014-12-19 14:48:39 +00:00
7720989e20
Added operator[] and mask() function to BusInOut
...
This change follows changes in BUsIn and BusOUt API
2014-12-19 14:45:32 +00:00
db7e92853b
Added mask() function to BusIn and BusOut components
...
You can use BusIn::mask() or BusOut::mask() to get binary mask of all connected and NC pins in bus
2014-12-19 14:37:00 +00:00
c4fc8e68eb
Added operator[] for BusIn and BusOut to add access to particular bit in random-iterator fashion
2014-12-19 14:06:46 +00:00
6fa4b469f4
Decorated all HALs with gpio_is_connected() function implementation
2014-12-19 13:37:16 +00:00
a53cd59b51
Added is_connected() method to Digital I/O classes APIs (DigitalIn, DigitalOut and DigitalInOut
2014-12-19 13:31:54 +00:00
b7f4d17aae
Added new GPIO HAL function gpio_is_connected() used to check if gpio_t is connected or initialized with NC
...
Simple gpio_t structure in TARGET_KPSDK_MCUS field name changed to allign to other HALs
2014-12-19 13:14:53 +00:00
03f49ea8ef
[NUCLEO_F0] Align registers and system files with latest CMSIS files
...
Same as in new NUCLEO_F070RB target
2014-12-19 14:13:54 +01:00
bd803e5944
Merge pull request #805 from molejar/dev-freescale-kl43z
...
Targets: KL43Z - Fix some issues in serial, usb device and pins names
2014-12-19 11:10:08 +00:00
1eb8d7cab4
Added serial_get_src_clock() function into serial_api.c and fastirc_frequency() function into clk_freqs.h for better portability.
2014-12-19 10:55:37 +01:00
79ec104b3c
Merge pull request #801 from bcostm/master
...
Add new target - NUCLEO_F070RB
2014-12-19 09:48:14 +00:00
078c36b1c5
Merge pull request #802 from masaohamanaka/master
...
Targets: RZ_A1H - Fix some drivers bugs and modify some settings of OS and
2014-12-19 08:53:10 +00:00
e8f8f5ef6b
Merge pull request #803 from mazgch/master
...
fix HAL_NULL, add more GPIO_CLK macros
2014-12-19 08:32:48 +00:00
bb969921ec
Fixed baudrate calculation issue in serial_api.c, arduino compatible pins name and USB device for Freescale KL43Z Target
2014-12-18 22:37:11 +01:00
992afded5c
fix HAL_NULL, add more GPIO_CLK macros
2014-12-18 16:11:40 +01:00
0279c2a2ee
Modify some settings of OS and Ether
...
- Change default setting of CMSIS-RTOS RTX for Cortex-A9 to align with Cortex-M.
- Change the interrupt priority of Ether driver to align with other drivers.
2014-12-18 18:41:33 +09:00
e91e953a60
Fix some drivers bugs.
...
Changes as below.
-I2C
Change communication wait time and Frequency accuracy improvement of I2C.
- Frequency accuracy improvement
- Changed the wait time between one communication completed and the next communication start.
The wait time will be Low clock width by this changing.
-PWM
Modify processing of pulsewidth() of PWM
- Modify processing of pulsewidth() to match the specifications of the RZ_A1H.
-SPI
Fixed a bug that SPI driver is not able to communicate when transfer bit length is 16bit or 32bit.
- Frequency accuracy improvement
- Modify transfer processing when transfer bit length is 16bit or 32bit.
-Serial
Change the reference register macro of Serial
- Change the reference register macro to align with other driver codes.
2014-12-18 18:40:44 +09:00
6234082237
[NUCLEO_F070RB] Add new target - part 2 hal
2014-12-18 09:29:13 +01:00
796482d826
[NUCLEO_F070RB] Add new target - part 1 cmsis
2014-12-18 09:28:22 +01:00
97089befb4
[STM32F0] Update STM32Cube driver to support new devices
2014-12-18 09:26:02 +01:00
8d2fa50691
add new target BLE_SMURFS
2014-12-17 11:40:09 +08:00
2ef2204380
solving RTOS problem
...
Changing original STM Cube Driver to call _start instead of main to
initialise the rtos when using it. Without using rtos the behavior is
the same as before.
2014-12-17 01:18:56 +01:00
67fbbf0b63
Merge pull request #798 from rgrover/master
...
Targets: nrf51 - updating app_timer.c from Norid'c SDKv7.1.0
2014-12-16 08:14:11 +00:00
a67faf521f
Merge pull request #797 from ohagendorf/DISCO_F429_clockcycle
...
Targets: DISCO_F429ZI - clock frequency additions
2014-12-16 08:01:54 +00:00
7eb385ec41
[DISCO_F429ZI] changed clock settings
...
Correction of wrong comments.
2014-12-15 22:37:37 +01:00
429ff2731d
[mbed][MTS_DRAGONFLY_F411RE] fix reversed uart pins after rebasing from master
2014-12-15 15:05:07 -06:00
29bd94927e
updating app_timer.c from Norid'c SDKv7.1.0; hoping to fix the hangs reported around timers
2014-12-15 15:59:48 +00:00
6172cbea1a
Merge pull request #785 from rosterloh/disco_l053_hal_updates
...
Targets: DISCO_L053C8 - update from nucleo latest changes
2014-12-15 09:15:42 +00:00
1fb5426bf6
Merge pull request #793 from ohagendorf/STMF4xxx_rtos
...
DISCO_F4xx, NUCLEO_F4xx, MDOT_F4 - fix RTOS problem (init seq)
2014-12-15 09:01:35 +00:00
fb526c9205
Merge pull request #784 from masaohamanaka/master
...
Targets: RZ_A1H - Add the timer value wraparound processing to us_ticker
2014-12-15 08:55:35 +00:00
5aafaa0d63
Merge pull request #780 from GustavWi/iar_mbed
...
IAR: skip dynamic initialization, new common IAR startup file
2014-12-15 08:52:35 +00:00
2002b797ad
[DISCO_F429ZI] changed clock settings
...
Original STM32Cube F4 driver sets SYSCLK for STM32F429 to 16MHz. This
adds a 168MHz and 180MHz configuration to system_stm32f4xx.c generated
by STM32CubeMX code generator. The rtos clock configuration is changed
too. In singletest.py run everything is OK.
2014-12-15 07:32:53 +01:00
6f8f626bd6
[DISCO_F4xx][NUCLEO_F4xx][MDOT_F4] solving RTOS problem
...
- Changing original STM Cube Driver to call _start instead of main to
initialise the rtos when using it. Without using rtos the behavior is
the same as before.
- Adding DISCO_F429 to rtos
- Adding targets to RTOS_xx tests.
- All tests are OK. Tested with Nucleo and Disco boards. Not tested with
MDOT_F4 but that uses the same hal like nucleo_f411.
2014-12-13 22:50:02 +01:00
3212848c31
Fix a bug that coding mistakes of L2 cache
...
Coding mistakes as below.
while(PL310->INV_WAY && ((1 << assoc) - 1)); ->
while(PL310->INV_WAY & ((1 << assoc) - 1));
PL310->INTERRUPT_CLEAR = 0; ->
PL310->INTERRUPT_CLEAR = 0x000001FFuL;
2014-12-12 14:27:01 +09:00
8e3b9aba75
Add terminal defines of PWM and fix a bug that period can not be changed.
...
Fix a bug as below.
- Period can not be changed.
Restructions: 1. The upper limits is 491us
2. Change all period of the same channel when changing period.
2014-12-12 14:26:33 +09:00
fc7e246596
Remove needless processing regarding Interrupt.
...
EOIR writing will be done in IRQ handler.
EOIR writing is needless in each interrupt processing.
2014-12-12 14:25:41 +09:00
7417e1061d
Add some terminal setting of Serial and modify attach sequence.
...
Fix some bugs of Serial as below.
- TX/RX terminal of XBee(P7_4, P7_5) setting is reverse.
- P5_6 and P5_7 terminals can not be used.
- Tx interrupt will not occur at the right timing.
- There are no settings of WIFI Module terminals(P11_10,P11_11).
- There are no settings of Xbee Module terminals(P6_6,P6_7).
2014-12-12 14:25:08 +09:00
22a3c528c8
[mbed][MTS_DRAGONFLY_F411RE] remove old Dragonfly Directory
2014-12-11 14:02:13 -06:00
883215c80e
Merge branch 'dev_new' into dev
...
Conflicts:
workspace_tools/export/iar.py
workspace_tools/targets.py
2014-12-11 13:54:19 -06:00
743bf2b255
[mbed][MTS_DRAGONFLY_F411RE MTS_MDOT_F411RE NUCLEO_F411RE] remove unnecessary Dragonfly hal files & move PeripheralNames.h to mDot and Nucleo dirs to perserve differences from Dragonfly
2014-12-11 13:48:06 -06:00
83d03f35e5
[mbed][MTS_DRAGONFLY_F411RE] move Dragonfly support into TARGET_STMF411RE with rest of 411 products
2014-12-11 13:38:29 -06:00
4ade9b7ac3
[mbed][MTS_DRAGONFLY_F411RE] fix D2 pin mapping, remove PWM_OUT from PinNames.h
2014-12-11 13:20:45 -06:00
ff0b8fce30
[cmsis][MTS_DRAGONFLY_F411RE] set USE_PLL_HSE_EXTC to 0, causing problems with IAR export and we have no external clock option
2014-12-11 13:20:45 -06:00
2a5c204fa2
[mbed][MTS_DRAGONFLY_F411RE] fix pin names for spi to external flash
2014-12-11 13:20:45 -06:00
4b1ac52d91
[mbed][MTS_DRAGONFLY_F411RE] change wrong PLL members to correct values from ST Cube code
2014-12-11 13:20:45 -06:00
7a217c3fb5
[mbed][MTS_DRAGONFLY_F411RE] remove unnecessary VIMPINNAMES file
2014-12-11 13:20:45 -06:00
340b40ff1a
[mbed][MTS_DRAGONFLY_F411RE] add RADIO_TX/RX pins, correct reversed TX/RX pins for uart6
2014-12-11 13:20:45 -06:00
f41a29e14c
[mbed][MTS_DRAGONFLY_F411RE] clean up PinNames.h
2014-12-11 13:20:45 -06:00
6d9d5961c5
[mbed][MTS_DRAGONFLY_F411RE] fix stdio uart decl, fix D3 pin decl, change blinky test main.cpp back to original
2014-12-11 13:20:45 -06:00
546005a72c
[mbed][MTS_DRAGONFLY_F411RE] added platform support files and dirs built gcc executable NOT working
2014-12-11 13:20:45 -06:00
77c3fe2358
updated latest changes from nucleo
2014-12-11 14:55:45 +00:00
c08208fe4f
Update upstream pushed files
2014-12-11 19:26:03 +09:00
54999646a1
[NUCLEO_L053R8] Removed call to Systick (mbed RTOS compliancy)
2014-12-11 11:16:02 +01:00
1970328da3
Add the timer value wraparound processing to us_ticker
...
