34619e55a6
MCUXpresso: Fix the LPC GPIO IRQ driver
...
The IRQ disable was always disabling both rising
and falling edges of the interrupt thereby causing
failures in cases when one of the two should stay enabled.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2019-07-17 15:18:59 -05:00
12d60f86ea
Merge pull request #11050 from jeromecoutant/PR_DISCO_L4R9I
...
DISCO_L4R9I new target
2019-07-17 23:15:45 +03:00
4cdde1d07f
Merge pull request #11052 from NXPmicro/Update_LPC546XX_ADC
...
Update MCUXpresso AnalogIn driver for LPC devices
2019-07-17 23:14:35 +03:00
fa9a3ed05f
Merge pull request #11053 from maclobdell/psoc6-add-bootloader-support
...
Add Mbed bootloader support to CY8CKIT_062_WIFI_BT and CY8CPROTO_062_4343W
2019-07-17 23:12:11 +03:00
e74fbcd79e
Add CC3220SF_Launchxl to Mbed OS
2019-07-17 13:19:32 -05:00
7ff707c9b4
Fix SAADC resolution for nRF52-based targets... again
2019-07-17 11:43:20 -04:00
3d5489a6f8
Merge pull request #10644 from fkjagodzinski/hal-gpio_pinmap
...
Add a gpio pinmap
2019-07-17 14:39:40 +03:00
987533859a
Merge pull request #10104 from kjbracey-arm/sleep_api
...
Sleep rework, RTOS API for bare metal, wait deprecations
2019-07-17 14:37:53 +03:00
8efd123776
Merge pull request #11042 from caoyuan96421/bugfix
...
Fixed serial_device IRQ infinite loop bug due to uint8_t overflowing in STM devices
2019-07-17 14:33:21 +03:00
02f8fbda62
Merge pull request #11019 from OpenNuvoton/nuvoton_wait-ns
...
Nuvoton: Modify wait ns(...) to provide more accurate implementation
2019-07-17 14:30:47 +03:00
0a4e5146b0
Merge pull request #11049 from SeppoTakalo/normalize
...
Normalize line endings for IM880B startup files.
2019-07-17 09:24:52 +01:00
e50583459f
LPC54114: Fix compile warnings
...
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2019-07-16 12:29:32 -05:00
55a2eddf8a
MCUXpresso: Update LPC SPI HAL driver
...
Add support for different slave selects
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2019-07-16 12:10:34 -05:00
ccbfea502c
add defines for bootloader support, for target without cmsis pack
2019-07-15 23:13:22 -05:00
9b8a859883
MCUXpresso: Update the Analogin driver for LPC devices
...
1. Update the clock divider setting
2. ADC resolution is 12-bits, update the API return value
to return 16-bit result
3. Update IOMUX setup
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2019-07-15 14:40:55 -05:00
f4648673cf
LPC54114: Update the ADC SDK driver
...
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2019-07-15 14:40:55 -05:00
7b011e9fe2
LPC546XX: Update the ADC SDK driver
...
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2019-07-15 14:40:55 -05:00
9cdfe37783
Merge pull request #10994 from fkjagodzinski/fix-serial_fc_guards
...
Add DEVICE_SERIAL_FC guards to serial HAL API
2019-07-15 15:47:37 +03:00
01484a2226
Merge pull request #11007 from SiliconLabs/fix/fpga_tests/pwm
...
Fix PWM output on Silicon Labs targets for large pulsewidths
2019-07-15 15:43:46 +03:00
b5d8c3860e
Merge pull request #11008 from SiliconLabs/fix/fpga_tests/spi
...
Enable FPGA-based SPI testing on Silicon Labs targets
2019-07-15 15:42:55 +03:00
6ef5e228b5
Merge pull request #11015 from SiliconLabs/fix/fpga_tests/adc
...
Fix wrongly declared ADC pinout for EFM32GG11 STK3701A
2019-07-15 15:38:47 +03:00
5c45fa72a9
Merge pull request #11003 from NXPmicro/Fix_LPC_I2C
...
LPC MCUXpresso: Remove extra I2C transaction on byte write
2019-07-15 15:32:02 +03:00
1a835dda4a
DISCO_L4R9I new target
2019-07-15 14:06:40 +02:00
b22641ca18
Normalize line endings for IM880B startup files.
2019-07-15 14:56:22 +03:00
c98b0d0b03
VK_RZ_A1H: add mbed_get_a9_tick_irqn
2019-07-15 10:13:50 +03:00
a522dcfa0a
Replace deprecated wait calls
2019-07-15 10:13:50 +03:00
6ed21ee1c0
Fixed serial_device IRQ infinite loop bug due to uint8_t overflowing
2019-07-13 00:05:25 -04:00
1e5a52a1fd
[Nuvoton] Fix mbedmicro-rtos-mbed-systimer/Wake up from deep sleep failing
...
This test requires total latency (tot = h/w + s/w) (wakeup from deepsleep) be
under 1ms. To check the issue, measure total latency on Nuvoton targets:
TARGET EXP(us) EXP+TOL(us) ACT(us)
NANO130 42000 43000 42939
NUC472 42000 43000 42236
M453 42000 43000 43274
M487 42000 43000 42877
M2351 42000 43000 43213
Checking h/w spec, h/w latency (wakeup time from normal power-down mode) on
M487/M2351 is just 1us (n/a on other targets). S/W latency plays the major
part here.
S/W latency relies on system performance. On Nuvoton targets, 'LPTICKER_DELAY_TICKS'
possibly complicates the test. Anyway, to pass the test, add extra 1ms latency
(deep-sleep-latency) in targets.json for Nuvoton targets.
2019-07-12 13:10:59 +08:00
22c82dcb9c
Merge pull request #10692 from vmedcy/pr/psoc6-hal
...
PSOC6: initial integration of Cypress HAL
2019-07-11 17:28:23 +01:00
b6524070eb
PSOC6: TARGET_PSOC6_FUTURE doesn't implement DEVICE_I2CSLAVE
2019-07-11 15:43:25 +03:00
7db0e83836
Merge pull request #11013 from tymoteuszblochmobica/revert-10938-iar
...
Revert "K64F, STM32F429: IAR linker scripts dynamic heap fix"
2019-07-11 12:18:53 +01:00
adfac3c1f9
PSOC6: do not remove QSPI from FUTURE_SEQUANA targets
...
Since QSPi is not yet supported by base TARGET_PSOC6,
there is no need to remove the device label from
FUTURE targets that inherit from TARGET_PSOC6.
This will need to be reverted back once the QSPI support
is implemented for Cypress PSOC6 targets.
2019-07-11 12:51:52 +03:00
bab34cb467
PSOC6: cleanup DEVICE_QSPI mappings
...
Note: device_has: "QSPI" is still disabled for TARGET_PSOC6
(QSPI HAL implementation is incomplete).
2019-07-11 12:50:56 +03:00
2524a67c38
Merge remote-tracking branch 'ARMmbed/master' into pr/psoc6-hal
2019-07-11 10:19:03 +01:00
9fdfe3fa30
Merge pull request #11002 from NXPmicro/Add_Restricted_List
...
LPC546XX: Add pins to LPCXpresso restricted list
2019-07-11 08:14:20 +01:00
878c93673b
Reverted "K64F, STM32F429: IAR linker scripts dynamic heap fix"
...
due to side effect with K64F bootloader application jump after three consecutive HW resets.
2019-07-10 13:30:40 +02:00
35851005ef
Fix wrongly declared ADC pinout for EFM32GG11 STK3701A
2019-07-10 11:27:29 +01:00
140b72d3ed
Merge remote-tracking branch 'ARMmbed/master' into pr/psoc6-hal
2019-07-10 10:54:14 +01:00
fb4d898f2e
Allow re-initializing an I2C peripheral
...
