ARMmbed
/
mbed-os
mirror of https://github.com/ARMmbed/mbed-os.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
26,929 Commits
52 Branches
336 Tags
624 MiB
Commit Graph

5832 Commits (mbed-os-5.14)

Author SHA1 Message Date
Kyle Kearney 0a54b6900e Update to latest HAL 
- Add const and static qualifiers in places where they are
  applicable but missing
- Remove headers for drivers that aren't implemented yet
- Misc minor bugfixes
 2019-10-16 11:53:52 +01:00
Kyle Kearney 02da070162 Fix incorrect integer division in analogout_read 
Replace with multiplication by the floating point reciprocal, to
 produce a floating point result while being more efficient than
 floating point division.
Addresses the issue raised by kjbracey-arm in
https://github.com/ARMmbed/mbed-os/pull/11324#pullrequestreview-282433989
 2019-10-16 11:53:52 +01:00
James Wang 318f686ffc remove NRF52840, NRF52832 static_memory_defines set 
static_memory_defines controls the macro MBED_RAM_START AND MBED_RAM_SIZE
when nrf52840 to use softdevice, it need MBED_RAM_START to set the true application ram start

default static_memory_defines is true, so just remove NRF52840 and NRF52832's set
 2019-10-16 11:53:52 +01:00
James Wang 1bed555921 set NRF52832 static_memory_defines true 
static_memory_defines controls the macro MBED_RAM_START AND MBED_RAM_SIZE
when nrf52832 to use softdevice, it need MBED_RAM_START to set the true application ram start
 2019-10-16 11:53:52 +01:00
int_szyk 7411db1deb Change the LSI_VALUE according to documentation 2019-10-16 11:53:52 +01:00
jeromecoutant c9f7798df5 STM32WB ADC : Consecutive VBAT values reading was not possible 
Add Stop after read
 2019-10-16 11:53:52 +01:00
Kostiantyn Tkachov 7dc92567f9 Updated mbedTLS CRYPTO target to be more flexibly configured for supported boards 2019-10-16 11:53:52 +01:00
jeromecoutant 74a24ea88d STM32H747 license update 2019-10-16 11:53:52 +01:00
jeromecoutant 39e890d330 Remove "STM32H747ZI" device_name, as not supported yet by MBED 2019-10-16 11:53:52 +01:00
jeromecoutant 2008be1c0d DISCO_H747I single core M7 introduction 2019-10-16 11:53:52 +01:00
jeromecoutant 46b310304a STM32H747xI introduction 2019-10-16 11:53:52 +01:00
jeromecoutant 08fe757f14 STM32H743 files move 2019-10-16 11:53:52 +01:00
Michal Paszta b65e5e84df Enable async serial for K66F 
Added DMA definitions and usage for UART, based on K64F's code.
 2019-10-16 11:53:52 +01:00
jeromecoutant 0f12e65b9c STM license file update 
Some code have been copied from ST Cube deliveries.
ST copyright is then needed.
 2019-10-16 11:53:52 +01:00
Kostiantyn Tkachov 5c3da11e83 Removed mbedTLS hardware support from FUTURE_SEQUANA targets 2019-10-16 11:53:52 +01:00
Kostiantyn Tkachov b191e6a84a Initial commit to add mbedTLS hardware acceleration for Cypress chips to mbed-os sources 2019-10-16 11:53:52 +01:00
Chun-Chieh Li ef8474de46 M263: Remove redundant SPI I2S pins from pinmap 
The pins suffixed with 'I2SMCLK' are for SPI I2S and cannot be used in normal SPI.

This is also to fix FPGA CI test mbed_hal_fpga_ci_test_shield-spi.
 2019-10-16 11:53:52 +01:00
Chun-Chieh Li 0722380f9a M263: Free up peripheral pins in peripheral free-up HAL API 
Without free-up of peripheral pins, peripheral pins of the same peripheral may
share by multiple ports after port iteration, and this peripheral may fail with
pin interference.
 2019-10-16 11:53:52 +01:00
Chun-Chieh Li 863c2a7700 M263: Support GPIO input pull-high/pull-low 
In Nuvoton, only new-design chips support GPIO input pull-high/pull-low modes.
Targets not supporting this feature are listed below:

- NUMAKER_PFM_NANO130
- NUMAKER_PFM_NUC472
- NUMAKER_PFM_M453
 2019-10-16 11:53:52 +01:00
Chun-Chieh Li 826ad091a3 M263: Fix redundant call to UART IRQ handler 
Honor RxIrq/TxIrq to avoid redundant call to UART IRQ handler.

This is also to fix FPGA CI test mbed_hal_fpga_ci_test_shield-uart.
 2019-10-16 11:53:52 +01:00
Chun-Chieh Li 950a586ad1 M263: Fix redundant SPI clock generation 
Fix SPI clocks are generated redundantly at the end of transfer.

This is also to fix FPGA CI test mbed_hal_fpga_ci_test_shield-spi/
SPI - async mode.
 2019-10-16 11:53:52 +01:00
Chun-Chieh Li 8cd1f10b25 M263: Fix I2C NACK error 
Fix logic error on replying NACK at the end of transfer.