Timer value wraparound operation had not been considered in us_ticker.
So, User could not set upper than 128s to argument of wait().
2014-12-11 19:07:50 +09:00
f71b0a06c7
Revert "Add the timer value wraparound processing to common wait processing"
...
This reverts commit cd8f65c94b
2014-12-11 18:21:43 +09:00
b75dadac6c
Merge pull request #779 from ndelisi/master
...
Y5Design LPC11U35 and NRF51822 - Add New targets
2014-12-11 08:28:29 +00:00
cd8f65c94b
Add the timer value wraparound processing to common wait processing
...
Timer value wraparound operation had not been considered in common wait process.
By defining the EXPIRE_US non-zero value, wraparound operation is enabled.
The EXPIRE_US will be define the value of each vender-specific.
If EXPIRE_US is 0, the common wait process is same as before.
2014-12-11 14:32:09 +09:00
c3393b80b1
Merge remote-tracking branch 'upstream/master' into iar_mbed
2014-12-10 13:41:46 +01:00
3062999e97
Separated the c data initialization and c++ to call mbed_sdk_init before c++ data. So that the c variables are updated before the c++ objects are initialized. Had to rename the cmain override in RTX_CM_lib.h to __iar_program_start because there can not be two __cmain overrides in the project. The ewps had to be updated to add the linker command --skip_dynamic_initialization which stalls the c++ data init until __iar_dynamic_initialization which is called right after mbed_sdk_init.
2014-12-10 13:40:17 +01:00
2e1ba4df65
Merge pull request #777 from GustavWi/iar_mbed
...
Targets: CMSIS - Fixed linker files for IAR (Ram size on one) and for the rest increased the heap...
2014-12-10 08:49:10 +00:00
91a77d74cf
With the old logic if Serial::writeable() was called before and/or used to block calls to Serial::putc() it would never write due to EVENT_TXDRDY trailing a write to TXD. Add a dummy write to TXD before pins are connected to the peripheral. This primes the EVENT_TXDRDY to lead future writes rather than trail. Since STOPTX isn't used this seems safe.
2014-12-09 17:48:10 -06:00
a03d3bcd8d
Porting of new target: Added new target to target.py, added header files for PinNames.h and device.h
...
nRF51822 from Nordic Semiconductor
Bluetooth Low-Energy v4.1 compliant - interface to smartphones, tablets
System-on-Chip (SoC) solution - easily transformable into a deployable solution
Drop-in solution for production - no need to design your own antenna
FCC and CE Certified
3x LEDs, 3x Buttons
Powered by interface board or external 3.3V
2014-12-09 14:08:22 -06:00
f382af4aed
Porting of new target: Added new target to target.py, added header files for PinNames.h and device.h. Added linker library.
...
Y5 Design LLC Interface Board
LPC11u35 from NXP
Low Power, ARM(r) Cortex-M0 suitable for a wide range of applications
On-Chip Bootloader - In-System programming (ISP) and in-application programming (IAP)
ROM-based USB drivers - Flash updates via USB supported
SPI, GPIO, i2C, UART, ADC
3x LEDs, Reset Button
3.3V powered via USB or external
USB interface - shipped with USB-A, male connector, pads for Micro female
2014-12-09 13:01:20 -06:00
490dd0ddfe
Fixed linker files (Ram size on one) and for the rest increased the heap and stack size
2014-12-09 18:37:01 +01:00
a36eb12b2f
Targets: Freescale KSDK - extern } syntax error fix
2014-12-09 14:52:17 +00:00
ea49132428
Merge pull request #770 from GustavWi/iar_mbed
...
Fix IAR serial fgets fgetc
Taken from PR #770 :
setbuf(_file, NULL), and std::setvbuf(_file,NULL,_IONBF,NULL) should both give an unbuffered stream (the data is directly written to the input buffer). IAR sets a buffer anyway of size 512 bytes for these calls. Calling setvbuff(_file,buf,_IONBF,NULL) with a buffer that is not a NULL pointer sets the buffer to size one. Which means that as soon as a char is read it is written to the real buffer. If people are interested in looking at this further they can look at the files under ARM/src/dlib: fgets.c, fflush.c, xfrpep.c and xfwprep.c
2014-12-09 14:39:13 +00:00
a96ad0576f
Merge pull request #760 from bcostm/master
...
Targets: NUCLEO_F072RB/F091RC - Remove the call to Systick
2014-12-09 14:31:45 +00:00
0f2b2cdf09
Merge pull request #762 from masaohamanaka/master
...
Targets: RZ_A1H - Fix some bugs about I2C, SPI, Interruptin and add terminal definition of user button.
2014-12-09 14:27:50 +00:00
75673df767
Merge pull request #772 from mbrudevoldlpd/master
...
Add support for mDot with STM32F411RE processor
2014-12-09 14:13:28 +00:00
35ba8d709f
Merge pull request #774 from Sissors/ksdk
...
Targets: K20D50M - Serial baudrate improvements / clk_freqs.h fix
2014-12-09 14:01:54 +00:00
bd6836396b
Moved IAR serial differences to retarget.cpp
2014-12-09 14:30:34 +01:00
a6c9b1c40b
[HAL][K20D50M] Serial baudrate improvements / clk_freqs.h fix
...
Three changes, first it fixes:
https://github.com/mbedmicro/mbed/issues/761 (which was reported
slightly wrong because K20 has again different clocking from KLXX for
uarts).
Second it adds mcgpllfll to clk_freqs, which again is different for K20
compared to KLXX .
Finally it adds the fractional baudrate divider for more accurate serial
baudrates.
2014-12-08 21:15:24 +01:00
2f5cbcb1c6
Add support for mDot with STM32F411RE processor
2014-12-08 10:58:25 -06:00
9909e7ca56
Fixed IAR serial fgets fgetc
2014-12-08 13:12:37 +01:00
0b512e5e6f
Change I2C driver transfer sequence
...
Change I2C driver transfer sequence to go according to H/W manual.
Changed contents are as below.
- Access procedure of ACTBT bit of MR3 register
- Issuance procedure of stop condition
2014-12-08 16:47:28 +09:00
fb0eb349dd
Merge pull request #766 from ohagendorf/reorg_hal_stm324
...
Targets: DISCO_F4xx - add PeripheralPins.c/.h
2014-12-08 07:25:11 +00:00
a17c1dd8f7
Merge pull request #767 from ohagendorf/nucleo_disco_coide
...
STM32xxx: CoIDE/gcc_arm exporter and startup_stm32xx update
2014-12-08 07:24:22 +00:00
48448527bd
Fix a bug that usticker wait interval is not constant.
...
When read the timer value, it have a potential to read abnormal value.
Because we used 16bit + 16bit cascade timer and read timer count separately.
Changed usticker timer from 16bit + 16bit cascade timer to 32bit timer to fix the bug.
2014-12-08 15:47:49 +09:00
86647d8387
[DISCO_F4xx] add PeripheralPins.c/.h
2014-12-07 22:25:38 +01:00
967046e1d6
[STM32xxx] gcc_arm startup files
...
Updates startup files to actual versions of STM32 Cube drivers without
any changes of STs drivers:
- DISCO_F303VC
- DISCO_F334
- NUCLEO_F030
- NUCLEO_F072
- NUCLEO_F302
- NUCLEO_F334
2014-12-07 20:52:49 +01:00
883b2bc0ce
[STM32xxx] CoIDE exporter and gcc_arm
...
- CoIDE options: wrap main and linker option DiscradUnusedSection=1 was
missing in some targets
- CoIDE options: corrected flash loader config for Nucleo_F030 and
Nucleo_F072
- CoIDE options: corrected memory layout (not used per default but now
it is the same as in linker script)
- gcc linker script: changed the memory size from hex number e.g. 0x2000
to decimal 8K
2014-12-07 20:07:56 +01:00
e2a8d32343
Add definition of User button(SW0 and SW1)
...
Add definition of User button for users.
2014-12-05 17:37:53 +09:00
4473a517a8
Fix some bugs that IRQ Edge Interrupt will not operation normal.
...
The bugs of IRQ Edge Interrupt as below.
- Not call a function that was registered in rise, always call a function that was registered in the fall.
- If there are multiple interrupt sources, there is a possibility that end the wrong interrupt processing.
2014-12-05 17:36:52 +09:00
a36c4462f2
Fix a bug that initialize setting of SPI clock value is not correct.
...
Modify the value as below.
uint16_t mask = 0x000c0; ->
uint16_t mask = 0x000c;
2014-12-05 17:35:49 +09:00
dca273e167
Fix a bug that I2C driver can not transfer of 1Byte/2Byte.
...
I2C driver was not considered about 1Byte/2Byte transfer.
Add 1Byte/2Byte transfer processing in I2C driver.
2014-12-05 17:31:22 +09:00
fe61d8c4f7
Fix a fear of bug that a static value will be indefiniteness.
...
There was a function that has the potential to be called with indefiniteness argument.
Modify to not call the function with indefiniteness argument.
2014-12-04 16:03:50 +09:00
7ea2016953
Fix a bug that I2C freq become fixed 100kHz
...
When I2C read/write, I2C freq ignores the setting of user and it become fixed 100kHz.
Implement change the freq according to the setting of user.
2014-12-04 15:40:38 +09:00
2b4edd572b
[NUCLEO_F091RC] Remove call to systick
2014-12-03 15:13:05 +01:00
7761378c39
[NUCLEO_F072RB] Remove call to systick
2014-12-03 15:11:58 +01:00
4d1fc24b2e
Merge pull request #757 from GustavWi/iar_mbed
...
