ebff1e553b
Merge pull request #8213 from jeromecoutant/PR_RTC_F1
...
STM32F1 RTC : save values in register
2018-10-10 15:46:26 -05:00
9f98d39d1f
Merge pull request #8122 from thesupershan/master
...
LPC1768 us_ticker.c timer choice
2018-10-10 11:07:26 -05:00
37bfc9e5e3
Reposition heap at the end of RAM to be 4K aligned
...
HEAP memory should be 4K aligned for GCC newlib, with ISR stack at the end of
RAM memory we loose 3K of RAM memory. This fix is for device with <16K RAM to
use RAM entirely.
2018-10-10 10:10:43 -05:00
73f1d4cabd
Merge pull request #8186 from deepikabhavnani/freescale_align_fix
...
Freescale/NXP: Fix alignment of execute region to 8byte boundary
2018-10-10 08:43:51 -05:00
ab064df2fa
Merge pull request #8024 from deepikabhavnani/fix_align
...
Fix alignment of execute region to 8byte boundary
2018-10-10 08:41:40 -05:00
4903f324a1
Merge pull request #8013 from deepikabhavnani/stm_fix_align
...
STM32: Fix alignment of execute region to 8byte boundary
2018-10-10 08:40:55 -05:00
dc4557939f
Remove DISCO-L476VG-IOT01A board from QSPI test (IOTSTOR-666 Issue)
2018-10-10 16:36:40 +03:00
473f8d3f94
Fixing the order of component if more than one is included for a target.
...
Revert deprecation of FlashIAPBlockDevice 2 argument constructor has this was a breaking change. This follows a similar change in the external flashiap-driver repo.
2018-10-10 12:32:08 +03:00
bf1a2c8485
[ST]: Fix alignment of execute region to 8-byte boundary in ARM linker files
...
--legacyalign, --no_legacyalign are deprecated from ARMC6 compiler, in order to
remove deprecated flags all linker files should strictly align to 8-byte boundary
2018-10-09 14:47:14 -05:00
7c1cdc85ed
Merge pull request #8225 from juhoeskeli/IAR_STM32F412xG
...
Adjust stack & heap for IAR on STM32F412xG
2018-10-09 10:34:25 -05:00
17762b4998
Merge pull request #8263 from juhoeskeli/flash_api_stm32l4
...
STM32L4: clear error programming flags before erase & program operations
2018-10-09 10:33:50 -05:00
18d613111f
Merge pull request #8286 from jeromecoutant/PR_RTCWRITE
...
STM32 RTC : write RTC time while LPTICKER is enabled
2018-10-09 10:33:37 -05:00
08051f5c23
SiLabs: Fix alignment of execute region to 8-byte boundary
...
--legacyalign, --no_legacyalign are deprecated from ARMC6 compiler, in order to
remove deprecated flags all linker files (GCC and IAR as well to have uniformity)
should strictly align to 8-byte boundary
2018-10-09 10:15:07 -05:00
4566241849
Ublox: Fix alignment of execute region to 8-byte boundary
...
--legacyalign, --no_legacyalign are deprecated from ARMC6 compiler, in order to
remove deprecated flags all linker files (GCC and IAR as well to have uniformity)
should strictly align to 8-byte boundary
2018-10-09 10:15:07 -05:00
1a6048f9c6
Realtek: Fix alignment of execute region to 8-byte boundary
...
--legacyalign, --no_legacyalign are deprecated from ARMC6 compiler, in order to
remove deprecated flags all linker files (GCC and IAR as well to have uniformity)
should strictly align to 8-byte boundary
2018-10-09 10:15:07 -05:00
05fe53a2c5
Wiznet: Fix alignment of execute region to 8-byte boundary
...
--legacyalign, --no_legacyalign are deprecated from ARMC6 compiler, in order to
remove deprecated flags all linker files (GCC and IAR as well to have uniformity)
should strictly align to 8-byte boundary
2018-10-09 10:15:07 -05:00
2d95fcb9cf
Onsemi: Fix alignment of execute region to 8-byte boundary
...
--legacyalign, --no_legacyalign are deprecated from ARMC6 compiler, in order to
remove deprecated flags all linker files (GCC and IAR as well to have uniformity)
should strictly align to 8-byte boundary
2018-10-09 10:15:07 -05:00
26dc7bd562
Analog Devices: Fix alignment of execute region to 8-byte boundary
...
--legacyalign, --no_legacyalign are deprecated from ARMC6 compiler, in order to
remove deprecated flags all linker files (GCC and IAR as well to have uniformity)
should strictly align to 8-byte boundary
2018-10-09 10:15:07 -05:00
d120222b6c
Renesas: Fix alignment of execute region to 8-byte boundary
...
--legacyalign, --no_legacyalign are deprecated from ARMC6 compiler, in order to
remove deprecated flags all linker files (GCC and IAR as well to have uniformity)
should strictly align to 8-byte boundary
2018-10-09 10:15:07 -05:00
2a8ae84cb1
ARM: Fix alignment of execute region to 8-byte boundary
...
--legacyalign, --no_legacyalign are deprecated from ARMC6 compiler, in order to
remove deprecated flags all linker files (GCC and IAR as well to have uniformity)
should strictly align to 8-byte boundary
2018-10-09 10:15:07 -05:00
a6997ab970
Maxim: Fix alignment of execute region to 8-byte boundary
...
--legacyalign, --no_legacyalign are deprecated from ARMC6 compiler, in order to
remove deprecated flags all linker files (GCC and IAR as well to have uniformity)
should strictly align to 8-byte boundary
2018-10-09 10:15:07 -05:00
5a25fd9ff3
Atmel: Fix alignment of execute region to 8-byte boundary
...
--legacyalign, --no_legacyalign are deprecated from ARMC6 compiler, in order to
remove deprecated flags all linker files (GCC and IAR as well to have uniformity)
should strictly align to 8-byte boundary
2018-10-09 10:15:07 -05:00
8c17ff6168
Toshiba: Fix alignment of execute region to 8-byte boundary
...
--legacyalign, --no_legacyalign are deprecated from ARMC6 compiler, in order to
remove deprecated flags all linker files (GCC and IAR as well to have uniformity)
should strictly align to 8-byte boundary
2018-10-09 10:15:07 -05:00
61404e62d8
Nordic: Fix alignment of execute region to 8-byte boundary
...
--legacyalign, --no_legacyalign are deprecated from ARMC6 compiler, in order to
remove deprecated flags all linker files (GCC and IAR as well to have uniformity)
should strictly align to 8-byte boundary
2018-10-09 10:15:07 -05:00
e1ecce85ba
Nuvoton: Fix alignment of execute region to 8-byte boundary
...
--legacyalign, --no_legacyalign are deprecated from ARMC6 compiler, in order to
remove deprecated flags all linker files (GCC and IAR as well to have uniformity)
should strictly align to 8-byte boundary
2018-10-09 10:15:07 -05:00
52dc2e58ff
Added more boards with QSPI component default
2018-10-09 15:37:31 +03:00
a60552c07d
Return to 1-1-1 mode prior to setting QUAD enable
2018-10-09 15:17:52 +03:00
008fa6e87f
K66F has an SD Card on board. Configure it as the default block device storage.
2018-10-08 22:46:29 -05:00
f24ac501a8
Set main thread stack size as 3K for constrained targets
2018-10-08 13:27:35 -05:00
b7cf1abf81
Merge pull request #8039 from c1728p9/stack_size_framework
...
