69d8c0bac3
Merge pull request #7429 from codeauroraforum/MXRT_Fix_AnalogIn
...
MXRT1050: Ensure the pins are in input mode for analogin
2018-07-06 11:24:40 -05:00
59defa29e9
Merge pull request #7406 from OpenNuvoton/nuvoton_fix_wakeup_delay
...
NANO130: Change PLL clock source to HIRC instead of HXT
2018-07-06 11:20:40 -05:00
19b6ef2e87
MXRT1050: Ensure the pins are in input mode for analogin
...
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2018-07-05 17:23:07 -05:00
c24d158fb4
MIMXRT1050_EVK: Move clock enable after check of pin
...
Enable clock could return an error if pin is NC
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2018-07-05 10:59:00 -05:00
9f27672f0f
Merge pull request #7420 from codeauroraforum/Fix_MXRT_GPIO_IRQ
...
MIMXRT1050_EVK: Fix the GPIO IRQ number assignements
2018-07-05 10:51:02 -05:00
4942ec540c
Merge pull request #7413 from mikaleppanen/wiced_removed_def_inst
...
Modified Wiced drivers EMAC instance get
2018-07-05 10:42:41 -05:00
917dc8394c
Merge pull request #7405 from marcuschangarm/fix-nrf52-target
...
Fix target definition for NRF52 series
2018-07-05 10:41:55 -05:00
8b6dfc4050
Merge pull request #7401 from marcuschangarm/fix-nrf52-irq
...
Fix interrupt initialization for NRF52 series
2018-07-05 10:41:20 -05:00
3faedca1cf
Merge pull request #7390 from jeromecoutant/PR_TWO
...
DISCO STM32L4 : Add TWO_RAM_REGIONS macro
2018-07-05 10:39:31 -05:00
513960f17d
Merge pull request #7386 from evva-sfw/feature/make_clock_src_changeable
...
Make clock source changeable over mbed_app.json for EFM32-Targets
2018-07-05 10:39:11 -05:00
1941906f72
Merge pull request #7376 from bcostm/dev_leds_disco_L496ag
...
DISCO_L496AG: change LED1 and LED2 pins
2018-07-05 10:37:57 -05:00
9b48f3978a
MIMXRT1050_EVK: Fix the GPIO IRQ number assignements
...
Use the GPIO_Combined IRQ array
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2018-07-04 11:53:47 -05:00
a838cb21d1
save/restore timer registers before/after deepsleep
2018-07-04 16:44:00 +02:00
9523bcf8c9
Use elapsed time only for 16bit timer
2018-07-04 16:43:21 +02:00
fcdd529f89
Re-enable IT CC1 after deepsleep
2018-07-04 10:16:32 +02:00
f785c23e89
HAL_GetTick returns elapsed time
2018-07-04 10:16:31 +02:00
26cb388d14
Use us_ticker_read while SDK is not ready
2018-07-04 10:15:15 +02:00
83a82d31e0
Modified Wiced drivers EMAC instance get
...
Removed EMAC get_default_instance() since WLAN drivers are not default EMAC drivers.
Moved EMAC static declaration inside get_instance().
2018-07-04 09:44:28 +03:00
13fec628d0
[NANO130] Change PLL clock source to HIRC instead of HXT
...
This change is to reduce delay of wake-up from power-down to pass Greentea test.
Because HIRC's accuracy is worse than HXT's, we must switch back to HXT for e.g. USBD application.
This can be done through setting NU_CLOCK_PLL to NU_HXT_PLL.
2018-07-03 15:37:53 +08:00
3f28fe2f54
Fix target definition for NRF52 series
...
* Removed RTC, NRF52840 doesn't support RTC API.
* Reorganized DEVICE_HAS order for NRF52832.
2018-07-02 16:58:33 -07:00
34dab4a4d9
LPC546XX: Fix UART mux setting in the LPCXpresso board
...
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2018-07-02 15:16:57 -05:00
a0224ed794
Fix interrupt initialization for NRF52 series
...
In some cases the UARTE interrupt would be enabled with pending
interrupts. This commit ensures that interrupts are only enabled
from a known state.
