2a1d12bcd4
Fix #940 - k64f a4/5 pinnames swap
2015-03-03 08:16:09 +01:00
38514db08e
Merge pull request #936 from jeremybrodt/issue934
...
Fix issue #934 : Handled condition when head is NULL.
2015-03-03 08:09:58 +01:00
4a184d980e
Made attach_rtc with disabled irqs
2015-02-28 12:21:55 +01:00
088b5c41a7
Merge pull request #937 from GustavWi/iar_mbed
...
IAR support: Fixed stack and heap sizes for MTS DRAGONFLY and MTS MDOT F...
2015-02-28 08:06:03 +01:00
6bc00fda8a
Improved handling of NULL condition.
2015-02-27 10:01:30 -06:00
d8df2f25d3
Set most of the targets to a fixed heap and stack ratio relative to ram. 1/4 of ram to heap and 1/8 of ram to stack. There are some exception where the ram is small and the target support an rtos, then the heap requires more than 1/4 of RAM
2015-02-27 12:57:45 +01:00
43d7f387ec
Merge pull request #933 from masaohamanaka/master
...
RZ/A1H - Modify to support GCC and Fix some bugs of driver.
2015-02-27 10:55:20 +01:00
db6792f7cc
Renamed sleep implementation file and added DEVICE_SLEEP #defines
2015-02-26 11:08:52 -06:00
96c0ae58f0
Added sleep and deepsleep for LPC11U68. Needs testing on board
2015-02-26 10:44:47 -06:00
35258ff16b
IAR support: Fixed stack and heap sizes for MTS DRAGONFLY and MTS MDOT F411RE
2015-02-26 16:46:42 +01:00
b53b67ecad
Issue #934 : Handled condition when head is NULL.
2015-02-26 08:50:09 -06:00
74220c7896
Correct the formatting of #if.
2015-02-26 19:46:02 +09:00
d7bc024a6a
Fix a bug that Ticker driver has the potential to loop infinitely.
...
Ticker driver has the potential to loop infinitely.
Because, running "us_ticker_irq_handler()" from "us_ticker_set_interrupt()" before "obj->next = p;" of "us_ticker_insert_event()" is executed.
2015-02-26 16:36:30 +09:00
2047acae11
Fix a bug that Serial driver would read 1Byte garbage data(0xFE).
...
Serial driver would read 1Byte garbage data(0xFE) at first after reset and start.
2015-02-26 16:36:04 +09:00
0365977217
Modify and add a file to support GCC. (mbed common codes)
2015-02-26 16:35:45 +09:00
f6f45026f6
Modify to support GCC. (mbed CMSIS HAL)
2015-02-26 16:35:12 +09:00
ed293575cf
Modify to support GCC. (mbed HAL driver)
2015-02-26 16:33:01 +09:00
7020c50c56
Added function to get the timestamp of the next us_ticker event.
2015-02-24 14:25:43 -06:00
1b2a62100a
Merge pull request #905 from Willem23/master
...
LPC81x - Update us_ticker.c, using MRT
2015-02-24 13:36:38 +00:00
7ae7dafa66
Merge pull request #906 from Willem23/patch-1
...
LPC812 - pwmout HAL implementation
2015-02-24 13:36:01 +00:00
f0d04f5360
[API] Added option to modify RTC source
...
Initially from Karls question here:
http://developer.mbed.org/questions/6337/setTime-and-time-exported-with-__weak-fo/#answer6545?compage=1#c15936 .
Currently the C time functions only work with internal RTC. Sometimes
you either want to use an external one, or your target does not even
have an internal RTC. I added function attach_rtc(...) where the default
functions can be overridden at runtime.
2015-02-22 13:19:02 +01:00
2de26e779e
Update nRF51822.sct
...
FIx copy paste error in RAM size when softdevice isn't used
2015-02-20 23:41:20 -06:00
86041dd398
Merge pull request #923 from mazgch/master
...
enable the additional uart 7&8 of the STM32F439 in the mbed sdk/api
2015-02-20 17:54:15 +00:00
1641dd7e8d
enable the additional uart 7&8 of the STM32F439
2015-02-20 13:38:11 +01:00
9241e5eaba
Update us_ticker.c
...
Used precomputed variables to replace runtime mult and div in us_ticker_read().
2015-02-19 15:09:18 +01:00
31f66c22e5
mbed header file - mbed lib revision - 94
2015-02-16 17:04:27 +00:00
15ee1ca2dc
Fix for #908 , exit req std namespace
2015-02-16 10:11:54 +00:00
ed7e114d66
LPC11U68 build support extended to ARM toolchain, uvision export template added
2015-02-13 21:02:16 +05:30
fba1390241
Merge pull request #891 from AppNearMe/master
...
Add support for LPC11U34_421 and AppNearMe's MicroNFCBoard
2015-02-12 14:30:08 +00:00
e03fb2793f
Merge pull request #908 from adamgreen/exitMoveToRetarget
...
Move exit() to retarget.cpp
2015-02-12 13:10:17 +00:00
4a7b7d067d
Merge pull request #887 from Marcomissyou/master
...
Modify 32MHz crystal setting for NRF51822, overrides file for DFCM-NNN40 target
2015-02-12 12:57:45 +00:00
cb2269fe13
[ SSCI824 ] enabling onboard Oscillator
...
changing flag to use onboard 12MHz oscillator
2015-02-12 12:46:37 +00:00
06495658ce
Move exit override to retarget.cpp
...
I moved the exit handler from exit.c to retarget.cpp where the rest of
the standard C library retargetting routines are found. The exported
makefiles already explicitly link in retarget.o but not exit.o
When building with the GNU toolchain, it is safest to link in the
object file directly for retargetting routines so that GNU linker has
to use these versions of the routines.
Testing:
I have only tested this change with GCC_ARM. It should really be
tested with more toolchains before getting merged.
2015-02-12 00:14:26 -08:00
2f2f4d67bc
Update objects.h
...
Added PWM object.
