ARMmbed
/
mbed-os
mirror of https://github.com/ARMmbed/mbed-os.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity

[NUCLEO_F303RE] Add target part 2 - hal

pull/751/head
bcostm 2014-12-02 07:50:07 +01:00
parent c1397c596f
commit c1caff2714
22 changed files with 3689 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

89
libraries/mbed/targets/hal/TARGET_STM/TARGET_NUCLEO_F303RE/PeripheralNames.h Normal file
View File

@ -0,0 +1,89 @@
/* mbed Microcontroller Library
*******************************************************************************
* Copyright (c) 2014, STMicroelectronics
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************
*/
#ifndef MBED_PERIPHERALNAMES_H
#define MBED_PERIPHERALNAMES_H
#include "cmsis.h"
#ifdef __cplusplus
extern "C" {
#endif
typedef enum {
ADC_1 = (int)ADC1_BASE,
ADC_2 = (int)ADC2_BASE,
ADC_3 = (int)ADC3_BASE,
ADC_4 = (int)ADC4_BASE
} ADCName;
typedef enum {
DAC_1 = (int)DAC_BASE
} DACName;
typedef enum {
UART_1 = (int)USART1_BASE,
UART_2 = (int)USART2_BASE,
UART_3 = (int)USART3_BASE,
UART_4 = (int)UART4_BASE,
UART_5 = (int)UART5_BASE
} UARTName;
#define STDIO_UART_TX PA_2
#define STDIO_UART_RX PA_3
#define STDIO_UART UART_2
typedef enum {
SPI_1 = (int)SPI1_BASE,
SPI_2 = (int)SPI2_BASE,
SPI_3 = (int)SPI3_BASE
} SPIName;
typedef enum {
I2C_1 = (int)I2C1_BASE,
I2C_2 = (int)I2C2_BASE,
I2C_3 = (int)I2C3_BASE
} I2CName;
typedef enum {
PWM_1 = (int)TIM1_BASE,
PWM_2 = (int)TIM2_BASE,
PWM_3 = (int)TIM3_BASE,
PWM_4 = (int)TIM4_BASE,
PWM_8 = (int)TIM8_BASE,
PWM_15 = (int)TIM15_BASE,
PWM_16 = (int)TIM16_BASE,
PWM_17 = (int)TIM17_BASE
} PWMName;
#ifdef __cplusplus
}
#endif
#endif

263
libraries/mbed/targets/hal/TARGET_STM/TARGET_NUCLEO_F303RE/PeripheralPins.c Normal file
View File

@ -0,0 +1,263 @@
/* mbed Microcontroller Library
*******************************************************************************
* Copyright (c) 2014, STMicroelectronics
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************
*/
#include "PeripheralPins.h"
// =====
// Note: Commented lines are alternative possibilities which are not used per default.
// If you change them, you will have also to modify the corresponding xxx_api.c file
// for pwmout, analogin, analogout, ...
// =====
//*** ADC ***
const PinMap PinMap_ADC[] = {
{PA_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN1 - ARDUINO A0
{PA_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN2 - ARDUINO A1
{PA_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN3
{PA_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN4
{PA_4, ADC_2, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC2_IN1 - ARDUINO A2
{PA_5, ADC_2, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC2_IN2 - Warning: LED1 is connected on this pin
{PA_6, ADC_2, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC2_IN3
{PA_7, ADC_2, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC2_IN4
{PB_0, ADC_3, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC3_IN12 - ARDUINO A3
{PB_1, ADC_3, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC3_IN1
{PB_2, ADC_2, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC2_IN12
{PB_11, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC12_IN14
{PB_12, ADC_4, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC4_IN3
{PB_13, ADC_3, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC3_IN5
{PB_14, ADC_4, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC4_IN4
{PB_15, ADC_4, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC4_IN5
{PC_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC12_IN6 - ARDUINO A5
{PC_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC12_IN7 - ARDUINO A4
{PC_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC12_IN8
{PC_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC12_IN9
{PC_4, ADC_2, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC2_IN5
{PC_5, ADC_2, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC2_IN11
{NC, NC, 0}
};
//*** DAC ***
const PinMap PinMap_DAC[] = {
{PA_4, DAC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // DAC_OUT1
{PA_5, DAC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // DAC_OUT2 - Warning: LED1 is connected on this pin
{NC, NC, 0}
};
//*** I2C ***
const PinMap PinMap_I2C_SDA[] = {
{PA_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
{PA_14, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
{PB_5, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF8_I2C3)},
{PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
{PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
{PC_9, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF3_I2C3)},
{PF_0, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
{NC, NC, 0}
};
const PinMap PinMap_I2C_SCL[] = {
{PA_8, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF3_I2C3)},
{PA_9, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
{PA_15, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
{PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
{PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
{PF_1, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
{NC, NC, 0}
};
//*** PWM ***
// TIM2 cannot be used because already used by the us_ticker
const PinMap PinMap_PWM[] = {
// {PA_0, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH1
// {PA_1, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH2
{PA_1, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM15)}, // TIM15_CH1N
{PA_2, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM15)}, // TIM15_CH1
{PA_3, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM15)}, // TIM15_CH2
{PA_4, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH2
// {PA_5, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH1 - Warning: LED1 is connected on this pin
{PA_6, PWM_16, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16)}, // TIM16_CH1
// {PA_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH1
{PA_7, PWM_17, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM17)}, // TIM17_CH1 - ARDUINO
// {PA_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH2
// {PA_7, PWM_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8)}, // TIM8_CH1N
// {PA_7, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1)}, // TIM1_CH1N - ARDUINO
{PA_8, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1)}, // TIM1_CH1
{PA_9, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1)}, // TIM1_CH2
// {PA_9, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM2)}, // TIM2_CH3
{PA_10, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1)}, // TIM1_CH3
// {PA_10, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM2)}, // TIM2_CH4
{PA_11, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_TIM1)}, // TIM1_CH4
// {PA_11, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1)}, // TIM1_CH1N
// {PA_11, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM4)}, // TIM4_CH1
{PA_12, PWM_16, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16)}, // TIM16_CH1
// {PA_12, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1)}, // TIM1_CH2N
// {PA_12, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM4)}, // TIM4_CH2
{PA_13, PWM_16, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16)}, // TIM16_CH1N
// {PA_13, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM4)}, // TIM4_CH3
{PA_14, PWM_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM8)}, // TIM8_CH2
// {PA_15, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH1
{PA_15, PWM_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM8)}, // TIM8_CH1
// {PB_0, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH3
// {PB_0, PWM_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8)}, // TIM8_CH2N
{PB_0, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1)}, // TIM1_CH2N
// {PB_1, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH4
// {PB_1, PWM_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8)}, // TIM8_CH3N
{PB_1, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1)}, // TIM1_CH3N
// {PB_3, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH2 - ARDUINO --> USED BY TIMER
{PB_3, PWM_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8)}, // TIM8_CH1N - ARDUINO
{PB_4, PWM_16, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16)}, // TIM16_CH1 - ARDUINO
// {PB_4, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH1
// {PB_4, PWM_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8)}, // TIM8_CH2N
// {PB_5, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH2
// {PB_5, PWM_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8)}, // TIM8_CH3N
{PB_5, PWM_17, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM17)},// TIM17_CH1
{PB_6, PWM_16, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16)}, // TIM16_CH1N - ARDUINO
// {PB_6, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH1
// {PB_6, PWM_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM8)}, // TIM8_CH1
{PB_7, PWM_17, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM17)}, // TIM17_CH1N
// {PB_7, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH2
// {PB_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM3)}, // TIM3_CH4
{PB_8, PWM_16, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16)}, // TIM16_CH1
// {PB_8, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH3
// {PB_8, PWM_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM8)}, // TIM8_CH2
{PB_9, PWM_17, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM17)}, // TIM17_CH1
// {PB_9, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH4
// {PB_9, PWM_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM8)}, // TIM8_CH3
// {PB_10, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH3 - ARDUINO --> USED BY TIMER
// {PB_11, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH4
{PB_13, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1)}, // TIM1_CH1N
{PB_14, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15)}, // TIM15_CH1
// {PB_14, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1)}, // TIM1_CH2N
{PB_15, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15)}, // TIM15_CH2
// {PB_15, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM15)}, // TIM15_CH1N
// {PB_15, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM1)}, // TIM1_CH3N
{PC_0, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH1
{PC_1, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH2
{PC_2, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH3
{PC_3, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH4
{PC_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH1
// {PC_6, PWM_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8)}, // TIM8_CH1
{PC_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH2
// {PC_7, PWM_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8)}, // TIM8_CH2
{PC_8, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH3
// {PC_8, PWM_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8)}, // TIM8_CH3
{PC_9, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH4
// {PC_9, PWM_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8)}, // TIM8_CH4
{PC_10, PWM_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8)}, // TIM8_CH1N
{PC_11, PWM_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8)}, // TIM8_CH2N
{PC_12, PWM_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8)}, // TIM8_CH3N
{PC_13, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM1)}, // TIM1_CH1N
{PF_0, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1)}, // TIM1_CH3N
{NC, NC, 0}
};
//*** SERIAL ***
const PinMap PinMap_UART_TX[] = {
{PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
{PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
{PA_14, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
{PB_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
{PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
{PB_9, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
{PB_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
{PC_4, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
// {PC_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
{PC_10, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_UART4)},
{PC_12, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_UART5)},
{NC, NC, 0}
};
const PinMap PinMap_UART_RX[] = {
{PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
{PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
{PA_15, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
{PB_4, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
{PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
{PB_8, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
{PB_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
{PC_5, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
// {PC_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
{PC_11, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_UART4)},
{PD_2, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_UART5)},
{NC, NC, 0}
};
//*** SPI ***
const PinMap PinMap_SPI_MOSI[] = {
{PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
{PA_11, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
// {PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
{PB_5, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
{PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
{PC_12, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
{NC, NC, 0}
};
const PinMap PinMap_SPI_MISO[] = {
{PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
{PA_10, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
// {PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
{PB_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
{PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
{PC_11, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
{NC, NC, 0}
};
const PinMap PinMap_SPI_SCLK[] = {
{PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // Warning: LED1 is connected on this pin
// {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
{PB_3, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
{PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
{PC_10, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
{PF_1, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
{NC, NC, 0}
};
const PinMap PinMap_SPI_SSEL[] = {
// {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
{PA_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
// {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
{PA_15, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
{PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
{PF_0, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
{NC, NC, 0}
};

66
libraries/mbed/targets/hal/TARGET_STM/TARGET_NUCLEO_F303RE/PeripheralPins.h Normal file
View File

@ -0,0 +1,66 @@
/* mbed Microcontroller Library
*******************************************************************************
* Copyright (c) 2014, STMicroelectronics
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************
*/
#ifndef MBED_PERIPHERALPINS_H
#define MBED_PERIPHERALPINS_H
#include "pinmap.h"
#include "PeripheralNames.h"
//*** ADC ***
extern const PinMap PinMap_ADC[];
//*** DAC ***
extern const PinMap PinMap_DAC[];
//*** I2C ***
extern const PinMap PinMap_I2C_SDA[];
extern const PinMap PinMap_I2C_SCL[];
//*** PWM ***
extern const PinMap PinMap_PWM[];
//*** SERIAL ***
extern const PinMap PinMap_UART_TX[];
extern const PinMap PinMap_UART_RX[];
//*** SPI ***
extern const PinMap PinMap_SPI_MOSI[];
extern const PinMap PinMap_SPI_MISO[];
extern const PinMap PinMap_SPI_SCLK[];
extern const PinMap PinMap_SPI_SSEL[];
#endif

183
libraries/mbed/targets/hal/TARGET_STM/TARGET_NUCLEO_F303RE/PinNames.h Normal file
View File

