ARMmbed
/
mbed-os
mirror of https://github.com/ARMmbed/mbed-os.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
13,882 Commits
52 Branches
336 Tags
624 MiB
Commit Graph

1125 Commits (mbed-os-5.7)

Author SHA1 Message Date
Mathieu Garivet 858c0d223a Fix RTR position bit in TX mailbox register 2017-12-20 16:05:42 +00:00
Martin Kojtal c7e5eb2f97
Merge pull request #5397 from sakuraio/stm_sco-evb-01 
add target SAKURAIO_EVB_01.
 2017-11-30 18:16:09 +00:00
Martin Kojtal 45e9e4cab3
Merge pull request #5565 from LMESTM/fix_slave_3wires 
STM32: SPI 3 wires mode not supported in SPI slave
 2017-11-30 18:11:16 +00:00
andreas.larsson f2de0956b4 Updated ODIN drivers to v2.3 RC1 2017-11-28 12:22:45 +01:00
Laurent MEUNIER 839bd642d0 STM32: SPI 3 wires mode not supported in SPI slave 
This patch handles the case of SPI slave mode without MISO (NC).
In case MISO is not connected, we consider that SPI will be configured in
3 wires mode (CLK / MOSI / CS, but no MISO). In this case, the MOSI line
is bi-directional : SPI_DIRECTION_1LINE.

But as this is not supported yet in slave mode, we force it to
SPI_DIRECTION_2LINES. In this case slave SPI will receive data on MOSI
but nothing will be sent back to master as MISO is not connected.
 2017-11-23 10:10:05 +01:00
Jimmy Brisson 369187cadf
Merge pull request #5535 from MikeDK/nucleo_l432kc_async_serial_fix 
NUCLEO_L432KC: Fixed async serial
 2017-11-22 10:19:53 -06:00
Jimmy Brisson ced2f74f16
Merge pull request #5513 from bcostm/fix_adc_inited 
STM32: Initialize ADC peripheral for each AnalogIn object creation
 2017-11-22 10:16:14 -06:00
Jimmy Brisson 800be4e90d
Merge pull request #5512 from jeromecoutant/PR_L072 
DISCO_L072CZ_LRWAN1 can use LSE from LORA module
 2017-11-20 10:53:20 -06:00
Michael Kaplan 8a1c29c2e5 TARGET_STM32L4: added missing #ifdef in serial_device.c 2017-11-20 15:49:18 +01:00
bcostm c54e9079b8 STM32 ADC: replace flags type from int to bool 2017-11-17 13:50:59 +01:00
bcostm 1d3eb508bf STM32: fix linker error with adc_read() 2017-11-17 13:50:59 +01:00
bcostm 2bbedabf7d STM32: add analogin_api.c file in STM folder 2017-11-17 13:50:59 +01:00
bcostm 34fdcc926b STM32: move analogin_read functions in a common file 2017-11-17 13:50:59 +01:00
bcostm 4dbe95dded STM32: rename analogin_api.c in analogin_device.c 2017-11-17 13:50:59 +01:00
bcostm 072ec2e765 STM32L4 ADC: remove adc_inited flag 2017-11-17 13:50:59 +01:00
bcostm 52d942e2d2 STM32L1 ADC: remove adc_inited flag 2017-11-17 13:50:59 +01:00
bcostm 4b82479175 STM32L0 ADC: remove adc_inited flag 2017-11-17 13:50:59 +01:00
bcostm 75f80abddc STM32F7 ADC: remove adc_inited flag 2017-11-17 13:50:59 +01:00
bcostm d5ff05a03b STM32F4 ADC: remove adc_inited flag 2017-11-17 13:50:59 +01:00
bcostm 7005bc21d7 STM32F3 ADC: remove adc_inited flag 2017-11-17 13:50:59 +01:00
bcostm f12391ad25 STM32F2 ADC: remove adc_inited flag 2017-11-17 13:50:59 +01:00
bcostm 36110e10cf STM32F1 ADC: remove adc_inited flag 2017-11-17 13:50:58 +01:00
bcostm 2e2744ccbe STM32F0 ADC: remove adc_inited flag 2017-11-17 13:50:58 +01:00
Martin Kojtal 01bc4340e8
Merge pull request #5482 from bcostm/fix_disco_l072cz_extclock 
DISCO_L072CZ_LRWAN1: HSE clock configuration improvement
 2017-11-16 16:15:12 +00:00
Martin Kojtal 114e019675
Merge pull request #5486 from bcostm/fix_CAN3 
STM32: Add support of CAN3
 2017-11-16 16:12:27 +00:00
Martin Kojtal dc6dd5961e
Merge pull request #5505 from LMESTM/fix_smartcard_HAL 
STM32: HAL smartcard, fix memory corruption in Receive
 2017-11-16 16:11:04 +00:00
jeromecoutant 5f86ae5757 STM32L072CZ error in ARM sct file name 2017-11-16 15:12:51 +01:00
Martin Kojtal 41eb565d9c
Merge pull request #5342 from ARMmbed/feature_cortex_a 
Update CMSIS/RTX with Cortex-A support
 2017-11-15 11:24:36 +00:00
Laurent MEUNIER be42c6de55 STM32: HAL smartcard, fix memory corruption in Receive 
Re-casting with tmp the uint8_t* pData pointer to uint16_t* brings a
memory corruption and typically can corrupt the size parameter. This
is fixed with this commit.