2015-02-11 22:42:35 +01:00
7bd12f26f7
Update LPC8xx.h
...
Updated LPC_MRT_TypeDef for new us_ticker implementation on LPC812.
2015-02-11 22:37:15 +01:00
81e67758fa
Update device.h
...
Activated the I2CSlave functions. Slave block read/write operations are fully supported. The slave byte read and writes need general modification to I2CSlave.cpp. See pending Issue.
Activated the PWM functions. They are supported now using the SCT after updating us_ticker() to use the MRT instead of the SCT.
2015-02-11 19:52:20 +01:00
d9bd50c37e
Create pwmout_api.c
...
Added PWM support for the LPC812 using the SCT. Code was ported from LPC824 libs.
First needed to modify us_ticker() to free up the SCT and use the MRT instead.
PWM can support a maximum of 4 channels using any portpin. All channels will use the same period.
2015-02-11 19:47:04 +01:00
e270779ae1
Update us_ticker.c
...
Using MRT instead of SCT, needed to free up SCT for PWM
Code ported from LPC824 libs
2015-02-11 19:35:44 +01:00
eeba514435
Added extra linker scripts
2015-02-11 16:18:56 +00:00
fb4a7f7a58
Fixed issue #903 IAR linker nrf51 rtos
2015-02-11 16:10:18 +01:00
2d66553f14
remove comment
2015-02-11 17:44:20 +08:00
89de5390fb
Merge remote-tracking branch 'upstream/master'
2015-02-11 16:49:54 +08:00
b17246c6ea
edit license of mbed_overrides.c
2015-02-11 16:47:42 +08:00
cef6954740
Merge pull request #881 from Willem23/master
...
I2CSlave support for lpc812
2015-02-11 08:22:09 +00:00
9a0ed7db7c
Update copyright year
2015-02-10 11:21:05 +00:00
4aca0d439f
Merge remote-tracking branch 'upstream/master'
2015-02-10 10:45:11 +08:00
3aff0e7c9f
Update I2CSlave.cpp
...
Removed comments again regarding need for dedicated i2c_slave_byte_read() and i2c_slave_byte_read(). This issue is captured in "I2c - slave should have own write/read functions (#896 )"
2015-02-09 19:52:59 +01:00
408837f212
Merge branch 'stm32f0xx_reorg_hal' of https://github.com/ohagendorf/mbed into ohagendorf-stm32f0xx_reorg_hal
...
Conflicts:
libraries/mbed/targets/hal/TARGET_STM/TARGET_NUCLEO_F070RB/gpio_object.h
2015-02-09 09:26:51 +00:00
8607b74ab8
Merge pull request #892 from xiongyihui/master
...
Replace target name 'ble_smurfs' with 'seeed_tiny_ble'
2015-02-09 08:59:02 +00:00
aeeed2d050
Merge pull request #876 from NitinBhaskar/master
...
Initial ethernet support for LPC433x
2015-02-09 08:40:47 +00:00
d5e43ff5b5
Targets - K22 - fix issue #758 - vectors number + allocation
2015-02-09 08:23:42 +00:00
cb35cab5a4
replace target name 'ble_smurfs' with 'seeed_tiny_ble'
2015-02-07 10:14:26 +08:00
1e098305ef
Update device.h
...
Disabled DEVICE_I2CSLAVE option for LPC812 until the dedicated i2c_slave_byte_read() and i2c_slave_byte_write() functions have been added for all platforms.
2015-02-06 21:14:19 +01:00
83d87140aa
Update I2CSlave.cpp
...
Added comments regarding the need for dedicated i2c_slave_byte_write() and i2c_slave_byte_read() functions.
2015-02-06 21:11:29 +01:00
662d5a5d41
Added support for NXP LPC11U34_421 and AppNearMe MicroNFCBoard
2015-02-06 18:33:38 +00:00
245789dad2
Added USB interrupts handling in GCC_ARM toolchain for LPC11UXX micros
2015-02-06 18:32:34 +00:00
eee73e82e2
solve conflict in system_nrf51822.c
2015-02-06 17:14:37 +08:00
43081555a3
modify #if defined(TARGET_HRM1017) || defined(TARGET_DELTA_DFCM_NNN40) in system_nrf51822.c
2015-02-06 11:34:08 +08:00
2ffec3246f
modify system_nrf51822.c for fix HRM1017 and mbed_overrides.c for 32MHz setting
2015-02-06 10:42:28 +08:00
9b4470823b
Update system_nrf51822.c
...
Fixed support for mbed HRM1017.
It had been broken Feb.27th.
2015-02-06 02:44:01 +09:00
f41e6b5ac1
Merge pull request #883 from GustavWi/iar_mbed
...
Added IAR support for NRF51822. IAR's linker can not merge hex files
2015-02-05 13:39:38 +00:00
5356a00770
Update system_LPC8xx.c
...
Fixed SystemCoreClock calculation for LPC810 (same as for LPC812). Added MainClock variable for serial_api.
Added comments for PLL calculation. Note that SystemCoreClock for LPC810 is still 24MHz rather than rated 30MHz.
2015-02-04 20:53:28 +01:00
61d1204e05
Added IAR support for NRF51822. IAR's linker can not merge hex files as a section only binarys. I added a binary under TARGET_NORDIC/TARGET_MCU_NRF51822/TOOLCHAIN_IAR that represents the soft_device. I added support in the python scripts to also copy binaries to the build/mbed dir and also added support for the exporter to copy binaries from resources into the exported zip file.
2015-02-04 11:29:31 +01:00
c8f933ba07
Merge pull request #878 from mazgch/master
...
UBLOX_C029 - new target based on STM32F439
2015-02-04 09:19:31 +00:00
c565c72dd1
Update I2C Slave for lpc812
...
The dedicated I2C Slave byte read and byte write functions need to be called
from 'common' mbed I2CSlave API for devices that have separate Master and
Slave engines such as the lpc812 and lpc1549.
2015-02-03 21:49:50 +01:00
90c1ccb0af
Update i2c_api.h
...