RTOS: IAR support for M0, M0+ and M4
2014-12-03 13:07:25 +00:00
6210f92420
IAR RTOS support M0, M0+ and M4
2014-12-03 12:54:06 +01:00
da233f6e5e
Merge pull request #748 from modtronix-com/master
...
Targets: Fix GCC ARM linker script for STM32L1 (STM32L152XE)
2014-12-03 09:33:13 +00:00
74678ea0fc
Merge pull request #755 from masaohamanaka/master
...
Targets: RZ_A1H - Remove External Bus Controller settings
2014-12-03 08:01:27 +00:00
600af8d001
[LPC11XX_11CXX] Fix SPI slave issue
...
- Fix a bug reported here:
https://developer.mbed.org/questions/4872/SPISlave-Class-dosnt-work-on-LPC1114/
- Add IOCON settings to enable proper pin functions
- Remove non-busy check in slave_receive() function, since the SSP/SPI
is always in busy state when received a valid data according to the
device user manual
- Add bit mask in spi_slave_read() function
- Add TARGET_LPC1114 pin config in SPI_SLAVE test
- Tested with LPC11U24 SPI master and LPC1114 SPI slave
2014-12-03 14:49:23 +09:00
c26d902a4d
Remove External Bus Controller settings
...
GR-PEACH does not have any device that connected external address area of RZ_A1H.
The External Bus Controller settings are needless at GR-PEACH.
Terminals settings will be input mode(It is default setting).
2014-12-03 14:19:07 +09:00
a88eaace6b
Merge pull request #753 from dinau/update_disco_f051r8
...
Targets: DISCO_F051R8 - Updated driver files with HAL driver.
2014-12-02 15:36:15 +00:00
f6743c5b50
Merge pull request #751 from bcostm/master
...
Targets: NUCLEO_F303RE - Add new target
2014-12-02 15:35:46 +00:00
7442855e9c
Merge pull request #747 from masaohamanaka/master
...
Targets: RZ_A1H - Fixed I2C bug
2014-12-02 15:05:48 +00:00
990fc973b5
[DISCO_F051R8]Updated driver files with HAL driver.
2014-12-02 23:41:28 +09:00
c1caff2714
[NUCLEO_F303RE] Add target part 2 - hal
2014-12-02 07:50:07 +01:00
c1397c596f
[NUCLEO_F303RE] Add target part 1 - cmsis
2014-12-02 07:49:08 +01:00
27a9f11f8e
Implement peripheral clock determination process to I2C driver
...
When making I2C communication freq, we used a fix value 33.3MHz as peripheral clock as below.
pclk = 33333333 / (2 << count);
But it is not dynamic when system clock is changed.
So, implement peripheral clock determination process.
Peripheral clock will be decided by RZ-A1H system clock mode.
2014-12-01 20:09:11 +09:00
3a560efa49
Change comment to GCC scripts
...
Change comment to GCC scripts. All GCC linker scrips for STM32L1 have
space for BootRAM defined.
2014-12-01 11:55:43 +11:00
35efc5aaa1
Updated linker script to reserve space for BootRAM
...
Updated linker script to reserve space for BootRAM at 0x138
2014-12-01 11:47:24 +11:00
be30dcbb0b
Fixed GCC ARM linker script for STM32L1 (STM32L152XE.ld)
...
Fixed Flash and RAM definitions in GCC ARM linker script for STM32L1
(STM32L152XE.ld)
2014-11-29 08:31:53 +11:00
7290768dc6
Fix a unreadable comments.
...
There were some Japanese comments in I2C source code.
Fixed those comments to be readable.
2014-11-28 16:18:40 +09:00
2fbe5fa4b0
Merge branch 'ksdk' of github.com:Sissors/mbed into Sissors-ksdk
...
Conflicts:
libraries/USBDevice/USBDevice/USBEndpoints.h
libraries/USBDevice/USBDevice/USBHAL_KL25Z.cpp
2014-11-28 08:03:42 +01:00
1c4831a243
Fixed I2C bug
...
Modified the register settings of communication frequency .
2014-11-28 10:28:45 +09:00
10156c5006
[USBDevice] Fix for https://github.com/mbedmicro/mbed/issues/690
...
In the old K64F register .h file (same for K22F),
SIM_SOPT2_PLLFLLSEL_MASK was incorrectly set as a 1-bit field, like it
was in the KLXX devices, while it now is a 2-bit field. This has been
fixed in the current register maps, however the USB clock was set by
taking the entire mask, while only the first bit needs to be set.
This is now fixed by using the SHIFT definition, and should work also on
other Freescale targets (verified on K64, K22 and KL25)
2014-11-27 23:08:23 +01:00
e1d38422ed
Merge branch 'newbuild_lib_rev92'
2014-11-27 13:56:11 +00:00
8a3087825b
Merge pull request #744 from masaohamanaka/master
...
Targets: RZ_A1H - Fix RTOS build error (Cortex A)
2014-11-27 03:35:29 -08:00
84b6398edd
Merge pull request #742 from GustavWi/iar_mbed
...
Targets: IAR Fixed NVIC table in ram for stm targets
2014-11-27 03:33:50 -08:00
cf9fc3c4ac
Add SD function
...
Add SD function and tests for RZ_A1H.
2014-11-27 17:12:57 +09:00
495ba6d817
Fixed CMSIS-RTOS RTX build error.
...
Some files of CMSIS-RTOS RTX for CA9 has an effect on build error.
Confirmed those are unwanted files. Deleted.
2014-11-27 17:12:08 +09:00
1401e677dd
Merge pull request #743 from ohagendorf/linker_scripts
...
Targets: STM32F0, F3, F4, L053, L152 - GCC ARM linker script reorganisation
2014-11-26 23:42:34 -08:00
0f65920536
IAR Fixed NVIC table in ram for nucleo targets
2014-11-27 08:24:08 +01:00
e0d3730a55
[STM_Targets] linker file naming principle
2014-11-26 16:13:37 +01:00
939471cdbd
IAR Fixed NVIC table in ram for stm targets
2014-11-26 16:09:03 +01:00
2e3c02f121
[STM32L1xx] linker script reorganisation
2014-11-26 15:07:38 +01:00
80ddc6661d
[DISCO_F4xx][NUCLEO_F4xx] linker and startup script reorganisation
2014-11-26 14:29:52 +01:00
dda84e6c32
[STM32F03X][STM3207X] linker script reorganizatin
2014-11-26 13:48:58 +01:00
60a7d3755f
IAR Fixed NVIC RAM Vector space for NXP targets
2014-11-26 13:30:49 +01:00
087a8eab34
[STM32L053xx] linker script reorganisation
2014-11-26 13:15:09 +01:00
0737130e57
[STM32F3xx] linker script reorganisation
2014-11-26 12:31:02 +01:00
c3208fe6f4
Merge pull request #736 from GustavWi/iar_mbed
...
RTOS: IAR Export for CORTEX M3
2014-11-26 08:57:24 +01:00
d9a231862a
Merge pull request #733 from masaohamanaka/master
...
Targets: RZ_A1H - Modified Terminal setting for New GR-PEACH.
2014-11-26 08:53:06 +01:00
0d99a7d7ad
Delete old version terminal setting code.
...
We confirmed that user never use the old version GR-PEACH.
So, we deleted old version terminal setting code.
2014-11-26 13:44:01 +09:00
d8f6c47dde
Bumped build number
2014-11-25 13:48:38 +00:00
4e89d3c771
Merge pull request #739 from xiongyihui/master
...
Targets: ARCH_MAX & DISCO_F407VG - Add SystemCoreClockUpdate and HAL_Init to mbed_sdk_init
2014-11-25 12:30:32 +01:00
9bf1247ff9
[ARCH_MAX & DISCO_F407VG] add SystemCoreClockUpdate and HAL_Init to
...
mbed_sdk_init
HAL_Init is needed by Arch MAX to setup RTC with internal clock
2014-11-25 16:48:14 +08:00
d5afb47760
Merge pull request #711 from ohagendorf/_exit-or-exit
...
mbed: Name of exit function in exit.c for GCC ARM (_exit)
2014-11-25 08:21:11 +01:00
8c56483c43
[mbed][MTS_DRAGONFLY_F411RE] fix D2 pin mapping, remove PWM_OUT from PinNames.h
2014-11-24 11:30:37 -06:00
dbe1af7787
[cmsis][MTS_DRAGONFLY_F411RE] set USE_PLL_HSE_EXTC to 0, causing problems with IAR export and we have no external clock option
2014-11-24 09:43:18 -06:00
ea50eb3512
[NUCLEO_L053R8] Correct issue with Travis build
2014-11-24 16:20:26 +01:00
d03da0cd30
removed comments and fixed USB_RAM section
2014-11-24 14:28:08 +01:00
c2de05e882
Fixed LPC1768 NVIC placement space in RAM
2014-11-24 14:16:32 +01:00
53f92133dc
[NUCLEO_L0/L1] Add PeripheralPins files
2014-11-24 12:36:39 +01:00
afd167f734
[NUCLEO_F4] Add note on optional pins
2014-11-24 12:35:46 +01:00
04dc0c7a24
[NUCLEO_F3] Add PeripheralPins files
2014-11-24 12:34:35 +01:00
f62073e179
[NUCLEO_F103RB] Add PeripheralPins files
2014-11-24 12:33:15 +01:00
60e0d1431e
[NUCLEO_F0] Add PeripheralPins files
2014-11-24 12:32:02 +01:00
092828ce33
Added IAR Export RTOS CORTEX M3
2014-11-24 10:58:08 +01:00
814740f86e
Merge pull request #720 from bcostm/master
...
Targets: NUCLEOs - Improvement of gpio_irq hal
2014-11-24 08:15:36 +01:00
4d04aba235
[NUCLEO_F072RB] exporter for gcc and coide
2014-11-22 14:56:30 +01:00
caf42f946c
[NUCLEO_F030R8] exporter for gcc and coide
2014-11-22 12:18:31 +01:00
59f686bbc1
Modified Terminal setting for New GR-PEACH.