Allows the FPGA based test to pass, but requires #11004 before it will
2019-07-09 23:37:11 +01:00
6094542bb1
Avoid the FPGA tester using hardware CS which is not supported
...
Also implement rudimentary spi_free...
2019-07-09 22:48:37 +01:00
476dc6e46a
Fix for PWM output found by testing against FPGA shield
...
Two issues:
* Downcasting too early
* Potential for a uint32_t overflow in an intermediate calculation
Passing test requires #11005 to be merged.
2019-07-09 22:38:53 +01:00
aef60d7edf
LPC MCUXpresso: Remove extra I2C transaction on byte write
...
An extra start signal was observed on the bus which was
discovered by the FPGA test shield.
This is because the hardware sends out a transaction as soon
as a write to the START bit. Hence the write to the START
bit is delayed by using a flag.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2019-07-09 16:05:28 -05:00
58ba83b6e4
LPC546XX: Add pins to LPCXpresso restricted list
...
FPGA GPIO tests cannot be run on certain pins
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2019-07-09 15:40:55 -05:00
4842c87815
RDA5981X: Add SERIAL_FC
...
According to comment in the implementation this target supports the
hardware flow control on UART1 peripheral.
This patch fixes build errors after adding DEVICE_SERIAL_FC guards to
hal/serial_api.h.
2019-07-09 16:30:12 +02:00
68d222b3d1
MPS2: Fix serial_init when FC is not used
...
After adding DEVICE_SERIAL_FC guards to serial_api.h
serial_set_flow_control is not available. In case of this
implementation, this function is a no-op and may be safely removed.
2019-07-09 16:12:32 +02:00
86149e59d6
FVP_MPS2: Fix serial_init when FC is not used
...
After adding DEVICE_SERIAL_FC guards to serial_api.h
serial_set_flow_control is not available. In case of this
implementation, this function is a no-op and may be safely removed.
2019-07-09 16:05:04 +02:00
647b5817ce
Merge pull request #10982 from jeromecoutant/PR_LPUART
...
STM32 LPUART minor update for easy maintenance
2019-07-09 08:33:06 +01:00
21df0e00ce
[Nuvoton] Enlarge LPTICKER_DELAY_TICKS for safe
...
On Nuvoton targets, lp_ticker_set_interrupt(...) needs around 3 lp-ticker
ticks to take effect. It may miss when current tick and match tick are very
close (see hal/LowPowerTickerWrapper.cpp). Enlarge LPTICKER_DELAY_TICKS to
4 from 3 to address this boundary case.
2019-07-09 15:27:34 +08:00
358046e472
Merge pull request #10989 from mprse/spi_fpga_basic_test_ext
...
SPI FPGA test extension + SPI driver fix (K64F)
2019-07-08 20:42:47 +01:00
d77fb26e9f
PSOC6: fix license headers per review feedback
2019-07-08 18:25:03 +03:00
1264660314
Merge pull request #10972 from 0xc0170/test_target
...
add new target IM880B
2019-07-08 16:34:36 +03:00
bd762ce03f
Merge pull request #10466 from jeromecoutant/PR_STM32H7_WATCHDOG
...
STM32H7: WATCHDOG and RESET_REASON support
2019-07-08 13:54:40 +01:00
7d7c1416af
K64F SPI driver: Add the delay between CS assertion and first sclk edge
...
FPGA test shield requires at lease half slck period delay between CS assertion and first sclk edge.
2019-07-08 14:54:33 +02:00
1501ffe704
PSOC6: remove CY8CKIT-062S2-4343W (not ready for release)
...
Also removed _M0 targets that are no longer used.
2019-07-08 14:49:26 +03:00
5cc66282dd
PSOC6: remove PSA targets
2019-07-08 14:49:26 +03:00
56f1d0613f
PSOC6: remove libwiced_drivers for targets ported to WHD
2019-07-08 14:49:26 +03:00
d07ca87816
PSOC6: update Cypress boards to use TARGET_WHD
2019-07-08 14:49:26 +03:00
8ede226c16
PSOC6: add WHD sources
2019-07-08 14:24:23 +03:00
4f22853c1e
PSOC6: update BSP sources
2019-07-08 14:24:23 +03:00
c647531767
PSOC6: update BSP GeneratedSource, add design.modus
2019-07-08 14:24:22 +03:00
4bd47e9bca
PSOC6: update to latest psoc6pdl
2019-07-08 14:24:21 +03:00
b562dd7895
PSOC6: update Cypress targets to use psoc6csp
2019-07-08 14:24:20 +03:00
a9cd9482c0
PSOC6: add psoc6csp asset with Cypress HAL implementation
...
PSoC 6 Chip Support Package provides hardware abstraction layer
for Cypress PSoC 6 device peripherals.
2019-07-08 13:26:46 +03:00
3d905b0607
[NUC472] Override wait_ns(...) to provide more accurate implementation
...
NUC472 series doesn't support cache but supports branch buffer. But it still
cannot provide zero-wait state flash performance.
2019-07-08 17:52:26 +08:00
2b9ee2a93f
[NANO130] Override wait_ns(...) to provide more accurate implementation
...
NANO100 series doesn't support cache and so cannot provide zero-wait state
flash performance.
2019-07-08 17:52:26 +08:00
a03985ea43
[M2351] Refine wait_ns(...) code
...
1. Add missing header file for mbed_mpu_manager_lock_ram_execution()/
mbed_mpu_manager_unlock_ram_execution() to avoid compile warning.
2. Locate delay_loop_code() on 16-byte boundary (sync to common version).
3. Optimize delay_loop macro (sync to common version).
2019-07-08 17:51:49 +08:00
c9105eb068
PSOC6: use prebuilt CM0+ C arrays instead of HEX images
...
Replace the prebuilt CM0+ HEX images with C files that provide the
variable cy_m0p_image placed to the combined ELF image with linker
script. This simplifies build flow of PSoC 6 application and improves
compatibility with IDE export targets. It is still possible to use
the custom prebuilt HEX images for PSA targets that remove CM0P_SLEEP
label and specify the `hex_filename` in targets.json.
Linker scripts are compatible with both scenarios.
2019-07-08 10:41:02 +01:00
9d983478d7
PSOC6: add psoc6cm0p asset with prebuilt CM0+ C arrays
2019-07-08 10:33:48 +01:00
903085d066
PSOC6: format extra labels for Cypress kits
2019-07-08 10:31:14 +01:00
3d65ace77a
Merge pull request #10950 from artokin/Update_freescale_K6xF_linker_files
...
Enable split heap in K64F/K66F devices
2019-07-08 11:46:30 +03:00
8a3fd6a040
STM32 LPUART update
2019-07-05 17:52:41 +02:00
923be9e20e
NUCLEO_H743ZI: enable WATCHDOG back
2019-07-05 14:44:47 +02:00
8b6d0920a8
STM32H7: Reset Reason update
2019-07-05 14:44:45 +02:00
aa31b1268a
STM32H7 watchdog patch
2019-07-05 14:44:43 +02:00
da9b919268
STM32H7: Increase watchdog timeout value
2019-07-05 14:44:41 +02:00
3384cea281
STM32H7 : add LSI
2019-07-05 14:44:39 +02:00
97d50ed936
Merge pull request #10873 from ganesh-ramachandran/m3hq_newfeatures
...
Add new features to Toshiba's TMPM3HQ
2019-07-05 13:06:46 +01:00
e08b7137a6
Merge pull request #10874 from ganesh-ramachandran/m3h6_newfeatures
...
Add new features to Toshiba's TMPM3H6
2019-07-05 13:06:03 +01:00
d7190c8af4
Adjust K66F GCC_ARM linker file
...
Move heap_0 after .data as it is also placed to m_data.