STM32 Internal ticket reference : 39116
 2017-11-15 10:50:21 +01:00
bcostm 2d8d8ae9e1 STM32: fix error with CAN_3 not defined 2017-11-15 10:36:03 +01:00
bcostm 2e2b408580 STM32: fix compilation error with STM32F1 2017-11-15 09:07:52 +01:00
bcostm f0aed41991 DISCO_L072CZ: remove dead code 2017-11-15 08:59:50 +01:00
bcostm be2a6ae273 STM32: Use CAN3_BASE + typos 2017-11-14 09:48:02 +01:00
bcostm 0ef4e2881c STM32: Add support of CAN3 on STM32F413/F767 2017-11-14 09:48:02 +01:00
bcostm c0f6b25eba DISCO_L072CZ: align SetSysClock_PLL_HSE() with SetSysClock_PLL_HSI() 2017-11-13 11:34:56 +01:00
Bartek Szatkowski c5a5438256 Update params in calls to LD/STREXW to be uint32_t 2017-11-10 09:53:42 +00:00
Martin Kojtal 47bae16a5c
Merge pull request #5305 from andcor02/master 
New Target: Mbed Connect Cloud board
 2017-11-10 08:43:29 +00:00
Martin Kojtal 18393f3faf
Merge pull request #5424 from jeromecoutant/PR_L496 
NUCLEO_L496ZG_P support
 2017-11-09 16:32:56 +00:00
Martin Kojtal 66054f4b62
Merge pull request #5455 from LMESTM/flash_2MB_GetSector_fix 
STM32 Flash 2MB GetSector fix
 2017-11-09 16:23:02 +00:00
jeromecoutant 17c86d1cd6 STM32F412 IAR linker file issue 2017-11-09 09:45:07 +01:00
Laurent MEUNIER 48a49b4a00 STM32: remove trailing white spaces 2017-11-08 10:28:46 +01:00
Laurent MEUNIER d9bda2800d STM32F4: Flash: fix 2MB GetSector computation 
The computation of the sector number in GetSector for 2MB flash sizes
consists in adding an extra constant for 2MB dual bank (12 as in
ADDR_FLASH_SECTOR_12), then going through the same address check as if it
was an address of the first sector.

That means that we need to modify tmp and address as if it was a first bank
address, which we're doing here by sub_stracting 0x100000 delta.
 2017-11-08 10:24:36 +01:00
jeromecoutant dde615b8a8 NUCLEO_L496ZG minor update 2017-11-03 10:54:49 +01:00
Jimmy Brisson 9163ddfe61
Merge pull request #5399 from jeromecoutant/PR_MSP 
STM32F4/STM32L4: remove MSP template file
 2017-11-02 10:42:04 -05:00
Jimmy Brisson c40b642455
Merge pull request #4650 from catiedev/master 
NUCLEO_L496ZG: Add new Platform
 2017-11-02 10:36:23 -05:00
Andrea Corrado 53c476acf2 introduced mbed Connect Cloud board based on ODIN-W2 Module rety commit, added ublox changes 
Corrected error

Corrected error in targets json

Reworked JSON

Added lwip-eth to Connect ODIN removes ARM CC error

Fixed formating issues

Correct formating error in  .json

Indentation errors
 2017-10-31 11:24:28 +00:00
jeromecoutant c51f0f3d5f STM32F4/STM32L4: remove MSP template file 
HAL_MspInit/HAL_MspDeInit/HAL_PPP_MspInit/HAL_PPP_MspDeInit weak functions can now be overwritten as it is expected
 2017-10-30 10:38:43 +01:00
Anna Bridge 38ba693c57 Merge pull request #5327 from bcostm/remove_warnings 
STM32: Remove compilation warnings
 2017-10-26 11:05:20 +01:00
Jimmy Brisson 3354327a9f Merge pull request #5188 from bcostm/fix_dac_f207zg 
NUCLEO_F207ZG: Analogout improvement
 2017-10-23 10:31:17 -05:00
Jimmy Brisson 656aa8279b Merge pull request #5179 from LMESTM/trng_deprecated_call 
STM32: TRNG: remove call to deprecated HAL_RNG_GetRandomNumber
 2017-10-23 10:29:04 -05:00
misodengaku 1c28898ed1 add target TARGET_SAKURAIO_EVB_01. 2017-10-23 12:55:58 +09:00
Martin Kojtal 2af7213c51 Merge pull request #5104 from architech-boards/master 
add support for SILICA_SENSOR_NODE platform
 2017-10-19 16:44:17 +01:00
bcostm 35bf526ca4 STM32: Remove IAR compilation warning 2017-10-18 10:07:06 +02:00
bcostm ad55bc26dc STM32: Remove GCC_ARM compilation warnings 2017-10-17 14:04:59 +02:00
Laurent MEUNIER 849749f86f STM32: RNG: Ensure that no more than 1 instance is used 
There is only 1 RNG HW IP and we do not support more than one driver
user at a time, so let's ensure this is the case and raise an error if
needed.
 2017-10-13 16:59:33 +02:00
Laurent MEUNIER 14343c49c4 STM32: TRNG: remove call to deprecated HAL_RNG_GetRandomNumber 
HAL_RNG_GetRandomNumber is a deprecated API and replaced here with
a call to HAL_RNG_GenerateRandomNumber.