Added i2c_slave_byte_read() and i2c_slave_byte_write() for devices such as the lpc812, lpc824 and lpc1549 that have separate I2C engines for Master and Slave functions.
2015-02-03 21:43:10 +01:00
eb9b8cdb8b
Enabled I2CSlave
2015-02-03 21:40:07 +01:00
7045d12363
Added I2C Slave functions
...
Added support for I2C Slave block read, block write and byte read and write. The slave address can be set and the general call address is automatically enabled. Note that the lpc812, lpc824 and lpc1549 have the same I2C engine. This new engine is very different from the lpc1768 and other NXP mbeds. The newer engine has separate controls for Master and Slave functions and they can be enable at the same time. Note that currently the lib does not support multi-master (arbitration lost is not handled).
2015-02-03 21:39:04 +01:00
134a67aab2
mbed header file - mbed lib revision - 93
2015-02-03 15:24:20 +00:00
252d7c8da1
Merge pull request #1 from mbedmicro/master
...
Add support for EA LPC4088_DM
2015-02-03 12:13:03 +01:00
5bd982c171
Targets - gpio_is_connected() for STM targets where it was not implemented
2015-02-02 15:22:55 +00:00
c53fab9e3c
Merge pull request #875 from masaohamanaka/master
...
RZ_A1H - Add some function and fix some bugs.
2015-02-02 11:24:46 +00:00
9f80c90477
Merge pull request #866 from Marcomissyou/master
...
Add a new target DELTA_DFCM_NNN40
2015-02-02 07:25:54 +00:00
0682571c5b
add module pin comments
2015-02-01 18:11:26 +01:00
3e17cacc76
fixed peripheral/port names and pin list
2015-02-01 17:51:52 +01:00
c11f753afc
comment fixed
2015-02-01 16:49:39 +01:00
f7b083a0b9
added new C029 target with STM32F439ZI
2015-02-01 16:38:06 +01:00
b6885d122a
extended the year in the license
2015-01-30 13:34:03 +05:30
0c8d8000ac
Merge pull request #870 from Willem23/master
...
Fix and enable the PLL for the LPC812
2015-01-30 08:13:45 +01:00
64465b68ad
extend year and add toolchain system_nrf51822.c, PinNames.h,device.h,mbed_overrides.c,targets.py
2015-01-30 15:05:03 +08:00
9cbe36213c
Modify A/D convert time.
2015-01-30 11:17:22 +09:00
2825871e18
[DISCO_F051R8] reorg hal folder
2015-01-29 23:53:29 +01:00
d4b4dce1fd
[NUCLEO_F030R8] reorg hal folder II
2015-01-29 23:52:45 +01:00
aadd0bcb13
[NUCLEO_F030R8] reorg hal folder
2015-01-29 23:51:48 +01:00
2942309fd4
[NUCLEO_F091RC] reorg hal folder
2015-01-29 23:51:46 +01:00
babf0ff9cf
[NUCLEO_F072RB] reorg hal folder
2015-01-29 23:48:09 +01:00
ef6437350d
[NUCLEO_F070RB] reorg hal folder
2015-01-29 23:36:08 +01:00
d03329fb3f
Update serial_api.c
...
Fix and enable the PLL for the LPC812. Removed unnecessary comments
2015-01-29 20:33:22 +01:00
898b4ab772
Update system_LPC8xx.h
...
Fix and enable the PLL for the LPC812. Removed unnecessary comments
2015-01-29 20:32:08 +01:00
b2cc8227f1
Update system_LPC8xx.c
...
Fix and enable the PLL for the LPC812. Removed unnecessary comments
2015-01-29 20:30:43 +01:00
0cc5d40a62
Initial ethernet support for LPC433x
2015-01-29 22:20:44 +05:30
232821bb99
add SWIO setting in mbed_overrides.c to substitute SWIO setting in system_nrf51822.c
2015-01-29 16:00:36 +08:00
60f875ac8b
Modify gpio api to make consistent with Merge branch 'PrzemekWirkus-pinology'.
2015-01-29 16:41:56 +09:00
8013d15876
Modify ticker driver to make consistent with Pull Reqest#839 and #864 .
...
timestamp_t type had been changed from uint64_t to uint32_t by Reqest#839 and #864 .
2015-01-29 16:41:35 +09:00
4d371d2c9e
Add include mbed_assert.h.
2015-01-29 16:41:08 +09:00
88604ff8fe
Add some processing of I2C driver
...
Changes are as below
- Add STOP condition omission processing of I2C Master
- Add I2C Slave processing
2015-01-29 16:40:16 +09:00
44b4fb4b41
Modify some processing of AnalgIn.
...
Modifies are as below.
- Change the A/D conversion time to run fast.
- Change the macro value of ANALOGIN_MEDIAN_FILTER
1 -> 0
2015-01-29 16:38:48 +09:00
83712b1f83
Add Serial flow control and fix a bug that parity setting is wrong.
...
Modifies are as below.
- Add flow control
- Change the range of baud rate that can be set in the baud function.
8138 bps more -> 128 bps more
- Fixed a bug that designation of parity had been reversed in format().
2015-01-29 16:38:21 +09:00
25131013bd
Add RTC function.
...
User can use set_time() and time() by this addition.
2015-01-29 16:37:41 +09:00
3612f38897
Merge pull request #873 from jrjang/master
...
Include missing header file in BusXXX classes
2015-01-29 08:21:47 +01:00
04937dc38b
remove json, delete toolchain list in target.py because NNN40 is inherit from NRF51822, add SWIO default setting in system_nrf51822.c and SWIO,VERF pin in PinName.h
2015-01-29 13:46:58 +08:00
9cdef7e725
Merge pull request #872 from bcostm/master
...
NUCLEO_F303RE - Corrections in ADC
2015-01-28 12:13:10 +01:00
7ee7fab4ee
Include missing header file
...
MBED_ASSERT was defined in mbed_assert.h.