@ -0,0 +1,183 @@
/* mbed Microcontroller Library
*******************************************************************************
* Copyright (c) 2014, STMicroelectronics
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************
*/
#ifndef MBED_PINNAMES_H
#define MBED_PINNAMES_H
#include "cmsis.h"
#ifdef __cplusplus
extern "C" {
#endif
// See stm32f3xx_hal_gpio.h and stm32f3xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM) << 7) | ((PUPD) << 4) | ((MODE) << 0)))
#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
#define STM_MODE_INPUT (0)
#define STM_MODE_OUTPUT_PP (1)
#define STM_MODE_OUTPUT_OD (2)
#define STM_MODE_AF_PP (3)
#define STM_MODE_AF_OD (4)
#define STM_MODE_ANALOG (5)
#define STM_MODE_IT_RISING (6)
#define STM_MODE_IT_FALLING (7)
#define STM_MODE_IT_RISING_FALLING (8)
#define STM_MODE_EVT_RISING (9)
#define STM_MODE_EVT_FALLING (10)
#define STM_MODE_EVT_RISING_FALLING (11)
#define STM_MODE_IT_EVT_RESET (12)
// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
// Low nibble = pin number
#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
#define STM_PIN(X) ((uint32_t)(X) & 0xF)
typedef enum {
PIN_INPUT,
PIN_OUTPUT
} PinDirection;
typedef enum {
PA_0 = 0x00,
PA_1 = 0x01,
PA_2 = 0x02,
PA_3 = 0x03,
PA_4 = 0x04,
PA_5 = 0x05,
PA_6 = 0x06,
PA_7 = 0x07,
PA_8 = 0x08,
PA_9 = 0x09,
PA_10 = 0x0A,
PA_11 = 0x0B,
PA_12 = 0x0C,
PA_13 = 0x0D,
PA_14 = 0x0E,
PA_15 = 0x0F,
PB_0 = 0x10,
PB_1 = 0x11,
PB_2 = 0x12,
PB_3 = 0x13,
PB_4 = 0x14,
PB_5 = 0x15,
PB_6 = 0x16,
PB_7 = 0x17,
PB_8 = 0x18,
PB_9 = 0x19,
PB_10 = 0x1A,
PB_11 = 0x1B,
PB_12 = 0x1C,
PB_13 = 0x1D,
PB_14 = 0x1E,
PB_15 = 0x1F,
PC_0 = 0x20,
PC_1 = 0x21,
PC_2 = 0x22,
PC_3 = 0x23,
PC_4 = 0x24,
PC_5 = 0x25,
PC_6 = 0x26,
PC_7 = 0x27,
PC_8 = 0x28,
PC_9 = 0x29,
PC_10 = 0x2A,
PC_11 = 0x2B,
PC_12 = 0x2C,
PC_13 = 0x2D,
PC_14 = 0x2E,
PC_15 = 0x2F,
PD_2 = 0x32,
PF_0 = 0x50,
PF_1 = 0x51,
// Arduino connector namings
A0 = PA_0,
A1 = PA_1,
A2 = PA_4,
A3 = PB_0,
A4 = PC_1,
A5 = PC_0,
D0 = PA_3,
D1 = PA_2,
D2 = PA_10,
D3 = PB_3,
D4 = PB_5,
D5 = PB_4,
D6 = PB_10,
D7 = PA_8,
D8 = PA_9,
D9 = PC_7,
D10 = PB_6,
D11 = PA_7,
D12 = PA_6,
D13 = PA_5,
D14 = PB_9,
D15 = PB_8,
// Generic signals namings
LED1 = PA_5,
LED2 = PA_5,
LED3 = PA_5,
LED4 = PA_5,
USER_BUTTON = PC_13,
SERIAL_TX = PA_2,
SERIAL_RX = PA_3,
USBTX = PA_2,
USBRX = PA_3,
I2C_SCL = PB_8,
I2C_SDA = PB_9,
SPI_MOSI = PA_7,
SPI_MISO = PA_6,
SPI_SCK = PA_5,
SPI_CS = PB_6,
PWM_OUT = PB_4,
// Not connected
NC = (int)0xFFFFFFFF
} PinName;
typedef enum {
PullNone = 0,
PullUp = 1,
PullDown = 2,
OpenDrain = 3,
PullDefault = PullNone
} PinMode;
#ifdef __cplusplus
}
#endif
#endif

48
libraries/mbed/targets/hal/TARGET_STM/TARGET_NUCLEO_F303RE/PortNames.h Normal file
View File

@ -0,0 +1,48 @@
/* mbed Microcontroller Library
*******************************************************************************
* Copyright (c) 2014, STMicroelectronics
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************
*/
#ifndef MBED_PORTNAMES_H
#define MBED_PORTNAMES_H
#ifdef __cplusplus
extern "C" {
#endif
typedef enum {
PortA = 0,
PortB = 1,
PortC = 2,
PortD = 3,
PortF = 5
} PortName;
#ifdef __cplusplus
}
#endif
#endif

205
libraries/mbed/targets/hal/TARGET_STM/TARGET_NUCLEO_F303RE/analogin_api.c Normal file
View File

@ -0,0 +1,205 @@
/* mbed Microcontroller Library
* Copyright (c) 2014, STMicroelectronics
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include "mbed_assert.h"
#include "analogin_api.h"
#if DEVICE_ANALOGIN
#include "wait_api.h"
#include "cmsis.h"
#include "pinmap.h"
#include "PeripheralPins.h"
ADC_HandleTypeDef AdcHandle;
int adc1_inited = 0;
int adc2_inited = 0;
int adc3_inited = 0;
int adc4_inited = 0;
void analogin_init(analogin_t *obj, PinName pin)
{
// Get the peripheral name from the pin and assign it to the object
obj->adc = (ADCName)pinmap_peripheral(pin, PinMap_ADC);
MBED_ASSERT(obj->adc != (ADCName)NC);
// Configure GPIO
pinmap_pinout(pin, PinMap_ADC);
// Save pin number for the read function
obj->pin = pin;
// The ADC initialization is done only once for each ADC
if ((adc1_inited == 0) || (adc2_inited == 0) || (adc3_inited == 0) || (adc4_inited == 0)) {
if (obj->adc == ADC_1) {
__ADC12_CLK_ENABLE();
adc1_inited = 1;
}
if (obj->adc == ADC_2) {
__ADC12_CLK_ENABLE();
adc2_inited = 1;
}
if (obj->adc == ADC_3) {
__ADC34_CLK_ENABLE();
adc3_inited = 1;
}
if (obj->adc == ADC_4) {
__ADC34_CLK_ENABLE();
adc4_inited = 1;
}
// Configure ADC
AdcHandle.Instance = (ADC_TypeDef *)(obj->adc);
AdcHandle.Init.ClockPrescaler = ADC_CLOCKPRESCALER_PCLK_DIV2;
AdcHandle.Init.Resolution = ADC_RESOLUTION12b;
AdcHandle.Init.DataAlign = ADC_DATAALIGN_RIGHT;
AdcHandle.Init.ScanConvMode = DISABLE;
AdcHandle.Init.EOCSelection = DISABLE;
AdcHandle.Init.LowPowerAutoWait = DISABLE;
AdcHandle.Init.ContinuousConvMode = DISABLE;
AdcHandle.Init.NbrOfConversion = 1;
AdcHandle.Init.DiscontinuousConvMode = DISABLE;
AdcHandle.Init.NbrOfDiscConversion = 0;
AdcHandle.Init.ExternalTrigConv = ADC_EXTERNALTRIGCONV_T1_CC1;
AdcHandle.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
AdcHandle.Init.DMAContinuousRequests = DISABLE;
AdcHandle.Init.Overrun = OVR_DATA_OVERWRITTEN;
HAL_ADC_Init(&AdcHandle);
}
}
static inline uint16_t adc_read(analogin_t *obj)
{
ADC_ChannelConfTypeDef sConfig;
AdcHandle.Instance = (ADC_TypeDef *)(obj->adc);
// Configure ADC channel
sConfig.Rank = ADC_REGULAR_RANK_1;
sConfig.SamplingTime = ADC_SAMPLETIME_19CYCLES_5;
sConfig.SingleDiff = ADC_SINGLE_ENDED;
sConfig.OffsetNumber = ADC_OFFSET_NONE;
sConfig.Offset = 0;
switch (obj->pin) {
case PA_0:
sConfig.Channel = ADC_CHANNEL_1;
break;
case PA_1:
sConfig.Channel = ADC_CHANNEL_2;
break;
case PA_2:
sConfig.Channel = ADC_CHANNEL_3;
break;
case PA_3:
sConfig.Channel = ADC_CHANNEL_4;
break;
case PA_4:
sConfig.Channel = ADC_CHANNEL_1;
break;
case PA_5:
sConfig.Channel = ADC_CHANNEL_2;
break;
case PA_6:
sConfig.Channel = ADC_CHANNEL_3;
break;
case PA_7:
sConfig.Channel = ADC_CHANNEL_4;
break;
case PB_0:
sConfig.Channel = ADC_CHANNEL_12;
break;
case PB_1:
sConfig.Channel = ADC_CHANNEL_1;
break;
case PB_2:
sConfig.Channel = ADC_CHANNEL_12;
break;
case PB_11:
sConfig.Channel = ADC_CHANNEL_14;
break;
case PB_12:
sConfig.Channel = ADC_CHANNEL_3;
break;
case PB_13:
sConfig.Channel = ADC_CHANNEL_5;
break;
case PB_14:
sConfig.Channel = ADC_CHANNEL_4;
break;
case PB_15:
sConfig.Channel = ADC_CHANNEL_5;
break;
case PC_0:
sConfig.Channel = ADC_CHANNEL_6;
break;
case PC_1:
sConfig.Channel = ADC_CHANNEL_7;
break;
case PC_2:
sConfig.Channel = ADC_CHANNEL_8;
break;
case PC_3:
sConfig.Channel = ADC_CHANNEL_9;
break;
case PC_4:
sConfig.Channel = ADC_CHANNEL_5;
break;
case PC_5:
sConfig.Channel = ADC_CHANNEL_11;
break;
default:
return 0;
}
HAL_ADC_ConfigChannel(&AdcHandle, &sConfig);
HAL_ADC_Start(&AdcHandle); // Start conversion
// Wait end of conversion and get value
if (HAL_ADC_PollForConversion(&AdcHandle, 10) == HAL_OK) {
return (HAL_ADC_GetValue(&AdcHandle));
} else {
return 0;
}
}
uint16_t analogin_read_u16(analogin_t *obj)
{
uint16_t value = adc_read(obj);
// 12-bit to 16-bit conversion
value = ((value << 4) & (uint16_t)0xFFF0) | ((value >> 8) & (uint16_t)0x000F);
return value;
}
float analogin_read(analogin_t *obj)
{
uint16_t value = adc_read(obj);
return (float)value * (1.0f / (float)0xFFF); // 12 bits range
}
#endif

153
libraries/mbed/targets/hal/TARGET_STM/TARGET_NUCLEO_F303RE/analogout_api.c Normal file
View File