Doing so, we also rework the driver to use the 4 bytes returned by a call
to HAL_RNG_GenerateRandomNumber instead of 1 byte out of 4.

HAL_RNG_GenerateRandomNumber was not returning any error code, so now
we can also check the return code.
 2017-10-13 16:59:29 +02:00
Jimmy Brisson 410ef0cc6c Merge pull request #5289 from LMESTM/test_api_ticker 
STM32: RTC: Call irq_handler whenever interrupt fires
 2017-10-13 09:28:18 -05:00
Jimmy Brisson de3784f6da Merge pull request #5288 from bcostm/NUCLEO32_add_ALT_pins 
STM32: Add alternate pins on NUCLEO 32pins boards
 2017-10-13 09:27:53 -05:00
Jimmy Brisson f596c714bd Merge pull request #5287 from andreaslarssonublox/ublox_odin_driver_os_5_v2.2_rc1 
Updated u-blox ODIN-W2 binaries to 2.2 rc1
 2017-10-13 09:27:29 -05:00
Jimmy Brisson 8bf2775e00 Merge pull request #5269 from bcostm/fix_rtc_struct_init 
STM32: Initialize RTC structures at init phase.
 2017-10-13 09:27:06 -05:00
Jimmy Brisson 6a74cdb39c Merge pull request #5263 from bcostm/fix_init_struct 
STM32: Fix analogout structure/variable wrong initialization
 2017-10-13 09:25:59 -05:00
Pavel Sorejs 97cb8519c8 Add bootloaderd support to NUCLEO_F446RE target 2017-10-12 19:44:02 +02:00
Laurent MEUNIER e15ebd3c53 STM32: RTC: Call irq_handler whenever interrupt fires 
lp_ticker driver is the known registered user of RTC handler API.

In case, a lp_ticker is set in the past, the lp_ticker_fire_interrupt
will be called which itself sets the RTC interrupt as pending by calling
NVIC_SetPendingIRQ(RTC_WKUP_IRQn). This all happens without actual
programing of the RTC wake-up.

As a result the RTC HW and corresponding HAL layer doesn't expect an
interrupt to happen and will not call HAL_RTCEx_WakeUpTimerEventCallback.