Signed-off-by: Jun-Ru Chang <jrjang@gmail.com>
2015-01-28 18:57:19 +08:00
46317484f7
[NUCLEO_F303RE] Corrections in ADC
...
- remove unavailable ADCs and channels
- correct initialization routine
2015-01-28 11:06:44 +01:00
fd82a674ab
Update serial_api.c
...
Fixed the incorrect clocksource for the baud generator. Should be MainClock instead of SystemCoreClock. This also allows the correct use of the PLL for MainClock and SystemCoreClock without breaking the serial baudrate.
2015-01-27 21:04:17 +01:00
6fefefa3bb
Update system_LPC8xx.c
...
LPC812 was running at 12MHz on IRC. Added and fixed PLL activation to change the clockspeed into the expected 30MHz. Clock source is still the IRC. Selecting the 12 MHz XTAL clocksource should also work with the PLL.
Added MainClock to fix wrong setting of SystemCoreClock and allow the serial_api to use the correct clock.
2015-01-27 21:00:01 +01:00
74cd948470
Update system_LPC8xx.h
...
Added extern MainClock to allow the use of the PLL and correct the wrong clock source for serial_api.c
2015-01-27 20:48:51 +01:00
453e81fd4c
Merge branch 'pinology' of https://github.com/PrzemekWirkus/mbed into PrzemekWirkus-pinology
...
Conflicts:
libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_DISCO_F401VC/cmsis_nvic.c
2015-01-27 14:15:48 +01:00
48aed8e75f
remove DFCM_NNN40 PinMap_ADC
2015-01-27 15:34:33 +08:00
8c14c0600d
Merge pull request #853 from mstevanovic/nucleo103_gpio_irq
...
Targets - Gpio irq hal with max num of irq for Nucleo 103RB
2015-01-27 08:14:29 +01:00
f578ea38f7
delet rtc_api.c
2015-01-27 15:07:57 +08:00
c1bba47649
Merge pull request #862 from Willem23/master
...
I2C blockread and blockwrite fixed for LPC812
2015-01-27 08:07:28 +01:00
7b4f177cdb
remove older target
2015-01-27 14:56:59 +08:00
4a52c80ef5
solve conflict targets.py and i2c_api.c
...
Merge remote-tracking branch 'upstream/master'
Conflicts:
libraries/mbed/targets/hal/TARGET_NORDIC/TARGET_MCU_NRF51822/i2c_api.c
workspace_tools/targets.py
2015-01-27 14:16:17 +08:00
ea2a3c27a0
Assigned a value to pin variable
2015-01-26 21:47:28 +01:00
1fca34a068
HAL - NRF51822 - us ticker fix for the #839
...
There was a project header file which does not exist in mbed SDK, neither
some defines used from it most probably. This commit reverts those parts.
2015-01-26 15:32:14 +01:00
e979bd60eb
Merge pull request #839 from rgrover/master
...
switching timestamp_t back to 32-bits.
2015-01-26 15:13:08 +01:00
8c50826562
Removed extra checks for operator[] and replaced them with MBED_ASSERT for cleaner code
2015-01-26 08:47:44 +00:00
2c2ab2cb06
Merge pull request #861 from NitinBhaskar/master
...
On-Board SD Card support for LPC11U37H_401 board
2015-01-26 06:46:38 +00:00
3b7d9635b7
I2C blockread and blockwrite fixed for LPC812
...
Quick fix of block read and write. The i2c_start is still wrong: it
should setup the address before initiating a Start condition. Status
read is also wrong in i2c_do_read.
2015-01-24 20:59:01 +01:00
19fd60321b
On-Board SD Card support added, SD Card related test cases updated too
2015-01-24 22:57:01 +05:30
627714908d
Removed the mbed_mac_address override as it is not needed on the LPC4088_DM
2015-01-24 12:33:02 +01:00
66a5f716e3
modify i2c_api, analog_api, system_brf51822.c, targets/py and add device.h, PinNames
2015-01-23 16:40:26 +08:00
cb36f2c472
[NUCLEO_F303RE] Update SetSysClock function
2015-01-22 11:10:09 +01:00
4a2f3e00fe
Fixed review comments
2015-01-21 10:22:02 +01:00
cbebd63a2c
Added LPC4088_DM HAL
2015-01-21 10:19:35 +01:00
b223f83441
Updated gpio irq hal with max num of irq
...
- EXTI lines 5 to 9
- EXTI lines 10 to 15
2015-01-20 21:40:05 +01:00
8fe645ecd1
Merge branch 'master' of https://github.com/mbedmicro/mbed
2015-01-20 13:14:59 +01:00
5e57cd3d29
[NUCLEO_F303RE] Add GCC_ARM toolchain
2015-01-20 13:10:22 +01:00
0ab8d2e6b3
Merge pull request #844 from masaohamanaka/master
...
RZ_A1H - Implement some USB functions and fix some bugs about USBHost common codes.
2015-01-19 14:25:26 +00:00
befdc7ae6b
Merge pull request #847 from ytsuboi/master
...
LPC1114 - remove reset pin name to protect people. [LPC824] I2C pin names were crossed
2015-01-19 12:54:52 +00:00
5c5232c36a
Merge pull request #850 from NitinBhaskar/master
...
Initial support for LPC11U37H_401
2015-01-19 12:52:04 +00:00
f38d985cc8
Initial support for LPC11U37H_401
2015-01-17 13:29:17 +05:30
c1307163b3
Fixes to get LPC4330 GCC based builds to run
...
I was getting Hard Faults in even the simplest of samples before I made
these fixes.
* WaitUs() did nothing on optimized builds. I added the volatile
qualifier to the cyc variable to make sure that the delay loop
doesn't get optimized out.
* I removed the #ifdef which skipped the fpuInit() call when building
with GCC.
2015-01-16 15:58:55 -08:00
5b8a42ffe9
[LPC824] I2C pin names were crossed
2015-01-17 01:33:22 +09:00
7c55ec9590
[LPC1114] remove reset pin name to protect people.
...