This is also to fix FPGA CI test mbed_hal_fpga_ci_test_shield-i2c/
i2c - test single byte read i2c API.
 2019-10-16 11:53:52 +01:00
Chun-Chieh Li d6172f0227 M263: Fix IP initialization sequence 
Better IP initialization sequence:
1. Configure IP pins
2. Select IP clock source and then enable it
3. Reset the IP (SYS_ResetModule)

NOTE1: IP reset takes effect regardless of IP clock. So it doesn't matter if
       IP clock enable is before IP reset.
NOTE2: Non-configured pins may disturb IP's state, so IP pinout first and then
       IP reset.
NOTE3: IP reset at the end of IP initialization sequence can cover unexpected
       situation.
 2019-10-16 11:53:52 +01:00
Chun-Chieh Li 668d3b077e M263: Exclude USB UART from testing 
USB UART is dedicated to USB COM and so must exclude from FPGA CI testing.
 2019-10-16 11:53:52 +01:00
Chun-Chieh Li 99cbd6fe3c M263: Force enum PinName to 32-bit 
NU_PINNAME_BIND(...) requires enum PinName to be 32-bit to encode module
binding information in it.
 2019-10-16 11:53:52 +01:00
dolphin\\gena 6176f066f4 formatting 2019-10-16 11:53:52 +01:00
dolphin\\gena 8d734ee055 bad formatting correction 2019-10-16 11:53:52 +01:00
dolphin\\gena 495ba7b92c indents correction 2019-10-16 11:53:52 +01:00
dolphin\\gena 13c202b828 rename macro 2019-10-16 11:53:52 +01:00
Martin Kojtal a35663b171 ST pinmap: remove endif mistype 2019-10-16 11:53:52 +01:00
Martin Kojtal 908e7a3e9f ST pinmap: Fix the style 2019-10-16 11:53:52 +01:00
dolphin\\gena 8e9511e435 formatting 2019-10-16 11:53:52 +01:00
dolphin\\gena 954552a7d1 fix mistypes 2019-10-16 11:53:52 +01:00
dolphin\\gena 7bc2aae435 formatting issue 2019-10-16 11:53:52 +01:00
dolphin\\gena e8be6505c4 mistype fix 2019-10-16 11:53:52 +01:00
dolphin\\gena f84a2df116 Add pin speed controlling interface 2019-10-16 11:53:52 +01:00
Chun-Chieh Li 1366602ca7 M263: Enlarge LPTICKER_DELAY_TICKS for safe 
On Nuvoton targets, lp_ticker_set_interrupt(...) needs around 3 lp-ticker
ticks to take effect. It may miss when current tick and match tick are very
close (see hal/LowPowerTickerWrapper.cpp). Enlarge LPTICKER_DELAY_TICKS to
4 from 3 to address this boundary case.
 2019-10-16 11:53:52 +01:00
int_szyk c138ef8baa Change LSI_VALUE in STM implementation. 
Wrong LSI value might be causing problems witch watchdogs.
 2019-10-16 11:53:52 +01:00
Chun-Chieh Li c21f34823b M263: Fix mbedmicro-rtos-mbed-systimer/Wake up from deep sleep failing 
This test requires total latency (tot = h/w + s/w) (wakeup from deepsleep) be
under 1ms. To check the issue, measure total latency on Nuvoton targets:

TARGET      EXP(us)     EXP+TOL(us) ACT(us)
NANO130     42000       43000       42939
NUC472      42000       43000       42236
M453        42000       43000       43274
M487        42000       43000       42877
M2351       42000       43000       43213

Checking h/w spec, h/w latency (wakeup time from normal power-down mode) on
M487/M2351 is just 1us (n/a on other targets). S/W latency plays the major
part here.

S/W latency relies on system performance. On Nuvoton targets, 'LPTICKER_DELAY_TICKS'
possibly complicates the test. Anyway, to pass the test, add extra 1ms latency
(deep-sleep-latency) in targets.json for Nuvoton targets.
 2019-10-16 11:53:52 +01:00
Tony Wu 6b75945eaa rtl8195am - remove redundant code 
Signed-off-by: Tony Wu <tonywu@realtek.com>
 2019-10-16 11:53:52 +01:00
Tony Wu 5ae55c26d1 rtl8195am - fix array assumed to have one element warning 
Signed-off-by: Tony Wu <tonywu@realtek.com>
 2019-10-16 11:53:52 +01:00
Tony Wu 3345548adc rtl8195am - fix argument format warning 
[Warning] tcm_heap.c@70,18: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'MemChunk * {aka struct _MemChunk *}' [-Wformat=]
[Warning] tcm_heap.c@70,28: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'MemChunk * {aka struct _MemChunk *}' [-Wformat=]

Signed-off-by: Tony Wu <tonywu@realtek.com>
 2019-10-16 11:53:52 +01:00
Tony Wu a168aabdd0 rtl8195am - fix missing braces around empty body warning 
osdep_service.c@214,61: suggest braces around empty body in an 'else' statement [-Wempty-body]

Signed-off-by: Tony Wu <tonywu@realtek.com>
 2019-10-16 11:53:52 +01:00
Tony Wu 82c5e24d8f rtl8195am - cleanup gcc linker script 
Signed-off-by: Tony Wu <tonywu@realtek.com>
 2019-10-16 11:53:52 +01:00
Tony Wu 6b0275f9bb rtl8195am - disable IAR support 
Disable IAR support until HAL library is upgraded to IAR8

