7b4f177cdb
remove older target
2015-01-27 14:56:59 +08:00
4a52c80ef5
solve conflict targets.py and i2c_api.c
...
Merge remote-tracking branch 'upstream/master'
Conflicts:
libraries/mbed/targets/hal/TARGET_NORDIC/TARGET_MCU_NRF51822/i2c_api.c
workspace_tools/targets.py
2015-01-27 14:16:17 +08:00
ea2a3c27a0
Assigned a value to pin variable
2015-01-26 21:47:28 +01:00
1fca34a068
HAL - NRF51822 - us ticker fix for the #839
...
There was a project header file which does not exist in mbed SDK, neither
some defines used from it most probably. This commit reverts those parts.
2015-01-26 15:32:14 +01:00
e979bd60eb
Merge pull request #839 from rgrover/master
...
switching timestamp_t back to 32-bits.
2015-01-26 15:13:08 +01:00
8c50826562
Removed extra checks for operator[] and replaced them with MBED_ASSERT for cleaner code
2015-01-26 08:47:44 +00:00
2c2ab2cb06
Merge pull request #861 from NitinBhaskar/master
...
On-Board SD Card support for LPC11U37H_401 board
2015-01-26 06:46:38 +00:00
3b7d9635b7
I2C blockread and blockwrite fixed for LPC812
...
Quick fix of block read and write. The i2c_start is still wrong: it
should setup the address before initiating a Start condition. Status
read is also wrong in i2c_do_read.
2015-01-24 20:59:01 +01:00
19fd60321b
On-Board SD Card support added, SD Card related test cases updated too
2015-01-24 22:57:01 +05:30
627714908d
Removed the mbed_mac_address override as it is not needed on the LPC4088_DM
2015-01-24 12:33:02 +01:00
66a5f716e3
modify i2c_api, analog_api, system_brf51822.c, targets/py and add device.h, PinNames
2015-01-23 16:40:26 +08:00
cb36f2c472
[NUCLEO_F303RE] Update SetSysClock function
2015-01-22 11:10:09 +01:00
4a2f3e00fe
Fixed review comments
2015-01-21 10:22:02 +01:00
cbebd63a2c
Added LPC4088_DM HAL
2015-01-21 10:19:35 +01:00
b223f83441
Updated gpio irq hal with max num of irq
...
- EXTI lines 5 to 9
- EXTI lines 10 to 15
2015-01-20 21:40:05 +01:00
8fe645ecd1
Merge branch 'master' of https://github.com/mbedmicro/mbed
2015-01-20 13:14:59 +01:00
5e57cd3d29
[NUCLEO_F303RE] Add GCC_ARM toolchain
2015-01-20 13:10:22 +01:00
0ab8d2e6b3
Merge pull request #844 from masaohamanaka/master
...
RZ_A1H - Implement some USB functions and fix some bugs about USBHost common codes.
2015-01-19 14:25:26 +00:00
befdc7ae6b
Merge pull request #847 from ytsuboi/master
...
LPC1114 - remove reset pin name to protect people. [LPC824] I2C pin names were crossed
2015-01-19 12:54:52 +00:00
5c5232c36a
Merge pull request #850 from NitinBhaskar/master
...
Initial support for LPC11U37H_401
2015-01-19 12:52:04 +00:00
f38d985cc8
Initial support for LPC11U37H_401
2015-01-17 13:29:17 +05:30
c1307163b3
Fixes to get LPC4330 GCC based builds to run
...
I was getting Hard Faults in even the simplest of samples before I made
these fixes.
* WaitUs() did nothing on optimized builds. I added the volatile
qualifier to the cyc variable to make sure that the delay loop
doesn't get optimized out.
* I removed the #ifdef which skipped the fpuInit() call when building
with GCC.
2015-01-16 15:58:55 -08:00
5b8a42ffe9
[LPC824] I2C pin names were crossed
2015-01-17 01:33:22 +09:00
7c55ec9590
[LPC1114] remove reset pin name to protect people.
...
If user set P0_0 as DigitalOut and set it to low, LPC1114 will be in
reset condion. To avoid this situation, p4, xp4 and dp23 was removed
from PinNames.h.
2015-01-17 00:41:17 +09:00
e21c65041d
New platform - Teensy 3.1
2015-01-15 19:18:01 +00:00
7726496957
Implement some USB functions to RZ-A1H
...
Implemented functions as below.
- USB Host
- USB Device(Full speed)
2015-01-15 14:00:42 +09:00
fb2ed14768
[NUCLEO_F303RE] Correct ADC initialization
...
Same as #809
2015-01-12 16:30:05 +01:00
7a3d2b4423
Merge pull request #837 from bcostm/master
...
NUCLEO_F070RB - Update tests
2015-01-12 08:14:44 +00:00
47725f9123
Merge pull request #835 from masaohamanaka/master
...
RZ_A1H - Fix some bugs about InterruptIn, SPI, I2C and modify some settings.
2015-01-12 08:14:02 +00:00
c8b9b9c2f5
add a declaration for the signed version of timestamp_t; used in a comparison
2015-01-12 07:58:31 +00:00
f7a78073e8
add 1 to the scheduler-op pool to allow deleting a timer whilst in its handler.
...
Please note that this commit goes with another recent commit to the nRF51822 repository which updated values under projectconfig.h. Please remember to update nRF51822 as well.
This has a bearing on issue #832 .
2015-01-09 13:19:55 +00:00
e7a9c01708
update us_ticker_appTimerRunning after a call to app_timer_stop()
2015-01-09 12:43:18 +00:00
c18633dcf2
switching timestamp_t back to 32-bits.
...
The underlying us_tickers used for comparison are still 32-bits; keeping a 64-bit timestamp isn't going to be useful.
fixes #838
2015-01-09 12:42:55 +00:00
321f012f06
[NUCLEO_F070RB] Add missing line (same as F072RB)
2015-01-09 11:32:49 +01:00
4004624a1f
Add comments.
...
Add comments to provide details about this code.
2015-01-09 13:50:41 +09:00
2acefb66eb
Merge pull request #809 from bcostm/master
...
NUCLEO_F334R8 - Fix issue with multiple ADC initialization
2015-01-08 11:57:52 +00:00
bef46907fc
Merge pull request #831 from ohagendorf/stm32f4xx_reorg_hal
...
STM32F4xx reorganisation of hal folder
2015-01-08 11:53:03 +00:00
90cf47ffdf
Fix some bugs about IntreruptIn.
...
Bugs are as below.
- Add terminal setting of IRQ4 and IRQ6 that leaked.
- When set the interrupt function by rise()/fall(), the interrupt disable state will be released by disable_irq().
- Interrupt will be continued to occur when execute disable_irq() after rise(NULL)/fall(NULL) set.
- Fix the setting timing of PMC register.
2015-01-07 19:11:14 +09:00
f119a368e5
Fix the bug that a noise will occur in SPI.
...
A noise will occur when execute frequency() after set the "mode" to 3 by format().
2015-01-07 19:10:49 +09:00
b13b047a76
Implement a stop condition transmission setting function of I2C.
...
User can specify the sending of STOP condition by this implement.
2015-01-07 19:10:26 +09:00
808c3b4d7c
Take measures about optimization problems of web compiler.
2015-01-07 19:09:22 +09:00
0ed93c1953
Update scatter file to increase usable RAM area.
...
Remove a usable RAM area limit of RW and ZI area.
2015-01-07 13:04:49 +09:00
d068a2b479
Replaced const define with hardcoded bus size of 16
2015-01-06 08:42:49 +00:00
7d54c82331
* Changed Bus operator[]() parameter from unsigned int to int to match mbed code
...
guidelines.
* Uncommented assertions in operators and added check for operator[] index < 0.
* Moved one operator from private to public, this was a typo thing.
2015-01-06 08:33:24 +00:00
716c51d232
Deleting doubled files
2015-01-06 00:35:57 +01:00
f5c3b18d75
[NUCLEO_F091RC] adding exporter (gcc_arm, coide), enable rtos
...
- Adding exporter for CoIDE and GCC_ARM
- Adding target to RTOS lib
2015-01-05 22:55:18 +01:00
5ebdb92e78
[NUCLEO_F072RB] adding target to rtos lib
...
Every test (DTCT_1, EXAMPLE_1, MBED_xx, RTOS_x) is OK.