To sove this situation, we will not use HAL_RTCEx_WakeUpTimerEventCallback
weak definition but rather call handler whenever an RTC interrupt fires.
 2017-10-10 17:05:45 +02:00
bcostm 992722df2a Initialize State variable 2017-10-10 16:47:05 +02:00
Roberto Spelta 35736f57a3 removed memory allocation 2017-10-10 16:46:12 +02:00
bcostm c571d8d6f8 STM32 RTC: initializes structures 2017-10-10 16:23:35 +02:00
Roberto Spelta 7af6e88999 fixed pin LEDs 2017-10-10 16:04:52 +02:00
bcostm 02598d57fa Typo correction 2017-10-10 15:04:56 +02:00
bcostm 868143e3dd Coding style and add State field init 2017-10-10 15:02:11 +02:00
bcostm c5cc9ec8cf NUCLEO_F207ZG: Fix issue with tests-api-analogout and GCC_ARM 
Without this fix the tests-api-analogout test is fail with GCC_ARM.
 2017-10-10 15:02:11 +02:00
bcostm e46beb659f NUCLEO_L011K4: add ALT pins + cleanup 2017-10-10 14:44:01 +02:00
bcostm 0155a416e6 NUCLEO_F042K6: add ALT pins + cleanup 2017-10-10 14:13:10 +02:00
Roberto Spelta 182d689b8c setted pin USBTX and USBRX 2017-10-10 13:58:41 +02:00
Roberto Spelta c5e6689e82 added TARGET_STM32L476JG define in mbed_rtx.h 2017-10-10 13:58:41 +02:00
Roberto Spelta f63dfce4bb modification to .ld to improve memory 2017-10-10 13:58:41 +02:00
Roberto Spelta e466685666 copy of L476RG ld file 2017-10-10 13:58:41 +02:00
Roberto Spelta 4d75cbec01 peripherals pins adaptation 2017-10-10 13:58:41 +02:00
Roberto Spelta a95acdabb3 copy of L476RG target 2017-10-10 13:58:41 +02:00
bcostm 6ac1b0e046 NUCLEO_L432KC: add ALT pins + cleanup 2017-10-10 10:51:04 +02:00
bcostm 34760c5567 NUCLEO_L031K6: add ALT pins + cleanup 2017-10-10 10:51:03 +02:00
bcostm f6e30e7422 NUCLEO_F303K8: add ALT pins + cleanup 2017-10-10 10:50:48 +02:00
Jimmy Brisson 80ff7071b4 Merge pull request #5210 from bcostm/L4_add_adc_calib 
STM32: add ADC calibration for L4, F1, F3 devices
 2017-10-09 11:15:31 -05:00
Jimmy Brisson df484e7885 Merge pull request #5192 from andreaslarssonublox/ublox_move_stdio_uart_defines 
Moved STDIO_UART defines for UBLOX_EVK_ODIN_W2
 2017-10-09 11:14:06 -05:00
Jimmy Brisson d60f1452d5 Merge pull request #5113 from LMESTM/i2c_OpenDrainNoPull 
STM: I2C: Configure pins in OpenDrainNoPull by default (no pullup)
 2017-10-09 11:12:04 -05:00
Pierre-Marie Ancele c476a600a2 remove sys.cpp file of the ARM_STD toolchain as done in the MR #4949 2017-10-06 11:37:03 +02:00
Pierre-Marie Ancele ed32f57070 fix can_s struct definition 2017-10-06 11:37:03 +02:00
adustm 4e83d7fb15 Fix for IAR tests 2017-10-06 11:35:16 +02:00
adustm 554125ef07 Align IAR files with mbed-os implementation (tests are still failing) 2017-10-06 11:35:16 +02:00
adustm 3ca0b64318 Replace tab by spaces 2017-10-06 11:35:16 +02:00
adustm fa54e1ecba Make ARM test pass on mbed-os5 tests 2017-10-06 11:35:16 +02:00
adustm 02df64b7d6 replace tab by spaces 2017-10-06 11:35:16 +02:00
Nabil Elqatib 507d05915d Remove analogin_s definition from objects.h 
The structure being already defined in
targets/TARGET_STM/TARGET_STM32L4/common_objects.h#L119, there is a
redefinition conflict.
 2017-10-06 11:35:16 +02:00
Pierre-Marie Ancele fb27107416 NUCLEO_L496ZG change LPUART1 clock source to fix crash on serial init 2017-10-06 11:35:16 +02:00
Pierre-Marie Ancele abb5e2d0d3 NUCLEO_L496ZG JSON Clock Configuration 2017-10-06 11:35:16 +02:00
Pierre-Marie Ancele 65fec215ab NUCLEO_L496ZG Fix IAR startup script 2017-10-06 11:35:16 +02:00
Pierre-Marie Ancele 4219ffc626 NUCLEO_L496ZG Fix ARM startup script 2017-10-06 11:35:16 +02:00
Pierre-Marie Ancele 3b2bc2d10c STM32L496xG fix objects.h to fit common_objects definition 2017-10-06 11:35:16 +02:00
Pierre-Marie Ancele 313a933c09 NUCLEO_L496ZG Update comments 2017-10-06 11:35:16 +02:00
Pierre-Marie Ancele cca32d8196 NUCLEO_L496ZG Use new alternative pins definition 2017-10-06 11:35:16 +02:00
Pierre-Marie Ancele aebc227c15 NUCLEO_L496ZG update date in file copyrights headers 2017-10-06 11:35:16 +02:00
Pierre-Marie Ancele 7c6c710ee1 NUCLEO_L496ZG Use correct linker script for IAR 2017-10-06 11:35:16 +02:00
Pierre-Marie Ancele eea667567e STM32L496ZG add IAR toolchain 2017-10-06 11:35:16 +02:00
Pierre-Marie Ancele dc2f29c86e STM32L496ZG add ARM_STD toolchain 2017-10-06 11:35:16 +02:00
Pierre-Marie Ancele 53d66bb013 STM32L496ZG add ARM_MICRO toolchain 2017-10-06 11:35:16 +02:00
Nabil Elqatib fd7008c779 Add BSP files for NUCLEO_L496ZG 2017-10-06 11:35:16 +02:00
Pierre-Marie Ancele 6d3e17cb3c add compatibility with STM32L496xG MCUs 2017-10-06 11:35:16 +02:00
bcostm 88b82e312d fix init struct analogout 2017-10-05 16:35:05 +02:00
andreas.larsson bc3fd12a0d Updated u-blox ODIN-W2 binaries to 2.2 rc1 2017-10-04 16:41:59 +02:00
andreas.larsson 120c9ad56c Moved STDIO_UART defines to targets.json for UBLOX_EVK_ODIN_W2 instead of hardcoded. 2017-10-02 17:45:41 +02:00
Jimmy Brisson c60194fdfd Merge pull request #5208 from jeromecoutant/PR_F7_RTC 
STM32F7 : RTC Wake Up Timer issue
 2017-10-02 10:41:31 -05:00
Jimmy Brisson cc0b3d05aa Merge pull request #5130 from bcostm/freeze_timer_in_debug 
STM32: Freeze master timer on stop/breakpoint
 2017-10-02 10:38:57 -05:00
Jimmy Brisson 60ca4e9615 Merge pull request #5029 from kegilbert/odin-pinNames-whitespace-adjust 
Adjust whitespace in Odin PinNames file to fit verbose LED pin mappings
 2017-09-29 10:07:46 -05:00
bcostm fca97146cd Add ADC calibration for STM32F1 and F3 devices 2017-09-28 12:49:11 +02:00
Jimmy Brisson c06368a21e Merge pull request #5171 from jeromecoutant/PR_L432_RAM 
STM32L432KC: increase RAM size from 48k to 64k
 2017-09-27 15:35:44 -05:00
Jimmy Brisson 6cb0258344 Merge pull request #5026 from LMESTM/flash_init_issue_4967 
STM32: Lock / Unlock flash for each operation
 2017-09-27 15:17:26 -05:00
Jimmy Brisson c24fed135b Merge pull request #5032 from 0xc0170/fix_mts_debug 
mts targets: fix debug() usage
 2017-09-27 09:07:53 -05:00
bcostm 4824e18a95 STM32L4: add ADC calibration 2017-09-27 14:38:34 +02:00
jeromecoutant 1e36eb6fc9 STM32F7 : RTC Wake Up Timer issue 2017-09-26 17:04:29 +02:00
Martin Kojtal a74e95fb26 Merge pull request #4973 from gorazdko/new-target-L-TEK-FF1705 
Add new target: L-TEK FF1705
 2017-09-22 11:32:50 +01:00
Jimmy Brisson a2cdb10bf7 Merge pull request #4932 from LMESTM/can_reset 
Fix STM32 CAN reset to not lose context
 2017-09-20 16:24:40 -05:00
jeromecoutant 8b0ee27819 STM32L432KC: increase RAM size from 48k to 64k 
WARNING: you have to update ST-Link FW to V2J29M18
http://www.st.com/en/development-tools/stsw-link007.html
 2017-09-19 15:11:23 +02:00
bcostm 5bf18682e2 Add FREEZE_TIMER_ON_DEBUG condition 
In order to give the choice to enable or not the timer freeze on stop/breakpoint.
This has to be defined in the mbed_app.json file for example.
 2017-09-18 13:39:05 +02:00
bcostm 9f86a32baf Add freeze timer on debug for all STM32 devices 
This is a continuation of the work done on the STM32F401xE devices only.
 2017-09-18 13:31:46 +02:00
Laurent MEUNIER 076b096efe STM: I2C: Confifure pins in OpenDrainNoPull by default (no pullup) 
As reported by MBED user Fran6Jack:
I2C bus are usually 5V tolerant on all STM32 processor.
If an external device on the I2C bus requires 5V operation,
we usually acheive it by using 5V external pull-ups on the bus.
Since signaling uses open-drain output on I2C for both signal SCL and SDA
any 5V tolerant MCU will work on a 5V I2C bus. Having pull-up activated on a 5V externally pull bus, cause the pin to clamp on the STM32 die diode and could damage the IC (There is a note in STM32 datasheet specifying this issue).
It is understood by all the community that I2C bus should always be
externally pulled by physical resistor. I2C initialization should then
be ALWAYS OpenDrainNoPull by default.

