ARMmbed
/
mbed-os
mirror of https://github.com/ARMmbed/mbed-os.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity

adding TARGET MTS_DRAGONFLY_L471QG

pull/7304/head
cedrick kukela 2018-06-08 07:27:33 -04:00 committed by Leon Lindenfelser
parent b3fe04f68a
commit c18eef804e
27 changed files with 23182 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

94
targets/TARGET_STM/TARGET_STM32L4/TARGET_MTS_DRAGONFLY_L471QG/PeripheralNames.h Executable file
View File

@ -0,0 +1,94 @@
/* mbed Microcontroller Library
*******************************************************************************
* Copyright (c) 2015, STMicroelectronics
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************
*/
#ifndef MBED_PERIPHERALNAMES_H
#define MBED_PERIPHERALNAMES_H
#include "cmsis.h"
#ifdef __cplusplus
extern "C" {
#endif
typedef enum {
ADC_1 = (int)ADC1_BASE,
ADC_2 = (int)ADC2_BASE,
ADC_3 = (int)ADC3_BASE
} ADCName;
typedef enum {
DAC_1 = (int)DAC_BASE
} DACName;
typedef enum {
UART_1 = (int)USART1_BASE,
UART_2 = (int)USART2_BASE,
UART_3 = (int)USART3_BASE,
UART_4 = (int)UART4_BASE,
UART_5 = (int)UART5_BASE,
LPUART_1 = (int)LPUART1_BASE
} UARTName;
#define STDIO_UART_TX PB_6
#define STDIO_UART_RX PB_7
#define STDIO_UART UART_1
typedef enum {
SPI_1 = (int)SPI1_BASE,
SPI_2 = (int)SPI2_BASE,
SPI_3 = (int)SPI3_BASE
} SPIName;
typedef enum {
I2C_1 = (int)I2C1_BASE,
I2C_2 = (int)I2C2_BASE,
I2C_3 = (int)I2C3_BASE
} I2CName;
typedef enum {
PWM_1 = (int)TIM1_BASE,
PWM_2 = (int)TIM2_BASE,
PWM_3 = (int)TIM3_BASE,
PWM_4 = (int)TIM4_BASE,
PWM_5 = (int)TIM5_BASE,
PWM_8 = (int)TIM8_BASE,
PWM_15 = (int)TIM15_BASE,
PWM_16 = (int)TIM16_BASE,
PWM_17 = (int)TIM17_BASE
} PWMName;
typedef enum {
CAN_1 = (int)CAN1_BASE
} CANName;
#ifdef __cplusplus
}
#endif
#endif

268
targets/TARGET_STM/TARGET_STM32L4/TARGET_MTS_DRAGONFLY_L471QG/PeripheralPins.c Normal file
View File

@ -0,0 +1,268 @@
/* mbed Microcontroller Library
*******************************************************************************
* Copyright (c) 2016, STMicroelectronics
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************
*/
#include "PeripheralPins.h"
#include "mbed_toolchain.h"
// =====
// Note: Commented lines are alternative possibilities which are not used per default.
// If you change them, you will have also to modify the corresponding xxx_api.c file
// for pwmout, analogin, analogout, ...
// =====
//*** ADC ***
MBED_WEAK const PinMap PinMap_ADC[] = {
{PA_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG_ADC_CONTROL, GPIO_NOPULL, 0, 5, 0)}, // IN5 - ARDUINO A0
{PA_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG_ADC_CONTROL, GPIO_NOPULL, 0, 6, 0)}, // IN6 - ARDUINO A1
{PA_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG_ADC_CONTROL, GPIO_NOPULL, 0, 7, 0)}, // IN7 // PA_2 is used as SERIAL_TX
{PA_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG_ADC_CONTROL, GPIO_NOPULL, 0, 8, 0)}, // IN8 // PA_3 is used as SERIAL_RX
{PA_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG_ADC_CONTROL, GPIO_NOPULL, 0, 9, 0)}, // IN9 - ARDUINO A2
{PA_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG_ADC_CONTROL, GPIO_NOPULL, 0, 10, 0)}, // IN10
{PA_6, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG_ADC_CONTROL, GPIO_NOPULL, 0, 11, 0)}, // IN11
{PA_7, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG_ADC_CONTROL, GPIO_NOPULL, 0, 12, 0)}, // IN12
{PB_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG_ADC_CONTROL, GPIO_NOPULL, 0, 15, 0)}, // IN15 - ARDUINO A3
{PB_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG_ADC_CONTROL, GPIO_NOPULL, 0, 16, 0)}, // IN16
{PC_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG_ADC_CONTROL, GPIO_NOPULL, 0, 1, 0)}, // IN1 - ARDUINO A5
{PC_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG_ADC_CONTROL, GPIO_NOPULL, 0, 2, 0)}, // IN2 - ARDUINO A4
{PC_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG_ADC_CONTROL, GPIO_NOPULL, 0, 3, 0)}, // IN3
{PC_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG_ADC_CONTROL, GPIO_NOPULL, 0, 4, 0)}, // IN4
{PC_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG_ADC_CONTROL, GPIO_NOPULL, 0, 13, 0)}, // IN13
{PC_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG_ADC_CONTROL, GPIO_NOPULL, 0, 14, 0)}, // IN14
{NC, NC, 0}
};
MBED_WEAK const PinMap PinMap_ADC_Internal[] = {
{ADC_TEMP, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 17, 0)},
{ADC_VREF, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)},
{ADC_VBAT, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 18, 0)},
{NC, NC, 0}
};
//*** DAC ***
MBED_WEAK const PinMap PinMap_DAC[] = {
{PA_4, DAC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // OUT1
{PA_5, DAC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // OUT2 (Warning: LED1 is also on this pin)
{NC, NC, 0}
};
//*** I2C ***
MBED_WEAK const PinMap PinMap_I2C_SDA[] = {
{PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
{PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
{PB_11, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
{PB_14, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
{PC_1, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
{NC, NC, 0}
};
MBED_WEAK const PinMap PinMap_I2C_SCL[] = {
{PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
{PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
{PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
{PB_13, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
{PC_0, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
{NC, NC, 0}
};
//*** PWM ***
// Warning: TIM5 cannot be used because already used by the us_ticker.
MBED_WEAK const PinMap PinMap_PWM[] = {
{PA_0, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
{PA_0, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1 (used by us_ticker)
{PA_1, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
{PA_1, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)}, // TIM5_CH2 (used by us_ticker)
{PA_1, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM15, 1, 1)},// TIM15_CH1N
{PA_2, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 // PA_2 is used as SERIAL_TX
{PA_2, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 3, 0)}, // TIM5_CH3 (used by us_ticker)
{PA_2, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM15, 1, 0)},// TIM15_CH1
{PA_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4 // PA_3 is used as SERIAL_RX
{PA_3, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 4, 0)}, // TIM5_CH4 (used by us_ticker)
// {PA_3, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM15, 2, 0)},// TIM15_CH2
{PA_5, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
// {PA_5, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 1)}, // TIM8_CH1N
{PA_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
// {PA_6, PWM_16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM16, 1, 0)},// TIM16_CH1
{PA_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 - ARDUINO D11
// {PA_7, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
// {PA_7, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 1)}, // TIM8_CH1N
// {PA_7, PWM_17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM17, 1, 0)},// TIM17_CH1
{PA_8, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
{PA_9, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
{PA_10, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
{PA_11, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
{PA_15, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
{PB_0, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
{PB_0, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
{PB_0, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)}, // TIM8_CH2N
{PB_1, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
{PB_1, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
{PB_1, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM8_CH3N
{PB_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 - ARDUINO D3
{PB_4, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 - ARDUINO D5
{PB_5, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
{PB_6, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1 - ARDUINO D10
{PB_6, PWM_16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM16, 1, 1)},// TIM16_CH1N
{PB_7, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2
{PB_7, PWM_17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM17, 1, 1)},// TIM17_CH1N
{PB_8, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3
{PB_6, PWM_16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM16, 1, 0)},// TIM16_CH1
{PB_9, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4
{PB_9, PWM_17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM17, 1, 0)},// TIM17_CH1
{PB_10, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 - ARDUINO D6
{PB_11, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
{PB_13, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
{PB_13, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM15, 1, 1)},// TIM15_CH1N
{PB_14, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
{PB_14, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM15, 1, 0)},// TIM15_CH1
{PB_14, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)}, // TIM8_CH2N
{PB_15, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
{PB_15, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM15, 2, 0)},// TIM15_CH2
{PB_15, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM8_CH3N
{PC_6, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 0)}, // TIM8_CH1
{PC_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
{PC_7, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 0)}, // TIM8_CH2 - ARDUINO D9
{PC_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
{PC_8, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 0)}, // TIM8_CH3
{PC_8, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
{PC_9, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 4, 0)}, // TIM8_CH4
{PC_9, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
{NC, NC, 0}
};
//*** SERIAL ***
MBED_WEAK const PinMap PinMap_UART_TX[] = {
{PA_0, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
{PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, // SERIAL_TX
{PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
{PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
{PB_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
{PB_11, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
{PC_1, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
{PC_4, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
{PC_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
{PC_10, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
{PC_12, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)},
{PD_8, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
{NC, NC, 0}
};
MBED_WEAK const PinMap PinMap_UART_RX[] = {
{PA_1, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
{PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, // SERIAL_RX
{PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
{PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
{PB_10, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
{PB_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
{PC_0, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
{PC_5, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
{PC_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
{PC_11, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
{PD_2, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)},
{PD_9, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
{NC, NC, 0}
};
MBED_WEAK const PinMap PinMap_UART_RTS[] = {
{PA_1, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
{PA_12, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
// {PA_15, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
{PB_14, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, // MEMs
// {PC_8, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_UART5)},
{PD_4, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
{PD_12, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, // LED D4
{NC, NC, 0}
};
MBED_WEAK const PinMap PinMap_UART_CTS[] = {
{PA_0, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
{PA_11, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
// {PB_0, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
{PB_13, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
// {PC_9, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_UART5)},
{PD_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
{PD_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, // LED D4
{NC, NC, 0}
};
//*** SPI ***
MBED_WEAK const PinMap PinMap_SPI_MOSI[] = {
{PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO D11
{PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
{PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
{PC_3, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
{PC_12, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
{NC, NC, 0}
};
MBED_WEAK const PinMap PinMap_SPI_MISO[] = {
{PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO D12
{PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
{PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
{PC_2, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
{PC_11, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
{NC, NC, 0}
};
MBED_WEAK const PinMap PinMap_SPI_SCLK[] = {
{PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO D13
{PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
{PB_10, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
{PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
{PC_10, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
{NC, NC, 0}
};
MBED_WEAK const PinMap PinMap_SPI_SSEL[] = {
{PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
// {PA_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
{PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
// {PA_15, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
{PB_9, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
{PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
{NC, NC, 0}
};
MBED_WEAK const PinMap PinMap_CAN_RD[] = {
{PB_8 , CAN_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)},
{PA_11, CAN_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)},
{NC, NC, 0}
};
MBED_WEAK const PinMap PinMap_CAN_TD[] = {
{PB_9 , CAN_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)},
{PA_12, CAN_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)},
{NC, NC, 0}
};

399
targets/TARGET_STM/TARGET_STM32L4/TARGET_MTS_DRAGONFLY_L471QG/PinNames.h Executable file
View File

@ -0,0 +1,399 @@
/* mbed Microcontroller Library
*******************************************************************************
* Copyright (c) 2016, STMicroelectronics
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************
*/
#ifndef MBED_PINNAMES_H
#define MBED_PINNAMES_H
#include "cmsis.h"
#include "PinNamesTypes.h"
#ifdef __cplusplus
extern "C" {
#endif
typedef enum {
PA_0 = 0x00,
PA_1 = 0x01,
PA_2 = 0x02,
PA_3 = 0x03,
PA_4 = 0x04,
PA_5 = 0x05,
PA_6 = 0x06,
PA_7 = 0x07,
PA_8 = 0x08,
PA_9 = 0x09,
PA_10 = 0x0A,
PA_11 = 0x0B,
PA_12 = 0x0C,
PA_13 = 0x0D,
PA_14 = 0x0E,
PA_15 = 0x0F,
PB_0 = 0x10,
PB_1 = 0x11,
PB_2 = 0x12,
PB_3 = 0x13,
PB_4 = 0x14,
PB_5 = 0x15,
PB_6 = 0x16,
PB_7 = 0x17,
PB_8 = 0x18,
PB_9 = 0x19,
PB_10 = 0x1A,
PB_11 = 0x1B,
PB_12 = 0x1C,
PB_13 = 0x1D,
PB_14 = 0x1E,
PB_15 = 0x1F,
PC_0 = 0x20,
PC_1 = 0x21,
PC_2 = 0x22,
PC_3 = 0x23,
PC_4 = 0x24,
PC_5 = 0x25,
PC_6 = 0x26,
PC_7 = 0x27,
PC_8 = 0x28,
PC_9 = 0x29,
PC_10 = 0x2A,
PC_11 = 0x2B,
PC_12 = 0x2C,
PC_13 = 0x2D,
PC_14 = 0x2E,
PC_15 = 0x2F,
PD_0 = 0x30,
PD_1 = 0x31,
PD_2 = 0x32,
PD_3 = 0x33,
PD_4 = 0x34,
PD_5 = 0x35,
PD_6 = 0x36,
PD_7 = 0x37,
PD_8 = 0x38,
PD_9 = 0x39,
PD_10 = 0x3A,
PD_11 = 0x3B,
PD_12 = 0x3C,
PD_13 = 0x3D,
PD_14 = 0x3E,
PD_15 = 0x3F,
PE_0 = 0x40,
PE_1 = 0x41,
PE_2 = 0x42,
PE_3 = 0x43,
PE_4 = 0x44,
PE_5 = 0x45,
PE_6 = 0x46,
PE_7 = 0x47,
PE_8 = 0x48,
PE_9 = 0x49,
PE_10 = 0x4A,
PE_11 = 0x4B,
PE_12 = 0x4C,
PE_13 = 0x4D,
PE_14 = 0x4E,
PE_15 = 0x4F,
PF_0 = 0x50,
PF_1 = 0x51,
PF_2 = 0x52,
PF_3 = 0x53,
PF_4 = 0x54,
PF_5 = 0x55,
PF_6 = 0x56,
PF_7 = 0x57,
PF_8 = 0x58,
PF_9 = 0x59,
PF_10 = 0x5A,
PF_11 = 0x5B,
PF_12 = 0x5C,
PF_13 = 0x5D,
PF_14 = 0x5E,
PF_15 = 0x5F,
PG_0 = 0x60,
PG_1 = 0x61,
PG_2 = 0x62,
PG_3 = 0x63,
PG_4 = 0x64,
PG_5 = 0x65,
PG_6 = 0x66,
PG_7 = 0x67,
PG_8 = 0x68,
PG_9 = 0x69,
PG_10 = 0x6A,
PG_11 = 0x6B,
PG_12 = 0x6C,
PG_13 = 0x6D,
PG_14 = 0x6E,
PG_15 = 0x6F,
PH_0 = 0x70,
PH_1 = 0x71,
// ADC internal channels
ADC_TEMP = 0xF0,
ADC_VREF = 0xF1,
ADC_VBAT = 0xF2,
// Arduino connector namings
A0 = PC_2,
A1 = PC_0, //rev b PC_0; rev c PC_13
A2 = PC_4,
A3 = PB_1, //reb b PB_1; rev c PE_6
A4 = PA_6,
A5 = PG_8,
D0 = PA_3,
D1 = PA_2,
D2 = PB_15,
D3 = PA_0,
D4 = PA_7,
D5 = PA_9,
D6 = PA_1,
D7 = PG_7,
D8 = PB_0,
D9 = PB_10,
D10 = PC_8,
D11 = PB_5,
D12 = PG_3,
D13 = PG_2,
D14 = PB_9,
D15 = PB_8,
// 40 pin
IO_00 = D1,
IO_01 = D4,
IO_02 = D8,
IO_03 = D6,
IO_04 = D11,
IO_05 = D13,
IO_06 = D15,
IO_07 = D2,
IO_08 = A0,
IO_09 = A3,
IO_10 = A1,
IO_11 = A4,
IO_12 = A2,
IO_13 = D9,
IO_14 = A5,
IO_15 = D14,
IO_16 = D12,
IO_17 = D10,
IO_18 = D3,
IO_19 = D5,
IO_20 = D7,
IO_21 = D0,
// 40 pin USB debug port
USBTX = PB_6,
USBRX = PB_7,
//UARTS
UART3_TX = PD_2,
UART3_RX = PD_9,
UART3_CTS = PD_11,
UART3_RTS = PD_12,
UART2_TX = PA_2,
UART2_RX = PA_3,
UART2_RTS = PA_1,
UART2_CTS = PA_0,
UART2_DSR = PA_9,
UART2_DTR = PG_7,
UART2_DCD = PA_7,
UART1_TX = PB_6,
UART1_RX = PB_7,
UART1_RTS = PA_12,
UART1_CTS = PA_11,
// 40 pin JTAG/SWD
J_TCK = PA_14, // a.k.a. SWCLK
J_TDI = PA_15,
J_RST = PB_4,
J_TDO = PB_3, // a.k.a. SWO
J_TMS = PA_13, // a.k.a. SWDIO
// Generic signals namings
LED1 = D3,
LED2 = D3,
LED3 = D3,
LED4 = D3,
// SERIAL PORT
SERIAL_TX = D1,
SERIAL_RX = D0,
SERIAL_RTS = D6,
SERIAL_CTS = D3,
SERIAL_DCD = D4,
SERIAL_DSR = D5,
SERIAL_DTR = D7,
SERIAL_RI = D8,
// SPI1 and SPI2 are available on Arduino pins
SPI1_MOSI = D11,
SPI1_MISO = D12,
SPI1_SCK = D13,
SPI2_MOSI = D2,
SPI2_MISO = A0,
SPI2_SCK = D9,
// SPI3 connects to flash part
SPI3_MOSI = PC_12,
SPI3_MISO = PC_11,
SPI3_SCK = PC_10,
SPI3_SSEL = PG_12,
// I2C1 and I2C3 are available on Arduino pins
I2C1_SCL = D15,
I2C1_SDA = D14,
I2C3_SCL = D7,
I2C3_SDA = A5,
// Modem
RADIO_PWR = PC_3,
RADIO_RESET = PF_3,
RADIO_TX = PD_8,
RADIO_RX = PD_9,
RADIO_RI = PD_10,
RADIO_CTS = PD_11,
RADIO_RTS = PD_12,
RADIO_DTR = PD_13,
RADIO_DCD = PD_14,
RADIO_DSR = PD_15,
RADIO_ONOFF = PE_4, //rev b PC_13; rev c PC_0 PE_4
MON_1V8 = PC_5,
VUSB_EN = PE_3,
// Power control for level shifter and SPI flash. Low powers on.
BUF_EN = PC_6,
VMEM_EN = PE_1,
VUSB_DET = PE_3,
MDMPWRON = RADIO_ONOFF, // 3G_ONOFF DragonFly Design Guide, Page No. 16
MDMTXD = RADIO_TX, // Transmit Data
MDMRXD = RADIO_RX, // Receive Data
MDMRTS = RADIO_RTS, // Request to Send
MDMCTS = RADIO_CTS, // Clear to Send
MDMDCD = RADIO_DCD, // Data Carrier Detect
MDMDSR = RADIO_DSR, // Data Set Ready
MDMDTR = RADIO_DTR, // Data Terminal Ready
MDMRI = RADIO_RI, // Ring Indicator
CELL_GPIO5 = PE_11,
CELL_GPIO2 = PE_13,
CELL_GPIO3 = PE_14,
CELL_GPIO4 = PE_15,
// Voltage measuring
VCC_IN_MEAS_EN = PB_12,
VCC_IN_MEAS = PC_0,
// added to support ppp
MDM_PIN_POLARITY = 0,
MDMRST = RADIO_RESET,
MDMCURRENTSENSE = (int) 0xFFFFFFFF,
// GNSS
GNSSEN = (int) 0xFFFFFFFF, // VCC_IO to GNSS, should be set to push-pull, no pull-up, output
GNSSTXD =(int) 0xFFFFFFFF,
GNSSRXD = (int) 0xFFFFFFFF,
PWR3V3 = (int) 0xFFFFFFFF,
WAKEUP = D3,
// TIMERS
TIM2_1 = PA_15,
TIM2_2 = PB_3,
TIM2_3 = PA_2,
TIM3_1 = PB_4,
TIM3_2 = PA_7,
TIM3_3 = PB_0,
TIM4_3 = PB_8,
TIM5_1 = PA_0,
TIM5_2 = PA_1,
TIM5_3 = PA_2,
TIM7_1 = PA_7,
TIM8_3 = PC_8,
// CAN
CAN1_TX = PB_9,
CAN1_RX = PB_8,
// ADC
ADC1_IN7 = PA_2,
ADC2_IN7 = PA_2,
ADC1_IN12 = PA_7,
ADC2_IN12 = PA_7,
ADC1_IN15 = PB_0,
ADC2_IN15 = PB_0,
ADC1_IN6 = PA_1,
ADC2_IN6 = PA_1,
ADC1_IN3 = PC_2,
ADC2_IN3 = PC_2,
ADC3_IN3 = PC_2,
ADC1_IN16 = PB_1,
ADC2_IN16 = PB_1,
ADC1_IN1 = PC_2,
ADC2_IN1 = PC_2,
ADC3_IN1 = PC_2,
ADC1_IN11 = PA_6,
ADC2_IN11 = PA_6,
ADC1_IN13 = PC_4,
ADC2_IN13 = PC_4,
//ADC1_IN13 = PA_0,
//ADC2_IN13 = PA_0,
ADC1_IN8 = PA_3,
ADC2_IN8 = PA_3,
// Not connected
NC = (int) 0xFFFFFFFF
} PinName;
#ifdef __cplusplus
}
#endif
#endif