...
Modified Terminal setting of Ethernet and LED PIN for New GR-PEACH.
2014-11-21 13:47:46 +09:00
13b97774b8
[mbed][rtos][k22f] Add initial FRDM-K22F support
2014-11-20 22:21:25 -06:00
365df95cf6
[mbed][MTS_DRAGONFLY_F411RE] fix pin names for spi to external flash
2014-11-20 14:43:10 -06:00
4196364088
[mbed][MTS_DRAGONFLY_F411RE] change wrong PLL members to correct values from ST Cube code
2014-11-20 12:36:01 -06:00
bb4c5f4ab5
[mbed][MTS_DRAGONFLY_F411RE] remove unnecessary VIMPINNAMES file
2014-11-20 11:06:20 -06:00
ac11414116
[mbed][MTS_DRAGONFLY_F411RE] add RADIO_TX/RX pins, correct reversed TX/RX pins for uart6
2014-11-20 09:57:13 -06:00
ffab541ac9
[mbed][MTS_DRAGONFLY_F411RE] clean up PinNames.h
2014-11-20 07:52:48 -06:00
451914a276
[mbed][MTS_DRAGONFLY_F411RE] fix stdio uart decl, fix D3 pin decl, change blinky test main.cpp back to original
2014-11-20 07:43:42 -06:00
c6f0c3b14b
Revert "[NUCLEO_F103RB] update SystemCoreClock after changing clock settings"
2014-11-20 19:19:47 +08:00
3e1aac36e1
Correct pin names for serial rx/tx
2014-11-19 14:52:49 -06:00
f364b76d2f
Merge pull request #703 from masaohamanaka/master
...
Targets: RZ_A1H - Fixed a bug of serial interrupt
2014-11-19 00:59:43 -08:00
be10b27013
Merge branch 'ksdk' of github.com:Sissors/mbed into Sissors-ksdk
...
Conflicts:
libraries/USBDevice/USBDevice/USBEndpoints.h
libraries/USBDevice/USBDevice/USBHAL_KL25Z.cpp
2014-11-19 08:45:48 +00:00
dcfa675e50
Merge branch 'NUCLEO_L152RE_exporter' of github.com:ohagendorf/mbed into ohagendorf-NUCLEO_L152RE_exporter
...
Conflicts:
workspace_tools/build_travis.py
workspace_tools/export/coide.py
2014-11-19 08:43:14 +00:00
7ff3e68a96
Merge pull request #714 from ohagendorf/NUCLEO_F302R8_exporter_2
...
Tools: NUCLEO_F302R8 - exporters for gcc_arm and coide
2014-11-19 00:28:37 -08:00
5ad32eaa60
Merge pull request #715 from kshoji/nRF51822_serial_31250
...
Targets: nRF51822 - Add support for Serial 31250 baud (for legacy MIDI)
2014-11-19 00:26:52 -08:00
eadd2013c2
Merge pull request #719 from PrzemekWirkus/host-test-improvements-part-2
...
Tools: Host test plugin improvements, part 2: Copy plugins
2014-11-19 00:24:28 -08:00
12b3c601ea
Merge pull request #721 from GustavWi/iar_mbed
...
Tools: IAR export for some NXP Platforms
2014-11-19 00:23:12 -08:00
72e2d393a6
[NUCLEO_F103RB] update SystemCoreClock after changing clock settings
2014-11-19 13:51:12 +08:00
d05c1d4950
nrf51_bitfields.h reverted.
2014-11-19 14:47:01 +09:00
849c8742f0
IAR export LPC4088
2014-11-18 16:19:26 +01:00
299749f143
IAR export LPC810 + 812
2014-11-18 16:09:38 +01:00
82523de2c6
IAR export LPC1549
2014-11-18 16:01:34 +01:00
d13714fb07
IAR export for LPC11XX and 11CXX
2014-11-18 15:49:23 +01:00
b3656be310
Added IAR export for LPC11UXX
2014-11-18 14:54:40 +01:00
20177c912b
[NUCLEOs] Improvement of gpio_irq hal
...
Now it is possible to have multiple interrupt pins on EXTI vectors.
Example:
EXTI0 -> PA_0 or PB_0 or PC_0, ... only 1 pin
EXTI5_9 -> PA_5 and PA_6 and PB_7 and PC_8 and PC_9: up to 5 pins
EXTI10_15: PA_10 and PB_11 and PB_12, ... : up to 6 pins
2014-11-18 12:28:30 +01:00
34eccbf435
Merge pull request #716 from bcostm/master
...
Targets: NUCLEO_F4xx - Add PeripheralPins.c/h file
2014-11-18 02:15:57 -08:00
5311efaae6
Added IAR export for LPC11U68.
2014-11-18 11:15:49 +01:00
a210914f42
Fixed some function's bugs
...
Fixed some bugs and modified mmu setting.
Fixed functions as below
- analog in
- i2c
- interruptin
2014-11-18 13:54:39 +09:00
4a7fde6fa0
[USBDevice] Fix K20D50M name
...
Since it was initially K20D5M the name is still wrong in USBDevice. This
should fix it.
2014-11-17 18:08:37 +01:00
0e51149ecf
tcpclient test: cheanged the way we ask server for file content (we will now ask for full path, not relative one) so we avoid 'File moved' HTTP 301 return code.
2014-11-17 10:38:18 +00:00
ff85a88b7b
[NUCLEO_F4] Add PeripheralPins.c/h file
...
Move all pinouts into these 2 files.
2014-11-17 10:01:44 +01:00
3dcb6a5b25
nRF51822 - Add support for Serial 31250 baud (for Legacy MIDI)
2014-11-17 12:56:40 +09:00
42c20128a6
[NUCLEO_F302R8] exporters for gcc_arm and coide
...
Adds exporter for gcc_arm and coide for the NUCLEO_F302R8.
2014-11-16 18:24:57 +01:00
f37a45d3b5
Name of exit function in exit.c
...
Change the name of the exit function to _exit as suggested in clib
documenation for all gcc_arm toolchains (GCC_ARM and CoIDE)
2014-11-16 17:43:42 +01:00
5c36e9544f
[NUCLEO_L152RE] exporters for gcc_arm and coide
2014-11-16 17:10:47 +01:00
2e18da7419
[mbed][MTS_DRAGONFLY_F411RE] added platform support files and dirs built gcc executable NOT working
2014-11-14 11:29:46 -06:00
70d2f16ca3
Removed dependency to Standard library header <cstdint>
2014-11-14 17:17:26 +00:00
570c25d255
Merge pull request #705 from 0xc0170/fix_issue#704
...
Targets: K64F - UART_NUM fix in a condition
2014-11-14 07:46:28 -08:00
81254a0e44
K64F - UART_NUM fix in a condition
2014-11-14 15:21:39 +00:00
cde105eaa5
Fixed a bug of serial interrupt
...
I fixed a bug of serial interrupt as below.
Serial TX/RX interrupt was not occur when TX/RX end.
2014-11-14 21:20:46 +09:00
e53ae9e840
Merge pull request #700 from masaohamanaka/master
...
[RZ_A1H]Fixed a bug of CMSIS-RTOS RTX for Cortex-A9
2014-11-14 11:51:11 +00:00
ac6b5cb06b
[NUCLEO_F0] Align hal files
2014-11-14 11:01:47 +01:00
23761ee73e
[NUCLEO_F3] Align hal files
2014-11-14 11:00:10 +01:00
c05cb2e726
[NUCLEO_F4] Align hal files
2014-11-14 10:58:57 +01:00
7e735c41b6
Fixed CMSIS-RTOS RTX for Cortex-A9
...
I fixed a bug as below.
A bug occured in CMSIS-RTOS RTX for Cortex-A9 when the build option is -O3.
2014-11-14 18:30:53 +09:00
1cc251f8e2
Merge pull request #683 from PrzemekWirkus/cpputest-export
...
Tools: Update exporters' capabilities to support CppUTest project exports
2014-11-14 01:19:30 -08:00
67346ec8d6
Merge branch 'reorder_f3xx_2' of github.com:ohagendorf/mbed into ohagendorf-reorder_f3xx_2
...
Conflicts:
workspace_tools/export/coide.py
2014-11-14 08:56:20 +00:00
dffeedc96e
Merge pull request #695 from autopulated/testsforall
...
Targets: add USBTX and USBRX pin definitions for targets that don't provide them
2014-11-14 00:48:06 -08:00
b5ba59050b
Merge pull request #697 from bcostm/master
...
Targets: NUCLEOs - Style corrections in hal files (astyle)
2014-11-14 00:47:19 -08:00
32a7f019c0
Modify *.sct to shrink binary file more
2014-11-14 10:32:46 +09:00
60d5fb780e
Modify mmu setting, scatter, sf boot loader to shrink binary file
2014-11-14 09:01:34 +09:00
6d1da4ef47
[NUCLEO_L053R8] Typo corrections (astyle)
2014-11-13 16:46:25 +01:00
df479e409a
[NUCLEO_F411RE] Typo corrections (astyle)
2014-11-13 16:45:36 +01:00
40f3f7e27c
[NUCLEO_F401RE] Typo corrections (astyle)
2014-11-13 16:44:50 +01:00
307f641d14
[NUCLEO_F334R8] Typo corrections (astyle)
2014-11-13 16:44:05 +01:00
2fb9552913
[NUCLEO_F302R8] Typo corrections (astyle)
2014-11-13 16:43:09 +01:00
285977d068
[NUCLEO_F103RB] Typo corrections (astyle)
2014-11-13 16:42:32 +01:00
9d02d52994
[NUCLEO_F072RB] Typo corrections (astyle)
2014-11-13 16:41:28 +01:00
17e61f58d6
[NUCLEO_F030R8] Typo corrections (astyle)
2014-11-13 16:40:37 +01:00
fa2e957179
also add USBTX=USBRX=NC definitions for LPC13XX
2014-11-13 14:13:42 +00:00
69cd573545
add USBTX and USBRX pin definitions for targets that don't provide them (so that tests compile), but set to NC
2014-11-13 11:24:36 +00:00
08c85ef136
Merge pull request #680 from mbrudevoldlpd/master
...