Up to now, this I2C driver was setting pull up by default as it helps
basic testing, like 1 master and 1 slave, conencted with 2 wires without
any external pull ups. This will not work anymore after this commit and
applications tests or examples needs to be modified to explicitely
configure pull ups ...  But it is safer to follow reference manual
guidelines.
 2017-09-14 17:15:11 +02:00
Jimmy Brisson d3b33d75a4 Correct NRF SDK11 assembly 2017-09-11 13:20:33 -05:00
Jimmy Brisson 0b7a9033b5 Enable many STM devices with ARMC6 
Yet another incorrect arm vs gcc discriminant
 2017-09-11 13:20:32 -05:00
Jimmy Brisson 15a9a0382b Enable Compiling with ARMC6 across all targets 
remove duplicate sys.cpp
 2017-09-11 13:20:32 -05:00
Jimmy Brisson 3f2e986256 Merge pull request #5012 from LMESTM/issue5004_ticker_16b 
STM32_us_ticker_16b: keep code to cope with past event
 2017-09-09 12:09:25 -05:00
Russ Butler 72f07ec4d9 Make room on stm32f07 for tickless 
Decrease the interrupt stack from 2k down to 1k so there is enough
ram to build all the tests with tickless enabled. In general, targets
should not need an interrupt stack greater than 1k with mbed-os.
 2017-09-07 21:35:06 -05:00
Jimmy Brisson 9b85155aa7 Merge pull request #4881 from betzw/betzw_freeze_github_wb 
[STM32F401xE] Freeze master timer on stop/breakpoint
 2017-09-06 14:25:47 -05:00
Martin Kojtal 52f84810a7 mts targets: fix debug() usage 
Instead of using #if NDEBUG, we can directly invoke debug() function. Fixes #5013
 2017-09-06 15:56:01 +01:00
Kevin Gilbert 6fa766da50 Adjust whitespace in Odin PinNames file to fit verbose LED pin mappings 2017-09-05 13:43:06 -05:00
Jimmy Brisson 5f9d984a22 Merge pull request #5013 from janjongboom/mts_printf 
MTS targets: Don't use any printf() calls when NDEBUG is defined
 2017-09-05 11:19:42 -05:00
Jimmy Brisson 34d41c5068 Merge pull request #4995 from kegilbert/odin-led-remap 
Add LED color remapping definitions to Odin target
 2017-09-05 11:17:42 -05:00
Jimmy Brisson e009d9f7be Merge pull request #4975 from LMESTM/STM32_SPI3W 
Stm32 spi 3 wires mode support
 2017-09-05 11:16:53 -05:00
Jimmy Brisson 94fb4a3aad Merge pull request #4929 from bcostm/adc_sampletime_vrefint 
STM32F4: Increase ADC sample time for VREF
 2017-09-05 11:15:53 -05:00
Laurent MEUNIER f5aa7c7c82 STM32: Lock / Unlock flash for each operation 
Rather than Unlocking flash during flash object creation, and leaving
the flash possibly continuously unlocked a(s object might bever be freed),
we decide to Unlock then Lock again at each erase or program call.
 2017-09-05 17:49:07 +02:00
Laurent MEUNIER f2eb77a81a STM32_us_ticker_16b: reset counter when fire interrupt 
Fixing regression introduced in commit
"Ticker: add fire interrupt now function".

