Cruz Monrreal
1941906f72
Merge pull request #7376 from bcostm/dev_leds_disco_L496ag
...
DISCO_L496AG: change LED1 and LED2 pins
2018-07-05 10:37:57 -05:00
Mahesh Mahadevan
34dab4a4d9
LPC546XX: Fix UART mux setting in the LPCXpresso board
...
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2018-07-02 15:16:57 -05:00
Martin Kojtal
2353e7b1c6
Merge pull request #7029 from OpenNuvoton/nuvoton_5.9_ticker
...
Nuvoton: Adhere to reworked ticker spec to release with Mbed OS 5.9
2018-07-02 17:28:11 +02:00
Martin Kojtal
44acaf587b
Merge pull request #7369 from marcuschangarm/fix-nrf52-serial
...
Fix race condition in serial_api.c for NRF52 series
2018-07-02 17:24:16 +02:00
bcostm
b6beb74d9d
DISCO_L496AG: update LEDs comments in PeripheralPins.c
2018-07-02 10:27:23 +02:00
bcostm
a9ba4f9bf5
DISCO_L496AG: change LED1 and LED2 pins
2018-07-02 10:20:49 +02:00
Cruz Monrreal
2da597e56a
Merge pull request #7326 from bcostm/dev_lpuart1_clock_source
...
STM32: add lpuart_clock_source config
2018-06-29 20:09:09 -05:00
bcostm
0c417ab8b7
astyle
2018-06-29 10:12:40 +02:00
Martin Kojtal
58fa28b9b2
Merge pull request #7313 from mprse/NRF52840_ticker_width_fix
...
NRF_52840: Fix us ticker counter size
2018-06-29 10:10:40 +02:00
bcostm
9be8541a30
STM32: add lpuart_clock_source config
...
Keep same clock configuration as done before this PR (LSE and PCLK1).
Use a JSON file to change it.
2018-06-29 10:10:29 +02:00
Marcus Chang
2d71866028
Fix typo in NRF52 series README.md
...
UART configuration parameters mispelled.
2018-06-28 16:38:29 -07:00
Marcus Chang
fc087ab32c
Fix race condition in serial_api.c for NRF52 series
...
* Elevate RTC2 interrupt priority to same level as UARTE to prevent
race condition on shared variables.
* Remove unused TXDRDY event code.
* Fix typo in macro.
2018-06-28 16:36:16 -07:00
jeromecoutant
3721ac44d2
STM32 serial RX/TX active patch
...
In serial_tx_active and serial_rx_active functions,
we check the internal state value with
HAL_UART_STATE_BUSY_TX = 0x21U,
HAL_UART_STATE_BUSY_RX = 0x22U,
It seems that value can also be :
HAL_UART_STATE_BUSY_TX_RX = 0x23U,
2018-06-28 18:05:52 +02:00
Cruz Monrreal
bf21bac52d
Merge pull request #7351 from jeromecoutant/PR_ASTYLE
...
STM32 files with MBED astyle rules
2018-06-28 10:06:03 -05:00
ccli8
4f04ae489e
[Nuvoton] Synchronize lp_ticker code to us_ticker
...
This is to make us_ticker/lp_ticker code consistent.
2018-06-28 16:34:45 +08:00
ccli8
1fa3374310
[Nuvoton] Remove special handling for dummy interrupt in lp_ticker
...
It is because dummy interrupt is very rare or pending time caused by it
is very short.
2018-06-28 16:27:37 +08:00
Cruz Monrreal
5bf483ee17
Merge pull request #7330 from KariHaapalehto/clean_up
...
Clean-up targets.json
2018-06-27 18:44:41 -05:00
Cruz Monrreal
faa31de72e
Merge pull request #7323 from marcuschangarm/fix-serial
...
Improve serial performance for NRF52 series
2018-06-27 18:43:43 -05:00
Przemyslaw Stekiel
9966110dd9
NRF_52840: Fix us ticker counter size
...
It has been noticed that there is a problem with us ticker on NRF_52840 board after 32 bit counter has been used for us ticker on NRF52 family boards.
Currently NRF52 symbol is defined only for MCU_NRF52832 (not for MCU_NRF52840) and based on this symbol 16 or 32 bit counter is selected (16 bit for NRF51 family and 32 for NRF52 family).
Since MCU_NRF52840 defines NRF52840_XXAA and provides 32 bit counters, 32 bit counter should be selected also when NRF52840_XXAA symbol is defined.
2018-06-27 15:33:07 +02:00
jeromecoutant
78410e7032
TARGET_STM32L4 astyle
2018-06-27 14:46:00 +02:00
jeromecoutant
ecffec8336
TARGET_STM32L1 astyle
2018-06-27 14:44:37 +02:00
jeromecoutant
baf97d78aa
TARGET_STM32L0 astyle
2018-06-27 14:43:59 +02:00
jeromecoutant
e9d7128485
TARGET_STM32F7 astyle
2018-06-27 14:42:56 +02:00
jeromecoutant
f50720e2a4
TARGET_STM32F4 astyle
2018-06-27 14:42:28 +02:00
jeromecoutant
6df23ee841
TARGET_STM32F3 astyle
2018-06-27 14:32:10 +02:00
jeromecoutant
f9bd4768a5
TARGET_STM32F2 astyle
2018-06-27 14:31:31 +02:00
jeromecoutant
c8313901fb
TARGET_STM32F1 astyle
2018-06-27 14:31:04 +02:00
jeromecoutant
6066e68ec6
TARGET_STM32F0 astyle
2018-06-27 14:23:31 +02:00
jeromecoutant
433ba46132
TARGET_STM astyle
2018-06-27 14:21:07 +02:00
Kari Haapalehto
34abadc0f6
Cleaning MTB_USI_WM_BN_BM_22, MTB_ADV_WISE_1530 and MTB_MXCHIP_EMW3166 targets
...