2019-07-05 14:59:35 +03:00
1eeed8c0e5
Merge pull request #10968 from teetak01/fix-mtb-stm-s2lp-for-client
...
Add FLASHIAP for MTB_STM_S2LP
2019-07-05 11:21:48 +01:00
b47064ae65
Merge pull request #10933 from tymoteuszblochmobica/chache
...
Nordic NRF52832 cache ON
2019-07-05 10:09:59 +01:00
c327f4f070
add new target IM880B
2019-07-05 09:19:51 +01:00
a56247317e
Merge pull request #10798 from ThunderSoft123/master
...
TARGET_TT:Add GPIO INT pin with PT1
2019-07-05 08:57:34 +01:00
0726e2f13b
Add FLASHIAP for MTB_STM_S2LP
...
Fix device management client compilation on MTB_STM_S2LP
Fixes:
./mbed-cloud-client/mbed-client-pal/Source/Port/Reference-Impl/OS_Specific/mbedOS/ROT/pal_plat_rot.cpp:67:5: error: 'DeviceKey' was not declared in this scope
DeviceKey &devkey = DeviceKey::get_instance();
2019-07-05 10:26:26 +03:00
61ad427a35
Changes for RTC peripheral status
2019-07-03 17:58:47 +05:30
b4c0ce3a7e
Changes for RTC peripheral status
2019-07-03 17:57:49 +05:30
3d48b7c1cc
Changes for RTC peripheral status
2019-07-03 17:50:26 +05:30
6841f4a73a
Added new features to TMPM3HQ
2019-07-03 17:18:10 +05:30
bcaeddcb35
Removed dead code in TMPM4G9 - rtc_api.c
2019-07-03 17:10:30 +05:30
6eb07c1beb
ARMC5 updated to ARM for TMPM4G9
2019-07-03 17:10:29 +05:30
4bbc29f32c
Added SPDX identifier
2019-07-03 17:10:29 +05:30
2384b69b16
Added new features to TMPM4G9
2019-07-03 17:10:29 +05:30
2fee8d7390
Added new features to TMPM3H6
2019-07-03 17:01:41 +05:30
608e4c245f
Merge pull request #10938 from tymoteuszblochmobica/iar
...
K64F, STM32F429: IAR linker scripts dynamic heap fix
2019-07-03 12:00:35 +01:00
0e3a96305c
Merge pull request #10939 from AGlass0fMilk/fix-nrf52840-adc-resolution
...
Fix SAADC resolution for nRF52-based targets
2019-07-03 11:47:17 +01:00
ccb63d771e
Merge pull request #10857 from ARMmbed/feature-watchdog
...
Add Watchdog and ResetReason
2019-07-03 11:43:52 +01:00
810cb8de4a
Enable split heap in K64F/K66F devices
...
-Enable MBED_SPLIT_HEAP for K64F and K66F
-Allow GCC_ARM toolchain to utilize remaining 64K memory area
-Make ARM toolchain to start memory filling from 64K region to leave
more space to bigger 192K region.
2019-07-03 11:47:32 +03:00
149d53cc89
Merge pull request #10619 from jamesbeyond/fm-iap
...
Fastmodel: enable flashIAP and kvstore
2019-07-02 14:23:00 +01:00
a84c239830
Merge pull request #10701 from LMESTM/STM_lp_ticker_low_level_wrapper
...
STM: replace C++ low power ticker wrapper with a low level wrapper
2019-07-02 12:50:11 +01:00
fd445a57cb
Watchdog: remove config value for timeout, set it dynamically
...
Use start method to set timeout
2019-07-02 12:46:23 +01:00
7b0915c7d4
Watchdog: refactor driver
...
Watchdog is hardware driver. It interacts with HAL - provides wrapper to interact with the peripheral.
Provides basic functionality: start/stop, get timeout/max timeout.
It is automatically kicked by a timer, according to the timeout set in ctor.
2019-07-02 12:46:23 +01:00
8b49ffc0c3
Merge pull request #10920 from NXPmicro/Update_Kinetis_SDK_Clock_Driver
...
Kinetis MCUXpresso: Update the clock drivers
2019-07-02 12:44:09 +01:00
f2b88362fb
Apply same resolution fix to nRF52832 targets
2019-07-01 12:22:04 -04:00
b08a26bfa0
Fix SAADC resolution set in sdk_config. analogin_read_u16 assumes 12-bit range but config was set to 10 bit range causing incorrect readings to be returned.
2019-07-01 12:09:27 -04:00
83057c95d0
IAR icf linker scripts modified to use dynamic heap allocation of all available memory.
2019-07-01 17:57:40 +02:00
1af0fe89b8
Nordic NRF52832 onboard instruction cache is turned ON to increase MCU performance
2019-07-01 15:08:53 +02:00
1ced842391
STM: Correct macro test in us_ticker_defines.h
...
Avoids build warning caused by #10609
2019-07-01 13:34:55 +03:00
279925b6fc
Merge pull request #10869 from mathias-arm/master
...
LPC55S69: fix cosFactor data size in header file
2019-07-01 09:27:57 +01:00
be2c2bed30
Merge pull request #10884 from jeromecoutant/PR_H743ZI2
...
NUCLEO_H743ZI2 new target support
2019-07-01 09:27:31 +01:00
9e0dc3e198
Merge pull request #10859 from malavikasajikumar/master
...
Removing I2C and SPI pin names in SDP-K1 PinNames.h file.
2019-07-01 09:23:06 +01:00
d71db32154
Merge pull request #10881 from AGlass0fMilk/fix-nrf52-critical-region-api
...
Fix Nordic/Mbed Critical Section API Inconsistency (In Builds w/o Softdevice)
2019-07-01 09:18:10 +01:00
6331034bd1
STM32 with low level ticker wrapper require Extra Idle stack
2019-07-01 09:33:23 +02:00
58a4685811
STM32: lp_ticker optim: initialize handle once only
2019-07-01 09:33:23 +02:00
ee95c7e64a
STM32: lp_ticker optim: remove irq_handler variable
2019-07-01 09:33:23 +02:00
8616cd7655
Update comments and fix typo
2019-07-01 09:33:23 +02:00
501881bf38
Update warning now that C++ wrapper is not needed anymore
...
Now we'd rather not use this wrapper and use instead the low level
wrapper implemented in this driver.
2019-07-01 09:33:22 +02:00
6397a6189f
STM32 targets: remove tickless from us ticker and delay ticker
...
For L0/L4/H7/F7/WB targets that have tickless enabled, remove the tickless from
us ticker and the delay ticks as the C++ wrapper layer is being removed
and replaced by the low layer handling.
For now, the few F4 targets with LPTIM are left with previous configuration
as test results are showing a few instabilities not yet understood.
2019-07-01 09:33:22 +02:00
d4ec62ff0c
Manage lp_ticker delay at low level
...
LP TICKER mbed-os wrapper needs to be disabled as it introduces too much latencies.
LP TICKER wrapper has been disabled and we need to managed the HW constraints at low level:
- main HW constraint is that once the comparator has been programmed once,
driver cannot program it again before CMPOK HW flag is set, which takes about 3 30us cycles.
To make it even more complex, the driver also needs to cope with "LP ticker workaround"
See commit:
LP ticker workaround
There is an errata in LPTIM specification that explains that CMP Flag
condition is not an exact match (COUNTER = MATCH) but rather a
comparison (COUNTER >= MATCH).
Also the disable interrupt is more complete now:
- always check sleep manager status and restore it
- remove irq_handler as comparator is always programed and might get called
eventually when LP TICK is restarted
- reset delayed_prog
Also in set_interrupt, make sure interrupt does not fire early.
If needed, we decide to slightly delay the tick to cope with the HW limitation to
make sure it will fire as soon as HW is capable.
Functions are called under critical section as they may be called from
the IRQ handler now, not only from driver layer.