408
targets/TARGET_STM/TARGET_STM32L4/TARGET_MTS_DRAGONFLY_L471QG/device/TOOLCHAIN_ARM_MICRO/startup_stm32l476xx.S Normal file
View File

@ -0,0 +1,408 @@
;********************** COPYRIGHT(c) 2016 STMicroelectronics ******************
;* File Name : startup_stm32l476xx.s
;* Author : MCD Application Team
;* Version : V1.1.1
;* Date : 29-April-2016
;* Description : STM32L476xx Ultra Low Power devices vector table for MDK-ARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == Reset_Handler
;* - Set the vector table entries with the exceptions ISR address
;* - Branches to __main in the C library (which eventually
;* calls main()).
;* After Reset the Cortex-M4 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;* <<< Use Configuration Wizard in Context Menu >>>
;*******************************************************************************
;*
;* Redistribution and use in source and binary forms, with or without modification,
;* are permitted provided that the following conditions are met:
;* 1. Redistributions of source code must retain the above copyright notice,
;* this list of conditions and the following disclaimer.
;* 2. Redistributions in binary form must reproduce the above copyright notice,
;* this list of conditions and the following disclaimer in the documentation
;* and/or other materials provided with the distribution.
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
;* may be used to endorse or promote products derived from this software
;* without specific prior written permission.
;*
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;
;*******************************************************************************
AREA STACK, NOINIT, READWRITE, ALIGN=3
EXPORT __initial_sp
__initial_sp EQU 0x20018000 ; Top of RAM, L4-ECC-SRAM2 retained in standby
; <h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Heap_Size EQU 0x17800 ; 94KB (96KB, -2*1KB for main thread and scheduler)
AREA HEAP, NOINIT, READWRITE, ALIGN=3
EXPORT __heap_base
EXPORT __heap_limit
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD MemManage_Handler ; MPU Fault Handler
DCD BusFault_Handler ; Bus Fault Handler
DCD UsageFault_Handler ; Usage Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD DebugMon_Handler ; Debug Monitor Handler
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window WatchDog
DCD PVD_PVM_IRQHandler ; PVD/PVM1/PVM2/PVM3/PVM4 through EXTI Line detection
DCD TAMP_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line
DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_IRQHandler ; RCC
DCD EXTI0_IRQHandler ; EXTI Line0
DCD EXTI1_IRQHandler ; EXTI Line1
DCD EXTI2_IRQHandler ; EXTI Line2
DCD EXTI3_IRQHandler ; EXTI Line3
DCD EXTI4_IRQHandler ; EXTI Line4
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
DCD ADC1_2_IRQHandler ; ADC1, ADC2
DCD CAN1_TX_IRQHandler ; CAN1 TX
DCD CAN1_RX0_IRQHandler ; CAN1 RX0
DCD CAN1_RX1_IRQHandler ; CAN1 RX1
DCD CAN1_SCE_IRQHandler ; CAN1 SCE
DCD EXTI9_5_IRQHandler ; External Line[9:5]s
DCD TIM1_BRK_TIM15_IRQHandler ; TIM1 Break and TIM15
DCD TIM1_UP_TIM16_IRQHandler ; TIM1 Update and TIM16
DCD TIM1_TRG_COM_TIM17_IRQHandler ; TIM1 Trigger and Commutation and TIM17
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM4_IRQHandler ; TIM4
DCD I2C1_EV_IRQHandler ; I2C1 Event
DCD I2C1_ER_IRQHandler ; I2C1 Error
DCD I2C2_EV_IRQHandler ; I2C2 Event
DCD I2C2_ER_IRQHandler ; I2C2 Error
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_IRQHandler ; USART3
DCD EXTI15_10_IRQHandler ; External Line[15:10]
DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line
DCD DFSDM1_FLT3_IRQHandler ; DFSDM1 Filter 3 global Interrupt
DCD TIM8_BRK_IRQHandler ; TIM8 Break Interrupt
DCD TIM8_UP_IRQHandler ; TIM8 Update Interrupt
DCD TIM8_TRG_COM_IRQHandler ; TIM8 Trigger and Commutation Interrupt
DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare Interrupt
DCD ADC3_IRQHandler ; ADC3 global Interrupt
DCD FMC_IRQHandler ; FMC
DCD SDMMC1_IRQHandler ; SDMMC1
DCD TIM5_IRQHandler ; TIM5
DCD SPI3_IRQHandler ; SPI3
DCD UART4_IRQHandler ; UART4
DCD UART5_IRQHandler ; UART5
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC1&2 underrun errors
DCD TIM7_IRQHandler ; TIM7
DCD DMA2_Channel1_IRQHandler ; DMA2 Channel 1
DCD DMA2_Channel2_IRQHandler ; DMA2 Channel 2
DCD DMA2_Channel3_IRQHandler ; DMA2 Channel 3
DCD DMA2_Channel4_IRQHandler ; DMA2 Channel 4
DCD DMA2_Channel5_IRQHandler ; DMA2 Channel 5
DCD DFSDM1_FLT0_IRQHandler ; DFSDM1 Filter 0 global Interrupt
DCD DFSDM1_FLT1_IRQHandler ; DFSDM1 Filter 1 global Interrupt
DCD DFSDM1_FLT2_IRQHandler ; DFSDM1 Filter 2 global Interrupt
DCD COMP_IRQHandler ; COMP Interrupt
DCD LPTIM1_IRQHandler ; LP TIM1 interrupt
DCD LPTIM2_IRQHandler ; LP TIM2 interrupt
DCD OTG_FS_IRQHandler ; USB OTG FS
DCD DMA2_Channel6_IRQHandler ; DMA2 Channel 6
DCD DMA2_Channel7_IRQHandler ; DMA2 Channel 7
DCD LPUART1_IRQHandler ; LP UART1 interrupt
DCD QUADSPI_IRQHandler ; Quad SPI global interrupt
DCD I2C3_EV_IRQHandler ; I2C3 event
DCD I2C3_ER_IRQHandler ; I2C3 error
DCD SAI1_IRQHandler ; Serial Audio Interface 1 global interrupt
DCD SAI2_IRQHandler ; Serial Audio Interface 2 global interrupt
DCD SWPMI1_IRQHandler ; Serial Wire Interface 1 global interrupt
DCD TSC_IRQHandler ; Touch Sense Controller global interrupt
DCD LCD_IRQHandler ; LCD global interrupt
DCD 0 ; Reserved
DCD RNG_IRQHandler ; RNG global interrupt
DCD FPU_IRQHandler ; FPU
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset handler
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT SystemInit
IMPORT __main
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
MemManage_Handler\
PROC
EXPORT MemManage_Handler [WEAK]
B .
ENDP
BusFault_Handler\
PROC
EXPORT BusFault_Handler [WEAK]
B .
ENDP
UsageFault_Handler\
PROC
EXPORT UsageFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
DebugMon_Handler\
PROC
EXPORT DebugMon_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT WWDG_IRQHandler [WEAK]
EXPORT PVD_PVM_IRQHandler [WEAK]
EXPORT TAMP_STAMP_IRQHandler [WEAK]
EXPORT RTC_WKUP_IRQHandler [WEAK]
EXPORT FLASH_IRQHandler [WEAK]
EXPORT RCC_IRQHandler [WEAK]
EXPORT EXTI0_IRQHandler [WEAK]
EXPORT EXTI1_IRQHandler [WEAK]
EXPORT EXTI2_IRQHandler [WEAK]
EXPORT EXTI3_IRQHandler [WEAK]
EXPORT EXTI4_IRQHandler [WEAK]
EXPORT DMA1_Channel1_IRQHandler [WEAK]
EXPORT DMA1_Channel2_IRQHandler [WEAK]
EXPORT DMA1_Channel3_IRQHandler [WEAK]
EXPORT DMA1_Channel4_IRQHandler [WEAK]
EXPORT DMA1_Channel5_IRQHandler [WEAK]
EXPORT DMA1_Channel6_IRQHandler [WEAK]
EXPORT DMA1_Channel7_IRQHandler [WEAK]
EXPORT ADC1_2_IRQHandler [WEAK]
EXPORT CAN1_TX_IRQHandler [WEAK]
EXPORT CAN1_RX0_IRQHandler [WEAK]
EXPORT CAN1_RX1_IRQHandler [WEAK]
EXPORT CAN1_SCE_IRQHandler [WEAK]
EXPORT EXTI9_5_IRQHandler [WEAK]
EXPORT TIM1_BRK_TIM15_IRQHandler [WEAK]
EXPORT TIM1_UP_TIM16_IRQHandler [WEAK]
EXPORT TIM1_TRG_COM_TIM17_IRQHandler [WEAK]
EXPORT TIM1_CC_IRQHandler [WEAK]
EXPORT TIM2_IRQHandler [WEAK]
EXPORT TIM3_IRQHandler [WEAK]
EXPORT TIM4_IRQHandler [WEAK]
EXPORT I2C1_EV_IRQHandler [WEAK]
EXPORT I2C1_ER_IRQHandler [WEAK]
EXPORT I2C2_EV_IRQHandler [WEAK]
EXPORT I2C2_ER_IRQHandler [WEAK]
EXPORT SPI1_IRQHandler [WEAK]
EXPORT SPI2_IRQHandler [WEAK]
EXPORT USART1_IRQHandler [WEAK]
EXPORT USART2_IRQHandler [WEAK]
EXPORT USART3_IRQHandler [WEAK]
EXPORT EXTI15_10_IRQHandler [WEAK]
EXPORT RTC_Alarm_IRQHandler [WEAK]
EXPORT DFSDM1_FLT3_IRQHandler [WEAK]
EXPORT TIM8_BRK_IRQHandler [WEAK]
EXPORT TIM8_UP_IRQHandler [WEAK]
EXPORT TIM8_TRG_COM_IRQHandler [WEAK]
EXPORT TIM8_CC_IRQHandler [WEAK]
EXPORT ADC3_IRQHandler [WEAK]
EXPORT FMC_IRQHandler [WEAK]
EXPORT SDMMC1_IRQHandler [WEAK]
EXPORT TIM5_IRQHandler [WEAK]
EXPORT SPI3_IRQHandler [WEAK]
EXPORT UART4_IRQHandler [WEAK]
EXPORT UART5_IRQHandler [WEAK]
EXPORT TIM6_DAC_IRQHandler [WEAK]
EXPORT TIM7_IRQHandler [WEAK]
EXPORT DMA2_Channel1_IRQHandler [WEAK]
EXPORT DMA2_Channel2_IRQHandler [WEAK]
EXPORT DMA2_Channel3_IRQHandler [WEAK]
EXPORT DMA2_Channel4_IRQHandler [WEAK]
EXPORT DMA2_Channel5_IRQHandler [WEAK]
EXPORT DFSDM1_FLT0_IRQHandler [WEAK]
EXPORT DFSDM1_FLT1_IRQHandler [WEAK]
EXPORT DFSDM1_FLT2_IRQHandler [WEAK]
EXPORT COMP_IRQHandler [WEAK]
EXPORT LPTIM1_IRQHandler [WEAK]
EXPORT LPTIM2_IRQHandler [WEAK]
EXPORT OTG_FS_IRQHandler [WEAK]
EXPORT DMA2_Channel6_IRQHandler [WEAK]
EXPORT DMA2_Channel7_IRQHandler [WEAK]
EXPORT LPUART1_IRQHandler [WEAK]
EXPORT QUADSPI_IRQHandler [WEAK]
EXPORT I2C3_EV_IRQHandler [WEAK]
EXPORT I2C3_ER_IRQHandler [WEAK]
EXPORT SAI1_IRQHandler [WEAK]
EXPORT SAI2_IRQHandler [WEAK]
EXPORT SWPMI1_IRQHandler [WEAK]
EXPORT TSC_IRQHandler [WEAK]
EXPORT LCD_IRQHandler [WEAK]
EXPORT RNG_IRQHandler [WEAK]
EXPORT FPU_IRQHandler [WEAK]
WWDG_IRQHandler
PVD_PVM_IRQHandler
TAMP_STAMP_IRQHandler
RTC_WKUP_IRQHandler
FLASH_IRQHandler
RCC_IRQHandler
EXTI0_IRQHandler
EXTI1_IRQHandler
EXTI2_IRQHandler
EXTI3_IRQHandler
EXTI4_IRQHandler
DMA1_Channel1_IRQHandler
DMA1_Channel2_IRQHandler
DMA1_Channel3_IRQHandler
DMA1_Channel4_IRQHandler
DMA1_Channel5_IRQHandler
DMA1_Channel6_IRQHandler
DMA1_Channel7_IRQHandler
ADC1_2_IRQHandler
CAN1_TX_IRQHandler
CAN1_RX0_IRQHandler
CAN1_RX1_IRQHandler
CAN1_SCE_IRQHandler
EXTI9_5_IRQHandler
TIM1_BRK_TIM15_IRQHandler
TIM1_UP_TIM16_IRQHandler
TIM1_TRG_COM_TIM17_IRQHandler
TIM1_CC_IRQHandler
TIM2_IRQHandler
TIM3_IRQHandler
TIM4_IRQHandler
I2C1_EV_IRQHandler
I2C1_ER_IRQHandler
I2C2_EV_IRQHandler
I2C2_ER_IRQHandler
SPI1_IRQHandler
SPI2_IRQHandler
USART1_IRQHandler
USART2_IRQHandler
USART3_IRQHandler
EXTI15_10_IRQHandler
RTC_Alarm_IRQHandler
DFSDM1_FLT3_IRQHandler
TIM8_BRK_IRQHandler
TIM8_UP_IRQHandler
TIM8_TRG_COM_IRQHandler
TIM8_CC_IRQHandler
ADC3_IRQHandler
FMC_IRQHandler
SDMMC1_IRQHandler
TIM5_IRQHandler
SPI3_IRQHandler
UART4_IRQHandler
UART5_IRQHandler
TIM6_DAC_IRQHandler
TIM7_IRQHandler
DMA2_Channel1_IRQHandler
DMA2_Channel2_IRQHandler
DMA2_Channel3_IRQHandler
DMA2_Channel4_IRQHandler
DMA2_Channel5_IRQHandler
DFSDM1_FLT0_IRQHandler
DFSDM1_FLT1_IRQHandler
DFSDM1_FLT2_IRQHandler
COMP_IRQHandler
LPTIM1_IRQHandler
LPTIM2_IRQHandler
OTG_FS_IRQHandler
DMA2_Channel6_IRQHandler
DMA2_Channel7_IRQHandler
LPUART1_IRQHandler
QUADSPI_IRQHandler
I2C3_EV_IRQHandler
I2C3_ER_IRQHandler
SAI1_IRQHandler
SAI2_IRQHandler
SWPMI1_IRQHandler
TSC_IRQHandler
LCD_IRQHandler
RNG_IRQHandler
FPU_IRQHandler
B .
ENDP
ALIGN
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****