Signed-off-by: Tony Wu <tonywu@realtek.com>
 2019-10-16 11:53:52 +01:00
Tony Wu 1c015bc54a rtl8195am - enable USTICKER support 
Signed-off-by: Tony Wu <tonywu@realtek.com>
 2019-10-16 11:53:52 +01:00
adbridge 59209d2883 "Update secure binaries for ARM_MUSCA_A1_S (ARMC6)" 2019-09-19 11:54:41 +01:00
adbridge af682ccb1b "Update secure binaries for LPC55S69_S (ARMC6)" 2019-09-19 11:44:35 +01:00
Chun-Chieh Li 36fa1d0123 M2351: Add pre-built secure image for non-PSA 2019-09-19 11:23:52 +01:00
Chun-Chieh Li 656ee0d7a5 M2351: Enable USB UART for non-PSA secure target for Greentea 
NOTE1:  USB UART is partitioned for non-secure world. Secure world still can share
        it with limit that its interrupt cannot use in secure world.
NOTE2:  In secure world, USB UART is only for Greentea and STDIO. Developers shouldn't
        use it for other purposes.
 2019-09-19 11:23:52 +01:00
Chun-Chieh Li 2e2a340cec M2351: Support non-PSA secure/non-secure combined build 
Support secure/non-secure combined build for non-PSA target:
1.  In secure post-build, deliver built secure image to TARGET_NU_PREBUILD_SECURE
    directory which is to combine later.
2.  In non-secure post-build, merge non-secure image with secure image saved in
    TARGET_NU_PREBUILD_SECURE directory.
3.  In non-secure post-build, user can also drop pre-built secure image saved in
    TARGET_NU_PREBUILD_SECURE directory and provide its own by adding the line below
    in mbed_app.json:
    "target.extra_labels_remove": ["NU_PREBUILD_SECURE"]
 2019-09-19 11:23:52 +01:00
Chun-Chieh Li f7c7c73bc2 M2351: Rename non-PSA target name to NU_PFM_M2351_NPSA_S/NS 
1.  Create a private target name NU_PFM_M2351_CM which stands for the
    NuMaker-PFM-M2351 board and is to be extended.
2.  NU_PFM_M2351_NPSA_S/NS target names for non-PSA secure/non-secure targets
    respectively.
3.  The original target name NUMAKER_PFM_M2351 is recycled and cannot be used.
    Use NU_PFM_M2351_S/NS for non-PSA secure/non-secure targets instead.

NOTE:   Target name doesn't follow the rule below because online database has
        limit of max 20 chars:

        NUMAKER_PFM_M2351_PSA/NOPSA_S/NS

        Instead, it has the rule:

        NU_PFM_M2351_[NPSA_]S/NS

        NU_PFM_M2351_S/NS for PSA targets. This is to be consistent with current
        PSA target naming. So the resolved target names are:

        NU_PFM_M2351_S          : PSA secure target
        NU_PFM_M2351_NS         : PSA non-secure target
        NU_PFM_M2351_NPSA_S     : Non-PSA secure target
        NU_PFM_M2351_NPSA_NS    : Non-PSA non-secure target
 2019-09-19 11:23:52 +01:00
Chun-Chieh Li ab742b05c9 M2351: Remove pre-built non-PSA secure image temporarily 
This will add back immediately after target renaming is done.
 2019-09-19 11:23:52 +01:00
Mahesh Mahadevan fc13550647 MCUXpresso: Update the MXRT Serial driver for MBED_TICKLESS 
We should not block in case the UART is busy transmitting. The
API has been updated to check the status of all UART's and return
1 in case any of them is busy transmitting.

Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
 2019-09-12 17:18:37 +01:00
Mahesh Mahadevan 71710318f7 MCUXpresso: Change the MXRT deep sleep implementation 
The code checks if any of the UART's is still transmitting.
If so then prevent from entering deepsleep

Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
 2019-09-12 17:18:37 +01:00
Mahesh Mahadevan 0206f48e04 MCUXpresso: Update the Kinetis Serial driver for MBED_TICKLESS 
We should not block in case the UART is busy transmitting. The
API has been updated to check the status of all UART's and return
1 in case any of them is busy transmitting.

Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
 2019-09-12 17:18:37 +01:00
Mahesh Mahadevan de6ce271bf MCUXpresso: Change the Kinetis deep sleep implementation 
The code checks if any of the UART's is still transmitting.
If so then prevent from entering deepsleep

Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
 2019-09-12 17:18:37 +01:00
Martin Kojtal 068a634f8f nrf52: fix removing additional config - was not there 2019-09-12 17:18:37 +01:00
Martin Kojtal c51d452de9 NRF52: fix config 
remove lib config and use target configuration instead. To avoid duplication of symbols, etc.

