For NUCLEO_F401RE, NUCLEO_F411RE, NUCLEO_F303RE, and DISCO_L475VG_IOT01A:
* Ensure the scatter files for the ARM toolchain use 2 region memory model.
The scatter files changes affects the following boards:
* NUCLEO_F401RE, STEVAL_3DP001V1 (stm32f401xe.sct)
* NUCLEO_F411RE, MTS_MDOT_F411RE, MTS_DRAGONFLY_F411RE, MTB_MTS_DRAGONFLY, SAKURAIO_EVB_01 (stm32f411re.sct)
* NUCLEO_F303RE, NUCLEO_F303ZE (stm32f303xe.sct)
* DISCO_L475VG_IOT01A, MTB_STM_L475 (stm32l475xx.sct)
* Remove the TOOLCHAIN_ARM_MICRO directories.
* Remove release_version as not necessary and as the targets can also run
Mbed OS 6.
* Remove uARM support for all FAMILY_STM32 targets.
The clock source selection of LPUART depends on System clocks but also on
the serial baudrate. There is a specific computation done in serial driver
targets/target_STM/serial_api.c
At first start-up the LPUART1 clock selected in SetSysClock was anyway
overridden by the serial driver, so this was of no effect. But in case
of deep sleep SetSysClock is called again, while the driver isn't, so
SetSyClock was corrupting the serial clock configuration.
So let's remove these few lines of code which are causing trouble.
The existing logic was insufficient to properly handle odd and even
parity setting, e.g. serial_getc() returned 9-bit data for 8O1
transmission format.
All targets must implement soft_- and hard_power_on/off() functions which are practically same what onboard_modem_api offered.
These were seen as a duplicate features and therefore we removed this.
All targets involved have been updated to reflect the changes
* Change "is supported" check to be a macro, so it can be done at
compile-time.
* Eliminate weird shift on 7-bit CRCs.
* Add support for 32-bit CRCs and reversals to TMPM3HQ.
* Change "is supported" check to be a macro, so it can be done at
compile-time.
* Eliminate weird shift on 7-bit CRCs.
* Add support for 32-bit CRCs and reversals to TMPM3HQ.
ARM Compiler 6.13 testing revealed linker errors pointing out
conflicting use of `__user_setup_stackheap` and
`__user_initial_stackheap` in some targets. Remove the unwanted
`__user_initial_stackheap` from the targets - the setup is
centralised in the common platform code.
Looking into this, a number of other issues were highlighted
* Almost all targets had `__initial_sp` hardcoded in assembler,
rather than getting it from the scatter file. This was behind
issue #11313. Fix this generally.
* A few targets' `__initial_sp` values did not match the scatter
file layout, in some cases meaning they were overlapping heap
space. They now all use the area reserved in the scatter file.
If any problems are seen, then there is an error in the
scatter file.
* A number of targets were reserving unneeded space for heap and
stack in their startup assembler, on top of the space reserved in
the scatter file, so wasting a few K. A couple were using that
space for the stack, rather than the space in the scatter file.
To clarify expected behaviour:
* Each scatter file contains empty regions `ARM_LIB_HEAP` and
`ARM_LIB_STACK` to reserve space. `ARM_LIB_STACK` is sized
by the macro `MBED_BOOT_STACK_SIZE`, which is set by the tools.
`ARM_LIB_HEAP` is generally the space left over after static
RAM and stack.
* The address of the end of `ARM_LIB_STACK` is written into the
vector table and on reset the CPU sets MSP to that address.
* The common platform code in Mbed OS provides `__user_setup_stackheap`
for the ARM library. The ARM library calls this during startup, and
it calls `__mbed_user_setup_stackheap`.
* The default weak definition of `__mbed_user_setup_stackheap` does not
modify SP, so we remain on the boot stack, and the heap is set to
the region described by `ARM_LIB_HEAP`. If `ARM_LIB_HEAP` doesn't
exist, then the heap is the space from the end of the used data in
`RW_IRAM1` to the start of `ARM_LIB_STACK`.
* Targets can override `__mbed_user_setup_stackheap` if they want.
Currently only Renesas (ARMv7-A class) devices do.
* If microlib is in use, then it doesn't call `__user_setup_stackheap`.
Instead it just finds and uses `ARM_LIB_STACK` and `ARM_LIB_HEAP`
itself.
The TC flag is used in function serial_is_tx_ongoing to check if there is
an ongoing serial transmission. So this Flag must not be cleared at the
end of the transmission, otherwise, serial_is_tx_ongoing will notify that
TX is ongoing.
The impact is that it may prevent deep sleep to be entered.
Also there is no need to clear this flag at the end of the transaction
because it will be cleared automatically by HW when a new transmission
starts.
For STM32 platforms that embed an OSPI IP, we're offering
a QSPI fallback support with this commit.
When OSPI is supported in mbed, we can consider adding full
OSPI support
To have the flexibilty in application; to use any of the section
(data/bss/heap) without updating linker script in every use case,
following decisions are made:
1. Fixed size and small sections moved to SRAM2 (32K)
Vectors
Crash data
Remaining section - RW / ZI
2. Large memory space should be used for variable sections
RW/ZI
Heap - (Minimum - 0x12000)
Stack - At bottom
Please note the heap address of the both the banks must not be contigious else
GCC considers it to be single memory bank and does allocation across the banks,
which might result into hard-fault
To have the flexibilty in application; to use any of the section
(data/bss/heap) without updating linker script in every use case,
following decisions are made:
1. Fixed size and small sections moved to SRAM2 (32K)
Vectors
Crash data
Stack
Remaining section - Heap memory
2. Large memory space should be used for variable sections
Data
BSS
Heap - Remaining section
Heap is moved to the end of both sections as GCC allocates till 4K boundary,
if end of heap is not aligned to 4K, that chunk of memory will go unutilized
Instead of user defined symbols in assembly files or C files,
use linker scripts to add heap and stack - this is inconsistent
with ARM std linker scripts
jeromecoutant
Hugues Kamba
Marcelo Salazar
Martin Kojtal
Laurent Meunier
Przemyslaw Stekiel
Filip Jagodzinski
pea-pod
Leon Lindenfelser
Antti Kauppila
Anna Bridge
Alexandre Bourdiol
Kevin Bracey
Seppo Takalo
Yuan Cao
Vincent Veron
Guillermo Alonso
Juho Eskeli
Deepika
Marcus Chang
Cruz Monrreal
bcostm
Guillermo Alonso