57
targets/TARGET_STM/TARGET_STM32L4/TARGET_MTS_DRAGONFLY_L471QG/device/TOOLCHAIN_ARM_MICRO/stm32l476xx.sct Normal file
View File

@ -0,0 +1,57 @@
#! armcc -E
; Scatter-Loading Description File
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Copyright (c) 2015, STMicroelectronics
; All rights reserved.
;
; Redistribution and use in source and binary forms, with or without
; modification, are permitted provided that the following conditions are met:
;
; 1. Redistributions of source code must retain the above copyright notice,
; this list of conditions and the following disclaimer.
; 2. Redistributions in binary form must reproduce the above copyright notice,
; this list of conditions and the following disclaimer in the documentation
; and/or other materials provided with the distribution.
; 3. Neither the name of STMicroelectronics nor the names of its contributors
; may be used to endorse or promote products derived from this software
; without specific prior written permission.
;
; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
; DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
; SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
; CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
; OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
#if !defined(MBED_APP_START)
#define MBED_APP_START 0x08000000
#endif
#if !defined(MBED_APP_SIZE)
#define MBED_APP_SIZE 0x100000
#endif
; 1MB FLASH (0x100000) + 128KB SRAM (0x20000)
LR_IROM1 MBED_APP_START MBED_APP_SIZE { ; load region size_region
ER_IROM1 MBED_APP_START MBED_APP_SIZE { ; load address = execution address
*.o (RESET, +First)
*(InRoot$$Sections)
.ANY (+RO)
}
RW_IRAM1 0x20000000 0x00018000 { ; RW data 96k L4-SRAM1
.ANY (+RW +ZI)
}
; Total: 98 vectors = 392 bytes (0x188) to be reserved in RAM
RW_IRAM2 (0x10000000+0x188) (0x08000-0x188) { ; RW data 32k L4-ECC-SRAM2 retained in standby
.ANY (+RW +ZI)
}
}

390
targets/TARGET_STM/TARGET_STM32L4/TARGET_MTS_DRAGONFLY_L471QG/device/TOOLCHAIN_ARM_STD/startup_stm32l476xx.S Normal file
View File

@ -0,0 +1,390 @@
;********************** COPYRIGHT(c) 2016 STMicroelectronics ******************
;* File Name : startup_stm32l476xx.s
;* Author : MCD Application Team
;* Version : V1.1.1
;* Date : 29-April-2016
;* Description : STM32L476xx Ultra Low Power devices vector table for MDK-ARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == Reset_Handler
;* - Set the vector table entries with the exceptions ISR address
;* - Branches to __main in the C library (which eventually
;* calls main()).
;* After Reset the Cortex-M4 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;* <<< Use Configuration Wizard in Context Menu >>>
;*******************************************************************************
;*
;* Redistribution and use in source and binary forms, with or without modification,
;* are permitted provided that the following conditions are met:
;* 1. Redistributions of source code must retain the above copyright notice,
;* this list of conditions and the following disclaimer.
;* 2. Redistributions in binary form must reproduce the above copyright notice,
;* this list of conditions and the following disclaimer in the documentation
;* and/or other materials provided with the distribution.
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
;* may be used to endorse or promote products derived from this software
;* without specific prior written permission.
;*
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;
;*******************************************************************************
__initial_sp EQU 0x20018000 ; Top of RAM, L4-ECC-SRAM2 retained in standby
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD MemManage_Handler ; MPU Fault Handler
DCD BusFault_Handler ; Bus Fault Handler
DCD UsageFault_Handler ; Usage Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD DebugMon_Handler ; Debug Monitor Handler
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window WatchDog
DCD PVD_PVM_IRQHandler ; PVD/PVM1/PVM2/PVM3/PVM4 through EXTI Line detection
DCD TAMP_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line
DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_IRQHandler ; RCC
DCD EXTI0_IRQHandler ; EXTI Line0
DCD EXTI1_IRQHandler ; EXTI Line1
DCD EXTI2_IRQHandler ; EXTI Line2
DCD EXTI3_IRQHandler ; EXTI Line3
DCD EXTI4_IRQHandler ; EXTI Line4
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
DCD ADC1_2_IRQHandler ; ADC1, ADC2
DCD CAN1_TX_IRQHandler ; CAN1 TX
DCD CAN1_RX0_IRQHandler ; CAN1 RX0
DCD CAN1_RX1_IRQHandler ; CAN1 RX1
DCD CAN1_SCE_IRQHandler ; CAN1 SCE
DCD EXTI9_5_IRQHandler ; External Line[9:5]s
DCD TIM1_BRK_TIM15_IRQHandler ; TIM1 Break and TIM15
DCD TIM1_UP_TIM16_IRQHandler ; TIM1 Update and TIM16
DCD TIM1_TRG_COM_TIM17_IRQHandler ; TIM1 Trigger and Commutation and TIM17
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM4_IRQHandler ; TIM4
DCD I2C1_EV_IRQHandler ; I2C1 Event
DCD I2C1_ER_IRQHandler ; I2C1 Error
DCD I2C2_EV_IRQHandler ; I2C2 Event
DCD I2C2_ER_IRQHandler ; I2C2 Error
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_IRQHandler ; USART3
DCD EXTI15_10_IRQHandler ; External Line[15:10]
DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line
DCD DFSDM1_FLT3_IRQHandler ; DFSDM1 Filter 3 global Interrupt
DCD TIM8_BRK_IRQHandler ; TIM8 Break Interrupt
DCD TIM8_UP_IRQHandler ; TIM8 Update Interrupt
DCD TIM8_TRG_COM_IRQHandler ; TIM8 Trigger and Commutation Interrupt
DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare Interrupt
DCD ADC3_IRQHandler ; ADC3 global Interrupt
DCD FMC_IRQHandler ; FMC
DCD SDMMC1_IRQHandler ; SDMMC1
DCD TIM5_IRQHandler ; TIM5
DCD SPI3_IRQHandler ; SPI3
DCD UART4_IRQHandler ; UART4
DCD UART5_IRQHandler ; UART5
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC1&2 underrun errors
DCD TIM7_IRQHandler ; TIM7
DCD DMA2_Channel1_IRQHandler ; DMA2 Channel 1
DCD DMA2_Channel2_IRQHandler ; DMA2 Channel 2
DCD DMA2_Channel3_IRQHandler ; DMA2 Channel 3
DCD DMA2_Channel4_IRQHandler ; DMA2 Channel 4
DCD DMA2_Channel5_IRQHandler ; DMA2 Channel 5
DCD DFSDM1_FLT0_IRQHandler ; DFSDM1 Filter 0 global Interrupt
DCD DFSDM1_FLT1_IRQHandler ; DFSDM1 Filter 1 global Interrupt
DCD DFSDM1_FLT2_IRQHandler ; DFSDM1 Filter 2 global Interrupt
DCD COMP_IRQHandler ; COMP Interrupt
DCD LPTIM1_IRQHandler ; LP TIM1 interrupt
DCD LPTIM2_IRQHandler ; LP TIM2 interrupt
DCD OTG_FS_IRQHandler ; USB OTG FS
DCD DMA2_Channel6_IRQHandler ; DMA2 Channel 6
DCD DMA2_Channel7_IRQHandler ; DMA2 Channel 7
DCD LPUART1_IRQHandler ; LP UART1 interrupt
DCD QUADSPI_IRQHandler ; Quad SPI global interrupt
DCD I2C3_EV_IRQHandler ; I2C3 event
DCD I2C3_ER_IRQHandler ; I2C3 error
DCD SAI1_IRQHandler ; Serial Audio Interface 1 global interrupt
DCD SAI2_IRQHandler ; Serial Audio Interface 2 global interrupt
DCD SWPMI1_IRQHandler ; Serial Wire Interface 1 global interrupt
DCD TSC_IRQHandler ; Touch Sense Controller global interrupt
DCD LCD_IRQHandler ; LCD global interrupt
DCD 0 ; Reserved
DCD RNG_IRQHandler ; RNG global interrupt
DCD FPU_IRQHandler ; FPU
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset handler
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT SystemInit
IMPORT __main
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
MemManage_Handler\
PROC
EXPORT MemManage_Handler [WEAK]
B .
ENDP
BusFault_Handler\
PROC
EXPORT BusFault_Handler [WEAK]
B .
ENDP
UsageFault_Handler\
PROC
EXPORT UsageFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
DebugMon_Handler\
PROC
EXPORT DebugMon_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT WWDG_IRQHandler [WEAK]
EXPORT PVD_PVM_IRQHandler [WEAK]
EXPORT TAMP_STAMP_IRQHandler [WEAK]
EXPORT RTC_WKUP_IRQHandler [WEAK]
EXPORT FLASH_IRQHandler [WEAK]
EXPORT RCC_IRQHandler [WEAK]
EXPORT EXTI0_IRQHandler [WEAK]
EXPORT EXTI1_IRQHandler [WEAK]
EXPORT EXTI2_IRQHandler [WEAK]
EXPORT EXTI3_IRQHandler [WEAK]
EXPORT EXTI4_IRQHandler [WEAK]
EXPORT DMA1_Channel1_IRQHandler [WEAK]
EXPORT DMA1_Channel2_IRQHandler [WEAK]
EXPORT DMA1_Channel3_IRQHandler [WEAK]
EXPORT DMA1_Channel4_IRQHandler [WEAK]
EXPORT DMA1_Channel5_IRQHandler [WEAK]
EXPORT DMA1_Channel6_IRQHandler [WEAK]
EXPORT DMA1_Channel7_IRQHandler [WEAK]
EXPORT ADC1_2_IRQHandler [WEAK]
EXPORT CAN1_TX_IRQHandler [WEAK]
EXPORT CAN1_RX0_IRQHandler [WEAK]
EXPORT CAN1_RX1_IRQHandler [WEAK]
EXPORT CAN1_SCE_IRQHandler [WEAK]
EXPORT EXTI9_5_IRQHandler [WEAK]
EXPORT TIM1_BRK_TIM15_IRQHandler [WEAK]
EXPORT TIM1_UP_TIM16_IRQHandler [WEAK]
EXPORT TIM1_TRG_COM_TIM17_IRQHandler [WEAK]
EXPORT TIM1_CC_IRQHandler [WEAK]
EXPORT TIM2_IRQHandler [WEAK]
EXPORT TIM3_IRQHandler [WEAK]
EXPORT TIM4_IRQHandler [WEAK]
EXPORT I2C1_EV_IRQHandler [WEAK]
EXPORT I2C1_ER_IRQHandler [WEAK]
EXPORT I2C2_EV_IRQHandler [WEAK]
EXPORT I2C2_ER_IRQHandler [WEAK]
EXPORT SPI1_IRQHandler [WEAK]
EXPORT SPI2_IRQHandler [WEAK]
EXPORT USART1_IRQHandler [WEAK]
EXPORT USART2_IRQHandler [WEAK]
EXPORT USART3_IRQHandler [WEAK]
EXPORT EXTI15_10_IRQHandler [WEAK]
EXPORT RTC_Alarm_IRQHandler [WEAK]
EXPORT DFSDM1_FLT3_IRQHandler [WEAK]
EXPORT TIM8_BRK_IRQHandler [WEAK]
EXPORT TIM8_UP_IRQHandler [WEAK]
EXPORT TIM8_TRG_COM_IRQHandler [WEAK]
EXPORT TIM8_CC_IRQHandler [WEAK]
EXPORT ADC3_IRQHandler [WEAK]
EXPORT FMC_IRQHandler [WEAK]
EXPORT SDMMC1_IRQHandler [WEAK]
EXPORT TIM5_IRQHandler [WEAK]
EXPORT SPI3_IRQHandler [WEAK]
EXPORT UART4_IRQHandler [WEAK]
EXPORT UART5_IRQHandler [WEAK]
EXPORT TIM6_DAC_IRQHandler [WEAK]
EXPORT TIM7_IRQHandler [WEAK]
EXPORT DMA2_Channel1_IRQHandler [WEAK]
EXPORT DMA2_Channel2_IRQHandler [WEAK]
EXPORT DMA2_Channel3_IRQHandler [WEAK]
EXPORT DMA2_Channel4_IRQHandler [WEAK]
EXPORT DMA2_Channel5_IRQHandler [WEAK]
EXPORT DFSDM1_FLT0_IRQHandler [WEAK]
EXPORT DFSDM1_FLT1_IRQHandler [WEAK]
EXPORT DFSDM1_FLT2_IRQHandler [WEAK]
EXPORT COMP_IRQHandler [WEAK]
EXPORT LPTIM1_IRQHandler [WEAK]
EXPORT LPTIM2_IRQHandler [WEAK]
EXPORT OTG_FS_IRQHandler [WEAK]
EXPORT DMA2_Channel6_IRQHandler [WEAK]
EXPORT DMA2_Channel7_IRQHandler [WEAK]
EXPORT LPUART1_IRQHandler [WEAK]
EXPORT QUADSPI_IRQHandler [WEAK]
EXPORT I2C3_EV_IRQHandler [WEAK]
EXPORT I2C3_ER_IRQHandler [WEAK]
EXPORT SAI1_IRQHandler [WEAK]
EXPORT SAI2_IRQHandler [WEAK]
EXPORT SWPMI1_IRQHandler [WEAK]
EXPORT TSC_IRQHandler [WEAK]
EXPORT LCD_IRQHandler [WEAK]
EXPORT RNG_IRQHandler [WEAK]
EXPORT FPU_IRQHandler [WEAK]
WWDG_IRQHandler
PVD_PVM_IRQHandler
TAMP_STAMP_IRQHandler
RTC_WKUP_IRQHandler
FLASH_IRQHandler
RCC_IRQHandler
EXTI0_IRQHandler
EXTI1_IRQHandler
EXTI2_IRQHandler
EXTI3_IRQHandler
EXTI4_IRQHandler
DMA1_Channel1_IRQHandler
DMA1_Channel2_IRQHandler
DMA1_Channel3_IRQHandler
DMA1_Channel4_IRQHandler
DMA1_Channel5_IRQHandler
DMA1_Channel6_IRQHandler
DMA1_Channel7_IRQHandler
ADC1_2_IRQHandler
CAN1_TX_IRQHandler
CAN1_RX0_IRQHandler
CAN1_RX1_IRQHandler
CAN1_SCE_IRQHandler
EXTI9_5_IRQHandler
TIM1_BRK_TIM15_IRQHandler
TIM1_UP_TIM16_IRQHandler
TIM1_TRG_COM_TIM17_IRQHandler
TIM1_CC_IRQHandler
TIM2_IRQHandler
TIM3_IRQHandler
TIM4_IRQHandler
I2C1_EV_IRQHandler
I2C1_ER_IRQHandler
I2C2_EV_IRQHandler
I2C2_ER_IRQHandler
SPI1_IRQHandler
SPI2_IRQHandler
USART1_IRQHandler
USART2_IRQHandler
USART3_IRQHandler
EXTI15_10_IRQHandler
RTC_Alarm_IRQHandler
DFSDM1_FLT3_IRQHandler
TIM8_BRK_IRQHandler
TIM8_UP_IRQHandler
TIM8_TRG_COM_IRQHandler
TIM8_CC_IRQHandler
ADC3_IRQHandler
FMC_IRQHandler
SDMMC1_IRQHandler
TIM5_IRQHandler
SPI3_IRQHandler
UART4_IRQHandler
UART5_IRQHandler
TIM6_DAC_IRQHandler
TIM7_IRQHandler
DMA2_Channel1_IRQHandler
DMA2_Channel2_IRQHandler
DMA2_Channel3_IRQHandler
DMA2_Channel4_IRQHandler
DMA2_Channel5_IRQHandler
DFSDM1_FLT0_IRQHandler
DFSDM1_FLT1_IRQHandler
DFSDM1_FLT2_IRQHandler
COMP_IRQHandler
LPTIM1_IRQHandler
LPTIM2_IRQHandler
OTG_FS_IRQHandler
DMA2_Channel6_IRQHandler
DMA2_Channel7_IRQHandler
LPUART1_IRQHandler
QUADSPI_IRQHandler
I2C3_EV_IRQHandler
I2C3_ER_IRQHandler
SAI1_IRQHandler
SAI2_IRQHandler
SWPMI1_IRQHandler
TSC_IRQHandler
LCD_IRQHandler
RNG_IRQHandler
FPU_IRQHandler
B .
ENDP
ALIGN
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****

57
targets/TARGET_STM/TARGET_STM32L4/TARGET_MTS_DRAGONFLY_L471QG/device/TOOLCHAIN_ARM_STD/stm32l476xx.sct Normal file
View File

@ -0,0 +1,57 @@
#! armcc -E
; Scatter-Loading Description File
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Copyright (c) 2015, STMicroelectronics
; All rights reserved.
;
; Redistribution and use in source and binary forms, with or without
; modification, are permitted provided that the following conditions are met:
;
; 1. Redistributions of source code must retain the above copyright notice,
; this list of conditions and the following disclaimer.
; 2. Redistributions in binary form must reproduce the above copyright notice,
; this list of conditions and the following disclaimer in the documentation
; and/or other materials provided with the distribution.
; 3. Neither the name of STMicroelectronics nor the names of its contributors
; may be used to endorse or promote products derived from this software
; without specific prior written permission.
;
; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
; DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
; SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
; CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
; OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
#if !defined(MBED_APP_START)
#define MBED_APP_START 0x08000000
#endif
#if !defined(MBED_APP_SIZE)
#define MBED_APP_SIZE 0x100000
#endif
; 1MB FLASH (0x100000) + 128KB SRAM (0x20000)
LR_IROM1 MBED_APP_START MBED_APP_SIZE { ; load region size_region
ER_IROM1 MBED_APP_START MBED_APP_SIZE { ; load address = execution address
*.o (RESET, +First)
*(InRoot$$Sections)
.ANY (+RO)
}
RW_IRAM1 0x20000000 0x00018000 { ; RW data 96k L4-SRAM1
.ANY (+RW +ZI)
}
; Total: 98 vectors = 392 bytes (0x188) to be reserved in RAM
RW_IRAM2 (0x10000000+0x188) (0x08000-0x188) { ; RW data 32k L4-ECC-SRAM2 retained in standby
.ANY (+RW +ZI)
}
}

56
targets/TARGET_STM/TARGET_STM32L4/TARGET_MTS_DRAGONFLY_L471QG/device/TOOLCHAIN_ARM_STD/sys.cpp Executable file
View File