2015-01-05 22:43:52 +01:00
f2a6eeca8d
[NUCLEO_F334R8] Correct the code used during initialization
2015-01-05 14:47:38 +01:00
ad9b6a7119
Merge branch 'master' of https://github.com/mbedmicro/mbed
2015-01-05 14:14:41 +01:00
914dd37b11
Merge pull request #818 from ohagendorf/stm32l053_rtos
...
DISCO/NUCLEO_L053xx - adding to RTOS, corrections for all tests, [DISCO_L053] exporter to µVision
2015-01-05 08:08:00 +01:00
e1309e658a
Merge pull request #811 from albert361/master
...
Add IAR toolchain support for DISCO_F429ZI
2015-01-05 07:57:36 +01:00
3aef1389d5
Merge pull request #829 from Kazu-zamasu/LPC824-GCC_CR
...
Tools: LPC824 - GCC_CR support
2015-01-05 07:55:21 +01:00
f98dd149b9
[MTS_MDOT_F405RG] reorg hal folder
...
- reorganisation of this target needed some extension of serial_api.c
used by all F4xx tagets.
- add arch_max to travis_build
2015-01-04 14:15:16 +01:00
0498e2619b
[STMF4xx] reorg hal folder
...
- some minor error correction
- add pin definition for 3 tests (MBED_A5,6,7)
- add new target disco_f401vc to travis_build
travis_build and all test are OK except missing STM32F4 target
MTS_MDOT_F405RG
2015-01-04 14:14:52 +01:00
3d886a94dc
[MTS_DRAGONFLY_F411RE] reorg hal folder
2015-01-04 14:11:32 +01:00
41975149c2
[DISCO_F407/ARCH_MAX] reorg hal folder
2015-01-04 14:11:03 +01:00
3a2ec50d0e
[DISCO_F429ZI] reorg hal folder
2015-01-04 14:10:34 +01:00
cf8c8689e6
[NUCLEO_F411][MTS_MDOT_F411] reorg of hal folder
2015-01-04 14:07:43 +01:00
484d9359ba
[DISCO/NUCLEO_F401xx] reorg of hal folder
2015-01-04 14:06:51 +01:00
b066ebff90
Add to GCC_CR
...
New create GCC_CR LPCXPresso export.
2015-01-04 12:02:01 +09:00
43e6502f00
[DISCO_F401VC] new target incl. exporter to gcc_arm and coide
2015-01-02 19:09:41 +01:00
ad6e208c7e
[DISCO_L053xx] RTC LSE/LSI problem
...
The mcu STM32L053C8 seems to have a problem in the RCC - LSE hardware
block. The Disco_L053 don't have a 32kHz crystal connected to LSE port
pins in contrast to NUCLEO_L053.
During initialization the HAL tests if it can start the LSE oscillator.
The Flag LSERDY in RCC_CSR is set to 1 by RCC clock control when the
oscillator runs stable. Without a crystal the flag shouldn't be set and
the HAL trys to start the internal LSI oscillator.
But the flag is always set to 1 also without a crystal. That's why the
RTC doesn't start.
2015-01-02 12:17:35 +01:00
32f5b97aa7
[DISCO_L053xx] wrong STDIO UART
...
Correction of a wrong stdio uart - some tests failed because of this.
2015-01-02 12:17:35 +01:00
0ac123d488
[DISCO/NUCLEO_L053xx] adding to RTOS
2015-01-02 12:13:44 +01:00
d198fba547
Merge pull request #821 from ohagendorf/exporter_coide_gccarm
...
NUCLEO/DISCO L053,F103,F100,F051 - adding exporter to gcc_arm and coide
2015-01-02 09:04:06 +01:00
7234182bfd
Merge pull request #817 from masaohamanaka/master
...
RZ_A1H - Modify frequency setting processing of SPI
2015-01-02 08:26:57 +01:00
77d645476d
Merge pull request #810 from ohagendorf/STM32F3xx_rtos
...
DISCO/NUCLEO_F3xx - solving RTOS problem
2015-01-02 07:48:54 +01:00
9af828a11f
Merge branch 'master' of https://github.com/mfiore02/mbed into mfiore02-master
...
Conflicts:
workspace_tools/build_travis.py
2015-01-02 07:12:11 +01:00
aaede9c070
[DISCO_F051R8] exporter to coide and a naming correction
...
In PeripheralNames.h the PWM timer name was wrong. Changed from TIMxx to
PWMxx.
2014-12-31 17:46:32 +01:00
020faf70e6
Fix icf settings for head and stack size
2014-12-30 22:55:11 +08:00
6126cb7b41
Modify frequency setting processing of SPI
...
In case of off-line compiler, there is no problem about the frequency setting processing.
But in case of online compiler, the frequency setting processing will be error.
So, modify frequency setting processing of SPI to pass in online compiler.
2014-12-26 17:40:42 +09:00
2f63fa7d78
Merge pull request #815 from toyowata/master
...
Targets: LPC4337 - Fix RTC clock setting issue
2014-12-25 19:35:15 +01:00
7b62e7d5d6
[LPC4337] Remove init variable for RTC
...
- Remove static variable for initialization check
- Add enabled flag check for RTC control register
2014-12-25 09:41:33 +09:00
44c66b1062
[LPC4337] Fix RTC clock setting issue
...
- Fixed missing RTC clock intialization code
- Confirm to pass RTC test case (MBED_16)
2014-12-24 18:09:47 +09:00
21b2445fad
Fix typo.
...
1AB -> 1AF
2014-12-24 11:18:35 +08:00
3fdeca703c
Fix NVIC memory region and rtos verified
...
1. Add NVIC region in icf file.
2. Increase STACK and HEAP size.
3. mBed rtos is verified.
2014-12-24 11:16:26 +08:00
a1653f2708
Fix KL05Z GCC_ARM linker script
...
Issue originally reported on mbed site here:
https://developer.mbed.org/questions/5695/FRDM-KL05z-hardfault-when-compiled-with-/
The RAM base address was incorrectly set to the beginning of RAM
instead of at a 0xC0 byte offset to reserve room for the interrupt
vectors. Without this fix, the global variables and the interrupt
vectors were occupying the same space in RAM once the user enabled the
timer interrupt.
The user who originally reported the issue on the mbed site has tested
this fix and verified that it corrected the hard fault issue that they
were encountering.
2014-12-23 19:03:09 -08:00
282c31f57e
Add IAR toolchain support for DISCO_F429ZI
2014-12-23 14:41:20 +08:00
e48aabed4c
[DISCO/NUCLEO_F3xx] solving RTOS Problem
...
- add targets (except DISCO_F303VC) to tests.py - RTOS_x tests
- a minor bug fix for DISCO_F334: had wrong STDIO_UART_TX/RX pin
settings
2014-12-22 16:58:42 +01:00
ef626d7f68
[NUCLEO_F334R8] Fix issue with multiple ADC initialization
2014-12-22 11:04:02 +01:00
4dd46fd82a
Merge branch 'master' of https://github.com/mbedmicro/mbed
2014-12-22 08:40:08 +01:00
56e7514495
Modiffied _ns_mack member's comment in Bus classes (BusIn, BusOUt, BusInOut)
2014-12-19 14:59:06 +00:00
8690af3b7b
Simple indent
2014-12-19 14:53:35 +00:00
11c5955959
Simple indent
2014-12-19 14:48:39 +00:00
7720989e20
Added operator[] and mask() function to BusInOut
...
This change follows changes in BUsIn and BusOUt API
2014-12-19 14:45:32 +00:00
db7e92853b
Added mask() function to BusIn and BusOut components
...
You can use BusIn::mask() or BusOut::mask() to get binary mask of all connected and NC pins in bus
2014-12-19 14:37:00 +00:00
c4fc8e68eb
Added operator[] for BusIn and BusOut to add access to particular bit in random-iterator fashion
2014-12-19 14:06:46 +00:00
6fa4b469f4
Decorated all HALs with gpio_is_connected() function implementation
2014-12-19 13:37:16 +00:00
a53cd59b51
Added is_connected() method to Digital I/O classes APIs (DigitalIn, DigitalOut and DigitalInOut
2014-12-19 13:31:54 +00:00
b7f4d17aae
Added new GPIO HAL function gpio_is_connected() used to check if gpio_t is connected or initialized with NC
...