Add framework for configuring boot stack size
2018-10-08 10:26:16 -05:00
9472814583
Merge pull request #8325 from ganesh-ramachandran/m3h6_pinmap_usticker-free
...
Fix for pinmap & usticker free() in TMPM3H6
2018-10-08 10:25:07 -05:00
8fd99449c3
Merge pull request #8280 from bcostm/fix_i2c_stop
...
STM32: Fix I2C stop condition
2018-10-08 10:23:38 -05:00
8aa65faf6a
Merge pull request #8239 from ganesh-ramachandran/m46b_pwmout_serial-fuart
...
Fix for pwmout & serial fuart in TMPM46B
2018-10-08 10:16:07 -05:00
b81c8a99d7
Merge pull request #8193 from OpenNuvoton/nuvoton_m2351_license
...
M2351: Add license file for default secure library/executable
2018-10-08 10:14:05 -05:00
5a1c49fa6d
Merge pull request #8168 from jeromecoutant/PR_ADC_DISCOL496
...
DISCO_L496AG : enable ADC
2018-10-08 10:10:44 -05:00
866018b22d
Merge pull request #8149 from ganesh-ramachandran/m066_usticker-new_feature
...
Add usticker feature to TMPM066
2018-10-08 10:09:33 -05:00
f5cfdfafb3
Merge pull request #8072 from TomoYamanaka/improve_flashiap
...
Renesas : Improve Flash iap driver
2018-10-08 10:08:47 -05:00
2b3f5bd486
Merge pull request #8061 from naveenkaje/push_uart_flow_control_fix
...
NRF52: Ensure that we configure hardware after flow control changes
2018-10-08 10:08:03 -05:00
ebb0d02fad
Merge pull request #7861 from ashok-rao/BL652_FlowControl_fix
...
Removing default flow control for MTB_LAIRD_BL652
2018-10-08 10:05:13 -05:00
c8734cf62a
Merge pull request #8252 from juhoeskeli/stm32f207_IAR
...
Adjust heap size on stm32f207
2018-10-08 12:36:53 +01:00
365d61e4a9
Merge pull request #7304 from cedrickkukela-cd/MTS_DRAGONFLY_L471QG_pull_request_feature_changes
...
Add MTS dragonfly, MTS dragonfly l471
2018-10-08 11:06:23 +02:00
3df898daae
Merge pull request #8266 from M-ichae-l/realtek-rtl8195am-Add-MCU_target-updates
...
Realtek-rtl8195am: Add MCU_ target
2018-10-06 07:54:17 +02:00
4fbd39c74e
Merge pull request #8108 from c1728p9/systick_rename
...
Rename device option STCLK_OFF_DURING_SLEEP
2018-10-06 07:46:49 +02:00
baada0e783
Merge pull request #8242 from jeromecoutant/PR_STM32_LPTICKER
...
STM32 LPTICKER : Fix tickless and LPTICKER_DELAY_TICKS
2018-10-05 22:23:09 +02:00
0b1bc876ac
Merge pull request #8103 from jeromecoutant/PR_L0_ADC
...
STM32 L0 ADC internal channel fix
2018-10-05 22:22:32 +02:00
72fa1e0e8f
Merge pull request #8119 from jeromecoutant/PR_L4_ADC
...
STM32L496 : wrong ADC init
2018-10-05 19:53:25 +02:00
f549f14a0a
Set ISR stack and heap sizes for low end devices
...
Set the ISR stack to be 1KB. https://github.com/ARMmbed/mbed-os/pull/7238
Set the heap size to 3KB(2KB + overhead + spare) so that atleast 2KB free ram is
available for testing.
With dynamic heap size, explicit size is not required. IAR 7.8 supports
static heap, hence the change is needed in IAR linker files.
2018-10-05 12:09:46 -05:00
f7f6d4d2d8
Merge pull request #7585 from bcostm/dev_NUCLEO_L4R5ZI
...
NUCLEO_L4R5ZI: add new platform
2018-10-05 14:53:11 +02:00
cd996cd4c8
Copy edit REAMDE.md
...
Copy edit file, mostly for active voice and consistent spelling.
2018-10-04 16:55:36 -05:00
83caa049ca
STM32 RTC : write RTC time while LPTICKER is enabled
...
This fix avoid a long waiting loop in rtc_write function,
which was not acceptable in TICKLESS context.
Implementation comments added.
Global variable name has been updated for easier maintenance:
- LPTICKER_counter is the U32 continuous tick counter
- LPTICKER_RTC_time is the RTC time used to get the time difference
between rtc_read_lp() calls
2018-10-04 15:30:49 +02:00
7a057d7ec8
Merge pull request #8085 from jeromecoutant/PR_RTC_LSI
...
STM32 RTC : start LSI clock (for targets without LSE)
2018-10-04 13:37:53 +02:00
7dba836719
Fix for pinmap & usticker free() to TMPM3H6
...
Implemented usticker free()
Fix pinmap data overwriting to same port pins
2018-10-04 16:44:55 +05:30
8822774fbf
MCUXpresso: Add Flash support for KL43Z, KL82Z, KW41Z, K22F
...
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2018-10-02 20:09:23 -05:00
72abe51713
NRF52: setup the UART_RTS pin during startup to enable console RX
...
While investigating the RX issue on NRF52_DK after SDK 14 updates,
it is observed that the RX FIFO doesn't get filled up, when the
flow control is disabled. Hence the readable never returns true.
If using Serial interface, the stdio file handles (0, 1, 2) get opened.
This results in configuring the flow control for STDIO, and it is observed
that the RX FIFO gets filled.
However, if RawSerial is used, the STDIO file handles
don't get opened. During the debug process it was observed that if the
flow control is configured once and then set to disabled, RX worked
as expected.
Alternative to this approach is that user application specifically
enables flow control as done in mbed's Greentea test suite. See https://goo.gl/r8nBYH
See https://goo.gl/8VB2qg step 14 for _initio's description.
See test code to reproduce the issue and test fix here: https://goo.gl/AQU1xG
Description
The change in behavior with NRF52's UART RX is documented here. #6891
This change is a fix for the above issue.
2018-10-02 14:13:03 -05:00
8b623156e5
Merge pull request #7932 from wajahat-ublox/PC2_AnalogIn
...
ublox c030: Add PC2 pin to ADC pin map
2018-10-02 21:12:31 +02:00
9f9a85830f
Configure IAR stack size to 1KB
2018-10-02 13:34:16 -05:00
ef03dbd79d
Removing GCC_CR from target supported_toolchains
2018-10-02 10:44:56 -05:00
f7a030ef7c
Remove redundant error flag clearing operation
2018-10-02 09:18:03 +03:00
232543ac4b
Merge pull request #7813 from MSiglreithmaierRB/os_sleep_stm32l4
...
STM32L4: Fix sleep implementation
2018-10-01 17:24:12 +02:00
6ec90d1224
Merge pull request #8134 from jeromecoutant/PR_L1_ADC
...
STM32L1 ADC update for internal channels
2018-10-01 11:48:44 +02:00
59ce41f255
Merge pull request #8049 from OpenNuvoton/nuvoton_fix_hal_sleep
...
Nuvoton: Fix mbed_hal-sleep test failed
2018-10-01 11:48:25 +02:00
3b17888fe0
Merge pull request #8048 from naveenkaje/upstream_based_uart_fix_for_assert_test
...