@ -0,0 +1,153 @@
/* mbed Microcontroller Library
* Copyright (c) 2014, STMicroelectronics
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include "mbed_assert.h"
#include "analogout_api.h"
#if DEVICE_ANALOGOUT
#include "cmsis.h"
#include "pinmap.h"
#include "mbed_error.h"
#include "PeripheralPins.h"
#define DAC_RANGE (0xFFF) // 12 bits
static DAC_HandleTypeDef DacHandle;
// These variables are used for the "free" function
static int pa4_used = 0;
static int pa5_used = 0;
void analogout_init(dac_t *obj, PinName pin)
{
DAC_ChannelConfTypeDef sConfig;
// Get the peripheral name from the pin and assign it to the object
obj->dac = (DACName)pinmap_peripheral(pin, PinMap_DAC);
MBED_ASSERT(obj->dac != (DACName)NC);
// Configure GPIO
pinmap_pinout(pin, PinMap_DAC);
// Save the pin for future use
obj->pin = pin;
// Enable DAC clock
__DAC1_CLK_ENABLE();
// Configure DAC
DacHandle.Instance = (DAC_TypeDef *)(obj->dac);
sConfig.DAC_Trigger = DAC_TRIGGER_NONE;
sConfig.DAC_OutputBuffer = DAC_OUTPUTBUFFER_DISABLE;
if (pin == PA_4) {
HAL_DAC_ConfigChannel(&DacHandle, &sConfig, DAC_CHANNEL_1);
pa4_used = 1;
}
if (pin == PA_5) {
HAL_DAC_ConfigChannel(&DacHandle, &sConfig, DAC_CHANNEL_2);
pa5_used = 1;
}
analogout_write_u16(obj, 0);
}
void analogout_free(dac_t *obj)
{
// Reset DAC and disable clock
if (obj->pin == PA_4) pa4_used = 0;
if (obj->pin == PA_5) pa5_used = 0;
if ((pa4_used == 0) && (pa5_used == 0)) {
__DAC1_FORCE_RESET();
__DAC1_RELEASE_RESET();
__DAC1_CLK_DISABLE();
}
// Configure GPIO
pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
}
static inline void dac_write(dac_t *obj, uint16_t value)
{
if (obj->pin == PA_4) {
HAL_DAC_SetValue(&DacHandle, DAC_CHANNEL_1, DAC_ALIGN_12B_R, value);
HAL_DAC_Start(&DacHandle, DAC_CHANNEL_1);
}
if (obj->pin == PA_5) {
HAL_DAC_SetValue(&DacHandle, DAC_CHANNEL_2, DAC_ALIGN_12B_R, value);
HAL_DAC_Start(&DacHandle, DAC_CHANNEL_2);
}
}
static inline int dac_read(dac_t *obj)
{
if (obj->pin == PA_4) {
return (int)HAL_DAC_GetValue(&DacHandle, DAC_CHANNEL_1);
} else if (obj->pin == PA_5) {
return (int)HAL_DAC_GetValue(&DacHandle, DAC_CHANNEL_2);
} else {
return 0;
}
}
void analogout_write(dac_t *obj, float value)
{
if (value < 0.0f) {
dac_write(obj, 0); // Min value
} else if (value > 1.0f) {
dac_write(obj, (uint16_t)DAC_RANGE); // Max value
} else {
dac_write(obj, (uint16_t)(value * (float)DAC_RANGE));
}
}
void analogout_write_u16(dac_t *obj, uint16_t value)
{
if (value > (uint16_t)DAC_RANGE) {
dac_write(obj, (uint16_t)DAC_RANGE); // Max value
} else {
dac_write(obj, value);
}
}
float analogout_read(dac_t *obj)
{
uint32_t value = dac_read(obj);
return (float)((float)value * (1.0f / (float)DAC_RANGE));
}
uint16_t analogout_read_u16(dac_t *obj)
{
return (uint16_t)dac_read(obj);
}
#endif // DEVICE_ANALOGOUT

70
libraries/mbed/targets/hal/TARGET_STM/TARGET_NUCLEO_F303RE/device.h Normal file
View File

@ -0,0 +1,70 @@
/* mbed Microcontroller Library
*******************************************************************************
* Copyright (c) 2014, STMicroelectronics
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************
*/
#ifndef MBED_DEVICE_H
#define MBED_DEVICE_H
#define DEVICE_PORTIN 1
#define DEVICE_PORTOUT 1
#define DEVICE_PORTINOUT 1
#define DEVICE_INTERRUPTIN 1
#define DEVICE_ANALOGIN 1
#define DEVICE_ANALOGOUT 1
#define DEVICE_SERIAL 1
#define DEVICE_I2C 1
#define DEVICE_I2CSLAVE 1
#define DEVICE_SPI 1
#define DEVICE_SPISLAVE 1
#define DEVICE_RTC 1
#define DEVICE_PWMOUT 1
#define DEVICE_SLEEP 1
//=======================================
#define DEVICE_SEMIHOST 0
#define DEVICE_LOCALFILESYSTEM 0
#define DEVICE_ID_LENGTH 24
#define DEVICE_DEBUG_AWARENESS 0
#define DEVICE_STDIO_MESSAGES 1
#define DEVICE_ERROR_RED 0
#include "objects.h"
#endif

79
libraries/mbed/targets/hal/TARGET_STM/TARGET_NUCLEO_F303RE/gpio_api.c Normal file
View File

@ -0,0 +1,79 @@
/* mbed Microcontroller Library
*******************************************************************************
* Copyright (c) 2014, STMicroelectronics
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************
*/
#include "mbed_assert.h"
#include "gpio_api.h"
#include "pinmap.h"
#include "mbed_error.h"
extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
uint32_t gpio_set(PinName pin)
{
MBED_ASSERT(pin != (PinName)NC);
pin_function(pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
return (uint32_t)(1 << ((uint32_t)pin & 0xF)); // Return the pin mask
}
void gpio_init(gpio_t *obj, PinName pin)
{
obj->pin = pin;
if (pin == (PinName)NC) {
return;
}
uint32_t port_index = STM_PORT(pin);
// Enable GPIO clock
uint32_t gpio_add = Set_GPIO_Clock(port_index);
GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
// Fill GPIO object structure for future use
obj->mask = gpio_set(pin);
obj->reg_in = &gpio->IDR;
obj->reg_set = &gpio->BSRRL;
obj->reg_clr = &gpio->BSRRH;
}
void gpio_mode(gpio_t *obj, PinMode mode)
{
pin_mode(obj->pin, mode);
}
void gpio_dir(gpio_t *obj, PinDirection direction)
{
MBED_ASSERT(obj->pin != (PinName)NC);
if (direction == PIN_OUTPUT) {
pin_function(obj->pin, STM_PIN_DATA(STM_MODE_OUTPUT_PP, GPIO_NOPULL, 0));
} else { // PIN_INPUT
pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
}
}

332
libraries/mbed/targets/hal/TARGET_STM/TARGET_NUCLEO_F303RE/gpio_irq_api.c Normal file
View File

@ -0,0 +1,332 @@
/* mbed Microcontroller Library
*******************************************************************************
* Copyright (c) 2014, STMicroelectronics
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************
*/
#include <stddef.h>
#include "cmsis.h"
#include "gpio_irq_api.h"
#include "pinmap.h"
#include "mbed_error.h"
#define EDGE_NONE (0)
#define EDGE_RISE (1)
#define EDGE_FALL (2)
#define EDGE_BOTH (3)
// Number of EXTI irq vectors (EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5_9, EXTI10_15)
#define CHANNEL_NUM (7)
// Max pins for one line (max with EXTI10_15)
#define MAX_PIN_LINE (6)
typedef struct gpio_channel {
uint32_t pin_mask; // bitmask representing which pins are configured for receiving interrupts
uint32_t channel_ids[MAX_PIN_LINE]; // mbed "gpio_irq_t gpio_irq" field of instance
uint32_t channel_gpio[MAX_PIN_LINE]; // base address of gpio port group
uint32_t channel_pin[MAX_PIN_LINE]; // pin number in port group
} gpio_channel_t;
static gpio_channel_t channels[CHANNEL_NUM] = {
{.pin_mask = 0},
{.pin_mask = 0},
{.pin_mask = 0},
{.pin_mask = 0},
{.pin_mask = 0},
{.pin_mask = 0},
{.pin_mask = 0}
};
// Used to return the index for channels array.
static uint32_t pin_base_nr[16] = {
// EXTI0
0, // pin 0
// EXTI1
0, // pin 1
// EXTI2
0, // pin 2
// EXTI3
0, // pin 3
// EXTI4
0, // pin 4
// EXTI5_9
0, // pin 5
1, // pin 6
2, // pin 7
3, // pin 8
4, // pin 9
// EXTI10_15
0, // pin 10
1, // pin 11
2, // pin 12
3, // pin 13
4, // pin 14
5 // pin 15
};
static gpio_irq_handler irq_handler;
static void handle_interrupt_in(uint32_t irq_index, uint32_t max_num_pin_line)
{
gpio_channel_t *gpio_channel = &channels[irq_index];
uint32_t gpio_idx;
for (gpio_idx = 0; gpio_idx < max_num_pin_line; gpio_idx++) {
uint32_t current_mask = (1 << gpio_idx);
if (gpio_channel->pin_mask & current_mask) {
// Retrieve the gpio and pin that generate the irq
GPIO_TypeDef *gpio = (GPIO_TypeDef *)(gpio_channel->channel_gpio[gpio_idx]);
uint32_t pin = (uint32_t)(1 << (gpio_channel->channel_pin[gpio_idx]));
// Clear interrupt flag
if (__HAL_GPIO_EXTI_GET_FLAG(pin) != RESET) {
__HAL_GPIO_EXTI_CLEAR_FLAG(pin);
if (gpio_channel->channel_ids[gpio_idx] == 0) continue;
// Check which edge has generated the irq
if ((gpio->IDR & pin) == 0) {
irq_handler(gpio_channel->channel_ids[gpio_idx], IRQ_FALL);
} else {
irq_handler(gpio_channel->channel_ids[gpio_idx], IRQ_RISE);
}
}
}
}
}
// EXTI line 0
static void gpio_irq0(void)
{
handle_interrupt_in(0, 1);
}
// EXTI line 1
static void gpio_irq1(void)
{
handle_interrupt_in(1, 1);
}
// EXTI line 2
static void gpio_irq2(void)
{
handle_interrupt_in(2, 1);
}
// EXTI line 3
static void gpio_irq3(void)
{
handle_interrupt_in(3, 1);
}
// EXTI line 4
static void gpio_irq4(void)
{
handle_interrupt_in(4, 1);
}
// EXTI lines 5 to 9
static void gpio_irq5(void)
{
handle_interrupt_in(5, 5);
}
// EXTI lines 10 to 15
static void gpio_irq6(void)
{
handle_interrupt_in(6, 6);
}
extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
int gpio_irq_init(gpio_irq_t *obj, PinName pin, gpio_irq_handler handler, uint32_t id)
{
IRQn_Type irq_n = (IRQn_Type)0;
uint32_t vector = 0;
uint32_t irq_index;
gpio_channel_t *gpio_channel;
uint32_t gpio_idx;
if (pin == NC) return -1;
uint32_t port_index = STM_PORT(pin);
uint32_t pin_index = STM_PIN(pin);
// Select irq number and interrupt routine
switch (pin_index) {
case 0:
irq_n = EXTI0_IRQn;
vector = (uint32_t)&gpio_irq0;
irq_index = 0;
break;
case 1:
irq_n = EXTI1_IRQn;
vector = (uint32_t)&gpio_irq1;
irq_index = 1;
break;
case 2:
irq_n = EXTI2_TSC_IRQn;
vector = (uint32_t)&gpio_irq2;
irq_index = 2;
break;
case 3:
irq_n = EXTI3_IRQn;
vector = (uint32_t)&gpio_irq3;
irq_index = 3;
break;
case 4:
irq_n = EXTI4_IRQn;
vector = (uint32_t)&gpio_irq4;
irq_index = 4;
break;
case 5:
case 6:
case 7:
case 8:
case 9:
irq_n = EXTI9_5_IRQn;
vector = (uint32_t)&gpio_irq5;
irq_index = 5;
break;
case 10:
case 11:
case 12:
case 13:
case 14:
case 15:
irq_n = EXTI15_10_IRQn;
vector = (uint32_t)&gpio_irq6;
irq_index = 6;
break;
default:
error("InterruptIn error: pin not supported.\n");
return -1;
}
// Enable GPIO clock
uint32_t gpio_add = Set_GPIO_Clock(port_index);
// Configure GPIO
pin_function(pin, STM_PIN_DATA(STM_MODE_IT_FALLING, GPIO_NOPULL, 0));
// Enable EXTI interrupt
NVIC_SetVector(irq_n, vector);
NVIC_EnableIRQ(irq_n);
// Save informations for future use
obj->irq_n = irq_n;
obj->irq_index = irq_index;
obj->event = EDGE_NONE;
obj->pin = pin;
gpio_channel = &channels[irq_index];
gpio_idx = pin_base_nr[pin_index];
gpio_channel->pin_mask |= (1 << gpio_idx);
gpio_channel->channel_ids[gpio_idx] = id;
gpio_channel->channel_gpio[gpio_idx] = gpio_add;
gpio_channel->channel_pin[gpio_idx] = pin_index;
irq_handler = handler;
return 0;
}
void gpio_irq_free(gpio_irq_t *obj)
{
gpio_channel_t *gpio_channel = &channels[obj->irq_index];
uint32_t pin_index = STM_PIN(obj->pin);
uint32_t gpio_idx = pin_base_nr[pin_index];
gpio_channel->pin_mask &= ~(1 << gpio_idx);
gpio_channel->channel_ids[gpio_idx] = 0;
gpio_channel->channel_gpio[gpio_idx] = 0;
gpio_channel->channel_pin[gpio_idx] = 0;
// Disable EXTI line
pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
obj->event = EDGE_NONE;
}
void gpio_irq_set(gpio_irq_t *obj, gpio_irq_event event, uint32_t enable)
{
uint32_t mode = STM_MODE_IT_EVT_RESET;
uint32_t pull = GPIO_NOPULL;
if (enable) {
if (event == IRQ_RISE) {
if ((obj->event == EDGE_FALL) || (obj->event == EDGE_BOTH)) {
mode = STM_MODE_IT_RISING_FALLING;
obj->event = EDGE_BOTH;
} else { // NONE or RISE
mode = STM_MODE_IT_RISING;
obj->event = EDGE_RISE;
}
}
if (event == IRQ_FALL) {
if ((obj->event == EDGE_RISE) || (obj->event == EDGE_BOTH)) {
mode = STM_MODE_IT_RISING_FALLING;
obj->event = EDGE_BOTH;
} else { // NONE or FALL
mode = STM_MODE_IT_FALLING;
obj->event = EDGE_FALL;
}
}
} else { // Disable
if (event == IRQ_RISE) {
if ((obj->event == EDGE_FALL) || (obj->event == EDGE_BOTH)) {
mode = STM_MODE_IT_FALLING;
obj->event = EDGE_FALL;
} else { // NONE or RISE
mode = STM_MODE_IT_EVT_RESET;
obj->event = EDGE_NONE;
}
}
if (event == IRQ_FALL) {
if ((obj->event == EDGE_RISE) || (obj->event == EDGE_BOTH)) {
mode = STM_MODE_IT_RISING;
obj->event = EDGE_RISE;
} else { // NONE or FALL
mode = STM_MODE_IT_EVT_RESET;
obj->event = EDGE_NONE;
}
}
}
pin_function(obj->pin, STM_PIN_DATA(mode, pull, 0));
}
void gpio_irq_enable(gpio_irq_t *obj)
{
NVIC_EnableIRQ(obj->irq_n);
}
void gpio_irq_disable(gpio_irq_t *obj)
{
NVIC_DisableIRQ(obj->irq_n);
obj->event = EDGE_NONE;
}