2019-07-01 09:31:53 +02:00
6452eb3172
LP ticker workaround
...
There is an errata in LPTIM specification that explains that CMP Flag
condition is not an exact match (COUNTER = MATCH) but rather a
comparison (COUNTER >= MATCH).
As a consequence the interrupt is firing early than expected when
programing a timestamp after the 0xFFFF wrap-around.
In order to
work-around this issue, we implement the below work-around.
In case timestamp is after the work-around, let's decide to program the
CMP value to 0xFFFF, which is the wrap-around value. There would anyway be
a wake-up at the time of wrap-around to let the OS update the system time.
When the wrap-around interrupt happen, OS will check the current time and
program again the timestamp to the proper value.
2019-07-01 09:31:53 +02:00
6c674ec0c7
Kinetis MCUXpresso: Update the clock drivers
...
Updated driver includes
1. Bug fixes
2. Formatting updates.
3. Fix for warnings
4. Better code commenting
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2019-06-28 10:09:52 -05:00
85c477c1dc
Merge pull request #10609 from kjbracey-arm/us_ticker_optimise
...
wait_us optimization
2019-06-28 14:29:00 +01:00
61c4d05ce9
Merge pull request #10824 from ABOSTM/PRSTM32_PWMWRTIE_GLITCH_10734
...
STM32: pwmout_write: configure channel only when not already enabled
2019-06-28 14:24:14 +01:00
201a264051
Merge pull request #10791 from hugueskamba/fix-lpc55s69-bootloader-segmentation
...
bootloader: Fix LPC55S69 bootloader segmentation
2019-06-27 10:22:55 +01:00
d4aab5669d
Merge pull request #10888 from devran01/issue/10883
...
Remove macro MBEDTLS_PSA_CRYPTO_C from PSA targets
2019-06-27 10:10:47 +01:00
edeeb33ba7
Update gpio_irq_api.c
2019-06-26 22:33:31 +08:00
b0804c4a0d
bootloader: Fix LPC55S69 bootloader segmentation
...
As the build tool in mbed-os 5.13 cannot appropriately deal with a segmented
bootloader when combining it with an application, this commit adjusts the
size reserved for interrupts (via the linker file) to avoid a bootloader
segmentation due to an unpopulated ROM area.
The microcontroller has a total of 60 vector interrupts + 16 exception
handlers. The allocated ROM flash for interrupts should be (60 + 16) x word
size in bytes = 76 x 4 = 304 = 0x130.
This commit changes the interrupt reserved space from 0x140 to 0x130.
2019-06-26 13:55:07 +01:00
924af9481e
Merge pull request #10841 from VVESTM/vve_10827_spi_count
...
TARGET_STM: Add DEVICE_SPI_COUNT to use SPIs without interference
2019-06-26 09:09:38 +01:00
b0073bb70d
Merge pull request #10774 from fkjagodzinski/fix-uart_irq
...
Fix serial IRQ handling
2019-06-25 15:49:41 +01:00
fa2e0217f2
Merge pull request #10856 from jeromecoutant/PR_CRC_LO
...
STM32: enable CRC for all L0/L4/F7
2019-06-25 11:08:08 +01:00
bd9d615897
Remove MBEDTLS_PSA_CRYPTO_C from PSA NS targets
...
Signed-off-by: Devaraj Ranganna <devaraj.ranganna@arm.com>
2019-06-25 09:55:59 +01:00
cb8f2c07a1
1. Include MBEDTLS_CONFIG_FILE before evaluating MBEDTLS_PSA_CRYPTO_C
...
2. Remove macro MBEDTLS_PSA_CRYPTO_C from PSA targets
Signed-off-by: Devaraj Ranganna <devaraj.ranganna@arm.com>
2019-06-24 14:33:04 +01:00
15cd907d35
Fix alignment
2019-06-24 08:34:54 -04:00
d2ea0f9432
NUCLEO_H743ZI2 new target support
2019-06-24 11:00:58 +02:00
24384a0fa0
Update gpio_irq_api.c
2019-06-23 22:00:51 +08:00
f548f558da
Fixed bug causing Nordic drivers to use a different critical section API from Mbed. This caused conflicts when Nordic's critical section API would globally reenable interrupts while Mbed still expected to be in a critical section.
2019-06-20 14:54:10 -04:00
a339084684
STM32: pwmout_write: configure channel only when not already enabled
...
Fix PWM glitch on write(), TARGET_STM/pwmout_api.c, #10734
2019-06-20 17:49:16 +02:00
fcde82ba4f
HAL I2C: adds missing DEVICE_I2C guards
2019-06-19 23:08:55 +02:00
ccbb26e2f3
LPC55S69: fix cosFactor data size in header file
...
The file 'fsl_powerquad_data.h' declares several dctXXX_cosFactor
arrays with sizes twice larger compared to the actual definitions in
'fsl_powerquad_data.c'.
2019-06-19 15:17:18 -05:00
4bd1d15d01
Merge pull request #10795 from jamesbeyond/fm_m0p_no_mpu
...
FastModel: trun off MPU for FVP_MPS2_M0P
2019-06-19 12:39:17 +01:00
32c8bf5969
Merge pull request #10792 from hugueskamba/fix-lpc55s69-sector-size
...
Fix: Allow target size restriction for LPC55S69
2019-06-19 12:36:22 +01:00
2a7635f536
Merge pull request #10782 from d-kato/rza1_armc6
...
GR_LYCHEE,RZ_A1H,VK_RZ_A1H: Fix greentea test failure with ARMC6
2019-06-19 12:33:28 +01:00
372f9c89fc
Merge pull request #10769 from vmedcy/pr/psoc6-softfp
...
PSOC6: add SOFTFP to standard component list
2019-06-19 12:31:15 +01:00
ac274833f0
Merge pull request #10741 from OpenNuvoton/nuvoton_m2351_wait-ns
...
M2351: Override wait_ns to provide more accurate implementation
2019-06-19 12:22:56 +01:00
07f1e068a9
Merge pull request #10689 from AGlass0fMilk/nrf52840-usbphy-implementation
...
nRF52840 USB Device Implementation
2019-06-18 16:28:20 +01:00
6632282b4a
Removing I2C and SPI pin names in SDP-K1 PinNames.h file.
...
This is to ensure the use of Arduino pin names Dxx for I2C and SPI pins in programs written for SDP-K1 board.
2019-06-18 08:15:01 -07:00
e10d2c8499
STM32: enable CRC for all L0/L4/F7
2019-06-18 13:53:04 +02:00
31eb49b918
TARGET_STM: Add DEVICE_SPI_COUNT to use SPIs without interference
...
Extend to all STM targets the work done on PR10752.
Signed-off-by: Vincent Veron <vincent.veron@st.com>
2019-06-14 14:15:56 +02:00
2ddb55007c
fix IAR compile error on fastmodels
2019-06-14 10:59:16 +03:00
8d15a2342f
STM: optimize us_ticker
...
Provide new optimizations for us_ticker and wait_us.
2019-06-14 10:22:08 +03:00
e5e2e0ac22
Freescale MCUXpresso: optimize us_ticker
...
Provide new optimizations for us_ticker and wait_us.
2019-06-14 10:22:08 +03:00
57310729d4
wait_us optimization
...
As the timer code became more generic, coping with initialization on
demand, and variable width and speed us_ticker_api implementations,
wait_us has gradually gotten slower and slower.
Some platforms have reportedly seen overhead of wait_us() increase from
10µs to 30µs. These changes should fully reverse that drop, and even
make it better than ever.
Add fast paths for platforms that provide compile-time information about
us_ticker. Speed and code size is improved further if:
* Timer has >= 2^32 microsecond range, or better still is 32-bit 1MHz.
* Platform implements us_ticker_read() as a macro
* Timer is initialised at boot, rather than first use
The latter initialisation option is the default for STM, as this has
always been the case.