NRF52: serial_api: Use polling for putc
2018-10-01 11:47:31 +02:00
c48c2ec89f
Merge pull request #7998 from NXPmicro/MIMXRT1050_Add_RTC
...
MIMXRT1050_EVK: Add RTC support
2018-10-01 11:47:10 +02:00
0ded1fa0d7
Merge pull request #7957 from andrewleech/nrf_override_ram_linker
...
nRF5x: pass ram linker start/length from config system
2018-10-01 11:45:55 +02:00
b1011bf12e
Merge pull request #7896 from alrodlim/master
...
Fix pin names of MIMXRT1050 I2C pins
2018-10-01 11:43:43 +02:00
cb087ed63a
Revise the value of return value of flash_get_page_size()
...
Currently the return value of flash_get_page_size() is 1 since the min size per one writing is 1 byte by Flash spec.
However, I noticed that this value causes a enormous write time When writing large data such as FW update.
So I revised this value to 8 byte by considering the writing time, memory alignment and memory hole.
2018-09-29 05:22:37 +09:00
9cade872db
STM32: Fix I2C stop condition
...
Need to ensure the transmission has been started before sending a STOP condition.
Issue found on the NUCLEO_H743ZI due certainly to the high-speed clock used.
But this is normally needed also on all STM32 devices using the I2C peripheral version 2.
2018-09-28 14:49:17 +02:00
96ce8ae6e3
[M2351] Add README.md for secure library/executable
2018-09-28 11:48:10 +08:00
744f150402
[M2351] Add license file for secure library/executable
2018-09-28 11:47:50 +08:00
af4841df0d
STM32 LPTICKER : set default LPTICKER_DELAY_TICKS to 1
...
For both implementation, RTC and LPTIM, there is some delay in the
set_interrupt function due to HW constraints.
Value has been set to 4 for STM32L0,
because SystemClock is slower than other families.
2018-09-27 14:42:56 +02:00
9bc2e5a5ad
STM32 LPTICKER with RTC : Fix tickless and lp wrapper
...
When both tickless and LPTICKER_DELAY_TICKS are enabled some ST
devices randomly get stuck sleeping forever. This is because the
wake up time passed to the rtc is ignored if the previous match is
about to occur. This causes the device to get stuck in sleep.
This patch prevents matches from getting dropped by the rtc by
deactivating the rtc wake up timer before setting a new value.
Events leading up to this failure for the RTC:
-1st call to lp_ticker_set_interrupt
-delay until ticker interrupt is about to fire
-2nd call to lp_ticker_set_interrupt
-interrupt for 1st call fires and match time for 2nd call is dropped
-LowPowerTickerWrapper gets ticker interrupt but treats it as a
spurious interrupt and drops it since it comes in too early
-device enters sleep without a wakeup source and locks up
2018-09-27 14:31:36 +02:00
b1d23e5ec5
STM32 LPTICKER with LPTIM : Fix tickless and lp wrapper
...
This fixes issue with mbed_hal/lp_ticker/lp_ticker_early_match_race_test
2018-09-27 14:30:00 +02:00
c68e7c61ed
Check LPUART clock source in STOP mode
...
Check LPUART clock source before enable it in STOP mode, only LSE could be enabled in STOP mode.
2018-09-27 19:12:42 +08:00
909ce3590a
NUCLEO_L4R5ZI: set IAR linker stack size to 1KB
2018-09-27 12:03:08 +02:00
5b4ff94bff
NUCLEO_L4R5ZI: change _ALTx pins
2018-09-27 12:03:07 +02:00
ee5aff7e18
NUCLEO_L4R5ZI: remove PWM_5 pins as already used by us_ticker
2018-09-27 12:03:07 +02:00
a644ddd2e7
NUCLEO_L4R5ZI: enable bootloader
2018-09-27 12:03:07 +02:00
3a722358b1
NUCLEO_L4R5ZI: add missing timer freeze macro
2018-09-27 12:03:07 +02:00
dc5746e3ec
NUCLEO_L4R5ZI: update targets.json
2018-09-27 12:03:07 +02:00
abca890d8e
NUCLEO_L4R5ZI: update mbed_rtx.h
2018-09-27 12:03:07 +02:00
ef33ff5524
NUCLEO_L4R5ZI: add all board files
2018-09-27 12:03:07 +02:00
9d5ebf778c
Merge branch 'realtek-rtl8195am-Add-MCU_target-update' of https://github.com/M-ichae-l/mbed-os into realtek-rtl8195am-Add-MCU_target-update
...
1, edit "targets.json" to let "REALTEK_RTL8195AM" target inherit from "MCU_RTL8195A"
2, change file structures for folder "Target_Realtek"
3, add "PeripheralPins.h" and "PeripheralPins.c"
2018-09-27 17:45:10 +08:00
7d89a02e48
Remove LOWPOWERTIMER as it has been replaced by LPTICKER
2018-09-26 15:39:43 -05:00
a80b2369c3
Decrease heap size in IAR linker so tests compile and use SRAM2 for IAR and GCC
2018-09-26 15:39:42 -05:00
5ff0eb9d92
Rebase and changes for Dragonfly nano support
2018-09-26 15:39:42 -05:00
31d04b05b7
Rebased on master mbed-os 9/7/18
...
This required replacing hal_tick.h with us_ticker_data.h
2018-09-26 15:37:33 -05:00
3bb8543e5b
Remove commented out code
2018-09-26 15:37:33 -05:00
55bcf93574
Fixed spacing/tabs and clean up targets.json
2018-09-26 15:37:33 -05:00
fad95e9a7d
Fix rev D radio init/power/reset and add back bootloader capability
2018-09-26 15:37:33 -05:00
2886ea0ad8
target changes
2018-09-26 15:37:33 -05:00
463182d372
REV D change for modem on
2018-09-26 15:37:33 -05:00
1064994095
Rev c pin name fix
2018-09-26 15:37:33 -05:00
7f29f837d1
remove blanks
2018-09-26 15:37:33 -05:00
56fa71cbd3
delete file
2018-09-26 15:37:33 -05:00
50254bcc61
change startup and s file names to match target
2018-09-26 15:37:33 -05:00
5e1bb381cd
fixing onboard modem init bug on mts dragonfly l471
2018-09-26 15:37:32 -05:00
28f6b5787a
target fix
2018-09-26 15:37:32 -05:00
e2e5d9ed43
Ublox and PinName fixes
2018-09-26 15:37:32 -05:00
c18eef804e
adding TARGET MTS_DRAGONFLY_L471QG
2018-09-26 15:37:32 -05:00
3a6b52fd15
Clear error programming flags before erase & program operations
2018-09-26 22:58:49 +03:00
b3fe04f68a
Merge pull request #8099 from NXPmicro/Fix_MXRT_PWM
...
MIMXRT1050_EVK: Fix the PWM Hal driver
2018-09-26 11:38:56 -05:00
eaa5102358
Merge pull request #8014 from M-ichae-l/realtek-rtl8195am-lib-updates
...
realtek rtl8195am lib updates
2018-09-26 13:09:28 +02:00
f8c8c3cf68
Reduce heap size on stm32f207
2018-09-26 10:07:45 +03:00
ea6c886d22
STM32L4: Use HAL layer functions for sleep implementation
2018-09-26 08:54:13 +02:00
815683c2bd
Merge pull request #7941 from OpenNuvoton/nuvoton_fix_gpio_mode_mapping
...
Nuvoton: Fix GPIO mode mapping
2018-09-25 13:15:09 -05:00
e8d32ca0f9
STM32F1 RTC : save values in register
...