If user set P0_0 as DigitalOut and set it to low, LPC1114 will be in
reset condion. To avoid this situation, p4, xp4 and dp23 was removed
from PinNames.h.
2015-01-17 00:41:17 +09:00
e21c65041d
New platform - Teensy 3.1
2015-01-15 19:18:01 +00:00
7726496957
Implement some USB functions to RZ-A1H
...
Implemented functions as below.
- USB Host
- USB Device(Full speed)
2015-01-15 14:00:42 +09:00
fb2ed14768
[NUCLEO_F303RE] Correct ADC initialization
...
Same as #809
2015-01-12 16:30:05 +01:00
7a3d2b4423
Merge pull request #837 from bcostm/master
...
NUCLEO_F070RB - Update tests
2015-01-12 08:14:44 +00:00
47725f9123
Merge pull request #835 from masaohamanaka/master
...
RZ_A1H - Fix some bugs about InterruptIn, SPI, I2C and modify some settings.
2015-01-12 08:14:02 +00:00
c8b9b9c2f5
add a declaration for the signed version of timestamp_t; used in a comparison
2015-01-12 07:58:31 +00:00
f7a78073e8
add 1 to the scheduler-op pool to allow deleting a timer whilst in its handler.
...
Please note that this commit goes with another recent commit to the nRF51822 repository which updated values under projectconfig.h. Please remember to update nRF51822 as well.
This has a bearing on issue #832 .
2015-01-09 13:19:55 +00:00
e7a9c01708
update us_ticker_appTimerRunning after a call to app_timer_stop()
2015-01-09 12:43:18 +00:00
c18633dcf2
switching timestamp_t back to 32-bits.
...
The underlying us_tickers used for comparison are still 32-bits; keeping a 64-bit timestamp isn't going to be useful.
fixes #838
2015-01-09 12:42:55 +00:00
321f012f06
[NUCLEO_F070RB] Add missing line (same as F072RB)
2015-01-09 11:32:49 +01:00
4004624a1f
Add comments.
...
Add comments to provide details about this code.
2015-01-09 13:50:41 +09:00
2acefb66eb
Merge pull request #809 from bcostm/master
...
NUCLEO_F334R8 - Fix issue with multiple ADC initialization
2015-01-08 11:57:52 +00:00
bef46907fc
Merge pull request #831 from ohagendorf/stm32f4xx_reorg_hal
...
STM32F4xx reorganisation of hal folder
2015-01-08 11:53:03 +00:00
90cf47ffdf
Fix some bugs about IntreruptIn.
...
Bugs are as below.
- Add terminal setting of IRQ4 and IRQ6 that leaked.
- When set the interrupt function by rise()/fall(), the interrupt disable state will be released by disable_irq().
- Interrupt will be continued to occur when execute disable_irq() after rise(NULL)/fall(NULL) set.
- Fix the setting timing of PMC register.
2015-01-07 19:11:14 +09:00
f119a368e5
Fix the bug that a noise will occur in SPI.
...
A noise will occur when execute frequency() after set the "mode" to 3 by format().
2015-01-07 19:10:49 +09:00
b13b047a76
Implement a stop condition transmission setting function of I2C.
...
User can specify the sending of STOP condition by this implement.
2015-01-07 19:10:26 +09:00
808c3b4d7c
Take measures about optimization problems of web compiler.
2015-01-07 19:09:22 +09:00
0ed93c1953
Update scatter file to increase usable RAM area.
...
Remove a usable RAM area limit of RW and ZI area.
2015-01-07 13:04:49 +09:00
d068a2b479
Replaced const define with hardcoded bus size of 16
2015-01-06 08:42:49 +00:00
7d54c82331
* Changed Bus operator[]() parameter from unsigned int to int to match mbed code
...
guidelines.
* Uncommented assertions in operators and added check for operator[] index < 0.
* Moved one operator from private to public, this was a typo thing.
2015-01-06 08:33:24 +00:00
716c51d232
Deleting doubled files
2015-01-06 00:35:57 +01:00
f5c3b18d75
[NUCLEO_F091RC] adding exporter (gcc_arm, coide), enable rtos
...
- Adding exporter for CoIDE and GCC_ARM
- Adding target to RTOS lib
2015-01-05 22:55:18 +01:00
5ebdb92e78
[NUCLEO_F072RB] adding target to rtos lib
...
Every test (DTCT_1, EXAMPLE_1, MBED_xx, RTOS_x) is OK.
2015-01-05 22:43:52 +01:00
f2a6eeca8d
[NUCLEO_F334R8] Correct the code used during initialization
2015-01-05 14:47:38 +01:00
ad9b6a7119
Merge branch 'master' of https://github.com/mbedmicro/mbed
2015-01-05 14:14:41 +01:00
914dd37b11
Merge pull request #818 from ohagendorf/stm32l053_rtos
...
DISCO/NUCLEO_L053xx - adding to RTOS, corrections for all tests, [DISCO_L053] exporter to µVision
2015-01-05 08:08:00 +01:00
e1309e658a
Merge pull request #811 from albert361/master
...
Add IAR toolchain support for DISCO_F429ZI
2015-01-05 07:57:36 +01:00
3aef1389d5
Merge pull request #829 from Kazu-zamasu/LPC824-GCC_CR
...
Tools: LPC824 - GCC_CR support
2015-01-05 07:55:21 +01:00
f98dd149b9
[MTS_MDOT_F405RG] reorg hal folder
...
- reorganisation of this target needed some extension of serial_api.c
used by all F4xx tagets.
- add arch_max to travis_build
2015-01-04 14:15:16 +01:00
0498e2619b
[STMF4xx] reorg hal folder
...