2019-06-14 10:22:08 +03:00
5a8f795976
Merge pull request #10804 from VVESTM/vve_fix_10589
...
TARGET_STM: SPI: update pull up config depending on clk polarity
2019-06-14 07:45:25 +01:00
016ab2a417
[Nuvoton] Fix channel release in analogout_free()
2019-06-13 18:11:50 +08:00
4ad71c4d65
Merge pull request #10802 from Patater/update-to-mbedtls-2.18.0rc4
...
Update to mbedtls 2.18.0rc3
2019-06-12 16:09:02 +01:00
378e997e25
Merge pull request #10753 from desmond-blue/feature-fix-nrf52-uart-count
...
Fix nrf52 enabled uart count and enable uart0/1
2019-06-12 14:50:12 +01:00
39ea40fed3
psa: Avoid re-definition of MBEDTLS_PSA_CRYPTO_C
...
Mbed TLS now enables PSA APIs by default on all targets. It's not
necessary to explicitly enable MBEDTLS_PSA_CRYPTO_C, as that can be
gotten from the Mbed TLS config.h.
However, many PSA targets depend on `-DMBEDTLS_PSA_CRYPTO_C` being
defined by the Mbed OS json configuration system and are not yet
properly including the Mbed TLS configuration; for these PSA targets,
warnings may remain until this issue is fixed.
Avoiding re-definition will eliminate warnings like the following, when
building mbed-os-example-blinky:
Compile [ 14.5%]: pal_client_api_empty_intf.c
[Warning] pal_client_api_intf.h@35,0: "PSA_SUCCESS" redefined
Compile [ 14.6%]: pal_client_api_intf.c
Compile [ 14.7%]: DeviceKey.cpp
Compile [ 14.9%]: pal_internal_trusted_storage_intf.c
[Warning] pal_internal_trusted_storage_intf.c@45,9: 'psa_its_set' is deprecated: PS specific types should not be used [-Wdeprecated-declarations]
Compile [ 15.3%]: val_attestation.c
[Warning] client.h@40,0: "PSA_VERSION_NONE" redefined
<..>
Compile [ 33.3%]: asn1parse.c
[Warning] config.h@2838,0: "MBEDTLS_PSA_CRYPTO_C" redefined
Compile [ 33.5%]: aes.c
[Warning] config.h@2838,0: "MBEDTLS_PSA_CRYPTO_C" redefined
Compile [ 33.6%]: asn1write.c
[Warning] config.h@2838,0: "MBEDTLS_PSA_CRYPTO_C" redefined
Compile [ 33.7%]: psa_crypto.c
[Warning] config.h@2838,0: "MBEDTLS_PSA_CRYPTO_C" redefined
Compile [ 33.8%]: blowfish.c
[Warning] config.h@2838,0: "MBEDTLS_PSA_CRYPTO_C" redefined
Compile [ 33.9%]: camellia.c
[Warning] config.h@2838,0: "MBEDTLS_PSA_CRYPTO_C" redefined
Compile [ 34.0%]: base64.c
[Warning] config.h@2838,0: "MBEDTLS_PSA_CRYPTO_C" redefined
Compile [ 34.2%]: ccm.c
[Warning] config.h@2838,0: "MBEDTLS_PSA_CRYPTO_C" redefined
Compile [ 34.3%]: chacha20.c
[Warning] config.h@2838,0: "MBEDTLS_PSA_CRYPTO_C" redefined
Compile [ 34.4%]: chachapoly.c
[Warning] config.h@2838,0: "MBEDTLS_PSA_CRYPTO_C" redefined
Compile [ 34.5%]: cipher_wrap.c
[Warning] config.h@2838,0: "MBEDTLS_PSA_CRYPTO_C" redefined
Compile [ 34.6%]: cmac.c
[Warning] config.h@2838,0: "MBEDTLS_PSA_CRYPTO_C" redefined
Compile [ 34.7%]: cipher.c
[Warning] config.h@2838,0: "MBEDTLS_PSA_CRYPTO_C" redefined
Compile [ 34.9%]: bignum.c
[Warning] config.h@2838,0: "MBEDTLS_PSA_CRYPTO_C" redefined
Compile [ 35.0%]: des.c
[Warning] config.h@2838,0: "MBEDTLS_PSA_CRYPTO_C" redefined
Compile [ 35.1%]: dhm.c
[Warning] config.h@2838,0: "MBEDTLS_PSA_CRYPTO_C" redefined
Compile [ 35.2%]: ctr_drbg.c
<..>
Compile [ 70.9%]: EthernetInterface.cpp
[Warning] config.h@2838,0: "MBEDTLS_PSA_CRYPTO_C" redefined
Compile [ 71.0%]: InternetSocket.cpp
Compile [ 71.1%]: L3IPInterface.cpp
[Warning] config.h@2838,0: "MBEDTLS_PSA_CRYPTO_C" redefined
Compile [ 71.2%]: NetworkInterface.cpp
2019-06-12 12:47:20 +01:00
d5624b6ec6
Fix nrf52 enabled uart count and enable uart0/1
2019-06-12 15:36:09 +08:00
09ea361c7e
Merge pull request #10790 from jeromecoutant/PR_H7_LPUART
...
STM32H7 enable LPUART
2019-06-11 09:06:22 +01:00
94d2a42fd5
Merge pull request #10793 from jeromecoutant/PR_STM32WARNING
...
STM32: remove compilation warnings
2019-06-11 07:36:47 +01:00
fbcae489a0
Merge pull request #10762 from mprse/reenable_tests
...
Disable only time drifting test cases and fix GREENTEA_SETUP() call in tests
2019-06-11 07:35:41 +01:00
4f107cc061
Add GPIO INT pin with PT1
2019-06-10 09:46:04 +08:00
9dfc8d0ea7
Merge pull request #10775 from jeromecoutant/PR_H7_REFACTOR
...
STM32H7: refactor TARGET directory
2019-06-09 18:22:04 +01:00
356c4fb7cb
Merge pull request #10758 from toyowata/stm32f407xe
...
Move Seeed ARCH_MAX to TARGET_STM32F407xE MCU
2019-06-09 18:20:03 +01:00
dbe274ccf0
Merge pull request #10757 from petroborys/master
...
Add support I2C 3 for target EFM32G11
2019-06-09 18:19:42 +01:00
9ab0e09699
Merge pull request #10752 from teijokinnunen/stm32l0_target_spi_count
...
STM32L0: Add DEVICE_SPI_COUNT to DISCO_L072CZ_LRWAN1 + MTB_MURATA_ABZ
2019-06-09 18:19:34 +01:00
5581da56c9
Merge pull request #10751 from ThunderSoft123/master
...
TARGET_TT:Setting wisely pin mode for TT_M3HQ.
2019-06-09 18:19:05 +01:00
b683f4252e
Merge pull request #10739 from OpenNuvoton/nuvoton_m487_wait-ns
...
M487: Fix wait_ns test failed
2019-06-09 18:16:34 +01:00
ced4c3f4e4
Merge pull request #10708 from VVESTM/vve_fix_10671
...
TARGET_STM: SPI: add pulse on master transmissions
2019-06-09 18:10:42 +01:00
dda79d4d23
Merge pull request #10695 from Ronny-Liu/master
...
GD32_F450ZI : Add bootloader support
2019-06-09 18:06:25 +01:00
dc77c40fe9
Merge pull request #10709 from LDong-Arm/nrf52_cordio
...
Default to Cordio BLE stack for NRF52* targets
2019-06-09 18:03:34 +01:00
288a685be4
modify targets.json to trun off MPU
2019-06-07 18:36:13 +01:00
153ea175e8
correct CMSDK for M0Plus due to MPU is not presented
2019-06-07 18:35:25 +01:00
5ac7c8c77e
STM32WB warning compilation
...