Date is managed only by SW
within CUBE functions HAL_RTC_GetDate and HAL_RTC_SetDate.
They are then replaced by functions that saved counters in HW registers.
RTC_ReadTimeCounter and RTC_WriteTimeCounter are then added to the ST API.
2018-09-25 13:45:59 +02:00
65a0a1aecd
Merge pull request #8131 from jeromecoutant/PR_F3_ADC
...
STM32F3 correct analogin_read
2018-09-25 13:24:03 +02:00
396f7e39fa
Merge pull request #8037 from mattbrown015/stm32_gpio_irq_shared_vector
...
STM32: Fix disabling of IRQs shared by multiple events
2018-09-25 13:18:02 +02:00
9215b9d264
Fixed pwmout & serial fuart
...
pwmout:
Used SystemCoreClock
Serial fuart:
SERIAL_5 & SERIAL_3 have same CTS pin (PA7), only function register is different (4 & 2).
pinmap_peripheral() will always return first match from the map.
Hence changed as, if SERIAL_5 is used, then pinmap_peripheral() should return SERIAL_5 (function register 2 to be set).
2018-09-25 13:29:12 +05:30
9474603791
Added usticker feature
2018-09-25 12:51:08 +05:30
b01cdcba5a
Modify typo of return value at mbed_get_a9_tick_irqn().
2018-09-25 14:07:59 +09:00
48038e4dcc
Change MTU2 channel number for LPTicker of GR-LYCHEE
...
MTU2(Multi function Timer pulse Unit 2) can create the low freaquency.
Currently GR-LYCHEE uses MTU2 channel 3 for LPTicker, but I noticed that a part of it is used by another function.
Thus, I changed MTU2 channel number for LPTicker to 2.
2018-09-25 13:53:49 +09:00
7ca85f9688
Merge pull request #8009 from NXPmicro/LPC1768_RTC
...
LPC1768: Enable RTC
2018-09-24 10:44:29 -05:00
7d9263d2ef
Move I2C pins definition so that A4 and A5 are defined before using them
2018-09-24 09:46:11 -05:00
d0ac092e68
Adjust stack & heap for IAR on STM32F412xG
2018-09-24 11:27:42 +03:00
b5ee0c0e27
Merge pull request #8026 from SiliconLabs/bugfix/gpcrc
...
Fix for HW CRC calculations on Silicon Labs targets
2018-09-24 10:22:13 +02:00
9d78650fcc
Merge pull request #7989 from OpenNuvoton/nuvoton_fix_m2351_stdiouart
...
M2351: Fix STDIO_UART error
2018-09-24 09:06:52 +02:00
0f879adccd
Apply @kjbracey-arm's comments
2018-09-22 20:40:32 +02:00
5eb314f65f
Merge pull request #8164 from OpenNuvoton/nuvoton_iot_m487
...
Support Nuvoton's new target NUMAKER_IOT_M487
2018-09-21 21:31:22 -05:00
caa4279244
Merge pull request #8023 from SiliconLabs/hotfix/nanostack-default-interface
...
Hotfix for PR #7778 on Silicon Labs targets
2018-09-21 12:50:43 -05:00
ab882c3416
Merge pull request #8030 from OpenNuvoton/nuvoton_fix_common_tickers_fail
...
Nuvoton: Fix Greentea test common_tickers failed
2018-09-21 14:55:28 +02:00
54afd1cd92
Merge pull request #8187 from bcostm/fix_serial_lse
...
STM32: fix wrong LSE config in serial_baud function
2018-09-21 12:54:01 +02:00
6a34251b07
Merge pull request #7925 from maciejbocianski/qspi_hal_test_refactoring
...
Qspi hal test refactoring/update
2018-09-21 09:40:10 +02:00
7d54df66b1
Merge pull request #7993 from evva-sfw/hotfix/efm32_hal_pwmout_set_period_fix
...
Fix EFM32 pwmout hal function pwmout_period
2018-09-20 13:42:04 -05:00
9f3437aaec
Merge pull request #7987 from OpenNuvoton/nuvoton_m2351_v1.3
...
M2351: Update to NuMaker-PFM-M2351 V1.3 board
2018-09-20 13:41:03 -05:00
b71f3409d7
Merge pull request #7921 from Wiznet/master
...
Fix Bug : IAR heap memory problem
2018-09-20 14:58:15 +02:00
d5ef4672b1
Support large Flash in Flash iap driver of Renesas
...
I addressed the cases Flash size is larger than 0x1000000.
2018-09-20 10:14:15 +09:00
d295eba9e5
Improve Flash iap driver of Renesas
...
I changed _page_program() func because "buf" which is an argument of data_send() for writing must be a RAM address in order to operate in SPI mode.
(ex: if it is ROM table data, writing will be failure.)
Also, I changed the period of interrupt disable/enable at _page_program() func and _sector_erase() func because lock period is too long.
2018-09-20 10:08:20 +09:00
4c31be2db4
STM32: fix wrong LSE config in serial_baud function
2018-09-19 16:46:54 +02:00
c673d5344c
NXP: Fix alignment of execute region to 8-byte boundary
...
--legacyalign, --no_legacyalign are deprecated from ARMC6 compiler, in order to
remove deprecated flags all linker files (GCC and IAR as well to have uniformity)
should strictly align to 8-byte boundary
2018-09-19 09:45:46 -05:00
525545c7b0
Freescale: Fix alignment of execute region to 8-byte boundary
...
--legacyalign, --no_legacyalign are deprecated from ARMC6 compiler, in order to
remove deprecated flags all linker files (GCC and IAR as well to have uniformity)
should strictly align to 8-byte boundary
2018-09-19 09:35:59 -05:00
c4e0fc6d11
Merge pull request #7920 from li-ho/aducm3029_sys_return_code
...
Resolve duplicate ADuCM3029 system return code
2018-09-19 14:19:25 +02:00
81d0948c09
Merge pull request #8025 from deepikabhavnani/flag_update
...
Align to CMSIS defines for Non-Secure
2018-09-19 14:18:41 +02:00
9a0fc98bdc
Hotfix for PR #7778
...
TB_SENSE_12 would have been left behind by the changes in #7778 . This commit implements the changes in mbed to allow targets to provide a default network interface for Silicon Labs targets.
2018-09-19 12:30:21 +02:00
6d5cb6c69b
Merge pull request #8136 from fkjagodzinski/fix-stm-us_ticker_after_deepsleep
...
STM: Fix us_ticker timestamp after deep sleep
2018-09-19 12:15:10 +02:00
a0d7d4eef7
nrf: allow target.mbed_ram_start and target.mbed_ram_size to override settings in linker
2018-09-19 16:13:36 +10:00
cd618e640b
Implemented us_ticker free()
2018-09-19 10:41:07 +05:30
7504050bb3
Added usticker feature
...
To enable the feature US_TICKER, file is newly implemented with Timer B, which has proper clock prescale and free running after match interrupt.
Old us_ticker driver file (Timer A) is producing up to 100us tolerance, which causes to fail US_TICKER feature.
Hence, changed the peripheral ticker A to B.
2018-09-19 10:37:23 +05:30
9d2fcdb773
[M487] Create MCU_M480 for inheritance by M487 targets
...
In targets.json, create MCU_M480 for inheritance by NUMAKER_PFM_M487/NUMAKER_IOT_M487.
