Merge pull request #8266 from M-ichae-l/realtek-rtl8195am-Add-MCU_target-updates

Realtek-rtl8195am: Add MCU_ target

targets/TARGET_Realtek/TARGET_AMEBA/TARGET_MCU_RTL8195A/PeripheralPins.h

@@ -0,0 +1,46 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PERIPHERALPINS_H
+#define MBED_PERIPHERALPINS_H
+
+#include "cmsis.h"
+#include "pinmap.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+// for spi_api.c
+extern const PinMap PinMap_SSI_MOSI[];
+extern const PinMap PinMap_SSI_MISO[];
+
+// for serial_api.c
+extern const PinMap PinMap_UART_TX[];
+extern const PinMap PinMap_UART_RX[];
+
+// for pwmout_api.c
+extern const PinMap PinMap_PWM[];
+
+// for i2c_api.c
+extern const PinMap PinMap_I2C_SDA[];
+extern const PinMap PinMap_I2C_SCL[];
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+

targets/TARGET_Realtek/TARGET_AMEBA/TARGET_MCU_RTL8195A/TARGET_RTL8195A/PeripheralPins.c

@@ -0,0 +1,141 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "PeripheralPins.h"
+
+// for spi_api.c
+const PinMap PinMap_SSI_MOSI[] = {
+    {PE_2,  RTL_PIN_PERI(SPI0, 0, S0), RTL_PIN_FUNC(SPI0, S0)},
+    {PC_2,  RTL_PIN_PERI(SPI0, 0, S1), RTL_PIN_FUNC(SPI0, S1)},
+    {PA_1,  RTL_PIN_PERI(SPI1, 1, S0), RTL_PIN_FUNC(SPI1, S0)},
+    {PB_6,  RTL_PIN_PERI(SPI1, 1, S1), RTL_PIN_FUNC(SPI1, S1)},
+    {PD_6,  RTL_PIN_PERI(SPI1, 1, S2), RTL_PIN_FUNC(SPI1, S2)},
+    {PG_2,  RTL_PIN_PERI(SPI2, 2, S0), RTL_PIN_FUNC(SPI2, S0)},
+    {PE_6,  RTL_PIN_PERI(SPI2, 2, S1), RTL_PIN_FUNC(SPI2, S1)},
+    {PD_2,  RTL_PIN_PERI(SPI2, 2, S2), RTL_PIN_FUNC(SPI2, S2)},
+    {NC,    NC,     0}
+};
+
+const PinMap PinMap_SSI_MISO[] = {
+    {PE_3,  RTL_PIN_PERI(SPI0, 0, S0), RTL_PIN_FUNC(SPI0, S0)},
+    {PC_3,  RTL_PIN_PERI(SPI0, 0, S1), RTL_PIN_FUNC(SPI0, S1)},
+    {PA_0,  RTL_PIN_PERI(SPI1, 1, S0), RTL_PIN_FUNC(SPI1, S0)},
+    {PB_7,  RTL_PIN_PERI(SPI1, 1, S1), RTL_PIN_FUNC(SPI1, S1)},
+    {PD_7,  RTL_PIN_PERI(SPI1, 1, S2), RTL_PIN_FUNC(SPI1, S2)},
+    {PG_3,  RTL_PIN_PERI(SPI2, 2, S0), RTL_PIN_FUNC(SPI2, S0)},
+    {PE_7,  RTL_PIN_PERI(SPI2, 2, S1), RTL_PIN_FUNC(SPI2, S1)},
+    {PD_3,  RTL_PIN_PERI(SPI2, 2, S2), RTL_PIN_FUNC(SPI2, S2)},
+    {NC,    NC,     0}
+};
+
+// for serial_api.c
+const PinMap PinMap_UART_TX[] = {