Simple gpio_t structure in TARGET_KPSDK_MCUS field name changed to allign to other HALs
2014-12-19 13:14:53 +00:00
03f49ea8ef
[NUCLEO_F0] Align registers and system files with latest CMSIS files
...
Same as in new NUCLEO_F070RB target
2014-12-19 14:13:54 +01:00
bd803e5944
Merge pull request #805 from molejar/dev-freescale-kl43z
...
Targets: KL43Z - Fix some issues in serial, usb device and pins names
2014-12-19 11:10:08 +00:00
1eb8d7cab4
Added serial_get_src_clock() function into serial_api.c and fastirc_frequency() function into clk_freqs.h for better portability.
2014-12-19 10:55:37 +01:00
79ec104b3c
Merge pull request #801 from bcostm/master
...
Add new target - NUCLEO_F070RB
2014-12-19 09:48:14 +00:00
078c36b1c5
Merge pull request #802 from masaohamanaka/master
...
Targets: RZ_A1H - Fix some drivers bugs and modify some settings of OS and
2014-12-19 08:53:10 +00:00
e8f8f5ef6b
Merge pull request #803 from mazgch/master
...
fix HAL_NULL, add more GPIO_CLK macros
2014-12-19 08:32:48 +00:00
bb969921ec
Fixed baudrate calculation issue in serial_api.c, arduino compatible pins name and USB device for Freescale KL43Z Target
2014-12-18 22:37:11 +01:00
992afded5c
fix HAL_NULL, add more GPIO_CLK macros
2014-12-18 16:11:40 +01:00
0279c2a2ee
Modify some settings of OS and Ether
...
- Change default setting of CMSIS-RTOS RTX for Cortex-A9 to align with Cortex-M.
- Change the interrupt priority of Ether driver to align with other drivers.
2014-12-18 18:41:33 +09:00
e91e953a60
Fix some drivers bugs.
...
Changes as below.
-I2C
Change communication wait time and Frequency accuracy improvement of I2C.
- Frequency accuracy improvement
- Changed the wait time between one communication completed and the next communication start.
The wait time will be Low clock width by this changing.
-PWM
Modify processing of pulsewidth() of PWM
- Modify processing of pulsewidth() to match the specifications of the RZ_A1H.
-SPI
Fixed a bug that SPI driver is not able to communicate when transfer bit length is 16bit or 32bit.
- Frequency accuracy improvement
- Modify transfer processing when transfer bit length is 16bit or 32bit.
-Serial
Change the reference register macro of Serial
- Change the reference register macro to align with other driver codes.
2014-12-18 18:40:44 +09:00
6234082237
[NUCLEO_F070RB] Add new target - part 2 hal
2014-12-18 09:29:13 +01:00
796482d826
[NUCLEO_F070RB] Add new target - part 1 cmsis
2014-12-18 09:28:22 +01:00
97089befb4
[STM32F0] Update STM32Cube driver to support new devices
2014-12-18 09:26:02 +01:00
8d2fa50691
add new target BLE_SMURFS
2014-12-17 11:40:09 +08:00
2ef2204380
solving RTOS problem
...
Changing original STM Cube Driver to call _start instead of main to
initialise the rtos when using it. Without using rtos the behavior is
the same as before.
2014-12-17 01:18:56 +01:00
67fbbf0b63
Merge pull request #798 from rgrover/master
...
Targets: nrf51 - updating app_timer.c from Norid'c SDKv7.1.0
2014-12-16 08:14:11 +00:00
a67faf521f
Merge pull request #797 from ohagendorf/DISCO_F429_clockcycle
...
Targets: DISCO_F429ZI - clock frequency additions
2014-12-16 08:01:54 +00:00
7eb385ec41
[DISCO_F429ZI] changed clock settings
...
Correction of wrong comments.
2014-12-15 22:37:37 +01:00
429ff2731d
[mbed][MTS_DRAGONFLY_F411RE] fix reversed uart pins after rebasing from master
2014-12-15 15:05:07 -06:00
29bd94927e
updating app_timer.c from Norid'c SDKv7.1.0; hoping to fix the hangs reported around timers
2014-12-15 15:59:48 +00:00
6172cbea1a
Merge pull request #785 from rosterloh/disco_l053_hal_updates
...
Targets: DISCO_L053C8 - update from nucleo latest changes
2014-12-15 09:15:42 +00:00
1fb5426bf6
Merge pull request #793 from ohagendorf/STMF4xxx_rtos
...
DISCO_F4xx, NUCLEO_F4xx, MDOT_F4 - fix RTOS problem (init seq)
2014-12-15 09:01:35 +00:00
fb526c9205
Merge pull request #784 from masaohamanaka/master
...
Targets: RZ_A1H - Add the timer value wraparound processing to us_ticker
2014-12-15 08:55:35 +00:00
5aafaa0d63
Merge pull request #780 from GustavWi/iar_mbed
...
IAR: skip dynamic initialization, new common IAR startup file
2014-12-15 08:52:35 +00:00
2002b797ad
[DISCO_F429ZI] changed clock settings
...
Original STM32Cube F4 driver sets SYSCLK for STM32F429 to 16MHz. This
adds a 168MHz and 180MHz configuration to system_stm32f4xx.c generated
by STM32CubeMX code generator. The rtos clock configuration is changed
too. In singletest.py run everything is OK.
2014-12-15 07:32:53 +01:00
6f8f626bd6
[DISCO_F4xx][NUCLEO_F4xx][MDOT_F4] solving RTOS problem
...
- Changing original STM Cube Driver to call _start instead of main to
initialise the rtos when using it. Without using rtos the behavior is
the same as before.
- Adding DISCO_F429 to rtos
- Adding targets to RTOS_xx tests.
- All tests are OK. Tested with Nucleo and Disco boards. Not tested with
MDOT_F4 but that uses the same hal like nucleo_f411.
2014-12-13 22:50:02 +01:00
3212848c31
Fix a bug that coding mistakes of L2 cache
...
Coding mistakes as below.
while(PL310->INV_WAY && ((1 << assoc) - 1)); ->
while(PL310->INV_WAY & ((1 << assoc) - 1));
PL310->INTERRUPT_CLEAR = 0; ->
PL310->INTERRUPT_CLEAR = 0x000001FFuL;
2014-12-12 14:27:01 +09:00
8e3b9aba75
Add terminal defines of PWM and fix a bug that period can not be changed.
...
Fix a bug as below.
- Period can not be changed.
Restructions: 1. The upper limits is 491us
2. Change all period of the same channel when changing period.
2014-12-12 14:26:33 +09:00
fc7e246596
Remove needless processing regarding Interrupt.
...
EOIR writing will be done in IRQ handler.
EOIR writing is needless in each interrupt processing.
2014-12-12 14:25:41 +09:00
7417e1061d
Add some terminal setting of Serial and modify attach sequence.
...
Fix some bugs of Serial as below.
- TX/RX terminal of XBee(P7_4, P7_5) setting is reverse.
- P5_6 and P5_7 terminals can not be used.
- Tx interrupt will not occur at the right timing.
- There are no settings of WIFI Module terminals(P11_10,P11_11).
- There are no settings of Xbee Module terminals(P6_6,P6_7).
2014-12-12 14:25:08 +09:00
22a3c528c8
[mbed][MTS_DRAGONFLY_F411RE] remove old Dragonfly Directory
2014-12-11 14:02:13 -06:00
883215c80e
Merge branch 'dev_new' into dev
...