2018-09-19 09:02:42 +08:00
5391a7b6fe
Merge pull request #7700 from cesarvandevelde/bluepill-target-fix
...
STM32: Correct device_has_add flags for bluepill_f103c8 target, fixes #7654
2018-09-18 11:30:35 -05:00
f510efff38
DISCO_L496AG : enable ADC
...
See User Manual, VREF+ is not connected by default
NB: Use 2.5V as reference (instead of 3.3V)
for internal channels calculation
2018-09-18 16:11:13 +02:00
7bcb066917
Merge pull request #7856 from fredlee12001/master
...
Realtek: fix gpio is connected
2018-09-18 12:28:14 +02:00
8604f80a8e
Merge pull request #8010 from NXPmicro/NXP_Fix_UART_Parity_Sel
...
NXP: Update serial driver's parity handling
2018-09-17 14:46:58 +02:00
b97ac0c353
Merge pull request #7787 from jeromecoutant/PR_MSI_LSE
...
STM32L4 : code cleanup in MSI SetSysClock
2018-09-17 14:22:29 +02:00
6821556b47
STM: Fix us_ticker timestamp after deep sleep
...
Use the `mbed_sdk_inited` flag to correct the `HAL_GetTick()` behavior
after waking up from deep sleep mode. `ticker_read_us()` must not be
used to read us_ticker timestamp after waking up until the us_ticker
context is restored. More detailed description in issue #8117 .
Fixes #8117
2018-09-14 15:44:40 +02:00
f41c72ded8
STM32L1 ADC update for internal channels
2018-09-14 13:23:50 +02:00
52776a1e7b
SM32F3 correct analogin_read
2018-09-14 11:41:12 +02:00
e5000abd93
Merge pull request #1 from thesupershan/lpc1768-us-ticker
...
choose which lpc1768 timer to use for us_ticker.c
2018-09-13 11:56:58 -07:00
2a70879ffa
STM32L496 : wrong ADC init
2018-09-13 16:31:49 +02:00
190803ae6a
choose which lpc1768 timer to use for us_ticker.c
2018-09-13 05:57:13 -07:00
ab50681c33
Rename device option STCLK_OFF_DURING_SLEEP
...
Rename STCLK_OFF_DURING_SLEEP to SYSTICK_CLK_OFF_DURING_SLEEP to avoid
confusion with the STmicroelectronics.
2018-09-12 14:40:25 -05:00
12522210a2
STM32L0 internal channel ADC_TEMP
...
Temperature measurement was not stable
2018-09-12 17:21:36 +02:00
5bbe62889a
STM32L072 : ADC internal channels correction
2018-09-12 17:21:30 +02:00
8d9e2e5d0a
Merge pull request #7909 from KariHaapalehto/f411re_iar
...
Adjust STMF411xE IAR linker file to mbed-os memory needs.
2018-09-12 09:20:15 -05:00
3661dc7e71
MIMXRT1050_EVK: Fix the PWM Hal driver
...
1. Add Pin defines for missing PWM pins
2. Update the hal to account for the number of PWM instances
3. Fix the register reload policy
4. Configure the XBAR to put the PWM fault inputs in inactive state
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2018-09-12 08:52:39 -05:00
827c8bd486
STM32 RTC : remove not necessary macro
...
__HAL_RCC_RTC_CLKPRESCALER is called in __HAL_RCC_RTC_CONFIG
2018-09-11 14:14:19 +02:00
5c46bec4d4
STM32 RTC with LSI : stop reset registers during init
2018-09-11 14:13:43 +02:00
0fecc56e84
STM32 RTC : Start LSI clock asap
2018-09-11 14:04:03 +02:00
9e175db443
NRF52: Ensure that we configure hardware after flow control changes
...
Call the routines to program the hardware to reflect the updates made to
flow control so that the object and hardware are in synch.
2018-09-10 10:47:28 -05:00
ff80e298d2
Align to CMSIS defines for Non-secure
...
CMSIS updated the __DOMAIN_NS define to DOMAIN_NS. Update the define
in existing code for non-secure part.
2018-09-10 09:25:27 -05:00
6ac163088a
Support Nuvoton's NuMaker-IoT-M487 board
2018-09-10 11:32:54 +08:00
a65e3d42e5
[M2351] Update secure library/executable
...
1. Remove hal_sleep/hal_deepsleep from secure library
2. Add CLK_Idle_S/CLK_PowerDown_S
2018-09-10 11:09:40 +08:00
0550de72f5
[M2351] Fix hal_deepsleep with serial_can_deep_sleep
...
Add secure functions CLK_PowerDown_S/CLK_Idle_S
2018-09-10 10:55:45 +08:00
beb04a82dc
[Nuvoton] Fix serial corruption due to deep sleep
...
Prevent deep sleep when there is still any character being transmitted on the UART.
This allows tickless to be safely enabled.
2018-09-10 10:55:44 +08:00
310b12a235
[Nuvoton] Fix HAL sleep test failure with lp_ticker
...
Replace wait_us with nu_busy_wait_us in lp_ticker since wait_us is not allowed in sleep test
which would suspend us ticker layer on which wait_us relies. nu_busy_wait_us is implemented
by calling us ticker HAL API directly rather than relying on us ticker layer.
2018-09-10 10:55:44 +08:00
26c0444cc3
[Nuvoton] Add nu_delay_cycle_x4
...
nu_delay_cycle_x4 is a replacement for wait_us when us ticker is not available.
2018-09-10 10:55:43 +08:00
88b9f20ec4
[Nuvoton] Add nu_busy_wait_us
...
nu_busy_wait_us is a replacement for wait_us when intermediary us ticker layer is disabled.
2018-09-10 10:55:43 +08:00
2b632b9eb0
[Nuvoton] Move nu_countdown_init/expired/free implementations to nu_timer.c from nu_timer.h
2018-09-10 10:55:42 +08:00
ab7b93ca58
[Nuvoton] Synchronize us_ticker to lp_ticker
...
This is to make implementations of us_ticker/lp_ticker consistent.
2018-09-10 10:50:22 +08:00
6639a92bcd
[Nuvoton] Fix lp_ticker_free cannot pass speed test
2018-09-10 10:50:22 +08:00
9ee83f575a
[Nuvoton] Fix spurious us_ticker/lp_ticker interrupts
...
If us_ticker/lp_ticker is scheduled and then the interrupt is disabled, the originally scheduled
interrupt may still become pending. If this occurs, then an interrupt will fire twice on the next
call to us_ticker_set_interrupt/lp_ticker_set_interrupt - once immediately and then a second time
at the appropriate time.
This patch prevents the first interrupt by clearing interrupts in
us_ticker_set_interrupt/lp_ticker_set_interrupt before calling NVIC_EnableIRQ.
2018-09-10 10:50:21 +08:00
28c63ec0f3
NRF52: serial_api: Use polling for putc
...
There are scenarios where putc is called within a critical section, e.g
to log ASSERTs in early initialization code. The interrupts being
disabled here prevents the handlers for the UARTE from executing.
This breaks the tx_in_progress flag based approach. The tx_in_progress
never gets reset. Poll on the TXDRDY instead.