2018-07-02 11:13:50 -07:00
2353e7b1c6
Merge pull request #7029 from OpenNuvoton/nuvoton_5.9_ticker
...
Nuvoton: Adhere to reworked ticker spec to release with Mbed OS 5.9
2018-07-02 17:28:11 +02:00
44acaf587b
Merge pull request #7369 from marcuschangarm/fix-nrf52-serial
...
Fix race condition in serial_api.c for NRF52 series
2018-07-02 17:24:16 +02:00
40da60b959
DISCO STM32L4 : Add TWO_RAM_REGIONS macro
2018-07-02 14:03:05 +02:00
b6beb74d9d
DISCO_L496AG: update LEDs comments in PeripheralPins.c
2018-07-02 10:27:23 +02:00
a9ba4f9bf5
DISCO_L496AG: change LED1 and LED2 pins
2018-07-02 10:20:49 +02:00
9d9db81841
Make clock source changeable over mbed_app.json
...
By adding the missing include the clock source for EFM32-Targets is changeable over mbed_app.json.
2018-07-02 10:04:05 +02:00
2da597e56a
Merge pull request #7326 from bcostm/dev_lpuart1_clock_source
...
STM32: add lpuart_clock_source config
2018-06-29 20:09:09 -05:00
0c417ab8b7
astyle
2018-06-29 10:12:40 +02:00
58fa28b9b2
Merge pull request #7313 from mprse/NRF52840_ticker_width_fix
...
NRF_52840: Fix us ticker counter size
2018-06-29 10:10:40 +02:00
9be8541a30
STM32: add lpuart_clock_source config
...
Keep same clock configuration as done before this PR (LSE and PCLK1).
Use a JSON file to change it.
2018-06-29 10:10:29 +02:00
2d71866028
Fix typo in NRF52 series README.md
...
UART configuration parameters mispelled.
2018-06-28 16:38:29 -07:00
fc087ab32c
Fix race condition in serial_api.c for NRF52 series
...
* Elevate RTC2 interrupt priority to same level as UARTE to prevent
race condition on shared variables.
* Remove unused TXDRDY event code.
* Fix typo in macro.
2018-06-28 16:36:16 -07:00
3721ac44d2
STM32 serial RX/TX active patch
...
In serial_tx_active and serial_rx_active functions,
we check the internal state value with
HAL_UART_STATE_BUSY_TX = 0x21U,
HAL_UART_STATE_BUSY_RX = 0x22U,
It seems that value can also be :
HAL_UART_STATE_BUSY_TX_RX = 0x23U,
2018-06-28 18:05:52 +02:00
bf21bac52d
Merge pull request #7351 from jeromecoutant/PR_ASTYLE
...
STM32 files with MBED astyle rules
2018-06-28 10:06:03 -05:00
4f04ae489e
[Nuvoton] Synchronize lp_ticker code to us_ticker
...
This is to make us_ticker/lp_ticker code consistent.
2018-06-28 16:34:45 +08:00
1fa3374310
[Nuvoton] Remove special handling for dummy interrupt in lp_ticker
...
It is because dummy interrupt is very rare or pending time caused by it
is very short.
2018-06-28 16:27:37 +08:00
5bf483ee17
Merge pull request #7330 from KariHaapalehto/clean_up
...
Clean-up targets.json
2018-06-27 18:44:41 -05:00
faa31de72e
Merge pull request #7323 from marcuschangarm/fix-serial
...
Improve serial performance for NRF52 series
2018-06-27 18:43:43 -05:00
9966110dd9
NRF_52840: Fix us ticker counter size
...
It has been noticed that there is a problem with us ticker on NRF_52840 board after 32 bit counter has been used for us ticker on NRF52 family boards.
Currently NRF52 symbol is defined only for MCU_NRF52832 (not for MCU_NRF52840) and based on this symbol 16 or 32 bit counter is selected (16 bit for NRF51 family and 32 for NRF52 family).