Platform: Add support for MultiTech mDot module
2014-11-13 08:21:18 +00:00
ae8d818927
Rename mDot to mDot F405RG to allow for variation in processor
2014-11-12 16:21:13 -06:00
56af0e1621
[TARGET_DISCO_F303] reorder structure - part5
...
Add missing -Wl,--wrap,main linker option so that __wrap_main is called.
This function was ignored in gcc_arm and coide projects before.
2014-11-12 22:20:38 +01:00
52ac44b482
Move OS CLOCK rate to target define
2014-11-12 10:59:27 -06:00
dcaa34a9d6
Fix whitespace per coding standard
2014-11-12 10:16:29 -06:00
691f34097a
[TARGET_DISCO_F303] reorder structure part4
...
Remove change of wrong target and add it to the wright one. Additionally
changing the CoIDE template file to the correct mcu.
2014-11-12 14:31:57 +01:00
857d59a6c0
Added IAR export support for NUCLEO F103RB
2014-11-12 13:31:30 +01:00
6737282994
Merge pull request #679 from toyowata/master
...
Targets: LPC11U68 - Fix GPIO init for specific pins
2014-11-12 09:13:13 +00:00
dbd8b3bab4
Merge pull request #686 from GustavWi/iar_mbed
...
Toolchain: IAR - lpc1347 startup fix
2014-11-12 09:12:50 +00:00
6fd59778d6
Merge pull request #684 from Sissors/ksdk
...
Targets: KSDK - Fix ACK/NACK received inverted (issue #661 )
2014-11-12 08:45:48 +00:00
d3e2cacff3
[HAL][KSDK] Fixed ACK/NACK received inverted ( https://github.com/mbedmicro/mbed/issues/661 )
...
As reported by Geremia G
(http://developer.mbed.org/forum/bugs-suggestions/topic/5220/ )
2014-11-11 20:32:07 +01:00
7306211cb1
Aligned existing unit tests to new include structure. Now includes are in build/cpputest so no need to include like this: 'CppUTest/header_file.h'
2014-11-11 15:32:16 +00:00
77e847632e
Reverted Martin's changes related to CppUTest includes
2014-11-11 14:43:07 +00:00
f3ad604ebc
Fixed reset handler for LPC1347 IAR
2014-11-11 14:43:17 +01:00
c9ec513887
Merge pull request #677 from Sissors/ksdk
...
Targets: Freescale KSDK - Fix first serial char not being sent
2014-11-11 09:38:07 +00:00
e3d55f3d6f
Updates to support RTOS
2014-11-10 16:16:26 -06:00
3f5b4b39e2
Add support for uvision
2014-11-10 16:16:11 -06:00
ac7da3e5d8
Add support for GCC ARM
2014-11-10 16:16:06 -06:00
5d6ee64bf1
Support for MTS MDOT
2014-11-10 16:15:53 -06:00
8adfd82aa1
Merge pull request #673 from Wind0r/fix_lpc1768_repeatmode
...
Targets: LPC176X - Add repeater pinmode
2014-11-10 07:40:15 +00:00
59fa5437e3
Merge pull request #663 from bikeNomad/master
...
Ensure that IG (Global) bit is reset in MAC address for K64F and others
2014-11-10 07:37:52 +00:00
e24f5b642b
Merge pull request #662 from xiongyihui/nrf51822
...
Targets: NRF51822 - enable I/O mapping and peripheral dynamic assignment for I2C and SPI
2014-11-10 07:36:19 +00:00
b0a7a246c1
[LPC11U68] Fix GPIO init for specific pins
...
* Add GPIO initialization value for P0_12, P0_13 and P0_14 since default
mode for them are other than GPIO
* This issue reported here:
https://developer.mbed.org/questions/4874/Using-SPI-on-LPCXpresso11U68/
2014-11-10 14:01:59 +09:00
20212b8c6b
[TARGET_DISCO_F303] reorder structure - part 3
...
Update of mbed hal.
2014-11-10 00:12:40 +01:00
57a79c08a9
[HAL][KSDK] Fix first serial char not being sent
...
The K64F/K22F didn't send the first char. I don't know why exactly, but
any type of reading a status register seems to fix it. And this extra
line at least makes sense. Now it works correctly.
2014-11-09 19:40:29 +01:00
de1bb3af3a
Add repeater pinmode
2014-11-08 12:07:39 +01:00
aab52cb7ec
Merge pull request #669 from 0xc0170/fix_cpputest_testrunner
...
Tests: Fix cpputest testrunner
2014-11-07 15:31:22 +00:00
162eebcbda
[NUCLEO_L152RE] Remove old cmsis folder
2014-11-07 14:22:50 +01:00
1874247540
[NUCLEO_L152RE] Move cmsis files in STM32L1 folder
2014-11-07 14:21:16 +01:00
0780a16b8d
[STM32L1] Add new folder with STM32Cube inside
2014-11-07 14:20:04 +01:00
d00caad8c9
[HAL][NRF51822] enable I/O mapping and peripheral dynamic assignment for I2C and SPI
2014-11-07 19:24:34 +08:00
1c268fb25b
Tests: Testrunner - console variable name fix
...
It matches the cpputest from mbed mbed.org repository.
2014-11-07 10:24:57 +00:00
5c842943da
[NUCLEO_F0] Add missing files for IAR exporter
2014-11-07 09:24:57 +01:00
eec0be05cd
Merge pull request #660 from bcostm/master
...
Targets: STM32F0 - Factorisation of NUCLEO_F030R8/F072RB/F091RC cmsis folders
2014-11-07 08:13:40 +00:00
3e4e9ade0d
remove useless assert line
2014-11-07 09:42:35 +08:00
e6ae0a7e02
Ensure that IG (Global) bit is reset in MAC address for K64F and others
...
See IEE 802.3-2002, Section 3.2.3(b)
2014-11-06 09:48:32 -08:00
142ad22a2f
[RZ_A1H] Remove target-specific check from build system
2014-11-06 13:47:43 +00:00
45ddf10698
Proper fix for Cortex-M/Cortex-A RTOS issue
...
Created two new labels (CORTEX_A and CORTEX_M) that can be used to differentiate
between Cortex-A and Cortex-M code in the build system.
2014-11-06 12:54:09 +00:00
8724eb616b
Merge pull request #594 from tkuro-rel/master
...
[RZ/A1H] mbed-RZ first release
2014-11-06 10:54:58 +00:00
e449648cbc
[NUCLEO_F072RB] Update gpio/port structures
...
Needed due to the new STM32Cube version used.
2014-11-06 10:26:20 +01:00
d8e93f093f
[NUCLEO_F091RC] Remove old folder
2014-11-06 10:18:13 +01:00
383ad3cf78
[NUCLEO_F072RB] Remove old folder
2014-11-06 10:17:43 +01:00
01c416f19b
[NUCLEO_F030R8] Remove old folder
2014-11-06 10:17:03 +01:00
7fa58b4e27
[NUCLEO_F091RC] Move files in STM32F0 folder
2014-11-06 10:15:28 +01:00
a6d6f5c645
[NUCLEO_F072RB] Move files in STM32F0 folder
2014-11-06 10:14:36 +01:00
f0792715d1
[NUCLEO_F030R8] Move files in STM32F0 folder
2014-11-06 10:13:14 +01:00
7204fce6c7
[STM32F0] Add TARGET_STM32F0 folder
...
With STM32Cube inside.
2014-11-06 10:11:29 +01:00
073a7a0c6f
Merge pull request #657 from bcostm/master
...
Targets: STM32L0 - Cube driver release note
2014-11-06 08:41:05 +00:00
33a843cf93
Merge remote-tracking branch 'upstream/master'
...
Conflicts:
workspace_tools/targets.py
2014-11-06 16:19:35 +09:00
a7c3861d31
Merge branch 'master' of https://github.com/mbedmicro/mbed
2014-11-06 08:19:26 +01:00
e0c00cc4ee
[WALLBOT_BLE] Add new platform
...
* Add new platform Wallbot BLE
* Identical as nRF51822 target, but different pinout
2014-11-06 16:03:43 +09:00
bd79e23ed2
Fixed file header
...
Fixed copyright and correction of erroneous description.
2014-11-06 15:56:42 +09:00
b5103bd7b6
[RZ/A1H] (a measure devised to deal with a review.) * Some variables in USBHAL.h moved into USBHAL_RZ_A1H.cpp. * Some functions writing by c++ changed to macro function.
2014-11-06 14:44:38 +09:00
000698d043
[STM32L0] Cube driver release note
...
Go back to original html file found in the ST package. Finally the text
file is not practical. I will find another way to record the changes
made on this driver. Maybe an additional text file to add in the folder
?
2014-11-05 17:06:48 +01:00
45326db36d
Merge pull request #649 from rgrover/master
...
API: ticker casting fix (issue #649 )
2014-11-05 14:59:16 +00:00
cfeccf154f
Merge pull request #654 from bcostm/master
...
Exporters: STM32L053R8 - IAR exporter
2014-11-05 14:20:00 +00:00
79a3fdb1e2
[LPC824] Fix serial interrupt issues
...
Basically, this is same fix as
https://github.com/mbedmicro/mbed/pull/633
* Fix issue by handling interrupt type (TxIrq and RxIrq)
* ISR now correctly refers INTSTAT instead of STAT to get interrupt
cause
* Disable interrupt when updating vector table
* Tested by issue #616 test cases and serial_interrupt test
2014-11-05 22:35:35 +09:00
dd5e093d55
[NUCLEO_L053R8] Add IAR exporter
2014-11-05 10:42:44 +01:00
f0de488ad5
Merge branch 'master' of https://github.com/mbedmicro/mbed
2014-11-05 10:28:04 +01:00
abf66ba15f
[STM32L0] Replace NULL by HAL_NULL in STM32Cube driver for IAR
...
- Fix issue #482 for STM32L0 devices
- Change release note file in text format and add changes for mbed
2014-11-05 10:21:10 +01:00
bdc83f71d6
Merge pull request #650 from ohagendorf/reorder_f3xx
...
Targets: DISCO_F334 - Reorder f3xx
2014-11-05 00:46:52 -08:00
319724621d
[RZ/A1H] Deletes the tab codes
2014-11-05 15:13:38 +09:00
d517c2863b
[RZ/A1H] * Some fields for RZ/A1H changed as "private". * Some function moved into USBHAL_RZA1H.cpp. * Interrupts registration routine returned to the original sample code.