It can be recreated with a simple program as shown here:
*************** Current Behavior ****************
++ MbedOS Error Info ++
Error Status: 0x80FF0100 Code: 256 Module: 255
Error Message: F
************** With Fix *************************
++ MbedOS Error Info ++
Error Status: 0x80FF0100 Code: 256 Module: 255
Error Message: Fatal Run-time error
Location: 0x2C0A9
Error Value: 0x0
Current Thread: Id: 0x20005520 Entry: 0x30EBF StackSize: 0x1000 StackMem: 0x20004520 SP: 0x20005490
For more info, visit: https://armmbed.github.io/mbedos-error/?error=0x80FF0100
-- MbedOS Error Info --
nrf failure at .\main.cpp:22
***************************************************
2018-09-09 16:33:30 -05:00
d311a96061
Merge pull request #7950 from c1728p9/l4_malloc_fix
...
Fix memory allocation on STM32L4 devices
2018-09-07 22:50:05 -05:00
76827c3704
Merge pull request #7971 from JammuKekkonen/fix_softdevice_memory_reservation_for_nrf52dk
...
Fix memory reservation for Softdevice in NRF52_DK
2018-09-07 11:46:58 -05:00
66cce67d38
Update the K64F to use boot stack size config
...
Update the K64F linker scripts to make use of the newly added stack
size target config.
2018-09-07 17:00:48 +01:00
1ead033423
Add framework for configuring boot stack size
...
Add the target config option "boot-stack-size" which is passed to the
linker as the define "MBED_BOOT_STACK_SIZE" so the linker can
adjust the stack accordingly. On mbed 2 the boot stack becomes the
main stack after boot. On mbed 5 the boot stack becomes the
ISR stack after boot. Because of these different uses the stack size
for mbed 2 is set to 4K by default while on mbed 5 it is set to 1k.
Additionally, the NRF5X family requires a larger interrupt stack size
due to the softdevice so the size is increased to 2k on mbed 5 builds.
2018-09-07 16:31:49 +01:00
792cec773e
STM32: Disabling of IRQs shared by multiple events
...
Discern if an IRQ is being shared by multiple events and only disable the IRQ if no events are using it.
2018-09-07 14:48:02 +01:00
e30435bd08
Merge pull request #7990 from maciejbocianski/qspi_small_fixes
...
DISCO_L475VG_IOT01A remove old QSPI pins
2018-09-07 10:47:19 +02:00
7711d4c93b
Word-sized input to GPCRC is only valid for 32-bit polynomial
2018-09-07 00:19:32 +02:00
ff1a0ede1f
Merge pull request #7995 from yossi2le/revert-pinnames-files
...
Reverting PinNames.h after PR #7774 changes
2018-09-06 13:20:43 -05:00
e084865e8e
Fix comparison warning on STM32L4 devices
...
Cast the pointer used in l4_retarget to uint32_t before comparing it
to fix the warning:
"comparison between pointer and integer"
2018-09-06 16:07:03 +01:00
80c9814fd0
Revert file permissions
2018-09-06 13:57:06 +02:00
b2d8b54f7d
Revert file permissions
2018-09-06 12:56:13 +02:00
86f966fa00
Adjust STMF411xE IAR linker file to mbed-os memory needs.
...
Stack size decreased and heap size increased.
2018-09-06 13:34:12 +03:00
ff20fc3341
"gpio_api.c" update
...
1, "gpio_api.c" update. fix issues for compiling the mbed-cloud-client-example
2018-09-06 14:40:06 +08:00
b06553fa25
rtl8195am lib updates
...
1, rtl8195am lib updates. Preparation for the low power features.
2018-09-06 14:28:34 +08:00
201ec14d45
Merge pull request #7779 from MateuszMaz/fix_for_NRF52_pwm_issues
...
Fix for nrf52 pwm issues
2018-09-05 20:05:35 -05:00
16ff8e7369
NXP: Update serial driver's parity handling
...
This is a fix for issue 6305. This fix set the default
parity value to NONE.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2018-09-05 13:30:36 -05:00
e09f1e2149
LPC1768: Enable RTC
...
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2018-09-05 12:21:03 -05:00
dc45990a58
Merge pull request #7904 from NXPmicro/MIMXRT1050_Fix_Spi
...
MIMXRT1050_EVK: Update SPI HAL driver
2018-09-05 09:18:58 -05:00
a8fca70fa9
MIMXRT1050_EVK: Add RTC support
...
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2018-09-05 08:29:37 -05:00
acfda5895e
Changes in PR #7774 of PinNames.h should be reverted. This commit reverts those files excpet for K82F and K64F which are left as an example
2018-09-05 14:13:05 +03:00
dd2e93fbd3
Fix EFM32 pwmout hal function pwmout_period
...
In pwmout_period() is a check for changed values, which is not working because of a wrongly used bitmask. This is fixed now.
2018-09-05 11:17:28 +02:00
050604f1b8
DISCO_L475VG_IOT01A remove old QSPI pins
2018-09-05 09:58:20 +02:00
2da75c860c
[M2351] Fix STDIO_UART error
2018-09-05 11:52:40 +08:00
958c7fe564
[M2351] Update to NuMaker-PFM-M2351 V1.3 board
...
1. Update UNO pin A4/A5
2. Update UNO pin D2/D3
2018-09-04 15:19:33 +08:00
44925d8527
Merge pull request #7579 from u-blox/ublox_odin_driver_os_5_v3.0.0_rc1
...
Updated ODIN drivers to v3.0.0 RC1
2018-09-03 09:25:32 +02:00
4c105fc2d7
SDT64B is not Arduino FF. It does not define Arduino pins.
2018-09-01 12:40:38 -05:00
3ab9c41983
WISE-1510 is not Arduino form factor
2018-09-01 12:37:46 -05:00
710d1bb00a
Enable default Mesh interface on KW24D
...
This device still requires MCR20A driver to be in build tree
and this patch https://github.com/ARMmbed/mcr20a-rf-driver/pull/18
2018-09-01 12:36:27 -05:00
993c897b55
Merge pull request #7774 from yossi2le/sd-spif-to-mbed-os
...
Add default block device support (SD, SPIF and FLASHIAP)
2018-09-01 11:15:13 -05:00
e2d003a420
Fix memory allocation on STM32L4 devices
...
Depending on initial size allocated on STM32L4 devices with
TWO_RAM_REGIONS set a crash may occur. This is because there is a
mismatch between the size newlib is expecting and the size actually
returned by _sbrk. This is because the STM32L4 implementation of _sbrk
is performing alignment internally.
This patch fixes this problem by removing the code in __wrap__sbrk
which performs the alignment.
2018-08-31 18:31:52 -05:00
00b7700be2
Merge pull request #7875 from c1728p9/feature_CMSIS_5_0b521765
...
Update CMSIS to 5.4.0
2018-08-31 11:31:37 -05:00
f91bba9803
Updated pinmap to fix CAN and enable UART hardware flow control
2018-08-31 17:17:29 +02:00
c10907288d
Corrected device_has_add flags for bluepill_f103c8 target
2018-08-31 17:17:29 +02:00
1a9999708e
Fix memory reservation for Softdevice in NRF52_DK
2018-08-31 14:13:55 +03:00
3a64383de5
fix qspi address sending for nrf52
...
fix address sending in qspi_command_transfer
now address is send MSB first
2018-08-31 10:48:37 +02:00
b934632653
Access Point API
2018-08-31 11:33:30 +05:00
55328ebdd5
[Nuvoton] Fix pin mode mapping between input pull mode/direction and I/O mode
...
1. Modify PinMode enum to fully support GPIO I/O modes.
2. Translate input pull mode/direction to I/O mode, where H/W doesn't support
separate configuration for input pull mode/direction.