@ -0,0 +1,56 @@
/* mbed Microcontroller Library - stackheap
* Setup a fixed single stack/heap memory model,
* between the top of the RW/ZI region and the stackpointer
*******************************************************************************
* Copyright (c) 2014, STMicroelectronics
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************
*/
#ifdef __cplusplus
extern "C" {
#endif
#include <rt_misc.h>
#include <stdint.h>
extern char Image$$RW_IRAM1$$ZI$$Limit[];
extern __value_in_regs struct __initial_stackheap __user_setup_stackheap(uint32_t R0, uint32_t R1, uint32_t R2, uint32_t R3) {
uint32_t zi_limit = (uint32_t)Image$$RW_IRAM1$$ZI$$Limit;
uint32_t sp_limit = __current_sp();
zi_limit = (zi_limit + 7) & ~0x7; // ensure zi_limit is 8-byte aligned
struct __initial_stackheap r;
r.heap_base = zi_limit;
r.heap_limit = sp_limit;
return r;
}
#ifdef __cplusplus
}
#endif

162
targets/TARGET_STM/TARGET_STM32L4/TARGET_MTS_DRAGONFLY_L471QG/device/TOOLCHAIN_GCC_ARM/STM32L476XX.ld Normal file
View File

@ -0,0 +1,162 @@
#if !defined(MBED_APP_START)
#define MBED_APP_START 0x08000000
#endif
#if !defined(MBED_APP_SIZE)
#define MBED_APP_SIZE 1024k
#endif
/* Linker script to configure memory regions. */
MEMORY
{
FLASH (rx) : ORIGIN = MBED_APP_START, LENGTH = MBED_APP_SIZE
SRAM2 (rwx) : ORIGIN = 0x10000188, LENGTH = 32k - 0x188
SRAM1 (rwx) : ORIGIN = 0x20000000, LENGTH = 96k
}
/* Linker script to place sections and symbol values. Should be used together
* with other linker script that defines memory regions FLASH and RAM.
* It references following symbols, which must be defined in code:
* Reset_Handler : Entry of reset handler
*
* It defines following symbols, which code can use without definition:
* __exidx_start
* __exidx_end
* __etext
* __data_start__
* __preinit_array_start
* __preinit_array_end
* __init_array_start
* __init_array_end
* __fini_array_start
* __fini_array_end
* __data_end__
* __bss_start__
* __bss_end__
* __end__
* end
* __HeapLimit
* __StackLimit
* __StackTop
* __stack
* _estack
*/
ENTRY(Reset_Handler)
SECTIONS
{
.text :
{
KEEP(*(.isr_vector))
*(.text*)
KEEP(*(.init))
KEEP(*(.fini))
/* .ctors */
*crtbegin.o(.ctors)
*crtbegin?.o(.ctors)
*(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
*(SORT(.ctors.*))
*(.ctors)
/* .dtors */
*crtbegin.o(.dtors)
*crtbegin?.o(.dtors)
*(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
*(SORT(.dtors.*))
*(.dtors)
*(.rodata*)
KEEP(*(.eh_frame*))
} > FLASH
.ARM.extab :
{
*(.ARM.extab* .gnu.linkonce.armextab.*)
} > FLASH
__exidx_start = .;
.ARM.exidx :
{
*(.ARM.exidx* .gnu.linkonce.armexidx.*)
} > FLASH
__exidx_end = .;
__etext = .;
_sidata = .;
.data : AT (__etext)
{
__data_start__ = .;
_sdata = .;
*(vtable)
*(.data*)
. = ALIGN(4);
/* preinit data */
PROVIDE_HIDDEN (__preinit_array_start = .);
KEEP(*(.preinit_array))
PROVIDE_HIDDEN (__preinit_array_end = .);
. = ALIGN(4);
/* init data */
PROVIDE_HIDDEN (__init_array_start = .);
KEEP(*(SORT(.init_array.*)))
KEEP(*(.init_array))
PROVIDE_HIDDEN (__init_array_end = .);
. = ALIGN(4);
/* finit data */
PROVIDE_HIDDEN (__fini_array_start = .);
KEEP(*(SORT(.fini_array.*)))
KEEP(*(.fini_array))
PROVIDE_HIDDEN (__fini_array_end = .);
KEEP(*(.jcr*))
. = ALIGN(4);
/* All data end */
__data_end__ = .;
_edata = .;
} > SRAM1
.bss :
{
. = ALIGN(4);
__bss_start__ = .;
_sbss = .;
*(.bss*)
*(COMMON)
. = ALIGN(4);
__bss_end__ = .;
_ebss = .;
} > SRAM1
.heap (COPY):
{
__end__ = .;
end = __end__;
*(.heap*)
__HeapLimit = .;
} > SRAM1
/* .stack_dummy section doesn't contains any symbols. It is only
* used for linker to calculate size of stack sections, and assign
* values to stack symbols later */
.stack_dummy (COPY):
{
*(.stack*)
} > SRAM1
/* Set stack top to end of RAM, and stack limit move down by
* size of stack_dummy section */
__StackTop = ORIGIN(SRAM1) + LENGTH(SRAM1);
_estack = __StackTop;
__StackLimit = __StackTop - SIZEOF(.stack_dummy);
PROVIDE(__stack = __StackTop);
/* Check if data + heap + stack exceeds RAM limit */
ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")
}

513
targets/TARGET_STM/TARGET_STM32L4/TARGET_MTS_DRAGONFLY_L471QG/device/TOOLCHAIN_GCC_ARM/startup_stm32l476xx.S Normal file
View File

@ -0,0 +1,513 @@
/**
******************************************************************************
* @file startup_stm32l476xx.s
* @author MCD Application Team
* @version V1.1.1
* @date 29-April-2016
* @brief STM32L476xx devices vector table GCC toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address,
* - Configure the clock system
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M4 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
.syntax unified
.cpu cortex-m4
.fpu softvfp
.thumb
.global g_pfnVectors
.global Default_Handler
/* start address for the initialization values of the .data section.
defined in linker script */
.word _sidata
/* start address for the .data section. defined in linker script */
.word _sdata
/* end address for the .data section. defined in linker script */
.word _edata
.equ BootRAM, 0xF1E0F85F
/**
* @brief This is the code that gets called when the processor first
* starts execution following a reset event. Only the absolutely
* necessary set is performed, after which the application
* supplied main() routine is called.
* @param None
* @retval : None
*/
.section .text.Reset_Handler
.weak Reset_Handler
.type Reset_Handler, %function
Reset_Handler:
ldr sp, =_estack /* Atollic update: set stack pointer */
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
CopyDataInit:
ldr r3, =_sidata
ldr r3, [r3, r1]
str r3, [r0, r1]
adds r1, r1, #4
LoopCopyDataInit:
ldr r0, =_sdata
ldr r3, =_edata
adds r2, r0, r1
cmp r2, r3
bcc CopyDataInit
/* Call the clock system intitialization function.*/
bl SystemInit
/* Call static constructors */
//bl __libc_init_array
/* Call the application's entry point.*/
//bl main
// Calling the crt0 'cold-start' entry point. There __libc_init_array is called
// and when existing hardware_init_hook() and software_init_hook() before
// starting main(). software_init_hook() is available and has to be called due
// to initializsation when using rtos.
bl _start
bx lr
.size Reset_Handler, .-Reset_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop, preserving
* the system state for examination by a debugger.
*
* @param None
* @retval : None
*/
.section .text.Default_Handler,"ax",%progbits
Default_Handler:
Infinite_Loop:
b Infinite_Loop
.size Default_Handler, .-Default_Handler
/******************************************************************************
*
* The minimal vector table for a Cortex-M4. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x0000.0000.
*
******************************************************************************/
.section .isr_vector,"a",%progbits
.type g_pfnVectors, %object
.size g_pfnVectors, .-g_pfnVectors
g_pfnVectors:
.word _estack
.word Reset_Handler
.word NMI_Handler
.word HardFault_Handler
.word MemManage_Handler
.word BusFault_Handler
.word UsageFault_Handler
.word 0
.word 0
.word 0
.word 0
.word SVC_Handler
.word DebugMon_Handler
.word 0
.word PendSV_Handler
.word SysTick_Handler
.word WWDG_IRQHandler
.word PVD_PVM_IRQHandler
.word TAMP_STAMP_IRQHandler
.word RTC_WKUP_IRQHandler
.word FLASH_IRQHandler
.word RCC_IRQHandler
.word EXTI0_IRQHandler
.word EXTI1_IRQHandler
.word EXTI2_IRQHandler
.word EXTI3_IRQHandler
.word EXTI4_IRQHandler
.word DMA1_Channel1_IRQHandler
.word DMA1_Channel2_IRQHandler
.word DMA1_Channel3_IRQHandler
.word DMA1_Channel4_IRQHandler
.word DMA1_Channel5_IRQHandler
.word DMA1_Channel6_IRQHandler
.word DMA1_Channel7_IRQHandler
.word ADC1_2_IRQHandler
.word CAN1_TX_IRQHandler
.word CAN1_RX0_IRQHandler
.word CAN1_RX1_IRQHandler
.word CAN1_SCE_IRQHandler
.word EXTI9_5_IRQHandler
.word TIM1_BRK_TIM15_IRQHandler
.word TIM1_UP_TIM16_IRQHandler
.word TIM1_TRG_COM_TIM17_IRQHandler
.word TIM1_CC_IRQHandler
.word TIM2_IRQHandler
.word TIM3_IRQHandler
.word TIM4_IRQHandler
.word I2C1_EV_IRQHandler
.word I2C1_ER_IRQHandler
.word I2C2_EV_IRQHandler
.word I2C2_ER_IRQHandler
.word SPI1_IRQHandler
.word SPI2_IRQHandler
.word USART1_IRQHandler
.word USART2_IRQHandler
.word USART3_IRQHandler
.word EXTI15_10_IRQHandler
.word RTC_Alarm_IRQHandler
.word DFSDM1_FLT3_IRQHandler
.word TIM8_BRK_IRQHandler
.word TIM8_UP_IRQHandler
.word TIM8_TRG_COM_IRQHandler
.word TIM8_CC_IRQHandler
.word ADC3_IRQHandler
.word FMC_IRQHandler
.word SDMMC1_IRQHandler
.word TIM5_IRQHandler
.word SPI3_IRQHandler
.word UART4_IRQHandler
.word UART5_IRQHandler
.word TIM6_DAC_IRQHandler
.word TIM7_IRQHandler
.word DMA2_Channel1_IRQHandler
.word DMA2_Channel2_IRQHandler
.word DMA2_Channel3_IRQHandler
.word DMA2_Channel4_IRQHandler
.word DMA2_Channel5_IRQHandler
.word DFSDM1_FLT0_IRQHandler
.word DFSDM1_FLT1_IRQHandler
.word DFSDM1_FLT2_IRQHandler
.word COMP_IRQHandler
.word LPTIM1_IRQHandler
.word LPTIM2_IRQHandler
.word OTG_FS_IRQHandler
.word DMA2_Channel6_IRQHandler
.word DMA2_Channel7_IRQHandler
.word LPUART1_IRQHandler
.word QUADSPI_IRQHandler
.word I2C3_EV_IRQHandler
.word I2C3_ER_IRQHandler
.word SAI1_IRQHandler
.word SAI2_IRQHandler
.word SWPMI1_IRQHandler
.word TSC_IRQHandler
.word LCD_IRQHandler
.word 0
.word RNG_IRQHandler
.word FPU_IRQHandler
/*******************************************************************************
*
* Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*
*******************************************************************************/
.weak NMI_Handler
.thumb_set NMI_Handler,Default_Handler
.weak HardFault_Handler
.thumb_set HardFault_Handler,Default_Handler
.weak MemManage_Handler
.thumb_set MemManage_Handler,Default_Handler
.weak BusFault_Handler
.thumb_set BusFault_Handler,Default_Handler
.weak UsageFault_Handler
.thumb_set UsageFault_Handler,Default_Handler
.weak SVC_Handler
.thumb_set SVC_Handler,Default_Handler
.weak DebugMon_Handler
.thumb_set DebugMon_Handler,Default_Handler
.weak PendSV_Handler
.thumb_set PendSV_Handler,Default_Handler
.weak SysTick_Handler
.thumb_set SysTick_Handler,Default_Handler
.weak WWDG_IRQHandler
.thumb_set WWDG_IRQHandler,Default_Handler
.weak PVD_PVM_IRQHandler
.thumb_set PVD_PVM_IRQHandler,Default_Handler
.weak TAMP_STAMP_IRQHandler
.thumb_set TAMP_STAMP_IRQHandler,Default_Handler
.weak RTC_WKUP_IRQHandler
.thumb_set RTC_WKUP_IRQHandler,Default_Handler
.weak FLASH_IRQHandler
.thumb_set FLASH_IRQHandler,Default_Handler
.weak RCC_IRQHandler
.thumb_set RCC_IRQHandler,Default_Handler
.weak EXTI0_IRQHandler
.thumb_set EXTI0_IRQHandler,Default_Handler
.weak EXTI1_IRQHandler
.thumb_set EXTI1_IRQHandler,Default_Handler
.weak EXTI2_IRQHandler
.thumb_set EXTI2_IRQHandler,Default_Handler
.weak EXTI3_IRQHandler
.thumb_set EXTI3_IRQHandler,Default_Handler
.weak EXTI4_IRQHandler
.thumb_set EXTI4_IRQHandler,Default_Handler
.weak DMA1_Channel1_IRQHandler
.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
.weak DMA1_Channel2_IRQHandler
.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
.weak DMA1_Channel3_IRQHandler
.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
.weak DMA1_Channel4_IRQHandler
.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
.weak DMA1_Channel5_IRQHandler
.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
.weak DMA1_Channel6_IRQHandler
.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
.weak DMA1_Channel7_IRQHandler
.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
.weak ADC1_2_IRQHandler
.thumb_set ADC1_2_IRQHandler,Default_Handler
.weak CAN1_TX_IRQHandler
.thumb_set CAN1_TX_IRQHandler,Default_Handler
.weak CAN1_RX0_IRQHandler
.thumb_set CAN1_RX0_IRQHandler,Default_Handler
.weak CAN1_RX1_IRQHandler
.thumb_set CAN1_RX1_IRQHandler,Default_Handler
.weak CAN1_SCE_IRQHandler
.thumb_set CAN1_SCE_IRQHandler,Default_Handler
.weak EXTI9_5_IRQHandler
.thumb_set EXTI9_5_IRQHandler,Default_Handler
.weak TIM1_BRK_TIM15_IRQHandler
.thumb_set TIM1_BRK_TIM15_IRQHandler,Default_Handler
.weak TIM1_UP_TIM16_IRQHandler
.thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler
.weak TIM1_TRG_COM_TIM17_IRQHandler
.thumb_set TIM1_TRG_COM_TIM17_IRQHandler,Default_Handler
.weak TIM1_CC_IRQHandler
.thumb_set TIM1_CC_IRQHandler,Default_Handler
.weak TIM2_IRQHandler
.thumb_set TIM2_IRQHandler,Default_Handler
.weak TIM3_IRQHandler
.thumb_set TIM3_IRQHandler,Default_Handler
.weak TIM4_IRQHandler
.thumb_set TIM4_IRQHandler,Default_Handler
.weak I2C1_EV_IRQHandler
.thumb_set I2C1_EV_IRQHandler,Default_Handler
.weak I2C1_ER_IRQHandler
.thumb_set I2C1_ER_IRQHandler,Default_Handler
.weak I2C2_EV_IRQHandler
.thumb_set I2C2_EV_IRQHandler,Default_Handler
.weak I2C2_ER_IRQHandler
.thumb_set I2C2_ER_IRQHandler,Default_Handler
.weak SPI1_IRQHandler
.thumb_set SPI1_IRQHandler,Default_Handler
.weak SPI2_IRQHandler
.thumb_set SPI2_IRQHandler,Default_Handler
.weak USART1_IRQHandler
.thumb_set USART1_IRQHandler,Default_Handler
.weak USART2_IRQHandler
.thumb_set USART2_IRQHandler,Default_Handler
.weak USART3_IRQHandler
.thumb_set USART3_IRQHandler,Default_Handler
.weak EXTI15_10_IRQHandler
.thumb_set EXTI15_10_IRQHandler,Default_Handler
.weak RTC_Alarm_IRQHandler
.thumb_set RTC_Alarm_IRQHandler,Default_Handler
.weak DFSDM1_FLT3_IRQHandler
.thumb_set DFSDM1_FLT3_IRQHandler,Default_Handler
.weak TIM8_BRK_IRQHandler
.thumb_set TIM8_BRK_IRQHandler,Default_Handler
.weak TIM8_UP_IRQHandler
.thumb_set TIM8_UP_IRQHandler,Default_Handler
.weak TIM8_TRG_COM_IRQHandler
.thumb_set TIM8_TRG_COM_IRQHandler,Default_Handler
.weak TIM8_CC_IRQHandler
.thumb_set TIM8_CC_IRQHandler,Default_Handler
.weak ADC3_IRQHandler
.thumb_set ADC3_IRQHandler,Default_Handler
.weak FMC_IRQHandler
.thumb_set FMC_IRQHandler,Default_Handler
.weak SDMMC1_IRQHandler
.thumb_set SDMMC1_IRQHandler,Default_Handler
.weak TIM5_IRQHandler
.thumb_set TIM5_IRQHandler,Default_Handler
.weak SPI3_IRQHandler
.thumb_set SPI3_IRQHandler,Default_Handler
.weak UART4_IRQHandler
.thumb_set UART4_IRQHandler,Default_Handler
.weak UART5_IRQHandler
.thumb_set UART5_IRQHandler,Default_Handler
.weak TIM6_DAC_IRQHandler
.thumb_set TIM6_DAC_IRQHandler,Default_Handler
.weak TIM7_IRQHandler
.thumb_set TIM7_IRQHandler,Default_Handler
.weak DMA2_Channel1_IRQHandler
.thumb_set DMA2_Channel1_IRQHandler,Default_Handler
.weak DMA2_Channel2_IRQHandler
.thumb_set DMA2_Channel2_IRQHandler,Default_Handler
.weak DMA2_Channel3_IRQHandler
.thumb_set DMA2_Channel3_IRQHandler,Default_Handler
.weak DMA2_Channel4_IRQHandler
.thumb_set DMA2_Channel4_IRQHandler,Default_Handler
.weak DMA2_Channel5_IRQHandler
.thumb_set DMA2_Channel5_IRQHandler,Default_Handler
.weak DFSDM1_FLT0_IRQHandler
.thumb_set DFSDM1_FLT0_IRQHandler,Default_Handler
.weak DFSDM1_FLT1_IRQHandler
.thumb_set DFSDM1_FLT1_IRQHandler,Default_Handler
.weak DFSDM1_FLT2_IRQHandler
.thumb_set DFSDM1_FLT2_IRQHandler,Default_Handler
.weak COMP_IRQHandler
.thumb_set COMP_IRQHandler,Default_Handler
.weak LPTIM1_IRQHandler
.thumb_set LPTIM1_IRQHandler,Default_Handler
.weak LPTIM2_IRQHandler
.thumb_set LPTIM2_IRQHandler,Default_Handler
.weak OTG_FS_IRQHandler
.thumb_set OTG_FS_IRQHandler,Default_Handler
.weak DMA2_Channel6_IRQHandler
.thumb_set DMA2_Channel6_IRQHandler,Default_Handler
.weak DMA2_Channel7_IRQHandler
.thumb_set DMA2_Channel7_IRQHandler,Default_Handler
.weak LPUART1_IRQHandler
.thumb_set LPUART1_IRQHandler,Default_Handler
.weak QUADSPI_IRQHandler
.thumb_set QUADSPI_IRQHandler,Default_Handler
.weak I2C3_EV_IRQHandler
.thumb_set I2C3_EV_IRQHandler,Default_Handler
.weak I2C3_ER_IRQHandler
.thumb_set I2C3_ER_IRQHandler,Default_Handler
.weak SAI1_IRQHandler
.thumb_set SAI1_IRQHandler,Default_Handler
.weak SAI2_IRQHandler
.thumb_set SAI2_IRQHandler,Default_Handler
.weak SWPMI1_IRQHandler
.thumb_set SWPMI1_IRQHandler,Default_Handler
.weak TSC_IRQHandler
.thumb_set TSC_IRQHandler,Default_Handler
.weak LCD_IRQHandler
.thumb_set LCD_IRQHandler,Default_Handler
.weak RNG_IRQHandler
.thumb_set RNG_IRQHandler,Default_Handler
.weak FPU_IRQHandler
.thumb_set FPU_IRQHandler,Default_Handler
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