Fixes #10655
 2019-09-12 17:18:37 +01:00
Ryan Morse e0806c5626 Update PDL to latest 1.3 build 
Updates to documentation and personalities. No functional code changes.
 2019-09-12 17:18:37 +01:00
int_szyk c423602161 AStyle 2019-09-12 17:18:37 +01:00
int_szyk aeb15e9cce Fix problem with low level lp_ticker STM wrapper 2019-09-12 17:18:37 +01:00
adbridge 4640441900 "Update secure binaries for ARM_MUSCA_A1_S (ARMC6)" 2019-09-06 13:59:08 +01:00
adbridge c488b5ff57 "Update secure binaries for LPC55S69_S (ARMC6)" 2019-09-06 13:18:09 +01:00
jeromecoutant 55d60f3c25 Add USB support for DISCO_L4R9I 2019-09-03 16:43:05 +02:00
jeromecoutant fb8b503b1c STM32 targets: USBDEVICE support 2019-09-03 14:24:34 +02:00
jeromecoutant 425d63856c STM32L4 USB: remove EndpointAbort support 2019-09-03 14:23:05 +02:00
Martin Kojtal e001216b55
Merge pull request #11315 from Patater/psa-crypto-api-1.0b3 
Update Mbed OS for PSA Crypto API 1.0b3
 2019-09-03 09:20:15 +02:00
Jaeden Amero a848cd6987 psa: Update LPC55S69 and MUSCA_A1 TF-M binaries 
Rebuild the TF-M binaries for the LPC55S69 and MUSCA_A1 using the latest
service updates. This allows the boards to use the PSA Crypto API 1.0b3.
 2019-09-02 17:11:00 +01:00
Martin Kojtal 940d3fdf60
Merge pull request #11291 from LMESTM/STM32_OSPI_QSPI_fallback_support 
Stm32 ospi qspi fallback support
 2019-09-02 12:26:55 +02:00
Roman Okhrimenko 9780c9018e Disabled QSPI for now 2019-08-30 16:00:09 +03:00
Roman Okhrimenko c249bf97c2 Updated target files structure to align with the following BSP PR. 2019-08-30 15:10:19 +03:00
Roman Okhrimenko 515555e7ba Removed scripts for provisiongs from repository, made fixes per PR comments, adjusted Readme.md 2019-08-30 15:10:19 +03:00
Roman Okhrimenko 74e873a045 Updated README.md 2019-08-30 15:10:19 +03:00
Roman Okhrimenko 74c5ea6517 Updated BSD license file content. 2019-08-30 15:10:19 +03:00
Roman Okhrimenko 7e8d569261 Added example x.509 certificate for provisioning. 2019-08-30 15:10:19 +03:00
Roman Okhrimenko b8639a00ec Updated CyBootloader hexes. 2019-08-30 15:10:19 +03:00
Roman Okhrimenko 9d4a697207 Updated linker scripts and startup file for ARM - fixes tests-mbedmicro-rtos-mbed-heap_and_stack failure on ARM compiler. 2019-08-30 15:10:19 +03:00
Roman Okhrimenko 4db392c2f6 Updated licenses in files, mentioned in commnets to https://github.com/ARMmbed/mbed-os/pull/11046 2019-08-30 15:10:18 +03:00
Roman Okhrimenko b15d54f5bf Fixed IAR linker script. 2019-08-30 15:10:18 +03:00
Roman Okhrimenko ed9995e06c PSOC6_SB: Initial commit to add CY8CPROTO_064_SB to mbed-os sources. 2019-08-30 15:10:18 +03:00
Martin Kojtal 1c32e3ca5a
Merge pull request #11353 from kyle-cypress/pr/psoc-reserved-resources 
Add reserved resources metadata to Cypress BSPs
 2019-08-30 12:47:42 +02:00
Martin Kojtal 335f3ad7ea
Merge pull request #11355 from kyle-cypress/pr/psoc-serial-flash 
Initial support for Serial Flash on PSoC Devices
 2019-08-30 12:42:59 +02:00
Martin Kojtal 68054861e8
Merge pull request #11354 from kyle-cypress/pr/pdl-linker-script 
Update linker scripts based on latest PDL 1.3
 2019-08-30 07:10:32 +02:00
Ryan Morse d373cab5ab Initialize serial flash on device startup 2019-08-29 14:09:21 -07:00
Ryan Morse ee944cf850 Add serial flash implementation for PSoC 6 2019-08-29 14:08:56 -07:00
Martin Kojtal a65ed8c3d8
Merge pull request #11303 from jeromecoutant/PR_H743ZI2_480 
NUCLEO_H743ZI2 : increase system clock from 400 MHz to 480 MHz
 2019-08-29 17:10:06 +02:00
Hennadiy Kytsun bf00ebe409 Remove rom start/size macros when bootloader=true 
Allow the application to specify this depending on whether/how
it is using the bootloader and whether it requires a CM0+ image.
 2019-08-29 07:15:56 -07:00
Ryan Morse aaf641062c Update linker scripts based on latest PDL 1.3 2019-08-29 07:15:56 -07:00
jeromecoutant bb1388be8e NUCLEO_L4R5ZI: add QSPI_x definition 2019-08-29 14:17:33 +02:00
Martin Kojtal 8ef742a49c
Merge pull request #11370 from u-blox/ublox_odin_driver_os_5_v3.7.1_rc1 
Driver Updates + ARMC6 driver support + WIFI fixes
 2019-08-29 13:35:06 +02:00
jeromecoutant f13072490c NUCLEO_L4R5ZI : add OSPI pins for QSPI 2019-08-29 12:11:28 +02:00
Laurent Meunier 8401c2ea31 STM32: Few fixes and tidy-up in qspi_api 2019-08-29 11:17:46 +02:00
jeromecoutant be78084a8b NUCLEO_H743ZI and NUCLEO_H743ZI2: clock configuration cleanup 2019-08-29 10:52:24 +02:00
Martin Kojtal 453122944c
Merge pull request #11366 from 0xc0170/dev_rollup 
Rollup part 2 for 5.14
 2019-08-29 09:28:49 +02:00
Martin Kojtal 27571bc2d7
Merge pull request #11309 from NXPmicro/Fix_Kinetis_Spi 
MCUXpresso Kinetis SPI drive: Add a delay between CS assertion and first sclk edge
 2019-08-29 08:49:49 +02:00
aqib-ublox 7f36fbc86e Driver Updates + ARMC6 driver support + wifi fixes 2019-08-29 11:33:29 +05:00
Kyle Kearney 095e8dfbd9 Remove WATCHDOG from TARGET_SEQUANA 
This was added to TARGET_PSOC6 which TARGET_SEQUANA inherits from,
but TARGET_SEQUANA doesn't implement WATCHDOG
 2019-08-28 18:06:02 -07:00
Orest Akymyshyn 3898fed709 Update targets for Cypress Kits 
Enable QSPI and Watchdog
Define additional macros to enable more generic BSP code
Allow deep sleep latency to be set by configurator-generated code
 2019-08-28 10:56:15 -07:00
Ryan Morse 13f216d23d Fix LPA pin configuration for two Cypress Targets 
Fixes are for CY8CKIT_062S2_43012 and CY8CPROTO_062_4343W
 2019-08-28 10:56:15 -07:00
Kyle Kearney e8f325fe33 Update device startup code and linker scripts 
Only include the CM4 startup code and linker scripts with the target for each board.
 2019-08-28 10:56:15 -07:00
Kyle Kearney 8c2dec1233 Update board hardware configuration 
Include all configurator design files with each BSP
 2019-08-28 10:56:15 -07:00
Kyle Kearney 166325ac37 Move nested targets up one level 
For kit targets that inherit from a module, move the kit a top-level
target folder rather than nesting underneath the module folder, to
avoid too-long-path issues on Windows.
Note this only changes the folder layout, not the inheritance.
 2019-08-28 10:56:14 -07:00