Conflicts:
workspace_tools/export/iar.py
workspace_tools/targets.py
2014-12-11 13:54:19 -06:00
743bf2b255
[mbed][MTS_DRAGONFLY_F411RE MTS_MDOT_F411RE NUCLEO_F411RE] remove unnecessary Dragonfly hal files & move PeripheralNames.h to mDot and Nucleo dirs to perserve differences from Dragonfly
2014-12-11 13:48:06 -06:00
83d03f35e5
[mbed][MTS_DRAGONFLY_F411RE] move Dragonfly support into TARGET_STMF411RE with rest of 411 products
2014-12-11 13:38:29 -06:00
4ade9b7ac3
[mbed][MTS_DRAGONFLY_F411RE] fix D2 pin mapping, remove PWM_OUT from PinNames.h
2014-12-11 13:20:45 -06:00
ff0b8fce30
[cmsis][MTS_DRAGONFLY_F411RE] set USE_PLL_HSE_EXTC to 0, causing problems with IAR export and we have no external clock option
2014-12-11 13:20:45 -06:00
2a5c204fa2
[mbed][MTS_DRAGONFLY_F411RE] fix pin names for spi to external flash
2014-12-11 13:20:45 -06:00
4b1ac52d91
[mbed][MTS_DRAGONFLY_F411RE] change wrong PLL members to correct values from ST Cube code
2014-12-11 13:20:45 -06:00
7a217c3fb5
[mbed][MTS_DRAGONFLY_F411RE] remove unnecessary VIMPINNAMES file
2014-12-11 13:20:45 -06:00
340b40ff1a
[mbed][MTS_DRAGONFLY_F411RE] add RADIO_TX/RX pins, correct reversed TX/RX pins for uart6
2014-12-11 13:20:45 -06:00
f41a29e14c
[mbed][MTS_DRAGONFLY_F411RE] clean up PinNames.h
2014-12-11 13:20:45 -06:00
6d9d5961c5
[mbed][MTS_DRAGONFLY_F411RE] fix stdio uart decl, fix D3 pin decl, change blinky test main.cpp back to original
2014-12-11 13:20:45 -06:00
546005a72c
[mbed][MTS_DRAGONFLY_F411RE] added platform support files and dirs built gcc executable NOT working
2014-12-11 13:20:45 -06:00
77c3fe2358
updated latest changes from nucleo
2014-12-11 14:55:45 +00:00
c08208fe4f
Update upstream pushed files
2014-12-11 19:26:03 +09:00
54999646a1
[NUCLEO_L053R8] Removed call to Systick (mbed RTOS compliancy)
2014-12-11 11:16:02 +01:00
1970328da3
Add the timer value wraparound processing to us_ticker
...
Timer value wraparound operation had not been considered in us_ticker.
So, User could not set upper than 128s to argument of wait().
2014-12-11 19:07:50 +09:00
f71b0a06c7
Revert "Add the timer value wraparound processing to common wait processing"
...
This reverts commit cd8f65c94b
2014-12-11 18:21:43 +09:00
b75dadac6c
Merge pull request #779 from ndelisi/master
...
Y5Design LPC11U35 and NRF51822 - Add New targets
2014-12-11 08:28:29 +00:00
cd8f65c94b
Add the timer value wraparound processing to common wait processing
...
Timer value wraparound operation had not been considered in common wait process.
By defining the EXPIRE_US non-zero value, wraparound operation is enabled.
The EXPIRE_US will be define the value of each vender-specific.
If EXPIRE_US is 0, the common wait process is same as before.
2014-12-11 14:32:09 +09:00
c3393b80b1
Merge remote-tracking branch 'upstream/master' into iar_mbed
2014-12-10 13:41:46 +01:00
3062999e97
Separated the c data initialization and c++ to call mbed_sdk_init before c++ data. So that the c variables are updated before the c++ objects are initialized. Had to rename the cmain override in RTX_CM_lib.h to __iar_program_start because there can not be two __cmain overrides in the project. The ewps had to be updated to add the linker command --skip_dynamic_initialization which stalls the c++ data init until __iar_dynamic_initialization which is called right after mbed_sdk_init.
2014-12-10 13:40:17 +01:00
2e1ba4df65
Merge pull request #777 from GustavWi/iar_mbed
...
Targets: CMSIS - Fixed linker files for IAR (Ram size on one) and for the rest increased the heap...
2014-12-10 08:49:10 +00:00
91a77d74cf
With the old logic if Serial::writeable() was called before and/or used to block calls to Serial::putc() it would never write due to EVENT_TXDRDY trailing a write to TXD. Add a dummy write to TXD before pins are connected to the peripheral. This primes the EVENT_TXDRDY to lead future writes rather than trail. Since STOPTX isn't used this seems safe.
2014-12-09 17:48:10 -06:00
a03d3bcd8d
Porting of new target: Added new target to target.py, added header files for PinNames.h and device.h
...
nRF51822 from Nordic Semiconductor
Bluetooth Low-Energy v4.1 compliant - interface to smartphones, tablets
System-on-Chip (SoC) solution - easily transformable into a deployable solution
Drop-in solution for production - no need to design your own antenna
FCC and CE Certified
3x LEDs, 3x Buttons
Powered by interface board or external 3.3V
2014-12-09 14:08:22 -06:00
f382af4aed
Porting of new target: Added new target to target.py, added header files for PinNames.h and device.h. Added linker library.
...
Y5 Design LLC Interface Board
LPC11u35 from NXP
Low Power, ARM(r) Cortex-M0 suitable for a wide range of applications
On-Chip Bootloader - In-System programming (ISP) and in-application programming (IAP)
ROM-based USB drivers - Flash updates via USB supported
SPI, GPIO, i2C, UART, ADC
3x LEDs, Reset Button
3.3V powered via USB or external
USB interface - shipped with USB-A, male connector, pads for Micro female
2014-12-09 13:01:20 -06:00
490dd0ddfe
Fixed linker files (Ram size on one) and for the rest increased the heap and stack size
2014-12-09 18:37:01 +01:00
a36eb12b2f
Targets: Freescale KSDK - extern } syntax error fix
2014-12-09 14:52:17 +00:00
ea49132428
Merge pull request #770 from GustavWi/iar_mbed
...
Fix IAR serial fgets fgetc
Taken from PR #770 :
setbuf(_file, NULL), and std::setvbuf(_file,NULL,_IONBF,NULL) should both give an unbuffered stream (the data is directly written to the input buffer). IAR sets a buffer anyway of size 512 bytes for these calls. Calling setvbuff(_file,buf,_IONBF,NULL) with a buffer that is not a NULL pointer sets the buffer to size one. Which means that as soon as a char is read it is written to the real buffer. If people are interested in looking at this further they can look at the files under ARM/src/dlib: fgets.c, fflush.c, xfrpep.c and xfwprep.c
2014-12-09 14:39:13 +00:00
a96ad0576f
Merge pull request #760 from bcostm/master
...
Targets: NUCLEO_F072RB/F091RC - Remove the call to Systick
2014-12-09 14:31:45 +00:00
0f2b2cdf09
Merge pull request #762 from masaohamanaka/master
...
Targets: RZ_A1H - Fix some bugs about I2C, SPI, Interruptin and add terminal definition of user button.
2014-12-09 14:27:50 +00:00
75673df767
Merge pull request #772 from mbrudevoldlpd/master
...
Add support for mDot with STM32F411RE processor
2014-12-09 14:13:28 +00:00
35ba8d709f
Merge pull request #774 from Sissors/ksdk
...
Targets: K20D50M - Serial baudrate improvements / clk_freqs.h fix
2014-12-09 14:01:54 +00:00
bd6836396b
Moved IAR serial differences to retarget.cpp
2014-12-09 14:30:34 +01:00
a6c9b1c40b
[HAL][K20D50M] Serial baudrate improvements / clk_freqs.h fix
...
Three changes, first it fixes:
https://github.com/mbedmicro/mbed/issues/761 (which was reported
slightly wrong because K20 has again different clocking from KLXX for
uarts).
Second it adds mcgpllfll to clk_freqs, which again is different for K20
compared to KLXX .
Finally it adds the fractional baudrate divider for more accurate serial
baudrates.
2014-12-08 21:15:24 +01:00
2f5cbcb1c6
Add support for mDot with STM32F411RE processor
2014-12-08 10:58:25 -06:00
9909e7ca56
Fixed IAR serial fgets fgetc
2014-12-08 13:12:37 +01:00
0b512e5e6f
Change I2C driver transfer sequence
...
Change I2C driver transfer sequence to go according to H/W manual.
Changed contents are as below.
- Access procedure of ACTBT bit of MR3 register
- Issuance procedure of stop condition
2014-12-08 16:47:28 +09:00
fb0eb349dd
Merge pull request #766 from ohagendorf/reorg_hal_stm324
...
Targets: DISCO_F4xx - add PeripheralPins.c/.h
2014-12-08 07:25:11 +00:00
a17c1dd8f7
Merge pull request #767 from ohagendorf/nucleo_disco_coide
...