Since MCU_NRF52840 defines NRF52840_XXAA and provides 32 bit counters, 32 bit counter should be selected also when NRF52840_XXAA symbol is defined.
2018-06-27 15:33:07 +02:00
78410e7032
TARGET_STM32L4 astyle
2018-06-27 14:46:00 +02:00
ecffec8336
TARGET_STM32L1 astyle
2018-06-27 14:44:37 +02:00
baf97d78aa
TARGET_STM32L0 astyle
2018-06-27 14:43:59 +02:00
e9d7128485
TARGET_STM32F7 astyle
2018-06-27 14:42:56 +02:00
f50720e2a4
TARGET_STM32F4 astyle
2018-06-27 14:42:28 +02:00
6df23ee841
TARGET_STM32F3 astyle
2018-06-27 14:32:10 +02:00
f9bd4768a5
TARGET_STM32F2 astyle
2018-06-27 14:31:31 +02:00
c8313901fb
TARGET_STM32F1 astyle
2018-06-27 14:31:04 +02:00
6066e68ec6
TARGET_STM32F0 astyle
2018-06-27 14:23:31 +02:00
433ba46132
TARGET_STM astyle
2018-06-27 14:21:07 +02:00
34abadc0f6
Cleaning MTB_USI_WM_BN_BM_22, MTB_ADV_WISE_1530 and MTB_MXCHIP_EMW3166 targets
...
These wiced targets are not supported at mbed-os 2 release, so removing
"2" from release_versions.
LWIP feature flag removed, since it isn't needed anymore.
EMAC removed from device_has_add, since it isn't needed with these targets.
"network-default-interface-type": "WIFI" has been added.
2018-06-26 14:31:26 +03:00
6f9c76c949
fix LED_RED mapping on NUCLEO_F429ZI
2018-06-26 16:22:28 +09:00
310a1fe318
[Nuvoton] Synchronize lp_ticker code to us_ticker
...
This is to make us_ticker/lp_ticker code consistent.
2018-06-26 13:47:30 +08:00
8e11ddf3b6
[Nuvoton] Fix trap in lp_ticker ISR with non-blocking "clear interrupt flag"
2018-06-26 13:47:29 +08:00
fe627cb722
[Nuvoton] Synchronize lp_ticker code to us_ticker
...
This is to make us_ticker/lp_ticker code consistent.
2018-06-26 13:47:27 +08:00
86e194d075
[Nuvoton] Reduce blocking code in lp_ticker
...
1. Introduce S/W interrupt enable/disable to reduce calls to TIMER_EnableInt/TIMER_DisableInt.
2. Allow dummy interrupt because clear interrupt flag is not synchronized.
3. Enable LPTICKER_DELAY_TICKS to make lp_ticker_set_interrupt non-blocking.
2018-06-26 13:47:26 +08:00
7caec46512
[NANO130] Adjust static/dynamic memory allocation for IAR toolchain to pass Greentea test
2018-06-26 13:47:23 +08:00
12792fde27
[NANO130] Fix CLK_Idle incorrectly enters into deep sleep mode
...
This can happen with CLK_PowerDown() called first and then CLK_Idle() called.
2018-06-26 13:47:22 +08:00
3f861425da
[Nuvoton] Meet new lp_ticker HAL spec (Mbed OS 5.9)
...
1. Add LPTICKER in device_has option of targets.json file.
2. Disable ticker interrupt in lp_ticker_init
3. Add lp_ticker_free
4. Enable interrupt in lp_ticker_set_interrupt
2018-06-26 13:47:17 +08:00
ebd93ba753
[Nuvoton] Meet new us_ticker HAL spec (Mbed OS 5.9)
...
1. Add USTICKER in device_has option of targets.json file.
2. Disable ticker interrupt in us_ticker_init
3. Add us_ticker_free
4. Enable interrupt in us_ticker_set_interrupt
2018-06-26 13:45:33 +08:00
6346ba87c0
Improve serial performance for NRF52 series
...
Time sensitive user callbacks are called through lowest priority
SWI handlers instead of the highest priority UART handler.
2018-06-25 17:15:40 -07:00
ddc709acec
Make serial_putc non-blocking for the NRF52 series
...