Kyle Kearney 317f720b11 Move BSP design.modus/GenSrc into its own component 
Enables code examples/end user applications to override if necessary
Add BSP_DESIGN_MODUS component by default to all PSOC6 boards. Applications can remove this if necessary.
 2019-08-28 10:56:14 -07:00
Kyle Kearney 236bf2c0c3 Initialize timer for us_ticker at startup 
This avoids a stack overflow if sleep is called for the first time from
the idle thread (which by default has a fairly small stack, and which is
already fairly deep by the time it calls into the usticker adapter)
 2019-08-28 10:56:14 -07:00
Kyle Kearney ad6e833450 Enable SDIO DeepSleep Callback 2019-08-28 10:56:14 -07:00
Ryan Morse 0164ddcc80 Minor updates to BSP init for clarity 2019-08-28 10:56:14 -07:00
Kyle Kearney 85dd8d704b Clean up unnecessary doxygen comments 
Fix incorrect file names in a few headers
 2019-08-28 10:56:14 -07:00
Kyle Kearney d50145fd1d Comment about resource reservations in BSP Init 2019-08-28 10:56:14 -07:00
Kyle Kearney 0a1e64dd00 Register Sysclk PM callback in BSP Init 2019-08-28 10:56:14 -07:00
Kyle Kearney ced234607e Clean up common BSP implementation 2019-08-28 10:56:14 -07:00
Kyle Kearney e64fdba7fc Update BSP and WifiInterface for WHD Changes 2019-08-28 10:56:14 -07:00
Kyle Kearney 5d819ebc81 Initialize wifi SDIO during BSP init 2019-08-28 10:56:14 -07:00
Kyle Kearney d98fa7a569 Rename BSP header for easier moves between targets 2019-08-28 10:56:14 -07:00
Martin Kojtal 96d9a8fea9 Merge branch 'MX25LM51245G_QSPI_test_config' of git://github.com/LMESTM/mbed into dev_rollup 2019-08-28 18:37:17 +01:00
Martin Kojtal 104f9281c4 Merge branch 'I2C_SEQUENTIAL_COMMUNICATION_REWORK' of git://github.com/ABOSTM/mbed-os into dev_rollup 2019-08-28 18:36:53 +01:00
Martin Kojtal 31b65adf45 Merge branch 'master' of git://github.com/malavikasajikumar/mbed-os into dev_rollup 2019-08-28 18:36:40 +01:00
Martin Kojtal 7eb97be5a3
Merge pull request #11358 from 0xc0170/dev_rollup 
Rollup PRs for 5.14
 2019-08-28 16:39:36 +02:00
Martin Kojtal 67d1bb180b
Merge pull request #11319 from kyle-cypress/pr/whd-1.30-update 
Update WHD to 1.30.0
 2019-08-28 16:11:24 +02:00
Leon Lindenfelser 7063ccee9e Add PA6 to ADC PeripheralPins for MTS_DRAGONFLY_L471QG 2019-08-28 13:12:08 +01:00
Mahesh Mahadevan 695e930f09 KL43Z: Enable USBDevice 
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
 2019-08-28 13:12:04 +01:00
Marcelo Salazar 4d5bf75ae6 Fix ELMO_F411RE detect code 2019-08-28 13:12:03 +01:00
Martin Kojtal 2cfea4faba target TT_: fix compilation errors 
They define slave for spi, rtc but do not contain implementation - removing them.
Fixes #11143
 2019-08-28 13:12:03 +01:00
Martin Kojtal ae247b5645
Merge pull request #11326 from kyle-cypress/pr/psoc6-pdl 
Update PDL for Cypress Targets
 2019-08-28 12:30:37 +02:00
Martin Kojtal d7b5f759ae
Merge pull request #11324 from kyle-cypress/pr/psoc6-csp 
PSOC6: Update CSP to latest
 2019-08-28 10:07:44 +02:00
Martin Kojtal 7e0fb8fab9
Merge pull request #11293 from NXPmicro/K82F_Add_USBDevice 
K82F: Add USBDEVICE support
 2019-08-28 07:27:40 +02:00
Ryan Morse c611e76297 Update WHD to latest 1.30 build 2019-08-27 17:16:44 -07:00
Ryan Morse ac3951097f Update PDL to 1.3.0 final 2019-08-27 16:13:07 -07:00
Ryan Morse 5c899a3350 Bug fixes to interrupt/event handling in SDHC HAL 2019-08-27 15:29:32 -07:00
Malavika Sajikumar db0d3d21e6 Updating SDP-K1 PinNames.h file. 
- Removing LED pin definitions based on color.
- Removing and updating incorrect USB pin definitions.
- Adding comments for Arduino SPI and I2C pins.
 2019-08-27 15:24:08 -07:00
Shuopeng Deng 8ad377add3 Fix I2C handling of 1 byte external memory address 2019-08-27 15:10:34 -07:00
Ryan Morse 459666f8f2 Fixed issue in QSPI when there aren't 8 pins 2019-08-27 15:10:34 -07:00
Kyle Kearney 375221097c Update CSP to latest 
Update HAL adapter for interface changes
Misc minor fixes to HAL adapter
 2019-08-27 15:10:34 -07:00
Ryan Morse 5e2234f3e3 Add reserved resources lists to Cypress BSPs 
These provide information to allow Cypress graphical configuration tools
to avoid conflicting usage of hardware resources which are managed by
firware included with the BSP.
 2019-08-27 11:35:23 -07:00
Martin Kojtal 7e179f5beb
Merge pull request #11301 from jeromecoutant/PR_L4R 
STM32L4+ : increase system clock from 80 MHz to 120 MHz
 2019-08-27 09:49:09 +02:00
Kyle Kearney 33493b12d9 Update WHD clients for interface changes 2019-08-26 16:05:47 -07:00
Ryan Morse 66cf10f030 Update WHD to 1.30.0 2019-08-26 16:05:46 -07:00
Martin Kojtal 421ad37433
Merge pull request #11122 from OpenNuvoton/nuvoton_m263 
Support Nuvoton's new target NUMAKER_IOT_M263A
 2019-08-26 14:12:36 +02:00
Alexandre Bourdiol de121a308a Fix I2C issue with test mbed_hal_fpga_ci_test_shield 
On last case #5 there was a last unexpected read.
It happened when stop condition was generated
 2019-08-26 14:01:23 +02:00
Martin Kojtal 02d1873c06
Merge pull request #11266 from u-blox/feature_adc_temp_conf 
ADC internal temperature support and EMAC header fix
 2019-08-26 11:08:47 +02:00
Kyle Kearney 04aa0a6e9d Update PDL 2019-08-23 17:58:41 -07:00
Alexandre Bourdiol 7910de2f38 TARGET_STM: Fix I2C sequential communication 
Keep former behaviour for I2C V1.
For I2C V2:
Use only I2C_FIRST_FRAME, I2C_FIRST_AND_LAST_FRAME and I2C_LAST_FRAME,
thus we avoid using reload bit.
Reload suppose the next frame would be in the same direction,
but we have no guarranty about this. So we cannot use reload bit.
Note: in case of 2 consecutive I2C_FIRST_FRAME,
a restart is automatically generated only if there is direction change in the direction.
 2019-08-23 16:26:19 +02:00
cyliangtw 5a1a25abe0 Add MBED_FAULT_HANDLER_DISABLED into macros to avoid GCC issue 2019-08-23 21:53:01 +08:00
Martin Kojtal b786e68a6a
Merge pull request #11294 from NXPmicro/KL43_Add_Storage 
KL43Z: Enable FALSHIAP storage
 2019-08-23 15:43:19 +02:00
jeromecoutant 8cd00b3468 STM32L4: Add OSPI IP support in fallback QSPI mode 
For STM32 platforms that embed an OSPI IP, we're offering
a QSPI fallback support with this commit.