These wiced targets are not supported at mbed-os 2 release, so removing
"2" from release_versions.
LWIP feature flag removed, since it isn't needed anymore.
EMAC removed from device_has_add, since it isn't needed with these targets.
"network-default-interface-type": "WIFI" has been added.
2018-06-26 14:31:26 +03:00
Boting Ren
6f9c76c949
fix LED_RED mapping on NUCLEO_F429ZI
2018-06-26 16:22:28 +09:00
ccli8
310a1fe318
[Nuvoton] Synchronize lp_ticker code to us_ticker
...
This is to make us_ticker/lp_ticker code consistent.
2018-06-26 13:47:30 +08:00
ccli8
8e11ddf3b6
[Nuvoton] Fix trap in lp_ticker ISR with non-blocking "clear interrupt flag"
2018-06-26 13:47:29 +08:00
ccli8
fe627cb722
[Nuvoton] Synchronize lp_ticker code to us_ticker
...
This is to make us_ticker/lp_ticker code consistent.
2018-06-26 13:47:27 +08:00
ccli8
86e194d075
[Nuvoton] Reduce blocking code in lp_ticker
...
1. Introduce S/W interrupt enable/disable to reduce calls to TIMER_EnableInt/TIMER_DisableInt.
2. Allow dummy interrupt because clear interrupt flag is not synchronized.
3. Enable LPTICKER_DELAY_TICKS to make lp_ticker_set_interrupt non-blocking.
2018-06-26 13:47:26 +08:00
ccli8
7caec46512
[NANO130] Adjust static/dynamic memory allocation for IAR toolchain to pass Greentea test
2018-06-26 13:47:23 +08:00
ccli8
12792fde27
[NANO130] Fix CLK_Idle incorrectly enters into deep sleep mode
...
This can happen with CLK_PowerDown() called first and then CLK_Idle() called.
2018-06-26 13:47:22 +08:00
ccli8
3f861425da
[Nuvoton] Meet new lp_ticker HAL spec (Mbed OS 5.9)
...
1. Add LPTICKER in device_has option of targets.json file.
2. Disable ticker interrupt in lp_ticker_init
3. Add lp_ticker_free
4. Enable interrupt in lp_ticker_set_interrupt
2018-06-26 13:47:17 +08:00
ccli8
ebd93ba753
[Nuvoton] Meet new us_ticker HAL spec (Mbed OS 5.9)
...
1. Add USTICKER in device_has option of targets.json file.
2. Disable ticker interrupt in us_ticker_init
3. Add us_ticker_free
4. Enable interrupt in us_ticker_set_interrupt
2018-06-26 13:45:33 +08:00
Marcus Chang
6346ba87c0
Improve serial performance for NRF52 series
...
Time sensitive user callbacks are called through lowest priority
SWI handlers instead of the highest priority UART handler.
2018-06-25 17:15:40 -07:00
Marcus Chang
ddc709acec
Make serial_putc non-blocking for the NRF52 series
...
Previous implementation would block until character had been
completely sent, which is not what the API specifies.
2018-06-25 13:19:15 -07:00
Marcus Chang
a42f1d7a81
Remove whitespace from NRF52 serial_api.c
2018-06-25 13:16:11 -07:00
Cruz Monrreal
f3424da060
Merge pull request #7287 from SeppoTakalo/remove_feature_lwip
...
Remove FEATURE_LWIP
2018-06-25 11:23:15 -05:00
TomoYamanaka
36ad12c403
Modify RAM size definition of ARMCC for GR-LYCHEE
...
I modified RAM size of ARMCC compiler for GR-LYCHEE.
In case of GR-LYCHEE, RAM size is 3M Byte(including Non-Cache area), but there was a typo at MACRO definition.
2018-06-25 15:44:01 +09:00
Cruz Monrreal
8e170ccbd1
Merge pull request #6925 from TomoYamanaka/feature-flashiap_bootloader
...
Support Flash iAP and Bootloader for GR-PEACH and GR-LYCHEE
2018-06-22 14:23:57 -05:00
Cruz Monrreal
d160cc6cd0
Merge pull request #7284 from KariHaapalehto/wise1530_usi22_support
...
Add binary drivers for MTB_USI_WM_BN_BM_22 and MTB_ADV_WISE_1530
2018-06-22 10:16:16 -05:00
Cruz Monrreal
24daf18044
Merge pull request #7105 from codeauroraforum/mxrt_add_ivt
...
MIMXRT1050: Update to EVK Rev B
2018-06-22 10:15:33 -05:00
Cruz Monrreal
446de6947a
Merge pull request #7145 from drahnr/master
...
NRF52: add a separate .nvictable section and allow .noinit to be used…
2018-06-21 23:32:22 -05:00
TomoYamanaka
94c13c5362
Support Bootloader for GR-PEACH and GR-LYCHEE
...
The mainly changes is below:
- Update scatter file, linker file for bootloader support
- Update the file for RZ/A1 serial flash boot loader
- Add "device name" and "bootloader_supported" in targets.json
2018-06-22 10:40:45 +09:00
TomoYamanaka
18a8eac72b
Support Flash iAP for GR-PEACH and GR-LYCHEE
...
The mainly changes is below:
- Add flash_api.c
- Add the definition of SPI multi I/O Bus controller that is used for flash access
- Add "FLASH" as device feature
- Add the macro regarding information of the incorporated Flash
- Add the processing to expand code to RAM
2018-06-22 10:40:45 +09:00