In above mentioned commit, the management of timestamp being in the past
has been moved to higher layer (hal/mbed_ticker_api.c), but the reset of
oc_int was missing when implementing the new us_ticker_fire_interrupt
function - which is fixed now.
 2017-09-05 13:03:21 +02:00
Laurent MEUNIER 5997811d46 STM32: F2: put can_s struct under DEVICE_CAN option 
In case of F2 devices without CAN support.
 2017-09-05 10:27:21 +02:00
Laurent MEUNIER 04ac65a4e6 STM32: CAN: restore registers after can_reset 
After reset the MCR register content needs to be restored so we're
introducing the can_registers_init function to be called at the first
init stage, but also after reset. We also store the can frequency to
go through the initialisation phase again.
 2017-09-05 10:27:21 +02:00
Laurent MEUNIER 8357f6fe77 STM32: CAN: store the mode in object context 
In order to apply the same mode in case of reset, we store the current
requested mode in the HAL structure.

To make storage in a single place, we also change can_monitor to call
can_mode function as they actually acting on same registers.
 2017-09-05 10:27:21 +02:00
Laurent MEUNIER 57222b604f STM32: CAN: do not overwite BTR register when setting frequency 
BTR register has other bits than the ones calculated and set through
the can_speed function, so let's take care to only write to the
right registers.
 2017-09-05 10:27:21 +02:00
Laurent MEUNIER 759642af8e STM32: Define CAN handle as part of can object 
Instead of a static object, this will make driver
instantiation more robust and allow to re-use init
configuration on a need basis.

The CANName struct member is actually the CAN registers base address,
which is now available in the CanHandle.Instance field, so we don't need
CANName anymore.
 2017-09-05 10:27:21 +02:00
Laurent MEUNIER 66162c6b1d STM32: move can_s definition to common_objects.h 
This will ease up further changes to the structure.
 2017-09-05 10:27:21 +02:00
Martin Kojtal 675a17cff2 Merge pull request #4980 from LMESTM/stm32_flash_update 
Stm32 flash update
 2017-09-04 16:49:18 +01:00
Jan Jongboom 72262ca0b3 MTS targets: Don't use any printf() calls when NDEBUG is defined, prevents linking out printf() and friends in release build 2017-09-04 12:05:41 +01:00
Laurent MEUNIER b01cc966b0 Introduce TIMEOUT_1_BYTE 
This makes the code more explicit about what is last parameter of
HAL_SPI_Transmit/HAL_SPI_Receive functions.
 2017-09-04 11:16:49 +02:00
Kevin Gilbert 41000e091c Add LED color remapping definitions to Odin target 2017-09-01 17:00:24 -05:00
gorazd 7773acd78c arduino connector namings added 2017-08-31 15:18:14 +02:00
Jimmy Brisson 82f5ce22f8 Merge pull request #4951 from JanneKiiskila/ublox_odin_buttons 
UBLOX_EVK_ODIN_W2- add BUTTON1/2 definitions
 2017-08-29 13:46:10 -05:00
Jimmy Brisson d68cd09c63 Merge pull request #4944 from LMESTM/F1_AFIO_CLK 
STM32: F1 GPIO: Enable AFIO clock
 2017-08-29 13:45:27 -05:00
Laurent MEUNIER dacf04e69b STM32: Flash: cover TARGET_F410RB case 
There was a comilation error for NUCLeO_F410RB as it does not have
a ADDR_FLASH_SECTOR_5.
 2017-08-29 11:42:51 +02:00
Wolfgang Betz f8114f2295 [STM32F401xE] Freeze master timer on stop/breakpoint 2017-08-28 14:29:47 +02:00
Laurent MEUNIER a9468c09e3 STM32: F7 Flash API support 
Adding flash API support to STM32F7 family. The code is derived from
F4 family one. The memory topology is described in flash_data.h files
and the flash_api.c implementation manages the 2 possible memory types (1
or 2 banks).
 2017-08-28 10:23:55 +02:00
Laurent MEUNIER e6631c02a4 STM32: adjust flash.get_page_size() to minimum programable size 
Users of FlashIAP usually get the minimum programable size
by calling flash.get_page_size(), so let's return the minimum
to allows a most efficient usage of flash.