+    {PC_3,  RTL_PIN_PERI(UART0, 0, S0), RTL_PIN_FUNC(UART0, S0)},
+    {PE_0,  RTL_PIN_PERI(UART0, 0, S1), RTL_PIN_FUNC(UART0, S1)},
+    {PA_7,  RTL_PIN_PERI(UART0, 0, S2), RTL_PIN_FUNC(UART0, S2)},
+    {PD_3,  RTL_PIN_PERI(UART1, 1, S0), RTL_PIN_FUNC(UART1, S0)},
+    {PE_4,  RTL_PIN_PERI(UART1, 1, S1), RTL_PIN_FUNC(UART1, S1)},
+    {PB_5,  RTL_PIN_PERI(UART1, 1, S2), RTL_PIN_FUNC(UART1, S2)},
+    {PA_4,  RTL_PIN_PERI(UART2, 2, S0), RTL_PIN_FUNC(UART2, S0)},
+    {PC_9,  RTL_PIN_PERI(UART2, 2, S1), RTL_PIN_FUNC(UART2, S1)},
+    {PD_7,  RTL_PIN_PERI(UART2, 2, S2), RTL_PIN_FUNC(UART2, S2)},
+    {PB_0,  RTL_PIN_PERI(LOG_UART, 3, S0), RTL_PIN_FUNC(LOG_UART, S0)},
+    {NC,    NC,     0}
+};
+
+const PinMap PinMap_UART_RX[] = {
+    {PC_0,  RTL_PIN_PERI(UART0, 0, S0), RTL_PIN_FUNC(UART0, S0)},
+    {PE_3,  RTL_PIN_PERI(UART0, 0, S1), RTL_PIN_FUNC(UART0, S1)},
+    {PA_6,  RTL_PIN_PERI(UART0, 0, S2), RTL_PIN_FUNC(UART0, S2)},
+    {PD_0,  RTL_PIN_PERI(UART1, 1, S0), RTL_PIN_FUNC(UART1, S0)},
+    {PE_7,  RTL_PIN_PERI(UART1, 1, S1), RTL_PIN_FUNC(UART1, S1)},
+    {PB_4,  RTL_PIN_PERI(UART1, 1, S2), RTL_PIN_FUNC(UART1, S2)},
+    {PA_0,  RTL_PIN_PERI(UART2, 2, S0), RTL_PIN_FUNC(UART2, S0)},
+    {PC_6,  RTL_PIN_PERI(UART2, 2, S1), RTL_PIN_FUNC(UART2, S1)},
+    {PD_4,  RTL_PIN_PERI(UART2, 2, S2), RTL_PIN_FUNC(UART2, S2)},
+    {PB_1,  RTL_PIN_PERI(LOG_UART, 3, S0), RTL_PIN_FUNC(LOG_UART, S0)},
+    {NC,    NC,     0}
+};
+
+// for pwmout_api.c
+const PinMap PinMap_PWM[] = {
+    {PB_4,  RTL_PIN_PERI(PWM0, 0, S0), RTL_PIN_FUNC(PWM0, S0)},
+    {PB_5,  RTL_PIN_PERI(PWM1, 1, S0), RTL_PIN_FUNC(PWM1, S0)},
+    {PB_6,  RTL_PIN_PERI(PWM2, 2, S0), RTL_PIN_FUNC(PWM2, S0)},
+    {PB_7,  RTL_PIN_PERI(PWM3, 3, S0), RTL_PIN_FUNC(PWM3, S0)},
+
+    {PC_0,  RTL_PIN_PERI(PWM0, 0, S1), RTL_PIN_FUNC(PWM0, S1)},
+    {PC_1,  RTL_PIN_PERI(PWM1, 1, S1), RTL_PIN_FUNC(PWM1, S1)},
+    {PC_2,  RTL_PIN_PERI(PWM2, 2, S1), RTL_PIN_FUNC(PWM2, S1)},
+    {PC_3,  RTL_PIN_PERI(PWM3, 3, S1), RTL_PIN_FUNC(PWM3, S1)},
+
+    {PD_3,  RTL_PIN_PERI(PWM0, 0, S2), RTL_PIN_FUNC(PWM0, S2)},
+    {PD_4,  RTL_PIN_PERI(PWM1, 1, S2), RTL_PIN_FUNC(PWM1, S2)},
+    {PD_5,  RTL_PIN_PERI(PWM2, 2, S2), RTL_PIN_FUNC(PWM2, S2)},
+    {PD_6,  RTL_PIN_PERI(PWM3, 3, S2), RTL_PIN_FUNC(PWM3, S2)},
+