- some minor error correction
- add pin definition for 3 tests (MBED_A5,6,7)
- add new target disco_f401vc to travis_build
travis_build and all test are OK except missing STM32F4 target
MTS_MDOT_F405RG
2015-01-04 14:14:52 +01:00
3d886a94dc
[MTS_DRAGONFLY_F411RE] reorg hal folder
2015-01-04 14:11:32 +01:00
41975149c2
[DISCO_F407/ARCH_MAX] reorg hal folder
2015-01-04 14:11:03 +01:00
3a2ec50d0e
[DISCO_F429ZI] reorg hal folder
2015-01-04 14:10:34 +01:00
cf8c8689e6
[NUCLEO_F411][MTS_MDOT_F411] reorg of hal folder
2015-01-04 14:07:43 +01:00
484d9359ba
[DISCO/NUCLEO_F401xx] reorg of hal folder
2015-01-04 14:06:51 +01:00
b066ebff90
Add to GCC_CR
...
New create GCC_CR LPCXPresso export.
2015-01-04 12:02:01 +09:00
43e6502f00
[DISCO_F401VC] new target incl. exporter to gcc_arm and coide
2015-01-02 19:09:41 +01:00
ad6e208c7e
[DISCO_L053xx] RTC LSE/LSI problem
...
The mcu STM32L053C8 seems to have a problem in the RCC - LSE hardware
block. The Disco_L053 don't have a 32kHz crystal connected to LSE port
pins in contrast to NUCLEO_L053.
During initialization the HAL tests if it can start the LSE oscillator.
The Flag LSERDY in RCC_CSR is set to 1 by RCC clock control when the
oscillator runs stable. Without a crystal the flag shouldn't be set and
the HAL trys to start the internal LSI oscillator.
But the flag is always set to 1 also without a crystal. That's why the
RTC doesn't start.
2015-01-02 12:17:35 +01:00
32f5b97aa7
[DISCO_L053xx] wrong STDIO UART
...
Correction of a wrong stdio uart - some tests failed because of this.
2015-01-02 12:17:35 +01:00
0ac123d488
[DISCO/NUCLEO_L053xx] adding to RTOS
2015-01-02 12:13:44 +01:00
d198fba547
Merge pull request #821 from ohagendorf/exporter_coide_gccarm
...
NUCLEO/DISCO L053,F103,F100,F051 - adding exporter to gcc_arm and coide
2015-01-02 09:04:06 +01:00
7234182bfd
Merge pull request #817 from masaohamanaka/master
...
RZ_A1H - Modify frequency setting processing of SPI
2015-01-02 08:26:57 +01:00
77d645476d
Merge pull request #810 from ohagendorf/STM32F3xx_rtos
...
DISCO/NUCLEO_F3xx - solving RTOS problem
2015-01-02 07:48:54 +01:00
9af828a11f
Merge branch 'master' of https://github.com/mfiore02/mbed into mfiore02-master
...
Conflicts:
workspace_tools/build_travis.py
2015-01-02 07:12:11 +01:00
aaede9c070
[DISCO_F051R8] exporter to coide and a naming correction
...
In PeripheralNames.h the PWM timer name was wrong. Changed from TIMxx to
PWMxx.
2014-12-31 17:46:32 +01:00
020faf70e6
Fix icf settings for head and stack size
2014-12-30 22:55:11 +08:00
6126cb7b41
Modify frequency setting processing of SPI
...
In case of off-line compiler, there is no problem about the frequency setting processing.
But in case of online compiler, the frequency setting processing will be error.
So, modify frequency setting processing of SPI to pass in online compiler.
2014-12-26 17:40:42 +09:00
2f63fa7d78
Merge pull request #815 from toyowata/master
...
Targets: LPC4337 - Fix RTC clock setting issue
2014-12-25 19:35:15 +01:00
7b62e7d5d6
[LPC4337] Remove init variable for RTC
...
- Remove static variable for initialization check
- Add enabled flag check for RTC control register
2014-12-25 09:41:33 +09:00
44c66b1062
[LPC4337] Fix RTC clock setting issue
...
- Fixed missing RTC clock intialization code
- Confirm to pass RTC test case (MBED_16)
2014-12-24 18:09:47 +09:00
21b2445fad
Fix typo.
...
1AB -> 1AF
2014-12-24 11:18:35 +08:00
3fdeca703c
Fix NVIC memory region and rtos verified
...
1. Add NVIC region in icf file.
2. Increase STACK and HEAP size.
3. mBed rtos is verified.
2014-12-24 11:16:26 +08:00
a1653f2708
Fix KL05Z GCC_ARM linker script
...
Issue originally reported on mbed site here:
https://developer.mbed.org/questions/5695/FRDM-KL05z-hardfault-when-compiled-with-/
The RAM base address was incorrectly set to the beginning of RAM
instead of at a 0xC0 byte offset to reserve room for the interrupt
vectors. Without this fix, the global variables and the interrupt
vectors were occupying the same space in RAM once the user enabled the
timer interrupt.
The user who originally reported the issue on the mbed site has tested
this fix and verified that it corrected the hard fault issue that they
were encountering.
2014-12-23 19:03:09 -08:00
282c31f57e
Add IAR toolchain support for DISCO_F429ZI
2014-12-23 14:41:20 +08:00
e48aabed4c
[DISCO/NUCLEO_F3xx] solving RTOS Problem
...
- add targets (except DISCO_F303VC) to tests.py - RTOS_x tests
- a minor bug fix for DISCO_F334: had wrong STDIO_UART_TX/RX pin
settings
2014-12-22 16:58:42 +01:00
ef626d7f68
[NUCLEO_F334R8] Fix issue with multiple ADC initialization
2014-12-22 11:04:02 +01:00
4dd46fd82a
Merge branch 'master' of https://github.com/mbedmicro/mbed
2014-12-22 08:40:08 +01:00
56e7514495
Modiffied _ns_mack member's comment in Bus classes (BusIn, BusOUt, BusInOut)
2014-12-19 14:59:06 +00:00
8690af3b7b
Simple indent
2014-12-19 14:53:35 +00:00
11c5955959
Simple indent
2014-12-19 14:48:39 +00:00
7720989e20
Added operator[] and mask() function to BusInOut
...