2014-11-05 14:25:11 +09:00
d61817a4c8
[TARGET_DISCO_F303] reorder structure - part2
...
Update of mbed hal.
2014-11-05 01:11:22 +01:00
0c3a635004
[TARGET_DISCO_F303] reorder structure - part1
...
Removing old hal and moving target specific files to new folder.
2014-11-04 17:21:32 +01:00
63cad2a60b
Potential fix for #646
2014-11-04 15:39:48 +00:00
c0adc9f3a9
[TARGET_DISCO_F334C8] reorder structure - part2
...
Removing cmsis files.
2014-11-04 16:23:29 +01:00
9362f706c8
[TARGET_DISCO_F334C8] reorder structure - part1
...
Moving targetspecific files to new folder in new structure
2014-11-04 16:22:38 +01:00
340effa2c7
[NUCLEO_L053R8] Update GPIO structures
...
Due to latest registers map file used.
2014-11-04 11:16:17 +01:00
1ad6757c9d
[STM32L0] Remove useless files
2014-11-04 11:13:51 +01:00
0f20cff47d
[STM32L0] Update registers map file
2014-11-04 11:13:20 +01:00
e9c0fd990f
[STM32L0] Update version in files, add Cube driver release note
2014-11-04 11:12:26 +01:00
5a868b18bc
Merge pull request #640 from bcostm/master
...
Targets: Factorisation of NUCLEO_F302R8 and F334R8 cmsis folders
2014-11-04 01:40:34 -08:00
8f7778d898
Merge pull request #639 from ohagendorf/bcostm_branch_f4xx_structure_reorder
...
Targets: Nucleo F4xx - Reorder f4xx structure
2014-11-04 01:29:29 -08:00
ff48c7994b
[TARGET_XXX_L053YY] filename - includename case missmatch
...
Changed include filename to a lower case l from higher case L because of
Windows-Linux incompatibility. Removed temporarly taget DISCO_F407VG
from build_travis so that Travis runs trough the build process.
2014-11-03 23:40:57 +01:00
b66ba7bef9
Remove previous NUCLEO_F334R8 folder
2014-11-03 14:20:21 +01:00
a1b2540633
Remove previous NUCLEO_F302R8 folder
2014-11-03 14:19:38 +01:00
11e5613d6d
Add NUCLEO_F334R8 specific files
2014-11-03 14:17:52 +01:00
263eff08f2
Add NUCLEO_F302R8 specific files
2014-11-03 14:16:45 +01:00
f18bc70c98
Add TARGET_STM32F3 folder with STM32Cube driver
2014-11-03 14:14:13 +01:00
835736bd23
Merge pull request #637 from rgrover/master
...
Target: NUCLEO_F103RB - removing some un-used variables
2014-11-03 02:54:33 -08:00
dadc3ea8f1
Merge branch 'rework_cmsis_stm32l0' of github.com:ohagendorf/mbed into ohagendorf-rework_cmsis_stm32l0
2014-11-03 10:32:32 +00:00
02478cd1f2
Merge pull request #633 from toyowata/master
...
Target: LPC1549 - Fix serial interrupt issues (issue report #616 )
2014-11-03 02:21:15 -08:00
b3d9ff9430
Merge pull request #631 from ohagendorf/target_disco_f334c8
...
Platform: DISCO_F334C8 addition
2014-11-03 02:18:32 -08:00
417f470ba9
Merge pull request #630 from bcostm/master
...
Targets: Factorisation of NUCLEO_F401RE and F411RE cmsis folders
2014-11-03 02:08:33 -08:00
f46cb59b8e
Fixed the startup_LPC11xx.s files in ARM Micro and ARM STD - they had wrong memory size;
...
to this: __initial_sp EQU 0x10001800 ; Top of RAM from LPC11U
from this: __initial_sp EQU 0x10002000 ; Top of RAM from LPC11U
2014-11-03 09:55:48 +00:00
c66f1b1955
[NUCLEO_F334R8] rtos support added
...
Added rtos support.
2014-11-03 09:55:44 +00:00
bb2a0c17d2
[NUCLEO_F334R8] Add IAR exporter
2014-11-03 09:55:40 +00:00
fd3b27b327
white space diffs.
2014-11-03 08:56:31 +00:00
fa0a82d695
remove un-unsed variables.
...
Getting rid of some compiler warnings.
2014-11-03 08:53:16 +00:00
022838af31
Reorganisation of NUCLEO_L053R8 and DISCO_L053C8 cmsis folders - part4
...
Moves cmsis files to new location.
2014-11-02 23:28:54 +01:00
bd046b3f67
Reorganisation of NUCLEO_L053R8 and DISCO_L053C8 cmsis folders - part3
...
Moves target/toolchain specific files to new location
2014-11-02 23:28:09 +01:00
f77569bc2a
Reorganisation of NUCLEO_L053R8 and DISCO_L053C8 cmsis folders - part2
...
Deletes cmsis files of nucleo_l053c8
2014-11-02 23:26:26 +01:00
3138b98e71
Reorganisation of NUCLEO_L053R8 and DISCO_L053C8 cmsis folders - part1
...
Delete cmsis files of disco_l053c8
2014-11-02 23:23:44 +01:00
ad4a0ea53a
[LPC1549] Fix serial interrupt issues
...
* Fix USART2 base address offset
* Fix issue by handling interrupt type (TxIqr and RxIrq)
* ISR now correctly refers INTSTAT instead of STAT to get interrupt
cause
* Disable interupt when update vector table
* Tested by issue #616 test cases and serial_interrupt test
2014-11-02 14:10:43 +09:00
24e3754428
[TARGET_STM32F4] new structure for F407 and F429 targets - part4
...
Solves the problem NULL -> HAL_NULL for the additional hw blocks in the
larger mcus.
For F401 and F411 this was already solved in #596 .
2014-11-01 13:07:25 +01:00
fd835e6c93
[TARGET_STM32F4] new structure for F407 and F429 targets - part3
...
remove target_stm32f429zi files
2014-10-31 23:18:46 +01:00
b989a33f6f
[TARGET_STM32F4] new structure for F407 and F429 targets - part2
...
remove target_stm32f407vg files
2014-10-31 23:18:00 +01:00
e2b33c9bdd
[TARGET_STM32F4] new structure for F407 and F429 targets -part1
...
move specific files from old position into new target folders under
target_stm32f4
2014-10-31 23:15:13 +01:00
86c54a26af
[DISCO_F334C8] new target incl. rtos support
...
New target as a copy of nucleo_f334 with changes/additions in pin and
rtos definitions.
2014-10-31 18:14:23 +01:00
22989238d0
Remove misplaced F411RE folder
2014-10-31 16:22:17 +01:00
2a29a24114
Remove misplaced F401RE folder
2014-10-31 16:21:48 +01:00
2fdc494f41
Put NUCLEO_F411RE specific files
2014-10-31 16:20:41 +01:00
255460b8d6
Put NUCLEO_F401RE specific files
2014-10-31 16:19:59 +01:00
836a1e2552
Add TARGET_STM32F4 folder with STM32Cube driver inside
2014-10-31 16:18:18 +01:00
261455bba2
Merge pull request #627 from ohagendorf/rtos_nucleo_f334
...
RTOS: NUCLEO_F334R8 - rtos addition
2014-10-31 07:00:15 -07:00
e7e9dd54eb
Merge pull request #625 from bcostm/master
...
Toolchain: NUCLEO_F334R8 - support for IAR
2014-10-31 06:40:49 -07:00
23987f6df7
[NUCLEO_F334R8] rtos support added
...
Added rtos support.
2014-10-31 14:39:53 +01:00
159e424dfa
Merge pull request #624 from ohagendorf/exporter_gccarm_disco_l053
...
Toolchain: DISCO_L053C8, NUCLEO_L053R8 - GCC ARM support
2014-10-31 06:32:48 -07:00
6a705fdadd
Merge pull request #623 from GustavWi/iar_mbed
...
Tools: IAR export to Kinetis targets
2014-10-31 06:17:44 -07:00
5bc736defc
[NUCLEO_F334R8] Add IAR exporter
2014-10-31 13:40:36 +01:00
0afdcd751e
[NUCLEO_L053R8][EXPORT] gcc_arm
2014-10-31 13:34:43 +01:00
037cf1fa2e
Added flash config to IAR startup files for FREESCALE targets
2014-10-31 13:15:59 +01:00
07b49da75e
Merge pull request #617 from rosterloh/stm320l-support
...
Targets: DISCO_L053C8 - new platform - STM32L0 Discovery board
2014-10-31 03:59:59 -07:00
760052d983
Merge pull request #581 from hchanon/FRDM-K64F_FOPT_EzPort_Bit_Inverted
...
Targets: FRDM-K64F - Fix FOPT EzPort bit documentation and set it to disable
2014-10-31 03:51:16 -07:00
9a8a75e827
Add Ethernet functionality
...
Although the Ethernet functionality is not for review.
2014-10-31 17:01:59 +09:00
1d489bc298
Added support for the STM32L0 Discovery board
2014-10-30 21:11:36 +00:00
92f654f525
Added IAR export support for K64F
2014-10-30 19:07:44 +01:00
5c5d1d3ed5
Added IAR export support for K22F
2014-10-30 18:29:24 +01:00
bd7ca62d01
Added IAR export KL46Z
2014-10-30 14:23:27 +01:00
2a2efd5d84
Added Iar support for KL05Z
2014-10-30 12:38:53 +01:00
22bf9b3a0a
IAR support for KL25Z
2014-10-30 12:23:34 +01:00
c3bfa3406c
Added support for target K20D50M
2014-10-30 10:29:12 +01:00
9586b1b00a
Merge pull request #618 from bcostm/master
...
Targets: NUCLEO_F334R8 - Update STM32Cube driver
2014-10-30 02:08:26 -07:00
d48844320b
[NUCLEO_F334R8] Update STM32Cube driver
...
- Same version as in NUCLEO_F302R8
- Fix issue #482 (IAR compilation)
- Compliant with mbed RTOS (Systick no more used)
2014-10-29 16:16:55 +01:00
5a47ce92d4
Merge pull request #613 from bcostm/master
...