637
targets/TARGET_STM/TARGET_STM32L4/TARGET_MTS_DRAGONFLY_L471QG/device/TOOLCHAIN_IAR/startup_stm32l476xx.S Normal file
View File

@ -0,0 +1,637 @@
;/********************* COPYRIGHT(c) 2016 STMicroelectronics ********************
;* File Name : startup_stm32l476xx.s
;* Author : MCD Application Team
;* Version : V1.1.1
;* Date : 29-April-2016
;* Description : STM32L476xx Ultra Low Power Devices vector
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == _iar_program_start,
;* - Set the vector table entries with the exceptions ISR
;* address.
;* - Branches to main in the C library (which eventually
;* calls main()).
;* After Reset the Cortex-M4 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;********************************************************************************
;*
;* Redistribution and use in source and binary forms, with or without modification,
;* are permitted provided that the following conditions are met:
;* 1. Redistributions of source code must retain the above copyright notice,
;* this list of conditions and the following disclaimer.
;* 2. Redistributions in binary form must reproduce the above copyright notice,
;* this list of conditions and the following disclaimer in the documentation
;* and/or other materials provided with the distribution.
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
;* may be used to endorse or promote products derived from this software
;* without specific prior written permission.
;*
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;*
;*******************************************************************************
;
;
; The modules in this file are included in the libraries, and may be replaced
; by any user-defined modules that define the PUBLIC symbol _program_start or
; a user defined start symbol.
; To override the cstartup defined in the library, simply add your modified
; version to the workbench project.
;
; The vector table is normally located at address 0.
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
; The name "__vector_table" has special meaning for C-SPY:
; it is where the SP start value is found, and the NVIC vector
; table register (VTOR) is initialized to this address if != 0.
;
; Cortex-M version
;
MODULE ?cstartup
;; Forward declaration of sections.
SECTION CSTACK:DATA:NOROOT(3)
SECTION .intvec:CODE:NOROOT(2)
EXTERN __iar_program_start
EXTERN SystemInit
PUBLIC __vector_table
DATA
__vector_table
DCD sfe(CSTACK)
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD MemManage_Handler ; MPU Fault Handler
DCD BusFault_Handler ; Bus Fault Handler
DCD UsageFault_Handler ; Usage Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD DebugMon_Handler ; Debug Monitor Handler
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window WatchDog
DCD PVD_PVM_IRQHandler ; PVD/PVM1/PVM2/PVM3/PVM4 through EXTI Line detection
DCD TAMP_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line
DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_IRQHandler ; RCC
DCD EXTI0_IRQHandler ; EXTI Line0
DCD EXTI1_IRQHandler ; EXTI Line1
DCD EXTI2_IRQHandler ; EXTI Line2
DCD EXTI3_IRQHandler ; EXTI Line3
DCD EXTI4_IRQHandler ; EXTI Line4
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
DCD ADC1_2_IRQHandler ; ADC1, ADC2
DCD CAN1_TX_IRQHandler ; CAN1 TX
DCD CAN1_RX0_IRQHandler ; CAN1 RX0
DCD CAN1_RX1_IRQHandler ; CAN1 RX1
DCD CAN1_SCE_IRQHandler ; CAN1 SCE
DCD EXTI9_5_IRQHandler ; External Line[9:5]s
DCD TIM1_BRK_TIM15_IRQHandler ; TIM1 Break and TIM15
DCD TIM1_UP_TIM16_IRQHandler ; TIM1 Update and TIM16
DCD TIM1_TRG_COM_TIM17_IRQHandler ; TIM1 Trigger and Commutation and TIM17
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM4_IRQHandler ; TIM4
DCD I2C1_EV_IRQHandler ; I2C1 Event
DCD I2C1_ER_IRQHandler ; I2C1 Error
DCD I2C2_EV_IRQHandler ; I2C2 Event
DCD I2C2_ER_IRQHandler ; I2C2 Error
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_IRQHandler ; USART3
DCD EXTI15_10_IRQHandler ; External Line[15:10]
DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line
DCD DFSDM1_FLT3_IRQHandler ; DFSDM1 Filter 3 global Interrupt
DCD TIM8_BRK_IRQHandler ; TIM8 Break Interrupt
DCD TIM8_UP_IRQHandler ; TIM8 Update Interrupt
DCD TIM8_TRG_COM_IRQHandler ; TIM8 Trigger and Commutation Interrupt
DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare Interrupt
DCD ADC3_IRQHandler ; ADC3 global Interrupt
DCD FMC_IRQHandler ; FMC
DCD SDMMC1_IRQHandler ; SDMMC1
DCD TIM5_IRQHandler ; TIM5
DCD SPI3_IRQHandler ; SPI3
DCD UART4_IRQHandler ; UART4
DCD UART5_IRQHandler ; UART5
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC1&2 underrun errors
DCD TIM7_IRQHandler ; TIM7
DCD DMA2_Channel1_IRQHandler ; DMA2 Channel 1
DCD DMA2_Channel2_IRQHandler ; DMA2 Channel 2
DCD DMA2_Channel3_IRQHandler ; DMA2 Channel 3
DCD DMA2_Channel4_IRQHandler ; DMA2 Channel 4
DCD DMA2_Channel5_IRQHandler ; DMA2 Channel 5
DCD DFSDM1_FLT0_IRQHandler ; DFSDM1 Filter 0 global Interrupt
DCD DFSDM1_FLT1_IRQHandler ; DFSDM1 Filter 1 global Interrupt
DCD DFSDM1_FLT2_IRQHandler ; DFSDM1 Filter 2 global Interrupt
DCD COMP_IRQHandler ; COMP Interrupt
DCD LPTIM1_IRQHandler ; LP TIM1 interrupt
DCD LPTIM2_IRQHandler ; LP TIM2 interrupt
DCD OTG_FS_IRQHandler ; USB OTG FS
DCD DMA2_Channel6_IRQHandler ; DMA2 Channel 6
DCD DMA2_Channel7_IRQHandler ; DMA2 Channel 7
DCD LPUART1_IRQHandler ; LP UART 1 interrupt
DCD QUADSPI_IRQHandler ; Quad SPI global interrupt
DCD I2C3_EV_IRQHandler ; I2C3 event
DCD I2C3_ER_IRQHandler ; I2C3 error
DCD SAI1_IRQHandler ; Serial Audio Interface 1 global interrupt
DCD SAI2_IRQHandler ; Serial Audio Interface 2 global interrupt
DCD SWPMI1_IRQHandler ; Serial Wire Interface global interrupt
DCD TSC_IRQHandler ; Touch Sense Controller global interrupt
DCD LCD_IRQHandler ; LCD global interrupt
DCD 0 ; Reserved
DCD RNG_IRQHandler ; RNG global interrupt
DCD FPU_IRQHandler ; FPU
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Default interrupt handlers.
;;
THUMB
PUBWEAK Reset_Handler
SECTION .text:CODE:NOROOT:REORDER(2)
Reset_Handler
LDR R0, =SystemInit
BLX R0
LDR R0, =__iar_program_start
BX R0
PUBWEAK NMI_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
NMI_Handler
B NMI_Handler
PUBWEAK HardFault_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
HardFault_Handler
B HardFault_Handler
PUBWEAK MemManage_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
MemManage_Handler
B MemManage_Handler
PUBWEAK BusFault_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
BusFault_Handler
B BusFault_Handler
PUBWEAK UsageFault_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
UsageFault_Handler
B UsageFault_Handler
PUBWEAK SVC_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
SVC_Handler
B SVC_Handler
PUBWEAK DebugMon_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
DebugMon_Handler
B DebugMon_Handler
PUBWEAK PendSV_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
PendSV_Handler
B PendSV_Handler
PUBWEAK SysTick_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
SysTick_Handler
B SysTick_Handler
PUBWEAK WWDG_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
WWDG_IRQHandler
B WWDG_IRQHandler
PUBWEAK PVD_PVM_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
PVD_PVM_IRQHandler
B PVD_PVM_IRQHandler
PUBWEAK TAMP_STAMP_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TAMP_STAMP_IRQHandler
B TAMP_STAMP_IRQHandler
PUBWEAK RTC_WKUP_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
RTC_WKUP_IRQHandler
B RTC_WKUP_IRQHandler
PUBWEAK FLASH_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
FLASH_IRQHandler
B FLASH_IRQHandler
PUBWEAK RCC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
RCC_IRQHandler
B RCC_IRQHandler
PUBWEAK EXTI0_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI0_IRQHandler
B EXTI0_IRQHandler
PUBWEAK EXTI1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI1_IRQHandler
B EXTI1_IRQHandler
PUBWEAK EXTI2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI2_IRQHandler
B EXTI2_IRQHandler
PUBWEAK EXTI3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI3_IRQHandler
B EXTI3_IRQHandler
PUBWEAK EXTI4_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI4_IRQHandler
B EXTI4_IRQHandler
PUBWEAK DMA1_Channel1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Channel1_IRQHandler
B DMA1_Channel1_IRQHandler
PUBWEAK DMA1_Channel2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Channel2_IRQHandler
B DMA1_Channel2_IRQHandler
PUBWEAK DMA1_Channel3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Channel3_IRQHandler
B DMA1_Channel3_IRQHandler
PUBWEAK DMA1_Channel4_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Channel4_IRQHandler
B DMA1_Channel4_IRQHandler
PUBWEAK DMA1_Channel5_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Channel5_IRQHandler
B DMA1_Channel5_IRQHandler
PUBWEAK DMA1_Channel6_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Channel6_IRQHandler
B DMA1_Channel6_IRQHandler
PUBWEAK DMA1_Channel7_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA1_Channel7_IRQHandler
B DMA1_Channel7_IRQHandler
PUBWEAK ADC1_2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
ADC1_2_IRQHandler
B ADC1_2_IRQHandler
PUBWEAK CAN1_TX_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
CAN1_TX_IRQHandler
B CAN1_TX_IRQHandler
PUBWEAK CAN1_RX0_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
CAN1_RX0_IRQHandler
B CAN1_RX0_IRQHandler
PUBWEAK CAN1_RX1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
CAN1_RX1_IRQHandler
B CAN1_RX1_IRQHandler
PUBWEAK CAN1_SCE_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
CAN1_SCE_IRQHandler
B CAN1_SCE_IRQHandler
PUBWEAK EXTI9_5_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI9_5_IRQHandler
B EXTI9_5_IRQHandler
PUBWEAK TIM1_BRK_TIM15_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM1_BRK_TIM15_IRQHandler
B TIM1_BRK_TIM15_IRQHandler
PUBWEAK TIM1_UP_TIM16_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM1_UP_TIM16_IRQHandler
B TIM1_UP_TIM16_IRQHandler
PUBWEAK TIM1_TRG_COM_TIM17_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM1_TRG_COM_TIM17_IRQHandler
B TIM1_TRG_COM_TIM17_IRQHandler
PUBWEAK TIM1_CC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM1_CC_IRQHandler
B TIM1_CC_IRQHandler
PUBWEAK TIM2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM2_IRQHandler
B TIM2_IRQHandler
PUBWEAK TIM3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM3_IRQHandler
B TIM3_IRQHandler
PUBWEAK TIM4_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM4_IRQHandler
B TIM4_IRQHandler
PUBWEAK I2C1_EV_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
I2C1_EV_IRQHandler
B I2C1_EV_IRQHandler
PUBWEAK I2C1_ER_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
I2C1_ER_IRQHandler
B I2C1_ER_IRQHandler
PUBWEAK I2C2_EV_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
I2C2_EV_IRQHandler
B I2C2_EV_IRQHandler
PUBWEAK I2C2_ER_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
I2C2_ER_IRQHandler
B I2C2_ER_IRQHandler
PUBWEAK SPI1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
SPI1_IRQHandler
B SPI1_IRQHandler
PUBWEAK SPI2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
SPI2_IRQHandler
B SPI2_IRQHandler
PUBWEAK USART1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART1_IRQHandler
B USART1_IRQHandler
PUBWEAK USART2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART2_IRQHandler
B USART2_IRQHandler
PUBWEAK USART3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
USART3_IRQHandler
B USART3_IRQHandler
PUBWEAK EXTI15_10_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
EXTI15_10_IRQHandler
B EXTI15_10_IRQHandler
PUBWEAK RTC_Alarm_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
RTC_Alarm_IRQHandler
B RTC_Alarm_IRQHandler
PUBWEAK DFSDM1_FLT3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DFSDM1_FLT3_IRQHandler
B DFSDM1_FLT3_IRQHandler
PUBWEAK TIM8_BRK_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM8_BRK_IRQHandler
B TIM8_BRK_IRQHandler
PUBWEAK TIM8_UP_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM8_UP_IRQHandler
B TIM8_UP_IRQHandler
PUBWEAK TIM8_TRG_COM_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM8_TRG_COM_IRQHandler
B TIM8_TRG_COM_IRQHandler
PUBWEAK TIM8_CC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM8_CC_IRQHandler
B TIM8_CC_IRQHandler
PUBWEAK ADC3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
ADC3_IRQHandler
B ADC3_IRQHandler
PUBWEAK FMC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
FMC_IRQHandler
B FMC_IRQHandler
PUBWEAK SDMMC1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
SDMMC1_IRQHandler
B SDMMC1_IRQHandler
PUBWEAK TIM5_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM5_IRQHandler
B TIM5_IRQHandler
PUBWEAK SPI3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
SPI3_IRQHandler
B SPI3_IRQHandler
PUBWEAK UART4_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
UART4_IRQHandler
B UART4_IRQHandler
PUBWEAK UART5_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
UART5_IRQHandler
B UART5_IRQHandler
PUBWEAK TIM6_DAC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM6_DAC_IRQHandler
B TIM6_DAC_IRQHandler
PUBWEAK TIM7_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TIM7_IRQHandler
B TIM7_IRQHandler
PUBWEAK DMA2_Channel1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA2_Channel1_IRQHandler
B DMA2_Channel1_IRQHandler
PUBWEAK DMA2_Channel2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA2_Channel2_IRQHandler
B DMA2_Channel2_IRQHandler
PUBWEAK DMA2_Channel3_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA2_Channel3_IRQHandler
B DMA2_Channel3_IRQHandler
PUBWEAK DMA2_Channel4_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA2_Channel4_IRQHandler
B DMA2_Channel4_IRQHandler
PUBWEAK DMA2_Channel5_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA2_Channel5_IRQHandler
B DMA2_Channel5_IRQHandler
PUBWEAK DFSDM1_FLT0_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DFSDM1_FLT0_IRQHandler
B DFSDM1_FLT0_IRQHandler
PUBWEAK DFSDM1_FLT1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DFSDM1_FLT1_IRQHandler
B DFSDM1_FLT1_IRQHandler
PUBWEAK DFSDM1_FLT2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DFSDM1_FLT2_IRQHandler
B DFSDM1_FLT2_IRQHandler
PUBWEAK COMP_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
COMP_IRQHandler
B COMP_IRQHandler
PUBWEAK LPTIM1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
LPTIM1_IRQHandler
B LPTIM1_IRQHandler
PUBWEAK LPTIM2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
LPTIM2_IRQHandler
B LPTIM2_IRQHandler
PUBWEAK OTG_FS_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
OTG_FS_IRQHandler
B OTG_FS_IRQHandler
PUBWEAK DMA2_Channel6_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA2_Channel6_IRQHandler
B DMA2_Channel6_IRQHandler
PUBWEAK DMA2_Channel7_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
DMA2_Channel7_IRQHandler
B DMA2_Channel7_IRQHandler
PUBWEAK LPUART1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
LPUART1_IRQHandler
B LPUART1_IRQHandler
PUBWEAK QUADSPI_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
QUADSPI_IRQHandler
B QUADSPI_IRQHandler
PUBWEAK I2C3_EV_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
I2C3_EV_IRQHandler
B I2C3_EV_IRQHandler
PUBWEAK I2C3_ER_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
I2C3_ER_IRQHandler
B I2C3_ER_IRQHandler
PUBWEAK SAI1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
SAI1_IRQHandler
B SAI1_IRQHandler
PUBWEAK SAI2_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
SAI2_IRQHandler
B SAI2_IRQHandler
PUBWEAK SWPMI1_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
SWPMI1_IRQHandler
B SWPMI1_IRQHandler
PUBWEAK TSC_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
TSC_IRQHandler
B TSC_IRQHandler
PUBWEAK LCD_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
LCD_IRQHandler
B LCD_IRQHandler
PUBWEAK RNG_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
RNG_IRQHandler
B RNG_IRQHandler
PUBWEAK FPU_IRQHandler
SECTION .text:CODE:NOROOT:REORDER(1)
FPU_IRQHandler
B FPU_IRQHandler
END
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