STM32xxx: CoIDE/gcc_arm exporter and startup_stm32xx update
2014-12-08 07:24:22 +00:00
48448527bd
Fix a bug that usticker wait interval is not constant.
...
When read the timer value, it have a potential to read abnormal value.
Because we used 16bit + 16bit cascade timer and read timer count separately.
Changed usticker timer from 16bit + 16bit cascade timer to 32bit timer to fix the bug.
2014-12-08 15:47:49 +09:00
86647d8387
[DISCO_F4xx] add PeripheralPins.c/.h
2014-12-07 22:25:38 +01:00
967046e1d6
[STM32xxx] gcc_arm startup files
...
Updates startup files to actual versions of STM32 Cube drivers without
any changes of STs drivers:
- DISCO_F303VC
- DISCO_F334
- NUCLEO_F030
- NUCLEO_F072
- NUCLEO_F302
- NUCLEO_F334
2014-12-07 20:52:49 +01:00
883b2bc0ce
[STM32xxx] CoIDE exporter and gcc_arm
...
- CoIDE options: wrap main and linker option DiscradUnusedSection=1 was
missing in some targets
- CoIDE options: corrected flash loader config for Nucleo_F030 and
Nucleo_F072
- CoIDE options: corrected memory layout (not used per default but now
it is the same as in linker script)
- gcc linker script: changed the memory size from hex number e.g. 0x2000
to decimal 8K
2014-12-07 20:07:56 +01:00
e2a8d32343
Add definition of User button(SW0 and SW1)
...
Add definition of User button for users.
2014-12-05 17:37:53 +09:00
4473a517a8
Fix some bugs that IRQ Edge Interrupt will not operation normal.
...
The bugs of IRQ Edge Interrupt as below.
- Not call a function that was registered in rise, always call a function that was registered in the fall.
- If there are multiple interrupt sources, there is a possibility that end the wrong interrupt processing.
2014-12-05 17:36:52 +09:00
a36c4462f2
Fix a bug that initialize setting of SPI clock value is not correct.
...
Modify the value as below.
uint16_t mask = 0x000c0; ->
uint16_t mask = 0x000c;
2014-12-05 17:35:49 +09:00
dca273e167
Fix a bug that I2C driver can not transfer of 1Byte/2Byte.
...
I2C driver was not considered about 1Byte/2Byte transfer.
Add 1Byte/2Byte transfer processing in I2C driver.
2014-12-05 17:31:22 +09:00
fe61d8c4f7
Fix a fear of bug that a static value will be indefiniteness.
...
There was a function that has the potential to be called with indefiniteness argument.
Modify to not call the function with indefiniteness argument.
2014-12-04 16:03:50 +09:00
7ea2016953
Fix a bug that I2C freq become fixed 100kHz
...
When I2C read/write, I2C freq ignores the setting of user and it become fixed 100kHz.
Implement change the freq according to the setting of user.
2014-12-04 15:40:38 +09:00
2b4edd572b
[NUCLEO_F091RC] Remove call to systick
2014-12-03 15:13:05 +01:00
7761378c39
[NUCLEO_F072RB] Remove call to systick
2014-12-03 15:11:58 +01:00
4d1fc24b2e
Merge pull request #757 from GustavWi/iar_mbed
...
RTOS: IAR support for M0, M0+ and M4
2014-12-03 13:07:25 +00:00
6210f92420
IAR RTOS support M0, M0+ and M4
2014-12-03 12:54:06 +01:00
da233f6e5e
Merge pull request #748 from modtronix-com/master
...
Targets: Fix GCC ARM linker script for STM32L1 (STM32L152XE)
2014-12-03 09:33:13 +00:00
74678ea0fc
Merge pull request #755 from masaohamanaka/master
...
Targets: RZ_A1H - Remove External Bus Controller settings
2014-12-03 08:01:27 +00:00
600af8d001
[LPC11XX_11CXX] Fix SPI slave issue
...
- Fix a bug reported here:
https://developer.mbed.org/questions/4872/SPISlave-Class-dosnt-work-on-LPC1114/
- Add IOCON settings to enable proper pin functions
- Remove non-busy check in slave_receive() function, since the SSP/SPI
is always in busy state when received a valid data according to the
device user manual
- Add bit mask in spi_slave_read() function
- Add TARGET_LPC1114 pin config in SPI_SLAVE test
- Tested with LPC11U24 SPI master and LPC1114 SPI slave
2014-12-03 14:49:23 +09:00
c26d902a4d
Remove External Bus Controller settings
...
GR-PEACH does not have any device that connected external address area of RZ_A1H.
The External Bus Controller settings are needless at GR-PEACH.
Terminals settings will be input mode(It is default setting).
2014-12-03 14:19:07 +09:00
a88eaace6b
Merge pull request #753 from dinau/update_disco_f051r8
...
Targets: DISCO_F051R8 - Updated driver files with HAL driver.
2014-12-02 15:36:15 +00:00
f6743c5b50
Merge pull request #751 from bcostm/master
...
Targets: NUCLEO_F303RE - Add new target
2014-12-02 15:35:46 +00:00
990fc973b5
[DISCO_F051R8]Updated driver files with HAL driver.
2014-12-02 23:41:28 +09:00
c1caff2714
[NUCLEO_F303RE] Add target part 2 - hal
2014-12-02 07:50:07 +01:00
c1397c596f
[NUCLEO_F303RE] Add target part 1 - cmsis
2014-12-02 07:49:08 +01:00
27a9f11f8e
Implement peripheral clock determination process to I2C driver
...
When making I2C communication freq, we used a fix value 33.3MHz as peripheral clock as below.
pclk = 33333333 / (2 << count);
But it is not dynamic when system clock is changed.
So, implement peripheral clock determination process.
Peripheral clock will be decided by RZ-A1H system clock mode.
2014-12-01 20:09:11 +09:00
3a560efa49
Change comment to GCC scripts
...
Change comment to GCC scripts. All GCC linker scrips for STM32L1 have
space for BootRAM defined.
2014-12-01 11:55:43 +11:00
35efc5aaa1
Updated linker script to reserve space for BootRAM
...
Updated linker script to reserve space for BootRAM at 0x138
2014-12-01 11:47:24 +11:00
be30dcbb0b
Fixed GCC ARM linker script for STM32L1 (STM32L152XE.ld)
...
Fixed Flash and RAM definitions in GCC ARM linker script for STM32L1
(STM32L152XE.ld)
2014-11-29 08:31:53 +11:00
7290768dc6
Fix a unreadable comments.
...
There were some Japanese comments in I2C source code.
Fixed those comments to be readable.
2014-11-28 16:18:40 +09:00
1c4831a243
Fixed I2C bug
...
Modified the register settings of communication frequency .
2014-11-28 10:28:45 +09:00
e1d38422ed
Merge branch 'newbuild_lib_rev92'
2014-11-27 13:56:11 +00:00
8a3087825b
Merge pull request #744 from masaohamanaka/master
...
Targets: RZ_A1H - Fix RTOS build error (Cortex A)
2014-11-27 03:35:29 -08:00
84b6398edd
Merge pull request #742 from GustavWi/iar_mbed
...
Targets: IAR Fixed NVIC table in ram for stm targets
2014-11-27 03:33:50 -08:00
cf9fc3c4ac
Add SD function
...
Add SD function and tests for RZ_A1H.
2014-11-27 17:12:57 +09:00
1401e677dd
Merge pull request #743 from ohagendorf/linker_scripts
...
Targets: STM32F0, F3, F4, L053, L152 - GCC ARM linker script reorganisation
2014-11-26 23:42:34 -08:00
0f65920536
IAR Fixed NVIC table in ram for nucleo targets
2014-11-27 08:24:08 +01:00
e0d3730a55
[STM_Targets] linker file naming principle
2014-11-26 16:13:37 +01:00
939471cdbd
IAR Fixed NVIC table in ram for stm targets
2014-11-26 16:09:03 +01:00
2e3c02f121
[STM32L1xx] linker script reorganisation
2014-11-26 15:07:38 +01:00
80ddc6661d
[DISCO_F4xx][NUCLEO_F4xx] linker and startup script reorganisation
2014-11-26 14:29:52 +01:00
dda84e6c32
[STM32F03X][STM3207X] linker script reorganizatin
2014-11-26 13:48:58 +01:00
60a7d3755f
IAR Fixed NVIC RAM Vector space for NXP targets
2014-11-26 13:30:49 +01:00
087a8eab34
[STM32L053xx] linker script reorganisation
2014-11-26 13:15:09 +01:00
0737130e57
[STM32F3xx] linker script reorganisation
2014-11-26 12:31:02 +01:00
c3208fe6f4
Merge pull request #736 from GustavWi/iar_mbed
...