+    {PE_0,  RTL_PIN_PERI(PWM0, 0, S3), RTL_PIN_FUNC(PWM0, S3)},
+    {PE_1,  RTL_PIN_PERI(PWM1, 1, S3), RTL_PIN_FUNC(PWM1, S3)},
+    {PE_2,  RTL_PIN_PERI(PWM2, 2, S3), RTL_PIN_FUNC(PWM2, S3)},
+    {PE_3,  RTL_PIN_PERI(PWM3, 3, S3), RTL_PIN_FUNC(PWM3, S3)},
+
+    {NC,    NC,     0}
+};
+
+// for i2c_api.c
+const PinMap PinMap_I2C_SDA[] = {
+    {PD_4,  RTL_PIN_PERI(I2C0, 0, S0), RTL_PIN_FUNC(I2C0, S0)},
+    {PH_1,  RTL_PIN_PERI(I2C0, 0, S1), RTL_PIN_FUNC(I2C0, S1)},
+    {PC_8,  RTL_PIN_PERI(I2C0, 0, S2), RTL_PIN_FUNC(I2C0, S2)},
+    {PE_7,  RTL_PIN_PERI(I2C0, 0, S3), RTL_PIN_FUNC(I2C0, S3)},
+    
+    {PC_4,  RTL_PIN_PERI(I2C1, 1, S0), RTL_PIN_FUNC(I2C1, S0)},
+    {PH_3,  RTL_PIN_PERI(I2C1, 1, S1), RTL_PIN_FUNC(I2C1, S1)},
+    {PD_7,  RTL_PIN_PERI(I2C1, 1, S2), RTL_PIN_FUNC(I2C1, S2)},
+
+    {PB_7,  RTL_PIN_PERI(I2C2, 2, S0), RTL_PIN_FUNC(I2C2, S0)},
+    {PE_1,  RTL_PIN_PERI(I2C2, 2, S1), RTL_PIN_FUNC(I2C2, S1)},
+    {PC_7,  RTL_PIN_PERI(I2C2, 2, S2), RTL_PIN_FUNC(I2C2, S2)},
+
+    {PB_3,  RTL_PIN_PERI(I2C3, 3, S0), RTL_PIN_FUNC(I2C3, S0)},
+    {PE_3,  RTL_PIN_PERI(I2C3, 3, S1), RTL_PIN_FUNC(I2C3, S1)},
+    {PE_5,  RTL_PIN_PERI(I2C3, 3, S2), RTL_PIN_FUNC(I2C3, S2)},
+    {PD_9,  RTL_PIN_PERI(I2C3, 3, S3), RTL_PIN_FUNC(I2C3, S3)},
+
+    {NC,    NC,     0}
+};
+
+const PinMap PinMap_I2C_SCL[] = {
+    {PD_5,  RTL_PIN_PERI(I2C0, 0, S0), RTL_PIN_FUNC(I2C0, S0)},
+    {PH_0,  RTL_PIN_PERI(I2C0, 0, S1), RTL_PIN_FUNC(I2C0, S1)},
+    {PC_9,  RTL_PIN_PERI(I2C0, 0, S2), RTL_PIN_FUNC(I2C0, S2)},
+    {PE_6,  RTL_PIN_PERI(I2C0, 0, S3), RTL_PIN_FUNC(I2C0, S3)},
+
+    {PC_5,  RTL_PIN_PERI(I2C1, 1, S0), RTL_PIN_FUNC(I2C1, S0)},
+    {PH_2,  RTL_PIN_PERI(I2C1, 1, S1), RTL_PIN_FUNC(I2C1, S1)},
+    {PD_6,  RTL_PIN_PERI(I2C1, 1, S2), RTL_PIN_FUNC(I2C1, S2)},
+
+    {PB_6,  RTL_PIN_PERI(I2C2, 2, S0), RTL_PIN_FUNC(I2C2, S0)},
+    {PE_0,  RTL_PIN_PERI(I2C2, 2, S1), RTL_PIN_FUNC(I2C2, S1)},
+    {PC_6,  RTL_PIN_PERI(I2C2, 2, S2), RTL_PIN_FUNC(I2C2, S2)},
+    
+    {PB_2,  RTL_PIN_PERI(I2C3, 3, S0), RTL_PIN_FUNC(I2C3, S0)},
+    {PE_2,  RTL_PIN_PERI(I2C3, 3, S1), RTL_PIN_FUNC(I2C3, S1)},
+    {PE_4,  RTL_PIN_PERI(I2C3, 3, S2), RTL_PIN_FUNC(I2C3, S2)},
+    {PD_8,  RTL_PIN_PERI(I2C3, 3, S3), RTL_PIN_FUNC(I2C3, S3)},
+
+    {NC,    NC,     0}
+};