38
targets/TARGET_STM/TARGET_STM32L4/TARGET_MTS_DRAGONFLY_L471QG/device/TOOLCHAIN_IAR/stm32l476xx.icf Normal file
View File

@ -0,0 +1,38 @@
if (!isdefinedsymbol(MBED_APP_START)) { define symbol MBED_APP_START = 0x08000000; }
if (!isdefinedsymbol(MBED_APP_SIZE)) { define symbol MBED_APP_SIZE = 0x100000; }
/* [ROM = 1024kb = 0x100000] */
define symbol __intvec_start__ = MBED_APP_START;
define symbol __region_ROM_start__ = MBED_APP_START;
define symbol __region_ROM_end__ = MBED_APP_START + MBED_APP_SIZE - 1;
/* [RAM = 96kb + 32kb = 0x20000] */
/* Vector table dynamic copy: Total: 98 vectors = 392 bytes (0x188) to be reserved in RAM */
define symbol __NVIC_start__ = 0x10000000;
define symbol __NVIC_end__ = 0x10000187; /* Aligned on 8 bytes (392 = 49 x 8) */
define symbol __region_SRAM2_start__ = 0x10000188;
define symbol __region_SRAM2_end__ = 0x10007FFF;
define symbol __region_SRAM1_start__ = 0x20000000;
define symbol __region_SRAM1_end__ = 0x20017FFF;
/* Memory regions */
define memory mem with size = 4G;
define region ROM_region = mem:[from __region_ROM_start__ to __region_ROM_end__];
define region SRAM2_region = mem:[from __region_SRAM2_start__ to __region_SRAM2_end__];
define region SRAM1_region = mem:[from __region_SRAM1_start__ to __region_SRAM1_end__];
/* Stack 1/8 and Heap 1/4 of RAM */
define symbol __size_cstack__ = 0x8000;
define symbol __size_heap__ = 0xa000;
define block CSTACK with alignment = 8, size = __size_cstack__ { };
define block HEAP with alignment = 8, size = __size_heap__ { };
define block STACKHEAP with fixed order { block HEAP, block CSTACK };
initialize by copy with packing = zeros { readwrite };
do not initialize { section .noinit };
place at address mem:__intvec_start__ { readonly section .intvec };
place in ROM_region { readonly };
place in SRAM1_region { readwrite, block STACKHEAP };
place in SRAM2_region { };

38
targets/TARGET_STM/TARGET_STM32L4/TARGET_MTS_DRAGONFLY_L471QG/device/cmsis.h Executable file
View File

@ -0,0 +1,38 @@
/* mbed Microcontroller Library
* A generic CMSIS include header
*******************************************************************************
* Copyright (c) 2015, STMicroelectronics
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************
*/
#ifndef MBED_CMSIS_H
#define MBED_CMSIS_H
#include "stm32l4xx.h"
#include "cmsis_nvic.h"
#endif

40
targets/TARGET_STM/TARGET_STM32L4/TARGET_MTS_DRAGONFLY_L471QG/device/cmsis_nvic.h Normal file
View File

@ -0,0 +1,40 @@
/* mbed Microcontroller Library
*******************************************************************************
* Copyright (c) 2015, STMicroelectronics
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************
*/
#ifndef MBED_CMSIS_NVIC_H
#define MBED_CMSIS_NVIC_H
// CORE: 16 vectors = 64 bytes from 0x00 to 0x3F
// MCU Peripherals: 82 vectors = 328 bytes from 0x40 to 0x187
// Total: 98 vectors = 392 bytes (0x188) to be reserved in RAM
#define NVIC_NUM_VECTORS 98
#define NVIC_RAM_VECTOR_ADDRESS 0x10000000 // Vectors positioned at start of SRAM2
#endif

66
targets/TARGET_STM/TARGET_STM32L4/TARGET_MTS_DRAGONFLY_L471QG/device/hal_tick.h Executable file
View File

@ -0,0 +1,66 @@
/**
******************************************************************************
* @file hal_tick.h
* @author MCD Application Team
* @brief Initialization of HAL tick
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
#ifndef __HAL_TICK_H
#define __HAL_TICK_H
#ifdef __cplusplus
extern "C" {
#endif
#include "stm32l4xx.h"
#include "stm32l4xx_ll_tim.h"
#include "cmsis_nvic.h"
#define TIM_MST TIM5
#define TIM_MST_IRQ TIM5_IRQn
#define TIM_MST_RCC __HAL_RCC_TIM5_CLK_ENABLE()
#define TIM_MST_DBGMCU_FREEZE __HAL_DBGMCU_FREEZE_TIM5()
#define TIM_MST_RESET_ON __HAL_RCC_TIM5_FORCE_RESET()
#define TIM_MST_RESET_OFF __HAL_RCC_TIM5_RELEASE_RESET()
#define TIM_MST_16BIT 0 // 1=16-bit timer, 0=32-bit timer
#define TIM_MST_PCLK 1 // Select the peripheral clock number (1 or 2)
#define HAL_TICK_DELAY (1000) // 1 ms
#ifdef __cplusplus
}
#endif
#endif // __HAL_TICK_H
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

18388
targets/TARGET_STM/TARGET_STM32L4/TARGET_MTS_DRAGONFLY_L471QG/device/stm32l471xx.h Normal file
View File

File diff suppressed because it is too large Load Diff

240
targets/TARGET_STM/TARGET_STM32L4/TARGET_MTS_DRAGONFLY_L471QG/device/stm32l4xx.h Executable file
View File

@ -0,0 +1,240 @@
/**
******************************************************************************
* @file stm32l4xx.h
* @author MCD Application Team
* @version V1.3.1
* @date 21-April-2017
* @brief CMSIS STM32L4xx Device Peripheral Access Layer Header File.
*
* The file is the unique include file that the application programmer
* is using in the C source code, usually in main.c. This file contains:
* - Configuration section that allows to select:
* - The STM32L4xx device used in the target application
* - To use or not the peripheral's drivers in application code(i.e.
* code will be based on direct access to peripheral’s registers
* rather than drivers API), this option is controlled by
* "#define USE_HAL_DRIVER"
*
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/** @addtogroup CMSIS
* @{
*/
/** @addtogroup stm32l4xx
* @{
*/
#ifndef __STM32L4xx_H
#define __STM32L4xx_H
#ifdef __cplusplus
extern "C" {
#endif /* __cplusplus */
/** @addtogroup Library_configuration_section
* @{
*/
/**
* @brief STM32 Family
*/
#if !defined (STM32L4)
#define STM32L4
#endif /* STM32L4 */
/* Uncomment the line below according to the target STM32L4 device used in your
application
*/
#if !defined (STM32L431xx) && !defined (STM32L432xx) && !defined (STM32L433xx) && !defined (STM32L442xx) && !defined (STM32L443xx) && \
!defined (STM32L451xx) && !defined (STM32L452xx) && !defined (STM32L462xx) && \
!defined (STM32L471xx) && !defined (STM32L475xx) && !defined (STM32L476xx) && !defined (STM32L485xx) && !defined (STM32L486xx) && \
!defined (STM32L496xx) && !defined (STM32L4A6xx)
/* #define STM32L431xx */ /*!< STM32L431xx Devices */
/* #define STM32L432xx */ /*!< STM32L432xx Devices */
/* #define STM32L433xx */ /*!< STM32L433xx Devices */
/* #define STM32L442xx */ /*!< STM32L442xx Devices */
/* #define STM32L443xx */ /*!< STM32L443xx Devices */
/* #define STM32L451xx */ /*!< STM32L451xx Devices */
/* #define STM32L452xx */ /*!< STM32L452xx Devices */
/* #define STM32L462xx */ /*!< STM32L462xx Devices */
#define STM32L471xx /*!< STM32L471xx Devices */
/* #define STM32L475xx */ /*!< STM32L475xx Devices */
/* #define STM32L476xx */ /*!< STM32L476xx Devices */
/* #define STM32L485xx */ /*!< STM32L485xx Devices */
/* #define STM32L486xx */ /*!< STM32L486xx Devices */
/* #define STM32L496xx */ /*!< STM32L496xx Devices */
/* #define STM32L4A6xx */ /*!< STM32L4A6xx Devices */
#endif
/* Tip: To avoid modifying this file each time you need to switch between these
devices, you can define the device in your toolchain compiler preprocessor.
*/
#if !defined (USE_HAL_DRIVER)
/**
* @brief Comment the line below if you will not use the peripherals drivers.
In this case, these drivers will not be included and the application code will
be based on direct access to peripherals registers
*/
#define USE_HAL_DRIVER
#endif /* USE_HAL_DRIVER */
/**
* @brief CMSIS Device version number V1.3.1
*/
#define __STM32L4_CMSIS_VERSION_MAIN (0x01) /*!< [31:24] main version */
#define __STM32L4_CMSIS_VERSION_SUB1 (0x03) /*!< [23:16] sub1 version */
#define __STM32L4_CMSIS_VERSION_SUB2 (0x01) /*!< [15:8] sub2 version */
#define __STM32L4_CMSIS_VERSION_RC (0x00) /*!< [7:0] release candidate */
#define __STM32L4_CMSIS_VERSION ((__STM32L4_CMSIS_VERSION_MAIN << 24)\
|(__STM32L4_CMSIS_VERSION_SUB1 << 16)\
|(__STM32L4_CMSIS_VERSION_SUB2 << 8 )\
|(__STM32L4_CMSIS_VERSION_RC))
/**
* @}
*/
/** @addtogroup Device_Included
* @{
*/
#if defined(STM32L431xx)
#include "stm32l431xx.h"
#elif defined(STM32L432xx)
#include "stm32l432xx.h"
#elif defined(STM32L433xx)
#include "stm32l433xx.h"
#elif defined(STM32L442xx)
#include "stm32l442xx.h"
#elif defined(STM32L443xx)
#include "stm32l443xx.h"
#elif defined(STM32L451xx)
#include "stm32l451xx.h"
#elif defined(STM32L452xx)
#include "stm32l452xx.h"
#elif defined(STM32L462xx)
#include "stm32l462xx.h"
#elif defined(STM32L471xx)
#include "stm32l471xx.h"
#elif defined(STM32L475xx)
#include "stm32l475xx.h"
#elif defined(STM32L476xx)
#include "stm32l476xx.h"
#elif defined(STM32L485xx)
#include "stm32l485xx.h"
#elif defined(STM32L486xx)
#include "stm32l486xx.h"
#elif defined(STM32L496xx)
#include "stm32l496xx.h"
#elif defined(STM32L4A6xx)
#include "stm32l4a6xx.h"
#else
#error "Please select first the target STM32L4xx device used in your application (in stm32l4xx.h file)"
#endif
/**
* @}
*/
/** @addtogroup Exported_types
* @{
*/
typedef enum
{
RESET = 0,
SET = !RESET
} FlagStatus, ITStatus;
typedef enum
{
DISABLE = 0,
ENABLE = !DISABLE
} FunctionalState;
#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
typedef enum
{
ERROR = 0,
SUCCESS = !ERROR
} ErrorStatus;
/**
* @}
*/
/** @addtogroup Exported_macros
* @{
*/
#define SET_BIT(REG, BIT) ((REG) |= (BIT))
#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT))
#define READ_BIT(REG, BIT) ((REG) & (BIT))
#define CLEAR_REG(REG) ((REG) = (0x0))
#define WRITE_REG(REG, VAL) ((REG) = (VAL))
#define READ_REG(REG) ((REG))
#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
#define POSITION_VAL(VAL) (__CLZ(__RBIT(VAL)))
/**
* @}
*/
#if defined (USE_HAL_DRIVER)
#include "stm32l4xx_hal.h"
#endif /* USE_HAL_DRIVER */
#ifdef __cplusplus
}
#endif /* __cplusplus */
#endif /* __STM32L4xx_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

127
targets/TARGET_STM/TARGET_STM32L4/TARGET_MTS_DRAGONFLY_L471QG/device/system_stm32l4xx.h Executable file
View File

@ -0,0 +1,127 @@
/**
******************************************************************************
* @file system_stm32l4xx.h
* @author MCD Application Team
* @version V1.3.1
* @date 21-April-2017
* @brief CMSIS Cortex-M4 Device System Source File for STM32L4xx devices.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/** @addtogroup CMSIS
* @{
*/
/** @addtogroup stm32l4xx_system
* @{
*/
/**
* @brief Define to prevent recursive inclusion
*/
#ifndef __SYSTEM_STM32L4XX_H
#define __SYSTEM_STM32L4XX_H
#ifdef __cplusplus
extern "C" {
#endif
/** @addtogroup STM32L4xx_System_Includes
* @{
*/
/**
* @}
*/
/** @addtogroup STM32L4xx_System_Exported_Variables
* @{
*/
/* The SystemCoreClock variable is updated in three ways:
1) by calling CMSIS function SystemCoreClockUpdate()
2) by calling HAL API function HAL_RCC_GetSysClockFreq()
3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
Note: If you use this function to configure the system clock; then there
is no need to call the 2 first functions listed above, since SystemCoreClock
variable is updated automatically.
*/
extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */
extern const uint8_t AHBPrescTable[16]; /*!< AHB prescalers table values */
extern const uint8_t APBPrescTable[8]; /*!< APB prescalers table values */
extern const uint32_t MSIRangeTable[12]; /*!< MSI ranges table values */
/**
* @}
*/
/** @addtogroup STM32L4xx_System_Exported_Constants
* @{
*/
/**
* @}
*/
/** @addtogroup STM32L4xx_System_Exported_Macros
* @{
*/
/**
* @}
*/
/** @addtogroup STM32L4xx_System_Exported_Functions
* @{
*/
extern void SystemInit(void);
extern void SystemCoreClockUpdate(void);
extern void SetSysClock(void);
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /*__SYSTEM_STM32L4XX_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

476
targets/TARGET_STM/TARGET_STM32L4/TARGET_MTS_DRAGONFLY_L471QG/mtqn_low_power.c Normal file
View File