71
libraries/mbed/targets/hal/TARGET_STM/TARGET_NUCLEO_F303RE/gpio_object.h Normal file
View File

@ -0,0 +1,71 @@
/* mbed Microcontroller Library
*******************************************************************************
* Copyright (c) 2014, STMicroelectronics
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************
*/
#ifndef MBED_GPIO_OBJECT_H
#define MBED_GPIO_OBJECT_H
#include "mbed_assert.h"
#include "cmsis.h"
#include "PortNames.h"
#include "PeripheralNames.h"
#include "PinNames.h"
#ifdef __cplusplus
extern "C" {
#endif
typedef struct {
PinName pin;
uint32_t mask;
__IO uint32_t *reg_in;
__IO uint16_t *reg_set;
__IO uint16_t *reg_clr;
} gpio_t;
static inline void gpio_write(gpio_t *obj, int value)
{
MBED_ASSERT(obj->pin != (PinName)NC);
if (value) {
*obj->reg_set = obj->mask;
} else {
*obj->reg_clr = obj->mask;
}
}
static inline int gpio_read(gpio_t *obj)
{
MBED_ASSERT(obj->pin != (PinName)NC);
return ((*obj->reg_in & obj->mask) ? 1 : 0);
}
#ifdef __cplusplus
}
#endif
#endif

442
libraries/mbed/targets/hal/TARGET_STM/TARGET_NUCLEO_F303RE/i2c_api.c Normal file
View File

@ -0,0 +1,442 @@
/* mbed Microcontroller Library
*******************************************************************************
* Copyright (c) 2014, STMicroelectronics
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************
*/
#include "mbed_assert.h"
#include "i2c_api.h"
#if DEVICE_I2C
#include "cmsis.h"
#include "pinmap.h"
#include "PeripheralPins.h"
/* Timeout values for flags and events waiting loops. These timeouts are
not based on accurate values, they just guarantee that the application will
not remain stuck if the I2C communication is corrupted. */
#define FLAG_TIMEOUT ((int)0x4000)
#define LONG_TIMEOUT ((int)0x8000)
I2C_HandleTypeDef I2cHandle;
int i2c1_inited = 0;
int i2c2_inited = 0;
int i2c3_inited = 0;
void i2c_init(i2c_t *obj, PinName sda, PinName scl)
{
// Determine the I2C to use
I2CName i2c_sda = (I2CName)pinmap_peripheral(sda, PinMap_I2C_SDA);
I2CName i2c_scl = (I2CName)pinmap_peripheral(scl, PinMap_I2C_SCL);
obj->i2c = (I2CName)pinmap_merge(i2c_sda, i2c_scl);
MBED_ASSERT(obj->i2c != (I2CName)NC);
// Enable I2C clock and pinout if not done
if ((obj->i2c == I2C_1) && !i2c1_inited) {
i2c1_inited = 1;
__HAL_RCC_I2C1_CONFIG(RCC_I2C1CLKSOURCE_SYSCLK);
__I2C1_CLK_ENABLE();
// Configure I2C1 pins
pinmap_pinout(sda, PinMap_I2C_SDA);
pinmap_pinout(scl, PinMap_I2C_SCL);
pin_mode(sda, OpenDrain);
pin_mode(scl, OpenDrain);
}
if ((obj->i2c == I2C_2) && !i2c2_inited) {
i2c2_inited = 1;
__I2C2_CLK_ENABLE();
// Configure I2C2 pins
pinmap_pinout(sda, PinMap_I2C_SDA);
pinmap_pinout(scl, PinMap_I2C_SCL);
pin_mode(sda, OpenDrain);
pin_mode(scl, OpenDrain);
}
if ((obj->i2c == I2C_3) && !i2c3_inited) {
i2c3_inited = 1;
__I2C3_CLK_ENABLE();
// Configure I2C3 pins
pinmap_pinout(sda, PinMap_I2C_SDA);
pinmap_pinout(scl, PinMap_I2C_SCL);
pin_mode(sda, OpenDrain);
pin_mode(scl, OpenDrain);
}
// Reset to clear pending flags if any
i2c_reset(obj);
// I2C configuration
i2c_frequency(obj, 100000); // 100 kHz per default
}
void i2c_frequency(i2c_t *obj, int hz)
{
uint32_t tim = 0;
MBED_ASSERT((hz == 100000) || (hz == 400000) || (hz == 1000000));
I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
int timeout;
// wait before init
timeout = LONG_TIMEOUT;
while ((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY)) && (timeout-- != 0));
// Update the SystemCoreClock variable.
SystemCoreClockUpdate();
/*
Values calculated with I2C_Timing_Configuration_V1.0.1.xls file (see AN4235)
* Standard mode (up to 100 kHz)
* Fast Mode (up to 400 kHz)
* Fast Mode Plus (up to 1 MHz)
Below values obtained with:
- I2C clock source = 64 MHz (System Clock w/ HSI) or 72 (System Clock w/ HSE)
- Analog filter delay = ON
- Digital filter coefficient = 0
*/
if (SystemCoreClock == 64000000) {
switch (hz) {
case 100000:
tim = 0x10B17DB4; // Standard mode with Rise time = 120ns, Fall time = 120ns
break;
case 400000:
tim = 0x00E22163; // Fast Mode with Rise time = 120ns, Fall time = 120ns
break;
case 1000000:
tim = 0x00A00D1E; // Fast Mode Plus with Rise time = 120ns, Fall time = 10ns
break;
default:
break;
}
} else if (SystemCoreClock == 72000000) {
switch (hz) {
case 100000:
tim = 0x10D28DCB; // Standard mode with Rise time = 120ns, Fall time = 120ns
break;
case 400000:
tim = 0x00F32571; // Fast Mode with Rise time = 120ns, Fall time = 120ns
break;
case 1000000:
tim = 0x00C00D24; // Fast Mode Plus with Rise time = 120ns, Fall time = 10ns
break;
default:
break;
}
}
// Enable the Fast Mode Plus capability
if (hz == 1000000) {
if (obj->i2c == I2C_1) {
__HAL_SYSCFG_FASTMODEPLUS_ENABLE(HAL_SYSCFG_FASTMODEPLUS_I2C1);
}
if (obj->i2c == I2C_2) {
__HAL_SYSCFG_FASTMODEPLUS_ENABLE(HAL_SYSCFG_FASTMODEPLUS_I2C2);
}
if (obj->i2c == I2C_3) {
__HAL_SYSCFG_FASTMODEPLUS_ENABLE(HAL_SYSCFG_FASTMODEPLUS_I2C3);
}
}
// I2C configuration
I2cHandle.Init.Timing = tim;
I2cHandle.Init.AddressingMode = I2C_ADDRESSINGMODE_7BIT;
I2cHandle.Init.DualAddressMode = I2C_DUALADDRESS_DISABLED;
I2cHandle.Init.GeneralCallMode = I2C_GENERALCALL_DISABLED;
I2cHandle.Init.NoStretchMode = I2C_NOSTRETCH_DISABLED;
I2cHandle.Init.OwnAddress1 = 0;
I2cHandle.Init.OwnAddress2 = 0;
I2cHandle.Init.OwnAddress2Masks = I2C_OA2_NOMASK;
HAL_I2C_Init(&I2cHandle);
}
inline int i2c_start(i2c_t *obj)
{
I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
int timeout;
I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
// Clear Acknowledge failure flag
__HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_AF);
// Generate the START condition
i2c->CR2 |= I2C_CR2_START;
// Wait the START condition has been correctly sent
timeout = FLAG_TIMEOUT;
while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY) == RESET) {
if ((timeout--) == 0) {
return 1;
}
}
return 0;
}
inline int i2c_stop(i2c_t *obj)
{
I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
// Generate the STOP condition
i2c->CR2 |= I2C_CR2_STOP;
return 0;
}
int i2c_read(i2c_t *obj, int address, char *data, int length, int stop)
{
I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
int timeout;
int count;
int value;
/* update CR2 register */
i2c->CR2 = (i2c->CR2 & (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_AUTOEND | I2C_CR2_RD_WRN | I2C_CR2_START | I2C_CR2_STOP)))
| (uint32_t)(((uint32_t)address & I2C_CR2_SADD) | (((uint32_t)length << 16) & I2C_CR2_NBYTES) | (uint32_t)I2C_SOFTEND_MODE | (uint32_t)I2C_GENERATE_START_READ);
// Read all bytes
for (count = 0; count < length; count++) {
value = i2c_byte_read(obj, 0);
data[count] = (char)value;
}
// Wait transfer complete
timeout = LONG_TIMEOUT;
while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_TC) == RESET) {
timeout--;
if (timeout == 0) {
return -1;
}
}
__HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_TC);
// If not repeated start, send stop.
if (stop) {
i2c_stop(obj);
/* Wait until STOPF flag is set */
timeout = FLAG_TIMEOUT;
while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_STOPF) == RESET) {
timeout--;
if (timeout == 0) {
return -1;
}
}
/* Clear STOP Flag */
__HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_STOPF);
}
return length;
}
int i2c_write(i2c_t *obj, int address, const char *data, int length, int stop)
{
I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
int timeout;
int count;
/* update CR2 register */
i2c->CR2 = (i2c->CR2 & (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_AUTOEND | I2C_CR2_RD_WRN | I2C_CR2_START | I2C_CR2_STOP)))
| (uint32_t)(((uint32_t)address & I2C_CR2_SADD) | (((uint32_t)length << 16) & I2C_CR2_NBYTES) | (uint32_t)I2C_SOFTEND_MODE | (uint32_t)I2C_GENERATE_START_WRITE);
for (count = 0; count < length; count++) {
i2c_byte_write(obj, data[count]);
}
// Wait transfer complete
timeout = FLAG_TIMEOUT;
while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_TC) == RESET) {
timeout--;
if (timeout == 0) {
return -1;
}
}
__HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_TC);
// If not repeated start, send stop.
if (stop) {
i2c_stop(obj);
/* Wait until STOPF flag is set */
timeout = FLAG_TIMEOUT;
while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_STOPF) == RESET) {
timeout--;
if (timeout == 0) {
return -1;
}
}
/* Clear STOP Flag */
__HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_STOPF);
}
return count;
}
int i2c_byte_read(i2c_t *obj, int last)
{
I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
int timeout;
// Wait until the byte is received
timeout = FLAG_TIMEOUT;
while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_RXNE) == RESET) {
if ((timeout--) == 0) {
return -1;
}
}
return (int)i2c->RXDR;
}
int i2c_byte_write(i2c_t *obj, int data)
{
I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
int timeout;
// Wait until the previous byte is transmitted
timeout = FLAG_TIMEOUT;
while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_TXIS) == RESET) {
if ((timeout--) == 0) {
return 0;
}
}
i2c->TXDR = (uint8_t)data;
return 1;
}
void i2c_reset(i2c_t *obj)
{
int timeout;
// wait before reset
timeout = LONG_TIMEOUT;
while ((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY)) && (timeout-- != 0));
__I2C1_FORCE_RESET();
__I2C1_RELEASE_RESET();
}
#if DEVICE_I2CSLAVE
void i2c_slave_address(i2c_t *obj, int idx, uint32_t address, uint32_t mask)
{
I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
uint16_t tmpreg;
// disable
i2c->OAR1 &= (uint32_t)(~I2C_OAR1_OA1EN);
// Get the old register value
tmpreg = i2c->OAR1;
// Reset address bits
tmpreg &= 0xFC00;
// Set new address
tmpreg |= (uint16_t)((uint16_t)address & (uint16_t)0x00FE); // 7-bits
// Store the new register value
i2c->OAR1 = tmpreg;
// enable
i2c->OAR1 |= I2C_OAR1_OA1EN;
}
void i2c_slave_mode(i2c_t *obj, int enable_slave)
{
I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
uint16_t tmpreg;
// Get the old register value
tmpreg = i2c->OAR1;
// Enable / disable slave
if (enable_slave == 1) {
tmpreg |= I2C_OAR1_OA1EN;
} else {
tmpreg &= (uint32_t)(~I2C_OAR1_OA1EN);
}
// Set new mode
i2c->OAR1 = tmpreg;
}
// See I2CSlave.h
#define NoData 0 // the slave has not been addressed
#define ReadAddressed 1 // the master has requested a read from this slave (slave = transmitter)
#define WriteGeneral 2 // the master is writing to all slave
#define WriteAddressed 3 // the master is writing to this slave (slave = receiver)
int i2c_slave_receive(i2c_t *obj)
{
I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
int retValue = NoData;
if (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY) == 1) {
if (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_ADDR) == 1) {
if (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_DIR) == 1)
retValue = ReadAddressed;
else
retValue = WriteAddressed;
__HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_ADDR);
}
}
return (retValue);
}
int i2c_slave_read(i2c_t *obj, char *data, int length)
{
char size = 0;
while (size < length) data[size++] = (char)i2c_byte_read(obj, 0);
return size;
}
int i2c_slave_write(i2c_t *obj, const char *data, int length)
{
char size = 0;
I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
do {
i2c_byte_write(obj, data[size]);
size++;
} while (size < length);
return size;
}
#endif // DEVICE_I2CSLAVE
#endif // DEVICE_I2C