Tools: Exporters - IAR exporter for NUCLEO_F302R8
2014-10-29 07:19:34 -07:00
f60c1161b9
Merge pull request #611 from GustavWi/iar_mbed
...
Tools: STM32F407 - IAR export
2014-10-29 07:03:36 -07:00
4c9d52ad41
Merge pull request #602 from lawm/master
...
RTOS: Nucleo STM32F302R8 additiion
2014-10-29 06:54:21 -07:00
a94eb663dc
API: mbed header file - mbed lib revision - 91
2014-10-29 10:54:57 +00:00
fcd3ac25dc
Fixed the nRF51-Dongle support
2014-10-29 11:07:04 +02:00
e8b0bd2a2e
[RZ/A1H] Deletes debugging prints. Expands the stacks and heap. Deletes the illegal memory access
2014-10-29 15:52:30 +09:00
3f32994343
Revert "Deleted the debug print and the illegal memory access."
...
This reverts commit 6aaae4a8af
2014-10-29 15:09:33 +09:00
697dfddc34
Merge remote-tracking branch 'origin/master'
2014-10-29 14:41:29 +09:00
6aaae4a8af
Deleted the debug print and the illegal memory access.
2014-10-29 14:38:13 +09:00
b8809b3e14
Merge remote-tracking branch 'upstream/master'
2014-10-29 13:24:46 +09:00
a52058eb75
[RZ/A1H] Revert a macro line
2014-10-29 10:38:49 +09:00
823e012597
API: mbed header file - mbed lib revision - 90
2014-10-28 16:28:17 +00:00
62fcd83b23
Test MBED_A19: wrong I2C pins assigned to TARGET_LPC11U68 target because of leading TARGET_FF_ARDUINO
2014-10-28 13:22:25 +00:00
1005539f17
[NUCLEO_F302R8] Add IAR exporter
2014-10-28 10:17:38 +01:00
ed8196566f
IAR export STM32F407
2014-10-27 17:23:06 +01:00
fa97ec3098
[NUCLEO_F401RE] Update STM32Cube driver
...
Same version as in NUCLEO_F411RE.
2014-10-27 09:54:26 +01:00
e2dedfde94
Merge pull request #605 from Cheong2K/master
...
HAL: RBLAB_BLENANO - Fix PinNames.h for the BLE Nano board.
2014-10-27 01:00:01 -07:00
f37b32e66c
Merge pull request #600 from rgrover/master
...
HAL: NRF51822_DONGLE - PinNames and device header files
2014-10-27 00:55:45 -07:00
a84b2c75a6
Fixed PinNames.h for the BLE Nano board.
2014-10-27 13:58:24 +08:00
f39ea2e5cd
[LPC824] I2C ROMAPI/bitrate related fix
...
- I2C did not work as ROMAPI initialization override CFG register settings at i2c_init()
- i2c_frequency() ignored bitrate settings
2014-10-26 17:38:14 +09:00
0d27304410
add RTOS support for Nucleo STM32F302R8
2014-10-24 15:18:25 -07:00
f039906de8
renaming the target to NRF51822_DONGLE
2014-10-24 17:16:45 +01:00
d136331597
preparing for the USB DONGLE platform from Nordic
2014-10-24 15:56:09 +01:00
462a657337
[RZ/A1H] Supports the CDC of USB Function
2014-10-24 18:07:52 +09:00
b5cd75cd56
[RZ/A1H] updates iodefine.h
2014-10-24 18:06:26 +09:00
8087cf1600
Revert "Supports the CDC of USB function"
...
This reverts commit c713db88e8
2014-10-24 17:51:38 +09:00
c48829330c
HAL [LPC824] Fix multi channel I2C issue
...
- Update resource count value which did not count up during multiple
channel I2C resources are used
2014-10-24 17:47:00 +09:00
c713db88e8
Supports the CDC of USB function
2014-10-24 17:20:55 +09:00
3dfb033226
Merge pull request #593 from en129/forLPC824
...
Toolchain: LPC824 - new Toolchain support by GCC_ARM for LPC824
2014-10-24 09:12:56 +01:00
cff29fd8d8
[RZ/A1H] first release - change InterruptManager.cpp for CA9
...
RZ/A1H has GIC instead of NVIC. InterruptManger assumes
NVIC only, so temporarily ifdef guarded in order to pass
the compilation.
2014-10-24 11:46:02 +09:00
55ddb7f85c
[RZ/A1H] fixs scatter file
...
There was two sections for sflash which lead to
separate output .bin file. Fixed.
2014-10-24 11:46:01 +09:00
b024a3dfda
[RZ/A1H] commit for RTOS changes
...
- adds RTX-CA related files
- changes Thread.cpp for CA9
- adds GR-PEACH entry to README.md
2014-10-24 11:46:01 +09:00
9ddce12aa6
[RZ/A1H] commit for HAL changes
...
- adds GPIO driver
- adds I2C driver
- adds SPI driver
- adds PWM driver
- adds serial driver (irq not supported)
- adds ticker driver
- add analogin driver
2014-10-24 11:46:01 +09:00
193bdaa8c9
[RZ/A1H] commit for CMSIS changes
...
- adds CA9 related headers
- adds start up routine (only ARMCC is supported)
- adds scatter file for RZ/A1H
- adds GIC driver
- adds peripheral definitions(iodefine) for RZ/A1H
- adds serial flash boot loader for RZ/A1H
2014-10-24 11:46:01 +09:00
728a815b31
Merge pull request #595 from bcostm/master
...
Tools: NUCLEO_F411RE - Corrections in IAR icf and ewp.tmpl files
2014-10-23 14:48:12 +01:00
41104fb49d
[NUCLEO_F411RE] Wrong RAM end in icf file
2014-10-23 14:43:05 +02:00
ced81866e0
Update system_LPC8xx.c
...
Move to code line 341 to 349.
2014-10-23 19:18:53 +09:00
b6014ecfa2
[NUCLEO_F411RE] Corrections in IAR icf and ewp.tmpl files
2014-10-23 11:35:44 +02:00
6ff7dfe464
Merge pull request #589 from molejar/dev-freescale-kl43z
...
Target: Freescale FRDM-KL43Z addition
2014-10-23 09:37:40 +01:00
851f137f92
Add to GCC_ARM LPC824
...
first commit
2014-10-23 15:51:09 +09:00
af083d2773
Added support of KL43Z into RTX
2014-10-22 19:37:40 +02:00
08d90dc0bf
Merge pull request #579 from bagbag/master
...
[USB] STM32F401RE - USBDevice support addition
2014-10-22 08:38:54 +01:00
ba7a631c3d
Merge branch 'master' into dev-freescale-kl43z
2014-10-21 23:14:39 +02:00
2d0e67cf6e
Added IAR Toolchain support for device LPC1347
2014-10-21 16:07:39 +01:00
4880f5375f
Added linker and startup file
2014-10-21 16:06:56 +01:00
de35d0c84e
fix for the case where there are multiple tickers firing at nearly the same time
2014-10-20 09:49:28 +01:00
53ec8ba932
Merge pull request #582 from ohagendorf/disco_f429zi
...
CMSIS/HAL: DISCO_F429ZI - correction of RAM memory layout in the linker script and stdio_uart config
2014-10-20 09:00:25 +01:00
c19ebe6e65
Merge pull request #580 from Accutechs/master
...
Platform: SSCI824 - New platform addition (LPC82X)
2014-10-20 08:58:38 +01:00
996e49964c
Merge pull request #552 from Sissors/master
...
API: Timer - start() behavior (bug)fix
2014-10-20 08:38:09 +01:00
ced22a359b
Merge pull request #554 from sg-/cmsis_nvic_license
...
CMSIS: BSD license to NVIC_SetVector and NVIC_GetVector.
2014-10-20 08:33:19 +01:00
254e57d4b2
[DISCO_F429ZI] fix of RAM memory layout and stdio_uart
...
All test without any peripherals ("peripherals": []) are OK with these
two corrections.
- RAM start address was wrong - overlap with interrupt vector table
- wrong uart for stdio uart
2014-10-20 01:36:45 +02:00
8020b647fe
[FRDM-K64F] Fix FOPT EzPort bit documentation and set it to disable at start-up to
...
allow proper booting when powered from the K64F USB port. Refer to issue (#569 ).
2014-10-19 15:45:37 -04:00
9155d4204b
[SSCI824] Add platform
2014-10-19 22:49:16 +09:00
d15d6b33e5
added USBDevice support for STM32F401RE
2014-10-19 14:34:50 +02:00
185ce5bfe4
Fixed LPUART and USB device initialization issue. Added _kill, _exit and _getpid functions required by gcc-arm-none-eabi-4.8 toolchain.
2014-10-17 22:20:12 +02:00
eaed52a5aa
In tests NET_1 and NET_7 changed URL to files from mbed.org to developer.mbed.org. Reason: online IDE was moved to developer subdomain and NET1 and NET-7 tests were failing
2014-10-17 15:59:36 +01:00
74cc430faa
Merge pull request #574 from rgrover/master
...
updating to v7.1.0 of the Nordic soft-device.
2014-10-17 14:03:14 +01:00
53e1cdc34d
Merge pull request #575 from toyowata/master
...
HAL : LPC824 - Fix SPI1 SWM table
2014-10-17 14:45:44 +02:00
03482e329d
HAL : [LPC824] Fix SPI1 SWM table
...
- Fix SPI ch1 switch matrix table value - detected by SPI_MASTER test
case
- Add LPC824 pinout for some test cases
- [LPC824] spi_api.c code refactoring
2014-10-17 19:16:37 +09:00
1993a8d343
mostly white space diffs; and line endings
2014-10-17 11:13:36 +01:00
0c651617eb
Add v7.1.0 of the Nordic softdevice.
...
This is necessary in order to utilize the additional 16KB of SRAM in the updated nRF51822.
2014-10-17 10:55:12 +01:00
028bbfafbc
[NUCLEO_F091RC] Minor change in pin definition
...
There is no PWM on PB_3 for this device.
2014-10-17 09:27:58 +02:00
36a8882a54
Merge pull request #566 from bcostm/master
...