@ -0,0 +1,476 @@
/* mbed Microcontroller Library
*******************************************************************************
* Copyright (c) 2016, MultiTech Systems
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of MultiTech nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************
*/
#include "mtqn_low_power.h"
#include "stdio.h"
#include "mbed_debug.h"
static uint32_t portA[6];
static uint32_t portB[6];
static uint32_t portC[6];
static uint32_t portD[6];
static uint32_t portE[6];
static uint32_t portF[6];
static uint32_t portG[6];
static uint32_t portH[6];
void mtqn_disable_systick_int() {
SysTick->CTRL &= ~SysTick_CTRL_TICKINT_Msk;
}
void mtqn_enable_systick_int() {
SysTick->CTRL |= SysTick_CTRL_TICKINT_Msk;
}
void mtqn_save_gpio_state() {
portA[0] = GPIOA->MODER;
portA[1] = GPIOA->OTYPER;
portA[2] = GPIOA->OSPEEDR;
portA[3] = GPIOA->PUPDR;
portA[4] = GPIOA->AFR[0];
portA[5] = GPIOA->AFR[1];
portB[0] = GPIOB->MODER;
portB[1] = GPIOB->OTYPER;
portB[2] = GPIOB->OSPEEDR;
portB[3] = GPIOB->PUPDR;
portB[4] = GPIOB->AFR[0];
portB[5] = GPIOB->AFR[1];
portC[0] = GPIOC->MODER;
portC[1] = GPIOC->OTYPER;
portC[2] = GPIOC->OSPEEDR;
portC[3] = GPIOC->PUPDR;
portC[4] = GPIOC->AFR[0];
portC[5] = GPIOC->AFR[1];
portD[0] = GPIOD->MODER;
portD[1] = GPIOD->OTYPER;
portD[2] = GPIOD->OSPEEDR;
portD[3] = GPIOD->PUPDR;
portD[4] = GPIOD->AFR[0];
portD[5] = GPIOD->AFR[1];
portD[0] = GPIOD->MODER;
portD[1] = GPIOD->OTYPER;
portD[2] = GPIOD->OSPEEDR;
portD[3] = GPIOD->PUPDR;
portD[4] = GPIOD->AFR[0];
portD[5] = GPIOD->AFR[1];
portE[0] = GPIOE->MODER;
portE[1] = GPIOE->OTYPER;
portE[2] = GPIOE->OSPEEDR;
portE[3] = GPIOE->PUPDR;
portE[4] = GPIOE->AFR[0];
portE[5] = GPIOE->AFR[1];
portF[0] = GPIOF->MODER;
portF[1] = GPIOF->OTYPER;
portF[2] = GPIOF->OSPEEDR;
portF[3] = GPIOF->PUPDR;
portF[4] = GPIOF->AFR[0];
portF[5] = GPIOF->AFR[1];
portG[0] = GPIOG->MODER;
portG[1] = GPIOG->OTYPER;
portG[2] = GPIOG->OSPEEDR;
portG[3] = GPIOG->PUPDR;
portG[4] = GPIOG->AFR[0];
portG[5] = GPIOG->AFR[1];
portH[0] = GPIOH->MODER;
portH[1] = GPIOH->OTYPER;
portH[2] = GPIOH->OSPEEDR;
portH[3] = GPIOH->PUPDR;
portH[4] = GPIOH->AFR[0];
portH[5] = GPIOH->AFR[1];
}
void mtqn_restore_gpio_state() {
GPIOA->MODER = portA[0];
GPIOA->OTYPER = portA[1];
GPIOA->OSPEEDR = portA[2];
GPIOA->PUPDR = portA[3];
GPIOA->AFR[0] = portA[4];
GPIOA->AFR[1] = portA[5];
GPIOB->MODER = portB[0];
GPIOB->OTYPER = portB[1];
GPIOB->OSPEEDR = portB[2];
GPIOB->PUPDR = portB[3];
GPIOB->AFR[0] = portB[4];
GPIOB->AFR[1] = portB[5];
GPIOC->MODER = portC[0];
GPIOC->OTYPER = portC[1];
GPIOC->OSPEEDR = portC[2];
GPIOC->PUPDR = portC[3];
GPIOC->AFR[0] = portC[4];
GPIOC->AFR[1] = portC[5];
GPIOD->MODER = portD[0];
GPIOD->OTYPER = portD[1];
GPIOD->OSPEEDR = portD[2];
GPIOD->PUPDR = portD[3];
GPIOD->AFR[0] = portD[4];
GPIOD->AFR[1] = portD[5];
GPIOE->MODER = portE[0];
GPIOE->OTYPER = portE[1];
GPIOE->OSPEEDR = portE[2];
GPIOE->PUPDR = portE[3];
GPIOE->AFR[0] = portE[4];
GPIOE->AFR[1] = portE[5];
GPIOF->MODER = portF[0];
GPIOF->OTYPER = portF[1];
GPIOF->OSPEEDR = portF[2];
GPIOF->PUPDR = portF[3];
GPIOF->AFR[0] = portF[4];
GPIOF->AFR[1] = portF[5];
GPIOG->MODER = portG[0];
GPIOG->OTYPER = portG[1];
GPIOG->OSPEEDR = portG[2];
GPIOG->PUPDR = portG[3];
GPIOG->AFR[0] = portG[4];
GPIOG->AFR[1] = portG[5];
GPIOH->MODER = portH[0];
GPIOH->OTYPER = portH[1];
GPIOH->OSPEEDR = portH[2];
GPIOH->PUPDR = portH[3];
GPIOH->AFR[0] = portH[4];
GPIOH->AFR[1] = portH[5];
}
/**
* @brief System Clock Speed decrease
* The system Clock source is shifted from HSI to MSI
* while at the same time, MSI range is set to RCC_MSIRANGE_0
* to go down to 100 KHz
* @param None
* @retval None
*/
int SystemClock_Decrease(void)
{
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
/* MSI is enabled in range 0 (100Khz) */
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_MSI;
RCC_OscInitStruct.MSIState = RCC_MSI_ON;
RCC_OscInitStruct.MSIClockRange = RCC_MSIRANGE_0;
RCC_OscInitStruct.MSICalibrationValue = RCC_MSICALIBRATION_DEFAULT;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
if(HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
{
/* Initialization Error */
return -1;
}
/* Select MSI as system clock source and keep HCLK, PCLK1 and PCLK2 clocks dividers as before */
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_SYSCLK;
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_MSI;
if(HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0) != HAL_OK)
{
/* Initialization Error */
return -1;
}
/* Disable HSI to reduce power consumption since MSI is used from that point */
__HAL_RCC_HSI_DISABLE();
__HAL_RCC_LSI_DISABLE();
return 0;
}
void mtqn_pull_up_pins(){
GPIO_InitTypeDef GPIO_InitStruct;
HAL_PWREx_EnablePullUpPullDownConfig();
/* Enable GPIOs clock */
__HAL_RCC_GPIOA_CLK_ENABLE();
__HAL_RCC_GPIOB_CLK_ENABLE();
__HAL_RCC_GPIOC_CLK_ENABLE();
__HAL_RCC_GPIOD_CLK_ENABLE();
__HAL_RCC_GPIOH_CLK_ENABLE();
__HAL_RCC_GPIOE_CLK_ENABLE();
__HAL_RCC_GPIOF_CLK_ENABLE();
__HAL_RCC_GPIOG_CLK_ENABLE();
GPIO_InitStruct.Pin = GPIO_PIN_All ;
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = GPIO_PULLUP;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
GPIO_InitStruct.Pin = GPIO_PIN_All ;
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = GPIO_PULLUP;
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
GPIO_InitStruct.Pin = GPIO_PIN_All ;
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = GPIO_PULLUP;
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
GPIO_InitStruct.Pin = GPIO_PIN_All ;
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = GPIO_PULLUP;
HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
GPIO_InitStruct.Pin = GPIO_PIN_All ;
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = GPIO_PULLUP;
HAL_GPIO_Init(GPIOE, &GPIO_InitStruct);
GPIO_InitStruct.Pin = GPIO_PIN_All ;
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = GPIO_PULLUP;
HAL_GPIO_Init(GPIOF, &GPIO_InitStruct);
GPIO_InitStruct.Pin = GPIO_PIN_All ;
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = GPIO_PULLUP;
HAL_GPIO_Init(GPIOG, &GPIO_InitStruct);
/* Disable GPIOs clock */
__HAL_RCC_GPIOA_CLK_DISABLE();
__HAL_RCC_GPIOB_CLK_DISABLE();
__HAL_RCC_GPIOC_CLK_DISABLE();
__HAL_RCC_GPIOD_CLK_DISABLE();
__HAL_RCC_GPIOH_CLK_DISABLE();
__HAL_RCC_GPIOE_CLK_DISABLE();
__HAL_RCC_GPIOF_CLK_DISABLE();
__HAL_RCC_GPIOG_CLK_DISABLE();
}
void mtqn_pull_down_pins(){
GPIO_InitTypeDef GPIO_InitStruct;
HAL_PWREx_EnablePullUpPullDownConfig();
/* Enable GPIOs clock */
__HAL_RCC_GPIOA_CLK_ENABLE();
__HAL_RCC_GPIOB_CLK_ENABLE();
__HAL_RCC_GPIOC_CLK_ENABLE();
__HAL_RCC_GPIOD_CLK_ENABLE();
__HAL_RCC_GPIOH_CLK_ENABLE();
__HAL_RCC_GPIOE_CLK_ENABLE();
__HAL_RCC_GPIOF_CLK_ENABLE();
__HAL_RCC_GPIOG_CLK_ENABLE();
GPIO_InitStruct.Pin = GPIO_PIN_All ;
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = GPIO_PULLDOWN;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
GPIO_InitStruct.Pin = GPIO_PIN_All ;
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = GPIO_PULLDOWN;
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
GPIO_InitStruct.Pin = GPIO_PIN_All ;
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = GPIO_PULLDOWN;
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
GPIO_InitStruct.Pin = GPIO_PIN_All ;
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = GPIO_PULLDOWN;
HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
GPIO_InitStruct.Pin = GPIO_PIN_All ;
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = GPIO_PULLDOWN;
HAL_GPIO_Init(GPIOE, &GPIO_InitStruct);
GPIO_InitStruct.Pin = GPIO_PIN_All ;
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = GPIO_PULLDOWN;
HAL_GPIO_Init(GPIOF, &GPIO_InitStruct);
GPIO_InitStruct.Pin = GPIO_PIN_All ;
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = GPIO_PULLDOWN;
HAL_GPIO_Init(GPIOG, &GPIO_InitStruct);
/* Disable GPIOs clock */
__HAL_RCC_GPIOA_CLK_DISABLE();
__HAL_RCC_GPIOB_CLK_DISABLE();
__HAL_RCC_GPIOC_CLK_DISABLE();
__HAL_RCC_GPIOD_CLK_DISABLE();
__HAL_RCC_GPIOH_CLK_DISABLE();
__HAL_RCC_GPIOE_CLK_DISABLE();
__HAL_RCC_GPIOF_CLK_DISABLE();
__HAL_RCC_GPIOG_CLK_DISABLE();
}
void mtqn_float_pins(){
GPIO_InitTypeDef GPIO_InitStruct;
HAL_PWREx_EnablePullUpPullDownConfig();
/* Enable GPIOs clock */
__HAL_RCC_GPIOA_CLK_ENABLE();
__HAL_RCC_GPIOB_CLK_ENABLE();
__HAL_RCC_GPIOC_CLK_ENABLE();
__HAL_RCC_GPIOD_CLK_ENABLE();
__HAL_RCC_GPIOH_CLK_ENABLE();
__HAL_RCC_GPIOE_CLK_ENABLE();
__HAL_RCC_GPIOF_CLK_ENABLE();
__HAL_RCC_GPIOG_CLK_ENABLE();
GPIO_InitStruct.Pin = GPIO_PIN_All;
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = GPIO_NOPULL;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
GPIO_InitStruct.Pin = GPIO_PIN_All;
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = GPIO_NOPULL;
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
GPIO_InitStruct.Pin = GPIO_PIN_All;
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = GPIO_NOPULL;
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
GPIO_InitStruct.Pin = GPIO_PIN_All;
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = GPIO_NOPULL;
HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
GPIO_InitStruct.Pin = GPIO_PIN_All;
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = GPIO_NOPULL;
HAL_GPIO_Init(GPIOE, &GPIO_InitStruct);
GPIO_InitStruct.Pin = GPIO_PIN_All;
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = GPIO_NOPULL;
HAL_GPIO_Init(GPIOF, &GPIO_InitStruct);
GPIO_InitStruct.Pin = GPIO_PIN_All;
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = GPIO_NOPULL;
HAL_GPIO_Init(GPIOG, &GPIO_InitStruct);
/* Disable GPIOs clock */
__HAL_RCC_GPIOA_CLK_DISABLE();
__HAL_RCC_GPIOB_CLK_DISABLE();
__HAL_RCC_GPIOC_CLK_DISABLE();
__HAL_RCC_GPIOD_CLK_DISABLE();
__HAL_RCC_GPIOH_CLK_DISABLE();
__HAL_RCC_GPIOE_CLK_DISABLE();
__HAL_RCC_GPIOF_CLK_DISABLE();
__HAL_RCC_GPIOG_CLK_DISABLE();
}
void mtqn_enter_stop_mode() {
mtqn_save_gpio_state();
mtqn_float_pins();
SystemClock_Decrease();
/* Suspend Tick increment for power consumption purposes */
HAL_SuspendTick();
__HAL_RCC_TIM5_CLK_DISABLE();
// make sure wakeup flag is cleared
__HAL_PWR_CLEAR_FLAG(
PWR_FLAG_WUF1 | PWR_FLAG_WUF2 | PWR_FLAG_WUF3 | PWR_FLAG_WUF4
| PWR_FLAG_WUF5 | PWR_FLAG_WUFI);
__HAL_PWR_CLEAR_FLAG(PWR_FLAG_SB);
HAL_PWREx_EnableInternalWakeUpLine();
HAL_PWREx_EnableLowPowerRunMode();
/* Enable Power Clock */
__HAL_RCC_PWR_CLK_ENABLE();
/* Ensure that MSI is wake-up system clock */
__HAL_RCC_WAKEUPSTOP_CLK_CONFIG(RCC_STOP_WAKEUPCLOCK_MSI);
HAL_PWR_EnterSTOPMode(PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI);
HAL_PWREx_DisableLowPowerRunMode();
SetSysClock();
SystemCoreClockUpdate();
/* Resume Tick interrupt if disabled prior to Low Power Run mode entry */
HAL_ResumeTick();
__HAL_RCC_TIM5_CLK_ENABLE();
mtqn_restore_gpio_state();
}
void mtqn_enter_standby_mode() {
//mtqn_float_pins();
//mtqn_pull_down_pins();
/* Enable Power Clock */
__HAL_RCC_PWR_CLK_ENABLE();
/* Disable all used wakeup sources: WKUP pin */
HAL_PWR_DisableWakeUpPin(PWR_WAKEUP_PIN2);
/* Clear wake up Flag */
__HAL_PWR_CLEAR_FLAG(
PWR_FLAG_WUF1 | PWR_FLAG_WUF2 | PWR_FLAG_WUF3 | PWR_FLAG_WUF4
| PWR_FLAG_WUF5 | PWR_FLAG_WUFI);
/* Enable wakeup pin WKUP2 */
HAL_PWR_EnableWakeUpPin(PWR_WAKEUP_PIN2_LOW);
/* Set RTC back-up register RTC_BKP31R to indicate
later on that system has entered shutdown mode */
WRITE_REG( RTC->BKP31R, 0x1 );
/* Enter shutdown mode */
HAL_PWREx_EnterSHUTDOWNMode();
}
void mtqn_enable_standby_wake_pin() {
HAL_PWR_EnableWakeUpPin(PWR_WAKEUP_PIN1);
}
void mtqn_disable_standby_wake_pin() {
HAL_PWR_DisableWakeUpPin(PWR_WAKEUP_PIN1);
}

105
targets/TARGET_STM/TARGET_STM32L4/TARGET_MTS_DRAGONFLY_L471QG/mtqn_low_power.h Normal file
View File

@ -0,0 +1,105 @@
/* mbed Microcontroller Library
*******************************************************************************
* Copyright (c) 2016, MultiTech Systems
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of MultiTech nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************
*/
#ifndef __MTQN_LOW_POWER_H__
#define __MTQN_LOW_POWER_H__
#include "cmsis.h"
#ifdef __cplusplus
extern "C" {
#endif
/* mtqn_disable_systick_int
* disable the systick interrupt
* call this before mtqn_enter_stop_mode so systick interrupt doesn't wake up the processor
* only necessary if RTOS is used
*/
void mtqn_disable_systick_int();
/* mtqn_enable_systick_int
* enable the systick interrupt
* call this after mtqn_enter_stop_mode so RTOS can function again
* only necessary if RTOS is used
*/
void mtqn_enable_systick_int();
/* mtqn_save_gpio_state
* save current state of all GPIOs
* call this before mtqn_enter_stop_mode
* to achieve the lowest possible power consumption possible all GPIO pins must be configured for
* analog mode with no pull resistors enabled before entering STOP mode
* the mtqn_enter_stop_mode function does this for USBTX/RX and all internal pins
* after calling mtqn_save_gpio_state, the user application must do the same for WAKE, GPIO*,
* UART1_*, I2C_*, and SPI_* pins
* the user application should make a call to mtqn_restore_gpio_state after waking from STOP mode
* in order to restore GPIO functionality
*/
void mtqn_save_gpio_state();
/* mtqn_restore_gpio_state
* restore all GPIOs to the state they were in when mtqn_save_gpio_state was called
* call this after exiting from STOP mode
*/
void mtqn_restore_gpio_state();
/* mtqn_enter_stop_mode
* put the processor into STOP mode
* RAM and peripheral state is retained
* can be woken up by a number of interrupt sources including GPIOs and internal interrupts
* program execution resumes after this function when the device wakes up
*/
void mtqn_enter_stop_mode();
/* mtqn_enter_standby_mode
* put the processor into STANDBY mode
* RAM and peripheral state is lost
* can be woken up by the RTC alarm and rising edge on WAKE pin (WAKE pin must be configured first)
* program execution starts from the beginning of the application when the device wakes up
*/
void mtqn_enter_standby_mode();
/* mtqn_enable_standby_wake_pin
* configure the WAKE pin as a wakeup source from standby mode
* after this call, a rising edge on the WAKE pin will wake the processor up from standby mode
* this function should be called immediately before mtqn_enter_standby_mode
*/
void mtqn_enable_standby_wake_pin();
/* mtqn_disnable_standby_wake_pin
* should be called after waking up from standby mode
*/
void mtqn_disable_standby_wake_pin();
#ifdef __cplusplus
}
#endif
#endif /* __DRAGONFLY_LOW_POWER_H__ */

84
targets/TARGET_STM/TARGET_STM32L4/TARGET_MTS_DRAGONFLY_L471QG/objects.h Normal file
View File

@ -0,0 +1,84 @@
/* mbed Microcontroller Library
*******************************************************************************
* Copyright (c) 2015, STMicroelectronics
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************
*/
#ifndef MBED_OBJECTS_H
#define MBED_OBJECTS_H
#include "cmsis.h"
#include "PortNames.h"
#include "PeripheralNames.h"
#include "PinNames.h"
#ifdef __cplusplus
extern "C" {
#endif
struct gpio_irq_s {
IRQn_Type irq_n;
uint32_t irq_index;
uint32_t event;
PinName pin;
};
struct port_s {
PortName port;
uint32_t mask;
PinDirection direction;
__IO uint32_t *reg_in;
__IO uint32_t *reg_out;
};
//struct analogin_s {
// ADCName adc;
// PinName pin;
// uint32_t channel;
//};
//
//struct dac_s {
// DACName dac;
// PinName pin;
// uint32_t channel;
//};
//
//struct can_s {
// CANName can;
// int index;
//};
struct trng_s {
RNG_HandleTypeDef handle;
};
#include "common_objects.h"
#ifdef __cplusplus
}
#endif
#endif

87
targets/TARGET_STM/TARGET_STM32L4/TARGET_MTS_DRAGONFLY_L471QG/onboard_modem_api.c Normal file
View File

@ -0,0 +1,87 @@
/* mbed Microcontroller Library
* Copyright (c) 2017 ARM Limited
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#if MBED_CONF_NSAPI_PRESENT
#include "onboard_modem_api.h"
#include "gpio_api.h"
#include "platform/mbed_wait_api.h"
#include "PinNames.h"
#if MODEM_ON_BOARD
// Note microseconds not milliseconds
static void press_power_button(int time_us)
{
gpio_t gpio;
#if defined(TARGET_UBLOX_C030_R410M)
gpio_init_inout(&gpio, MDMPWRON, PIN_OUTPUT, OpenDrain, 0);
#else
gpio_init_out_ex(&gpio, MDMPWRON, 0);
#endif
wait_us(time_us);
gpio_write(&gpio, 1);
}
void onboard_modem_init()
{
gpio_t gpio;
// Take us out of reset
gpio_init_out_ex(&gpio, RADIO_PWR, 1);
gpio_init_out_ex(&gpio, BUF_EN, 0);
gpio_init_out_ex(&gpio, MDMRST, 1);
}
void onboard_modem_deinit()
{
gpio_t gpio;
// Back into reset
gpio_init_out_ex(&gpio, RADIO_PWR, 0);
gpio_init_out_ex(&gpio, BUF_EN, 1);
gpio_init_out_ex(&gpio, MDMRST, 0);
}
void onboard_modem_power_up()
{
#if defined(TARGET_UBLOX_C030_R410M)
/* keep the power line low for 1 seconds */
press_power_button(1000000);
#else
/* keep the power line low for 50 microseconds */
press_power_button(50);
#endif
/* give modem a little time to respond */
wait_ms(100);
}
void onboard_modem_power_down()
{
#if defined(TARGET_UBLOX_C030_R410M)
/* keep the power line low for 1.5 seconds */
press_power_button(1500000);
#else
/* keep the power line low for 1 seconds */
press_power_button(1000000);
#endif
}
#endif //MODEM_ON_BOARD
#endif //MBED_CONF_NSAPI_PRESENT