37
libraries/mbed/targets/hal/TARGET_STM/TARGET_NUCLEO_F303RE/mbed_overrides.c Normal file
View File

@ -0,0 +1,37 @@
/* mbed Microcontroller Library
* Copyright (c) 2014, STMicroelectronics
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include "cmsis.h"
// This function is called after RAM initialization and before main.
void mbed_sdk_init()
{
// Update the SystemCoreClock variable.
SystemCoreClockUpdate();
// Need to restart HAL driver after the RAM is initialized
HAL_Init();
}

110
libraries/mbed/targets/hal/TARGET_STM/TARGET_NUCLEO_F303RE/objects.h Normal file
View File

@ -0,0 +1,110 @@
/* mbed Microcontroller Library
*******************************************************************************
* Copyright (c) 2014, STMicroelectronics
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************
*/
#ifndef MBED_OBJECTS_H
#define MBED_OBJECTS_H
#include "cmsis.h"
#include "PortNames.h"
#include "PeripheralNames.h"
#include "PinNames.h"
#ifdef __cplusplus
extern "C" {
#endif
struct gpio_irq_s {
IRQn_Type irq_n;
uint32_t irq_index;
uint32_t event;
PinName pin;
};
struct port_s {
PortName port;
uint32_t mask;
PinDirection direction;
__IO uint32_t *reg_in;
__IO uint32_t *reg_out;
};
struct analogin_s {
ADCName adc;
PinName pin;
};
struct dac_s {
DACName dac;
PinName pin;
};
struct serial_s {
UARTName uart;
int index; // Used by irq
uint32_t baudrate;
uint32_t databits;
uint32_t stopbits;
uint32_t parity;
PinName pin_tx;
PinName pin_rx;
};
struct spi_s {
SPIName spi;
uint32_t bits;
uint32_t cpol;
uint32_t cpha;
uint32_t mode;
uint32_t nss;
uint32_t br_presc;
PinName pin_miso;
PinName pin_mosi;
PinName pin_sclk;
PinName pin_ssel;
};
struct i2c_s {
I2CName i2c;
uint32_t slave;
};
struct pwmout_s {
PWMName pwm;
PinName pin;
uint32_t period;
uint32_t pulse;
};
#include "gpio_object.h"
#ifdef __cplusplus
}
#endif
#endif

139
libraries/mbed/targets/hal/TARGET_STM/TARGET_NUCLEO_F303RE/pinmap.c Normal file
View File

@ -0,0 +1,139 @@
/* mbed Microcontroller Library
*******************************************************************************
* Copyright (c) 2014, STMicroelectronics
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************
*/
#include "mbed_assert.h"
#include "pinmap.h"
#include "PortNames.h"
#include "mbed_error.h"
// GPIO mode look-up table
// Warning: the elements order must be the same as the one defined in PinNames.h
static const uint32_t gpio_mode[13] = {
GPIO_MODE_INPUT, // 0 = STM_MODE_INPUT
GPIO_MODE_OUTPUT_PP, // 1 = STM_MODE_OUTPUT_PP
GPIO_MODE_OUTPUT_OD, // 2 = STM_MODE_OUTPUT_OD
GPIO_MODE_AF_PP, // 3 = STM_MODE_AF_PP
GPIO_MODE_AF_OD, // 4 = STM_MODE_AF_OD
GPIO_MODE_ANALOG, // 5 = STM_MODE_ANALOG
GPIO_MODE_IT_RISING, // 6 = STM_MODE_IT_RISING
GPIO_MODE_IT_FALLING, // 7 = STM_MODE_IT_FALLING
GPIO_MODE_IT_RISING_FALLING, // 8 = STM_MODE_IT_RISING_FALLING
GPIO_MODE_EVT_RISING, // 9 = STM_MODE_EVT_RISING
GPIO_MODE_EVT_FALLING, // 10 = STM_MODE_EVT_FALLING
GPIO_MODE_EVT_RISING_FALLING, // 11 = STM_MODE_EVT_RISING_FALLING
0x10000000 // 12 = STM_MODE_IT_EVT_RESET (not in STM32Cube HAL)
};
// Enable GPIO clock and return GPIO base address
uint32_t Set_GPIO_Clock(uint32_t port_idx)
{
uint32_t gpio_add = 0;
switch (port_idx) {
case PortA:
gpio_add = GPIOA_BASE;
__GPIOA_CLK_ENABLE();
break;
case PortB:
gpio_add = GPIOB_BASE;
__GPIOB_CLK_ENABLE();
break;
case PortC:
gpio_add = GPIOC_BASE;
__GPIOC_CLK_ENABLE();
break;
case PortD:
gpio_add = GPIOD_BASE;
__GPIOD_CLK_ENABLE();
break;
case PortF:
gpio_add = GPIOF_BASE;
__GPIOF_CLK_ENABLE();
break;
default:
error("Pinmap error: wrong port number.");
break;
}
return gpio_add;
}
/**
* Configure pin (mode, speed, output type and pull-up/pull-down)
*/
void pin_function(PinName pin, int data)
{
MBED_ASSERT(pin != (PinName)NC);
// Get the pin informations
uint32_t mode = STM_PIN_MODE(data);
uint32_t pupd = STM_PIN_PUPD(data);
uint32_t afnum = STM_PIN_AFNUM(data);
uint32_t port_index = STM_PORT(pin);
uint32_t pin_index = STM_PIN(pin);
// Enable GPIO clock
uint32_t gpio_add = Set_GPIO_Clock(port_index);
GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
// Configure GPIO
GPIO_InitTypeDef GPIO_InitStructure;
GPIO_InitStructure.Pin = (uint32_t)(1 << pin_index);
GPIO_InitStructure.Mode = gpio_mode[mode];
GPIO_InitStructure.Pull = pupd;
GPIO_InitStructure.Speed = GPIO_SPEED_HIGH;
GPIO_InitStructure.Alternate = afnum;
HAL_GPIO_Init(gpio, &GPIO_InitStructure);
// [TODO] Disconnect JTAG-DP + SW-DP signals.
// Warning: Need to reconnect under reset
//if ((pin == PA_13) || (pin == PA_14)) {
//
//}
}
/**
* Configure pin pull-up/pull-down
*/
void pin_mode(PinName pin, PinMode mode)
{
MBED_ASSERT(pin != (PinName)NC);
uint32_t port_index = STM_PORT(pin);
uint32_t pin_index = STM_PIN(pin);
// Enable GPIO clock
uint32_t gpio_add = Set_GPIO_Clock(port_index);
GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
// Configure pull-up/pull-down resistors
uint32_t pupd = (uint32_t)mode;
if (pupd > 2) {
pupd = 0; // Open-drain = No pull-up/No pull-down
}
gpio->PUPDR &= (uint32_t)(~(GPIO_PUPDR_PUPDR0 << (pin_index * 2)));
gpio->PUPDR |= (uint32_t)(pupd << (pin_index * 2));
}

103
libraries/mbed/targets/hal/TARGET_STM/TARGET_NUCLEO_F303RE/port_api.c Normal file
View File

@ -0,0 +1,103 @@
/* mbed Microcontroller Library
*******************************************************************************
* Copyright (c) 2014, STMicroelectronics
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************
*/
#include "port_api.h"
#include "pinmap.h"
#include "gpio_api.h"
#include "mbed_error.h"
#if DEVICE_PORTIN || DEVICE_PORTOUT
extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
// high nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, ...)
// low nibble = pin number
PinName port_pin(PortName port, int pin_n)
{
return (PinName)(pin_n + (port << 4));
}
void port_init(port_t *obj, PortName port, int mask, PinDirection dir)
{
uint32_t port_index = (uint32_t)port;
// Enable GPIO clock
uint32_t gpio_add = Set_GPIO_Clock(port_index);
GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
// Fill PORT object structure for future use
obj->port = port;
obj->mask = mask;
obj->direction = dir;
obj->reg_in = &gpio->IDR;
obj->reg_out = &gpio->ODR;
port_dir(obj, dir);
}
void port_dir(port_t *obj, PinDirection dir)
{
uint32_t i;
obj->direction = dir;
for (i = 0; i < 16; i++) { // Process all pins
if (obj->mask & (1 << i)) { // If the pin is used
if (dir == PIN_OUTPUT) {
pin_function(port_pin(obj->port, i), STM_PIN_DATA(STM_MODE_OUTPUT_PP, GPIO_NOPULL, 0));
} else { // PIN_INPUT
pin_function(port_pin(obj->port, i), STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
}
}
}
}
void port_mode(port_t *obj, PinMode mode)
{
uint32_t i;
for (i = 0; i < 16; i++) { // Process all pins
if (obj->mask & (1 << i)) { // If the pin is used
pin_mode(port_pin(obj->port, i), mode);
}
}
}
void port_write(port_t *obj, int value)
{
*obj->reg_out = (*obj->reg_out & ~obj->mask) | (value & obj->mask);
}
int port_read(port_t *obj)
{
if (obj->direction == PIN_OUTPUT) {
return (*obj->reg_out & obj->mask);
} else { // PIN_INPUT
return (*obj->reg_in & obj->mask);
}
}
#endif