RTOS: IAR Export for CORTEX M3
2014-11-26 08:57:24 +01:00
d9a231862a
Merge pull request #733 from masaohamanaka/master
...
Targets: RZ_A1H - Modified Terminal setting for New GR-PEACH.
2014-11-26 08:53:06 +01:00
0d99a7d7ad
Delete old version terminal setting code.
...
We confirmed that user never use the old version GR-PEACH.
So, we deleted old version terminal setting code.
2014-11-26 13:44:01 +09:00
d8f6c47dde
Bumped build number
2014-11-25 13:48:38 +00:00
4e89d3c771
Merge pull request #739 from xiongyihui/master
...
Targets: ARCH_MAX & DISCO_F407VG - Add SystemCoreClockUpdate and HAL_Init to mbed_sdk_init
2014-11-25 12:30:32 +01:00
9bf1247ff9
[ARCH_MAX & DISCO_F407VG] add SystemCoreClockUpdate and HAL_Init to
...
mbed_sdk_init
HAL_Init is needed by Arch MAX to setup RTC with internal clock
2014-11-25 16:48:14 +08:00
d5afb47760
Merge pull request #711 from ohagendorf/_exit-or-exit
...
mbed: Name of exit function in exit.c for GCC ARM (_exit)
2014-11-25 08:21:11 +01:00
8c56483c43
[mbed][MTS_DRAGONFLY_F411RE] fix D2 pin mapping, remove PWM_OUT from PinNames.h
2014-11-24 11:30:37 -06:00
dbe1af7787
[cmsis][MTS_DRAGONFLY_F411RE] set USE_PLL_HSE_EXTC to 0, causing problems with IAR export and we have no external clock option
2014-11-24 09:43:18 -06:00
ea50eb3512
[NUCLEO_L053R8] Correct issue with Travis build
2014-11-24 16:20:26 +01:00
d03da0cd30
removed comments and fixed USB_RAM section
2014-11-24 14:28:08 +01:00
c2de05e882
Fixed LPC1768 NVIC placement space in RAM
2014-11-24 14:16:32 +01:00
53f92133dc
[NUCLEO_L0/L1] Add PeripheralPins files
2014-11-24 12:36:39 +01:00
afd167f734
[NUCLEO_F4] Add note on optional pins
2014-11-24 12:35:46 +01:00
04dc0c7a24
[NUCLEO_F3] Add PeripheralPins files
2014-11-24 12:34:35 +01:00
f62073e179
[NUCLEO_F103RB] Add PeripheralPins files
2014-11-24 12:33:15 +01:00
60e0d1431e
[NUCLEO_F0] Add PeripheralPins files
2014-11-24 12:32:02 +01:00
092828ce33
Added IAR Export RTOS CORTEX M3
2014-11-24 10:58:08 +01:00
814740f86e
Merge pull request #720 from bcostm/master
...
Targets: NUCLEOs - Improvement of gpio_irq hal
2014-11-24 08:15:36 +01:00
4d04aba235
[NUCLEO_F072RB] exporter for gcc and coide
2014-11-22 14:56:30 +01:00
caf42f946c
[NUCLEO_F030R8] exporter for gcc and coide
2014-11-22 12:18:31 +01:00
59f686bbc1
Modified Terminal setting for New GR-PEACH.
...
Modified Terminal setting of Ethernet and LED PIN for New GR-PEACH.
2014-11-21 13:47:46 +09:00
365df95cf6
[mbed][MTS_DRAGONFLY_F411RE] fix pin names for spi to external flash
2014-11-20 14:43:10 -06:00
4196364088
[mbed][MTS_DRAGONFLY_F411RE] change wrong PLL members to correct values from ST Cube code
2014-11-20 12:36:01 -06:00
bb4c5f4ab5
[mbed][MTS_DRAGONFLY_F411RE] remove unnecessary VIMPINNAMES file
2014-11-20 11:06:20 -06:00
ac11414116
[mbed][MTS_DRAGONFLY_F411RE] add RADIO_TX/RX pins, correct reversed TX/RX pins for uart6
2014-11-20 09:57:13 -06:00
ffab541ac9
[mbed][MTS_DRAGONFLY_F411RE] clean up PinNames.h
2014-11-20 07:52:48 -06:00
451914a276
[mbed][MTS_DRAGONFLY_F411RE] fix stdio uart decl, fix D3 pin decl, change blinky test main.cpp back to original
2014-11-20 07:43:42 -06:00
c6f0c3b14b
Revert "[NUCLEO_F103RB] update SystemCoreClock after changing clock settings"
2014-11-20 19:19:47 +08:00
3e1aac36e1
Correct pin names for serial rx/tx
2014-11-19 14:52:49 -06:00
f364b76d2f
Merge pull request #703 from masaohamanaka/master
...
Targets: RZ_A1H - Fixed a bug of serial interrupt
2014-11-19 00:59:43 -08:00
dcfa675e50
Merge branch 'NUCLEO_L152RE_exporter' of github.com:ohagendorf/mbed into ohagendorf-NUCLEO_L152RE_exporter
...
Conflicts:
workspace_tools/build_travis.py
workspace_tools/export/coide.py
2014-11-19 08:43:14 +00:00
7ff3e68a96
Merge pull request #714 from ohagendorf/NUCLEO_F302R8_exporter_2
...
Tools: NUCLEO_F302R8 - exporters for gcc_arm and coide
2014-11-19 00:28:37 -08:00
5ad32eaa60
Merge pull request #715 from kshoji/nRF51822_serial_31250
...
Targets: nRF51822 - Add support for Serial 31250 baud (for legacy MIDI)
2014-11-19 00:26:52 -08:00
12b3c601ea
Merge pull request #721 from GustavWi/iar_mbed
...
Tools: IAR export for some NXP Platforms
2014-11-19 00:23:12 -08:00
72e2d393a6
[NUCLEO_F103RB] update SystemCoreClock after changing clock settings
2014-11-19 13:51:12 +08:00
d05c1d4950
nrf51_bitfields.h reverted.
2014-11-19 14:47:01 +09:00
849c8742f0
IAR export LPC4088
2014-11-18 16:19:26 +01:00
299749f143
IAR export LPC810 + 812
2014-11-18 16:09:38 +01:00
82523de2c6
IAR export LPC1549
2014-11-18 16:01:34 +01:00
d13714fb07
IAR export for LPC11XX and 11CXX
2014-11-18 15:49:23 +01:00
b3656be310
Added IAR export for LPC11UXX
2014-11-18 14:54:40 +01:00
20177c912b
[NUCLEOs] Improvement of gpio_irq hal
...
Now it is possible to have multiple interrupt pins on EXTI vectors.
Example:
EXTI0 -> PA_0 or PB_0 or PC_0, ... only 1 pin
EXTI5_9 -> PA_5 and PA_6 and PB_7 and PC_8 and PC_9: up to 5 pins
EXTI10_15: PA_10 and PB_11 and PB_12, ... : up to 6 pins
2014-11-18 12:28:30 +01:00
34eccbf435
Merge pull request #716 from bcostm/master
...
Targets: NUCLEO_F4xx - Add PeripheralPins.c/h file
2014-11-18 02:15:57 -08:00
5311efaae6
Added IAR export for LPC11U68.
2014-11-18 11:15:49 +01:00
a210914f42
Fixed some function's bugs
...
Fixed some bugs and modified mmu setting.
Fixed functions as below
- analog in
- i2c
- interruptin
2014-11-18 13:54:39 +09:00
ff85a88b7b
[NUCLEO_F4] Add PeripheralPins.c/h file
...
Move all pinouts into these 2 files.
2014-11-17 10:01:44 +01:00
3dcb6a5b25
nRF51822 - Add support for Serial 31250 baud (for Legacy MIDI)
2014-11-17 12:56:40 +09:00
42c20128a6
[NUCLEO_F302R8] exporters for gcc_arm and coide
...