[-Wparentheses-equality]
2019-06-07 18:11:16 +02:00
ddcc63276a
STM32H7 warning compilation
...
[-Wparentheses-equality]
2019-06-07 18:11:04 +02:00
39ee51a017
STM32L4 warning compilation
...
[-Wparentheses-equality]
2019-06-07 18:10:17 +02:00
43a304351a
STM32L1 warning compilation
...
[-Wparentheses-equality]
2019-06-07 18:10:17 +02:00
daf8d114c4
STM32L0 warning compilation
...
[-Wparentheses-equality]
2019-06-07 18:10:17 +02:00
7d05f22b31
STM32F7 warning compilation
...
[-Wparentheses-equality]
[-Wsign-compare]
2019-06-07 18:10:03 +02:00
09a58b5203
STM32F4 warning compilation
...
[-Wparentheses-equality]
2019-06-07 18:08:51 +02:00
89f554fb53
STM32F3 warning compilation
...
[-Wparentheses-equality]
2019-06-07 18:08:51 +02:00
f3c7cc9d47
STM32F2 warning compilation
...
[-Wparentheses-equality]
2019-06-07 18:08:51 +02:00
8c2ee68be1
STM32F1 warning compilation
...
[-Wparentheses-equality]
2019-06-07 18:08:50 +02:00
7154ac65f2
STM32F0 warning compilation
...
[-Wparentheses-equality]
2019-06-07 18:08:50 +02:00
5d80f9e98f
STM32: remove compilation warning
2019-06-07 18:08:39 +02:00
a90e68e788
STM32H7 UART: enable LPUART
2019-06-07 18:05:06 +02:00
06c3a5bf25
Fix: Allow target size restriction for LPC55S69
...
The build tool uses the sector size found in the CMSIS Pack to determine if
the size that can be specified by `target.restrict_size` is enough to fit
all the parts of a given binary. See `target.restrict_size` documentation
in the Mbed OS manual for more information.
The sector size found in the CMSIS Pack is overriden to allow the build
tool to accurately make the decision.
The target's sectors in the CMSIS Pack are defined in 32KB pages.
However, you can erase pages at the 512 byte level.
This commit changes defined sector erase size to 512 bytes instead of
32 Kilobytes.
2019-06-07 16:57:25 +01:00
8e3ca20817
K82F: Fix serial IRQ handling
...
Check that the RX or TX interrupt is enabled before calling
a registered handler with RxIrq or TxIrq arg.
2019-06-07 16:47:59 +02:00
3119d69f0e
KL27Z: Fix serial IRQ handling
...
Check that the RX or TX interrupt is enabled before calling
a registered handler with RxIrq or TxIrq arg.
2019-06-07 16:46:53 +02:00
9efaabe404
K66F: Fix serial IRQ handling
...
Check that the RX or TX interrupt is enabled before calling
a registered handler with RxIrq or TxIrq arg.
2019-06-07 16:41:36 +02:00
68269672c4
KL43Z: Fix serial IRQ handling
...
Check that the RX or TX interrupt is enabled before calling
a registered handler with RxIrq or TxIrq arg.
2019-06-07 16:41:09 +02:00
5f95c5fc85
KL82Z: Fix serial IRQ handling
...
Check that the RX or TX interrupt is enabled before calling
a registered handler with RxIrq or TxIrq arg.
2019-06-07 16:37:49 +02:00
0b33e8f976
KW24D: Fix serial IRQ handling
...
Check that the RX or TX interrupt is enabled before calling
a registered handler with RxIrq or TxIrq arg.
2019-06-07 16:35:36 +02:00
96b6cd3ee6
KW41Z: Fix serial IRQ handling
...
Check that the RX or TX interrupt is enabled before calling
a registered handler with RxIrq or TxIrq arg.
2019-06-07 16:33:42 +02:00
01e130ba83
K24F: Fix serial IRQ handling
...
Check that the RX or TX interrupt is enabled before calling
a registered handler with RxIrq or TxIrq arg.
2019-06-07 16:19:25 +02:00
f60850ad50
K22F: Fix serial IRQ handling
...
Check that the RX or TX interrupt is enabled before calling
a registered handler with RxIrq or TxIrq arg.
2019-06-07 16:17:07 +02:00
14b83e7fdf
STM32WB: Fix serial IRQ handling
...
Check that the RX or TX interrupt is enabled before calling
a registered handler with RxIrq or TxIrq arg.
2019-06-07 15:36:21 +02:00
53222fa448
STM32L4: Fix serial IRQ handling
...
Check that the RX or TX interrupt is enabled before calling
a registered handler with RxIrq or TxIrq arg.
2019-06-07 15:33:49 +02:00
fa0cc68657
STM32H7: Fix serial IRQ handling
...
Check that the RX or TX interrupt is enabled before calling
a registered handler with RxIrq or TxIrq arg.
2019-06-07 15:30:03 +02:00
d6a48218ee
STM32F3: Fix serial IRQ handling
...
Check that the RX or TX interrupt is enabled before calling
a registered handler with RxIrq or TxIrq arg.
2019-06-07 15:26:20 +02:00
b88b94eb75
STM32L0: Fix serial IRQ handling
...
Check that the RX or TX interrupt is enabled before calling
a registered handler with RxIrq or TxIrq arg.
2019-06-07 15:17:22 +02:00
c387bd889f
STM32F0: Fix serial IRQ handling
...
Check that the RX or TX interrupt is enabled before calling
a registered handler with RxIrq or TxIrq arg.
2019-06-07 15:17:17 +02:00
84384162bb
STM32F7: Fix serial IRQ handling
...
Check that the RX or TX interrupt is enabled before calling
a registered handler with RxIrq or TxIrq arg.
2019-06-07 15:17:07 +02:00
94c27aa750
K64F: Fix serial IRQ handling
...
Check that the RX or TX interrupt is enabled before calling
a registered handler with RxIrq or TxIrq arg.
2019-06-07 15:17:07 +02:00
4dc3b0e269
Fix bugs by optimization
2019-06-07 11:14:03 +09:00
86dab2f9fa
Disable time drifting test cases.
...
Time drifting test cases use serial communication with the host and are unstable on CI.
Skip time-drifting test cases if SKIP_TIME_DRIFT_TESTS macro is defined.
The idea for the future is to use FPGA test shield for timing tests instead of host scripts.
Also remove `__ARM_FM` macro which in most cases was used to disable time drifting tests. In other cases replace `__ARM_FM` with `TARGET_ARM_FM` which is more suitable.
2019-06-06 21:48:04 +02:00
07c3d90a5c
FastModel: change Fastmodel memory layout regions from 3 to 2
...
- change memoryzones.h
- change linker scripts for each toolchains
2019-06-06 18:54:59 +01:00
2e4329192e
FastModel: enable FLASHIAP componment
2019-06-06 18:52:30 +01:00
82979f6415
TARGET_STM: SPI: update pull up config depending on clk polarity
...
Fix #10589
Signed-off-by: Vincent Veron <vincent.veron@st.com>
2019-06-06 17:06:04 +02:00
489bd10626
Merge pull request #10629 from trowbridgec/add-target-ep-agora
...
Add support for the Embedded Planet Agora target
2019-06-06 14:50:14 +01:00
25e4316963
STM32H7 directory cleanup and refactoring
2019-06-06 10:48:11 +02:00
119ff51fee
STM32H7: use default files from ST drivers delivery
2019-06-06 10:48:09 +02:00
5b53b3aae0
STM32: define USE_FULL_LL_DRIVER at top level
2019-06-06 10:48:08 +02:00
ed81f8e428
Setting wisely pin mode for TT_M3HQ
2019-06-06 10:16:31 +08:00
f4bfbf3056
PSOC6: add SOFTFP to standard component list
...