246
libraries/mbed/targets/hal/TARGET_STM/TARGET_NUCLEO_F303RE/pwmout_api.c Normal file
View File

@ -0,0 +1,246 @@
/* mbed Microcontroller Library
*******************************************************************************
* Copyright (c) 2014, STMicroelectronics
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************
*/
#include "pwmout_api.h"
#if DEVICE_PWMOUT
#include "cmsis.h"
#include "pinmap.h"
#include "mbed_error.h"
#include "PeripheralPins.h"
static TIM_HandleTypeDef TimHandle;
void pwmout_init(pwmout_t* obj, PinName pin)
{
// Get the peripheral name from the pin and assign it to the object
obj->pwm = (PWMName)pinmap_peripheral(pin, PinMap_PWM);
if (obj->pwm == (PWMName)NC) {
error("PWM error: pinout mapping failed.");
}
// Enable TIM clock
if (obj->pwm == PWM_1) __TIM1_CLK_ENABLE();
if (obj->pwm == PWM_2) __TIM2_CLK_ENABLE();
if (obj->pwm == PWM_3) __TIM3_CLK_ENABLE();
if (obj->pwm == PWM_8) __TIM8_CLK_ENABLE();
if (obj->pwm == PWM_15) __TIM15_CLK_ENABLE();
if (obj->pwm == PWM_16) __TIM16_CLK_ENABLE();
if (obj->pwm == PWM_17) __TIM17_CLK_ENABLE();
// Configure GPIO
pinmap_pinout(pin, PinMap_PWM);
obj->pin = pin;
obj->period = 0;
obj->pulse = 0;
pwmout_period_us(obj, 20000); // 20 ms per default
}
void pwmout_free(pwmout_t* obj)
{
// Configure GPIO
pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
}
void pwmout_write(pwmout_t* obj, float value)
{
TIM_OC_InitTypeDef sConfig;
int channel = 0;
int complementary_channel = 0;
TimHandle.Instance = (TIM_TypeDef *)(obj->pwm);
if (value < (float)0.0) {
value = 0.0;
} else if (value > (float)1.0) {
value = 1.0;
}
obj->pulse = (uint32_t)((float)obj->period * value);
// Configure channels
sConfig.OCMode = TIM_OCMODE_PWM1;
sConfig.Pulse = obj->pulse;
sConfig.OCPolarity = TIM_OCPOLARITY_HIGH;
sConfig.OCNPolarity = TIM_OCNPOLARITY_HIGH;
sConfig.OCFastMode = TIM_OCFAST_DISABLE;
sConfig.OCIdleState = TIM_OCIDLESTATE_RESET;
sConfig.OCNIdleState = TIM_OCNIDLESTATE_RESET;
switch (obj->pin) {
// Channels 1
case PA_2:
case PA_6:
case PA_7:
case PA_8:
case PA_12:
case PA_15:
case PB_4:
case PB_5:
case PB_8:
case PB_9:
case PB_14:
case PC_0:
case PC_6:
channel = TIM_CHANNEL_1;
break;
// Channels 1N
case PA_1:
case PA_13:
case PB_3:
case PB_6:
case PB_7:
case PB_13:
case PC_10:
case PC_13:
channel = TIM_CHANNEL_1;
complementary_channel = 1;
break;
// Channels 2
case PA_3:
case PA_4:
case PA_9:
case PA_14:
case PB_15:
case PC_1:
case PC_7:
channel = TIM_CHANNEL_2;
break;
// Channels 2N
case PB_0:
case PC_11:
channel = TIM_CHANNEL_2;
complementary_channel = 1;
break;
// Channels 3
case PA_10:
case PC_2:
case PC_8:
channel = TIM_CHANNEL_3;
break;
// Channels 3N
case PB_1:
case PC_12:
case PF_0:
channel = TIM_CHANNEL_3;
complementary_channel = 1;
break;
// Channels 4
case PA_11:
case PC_3:
case PC_9:
channel = TIM_CHANNEL_4;
break;
default:
return;
}
HAL_TIM_PWM_ConfigChannel(&TimHandle, &sConfig, channel);
if (complementary_channel) {
HAL_TIMEx_PWMN_Start(&TimHandle, channel);
} else {
HAL_TIM_PWM_Start(&TimHandle, channel);
}
}
float pwmout_read(pwmout_t* obj)
{
float value = 0;
if (obj->period > 0) {
value = (float)(obj->pulse) / (float)(obj->period);
}
return ((value > (float)1.0) ? (float)(1.0) : (value));
}
void pwmout_period(pwmout_t* obj, float seconds)
{
pwmout_period_us(obj, seconds * 1000000.0f);
}
void pwmout_period_ms(pwmout_t* obj, int ms)
{
pwmout_period_us(obj, ms * 1000);
}
void pwmout_period_us(pwmout_t* obj, int us)
{
TimHandle.Instance = (TIM_TypeDef *)(obj->pwm);
float dc = pwmout_read(obj);
__HAL_TIM_DISABLE(&TimHandle);
// Update the SystemCoreClock variable
SystemCoreClockUpdate();
TimHandle.Init.Period = us - 1;
TimHandle.Init.Prescaler = (uint16_t)(SystemCoreClock / 1000000) - 1; // 1 µs tick
TimHandle.Init.ClockDivision = 0;
TimHandle.Init.CounterMode = TIM_COUNTERMODE_UP;
HAL_TIM_PWM_Init(&TimHandle);
// Set duty cycle again
pwmout_write(obj, dc);
// Save for future use
obj->period = us;
__HAL_TIM_ENABLE(&TimHandle);
}
void pwmout_pulsewidth(pwmout_t* obj, float seconds)
{
pwmout_pulsewidth_us(obj, seconds * 1000000.0f);
}
void pwmout_pulsewidth_ms(pwmout_t* obj, int ms)
{
pwmout_pulsewidth_us(obj, ms * 1000);
}
void pwmout_pulsewidth_us(pwmout_t* obj, int us)
{
float value = (float)us / (float)obj->period;
pwmout_write(obj, value);
}
#endif

201
libraries/mbed/targets/hal/TARGET_STM/TARGET_NUCLEO_F303RE/rtc_api.c Normal file
View File

@ -0,0 +1,201 @@
/* mbed Microcontroller Library
*******************************************************************************
* Copyright (c) 2014, STMicroelectronics
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************
*/
#include "rtc_api.h"
#if DEVICE_RTC
#include "mbed_error.h"
static int rtc_inited = 0;
static RTC_HandleTypeDef RtcHandle;
void rtc_init(void)
{
RCC_OscInitTypeDef RCC_OscInitStruct;
uint32_t rtc_freq = 0;
if (rtc_inited) return;
rtc_inited = 1;
RtcHandle.Instance = RTC;
// Enable Power clock
__PWR_CLK_ENABLE();
// Enable access to Backup domain
HAL_PWR_EnableBkUpAccess();
// Reset Backup domain
__HAL_RCC_BACKUPRESET_FORCE();
__HAL_RCC_BACKUPRESET_RELEASE();
// Enable LSE Oscillator
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSE;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; /* Mandatory, otherwise the PLL is reconfigured! */
RCC_OscInitStruct.LSEState = RCC_LSE_ON; /* External 32.768 kHz clock on OSC_IN/OSC_OUT */
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) == HAL_OK) {
// Connect LSE to RTC
__HAL_RCC_RTC_CONFIG(RCC_RTCCLKSOURCE_LSE);
rtc_freq = LSE_VALUE;
} else {
// Enable LSI clock
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_LSE;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; // Mandatory, otherwise the PLL is reconfigured!
RCC_OscInitStruct.LSEState = RCC_LSE_OFF;
RCC_OscInitStruct.LSIState = RCC_LSI_ON;
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
error("RTC error: LSI clock initialization failed.");
}
// Connect LSI to RTC
__HAL_RCC_RTC_CONFIG(RCC_RTCCLKSOURCE_LSI);
// Note: The LSI clock can be measured precisely using a timer input capture.
rtc_freq = LSI_VALUE;
}
// Enable RTC
__HAL_RCC_RTC_ENABLE();
RtcHandle.Init.HourFormat = RTC_HOURFORMAT_24;
RtcHandle.Init.AsynchPrediv = 127;
RtcHandle.Init.SynchPrediv = (rtc_freq / 128) - 1;
RtcHandle.Init.OutPut = RTC_OUTPUT_DISABLE;
RtcHandle.Init.OutPutPolarity = RTC_OUTPUT_POLARITY_HIGH;
RtcHandle.Init.OutPutType = RTC_OUTPUT_TYPE_OPENDRAIN;
if (HAL_RTC_Init(&RtcHandle) != HAL_OK) {
error("RTC error: RTC initialization failed.");
}
}
void rtc_free(void)
{
// Enable Power clock
__PWR_CLK_ENABLE();
// Enable access to Backup domain
HAL_PWR_EnableBkUpAccess();
// Reset Backup domain
__HAL_RCC_BACKUPRESET_FORCE();
__HAL_RCC_BACKUPRESET_RELEASE();
// Disable access to Backup domain
HAL_PWR_DisableBkUpAccess();
// Disable LSI and LSE clocks
RCC_OscInitTypeDef RCC_OscInitStruct;
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_LSE;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
RCC_OscInitStruct.LSIState = RCC_LSI_OFF;
RCC_OscInitStruct.LSEState = RCC_LSE_OFF;
HAL_RCC_OscConfig(&RCC_OscInitStruct);
rtc_inited = 0;
}
int rtc_isenabled(void)
{
return rtc_inited;
}
/*
RTC Registers
RTC_WeekDay 1=monday, 2=tuesday, ..., 7=sunday
RTC_Month 1=january, 2=february, ..., 12=december
RTC_Date day of the month 1-31
RTC_Year year 0-99
struct tm
tm_sec seconds after the minute 0-61
tm_min minutes after the hour 0-59
tm_hour hours since midnight 0-23
tm_mday day of the month 1-31
tm_mon months since January 0-11
tm_year years since 1900
tm_wday days since Sunday 0-6
tm_yday days since January 1 0-365
tm_isdst Daylight Saving Time flag
*/
time_t rtc_read(void)
{
RTC_DateTypeDef dateStruct;
RTC_TimeTypeDef timeStruct;
struct tm timeinfo;
RtcHandle.Instance = RTC;
// Read actual date and time
// Warning: the time must be read first!
HAL_RTC_GetTime(&RtcHandle, &timeStruct, FORMAT_BIN);
HAL_RTC_GetDate(&RtcHandle, &dateStruct, FORMAT_BIN);
// Setup a tm structure based on the RTC
timeinfo.tm_wday = dateStruct.WeekDay;
timeinfo.tm_mon = dateStruct.Month - 1;
timeinfo.tm_mday = dateStruct.Date;
timeinfo.tm_year = dateStruct.Year + 100;
timeinfo.tm_hour = timeStruct.Hours;
timeinfo.tm_min = timeStruct.Minutes;
timeinfo.tm_sec = timeStruct.Seconds;
// Convert to timestamp
time_t t = mktime(&timeinfo);
return t;
}
void rtc_write(time_t t)
{
RTC_DateTypeDef dateStruct;
RTC_TimeTypeDef timeStruct;
RtcHandle.Instance = RTC;
// Convert the time into a tm
struct tm *timeinfo = localtime(&t);
// Fill RTC structures
dateStruct.WeekDay = timeinfo->tm_wday;
dateStruct.Month = timeinfo->tm_mon + 1;
dateStruct.Date = timeinfo->tm_mday;
dateStruct.Year = timeinfo->tm_year - 100;
timeStruct.Hours = timeinfo->tm_hour;
timeStruct.Minutes = timeinfo->tm_min;
timeStruct.Seconds = timeinfo->tm_sec;
timeStruct.TimeFormat = RTC_HOURFORMAT12_PM;
timeStruct.DayLightSaving = RTC_DAYLIGHTSAVING_NONE;
timeStruct.StoreOperation = RTC_STOREOPERATION_RESET;
// Change the RTC current date/time
HAL_RTC_SetDate(&RtcHandle, &dateStruct, FORMAT_BIN);
HAL_RTC_SetTime(&RtcHandle, &timeStruct, FORMAT_BIN);
}
#endif