Targets: NUCLEO_L152RE - Migration to STM32Cube driver (CMSIS and HAL)
2014-10-16 15:47:15 +02:00
96df6839f3
Merge pull request #567 from 0xc0170/fix_stm32f407_nucleo_folder
...
HAL: STM32F407VG - removal of nucleo folder caused by commit 8df74cfcda
2014-10-16 14:38:33 +01:00
a40d0bb4ca
Merge pull request #560 from dbestm/master
...
Targets: NUCLEO_F411RE - CMSIS files to build/export to IAR
2014-10-16 15:28:43 +02:00
4e1bd0b388
STDIO_UART_xx in peripheralnames.h
2014-10-16 09:12:20 +02:00
d5d23b1703
HAL: STM32F407VG - removal of nucleo folder caused by commit 8df74cfcda
2014-10-16 08:57:14 +02:00
aa43cb95b8
[NUCLEO_L152RE] Migration to STM32Cube driver
2014-10-16 08:48:34 +02:00
b25f2cf128
[STM32F407VG] add uARM toolchain for ARCH_MAX and DISCO_F407VG
2014-10-16 10:11:18 +08:00
42442233de
Added new test MBED_34 to check two tickers with two detached alternately callbacks
2014-10-15 17:45:54 +01:00
3cc3193445
[NUCLEO_F411RE] Adapt python script + CMSIS files to build/export to IAR
2014-10-15 15:00:35 +02:00
d9479288a7
HAL : [LPC824] Fix I2C return value
...
- Add LPC824 target for I2C test cases
- Fix I2C read/write return value bug, detected by I2C_MMA7660 test case
2014-10-15 17:46:21 +09:00
5d17b81123
Merge pull request #550 from sg-/k64_uuid_mac
...
HAL: K64F - mbed_mac_address implementation
2014-10-15 08:12:32 +02:00
98faa3f908
Added USB Device support for KL43Z
2014-10-15 01:34:00 +02:00
4151ca0e98
Added LPUART support and fixed a many errors in KL43Z target
2014-10-15 01:02:32 +02:00
d9c19847be
[cmsis_nvic] correct typos and stray character
2014-10-14 00:47:53 -05:00
ecf04d3782
Merge pull request #558 from toyowata/master
...
HAL: [LPC1549, LPC11U68] Add RTC support
2014-10-13 15:01:02 +01:00
77c1102c0f
Merge pull request #556 from ohagendorf/Nucleo_F334R8
...
Exporters: NUCLEO_F334R8 - export to gcc_arm and coide (templates, travis addition)
2014-10-13 15:28:06 +02:00
288dfb8e5f
[LPC1549, LPC11U68] Add RTC support
...
- Add RTC API support
2014-10-13 22:20:41 +09:00
0c3d6305af
[LPC824] Add correct SPI delay value
...
- Move SPI delay setting from set_frequency() to spi_init()
- Set correct value for PRE_DELAY field
- Tested with mbed Application Shield
2014-10-13 17:45:34 +09:00
07722e70ce
adding pinmap definition for the smart-beacon-kit
2014-10-13 08:34:51 +01:00
342790b0c3
Merge pull request #544 from ohagendorf/DISCO_F429_2
...
HAL: Disco_F429ZI - extensions of interrupt vectors, pin names and pin functions
2014-10-13 08:57:52 +02:00
18b494b682
Merge pull request #551 from sg-/enet_status
...
Net: K64F - Add phy_link_status() to link status in emac driver
2014-10-13 08:09:08 +02:00
1f9586daac
Added spi_api.c and gcc_arm_kl43z.tmpl files. Fixed some issues in KL43Z target
2014-10-13 00:49:48 +02:00
3b9fd11ee3
Merge branch 'gcc4nucleo_f334' into Nucleo_F334R8
...
Conflicts:
workspace_tools/export/gccarm.py
workspace_tools/export_test.py
2014-10-12 19:09:31 +02:00
262f9cff89
Add HAL for Freescale KL43Z
2014-10-11 20:40:12 +02:00
5b8ab1762d
Add BSD license to NVIC_SetVector and NVIC_GetVector.
2014-10-10 15:56:16 -05:00
6cc89ef5e8
[DISCO_F429ZI] added a description why there are commented pwm config lines
...
Some text to explain the commented pwm pin config. Remove some Timer5
based pwm config.
The Timer5 lines are not allowed as pwm configs because the timer is
used by the us_ticker as mentioned at the start of the block. I've
overseen to remove these lines.
2014-10-10 21:48:20 +02:00
3af1e6597b
[net][k64f] Add access to link status in emac driver
2014-10-10 14:29:43 -05:00
0ea849e7ff
[API] Timer-start behavior (bug)fix
...
Only start the timer when it is not running currently. In old behavior
the current slice-time was discarded, now multiple starts have no
effect.
2014-10-10 21:25:09 +02:00
b97938d3ad
Merge pull request #548 from Cheong2K/master
...
HAL: BLE Nano - pin corrections for the BLE Nano board (D0-D7)
2014-10-10 09:42:59 +02:00
68f9b5e847
Clean up and fixes.
2014-10-10 15:27:46 +08:00
02c6b49f14
Adjusted pin assignment for the BLE Nano board.
2014-10-10 14:30:06 +08:00
5c55c54a2c
[HAL][ARCH_MAX] add pin names - D14 and D15
2014-10-10 11:21:02 +08:00
94581919bd
Added CMSIS files for Freescale KL43Z ARM
2014-10-10 00:55:15 +02:00
79e2ebfc7b
[DISCO_F429ZI] changed mcu names
...
Changed mcu names in comments from original F407 ot F429.
2014-10-09 20:20:12 +02:00
dde65d84a0
Merge pull request #543 from dbestm/master
...
CMSIS: NUCLEO_F401RE - ARM GCC ld RAM size correction
2014-10-09 10:06:01 +01:00
8d52e5439f
[NUCLEO_F401RE] enhance gcc ld file
2014-10-09 10:43:39 +02:00
b5a4c8e803
Merge pull request #534 from anpilog/master
...
HAL: nrf51822 - Few fixes for PWM and Serial
2014-10-09 08:08:13 +01:00
8b3e1c2fa8
Merge pull request #541 from dbestm/master
...
HAL: NUCLEO_F030R8 - port HAL to support Cube and cube files addition
2014-10-08 12:47:21 +01:00
8df74cfcda
[NUCLEO_F030R8] port HAL to support cube and ad cube files as well
2014-10-08 11:24:16 +02:00
f256f79b63
[DISCO_F429ZZI] pin function definition
...
Added mostly all pin function (ADC, I2C, SPI, UART, PWM).
The basis of the target was DISCO_F407. The 429 has some additional pin
functions which are added with this commit. Also ports, pins and pin
functions of the larger packages are added not only the available of the
F429ZI package.
2014-10-08 10:41:06 +02:00
2c00ff11de
Merge pull request #537 from xiongyihui/stm32f407
...
HAL: DISC_F407VG, ARCH_MAX - change default toolchain
- ARCH_MAX - use different PeriheralNames.h files
2014-10-08 08:55:24 +01:00
5098e3b480
[HAL][ARCH_MAX] use different PeripheralNames.h for STDIO_UART
2014-10-08 15:40:18 +08:00
7a32e539fb
[NUCLEO_F091RC] pin_mode for Serial only if the pin is present
...
Same as all other targets.
2014-10-08 08:50:05 +02:00
3bd868408b
[K64F] Add mbed_mac_address implementation
2014-10-07 17:41:39 -05:00
70b576d1b3
[DISCO_F429ZI] missing interrupt vectors
...
Added some missing F429 interrupt vectors
2014-10-07 18:34:44 +02:00
ab92decf23
Marco add for new target DFCM_NNN40
2014-10-07 17:59:57 +08:00
46e37048a8
Merge pull request #535 from bcostm/dev_F091RC
...
Platform: New platform addition - NUCLEO_F091RC
2014-10-07 09:23:49 +01:00
6fd2118f1d
[NUCLEO_F091RC] First commit of CMSIS files
2014-10-06 16:33:16 +02:00
294db2502e
[NUCLEO_F091RC] First commit of HAL files
2014-10-06 16:08:56 +02:00
a156b0f4f2
Merge branch 'DISCO_F429' of git://github.com/ohagendorf/mbed into ohagendorf-DISCO_F429
...
Conflicts:
workspace_tools/export/gccarm.py
2014-10-06 14:33:21 +01:00
ff83792d52
Fix NRF51822 PWM and Serial:
...
- imlement pwmout_free()
- check UART interrupt type carefully
- implement serial_set_flow_control()
- add serial_clear() stub
2014-10-06 20:17:51 +08:00
6d6dd0be3a
Merge pull request #530 from Sissors/master
...
HAL: Allow Serial pin to be NC for all targets
2014-10-06 11:38:36 +01:00
1b833cbd67
Changed serial pin_mode with brackets and for all targets
2014-10-06 12:15:24 +02:00
9028a2a577
Merge pull request #533 from Cheong2K/master
...
Added RedBearLab BLE Nano board.
2014-10-06 02:58:56 -07:00
067f2b6eb8
Merge pull request #511 from pbrook/usbserial-fix
...
Fix USB serial RX bug
2014-10-06 02:48:40 -07:00
b30176a071
Merge pull request #531 from toyowata/master
...
Platform: LPC824 - new platform addition
2014-10-06 09:53:12 +01:00
ohagendorf
bcostm
Martin Kojtal
kazu-zamasu
Adam Green
Per Kristian Gjermshus
albert361
Masao Hamanaka
Toyomasa Watarai
Przemek Wirkus
Martin Olejar
mazgch
Yihui Xiong
Mike Fiore
Rohit Grover
vincent rabbit
Richard Osterloh
GustavWi
sg-
Nick DeLisi
Sissors
Michael Brudevold
dinau
modtronix-com
Bogdan Marinescu
kshoji
Bogdan Marinescu
James Crosby
Wind0r
Ned Konz
Takayuki Kurosawa
AMANUMA Kazuhisa
Aron L. Phillips
Mihail Stoyanov
Cheong2K
K4zuki
Lawrence M
en129
hmc
ytsuboi
bagbag
dbestm
Cheong
Marcomissyou
Andrii Anpilogov