This change follows changes in BUsIn and BusOUt API
2014-12-19 14:45:32 +00:00
db7e92853b
Added mask() function to BusIn and BusOut components
...
You can use BusIn::mask() or BusOut::mask() to get binary mask of all connected and NC pins in bus
2014-12-19 14:37:00 +00:00
c4fc8e68eb
Added operator[] for BusIn and BusOut to add access to particular bit in random-iterator fashion
2014-12-19 14:06:46 +00:00
6fa4b469f4
Decorated all HALs with gpio_is_connected() function implementation
2014-12-19 13:37:16 +00:00
a53cd59b51
Added is_connected() method to Digital I/O classes APIs (DigitalIn, DigitalOut and DigitalInOut
2014-12-19 13:31:54 +00:00
b7f4d17aae
Added new GPIO HAL function gpio_is_connected() used to check if gpio_t is connected or initialized with NC
...
Simple gpio_t structure in TARGET_KPSDK_MCUS field name changed to allign to other HALs
2014-12-19 13:14:53 +00:00
03f49ea8ef
[NUCLEO_F0] Align registers and system files with latest CMSIS files
...
Same as in new NUCLEO_F070RB target
2014-12-19 14:13:54 +01:00
bd803e5944
Merge pull request #805 from molejar/dev-freescale-kl43z
...
Targets: KL43Z - Fix some issues in serial, usb device and pins names
2014-12-19 11:10:08 +00:00
1eb8d7cab4
Added serial_get_src_clock() function into serial_api.c and fastirc_frequency() function into clk_freqs.h for better portability.
2014-12-19 10:55:37 +01:00
79ec104b3c
Merge pull request #801 from bcostm/master
...
Add new target - NUCLEO_F070RB
2014-12-19 09:48:14 +00:00
078c36b1c5
Merge pull request #802 from masaohamanaka/master
...
Targets: RZ_A1H - Fix some drivers bugs and modify some settings of OS and
2014-12-19 08:53:10 +00:00
e8f8f5ef6b
Merge pull request #803 from mazgch/master
...
fix HAL_NULL, add more GPIO_CLK macros
2014-12-19 08:32:48 +00:00
bb969921ec
Fixed baudrate calculation issue in serial_api.c, arduino compatible pins name and USB device for Freescale KL43Z Target
2014-12-18 22:37:11 +01:00
992afded5c
fix HAL_NULL, add more GPIO_CLK macros
2014-12-18 16:11:40 +01:00
0279c2a2ee
Modify some settings of OS and Ether
...
- Change default setting of CMSIS-RTOS RTX for Cortex-A9 to align with Cortex-M.
- Change the interrupt priority of Ether driver to align with other drivers.
2014-12-18 18:41:33 +09:00
e91e953a60
Fix some drivers bugs.
...
Changes as below.
-I2C
Change communication wait time and Frequency accuracy improvement of I2C.
- Frequency accuracy improvement
- Changed the wait time between one communication completed and the next communication start.
The wait time will be Low clock width by this changing.
-PWM
Modify processing of pulsewidth() of PWM
- Modify processing of pulsewidth() to match the specifications of the RZ_A1H.
-SPI
Fixed a bug that SPI driver is not able to communicate when transfer bit length is 16bit or 32bit.
- Frequency accuracy improvement
- Modify transfer processing when transfer bit length is 16bit or 32bit.
-Serial
Change the reference register macro of Serial
- Change the reference register macro to align with other driver codes.
2014-12-18 18:40:44 +09:00
6234082237
[NUCLEO_F070RB] Add new target - part 2 hal
2014-12-18 09:29:13 +01:00
796482d826
[NUCLEO_F070RB] Add new target - part 1 cmsis
2014-12-18 09:28:22 +01:00
97089befb4
[STM32F0] Update STM32Cube driver to support new devices
2014-12-18 09:26:02 +01:00
8d2fa50691
add new target BLE_SMURFS
2014-12-17 11:40:09 +08:00
2ef2204380
solving RTOS problem
...
Changing original STM Cube Driver to call _start instead of main to
initialise the rtos when using it. Without using rtos the behavior is
the same as before.
2014-12-17 01:18:56 +01:00
67fbbf0b63
Merge pull request #798 from rgrover/master
...
Targets: nrf51 - updating app_timer.c from Norid'c SDKv7.1.0
2014-12-16 08:14:11 +00:00
a67faf521f
Merge pull request #797 from ohagendorf/DISCO_F429_clockcycle
...
Targets: DISCO_F429ZI - clock frequency additions
2014-12-16 08:01:54 +00:00
7eb385ec41
[DISCO_F429ZI] changed clock settings
...
Correction of wrong comments.
2014-12-15 22:37:37 +01:00
429ff2731d
[mbed][MTS_DRAGONFLY_F411RE] fix reversed uart pins after rebasing from master
2014-12-15 15:05:07 -06:00
29bd94927e
updating app_timer.c from Norid'c SDKv7.1.0; hoping to fix the hangs reported around timers
2014-12-15 15:59:48 +00:00
6172cbea1a
Merge pull request #785 from rosterloh/disco_l053_hal_updates
...
Targets: DISCO_L053C8 - update from nucleo latest changes
2014-12-15 09:15:42 +00:00
1fb5426bf6
Merge pull request #793 from ohagendorf/STMF4xxx_rtos
...
DISCO_F4xx, NUCLEO_F4xx, MDOT_F4 - fix RTOS problem (init seq)
2014-12-15 09:01:35 +00:00
fb526c9205
Merge pull request #784 from masaohamanaka/master
...
Targets: RZ_A1H - Add the timer value wraparound processing to us_ticker
2014-12-15 08:55:35 +00:00
5aafaa0d63
Merge pull request #780 from GustavWi/iar_mbed
...
IAR: skip dynamic initialization, new common IAR startup file
2014-12-15 08:52:35 +00:00
2002b797ad
[DISCO_F429ZI] changed clock settings
...