targets/TARGET_Realtek/TARGET_AMEBA/TARGET_MCU_RTL8195A/gpio_api.c

@@ -210,3 +210,4 @@ int gpio_is_connected(const gpio_t *obj)
 }
 
 #endif
+

targets/TARGET_Realtek/TARGET_AMEBA/TARGET_MCU_RTL8195A/i2c_api.c

@@ -24,7 +24,9 @@
 
 #include "pinmap.h"
 
-
+#ifdef CONFIG_MBED_ENABLED
+#include "PeripheralPins.h"
+#else
 static const PinMap PinMap_I2C_SDA[] = {
     {PD_4,  RTL_PIN_PERI(I2C0, 0, S0), RTL_PIN_FUNC(I2C0, S0)},
     {PH_1,  RTL_PIN_PERI(I2C0, 0, S1), RTL_PIN_FUNC(I2C0, S1)},
@@ -68,6 +70,7 @@ static const PinMap PinMap_I2C_SCL[] = {
 
     {NC,    NC,     0}
 };
+#endif
 
 static int address_save_int[4];
 static int Byte_count[4];

targets/TARGET_Realtek/TARGET_AMEBA/TARGET_MCU_RTL8195A/log_uart_api.h

@@ -328,3 +328,4 @@ uint8_t log_uart_raed_msr(log_uart_t *obj);
 
 #endif //CONFIG_PLATFORM_8195A
 #endif  // end of "#ifndef LOG_UART_API_H"
+

targets/TARGET_Realtek/TARGET_AMEBA/TARGET_MCU_RTL8195A/pwmout_api.c

@@ -26,7 +26,10 @@
 
 #ifdef CONFIG_PWM_EN
 #include "pwmout_api.h"
-     
+
+#ifdef CONFIG_MBED_ENABLED
+#include "PeripheralPins.h"
+#else
 static const PinMap PinMap_PWM[] = {
     {PB_4,  RTL_PIN_PERI(PWM0, 0, S0), RTL_PIN_FUNC(PWM0, S0)},
     {PB_5,  RTL_PIN_PERI(PWM1, 1, S0), RTL_PIN_FUNC(PWM1, S0)},
@@ -50,7 +53,8 @@ static const PinMap PinMap_PWM[] = {
 
     {NC,    NC,     0}
 };
- 
+#endif
+
 void pwmout_init(pwmout_t* obj, PinName pin) 
 {
     int peripheral;

targets/TARGET_Realtek/TARGET_AMEBA/TARGET_MCU_RTL8195A/serial_api.c

@@ -27,6 +27,9 @@
 #include "pinmap.h"
 #include <string.h>
 
+#ifdef CONFIG_MBED_ENABLED
+#include "PeripheralPins.h"
+#else
 static const PinMap PinMap_UART_TX[] = {
     {PC_3,  RTL_PIN_PERI(UART0, 0, S0), RTL_PIN_FUNC(UART0, S0)},
     {PE_0,  RTL_PIN_PERI(UART0, 0, S1), RTL_PIN_FUNC(UART0, S1)},
@@ -54,6 +57,7 @@ static const PinMap PinMap_UART_RX[] = {
     {PB_1,  RTL_PIN_PERI(LOG_UART, 3, S0), RTL_PIN_FUNC(LOG_UART, S0)},
     {NC,    NC,     0}
 };
+#endif
 