3. Allow for configuring I/O mode in addition to input pull mode.
2018-08-31 10:06:30 +08:00
06a98e7dcf
Merge pull request #7778 from SeppoTakalo/provide_default_mesh
...
Fix MeshInterface::get_default_instance()
2018-08-30 16:11:00 -05:00
a93ff7c931
Added PC2 pin to ADC pin map
2018-08-30 15:19:50 +05:00
4989650854
Don't provide default interface on NCS36510, won't fit testcases on IAR
2018-08-30 11:04:25 +03:00
56117a86c8
Merge pull request #7871 from juhoeskeli/NUCLEO_F207ZG_LINKER_MCC
...
Updated linker files (GCC_ARM, ARM, IAR) for NUCLEO_F207ZG and enabled bootloader functionality
2018-08-30 09:49:17 +02:00
251ab0173d
Stack size change to 1K in IAR Linker Script.
2018-08-30 08:41:12 +09:00
ed8e170d15
Moving SD, SPIF and FLASHIAP into mbedos and refactoring features storage directory structure.
2018-08-29 12:01:11 +03:00
3f4d30de56
Fix Bug : IAR heap memory problem
2018-08-29 14:20:30 +09:00
b57f90241e
Apply consistent system return code to adi_system_EnableRetention()
2018-08-29 13:42:16 +10:00
ae492d9c4a
Add consistent ADuCM3029 System return codes and remove duplicate codes
2018-08-29 13:38:30 +10:00
16d23702bf
Merge pull request #7873 from 0xc0170/fix_realtek_ipv6
...
realtek: fix #7829 - remove dhcps files
2018-08-28 14:37:46 +02:00
9836b9bd6a
Provide default mesh driver on NCS36510
2018-08-28 11:02:58 +03:00
d5b374b327
Correct comment about stack size in IAR linker file
2018-08-28 08:44:08 +03:00
5cc06238ea
Enable bootloader for NUCLEO_F207ZG
2018-08-28 08:44:08 +03:00
22137b45dd
Update NUCLEO_F207ZG linker files
2018-08-28 08:44:08 +03:00
2bc140e978
MIMXRT1050_EVK: Update SPI HAL driver
...
Use a different SDK API to write to the SPI Bus
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2018-08-27 14:20:49 -05:00
91354184dc
Merge pull request #7825 from SiliconLabs/siliconlabs-qspi
...
Silicon Labs QSPI HAL implementation
2018-08-27 13:51:38 -05:00
90689c3191
fixed pin names of I2C pins
2018-08-27 07:29:07 -05:00
a24cecfc94
Merge pull request #7805 from jamesbeyond/fm_test
...
Skip Greentea tests for Mbed OS code coverage on Fast Models
2018-08-27 10:39:43 +02:00
ce28c91405
Merge pull request #7534 from bentcooke/mote_L152_en_os5
...
enable MOTE_L152 for OS5
2018-08-27 10:27:36 +02:00
55c6dade3d
Apply changes corresponding to #7817
...
QSPI standard pin names were changed after the QSPI feature PR.
2018-08-27 10:10:18 +02:00
e0d033bdd1
Allow unaligned input/output for QSPI
...
The code is written such that access to the data input/output happens word-by-word, and that means unaligned access is fine (though with a performance loss) on Cortex-M3/M4 devices.
2018-08-27 10:03:08 +02:00
845a5beb30
Initial commit of Silicon Labs QSPI HAL implementation
...
* For EFM32GG11, since that is the only Silicon Labs target with QSPI per today
* Verified working using the on-board flash and tests-mbed_hal-qspi
2018-08-27 10:03:08 +02:00
22ebf69dea
Revert "EFM32: Use SECURE_ACCESS to access the ROM table"
...
This reverts commit 1b0922e97b
2018-08-25 20:40:35 -05:00
4ff5ea40dd
Revert uVisor changes for K64F
...
Revert the changes made in the commit:
1c2a7d8842
2018-08-25 20:40:31 -05:00
2f8e679183
Merge pull request #7592 from orenc17/remove_uvisor
...
Remove uVisor from mbed-os
2018-08-25 19:52:24 -05:00
7531b31c01
Merge pull request #7751 from mikaleppanen/realtek_emac_interf
...
Realtek RTL8195A wifi interface to inherit EMAC interface
2018-08-24 19:30:39 -05:00
31a6fb49bd
Merge pull request #7817 from maciejbocianski/qspi_pinnames
...
standardise QSPI pin names
2018-08-24 21:12:25 +02:00
2d330533a4
Merge pull request #7652 from andrewleech/nrf5x_config_lfclk
...
NRF5x: Fix config of LFCLK source / settings.
2018-08-24 13:05:24 +02:00
5195c820e6
standardise QSPI pin names
2018-08-24 12:09:51 +02:00
812c6d5c88
Merge pull request #7783 from maciejbocianski/feature-qspi_merging
...
merge QSPI feature branch
2018-08-24 10:50:18 +02:00
ab029b5f65
realtek: fix #7829 - remove dhcps files
2018-08-23 16:48:00 +01:00
cb8d09a88a
Merge pull request #7843 from codeauroraforum/MXRT_Fix_I2C_Byte_Transfer
...
MIMXRT1050: Fix I2C Byte transfer functions
2018-08-23 10:05:08 -05:00
84eda278a5
Fix link issue for mbed-cloud-client-example with ARM toolchain.
2018-08-23 17:25:07 +08:00
32647e6888
enable MOTE_L152 for OS5
2018-08-22 11:49:25 -05:00
19a571c911
Removing default flow control for BL652
2018-08-22 16:50:22 +01:00
787317b7eb
Remove uVisor from mbed-os
2018-08-22 16:36:59 +03:00
3bf9df7b56
target DISCO_F413ZH: add QSPI flash pin names
2018-08-22 15:02:13 +02:00
6095ccf1b4
Add reset internal state before call to HAL_QspiInit function
2018-08-22 15:02:11 +02:00
7dda4e4fc6
Implement qspi_free function
2018-08-22 15:02:10 +02:00
5c26e15cd3
Fix support of max flash size
2018-08-22 15:02:09 +02:00
43258a8ff4
STM32 : add all QSPI pins in available targets
2018-08-22 15:02:08 +02:00
1534426b7e
nrf52x: fix QSPI enable flag
...
QSPI feature was mistakenly moved form target nrf52840 to nrf52832
while rebasing. This change fixes it
2018-08-22 15:02:07 +02:00
8b36d6b39a
NRF5: fix qspi R/W opcodes mapping
2018-08-22 15:02:05 +02:00
c2cc559aa7
NRF5: fix qspi custom command sending
2018-08-22 15:02:05 +02:00
67798d6eb2
STM: add qspi pin names for DISCO_L475VG_IOT01A
2018-08-22 15:02:04 +02:00
42935bbdc0
STM qspi: temporary fix for qspi_free return value
2018-08-22 15:02:03 +02:00
1f4cc95f25
fix qspi command transfer for NORDIC
...
Add address unpacking support.
Only used in erase commands
2018-08-22 15:02:03 +02:00
2f06423a89
Add support for QSPI on DISCO_L476VG
2018-08-22 15:02:01 +02:00
c00e49fcf2
Enable QSPI for DISCO_F746NG
2018-08-22 15:01:54 +02:00
293d1bda42
Add MBED_WEAK for pins
2018-08-22 15:00:22 +02:00
9b4b28fc3f
Support maximum flash size : 4Gbytes
2018-08-22 15:00:22 +02:00
50b8225948
Enable QSPI feature for DISCO_F413ZH platform
2018-08-22 15:00:21 +02:00
c57a47e4b5
Change default FlashSize to 64Mbit = 8Mbytes = 0x800000
2018-08-22 15:00:20 +02:00
8e08740237
Fix Instruction with no data command
...