For F4 devices, this is 1 byte.
For L0 and L1 devices, this is a word (4 bytes).
For L4 devices, this is a double word (8 bytes).
 2017-08-25 17:21:30 +02:00
Laurent MEUNIER 3de2ce9c10 STM32: Add Flash API support to STM32F413xH 
First add the flash_data.h that describe the flash memory topology,
and also activate FLASH support for the corresponding targets.

This is a 1,5MB flash memory device which contains 15 sectors, where
sectors 12 to 15 are 128KB sectors. So flash_api.c needed has been
updated to differentiate between this flash memory and the 2MB ones
by checking existence of sector 16 instead of sector 12.
 2017-08-25 17:21:30 +02:00
Laurent MEUNIER 4b62cf015c STM32: Add Flash API support to STM32F469xI 
First add the flash_data.h that describe the flash memory topology,
and also activate FLASH support for the corresponding targets.
 2017-08-25 17:21:08 +02:00
Laurent MEUNIER 86ad16f5f8 STM32: Add Flash API support to STM32F410RB 
First add the flash_data.h that describe the flash memory topology,
and also activate FLASH support for the corresponding targets.
 2017-08-25 17:20:40 +02:00
Laurent MEUNIER 645fd0f06d STM32: Add Flash API support to STM32F4 devices with 512KB Flash 
First add the flash_data.h that describe the flash memory topology,
and also activate FLASH support for the corresponding targets.
 2017-08-25 17:20:13 +02:00
Jimmy Brisson 3926b56cd8 Merge pull request #4935 from LMESTM/F410RB_ARM_TC 
STM32: fix F410RB vectors size
 2017-08-24 10:16:31 -05:00
Janne Kiiskilä 2e6cd907d4 UBLOX_ODIN_EVK_W2 - add BUTTON1/2 definitions 
UBLOX_ODIN_EVK_W2 is missing the abstract button definitions originally
introduced with PR https://github.com/ARMmbed/mbed-os/pull/4249.

Fix two tab to spaces issues on the go as well.
 2017-08-22 09:54:53 +03:00
Jimmy Brisson 316c875136 Merge pull request #4926 from bcostm/merge_l053x8 
STM32L053x8: Refactor NUCLEO_L053R8 and DISCO_L053C8 targets
 2017-08-21 10:38:42 -05:00
Jimmy Brisson bb7ab1942a Merge pull request #4896 from pilotak/patch-1 
target BLUEPILL_F103C8 compile fix
 2017-08-21 10:37:01 -05:00
Laurent MEUNIER d4fa585ac4 STM32: F1 GPIO: Enable AFIO clock 
It is required to enable AFIO clock before using __HAL_AFIO_REMAP_xy
macros, which was missing here. Without clocks enable, the remap
actually doesn't occur. This would possibly cause some PIOs (part of
PB_3, PB_4, PA_13, PA_14, PA_15) to not behave as expected.

In most cases AFIO clock was enabled in stm_pin_SetAFPin function, so
that this bug was not visible. But there were few cases left were
stm_pin_DisconnectDebug would be called first. A typical case was
with GCC_ARM in case a DigitalInOut variable is declared as global.
 2017-08-21 13:32:33 +02:00
Laurent MEUNIER 95fc6d0bad STM32: fix F410RB vectors size 
On F410RB, the size reserved to vectors with ARM toolchains was not properly
defined,which was not the case for other toolchains.

This would cause few tests to fail like EXAMPLE_1 with below error:

HOST: Unknown property: mbed assertation failed: _ptr == (T *)&_data, file: C:/github/mbed/BUILD/mbed/platform/SingletonPtr.h, line 91
 2017-08-18 11:57:51 +02:00
bcostm d0fce353cc STM32F4: Set ADC sample time to max value for VRefInt 2017-08-17 16:12:16 +02:00
Laurent MEUNIER 8c99bf3b62 SPI: HAL: disable IP at the end of transmit 
in case of 1LINE direction
 2017-08-17 11:02:43 +02:00
mapellil 6dfafc7293 STM32: SPI: Use LL in spi_slave_read 
this is more a cosmetic change, but since LL was introduced, we can now
use it here as well.
 2017-08-17 11:02:43 +02:00
Laurent MEUNIER 57371ea591 STM32: SPI: Do not enable SPI during Init if 3W 
Enabling SPI causes the clock to be output by default.

Most devices will not care about extra clock cycles, especially as long
as chip select is not active, nevertheless this may cause side issues
with other devices especially during init phase.

This was actually the case with a 3 wire device (LPS22HB sensor).
 2017-08-17 11:02:43 +02:00
mapellil 4f20cfc0be STM32: SPI: SPI3W / SPI_DIRECTION_1LINE management 
In case MISO is not passed at SPI init, then we consider a 3 wires SPI
configuration is requested, which corresponds to SPI_DIRECTION_1LINE
configuration parameter in STM32 HAL layer.