361
targets/TARGET_STM/TARGET_STM32L4/TARGET_MTS_DRAGONFLY_L471QG/system_clock.c Normal file
View File

@ -0,0 +1,361 @@
/* mbed Microcontroller Library
* Copyright (c) 2006-2017 ARM Limited
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/**
* This file configures the system clock as follows:
*-----------------------------------------------------------------------------
* System clock source | 1- USE_PLL_HSE_EXTC (external 8 MHz clock)
* | 2- USE_PLL_HSE_XTAL (external 8 MHz xtal)
* | 3- USE_PLL_HSI (internal 16 MHz)
* | 4- USE_PLL_MSI (internal 100kHz to 48 MHz)
*-----------------------------------------------------------------------------
* SYSCLK(MHz) | 80
* AHBCLK (MHz) | 80
* APB1CLK (MHz) | 80
* APB2CLK (MHz) | 80
* USB capable | YES
*-----------------------------------------------------------------------------
**/
#include "stm32l4xx.h"
#include "nvic_addr.h"
#include "mbed_assert.h"
/*!< Uncomment the following line if you need to relocate your vector Table in
Internal SRAM. */
/* #define VECT_TAB_SRAM */
#define VECT_TAB_OFFSET 0x00 /*!< Vector Table base offset field.
This value must be a multiple of 0x200. */
// clock source is selected with CLOCK_SOURCE in json config
#define USE_PLL_HSE_EXTC 0x8 // Use external clock (ST Link MCO - not enabled by default)
#define USE_PLL_HSE_XTAL 0x4 // Use external xtal (X3 on board - not provided by default)
#define USE_PLL_HSI 0x2 // Use HSI internal clock
#define USE_PLL_MSI 0x1 // Use MSI internal clock
#define DEBUG_MCO (0) // Output the MCO on PA8 for debugging (0=OFF, 1=SYSCLK, 2=HSE, 3=HSI, 4=MSI)
#if ( ((CLOCK_SOURCE) & USE_PLL_HSE_XTAL) || ((CLOCK_SOURCE) & USE_PLL_HSE_EXTC) )
uint8_t SetSysClock_PLL_HSE(uint8_t bypass);
#endif /* ((CLOCK_SOURCE) & USE_PLL_HSE_XTAL) || ((CLOCK_SOURCE) & USE_PLL_HSE_EXTC) */
#if ((CLOCK_SOURCE) & USE_PLL_HSI)
uint8_t SetSysClock_PLL_HSI(void);
#endif /* ((CLOCK_SOURCE) & USE_PLL_HSI) */
#if ((CLOCK_SOURCE) & USE_PLL_MSI)
uint8_t SetSysClock_PLL_MSI(void);
#endif /* ((CLOCK_SOURCE) & USE_PLL_MSI) */
/**
* @brief Setup the microcontroller system.
* @param None
* @retval None
*/
void SystemInit(void)
{
/* FPU settings ------------------------------------------------------------*/
#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
SCB->CPACR |= ((3UL << 10*2)|(3UL << 11*2)); /* set CP10 and CP11 Full Access */
#endif
/* Reset the RCC clock configuration to the default reset state ------------*/
/* Set MSION bit */
RCC->CR |= RCC_CR_MSION;
/* Reset CFGR register */
RCC->CFGR = 0x00000000;
/* Reset HSEON, CSSON , HSION, and PLLON bits */
RCC->CR &= (uint32_t)0xEAF6FFFF;
/* Reset PLLCFGR register */
RCC->PLLCFGR = 0x00001000;
/* Reset HSEBYP bit */
RCC->CR &= (uint32_t)0xFFFBFFFF;
/* Disable all interrupts */
RCC->CIER = 0x00000000;
/* Configure the Vector Table location add offset address ------------------*/
#ifdef VECT_TAB_SRAM
SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
#else
SCB->VTOR = NVIC_FLASH_VECTOR_ADDRESS; /* Vector Table Relocation in Internal FLASH */
#endif
}
/**
* @brief Configures the System clock source, PLL Multiplier and Divider factors,
* AHB/APBx prescalers and Flash settings
* @note This function should be called only once the RCC clock configuration
* is reset to the default reset state (done in SystemInit() function).
* @param None
* @retval None
*/
void SetSysClock(void)
{
#if ((CLOCK_SOURCE) & USE_PLL_HSE_EXTC)
/* 1- Try to start with HSE and external clock */
if (SetSysClock_PLL_HSE(1) == 0)
#endif
{
#if ((CLOCK_SOURCE) & USE_PLL_HSE_XTAL)
/* 2- If fail try to start with HSE and external xtal */
if (SetSysClock_PLL_HSE(0) == 0)
#endif
{
#if ((CLOCK_SOURCE) & USE_PLL_HSI)
/* 3- If fail start with HSI clock */
if (SetSysClock_PLL_HSI()==0)
#endif
{
#if ((CLOCK_SOURCE) & USE_PLL_MSI)
/* 4- If fail start with MSI clock */
if (SetSysClock_PLL_MSI() == 0)
#endif
{
while(1) {
MBED_ASSERT(1);
}
}
}
}
}
// Output clock on MCO1 pin(PA8) for debugging purpose
#if DEBUG_MCO == 1
HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_SYSCLK, RCC_MCODIV_1);
#endif
}
#if ( ((CLOCK_SOURCE) & USE_PLL_HSE_XTAL) || ((CLOCK_SOURCE) & USE_PLL_HSE_EXTC) )
/******************************************************************************/
/* PLL (clocked by HSE) used as System clock source */
/******************************************************************************/
uint8_t SetSysClock_PLL_HSE(uint8_t bypass)
{
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
RCC_PeriphCLKInitTypeDef RCC_PeriphClkInit = {0};
// Used to gain time after DeepSleep in case HSI is used
if (__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) {
return 0;
}
// Select MSI as system clock source to allow modification of the PLL configuration
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_SYSCLK;
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_MSI;
HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0);
// Enable HSE oscillator and activate PLL with HSE as source
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI;
if (bypass == 0) {
RCC_OscInitStruct.HSEState = RCC_HSE_ON; // External 8 MHz xtal on OSC_IN/OSC_OUT
} else {
RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; // External 8 MHz clock on OSC_IN
}
RCC_OscInitStruct.HSIState = RCC_HSI_OFF;
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; // 8 MHz
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
RCC_OscInitStruct.PLL.PLLM = 1; // VCO input clock = 8 MHz (8 MHz / 1)
RCC_OscInitStruct.PLL.PLLN = 20; // VCO output clock = 160 MHz (8 MHz * 20)
RCC_OscInitStruct.PLL.PLLP = 7; // PLLSAI3 clock = 22 MHz (160 MHz / 7)
RCC_OscInitStruct.PLL.PLLQ = 2;
RCC_OscInitStruct.PLL.PLLR = 2; // PLL clock = 80 MHz (160 MHz / 2)
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
return 0; // FAIL
}
// Select PLL clock as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers
RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; // 80 MHz or 48 MHz
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; // 80 MHz or 48 MHz
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; // 80 MHz or 48 MHz
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; // 80 MHz or 48 MHz
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4) != HAL_OK) {
return 0; // FAIL
}
RCC_PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USB;
RCC_PeriphClkInit.UsbClockSelection = RCC_USBCLKSOURCE_PLLSAI1;
RCC_PeriphClkInit.PLLSAI1.PLLSAI1Source = RCC_PLLSOURCE_HSE;
RCC_PeriphClkInit.PLLSAI1.PLLSAI1M = 1;
RCC_PeriphClkInit.PLLSAI1.PLLSAI1N = 12;
RCC_PeriphClkInit.PLLSAI1.PLLSAI1P = RCC_PLLP_DIV7;
RCC_PeriphClkInit.PLLSAI1.PLLSAI1Q = RCC_PLLQ_DIV2;
RCC_PeriphClkInit.PLLSAI1.PLLSAI1R = RCC_PLLR_DIV2;
RCC_PeriphClkInit.PLLSAI1.PLLSAI1ClockOut = RCC_PLLSAI1_48M2CLK;
if (HAL_RCCEx_PeriphCLKConfig(&RCC_PeriphClkInit) != HAL_OK) {
return 0; // FAIL
}
// Disable MSI Oscillator
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_MSI;
RCC_OscInitStruct.MSIState = RCC_MSI_OFF;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; // No PLL update
HAL_RCC_OscConfig(&RCC_OscInitStruct);
// Output clock on MCO1 pin(PA8) for debugging purpose
#if DEBUG_MCO == 2
if (bypass == 0)
HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSE, RCC_MCODIV_2); // 4 MHz
else
HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSE, RCC_MCODIV_1); // 8 MHz
#endif
return 1; // OK
}
#endif /* ((CLOCK_SOURCE) & USE_PLL_HSE_XTAL) || ((CLOCK_SOURCE) & USE_PLL_HSE_EXTC) */
#if ((CLOCK_SOURCE) & USE_PLL_HSI)
/******************************************************************************/
/* PLL (clocked by HSI) used as System clock source */
/******************************************************************************/
uint8_t SetSysClock_PLL_HSI(void)
{
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
RCC_PeriphCLKInitTypeDef RCC_PeriphClkInit = {0};
// Select MSI as system clock source to allow modification of the PLL configuration
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_SYSCLK;
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_MSI;
HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0);
// Enable HSI oscillator and activate PLL with HSI as source
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSE;
RCC_OscInitStruct.HSEState = RCC_HSE_OFF;
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI; // 16 MHz
RCC_OscInitStruct.PLL.PLLM = 2; // VCO input clock = 8 MHz (16 MHz / 2)
RCC_OscInitStruct.PLL.PLLN = 20; // VCO output clock = 160 MHz (8 MHz * 20)
RCC_OscInitStruct.PLL.PLLP = 7; // PLLSAI3 clock = 22 MHz (160 MHz / 7)
RCC_OscInitStruct.PLL.PLLQ = 2;
RCC_OscInitStruct.PLL.PLLR = 2; // PLL clock = 80 MHz (160 MHz / 2)
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
return 0; // FAIL
}
// Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers
RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; // 80 MHz
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; // 80 MHz
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; // 80 MHz
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; // 80 MHz
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4) != HAL_OK) {
return 0; // FAIL
}
RCC_PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USB;
RCC_PeriphClkInit.UsbClockSelection = RCC_USBCLKSOURCE_PLLSAI1;
RCC_PeriphClkInit.PLLSAI1.PLLSAI1Source = RCC_PLLSOURCE_HSI;
RCC_PeriphClkInit.PLLSAI1.PLLSAI1M = 2;
RCC_PeriphClkInit.PLLSAI1.PLLSAI1N = 12;
RCC_PeriphClkInit.PLLSAI1.PLLSAI1P = RCC_PLLP_DIV7;
RCC_PeriphClkInit.PLLSAI1.PLLSAI1Q = RCC_PLLQ_DIV2;
RCC_PeriphClkInit.PLLSAI1.PLLSAI1R = RCC_PLLR_DIV2;
RCC_PeriphClkInit.PLLSAI1.PLLSAI1ClockOut = RCC_PLLSAI1_48M2CLK;
if (HAL_RCCEx_PeriphCLKConfig(&RCC_PeriphClkInit) != HAL_OK) {
return 0; // FAIL
}
// Disable MSI Oscillator
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_MSI;
RCC_OscInitStruct.MSIState = RCC_MSI_OFF;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; // No PLL update
HAL_RCC_OscConfig(&RCC_OscInitStruct);
// Output clock on MCO1 pin(PA8) for debugging purpose
#if DEBUG_MCO == 3
HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSI, RCC_MCODIV_1); // 16 MHz
#endif
return 1; // OK
}
#endif /* ((CLOCK_SOURCE) & USE_PLL_HSI) */
#if ((CLOCK_SOURCE) & USE_PLL_MSI)
/******************************************************************************/
/* PLL (clocked by MSI) used as System clock source */
/******************************************************************************/
uint8_t SetSysClock_PLL_MSI(void)
{
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0};
// Enable LSE Oscillator to automatically calibrate the MSI clock
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSE;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; // No PLL update
RCC_OscInitStruct.LSEState = RCC_LSE_ON; // External 32.768 kHz clock on OSC_IN/OSC_OUT
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) == HAL_OK) {
RCC->CR |= RCC_CR_MSIPLLEN; // Enable MSI PLL-mode
}
HAL_RCCEx_DisableLSECSS();
/* Enable MSI Oscillator and activate PLL with MSI as source */
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_MSI | RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSE;
RCC_OscInitStruct.MSIState = RCC_MSI_ON;
RCC_OscInitStruct.HSEState = RCC_HSE_OFF;
RCC_OscInitStruct.HSIState = RCC_HSI_OFF;
RCC_OscInitStruct.MSICalibrationValue = RCC_MSICALIBRATION_DEFAULT;
RCC_OscInitStruct.MSIClockRange = RCC_MSIRANGE_11; /* 48 MHz */
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_MSI;
RCC_OscInitStruct.PLL.PLLM = 6; /* 8 MHz */
RCC_OscInitStruct.PLL.PLLN = 40; /* 320 MHz */
RCC_OscInitStruct.PLL.PLLP = 7; /* 45 MHz */
RCC_OscInitStruct.PLL.PLLQ = 4; /* 80 MHz */
RCC_OscInitStruct.PLL.PLLR = 4; /* 80 MHz */
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
return 0; // FAIL
}
/* Enable MSI Auto-calibration through LSE */
HAL_RCCEx_EnableMSIPLLMode();
/* Select MSI output as USB clock source */
PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USB;
PeriphClkInitStruct.UsbClockSelection = RCC_USBCLKSOURCE_MSI; /* 48 MHz */
HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct);
// Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers
RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; /* 80 MHz */
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; /* 80 MHz */
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; /* 80 MHz */
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; /* 80 MHz */
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4) != HAL_OK) {
return 0; // FAIL
}
// Output clock on MCO1 pin(PA8) for debugging purpose
#if DEBUG_MCO == 4
HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_MSI, RCC_MCODIV_2); // 2 MHz
#endif
return 1; // OK
}
#endif /* ((CLOCK_SOURCE) & USE_PLL_MSI) */

45
targets/TARGET_STM/TARGET_STM32L4/TARGET_MTS_DRAGONFLY_L471QG/ublox_low_level_api.c Normal file
View File

@ -0,0 +1,45 @@
/* mbed Microcontroller Library
* Copyright (c) 2006-2013 ARM Limited
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include "ublox_low_level_api.h"
#include <stdbool.h>
#include "gpio_api.h"
void ublox_board_init(void) {
gpio_t gpio;
// Enable power to 3V3
gpio_init_inout(&gpio, RADIO_PWR, PIN_OUTPUT, OpenDrain, 1);
gpio_init_inout(&gpio, VUSB_EN, PIN_OUTPUT, OpenDrain, 0);
// start with modem disabled
gpio_init_out_ex(&gpio, MDMRST, 0);
#if defined(TARGET_UBLOX_C030_R410M)
gpio_init_inout(&gpio, MDMPWRON, PIN_OUTPUT, OpenDrain, 1);
#else
gpio_init_out_ex(&gpio, MDMPWRON, 0);
#endif
gpio_init_out_ex(&gpio, MDMRTS, 0);
//gpio_init_in_ex(&gpio, MDMCURRENTSENSE, PullNone);
#if !defined (TARGET_UBLOX_C030_R410M)
// start with GNSS disabled, this is ONLY TEMPORARY and that once the HW issue with the GNSSEN pin on the R410M board is resolved then this line will become default for all platforms.
// gpio_init_inout(&gpio, GNSSEN, PIN_OUTPUT, PushPullNoPull, 0);
#endif
}
// End Of File

14
targets/TARGET_STM/TARGET_STM32L4/TARGET_MTS_DRAGONFLY_L471QG/ublox_low_level_api.h Normal file
View File

@ -0,0 +1,14 @@
#ifndef UBLOX_LOW_LEVEL_API_H
#define UBLOX_LOW_LEVEL_API_H
#ifdef __cplusplus
extern "C" {
#endif
void ublox_board_init(void);
#ifdef __cplusplus
}
#endif
#endif // UBLOX_LOW_LEVEL_H

3
targets/TARGET_STM/mbed_rtx.h
View File

@ -25,7 +25,8 @@
defined(TARGET_STM32L476RG) ||\
defined(TARGET_STM32L476JG) ||\
defined(TARGET_STM32L476VG) ||\
defined(TARGET_STM32L486RG))
defined(TARGET_STM32L486RG) ||\
defined(TARGET_STM32L471QG))
/* only GCC_ARM and IAR toolchains have the stack on SRAM2 */
#if (((defined(__GNUC__) && !defined(__CC_ARM)) ||\
defined(__IAR_SYSTEMS_ICC__ )) &&\

30
targets/targets.json
View File

@ -2235,6 +2235,36 @@
"release_versions": ["2", "5"],
"device_name": "STM32F411RE"
},
"MTS_DRAGONFLY_L471QG": {
"inherits": ["FAMILY_STM32"],
"supported_form_factors": ["ARDUINO"],
"core": "Cortex-M4F",
"extra_labels_add": ["STM32L4", "STM32L471QG", "STM32L471xG", "STM32L471xx"],
"config": {
"clock_source": {
"help": "Mask value : USE_PLL_HSE_EXTC (need HW patch) | USE_PLL_HSE_XTAL (need HW patch) | USE_PLL_HSI | USE_PLL_MSI",
"value": "USE_PLL_MSI",
"macro_name": "CLOCK_SOURCE"
},
"modem_is_on_board": {
"help": "Value: Tells the build system that the modem is on-board as oppose to a plug-in shield/module.",
"value": 1,
"macro_name": "MODEM_ON_BOARD"
},
"modem_data_connection_type": {
"help": "Value: Defines how an on-board modem is wired up to the MCU, e.g., data connection can be a UART or USB and so forth.",
"value": 1,
"macro_name": "MODEM_ON_BOARD_UART"
}
},
"detect_code": ["0312"],
"macros_add": [ "RTC_LSE=1"],
"device_has_add": ["ANALOGOUT", "CAN", "LOWPOWERTIMER", "SERIAL_ASYNCH", "SERIAL_FC", "TRNG", "FLASH", "ANALOGIN", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
"release_versions": ["2", "5"],
"device_name": "STM32L471QG",
"bootloader_supported": true,
"features": ["IPV4"]
},
"MTB_MTS_DRAGONFLY": {
"inherits": ["FAMILY_STM32"],
"core": "Cortex-M4F",