392
libraries/mbed/targets/hal/TARGET_STM/TARGET_NUCLEO_F303RE/serial_api.c Normal file
View File

@ -0,0 +1,392 @@
/* mbed Microcontroller Library
*******************************************************************************
* Copyright (c) 2014, STMicroelectronics
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************
*/
#include "mbed_assert.h"
#include "serial_api.h"
#if DEVICE_SERIAL
#include "cmsis.h"
#include "pinmap.h"
#include <string.h>
#include "PeripheralPins.h"
#define UART_NUM (3)
static uint32_t serial_irq_ids[UART_NUM] = {0, 0, 0};
static uart_irq_handler irq_handler;
UART_HandleTypeDef UartHandle;
int stdio_uart_inited = 0;
serial_t stdio_uart;
static void init_uart(serial_t *obj)
{
UartHandle.Instance = (USART_TypeDef *)(obj->uart);
UartHandle.Init.BaudRate = obj->baudrate;
UartHandle.Init.WordLength = obj->databits;
UartHandle.Init.StopBits = obj->stopbits;
UartHandle.Init.Parity = obj->parity;
UartHandle.Init.HwFlowCtl = UART_HWCONTROL_NONE;
if (obj->pin_rx == NC) {
UartHandle.Init.Mode = UART_MODE_TX;
} else if (obj->pin_tx == NC) {
UartHandle.Init.Mode = UART_MODE_RX;
} else {
UartHandle.Init.Mode = UART_MODE_TX_RX;
}
// Disable the reception overrun detection
UartHandle.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_RXOVERRUNDISABLE_INIT;
UartHandle.AdvancedInit.OverrunDisable = UART_ADVFEATURE_OVERRUN_DISABLE;
HAL_UART_Init(&UartHandle);
}
void serial_init(serial_t *obj, PinName tx, PinName rx)
{
// Determine the UART to use (UART_1, UART_2, ...)
UARTName uart_tx = (UARTName)pinmap_peripheral(tx, PinMap_UART_TX);
UARTName uart_rx = (UARTName)pinmap_peripheral(rx, PinMap_UART_RX);
// Get the peripheral name (UART_1, UART_2, ...) from the pin and assign it to the object
obj->uart = (UARTName)pinmap_merge(uart_tx, uart_rx);
MBED_ASSERT(obj->uart != (UARTName)NC);
// Enable USART clock + switch to SystemClock
if (obj->uart == UART_1) {
__USART1_CLK_ENABLE();
__HAL_RCC_USART1_CONFIG(RCC_USART1CLKSOURCE_SYSCLK);
obj->index = 0;
}
if (obj->uart == UART_2) {
__USART2_CLK_ENABLE();
__HAL_RCC_USART2_CONFIG(RCC_USART2CLKSOURCE_SYSCLK);
obj->index = 1;
}
if (obj->uart == UART_3) {
__USART3_CLK_ENABLE();
__HAL_RCC_USART3_CONFIG(RCC_USART3CLKSOURCE_SYSCLK);
obj->index = 2;
}
if (obj->uart == UART_4) {
__UART4_CLK_ENABLE();
__HAL_RCC_UART4_CONFIG(RCC_UART4CLKSOURCE_SYSCLK);
obj->index = 3;
}
if (obj->uart == UART_5) {
__UART5_CLK_ENABLE();
__HAL_RCC_UART5_CONFIG(RCC_UART5CLKSOURCE_SYSCLK);
obj->index = 4;
}
// Configure the UART pins
pinmap_pinout(tx, PinMap_UART_TX);
pinmap_pinout(rx, PinMap_UART_RX);
if (tx != NC) {
pin_mode(tx, PullUp);
}
if (rx != NC) {
pin_mode(rx, PullUp);
}
// Configure UART
obj->baudrate = 9600;
obj->databits = UART_WORDLENGTH_8B;
obj->stopbits = UART_STOPBITS_1;
obj->parity = UART_PARITY_NONE;
obj->pin_tx = tx;
obj->pin_rx = rx;
init_uart(obj);
// For stdio management
if (obj->uart == STDIO_UART) {
stdio_uart_inited = 1;
memcpy(&stdio_uart, obj, sizeof(serial_t));
}
}
void serial_free(serial_t *obj)
{
// Reset UART and disable clock
if (obj->uart == UART_1) {
__USART1_FORCE_RESET();
__USART1_RELEASE_RESET();
__USART1_CLK_DISABLE();
}
if (obj->uart == UART_2) {
__USART2_FORCE_RESET();
__USART2_RELEASE_RESET();
__USART2_CLK_DISABLE();
}
if (obj->uart == UART_3) {
__USART3_FORCE_RESET();
__USART3_RELEASE_RESET();
__USART3_CLK_DISABLE();
}
if (obj->uart == UART_4) {
__UART4_FORCE_RESET();
__UART4_RELEASE_RESET();
__UART4_CLK_DISABLE();
}
if (obj->uart == UART_5) {
__UART5_FORCE_RESET();
__UART5_RELEASE_RESET();
__UART5_CLK_DISABLE();
}
// Configure GPIOs
pin_function(obj->pin_tx, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
pin_function(obj->pin_rx, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
serial_irq_ids[obj->index] = 0;
}
void serial_baud(serial_t *obj, int baudrate)
{
obj->baudrate = baudrate;
init_uart(obj);
}
void serial_format(serial_t *obj, int data_bits, SerialParity parity, int stop_bits)
{
if (data_bits == 9) {
obj->databits = UART_WORDLENGTH_9B;
} else {
obj->databits = UART_WORDLENGTH_8B;
}
switch (parity) {
case ParityOdd:
case ParityForced0:
obj->parity = UART_PARITY_ODD;
break;
case ParityEven:
case ParityForced1:
obj->parity = UART_PARITY_EVEN;
break;
default: // ParityNone
obj->parity = UART_PARITY_NONE;
break;
}
if (stop_bits == 2) {
obj->stopbits = UART_STOPBITS_2;
} else {
obj->stopbits = UART_STOPBITS_1;
}
init_uart(obj);
}
/******************************************************************************
* INTERRUPTS HANDLING
******************************************************************************/
static void uart_irq(UARTName name, int id)
{
UartHandle.Instance = (USART_TypeDef *)name;
if (serial_irq_ids[id] != 0) {
if (__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_TC) != RESET) {
irq_handler(serial_irq_ids[id], TxIrq);
__HAL_UART_CLEAR_IT(&UartHandle, UART_FLAG_TC);
}
if (__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_RXNE) != RESET) {
irq_handler(serial_irq_ids[id], RxIrq);
volatile uint32_t tmpval = UartHandle.Instance->RDR; // Clear RXNE bit
}
}
}
static void uart1_irq(void)
{
uart_irq(UART_1, 0);
}
static void uart2_irq(void)
{
uart_irq(UART_2, 1);
}
static void uart3_irq(void)
{
uart_irq(UART_3, 2);
}
static void uart4_irq(void)
{
uart_irq(UART_4, 3);
}
static void uart5_irq(void)
{
uart_irq(UART_5, 4);
}
void serial_irq_handler(serial_t *obj, uart_irq_handler handler, uint32_t id)
{
irq_handler = handler;
serial_irq_ids[obj->index] = id;
}
void serial_irq_set(serial_t *obj, SerialIrq irq, uint32_t enable)
{
IRQn_Type irq_n = (IRQn_Type)0;
uint32_t vector = 0;
UartHandle.Instance = (USART_TypeDef *)(obj->uart);
if (obj->uart == UART_1) {
irq_n = USART1_IRQn;
vector = (uint32_t)&uart1_irq;
}
if (obj->uart == UART_2) {
irq_n = USART2_IRQn;
vector = (uint32_t)&uart2_irq;
}
if (obj->uart == UART_3) {
irq_n = USART3_IRQn;
vector = (uint32_t)&uart3_irq;
}
if (obj->uart == UART_4) {
irq_n = UART4_IRQn;
vector = (uint32_t)&uart4_irq;
}
if (obj->uart == UART_5) {
irq_n = UART5_IRQn;
vector = (uint32_t)&uart5_irq;
}
if (enable) {
if (irq == RxIrq) {
__HAL_UART_ENABLE_IT(&UartHandle, UART_IT_RXNE);
} else { // TxIrq
__HAL_UART_ENABLE_IT(&UartHandle, UART_IT_TC);
}
NVIC_SetVector(irq_n, vector);
NVIC_EnableIRQ(irq_n);
} else { // disable
int all_disabled = 0;
if (irq == RxIrq) {
__HAL_UART_DISABLE_IT(&UartHandle, UART_IT_RXNE);
// Check if TxIrq is disabled too
if ((UartHandle.Instance->CR1 & USART_CR1_TCIE) == 0) all_disabled = 1;
} else { // TxIrq
__HAL_UART_DISABLE_IT(&UartHandle, UART_IT_TC);
// Check if RxIrq is disabled too
if ((UartHandle.Instance->CR1 & USART_CR1_RXNEIE) == 0) all_disabled = 1;
}
if (all_disabled) NVIC_DisableIRQ(irq_n);
}
}
/******************************************************************************
* READ/WRITE
******************************************************************************/
int serial_getc(serial_t *obj)
{
USART_TypeDef *uart = (USART_TypeDef *)(obj->uart);
while (!serial_readable(obj));
if (obj->databits == UART_WORDLENGTH_8B) {
return (int)(uart->RDR & (uint8_t)0xFF);
} else {
return (int)(uart->RDR & (uint16_t)0x1FF);
}
}
void serial_putc(serial_t *obj, int c)
{
USART_TypeDef *uart = (USART_TypeDef *)(obj->uart);
while (!serial_writable(obj));
if (obj->databits == UART_WORDLENGTH_8B) {
uart->TDR = (uint8_t)(c & (uint8_t)0xFF);
} else {
uart->TDR = (uint16_t)(c & (uint16_t)0x1FF);
}
}
int serial_readable(serial_t *obj)
{
int status;
UartHandle.Instance = (USART_TypeDef *)(obj->uart);
// Check if data is received
status = ((__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_RXNE) != RESET) ? 1 : 0);
return status;
}
int serial_writable(serial_t *obj)
{
int status;
UartHandle.Instance = (USART_TypeDef *)(obj->uart);
// Check if data is transmitted
status = ((__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_TXE) != RESET) ? 1 : 0);
return status;
}
void serial_clear(serial_t *obj)
{
UartHandle.Instance = (USART_TypeDef *)(obj->uart);
__HAL_UART_CLEAR_IT(&UartHandle, UART_FLAG_TC);
__HAL_UART_SEND_REQ(&UartHandle, UART_RXDATA_FLUSH_REQUEST);
}
void serial_pinout_tx(PinName tx)
{
pinmap_pinout(tx, PinMap_UART_TX);
}
void serial_break_set(serial_t *obj)
{
UartHandle.Instance = (USART_TypeDef *)(obj->uart);
HAL_LIN_SendBreak(&UartHandle);
}
void serial_break_clear(serial_t *obj)
{
}
#endif

61
libraries/mbed/targets/hal/TARGET_STM/TARGET_NUCLEO_F303RE/sleep.c Normal file
View File

@ -0,0 +1,61 @@
/* mbed Microcontroller Library
*******************************************************************************
* Copyright (c) 2014, STMicroelectronics
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************
*/
#include "sleep_api.h"
#if DEVICE_SLEEP
#include "cmsis.h"
static TIM_HandleTypeDef TimMasterHandle;
void sleep(void)
{
TimMasterHandle.Instance = TIM2;
// Disable HAL tick interrupt
__HAL_TIM_DISABLE_IT(&TimMasterHandle, TIM_IT_CC2);
// Request to enter SLEEP mode
HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFI);
// Enable HAL tick interrupt
__HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_CC2);
}
void deepsleep(void)
{
// Request to enter STOP mode with regulator in low power mode
HAL_PWR_EnterSTOPMode(PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI);
// After wake-up from STOP reconfigure the PLL
SetSysClock();
}
#endif

329
libraries/mbed/targets/hal/TARGET_STM/TARGET_NUCLEO_F303RE/spi_api.c Normal file
View File