This allows Cypress to deliver middleware libraries with
precompiled libraries for SoftFP ahd HardFP, separated by
component-specific sub-directories:
COMPONENT_SOFTFP/TOOLCHAIN_GCC_ARM/libcy_capsense.a
COMPONENT_HARDFP/TOOLCHAIN_GCC_ARM/libcy_capsense.a
2019-06-05 16:32:16 +03:00
f1628f0b8d
Correct SPDX identifiers
2019-06-05 19:04:55 +09:00
ffcceb0cb7
Default to Cordio BLE stack for NRF52* targets
...
The BLE stack from SoftDevice is not actively maintained and
has issues when used with Nordic SDK v15.
2019-06-05 09:53:53 +01:00
9acf2c325c
Fix device_name and add SPDX identifiers
2019-06-05 16:48:08 +09:00
f0a06b24ba
Remove ARCH_MAX files from STM32F407xG
2019-06-05 14:51:06 +09:00
db2cac45f1
Move Seeed ARCH_MAX to TARGET_STM32F407xE MCU
2019-06-05 14:35:25 +09:00
54fe348078
Add support I2C 3 (#ifdef I2C2) for target EFM32G11
2019-06-04 14:31:33 +00:00
728c01f9e3
STM32L0: Add DEVICE_SPI_COUNT to DISCO_L072CZ_LRWAN1 + MTB_MURATA_ABZ
...
Enables simultaneous use of both SPIs without interference.
2019-06-04 09:38:20 +03:00
7447cac66c
Cypress: Fix issue #10613
2019-06-03 16:26:52 +03:00
400b2ee8a7
Add HwWatchdog
...
- mbed_watchdog_mgr has interface name mbed_wdog_manager_start(),mbed_wdog_manager_stop(),mbed_wdog_manager_kick()
- HwWatchdog is going to attach with LowPowerTIcker for periodic callback functionality
- mbed_wdog_manager_start() will either get start either by BL/RTOS Aps,it reads the timeout value specified via macro and macro gets defined in target.json file.
- mbed_wdog_manager_start() internally configure below HAL hw watchdog with timeout specified via target.json
- mbed_wdog_manager_start() internally divide the timeout(specified in target.json) by the 2 and attach LowPowerTicker with periodic callback of hw_kick()
- mbed_wdog_manager_start() internally create one instance of sw watchdog class,to access the static list data structure of sw watchdog class
- mbed_wdog_manager_kick() function periodically get called and refresh the hw watchdog to avoid watchdog reset
- converted C++ code into C based APIs
- added boolean to control watchdog start and stop
- Added detach from ticker on stop API
2019-06-03 15:23:56 +02:00
197b328944
[M2351] Override wait_ns to provide more accurate implementation
...
At high HCLK rate, M2351 cannot provide zero-wait-state flash performance. Besides,
cache is forcibly turned off for non-secure land for internal reason. We locate
'delay_loop_code' from flash to SRAM to achieve zero-wait-state performance.
2019-06-03 16:47:14 +08:00
16475829f1
TARGET_STM: SPI: add pulse on master transmissions
...
Add a pulse when using hardware chip select for SPI transmissions.
CS is at low level when a transmission is on-going.
Be careful, this is not compatible with all modes. It will work only
if PHA is 0, ie spi mode is 0 or 2. See stm32xx reference manual,
chapter "NSS pulse mode" for more details.
Fix #10671
Signed-off-by: Vincent Veron <vincent.veron@st.com>
2019-06-03 10:00:06 +02:00
93e4a8251c
Merge pull request #10697 from jeromecoutant/PR_H7FLASH
...
STM32H7: flash issue while erasing sector in Bank 1
2019-06-03 08:35:29 +01:00
010f4225a0
[M487] Fix wait_ns test failed
2019-06-03 11:28:26 +08:00
cea7bbd815
Remove component 'QSPIF' for target 'EP_AGORA'
2019-05-31 09:58:23 -04:00
8a5f25c2ea
Merge pull request #10663 from vmedcy/psoc6-cmsis
...
PSOC6: move cmsis.h and device.h out from psoc6pdl directory
2019-05-31 12:35:26 +01:00
8aeba87f25
Merge pull request #10674 from ThunderSoft123/master
...
TARGET_TT: adding switches to PinNames
2019-05-31 12:35:10 +01:00
7ebadbfac3
Merge pull request #10676 from jeromecoutant/PR_COMMON_CMSIS
...
STM32: common cmsis.h and device.h files
2019-05-31 12:34:53 +01:00
99b19098b8
Merge pull request #10686 from ale87jan/master
...
MAX32630.sct fix
2019-05-31 12:34:01 +01:00
7531c2bb56
Remove unneeded custom_board.h file
2019-05-30 14:16:29 -04:00
f4e6966e14
Remove RESET_REASON from MCU_NRF52840
2019-05-29 10:25:51 +02:00
58994d88cd
STM32H7: flash issue while erasing sector in Bank 1
2019-05-29 09:31:30 +02:00
8dabdd7bed
bootloader support for GD32_F450ZI
2019-05-29 14:40:03 +08:00
9cc1caa031
Merge pull request #10596 from kjbracey-arm/sem_acquire
...
Introduce Semaphore::acquire methods
2019-05-29 06:22:30 +01:00
67cc3b0faf
Added spdx identifiers and fixed indentation in targets.json
2019-05-28 10:48:09 -04:00
5386b87693
Removing systick edit from sdk_config.h
2019-05-28 10:48:09 -04:00
d8fbdfcac3
Disabling systick
2019-05-28 10:48:09 -04:00
058060711d
Revert adding USB to STM32F407VG target
2019-05-28 10:48:09 -04:00
002df471e0
Changed formatting, check if endpoint is stalled in unstall. Added errata header
2019-05-28 10:48:09 -04:00
1ab27aff1f
Finished compatibility changes for nrfx renaming
2019-05-28 10:48:09 -04:00
2bd024d174
Fixing compatibilities with new nrfx drivers
2019-05-28 10:48:09 -04:00
09c5982a4b
Added EP0 stalls to setup event handler
2019-05-28 10:48:09 -04:00
bd2605cce9
Configured sdk for enabling USB. Preliminary implementation of USB for nRF52840
2019-05-28 10:48:09 -04:00
2fbbd9d2ca
Introduce Semaphore::acquire methods
...
Deprecate wait() in favour of acquire(), try_acquire(),
try_acquire_for() and try_acquire_until().
Brings Semaphore more into line with CMSIS-RTOS 2 (which uses "acquire"),
itself (as it has "release"), and other classes having "try", "try for"
and "try until".
Also steps away from vague "wait" term - the primary operation here is
to acquire the semaphore, and this will of course sleep.
2019-05-28 17:02:06 +03:00
2d492e1166
Update MAX3263x.sct
2019-05-28 12:02:51 +02:00
19e762298f
Merge pull request #10666 from ARMmbed/feature-nrf52-sdk15
...
Nordic SDK v15 Update
2019-05-28 09:48:44 +01:00
d919498745
STM32: common cmsis.h and device.h
2019-05-27 16:27:41 +02:00
61f9a1c362
KW41Z: Add a GPIO pinmap for testing
2019-05-27 14:57:01 +02:00
1a9b635e7d
KW24D: Add a GPIO pinmap for testing
2019-05-27 13:21:43 +02:00
e0eefaed99
Modifiying file PinNames.h
2019-05-27 11:02:43 +08:00
a326db8b77
K64F: Use a common peripheral name in GPIO pinmap
...
This was unnecessary since all the pins may be used independently.
2019-05-24 16:33:01 +02:00
c870d6f1ba
PSOC6: move cmsis.h and device.h out from psoc6pdl directory
...
This simplifies updating of psoc6pdl directory to the latest Cypress
PSoC 6 PDL releases. cmsis.h and device.h are not part of psoc6pdl.