Previous implementation would block until character had been
completely sent, which is not what the API specifies.
2018-06-25 13:19:15 -07:00
a42f1d7a81
Remove whitespace from NRF52 serial_api.c
2018-06-25 13:16:11 -07:00
f3424da060
Merge pull request #7287 from SeppoTakalo/remove_feature_lwip
...
Remove FEATURE_LWIP
2018-06-25 11:23:15 -05:00
36ad12c403
Modify RAM size definition of ARMCC for GR-LYCHEE
...
I modified RAM size of ARMCC compiler for GR-LYCHEE.
In case of GR-LYCHEE, RAM size is 3M Byte(including Non-Cache area), but there was a typo at MACRO definition.
2018-06-25 15:44:01 +09:00
8e170ccbd1
Merge pull request #6925 from TomoYamanaka/feature-flashiap_bootloader
...
Support Flash iAP and Bootloader for GR-PEACH and GR-LYCHEE
2018-06-22 14:23:57 -05:00
d160cc6cd0
Merge pull request #7284 from KariHaapalehto/wise1530_usi22_support
...
Add binary drivers for MTB_USI_WM_BN_BM_22 and MTB_ADV_WISE_1530
2018-06-22 10:16:16 -05:00
24daf18044
Merge pull request #7105 from codeauroraforum/mxrt_add_ivt
...
MIMXRT1050: Update to EVK Rev B
2018-06-22 10:15:33 -05:00
446de6947a
Merge pull request #7145 from drahnr/master
...
NRF52: add a separate .nvictable section and allow .noinit to be used…
2018-06-21 23:32:22 -05:00
94c13c5362
Support Bootloader for GR-PEACH and GR-LYCHEE
...
The mainly changes is below:
- Update scatter file, linker file for bootloader support
- Update the file for RZ/A1 serial flash boot loader
- Add "device name" and "bootloader_supported" in targets.json
2018-06-22 10:40:45 +09:00
18a8eac72b
Support Flash iAP for GR-PEACH and GR-LYCHEE
...
The mainly changes is below:
- Add flash_api.c
- Add the definition of SPI multi I/O Bus controller that is used for flash access
- Add "FLASH" as device feature
- Add the macro regarding information of the incorporated Flash
- Add the processing to expand code to RAM
2018-06-22 10:40:45 +09:00
e8ec3614b0
Merge pull request #7291 from aqib-ublox/master
...
adding USTICKER label for C027
2018-06-21 18:23:07 -05:00
632892d355
MIMXRT1050: Update to EVK Rev B
...
1. Add the IVT header to the binary as this is required for boot up
This was earlier added by the DAPLink firmware. As it is no longer
handled in DAPLink, the header needs to be added inside mbed.
2. Update drivers
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2018-06-21 13:34:12 -05:00
0b8f46763a
Merge pull request #7220 from melvinvdb/fix_nrf5x_interrupt_pull_mode
...
Fix mbed::InterruptIn.mode() in NRF5x targets
2018-06-21 10:31:48 -05:00
8efe3b5bcd
adding USTICKER label for C027
2018-06-21 17:00:26 +05:00
124e15f196
NRF52: attempt to complete 86ce955d96 for ARMCC and IAR
2018-06-21 13:24:49 +02:00
699811be72
Add binary drivers for MTB_USI_WM_BN_BM_22 and MTB_ADV_WISE_1530
2018-06-21 12:15:53 +03:00
e4d1a9a85a
Remove FEATURE_LWIP. The LwIP stack is enabled on all builds now
...
Leave the FEATURE_LWIP enabled in build scripts so that it does
not break any builds.
Removed 'feature_add: ["LWIP"]' on all targets.
2018-06-21 11:00:00 +03:00
6cec180d0b
Fix SPI initialization for NRF52 series
...
New changes to Mbed error reporting in 5.9 exposed bug in SPI
driver where an instance was uninitialized twice which triggered
an ASSERT.
This fix keeps track of which instance has been initialized and
only calls uninit when it is safe.