When OSPI is supported in mbed, we can consider adding full
OSPI support
 2019-08-23 15:18:48 +02:00
Mahesh Mahadevan 5af80db8b6 MCUXpresso Kinetis SPI drive: Add a delay between CS assertion and first sclk edge 
1. FPGA test shield requires at least half sclk period delay between
CS assertion and first sclk edge
2. Update Kinetis SPI drivers to match what is already done for K64F

Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
 2019-08-23 07:11:43 -05:00
aqib-ublox 1ab75d3759 adding internal ADC pin definition for MBED_CONNECT_ODIN and MBED_ODIN_W2 2019-08-23 15:46:15 +05:00
cyliangtw e57ed04252 modify acceptable license term of SDK drivres 2019-08-23 18:12:23 +08:00
cyliangtw 23267ba229 re-license files of M261 device folder to be Apache 2019-08-23 18:12:19 +08:00
cyliangtw 2b3fda91d3 Not disable MBED_FAULT_HANDLE by default after it supports Cortex-M23 2019-08-23 18:12:18 +08:00
cyliangtw 9d653af2cc re-license all of M261 hal files to be Apache 2019-08-23 18:12:16 +08:00
cyliangtw 99e1d0b49c M263 support GCC and IAR toolchain 2019-08-23 18:12:14 +08:00
cyliangtw c9006bd422 Support InterruptIn class in ci-test/pwm_rise_fall test case 2019-08-23 18:12:13 +08:00
cyliangtw d69e7c5613 Fix UNO pin map 2019-08-23 18:12:11 +08:00
cyliangtw 3164095cd6 M263: Fix channel release in analogout_free() 2019-08-23 18:12:10 +08:00
cyliangtw a62c877d0e M263: modify epwm-config-output 2019-08-23 18:12:09 +08:00
cyliangtw 2596b7c7be M263: Include cmsis core_m23.h for macro __CORTEX_M in M261.h 2019-08-23 18:12:07 +08:00
cyliangtw d52fced891 M263: Fix compile error on analogin/out & crypto-misc 2019-08-23 18:12:06 +08:00
cyliangtw b9a2e06a1a M263: delete 2 redundant files 2019-08-23 18:12:04 +08:00
cyliangtw e46cf83850 M263: Add Numaker-IoT-M263A target board 2019-08-23 18:12:02 +08:00
jeromecoutant 3e4592703d Create NUCLEO_H743ZI2 own target at 480 MHz 2019-08-23 10:33:08 +02:00
Martin Kojtal 14021eb4fe
Merge pull request #11268 from NXPmicro/Update_MCUXpresso_SDK_SPI 
Update MCUXpresso SDK SPI drivers
 2019-08-23 10:20:09 +02:00
Martin Kojtal edc59ced82
Merge pull request #11215 from chrissnow/LPC1768_Scatter 
LPC1768: Make use of the other 32K of RAM
 2019-08-23 10:18:21 +02:00
Martin Kojtal 48b5939b33
Merge pull request #11152 from OpenNuvoton/nuvoton_fpga-ci 
Nuvoton: Fix FPGA CI test failing
 2019-08-23 10:02:19 +02:00
Martin Kojtal b1aec797e2
Merge pull request #11282 from NXPmicro/K22_Add_Storage 
K22F: Add FlashIAP for storage
 2019-08-23 10:01:16 +02:00
Mahesh Mahadevan 6d736d8ce0 KL43Z: Enable FALSHIAP storage 
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
 2019-08-22 12:16:09 -05:00
Mahesh Mahadevan c249d5fd54 K82F: Add USBDEVICE support 
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
 2019-08-22 11:17:35 -05:00
Anna Bridge 7455b89603
Merge pull request #11280 from Tharazi97/stm_spi_api_memset_fill_truncated 
Tweak stm_spi_api Coverity warning.
 2019-08-22 17:11:19 +01:00
Mahesh Mahadevan a85f0824be MCUXpresso: Update EDMA drivers to fix warnings 
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
 2019-08-22 10:47:43 -05:00
Mahesh Mahadevan a184a86e90 MCUXpresso: Update the SDK LPUART drivers 
Use the latest driver from K66F

Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
 2019-08-22 08:26:11 -05:00
Mahesh Mahadevan bff287580c MCUXpresso: Update I2C SDK driver 
Use the K66F driver that has the latest

Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
 2019-08-22 07:48:29 -05:00
Mahesh Mahadevan 23bf7b74b0 MCUXpresso: Update SDK EDMA driver 
Update to the latest version from K66F

Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
 2019-08-22 07:48:29 -05:00
Mahesh Mahadevan 382696fc50 MCUXpresso: Use SDK API for spi_master_block_write 
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
 2019-08-22 07:48:28 -05:00
Mahesh Mahadevan 33b66ffa60 MCUXpresso: Update Kinetis SPI SDK drivers 
Added dummy data setup API to allow users to configure
the dummy data to be transferred.

Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
 2019-08-22 07:48:28 -05:00
Mahesh Mahadevan 4102114a72 MCUXpresso: Update Kinetis DSPI SDK drivers 
- Added dummy data setup API to allow users to configure
  the dummy data to be transferred.
- Added new APIs for half-duplex transfer function. Users
  can send and receive data by one API in the polling/interrupt/EDMA way,
  and they can choose either to transmit first or to receive first.
  Additionally, the PCS pin can be configured as assert status in
  transmission (between transmit and receive) by setting the
  isPcsAssertInTransfer to true.
- Fix for MISRA issues

Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
 2019-08-22 07:48:28 -05:00
Martin Kojtal 1182d1e9bb
Merge pull request #11284 from NXPmicro/K22_Add_USB_Support 
K22: Add USBDEVICE support
 2019-08-22 14:34:44 +02:00
jeromecoutant 680e0fc5fb DISCO_L4R9I: increase system clock from 80MHz to 120MHz 2019-08-22 13:32:20 +02:00
jeromecoutant bdd0689228 NUCLEO_L4R5ZI: increase system clock from 80MHz to 120MHz 2019-08-22 13:21:28 +02:00
Martin Kojtal 32e97e3371
Merge pull request #11267 from NXPmicro/LPC_Optimize_usticker 
NXP MCUXpresso: optimize us_ticker for LPC platforms
 2019-08-22 11:18:09 +02:00
Martin Kojtal 9d6bfcfc78
Merge pull request #11261 from NXPmicro/Enable_Tickless_LPC 
MCUXpresso: Add TICKLESS support for LPC platforms
 2019-08-22 11:06:00 +02:00
Alexandre Bourdiol 7647b39adc TARGET_STM: I2C sequential communication revert PR #3324 to original cube HAL 2019-08-22 10:44:20 +02:00
Martin Kojtal edcde1ce8c
Merge pull request #10796 from NXPmicro/tickless 
NXP: Enable MBED_TICKLESS on various NXP platforms
 2019-08-22 10:30:14 +02:00
Martin Kojtal d0c917cb32
Merge pull request #11274 from VVESTM/vve_eth_h7 
Add ethernet support on NUCLEO_H743ZI board
 2019-08-22 09:42:45 +02:00
Mahesh Mahadevan 20aa1ecfd9 K22F: Add FlashIAP for storage 
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
 2019-08-21 12:10:00 -05:00
int_szyk 5c9daa3941 Tweak stm_spi_api Coverity issue. 
Coverity warining: "memset fill truncated (NO_EFFECT)".
Changed SPI_FILL_WORD to SPI_FILL_CHAR.
 2019-08-21 16:47:35 +02:00
Vincent Veron 8ab6aecbe9 Move stm32xx_emac_config.h to family specific folder 
This allows to specify which hal version to use for each family.
It can also be used to modify the thread stack size.

Signed-off-by: Vincent Veron <vincent.veron@st.com>
 2019-08-21 15:02:45 +02:00
Vincent Veron 76fb4d22cc STM32H7 : update linker script files to use right location for lwip_ram_heap 
Signed-off-by: Vincent Veron <vincent.veron@st.com>
 2019-08-21 11:41:30 +02:00
Vincent Veron 9f2e9aa576 Add EMAC support for NUCLEO_H743ZI 
This port is based on :
    * CurryGuy ethernet branch :
        https://github.com/CurryGuy/mbed-os/tree/feature-stm32h7-emac
    * STM32 Cube example :
        Applications/LwIP/LwIP_HTTP_Server_Netconn_RTOS example

Signed-off-by: Vincent Veron <vincent.veron@st.com>
 2019-08-21 11:40:48 +02:00
Mahesh Mahadevan 7e6da8bffe K22: Add USBDEVICE support 
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
 2019-08-20 15:15:46 -05:00
Mahesh Mahadevan c8ad24c8f5 NXP MCUXpresso: optimize us_ticker for LPC platforms 
Provide new optimizations for us_ticker and wait_us.

Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
 2019-08-20 10:39:28 -05:00
aqib-ublox 80e30f4258 ADc internal temperature suuport and EMAC header fix 2019-08-20 18:44:22 +05:00
Martin Kojtal ce74bb53c4
Merge pull request #11178 from Tharazi97/watchdog_max_timeout 
ST: Watchdog: Fix timeout registers value calculation
 2019-08-20 13:47:31 +02:00
Martin Kojtal c37b5628ec
Merge pull request #11255 from cy-vaira/nvram-cy8cmod-062s2-43012 
Update NVRAM image for target CY8CMOD-062S2-43012
 2019-08-20 10:27:30 +02:00
Martin Kojtal 169ada9209
Merge pull request #11237 from Tharazi97/TT_M3HQ-build-problem 
Fix TT_M3HQ build problem
 2019-08-20 10:23:28 +02:00
Martin Kojtal 191f029f73
Merge pull request #11226 from chrissnow/LPC1768_WDT 
LPC1768 Watchdog & Reset Reason
 2019-08-20 10:22:42 +02:00
Martin Kojtal e2fef54898
Merge pull request #11188 from NXPmicro/MXRT_TRNG 
MIMXRT1050_EVK: Add TRNG support
 2019-08-20 09:50:43 +02:00
Martin Kojtal e3bfcbc2ff
Merge pull request #11142 from hugueskamba/hk-usb-targets-relocation 
Relocate USB target specific code to root `targets` directory
 2019-08-20 09:39:30 +02:00
Martin Kojtal e56f3199eb
Merge pull request #11127 from NXPmicro/Fix_LPC55S69_AnalogIn 
Fix ANALOGIN support for LPC55S69
 2019-08-20 09:33:40 +02:00
Martin Kojtal b16aaca568
Merge pull request #11118 from ganesh-ramachandran/m46b_newfeatures 
Add new features to Toshiba's TMPM46B
 2019-08-20 09:27:28 +02:00
Chun-Chieh Li 96dac4faa7 [M487] Exclude A2/A3 from testing for NuMaker-IoT-M487 V1.3 
Since NuMaker-IoT-M487 V1.3, A2/A3 are dedicated to on-board ESP8266 WiFi
module RTS/CTS pins and so must exclude from FPGA CI testing.
 2019-08-20 13:12:44 +08:00