[WALLBOT_BLE] Add new platform

* Add new platform Wallbot BLE
* Identical as nRF51822 target, but different pinout

libraries/mbed/targets/hal/TARGET_NORDIC/TARGET_MCU_NRF51822/TARGET_WALLBOT_BLE/PinNames.h

@@ -0,0 +1,177 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2013 Nordic Semiconductor
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+    PIN_INPUT,
+    PIN_OUTPUT
+} PinDirection;
+
+typedef enum {
+    p0  = 0,
+    p1  = 1,
+    p2  = 2,
+    p3  = 3,
+    p4  = 4,
+    p5  = 5,
+    p6  = 6,
+    p7  = 7,
+    p8  = 8,
+    p9  = 9,
+    p10 = 10,
+    p11 = 11,
+    p12 = 12,
+    p13 = 13,
+    p14 = 14,
+    p15 = 15,
+    p16 = 16,
+    p17 = 17,
+    p18 = 18,
+    p19 = 19,
+    p20 = 20,
+    p21 = 21,
+    p22 = 22,
+    p23 = 23,
+    p24 = 24,
+    p25 = 25,
+    p26 = 26,
+    p27 = 27,
+    p28 = 28,
+    p29 = 29,
+    p30 = 30,
+
+    P0_0  = p0,
+    P0_1  = p1,
+    P0_2  = p2,
+    P0_3  = p3,
+    P0_4  = p4,
+    P0_5  = p5,
+    P0_6  = p6,
+    P0_7  = p7,
+
+    P0_8  = p8,
+    P0_9  = p9,
+    P0_10 = p10,
+    P0_11 = p11,
+    P0_12 = p12,
+    P0_13 = p13,
+    P0_14 = p14,
+    P0_15 = p15,
+
+    P0_16 = p16,
+    P0_17 = p17,
+    P0_18 = p18,
+    P0_19 = p19,
+    P0_20 = p20,
+    P0_21 = p21,
+    P0_22 = p22,
+    P0_23 = p23,
+
+    P0_24 = p24,
+    P0_25 = p25,
+    P0_26 = p26,
+    P0_27 = p27,
+    P0_28 = p28,
+    P0_29 = p29,
+    P0_30 = p30,
+
+    LED1  = p18,
+    LED2  = p19,
+    LED3  = p18,
+    LED4  = p19,
+
+    BUTTON1 = p16,
+    BUTTON2 = p17,
+
+    RX_PIN_NUMBER = p11,
+    TX_PIN_NUMBER = p9,
+    CTS_PIN_NUMBER = 31, // unused
+    RTS_PIN_NUMBER = 31, // unused
+
+    // mbed interface pins
+    USBTX = TX_PIN_NUMBER,
+    USBRX = RX_PIN_NUMBER,
+
+    SPI_PSELMOSI0 = p20,
+    SPI_PSELMISO0 = p22,
+    SPI_PSELSS0 = p24,
+    SPI_PSELSCK0 = p25,
+
+    SPI_PSELMOSI1 = p12,
+    SPI_PSELMISO1 = p13,
+    SPI_PSELSS1 = p14,
+    SPI_PSELSCK1 = p15,
+
+    SPIS_PSELMOSI = p12,
+    SPIS_PSELMISO = p13,
+    SPIS_PSELSS = p14,
+    SPIS_PSELSCK = p15,
+
+    LED_CONNECT = P0_18,
+    LED_MODE = P0_19,
+    OUT_LOW= P0_20,
+    SW1 = P0_16,
+    SW2 = P0_17,
+
+    R_PWM = P0_28,
+    R_IN1 = P0_30,
+    R_IN2 = P0_0,
+    L_PWM = P0_29,
+    L_IN1 = P0_23,
+    L_IN2 = P0_24,
+
+    MMC_SCK = P0_15,
+    MMC_CS = P0_14,
+    MMC_SDO = P0_13,
+    MMC_SDI = P0_12,
+
+    R_ENC1 = P0_8,
+    R_ENC2 = P0_10,
+    L_ENC1 = P0_6,
+    L_ENC2 = P0_7,
+
+    P1IN = P0_2,
+    P2IN = P0_3,
+    P3IN = P0_4,
+    P4IN = P0_5,
+
+    I2C_SCL = P0_21,
+    I2C_SDA = P0_22,
+
+    // Not connected
+    NC = (int)0xFFFFFFFF
+
+} PinName;
+
+typedef enum {
+    PullNone = 0,
+    PullDown = 1,
+    PullUp = 3,
+    PullDefault = PullUp
+} PinMode;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

libraries/mbed/targets/hal/TARGET_NORDIC/TARGET_MCU_NRF51822/TARGET_WALLBOT_BLE/device.h

@@ -0,0 +1,57 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_DEVICE_H
+#define MBED_DEVICE_H
+
+#define DEVICE_PORTIN           1
+#define DEVICE_PORTOUT          1
+#define DEVICE_PORTINOUT        1
+
+#define DEVICE_INTERRUPTIN      1
+
+#define DEVICE_ANALOGIN         1
+#define DEVICE_ANALOGOUT        0
+
+#define DEVICE_SERIAL           1
+
+#define DEVICE_I2C              1
+#define DEVICE_I2CSLAVE         0
+
+#define DEVICE_SPI              1
+#define DEVICE_SPISLAVE         1
+
+#define DEVICE_CAN              0
+
+#define DEVICE_RTC              0
+
+#define DEVICE_ETHERNET         0
+
+#define DEVICE_PWMOUT           1
+
+#define DEVICE_SEMIHOST         0
+#define DEVICE_LOCALFILESYSTEM  0
+
+#define DEVICE_SLEEP            1
+
+#define DEVICE_DEBUG_AWARENESS  0
+
+#define DEVICE_STDIO_MESSAGES   0
+
+#define DEVICE_ERROR_PATTERN    1
+
+#include "objects.h"
+
+#endif

workspace_tools/build_release.py

@@ -73,6 +73,7 @@ OFFICIAL_MBED_LIBRARY_BUILD = (
     ('ARCH_BLE',     ('ARM', 'GCC_ARM')),
     ('RBLAB_NRF51822', ('ARM', 'GCC_ARM')),
     ('RBLAB_BLENANO', ('ARM', 'GCC_ARM')),
+    ('WALLBOT_BLE',  ('ARM', 'GCC_ARM')),
 
     ('LPC11U68',     ('uARM','GCC_ARM','GCC_CR')),
     ('OC_MBUINO',     ('ARM', 'uARM', 'GCC_ARM')),

workspace_tools/targets.py

@@ -717,6 +717,11 @@ class XADOW_M0(LPCTarget):
         self.supported_toolchains = ["ARM", "uARM", "GCC_ARM", "GCC_CR"]
         self.default_toolchain = "uARM"
 
+class WALLBOT_BLE(NRF51822):
+    def __init__(self):
+        NRF51822.__init__(self)
+        self.extra_labels = ['NORDIC', 'MCU_NRF51822', 'MCU_NORDIC_16K']
+        self.macros = ['TARGET_NRF51822']
 
 ### ARM ###
 
@@ -802,6 +807,7 @@ TARGETS = [
     RBLAB_NRF51822(),# nRF51822
     RBLAB_BLENANO(),# nRF51822
     XADOW_M0(),     # nRF51822
+    WALLBOT_BLE(),  # nRF51822
     
     ### ARM ###
     ARM_MPS2(),