 #define UART_NUM (3)
 #define SERIAL_TX_IRQ_EN        0x01

targets/TARGET_Realtek/TARGET_AMEBA/TARGET_MCU_RTL8195A/spi_api.c

@@ -41,6 +41,9 @@ uint8_t SPI0_IS_AS_SLAVE = 0;
 //TODO: Load default Setting: It should be loaded from external setting file.
 extern const DW_SSI_DEFAULT_SETTING SpiDefaultSetting;
 
+#ifdef CONFIG_MBED_ENABLED
+#include "PeripheralPins.h"
+#else
 static const PinMap PinMap_SSI_MOSI[] = {
     {PE_2,  RTL_PIN_PERI(SPI0, 0, S0), RTL_PIN_FUNC(SPI0, S0)},
     {PC_2,  RTL_PIN_PERI(SPI0, 0, S1), RTL_PIN_FUNC(SPI0, S1)},
@@ -64,7 +67,7 @@ static const PinMap PinMap_SSI_MISO[] = {
     {PD_3,  RTL_PIN_PERI(SPI2, 2, S2), RTL_PIN_FUNC(SPI2, S2)},
     {NC,    NC,     0}
 };
-
+#endif
 
 void spi_init (spi_t *obj, PinName mosi, PinName miso, PinName sclk, PinName ssel)
 {
@@ -332,7 +335,6 @@ int spi_busy (spi_t *obj)
     return (int)pHalSsiOp->HalSsiBusy(pHalSsiAdaptor);
 }
 
-
 // Bus Idle: Real TX done, TX FIFO empty and bus shift all data out already
 void spi_bus_tx_done_callback(VOID *obj)
 {
@@ -370,3 +372,4 @@ void spi_rx_done_callback(VOID *obj)
         handler(spi_obj->irq_id, SpiRxIrq);
     }
 }
+

targets/targets.json

@@ -4110,16 +4110,15 @@
         "inherits": ["SARA_NBIOT"],
         "extra_labels": ["ublox", "HI2110", "SARA_NBIOT"]
     },
-    "REALTEK_RTL8195AM": {
-        "supported_form_factors": ["ARDUINO"],
+    "MCU_RTL8195A": {
         "core": "Cortex-M3",
         "default_toolchain": "GCC_ARM",
-        "inherits": ["Target"],
-        "detect_code": ["4600"],
-        "extra_labels": ["Realtek", "AMEBA", "RTL8195A", "RTW_EMAC"],
         "macros": ["__RTL8195A__","CONFIG_PLATFORM_8195A","CONFIG_MBED_ENABLED","PLATFORM_CMSIS_RTOS","MBED_FAULT_HANDLER_DISABLED"],
-        "supported_toolchains": ["GCC_ARM", "ARM", "IAR"],
+        "inherits": ["Target"],
+        "extra_labels": ["Realtek", "AMEBA", "RTW_EMAC"],
         "device_has": ["ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SPI", "TRNG", "FLASH"],
+        "public": false,
+        "supported_toolchains": ["GCC_ARM", "ARM", "IAR"],
         "post_binary_hook": {
             "function": "RTL8195ACode.binary_hook",
             "toolchains": ["ARM_STD", "GCC_ARM", "IAR"]
@@ -4129,6 +4128,12 @@
             "network-default-interface-type": "WIFI"
         }
     },
+    "REALTEK_RTL8195AM": {
+        "supported_form_factors": ["ARDUINO"],
+        "inherits": ["MCU_RTL8195A"],
+        "detect_code": ["4600"],
+        "extra_labels_add": ["RTL8195A"]
+    },
     "VBLUNO51_LEGACY": {
         "supported_form_factors": ["ARDUINO"],
         "inherits": ["MCU_NRF51_32K"],