Adds exporter for gcc_arm and coide for the NUCLEO_F302R8.
2014-11-16 18:24:57 +01:00
f37a45d3b5
Name of exit function in exit.c
...
Change the name of the exit function to _exit as suggested in clib
documenation for all gcc_arm toolchains (GCC_ARM and CoIDE)
2014-11-16 17:43:42 +01:00
5c36e9544f
[NUCLEO_L152RE] exporters for gcc_arm and coide
2014-11-16 17:10:47 +01:00
2e18da7419
[mbed][MTS_DRAGONFLY_F411RE] added platform support files and dirs built gcc executable NOT working
2014-11-14 11:29:46 -06:00
570c25d255
Merge pull request #705 from 0xc0170/fix_issue#704
...
Targets: K64F - UART_NUM fix in a condition
2014-11-14 07:46:28 -08:00
81254a0e44
K64F - UART_NUM fix in a condition
2014-11-14 15:21:39 +00:00
cde105eaa5
Fixed a bug of serial interrupt
...
I fixed a bug of serial interrupt as below.
Serial TX/RX interrupt was not occur when TX/RX end.
2014-11-14 21:20:46 +09:00
ac6b5cb06b
[NUCLEO_F0] Align hal files
2014-11-14 11:01:47 +01:00
23761ee73e
[NUCLEO_F3] Align hal files
2014-11-14 11:00:10 +01:00
c05cb2e726
[NUCLEO_F4] Align hal files
2014-11-14 10:58:57 +01:00
67346ec8d6
Merge branch 'reorder_f3xx_2' of github.com:ohagendorf/mbed into ohagendorf-reorder_f3xx_2
...
Conflicts:
workspace_tools/export/coide.py
2014-11-14 08:56:20 +00:00
dffeedc96e
Merge pull request #695 from autopulated/testsforall
...
Targets: add USBTX and USBRX pin definitions for targets that don't provide them
2014-11-14 00:48:06 -08:00
b5ba59050b
Merge pull request #697 from bcostm/master
...
Targets: NUCLEOs - Style corrections in hal files (astyle)
2014-11-14 00:47:19 -08:00
32a7f019c0
Modify *.sct to shrink binary file more
2014-11-14 10:32:46 +09:00
60d5fb780e
Modify mmu setting, scatter, sf boot loader to shrink binary file
2014-11-14 09:01:34 +09:00
6d1da4ef47
[NUCLEO_L053R8] Typo corrections (astyle)
2014-11-13 16:46:25 +01:00
df479e409a
[NUCLEO_F411RE] Typo corrections (astyle)
2014-11-13 16:45:36 +01:00
40f3f7e27c
[NUCLEO_F401RE] Typo corrections (astyle)
2014-11-13 16:44:50 +01:00
307f641d14
[NUCLEO_F334R8] Typo corrections (astyle)
2014-11-13 16:44:05 +01:00
2fb9552913
[NUCLEO_F302R8] Typo corrections (astyle)
2014-11-13 16:43:09 +01:00
285977d068
[NUCLEO_F103RB] Typo corrections (astyle)
2014-11-13 16:42:32 +01:00
9d02d52994
[NUCLEO_F072RB] Typo corrections (astyle)
2014-11-13 16:41:28 +01:00
17e61f58d6
[NUCLEO_F030R8] Typo corrections (astyle)
2014-11-13 16:40:37 +01:00
fa2e957179
also add USBTX=USBRX=NC definitions for LPC13XX
2014-11-13 14:13:42 +00:00
69cd573545
add USBTX and USBRX pin definitions for targets that don't provide them (so that tests compile), but set to NC
2014-11-13 11:24:36 +00:00
08c85ef136
Merge pull request #680 from mbrudevoldlpd/master
...
Platform: Add support for MultiTech mDot module
2014-11-13 08:21:18 +00:00
ae8d818927
Rename mDot to mDot F405RG to allow for variation in processor
2014-11-12 16:21:13 -06:00
56af0e1621
[TARGET_DISCO_F303] reorder structure - part5
...
Add missing -Wl,--wrap,main linker option so that __wrap_main is called.
This function was ignored in gcc_arm and coide projects before.
2014-11-12 22:20:38 +01:00
dcaa34a9d6
Fix whitespace per coding standard
2014-11-12 10:16:29 -06:00
691f34097a
[TARGET_DISCO_F303] reorder structure part4
...
Remove change of wrong target and add it to the wright one. Additionally
changing the CoIDE template file to the correct mcu.
2014-11-12 14:31:57 +01:00
857d59a6c0
Added IAR export support for NUCLEO F103RB
2014-11-12 13:31:30 +01:00
6737282994
Merge pull request #679 from toyowata/master
...
Targets: LPC11U68 - Fix GPIO init for specific pins
2014-11-12 09:13:13 +00:00
dbd8b3bab4
Merge pull request #686 from GustavWi/iar_mbed
...
Toolchain: IAR - lpc1347 startup fix
2014-11-12 09:12:50 +00:00
6fd59778d6
Merge pull request #684 from Sissors/ksdk
...
Targets: KSDK - Fix ACK/NACK received inverted (issue #661 )
2014-11-12 08:45:48 +00:00
d3e2cacff3
[HAL][KSDK] Fixed ACK/NACK received inverted ( https://github.com/mbedmicro/mbed/issues/661 )
...
As reported by Geremia G
(http://developer.mbed.org/forum/bugs-suggestions/topic/5220/ )
2014-11-11 20:32:07 +01:00
f3ad604ebc
Fixed reset handler for LPC1347 IAR
2014-11-11 14:43:17 +01:00
c9ec513887
Merge pull request #677 from Sissors/ksdk
...
Targets: Freescale KSDK - Fix first serial char not being sent
2014-11-11 09:38:07 +00:00
3f5b4b39e2
Add support for uvision
2014-11-10 16:16:11 -06:00
ac7da3e5d8
Add support for GCC ARM
2014-11-10 16:16:06 -06:00
5d6ee64bf1
Support for MTS MDOT
2014-11-10 16:15:53 -06:00
8adfd82aa1
Merge pull request #673 from Wind0r/fix_lpc1768_repeatmode
...
Targets: LPC176X - Add repeater pinmode
2014-11-10 07:40:15 +00:00
59fa5437e3
Merge pull request #663 from bikeNomad/master
...
Ensure that IG (Global) bit is reset in MAC address for K64F and others
2014-11-10 07:37:52 +00:00
e24f5b642b
Merge pull request #662 from xiongyihui/nrf51822
...
Targets: NRF51822 - enable I/O mapping and peripheral dynamic assignment for I2C and SPI
2014-11-10 07:36:19 +00:00
b0a7a246c1
[LPC11U68] Fix GPIO init for specific pins
...
* Add GPIO initialization value for P0_12, P0_13 and P0_14 since default
mode for them are other than GPIO
* This issue reported here:
https://developer.mbed.org/questions/4874/Using-SPI-on-LPCXpresso11U68/
2014-11-10 14:01:59 +09:00
20212b8c6b
[TARGET_DISCO_F303] reorder structure - part 3
...
Update of mbed hal.
2014-11-10 00:12:40 +01:00
57a79c08a9
[HAL][KSDK] Fix first serial char not being sent
...
The K64F/K22F didn't send the first char. I don't know why exactly, but
any type of reading a status register seems to fix it. And this extra
line at least makes sense. Now it works correctly.
2014-11-09 19:40:29 +01:00
de1bb3af3a
Add repeater pinmode
2014-11-08 12:07:39 +01:00
162eebcbda
[NUCLEO_L152RE] Remove old cmsis folder
2014-11-07 14:22:50 +01:00
1874247540
[NUCLEO_L152RE] Move cmsis files in STM32L1 folder
2014-11-07 14:21:16 +01:00
0780a16b8d
[STM32L1] Add new folder with STM32Cube inside
2014-11-07 14:20:04 +01:00
d00caad8c9
[HAL][NRF51822] enable I/O mapping and peripheral dynamic assignment for I2C and SPI
2014-11-07 19:24:34 +08:00
5c842943da
[NUCLEO_F0] Add missing files for IAR exporter
2014-11-07 09:24:57 +01:00
eec0be05cd
Merge pull request #660 from bcostm/master
...