We're then handling this specific case of SPI_DIRECTION_1LINE,
in spi_master_write or spi_master_block_write, we call to HAL API
 2017-08-17 11:02:43 +02:00
bcostm 8273e371df STM32L053x8: Align system_clock.c files 2017-08-17 10:55:18 +02:00
bcostm 580c7cb0b6 STM32L053x8: cleanup ARM compiler files 2017-08-16 17:10:42 +02:00
bcostm 9b8bb9eec4 STM32L053x8: Move other folders and files 2017-08-16 17:10:42 +02:00
bcostm 04cefd300d STM32L053x8: Create folder and move objects.h 2017-08-16 17:10:42 +02:00
Jimmy Brisson 7653f65434 Merge pull request #4878 from jeromecoutant/PR_ADC_INTERNAL 
STM32 : internal ADC channels
 2017-08-14 11:42:30 -05:00
Jimmy Brisson 98720b0ae2 Merge pull request #4809 from betzw/betzw_ticker_github_wb 
STM32: Align HAL & US tickers
 2017-08-14 11:36:52 -05:00
Jimmy Brisson 25bcc2795e Merge pull request #4808 from betzw/betzw_idle_github_wb 
Make HAL & US tickers idle safe
 2017-08-14 11:36:35 -05:00
Jimmy Brisson 2766e56e3d Merge pull request #4801 from bcostm/fix_can_issue_4763 
STM32 CAN: Fix issue with speed function calculation
 2017-08-14 11:36:17 -05:00
Pavel Slama 2bc224bc2f target BLUEPILL_F106C8 compile fix 
INITIAL_SP missing when compile, here is a quick fix
 2017-08-13 15:32:11 +02:00
Jimmy Brisson 95ca29930f Merge pull request #4851 from janjongboom/stm32f4_wrong_erase 
STM32F4_HAL_MMC erase command check is wrong. == has higher precedence than &
 2017-08-10 09:38:25 -05:00
Wolfgang Betz e2dc67750c Make HAL & US tickers idle safe 2017-08-09 14:29:57 +02:00
jeromecoutant 54a32e0410 STM32L1 : internal ADC channels 2017-08-09 11:01:40 +02:00
jeromecoutant 726f207ee8 STM32L0 : internal ADC channels 2017-08-09 11:01:36 +02:00
jeromecoutant 27bf7d21d1 STM32F7 : internal ADC channels 2017-08-09 11:01:32 +02:00
jeromecoutant 803ab189fc STM32F4 : internal ADC channels 2017-08-09 11:01:27 +02:00
jeromecoutant 3826ad23f6 STM32F3 : internal ADC channels 2017-08-09 11:01:23 +02:00
jeromecoutant 63ccfa0958 STM32F1 : internal ADC channels 2017-08-09 11:01:19 +02:00
jeromecoutant aff3478519 STM32F0 : internal ADC channels 2017-08-09 11:01:14 +02:00
Martin Kojtal f200db3e84 STM32F4: fix for 2nd back sector 
Use ADDR_FLASH_SECTOR_12 as this is defined by target (the flash size varies, for
instance for some F437xx is up to 2MB (2nd bank might not be there)).
 2017-08-08 09:50:19 +01:00
Martin Kojtal c7dd95d9b8 STM32F437: remove flash api implementation 
STM32F4 already contains generic flash api implementation, use it.
 2017-08-08 00:13:47 +02:00
Jimmy Brisson 0e1c20d8e7 Merge pull request #4854 from adustm/STM32F412_flash_boot 
NUCLEO_F412ZG add flash driver and bootloader support
 2017-08-07 10:28:14 -05:00
Jimmy Brisson 9c81ba8766 Merge pull request #4835 from u-blox/c030_bootloader 
Add bootloader support for the UBLOX_C030 platforms.
 2017-08-07 10:27:56 -05:00
adustm 9d0e9dd8de Move DEVICE_FLASH define to avoid compilation issues for non FLASH devices 2017-08-04 10:09:27 +02:00
adustm 44c8d16243 Add bootloader support 2017-08-03 15:07:14 +02:00
adustm 8bd7b595d8 Move flash_api.c to STM32F4 level + add flash_data.h for STM32F412 device 
add FLASH to targets.json
 2017-08-03 14:14:05 +02:00
Jan Jongboom 54929f6aee STM32F4_HAL_MMC erase command check is wrong. == has higher precedence than & 2017-08-03 13:03:36 +02:00
Jimmy Brisson f08d5a496c Merge pull request #4623 from LMESTM/analogin_handle 
Improve management handling of multiple instances of analogin ojects
 2017-07-31 15:23:31 +00:00
Wolfgang Betz 4fe8e8ca44 Align HAL & US tickers 2017-07-25 13:25:09 +02:00
lordguilly 909a8343f5 Change HSE for blupill,can only be XTAL 
The BLUEPILL board does have XTAL soldered, cannot be used with an external oscillator
 2017-07-24 22:36:40 +01:00
Jimmy Brisson 1f94ede86c Merge pull request #4744 from deepikabhavnani/spi_issue_4743 
Allow user to set default transfer byte for block read
 2017-07-24 14:45:30 -05:00