2018-06-20 15:09:14 -07:00
84d6b79dec
Merge pull request #7172 from mprse/NRF5x_updates
...
Unify RTC, lp ticker, and us ticker for NRF51 and NRF52 series
2018-06-20 16:08:05 -05:00
c4113ae2f5
Merge pull request #7175 from jamesbeyond/fm_mbed_hal
...
Enable new HAL us_ticker API on fast model MPS2 platform
2018-06-20 12:58:18 -05:00
badb79ee4b
Merge pull request #7272 from KariHaapalehto/emw3166_driver_support
...
Add binary drivers for MTB_MXCHIP_EMW3166
2018-06-20 12:56:03 -05:00
5420c46486
Merge pull request #7271 from innovavn/lpc43xx_serial
...
Fix lpc43xx serial pin map compiling error
2018-06-20 09:04:05 -05:00
093b4f05a2
Merge pull request #7241 from LMESTM/Fix_DeepsleepStackUsage
...
STM32: Reduce HAL_deepsleep stack usage
2018-06-20 08:38:56 -05:00
cc1e4f0ff8
Merge pull request #7205 from bcostm/fix_hash_data_alignment
...
STM32: Fix data alignment issue in HASH function for F2, F7, L4
2018-06-20 07:55:57 -05:00
ea2f53b03f
Add binary drivers for MTB_MXCHIP_EMW3166
2018-06-20 12:42:08 +03:00
c64971c100
Fix lpc43xx serial pin map compiling error
2018-06-20 13:59:48 +07:00
e8005f6d72
Merge pull request #7206 from mikaleppanen/k64f_async_powerup
...
K64f non-blocking powerup
2018-06-19 21:49:37 -05:00
567689c725
Merge pull request #7259 from SeppoTakalo/default_wifi
...
Provide default WiFi interfaces for Ublox and Realtek
2018-06-19 21:46:45 -05:00
81adafb5a7
STM32: Reduce HAL_deepsleep stack usage
...
There are cases where a call hal_deepsleep would overflow the idle task
stack, especially in developper or debug profile.
In order to avoid this case, we split ForceClockOutofDeepSleep
into two separate functions the two structure RCC_ClkInitStruct and
RCC_OscInitStruct are not allocated at the same time.
2018-06-19 17:32:00 +02:00
31df3d2865
Merge pull request #7242 from davidsaada/david_uniform_text_region
...
Rename text region in ARM linker file for a few NXP CPUs
2018-06-19 09:45:23 -05:00
b4726cbca5
Provide default WiFi interface for Ublox EVK ODIN W2
2018-06-19 16:40:55 +03:00
e2d3769211
Provide default WiFI interface for REALTEK_RTL8195AM
2018-06-19 16:40:54 +03:00
c964f2ee66
Merge pull request #7226 from juhoeskeli/wise_1570_app_start
...
Make MTB_ADV_WISE_1570 respect MBED_APP_START & enable bootloader
2018-06-19 14:12:07 +02:00
97c9925e8a
Merge pull request #7249 from maximmbed/fix-file-name-warning
...
Maxim: Rename files to fix warning
2018-06-19 14:11:21 +02:00
4986daaa7d
- Fixed coding style
...
- Set default pull mode to PullNone in gpio_irq_init
2018-06-19 13:11:31 +02:00
02d7d25850
us_ticker_set_interrupt: fix bit-shift operation
2018-06-19 08:55:35 +02:00
80fabcb125
Use lp_ticker.c for NRF51 and NRF52 boards
2018-06-19 08:47:06 +02:00
4a8de084b9
Use common_rtc.h for NRF51 and NRF52 boards
2018-06-19 08:47:05 +02:00
Cruz Monrreal
Mahesh Mahadevan
bcostm
Mika Leppänen
ccli8
Marcus Chang
Martin Kojtal
jeromecoutant
PHST
Przemyslaw Stekiel
Kari Haapalehto
Boting Ren
TomoYamanaka
aqib nasim
Bernhard Schuster
Seppo Takalo
canhkha
Laurent MEUNIER
Melvin van den berg