2019-05-24 15:16:37 +03:00
ab82f1fca6
Merge pull request #10627 from devran01/remove_future_sequana_target
...
Remove targets FUTURE_SEQUANA_M0_PSA and FUTURE_SEQUANA_PSA
2019-05-24 12:16:10 +01:00
727070e04a
Removed RESET_REASON for NRF51_DK board
2019-05-24 12:32:53 +02:00
50c6e9f481
Added the SPDX identifier
2019-05-24 12:32:53 +02:00
15bcb38fad
Trailing space issue fix
2019-05-24 12:32:52 +02:00
af0b056b05
fix for Jenkin build issue
2019-05-24 12:32:51 +02:00
7d5a17d955
Removed RESET_REASON for NRF52832,NRF52840 family and Removed WATCHDOG for H743ZI board
2019-05-24 12:32:50 +02:00
8393068770
Revert "fix for build failure issues"
...
This reverts commit 3ce1d4940cb7fd9d74ca2be75ed08b76854ff534.
2019-05-24 12:32:45 +02:00
e13fdc444f
fix for build failure issues
2019-05-24 12:31:28 +02:00
f4184b19a0
update:Remove DEVICE_WATCHDOG and added RESET_RESON in stm32 family
2019-05-24 12:28:20 +02:00
ad295e64ba
fix(hal-watchdog): Guard TMPM 'ResetReason' code behind feature flag
2019-05-24 12:23:43 +02:00
a63e236d84
fix(hal-watchdog): Add 'RESET_REASON' flags to supported devices
2019-05-24 12:23:42 +02:00
8baae2475a
fix(hal-watchdog): Remove 'RESET_REASON' flags from unsupported devices
2019-05-24 12:23:41 +02:00
544eb82a47
fix: Remove excess comma from device_has key in targets.json
2019-05-24 12:23:41 +02:00
a0c2b59475
Added reset_reason feature for TMPM3HQ
2019-05-24 12:23:39 +02:00
7f47b0a65c
fix(hal-watchdog): Add feature guards to K64F watchdog implementation
2019-05-24 12:23:35 +02:00
5fc77d3c4a
Added reset_reason feature for TMPM3H6 & TMPM4G9
2019-05-24 12:23:33 +02:00
f6fcabb9b8
Added reset_reason feature for TMPM066 & TMPM46B
2019-05-24 12:23:29 +02:00
84440531f1
[Nuvoton] Support watchdog timer
2019-05-24 12:20:01 +02:00
6e514b6e08
[Nuvoton] Support reset reason
2019-05-24 11:35:44 +02:00
717979075f
[NUC472] Fix WDT driver in BSP
2019-05-24 11:35:43 +02:00
a6a34722ca
fix bugs introduced on rebase
2019-05-24 11:35:43 +02:00
570e9b0bf4
STM32 WATCHDOG : increase timeout value
2019-05-24 11:35:42 +02:00
4300e5d6c4
STM32 WATCHDOG : use ST HAL in order to make code commun for all STM32
2019-05-24 11:35:41 +02:00
feec85cc37
STM32 WATCHDOG : update STM32L0 HAL_IWDG_Init to a newest version
2019-05-24 11:35:41 +02:00
e29d64fc19
STM32 WATCHDOG : compilation issue with typed define
2019-05-24 11:35:40 +02:00
1b8513a5a8
STM32 Watchdog : move API file to STM family level
2019-05-24 11:35:39 +02:00
ce574b5eef
NCS36510: Added watchdog implementation.
2019-05-24 11:35:38 +02:00
c7bc7e5122
Add implementation of reset reason on Silicon Labs parts
2019-05-24 11:35:38 +02:00
295c79ab0a
Add support for watchdog on Silicon Labs devices
2019-05-24 11:35:37 +02:00
3d31801f4f
STM: HAL: Reset_reason: Correct return values
2019-05-24 11:35:35 +02:00
585edc1f43
Disable Watchdog on Odin as it fails intermittently
2019-05-24 11:35:32 +02:00
4ed0b948f4
K64F: watchdog HAL: Fix init() and stop()
...
Added a missing wait for the WCT window end. Without it, consecutive
init() or stop() calls were ignored.
2019-05-24 11:35:30 +02:00
d26dba40b2
STM32F4: watchdog HAL: Fix issues found with tests
...
Fix WATCHDOG_STATUS_INVALID_ARGUMENT for timeout values from 1 ms to
407 ms (fix inability to set prescaler bits to zero).
Fix timeout <-> IWDG registers conversions.
Fix read & write access to IWDG_PR and IWDG_RLR registers.
Fix LSI RC frequency setting.
Limit MAX_TIMEOUT_MS to UINT32_MAX.
2019-05-24 11:35:29 +02:00
2fb9fc2a8e
Rename watchdog.c -> watchdog_api.c to prevent name collision with Platform API
2019-05-24 11:35:25 +02:00
9d571cd617
Add RESET_REASON and WATCHDOG definitions to hexiwear build target
2019-05-24 11:35:24 +02:00
90bb2929e0
K64F: watchdog HAL: Fix max_timeout.
...
Limit MAX_TIMEOUT_MS to UINT32_MAX.
Improve MAX_TIMEOUT_MS handling.
Fix hal_watchdog_get_platform_features() returning
.max_timeout = 0xfffffff8 instead of 0xffffffff.
2019-05-24 11:35:23 +02:00
2ab738fc66
Fix Watchdog::stop on K64F target
...
WDOG_Disable will suspend the watchdog until a reset is triggered instead of stopping it altogether. Deinit will disable it until it is reinitialized.
2019-05-24 11:35:22 +02:00
e7761a1d39
Move watchdog parameter validation into the driver layer
2019-05-24 11:35:22 +02:00
31924b2481
Add missing license headers
2019-05-24 11:35:21 +02:00
7c392a16d4
Remove window and sleep mode options for watchdog API
2019-05-24 11:35:13 +02:00
8fa38bb25b
Add Watchdog driver API
2019-05-24 11:20:26 +02:00
366893ae71
Add independent watchdog reference implementation for STM32
2019-05-24 11:20:25 +02:00
6b3d790fc1
Add function to fetch platform specific reset reason register values
2019-05-24 11:20:24 +02:00
1ec22fee05
Add reset reason reference implementation STM32
2019-05-24 11:20:23 +02:00
8a97101988
Fix watchdog API issues
...
- Fix typo in module comment
- Redefine the default system behaviour in sleep mode
- Guard K64F enableWait flag
- Remove bit shifts from reset reason enum
2019-05-24 11:20:22 +02:00
Mahesh Mahadevan
Seppo Takalo
Lin Gao
George Beckstein
Evelyne Donnaes
maclobdell
Arto Kinnunen
jeromecoutant
Martin Kojtal
Kevin Bracey
Yuan Cao
Chun-Chieh Li
Volodymyr Medvid
Volodymyr Medvid
Tymoteusz Bloch
Steven Cooreman
Filip Jagodzinski
Przemyslaw Stekiel
itziar
Teemu Takaluoma
Ganesh Ramachandran
Tymoteusz Bloch
Laurent Meunier
ThunderSoft_mbed_os
Hugues Kamba
Devaraj Ranganna
George Beckstein
Alexandre Bourdiol
Maciej Bocianski
Mathias Brossard
Anna Bridge
Malavika Sajikumar
Vincent Veron
Qinghao Shi
Jaeden Amero
desmond.chen
panyz0725@thundersoft.com
d-kato
toyowata
Lingkai Dong
petroborys
Teijo Kinnunen
Hennadiy Kytsun
Rajkumar Kanagaraj
Chris Trowbridge
Ronny Liu
ale87jan
Steve Cartmell
Lukas Mandak
Filip Jagodzinski
Bartek Szatkowski