@ -0,0 +1,329 @@
/* mbed Microcontroller Library
*******************************************************************************
* Copyright (c) 2014, STMicroelectronics
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************
*/
#include "mbed_assert.h"
#include "spi_api.h"
#if DEVICE_SPI
#include <math.h>
#include "cmsis.h"
#include "pinmap.h"
#include "PeripheralPins.h"
static SPI_HandleTypeDef SpiHandle;
static void init_spi(spi_t *obj)
{
SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
__HAL_SPI_DISABLE(&SpiHandle);
SpiHandle.Init.Mode = obj->mode;
SpiHandle.Init.BaudRatePrescaler = obj->br_presc;
SpiHandle.Init.Direction = SPI_DIRECTION_2LINES;
SpiHandle.Init.CLKPhase = obj->cpha;
SpiHandle.Init.CLKPolarity = obj->cpol;
SpiHandle.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLED;
SpiHandle.Init.CRCPolynomial = 7;
SpiHandle.Init.DataSize = obj->bits;
SpiHandle.Init.FirstBit = SPI_FIRSTBIT_MSB;
SpiHandle.Init.NSS = obj->nss;
SpiHandle.Init.TIMode = SPI_TIMODE_DISABLED;
HAL_SPI_Init(&SpiHandle);
__HAL_SPI_ENABLE(&SpiHandle);
}
void spi_init(spi_t *obj, PinName mosi, PinName miso, PinName sclk, PinName ssel)
{
// Determine the SPI to use
SPIName spi_mosi = (SPIName)pinmap_peripheral(mosi, PinMap_SPI_MOSI);
SPIName spi_miso = (SPIName)pinmap_peripheral(miso, PinMap_SPI_MISO);
SPIName spi_sclk = (SPIName)pinmap_peripheral(sclk, PinMap_SPI_SCLK);
SPIName spi_ssel = (SPIName)pinmap_peripheral(ssel, PinMap_SPI_SSEL);
SPIName spi_data = (SPIName)pinmap_merge(spi_mosi, spi_miso);
SPIName spi_cntl = (SPIName)pinmap_merge(spi_sclk, spi_ssel);
obj->spi = (SPIName)pinmap_merge(spi_data, spi_cntl);
MBED_ASSERT(obj->spi != (SPIName)NC);
// Enable SPI clock
if (obj->spi == SPI_1) {
__SPI1_CLK_ENABLE();
}
if (obj->spi == SPI_2) {
__SPI2_CLK_ENABLE();
}
if (obj->spi == SPI_3) {
__SPI3_CLK_ENABLE();
}
// Configure the SPI pins
pinmap_pinout(mosi, PinMap_SPI_MOSI);
pinmap_pinout(miso, PinMap_SPI_MISO);
pinmap_pinout(sclk, PinMap_SPI_SCLK);
// Save new values
obj->bits = SPI_DATASIZE_8BIT;
obj->cpol = SPI_POLARITY_LOW;
obj->cpha = SPI_PHASE_1EDGE;
obj->br_presc = SPI_BAUDRATEPRESCALER_32;
obj->pin_miso = miso;
obj->pin_mosi = mosi;
obj->pin_sclk = sclk;
obj->pin_ssel = ssel;
if (ssel == NC) { // SW NSS Master mode
obj->mode = SPI_MODE_MASTER;
obj->nss = SPI_NSS_SOFT;
} else { // Slave
pinmap_pinout(ssel, PinMap_SPI_SSEL);
obj->mode = SPI_MODE_SLAVE;
obj->nss = SPI_NSS_HARD_INPUT;
}
init_spi(obj);
}
void spi_free(spi_t *obj)
{
// Reset SPI and disable clock
if (obj->spi == SPI_1) {
__SPI1_FORCE_RESET();
__SPI1_RELEASE_RESET();
__SPI1_CLK_DISABLE();
}
if (obj->spi == SPI_2) {
__SPI2_FORCE_RESET();
__SPI2_RELEASE_RESET();
__SPI2_CLK_DISABLE();
}
if (obj->spi == SPI_3) {
__SPI3_FORCE_RESET();
__SPI3_RELEASE_RESET();
__SPI3_CLK_DISABLE();
}
// Configure GPIOs
pin_function(obj->pin_miso, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
pin_function(obj->pin_mosi, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
pin_function(obj->pin_sclk, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
pin_function(obj->pin_ssel, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
}
void spi_format(spi_t *obj, int bits, int mode, int slave)
{
// Save new values
if (bits == 16) {
obj->bits = SPI_DATASIZE_16BIT;
} else {
obj->bits = SPI_DATASIZE_8BIT;
}
switch (mode) {
case 0:
obj->cpol = SPI_POLARITY_LOW;
obj->cpha = SPI_PHASE_1EDGE;
break;
case 1:
obj->cpol = SPI_POLARITY_LOW;
obj->cpha = SPI_PHASE_2EDGE;
break;
case 2:
obj->cpol = SPI_POLARITY_HIGH;
obj->cpha = SPI_PHASE_1EDGE;
break;
default:
obj->cpol = SPI_POLARITY_HIGH;
obj->cpha = SPI_PHASE_2EDGE;
break;
}
if (slave == 0) {
obj->mode = SPI_MODE_MASTER;
obj->nss = SPI_NSS_SOFT;
} else {
obj->mode = SPI_MODE_SLAVE;
obj->nss = SPI_NSS_HARD_INPUT;
}
init_spi(obj);
}
void spi_frequency(spi_t *obj, int hz)
{
// Values depend of APB1CLK and APB2CLK : 32 MHz if HSI is used, 36 MHz if HSE is used
if (obj->spi == SPI_1) {
if (hz < 500000) {
obj->br_presc = SPI_BAUDRATEPRESCALER_256; // 250 kHz - 280 kHz
} else if ((hz >= 500000) && (hz < 1000000)) {
obj->br_presc = SPI_BAUDRATEPRESCALER_128; // 500 kHz - 560 kHz
} else if ((hz >= 1000000) && (hz < 2000000)) {
obj->br_presc = SPI_BAUDRATEPRESCALER_64; // 1 MHz - 1.13 MHz
} else if ((hz >= 2000000) && (hz < 4000000)) {
obj->br_presc = SPI_BAUDRATEPRESCALER_32; // 2 MHz - 2.25 MHz
} else if ((hz >= 4000000) && (hz < 8000000)) {
obj->br_presc = SPI_BAUDRATEPRESCALER_16; // 4 MHz - 4.5 MHz
} else if ((hz >= 8000000) && (hz < 16000000)) {
obj->br_presc = SPI_BAUDRATEPRESCALER_8; // 8 MHz - 9 MHz
} else if ((hz >= 16000000) && (hz < 32000000)) {
obj->br_presc = SPI_BAUDRATEPRESCALER_4; // 16 MHz - 18 MHz
} else { // >= 32000000
obj->br_presc = SPI_BAUDRATEPRESCALER_2; // 32 MHz - 36 MHz
}
} else {
if (hz < 250000) {
obj->br_presc = SPI_BAUDRATEPRESCALER_256; // 125 kHz - 141 kHz
} else if ((hz >= 250000) && (hz < 500000)) {
obj->br_presc = SPI_BAUDRATEPRESCALER_128; // 250 kHz - 280 kHz
} else if ((hz >= 500000) && (hz < 1000000)) {
obj->br_presc = SPI_BAUDRATEPRESCALER_64; // 500 kHz - 560 kHz
} else if ((hz >= 1000000) && (hz < 2000000)) {
obj->br_presc = SPI_BAUDRATEPRESCALER_32; // 1 MHz - 1.13 MHz
} else if ((hz >= 2000000) && (hz < 4000000)) {
obj->br_presc = SPI_BAUDRATEPRESCALER_16; // 2 MHz - 2.25 MHz
} else if ((hz >= 4000000) && (hz < 8000000)) {
obj->br_presc = SPI_BAUDRATEPRESCALER_8; // 4 MHz - 4.5 MHz
} else if ((hz >= 8000000) && (hz < 16000000)) {
obj->br_presc = SPI_BAUDRATEPRESCALER_4; // 8 MHz - 9 MHz
} else { // >= 16000000
obj->br_presc = SPI_BAUDRATEPRESCALER_2; // 16 MHz - 18 MHz
}
}
init_spi(obj);
}
static inline int ssp_readable(spi_t *obj)
{
int status;
SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
// Check if data is received
status = ((__HAL_SPI_GET_FLAG(&SpiHandle, SPI_FLAG_RXNE) != RESET) ? 1 : 0);
return status;
}
static inline int ssp_writeable(spi_t *obj)
{
int status;
SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
// Check if data is transmitted
status = ((__HAL_SPI_GET_FLAG(&SpiHandle, SPI_FLAG_TXE) != RESET) ? 1 : 0);
return status;
}
static inline void ssp_write(spi_t *obj, int value)
{
SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
while (!ssp_writeable(obj));
if (obj->bits == SPI_DATASIZE_8BIT) {
// Force 8-bit access to the data register
uint8_t *p_spi_dr = 0;
p_spi_dr = (uint8_t *) & (spi->DR);
*p_spi_dr = (uint8_t)value;
} else { // SPI_DATASIZE_16BIT
spi->DR = (uint16_t)value;
}
}
static inline int ssp_read(spi_t *obj)
{
SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
while (!ssp_readable(obj));
if (obj->bits == SPI_DATASIZE_8BIT) {
// Force 8-bit access to the data register
uint8_t *p_spi_dr = 0;
p_spi_dr = (uint8_t *) & (spi->DR);
return (int)(*p_spi_dr);
} else {
return (int)spi->DR;
}
}
static inline int ssp_busy(spi_t *obj)
{
int status;
SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
status = ((__HAL_SPI_GET_FLAG(&SpiHandle, SPI_FLAG_BSY) != RESET) ? 1 : 0);
return status;
}
int spi_master_write(spi_t *obj, int value)
{
ssp_write(obj, value);
return ssp_read(obj);
}
int spi_slave_receive(spi_t *obj)
{
return ((ssp_readable(obj) && !ssp_busy(obj)) ? 1 : 0);
};
int spi_slave_read(spi_t *obj)
{
SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
while (!ssp_readable(obj));
if (obj->bits == SPI_DATASIZE_8BIT) {
// Force 8-bit access to the data register
uint8_t *p_spi_dr = 0;
p_spi_dr = (uint8_t *) & (spi->DR);
return (int)(*p_spi_dr);
} else {
return (int)spi->DR;
}
}
void spi_slave_write(spi_t *obj, int value)
{
SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
while (!ssp_writeable(obj));
if (obj->bits == SPI_DATASIZE_8BIT) {
// Force 8-bit access to the data register
uint8_t *p_spi_dr = 0;
p_spi_dr = (uint8_t *) & (spi->DR);
*p_spi_dr = (uint8_t)value;
} else { // SPI_DATASIZE_16BIT
spi->DR = (uint16_t)value;
}
}
int spi_busy(spi_t *obj)
{
return ssp_busy(obj);
}
#endif

70
libraries/mbed/targets/hal/TARGET_STM/TARGET_NUCLEO_F303RE/us_ticker.c Normal file
View File

@ -0,0 +1,70 @@
/* mbed Microcontroller Library
* Copyright (c) 2014, STMicroelectronics
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <stddef.h>
#include "us_ticker_api.h"
#include "PeripheralNames.h"
// 32-bit timer selection
#define TIM_MST TIM2
static TIM_HandleTypeDef TimMasterHandle;
static int us_ticker_inited = 0;
void us_ticker_init(void)
{
if (us_ticker_inited) return;
us_ticker_inited = 1;
TimMasterHandle.Instance = TIM_MST;
HAL_InitTick(0); // The passed value is not used
}
uint32_t us_ticker_read()
{
if (!us_ticker_inited) us_ticker_init();
return TIM_MST->CNT;
}
void us_ticker_set_interrupt(timestamp_t timestamp)
{
// Set new output compare value
__HAL_TIM_SetCompare(&TimMasterHandle, TIM_CHANNEL_1, (uint32_t)timestamp);
// Enable IT
__HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_CC1);
}
void us_ticker_disable_interrupt(void)
{
__HAL_TIM_DISABLE_IT(&TimMasterHandle, TIM_IT_CC1);
}
void us_ticker_clear_interrupt(void)
{
__HAL_TIM_CLEAR_IT(&TimMasterHandle, TIM_IT_CC1);
}