Original STM32Cube F4 driver sets SYSCLK for STM32F429 to 16MHz. This
adds a 168MHz and 180MHz configuration to system_stm32f4xx.c generated
by STM32CubeMX code generator. The rtos clock configuration is changed
too. In singletest.py run everything is OK.
2014-12-15 07:32:53 +01:00
6f8f626bd6
[DISCO_F4xx][NUCLEO_F4xx][MDOT_F4] solving RTOS problem
...
- Changing original STM Cube Driver to call _start instead of main to
initialise the rtos when using it. Without using rtos the behavior is
the same as before.
- Adding DISCO_F429 to rtos
- Adding targets to RTOS_xx tests.
- All tests are OK. Tested with Nucleo and Disco boards. Not tested with
MDOT_F4 but that uses the same hal like nucleo_f411.
2014-12-13 22:50:02 +01:00
3212848c31
Fix a bug that coding mistakes of L2 cache
...
Coding mistakes as below.
while(PL310->INV_WAY && ((1 << assoc) - 1)); ->
while(PL310->INV_WAY & ((1 << assoc) - 1));
PL310->INTERRUPT_CLEAR = 0; ->
PL310->INTERRUPT_CLEAR = 0x000001FFuL;
2014-12-12 14:27:01 +09:00
8e3b9aba75
Add terminal defines of PWM and fix a bug that period can not be changed.
...
Fix a bug as below.
- Period can not be changed.
Restructions: 1. The upper limits is 491us
2. Change all period of the same channel when changing period.
2014-12-12 14:26:33 +09:00
fc7e246596
Remove needless processing regarding Interrupt.
...
EOIR writing will be done in IRQ handler.
EOIR writing is needless in each interrupt processing.
2014-12-12 14:25:41 +09:00
7417e1061d
Add some terminal setting of Serial and modify attach sequence.
...
Fix some bugs of Serial as below.
- TX/RX terminal of XBee(P7_4, P7_5) setting is reverse.
- P5_6 and P5_7 terminals can not be used.
- Tx interrupt will not occur at the right timing.
- There are no settings of WIFI Module terminals(P11_10,P11_11).
- There are no settings of Xbee Module terminals(P6_6,P6_7).
2014-12-12 14:25:08 +09:00
22a3c528c8
[mbed][MTS_DRAGONFLY_F411RE] remove old Dragonfly Directory
2014-12-11 14:02:13 -06:00
883215c80e
Merge branch 'dev_new' into dev
...
Conflicts:
workspace_tools/export/iar.py
workspace_tools/targets.py
2014-12-11 13:54:19 -06:00
743bf2b255
[mbed][MTS_DRAGONFLY_F411RE MTS_MDOT_F411RE NUCLEO_F411RE] remove unnecessary Dragonfly hal files & move PeripheralNames.h to mDot and Nucleo dirs to perserve differences from Dragonfly
2014-12-11 13:48:06 -06:00
83d03f35e5
[mbed][MTS_DRAGONFLY_F411RE] move Dragonfly support into TARGET_STMF411RE with rest of 411 products
2014-12-11 13:38:29 -06:00
4ade9b7ac3
[mbed][MTS_DRAGONFLY_F411RE] fix D2 pin mapping, remove PWM_OUT from PinNames.h
2014-12-11 13:20:45 -06:00
ff0b8fce30
[cmsis][MTS_DRAGONFLY_F411RE] set USE_PLL_HSE_EXTC to 0, causing problems with IAR export and we have no external clock option
2014-12-11 13:20:45 -06:00
2a5c204fa2
[mbed][MTS_DRAGONFLY_F411RE] fix pin names for spi to external flash
2014-12-11 13:20:45 -06:00
4b1ac52d91
[mbed][MTS_DRAGONFLY_F411RE] change wrong PLL members to correct values from ST Cube code
2014-12-11 13:20:45 -06:00
7a217c3fb5
[mbed][MTS_DRAGONFLY_F411RE] remove unnecessary VIMPINNAMES file
2014-12-11 13:20:45 -06:00
340b40ff1a
[mbed][MTS_DRAGONFLY_F411RE] add RADIO_TX/RX pins, correct reversed TX/RX pins for uart6
2014-12-11 13:20:45 -06:00
f41a29e14c
[mbed][MTS_DRAGONFLY_F411RE] clean up PinNames.h
2014-12-11 13:20:45 -06:00
6d9d5961c5
[mbed][MTS_DRAGONFLY_F411RE] fix stdio uart decl, fix D3 pin decl, change blinky test main.cpp back to original
2014-12-11 13:20:45 -06:00
546005a72c
[mbed][MTS_DRAGONFLY_F411RE] added platform support files and dirs built gcc executable NOT working
2014-12-11 13:20:45 -06:00
77c3fe2358
updated latest changes from nucleo
2014-12-11 14:55:45 +00:00
c08208fe4f
Update upstream pushed files
2014-12-11 19:26:03 +09:00
54999646a1
[NUCLEO_L053R8] Removed call to Systick (mbed RTOS compliancy)
2014-12-11 11:16:02 +01:00
1970328da3
Add the timer value wraparound processing to us_ticker
...
Timer value wraparound operation had not been considered in us_ticker.
So, User could not set upper than 128s to argument of wait().
2014-12-11 19:07:50 +09:00
f71b0a06c7
Revert "Add the timer value wraparound processing to common wait processing"
...
This reverts commit cd8f65c94b
2014-12-11 18:21:43 +09:00
0xc0170
Sissors
Jeremy Brodt
GustavWi
Brian Daniels
Masao Hamanaka
Sam Grove
mazgch
Wim
nitin.bhaskar.27.09@gmail.com
K4zuki
Adam Green
Donatien Garnier
Marcomissyou
Yihui Xiong
Takafumi Naka
Anders Lindvall
ohagendorf
Jun-Ru Chang
bcostm
milangit
Przemek Wirkus
Willem23
ytsuboi
Paul Staron
Rohit Grover
kazu-zamasu
albert361
Toyomasa Watarai
Martin Olejar
Mike Fiore
vincent rabbit
Richard Osterloh