Targets: STM32F0 - Factorisation of NUCLEO_F030R8/F072RB/F091RC cmsis folders
2014-11-07 08:13:40 +00:00
3e4e9ade0d
remove useless assert line
2014-11-07 09:42:35 +08:00
e6ae0a7e02
Ensure that IG (Global) bit is reset in MAC address for K64F and others
...
See IEE 802.3-2002, Section 3.2.3(b)
2014-11-06 09:48:32 -08:00
142ad22a2f
[RZ_A1H] Remove target-specific check from build system
2014-11-06 13:47:43 +00:00
8724eb616b
Merge pull request #594 from tkuro-rel/master
...
[RZ/A1H] mbed-RZ first release
2014-11-06 10:54:58 +00:00
e449648cbc
[NUCLEO_F072RB] Update gpio/port structures
...
Needed due to the new STM32Cube version used.
2014-11-06 10:26:20 +01:00
d8e93f093f
[NUCLEO_F091RC] Remove old folder
2014-11-06 10:18:13 +01:00
383ad3cf78
[NUCLEO_F072RB] Remove old folder
2014-11-06 10:17:43 +01:00
01c416f19b
[NUCLEO_F030R8] Remove old folder
2014-11-06 10:17:03 +01:00
7fa58b4e27
[NUCLEO_F091RC] Move files in STM32F0 folder
2014-11-06 10:15:28 +01:00
a6d6f5c645
[NUCLEO_F072RB] Move files in STM32F0 folder
2014-11-06 10:14:36 +01:00
f0792715d1
[NUCLEO_F030R8] Move files in STM32F0 folder
2014-11-06 10:13:14 +01:00
7204fce6c7
[STM32F0] Add TARGET_STM32F0 folder
...
With STM32Cube inside.
2014-11-06 10:11:29 +01:00
073a7a0c6f
Merge pull request #657 from bcostm/master
...
Targets: STM32L0 - Cube driver release note
2014-11-06 08:41:05 +00:00
33a843cf93
Merge remote-tracking branch 'upstream/master'
...
Conflicts:
workspace_tools/targets.py
2014-11-06 16:19:35 +09:00
a7c3861d31
Merge branch 'master' of https://github.com/mbedmicro/mbed
2014-11-06 08:19:26 +01:00
e0c00cc4ee
[WALLBOT_BLE] Add new platform
...
* Add new platform Wallbot BLE
* Identical as nRF51822 target, but different pinout
2014-11-06 16:03:43 +09:00
bd79e23ed2
Fixed file header
...
Fixed copyright and correction of erroneous description.
2014-11-06 15:56:42 +09:00
000698d043
[STM32L0] Cube driver release note
...
Go back to original html file found in the ST package. Finally the text
file is not practical. I will find another way to record the changes
made on this driver. Maybe an additional text file to add in the folder
?
2014-11-05 17:06:48 +01:00
45326db36d
Merge pull request #649 from rgrover/master
...
API: ticker casting fix (issue #649 )
2014-11-05 14:59:16 +00:00
cfeccf154f
Merge pull request #654 from bcostm/master
...
Exporters: STM32L053R8 - IAR exporter
2014-11-05 14:20:00 +00:00
79a3fdb1e2
[LPC824] Fix serial interrupt issues
...
Basically, this is same fix as
https://github.com/mbedmicro/mbed/pull/633
* Fix issue by handling interrupt type (TxIrq and RxIrq)
* ISR now correctly refers INTSTAT instead of STAT to get interrupt
cause
* Disable interrupt when updating vector table
* Tested by issue #616 test cases and serial_interrupt test
2014-11-05 22:35:35 +09:00
dd5e093d55
[NUCLEO_L053R8] Add IAR exporter
2014-11-05 10:42:44 +01:00
f0de488ad5
Merge branch 'master' of https://github.com/mbedmicro/mbed
2014-11-05 10:28:04 +01:00
abf66ba15f
[STM32L0] Replace NULL by HAL_NULL in STM32Cube driver for IAR
...
- Fix issue #482 for STM32L0 devices
- Change release note file in text format and add changes for mbed
2014-11-05 10:21:10 +01:00
bdc83f71d6
Merge pull request #650 from ohagendorf/reorder_f3xx
...
Targets: DISCO_F334 - Reorder f3xx
2014-11-05 00:46:52 -08:00
d61817a4c8
[TARGET_DISCO_F303] reorder structure - part2
...
Update of mbed hal.
2014-11-05 01:11:22 +01:00
0c3a635004
[TARGET_DISCO_F303] reorder structure - part1
...
Removing old hal and moving target specific files to new folder.
2014-11-04 17:21:32 +01:00
63cad2a60b
Potential fix for #646
2014-11-04 15:39:48 +00:00
c0adc9f3a9
[TARGET_DISCO_F334C8] reorder structure - part2
...
Removing cmsis files.
2014-11-04 16:23:29 +01:00
9362f706c8
[TARGET_DISCO_F334C8] reorder structure - part1
...
Moving targetspecific files to new folder in new structure
2014-11-04 16:22:38 +01:00
340effa2c7
[NUCLEO_L053R8] Update GPIO structures
...
Due to latest registers map file used.
2014-11-04 11:16:17 +01:00
1ad6757c9d
[STM32L0] Remove useless files
2014-11-04 11:13:51 +01:00
0f20cff47d
[STM32L0] Update registers map file
2014-11-04 11:13:20 +01:00
e9c0fd990f
[STM32L0] Update version in files, add Cube driver release note
2014-11-04 11:12:26 +01:00
5a868b18bc
Merge pull request #640 from bcostm/master
...
Targets: Factorisation of NUCLEO_F302R8 and F334R8 cmsis folders
2014-11-04 01:40:34 -08:00
8f7778d898
Merge pull request #639 from ohagendorf/bcostm_branch_f4xx_structure_reorder
...
Targets: Nucleo F4xx - Reorder f4xx structure
2014-11-04 01:29:29 -08:00
ff48c7994b
[TARGET_XXX_L053YY] filename - includename case missmatch
...
Changed include filename to a lower case l from higher case L because of
Windows-Linux incompatibility. Removed temporarly taget DISCO_F407VG
from build_travis so that Travis runs trough the build process.
2014-11-03 23:40:57 +01:00
b66ba7bef9
Remove previous NUCLEO_F334R8 folder
2014-11-03 14:20:21 +01:00
a1b2540633
Remove previous NUCLEO_F302R8 folder
2014-11-03 14:19:38 +01:00
11e5613d6d
Add NUCLEO_F334R8 specific files
2014-11-03 14:17:52 +01:00
263eff08f2
Add NUCLEO_F302R8 specific files
2014-11-03 14:16:45 +01:00
f18bc70c98
Add TARGET_STM32F3 folder with STM32Cube driver
2014-11-03 14:14:13 +01:00
835736bd23
Merge pull request #637 from rgrover/master
...
Target: NUCLEO_F103RB - removing some un-used variables
2014-11-03 02:54:33 -08:00
dadc3ea8f1
Merge branch 'rework_cmsis_stm32l0' of github.com:ohagendorf/mbed into ohagendorf-rework_cmsis_stm32l0
2014-11-03 10:32:32 +00:00
02478cd1f2
Merge pull request #633 from toyowata/master
...
Target: LPC1549 - Fix serial interrupt issues (issue report #616 )
2014-11-03 02:21:15 -08:00
b3d9ff9430
Merge pull request #631 from ohagendorf/target_disco_f334c8
...
Platform: DISCO_F334C8 addition
2014-11-03 02:18:32 -08:00
Marcomissyou
milangit
0xc0170
Przemek Wirkus
Willem23
nitin.bhaskar.27.09@gmail.com
Anders Lindvall
bcostm
Adam Green
ytsuboi
Paul Staron
Masao Hamanaka
Rohit Grover
ohagendorf
kazu-zamasu
albert361
Toyomasa Watarai
Martin Olejar
mazgch
Yihui Xiong
Mike Fiore
vincent rabbit
Richard Osterloh
GustavWi
sg-
Nick DeLisi
Sissors
Michael Brudevold
dinau
modtronix-com
Bogdan Marinescu
kshoji
James Crosby
Wind0r
Ned Konz
Bogdan Marinescu
Takayuki Kurosawa