Adding QSPI_DATA_NONE activates the transfer
of the command inside HAL_QSPI_COMMAND function
2018-08-22 15:00:19 +02:00
05899e9c70
Fix Address.Size and AlternateByes.Size by shifting them
...
The ST HAL code is waiting for the correctly shifted vlue
(for a direct write into the HW register)
2018-08-22 15:00:18 +02:00
d282c81e86
QSPI: add STM32L4 support
...
Disco IoT board support for QSPI. As it does not have dual flash support in QSPI,
we need to fix qspi hal implementation.
2018-08-22 15:00:17 +02:00
ae7bb17eaf
QSPI: add flash pins for nrf52480_dk board
2018-08-22 15:00:16 +02:00
0f7fd757a4
QSPI: add flash pins for F469 disco board
2018-08-22 15:00:16 +02:00
c778c90184
QSPI STM32: fix default fifo and cycle
...
As example for DISCO F469NI defines them
2018-08-22 15:00:15 +02:00
8783956a77
QSPI STM32: fix prepare comman - alt/address
2018-08-22 15:00:14 +02:00
fff20729be
QSPI STM32: fix command transfer
...
use write/read from STM32 driver
2018-08-22 15:00:14 +02:00
5038b38622
QSPI STM32: fix pin merging
...
hw name as input
2018-08-22 15:00:13 +02:00
16ca742d87
QSPI STM32: fix disabled format phase
2018-08-22 15:00:12 +02:00
2766672f64
QSPI STM32: add QSPI_x support to pinnames
2018-08-22 15:00:12 +02:00
660d250e0d
QSPI STM32: init returns error if failed to init
2018-08-22 15:00:11 +02:00
551f044e77
QSPI STM32: add qspi_command_transfer implementation
2018-08-22 15:00:11 +02:00
6e5b889e52
QSPI STM32: remove polling from write/read
...
This will be part of custom instruction transfer, the flow will be:
1. write data
2. wait for transfer to complete (poll status register from the memory device)
2018-08-22 15:00:10 +02:00
8da072d8af
QSPI STM32: set default command values to none
2018-08-22 15:00:10 +02:00
11ae100d80
QSPI STM32: fix return value in frequency
2018-08-22 15:00:09 +02:00
5e75b39b78
QSPI STM32: fix ssel af selection
2018-08-22 15:00:09 +02:00
7da0ac2516
QSPI: add STM32 implementation
2018-08-22 15:00:08 +02:00
cb4308ad64
Remove changes to Nordic SDK and modify HAL to track qspi init
2018-08-22 15:00:03 +02:00
10a6fd6549
Add support for 1_1_2 and 1_2_2 modes in HAL
2018-08-22 15:00:01 +02:00
16d121c5d2
Review fixes and doxygen changes
2018-08-22 15:00:00 +02:00
009cc8b474
Enabling QSPI headers in Nordic HAL implementation and fix for UART STDIO definitions
2018-08-22 14:59:59 +02:00
2df58e2d25
Modify QSPI HAL API to include an API for command-transfer operations
2018-08-22 14:59:59 +02:00
d1b51b6328
QSPI: initial HAL nrf52840 version
...
This commit adds QSPI HAL implementation for nrf52840 MCU targets
2018-08-22 14:59:58 +02:00
d28d13cc9b
Merge pull request #7790 from jeromecoutant/PR_LPTICKER_RTC
...
STM32 LPTICKER : RTC wake up timer is reset before setting a new one
2018-08-22 14:04:58 +02:00
629357270e
NRF5x: Fix config of LFCLK source / settings.
2018-08-22 13:55:28 +10:00
f71004cf89
MIMXRT1050: Fix I2C Byte transfer functions
...
1. Added a flag to issue START command
2. Do not send START command inside i2c_start function as
the LPI2C hardware will issue a STOP on reception
of a NACK
3. Remove the i2c_address global variable, this is not
required
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2018-08-21 10:25:00 -05:00
17a525c487
Merge pull request #7619 from u-blox/cellular_ublox_udp_tcp_imp
...
UBLOX cellular api's for UDP and TCP
2018-08-21 10:12:47 -05:00
4b5c6c8953
Merge pull request #7823 from codeauroraforum/MIMXRT1050_Fix_I2C
...
MIMXRT1050_EVK: Update the I2C driver
2018-08-21 09:54:36 -05:00
a8f390ebec
Merge pull request #7798 from simosillankorva/NUCLEO_F303RE_bootloader_support
...
Add bootloader support for target NUCLEO_F303RE
2018-08-21 09:50:26 -05:00
c167275c6d
Merge pull request #7775 from jeromecoutant/PR_ASSERT
...
STM32 wrong MBED_ASSERT use
2018-08-21 09:44:23 -05:00
c10ad7f544
Merge pull request #7212 from davidsaada/david_flashiap_test_small_flash
...
FlashIAP & NVStore tests: Skip test if overwriting code in flash
2018-08-21 09:41:51 -05:00
795248bcaf
Restore lp_ticker_free to previous implementation when running with uvisor
...
This is a temporary patch until uvisor is removed
2018-08-20 13:20:45 +03:00
64e5eb01d2
MIMXRT1050_EVK: Update the I2C driver
...
1. Remove the repeated_start flag and code as this is not needed
for the LPI2C module
2. Enable the SION bit on the I2C pins
3. Enable 22K Pullup option of the I2C pins
4. Update the 0 byte write implementation to ensure the START
command gets flushed out of the FIFO
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2018-08-17 15:03:35 -05:00
485fe79a71
add __ARM_FM macro in targets.json
2018-08-17 18:01:21 +01:00
f612ea0b47
replace hard-coded vector size with macro in linker scripts
2018-08-17 17:59:17 +01:00
f15dbf2c3d
Merge pull request #7706 from jamesbeyond/fm_mem
...
Refactoring memory regions definitions for Fast Models MPS2 targets
2018-08-17 11:10:36 -05:00
8e25d2d905
Merge pull request #7669 from SigmaDeltaTechnologiesInc/master
...
SDT64, 8195, 32620, 32625, 51822, 52832B added to targets
2018-08-17 11:10:12 -05:00
Cruz Monrreal
Deepika
Offir Kochalsky
Yossi Levy
Martin Kojtal
maclobdell
Anna Bridge
Amanda Butler
jeromecoutant
Ganesh Ramachandran
Mahesh Mahadevan
Naveen Kaje
Leon Lindenfelser
Brian Daniels
Juho Eskeli
TomoYamanaka
bcostm
ccli8
Eman869
zzw
cedrick kukela
Markus Siglreithmaier
alrodlim
Steven
Andrew Leech
Filip Jagodzinski
thesupershan
Aleshandre Diaz
Russ Butler
mattbrown015
Cesar
Kari Haapalehto
Michael Kaplan
Maciej Bocianski
Seppo Takalo
Jammu Kekkonen
Ammad Rehmat
Wajahat Abbas
justinkim
Edmund Hsu
Steven Cooreman
Fred.Li
ben
Ashok Rao
Oren Cohen
adustm
Martin Kojtal
Senthil Ramakrishnan
Qinghao Shi