they have two RAMs at two distinct locations:
RAM1 (address: MBED_RAM_START, size: MBED_RAM_SIZE):
* stack
* heap
* some part of static memory
RAM2 (address: MBED_IRAM2_START, size: MBED_IRAM2_SIZE):
* remaining part of static memory starting at MBED_IRAM2_START
* crash report
* vector
The heap size was incorrectly calculated.
This fixes it by subtracting the Stack size, any memory chunks allocated
before the start of the application (for vectors and/or crash report), and
finally the size of the application from the total RAM size.
The clock source selection of LPUART depends on System clocks but also on
the serial baudrate. There is a specific computation done in serial driver
targets/target_STM/serial_api.c
At first start-up the LPUART1 clock selected in SetSysClock was anyway
overridden by the serial driver, so this was of no effect. But in case
of deep sleep SetSysClock is called again, while the driver isn't, so
SetSyClock was corrupting the serial clock configuration.
So let's remove these few lines of code which are causing trouble.
For targets L496 and L5.
Taking into account device TRNG in L5 configuration
mbed-os consists of mbed-core and mbed-rtos
mbed-baremetal consists of mbed-core
The main change is for mbed-core. Changing from object library to be interface. This way it allows us to do the above to have 2 main targets for users to use.
This should be backward compatible change as mbed-os target we used contains the same files/options as previously set.
Directories that start with special prefixes (TARGET_, FEATURE_, COMPONENT_) are added to the build based on Mbed target configuration from targets.json instead of calling utility function mbed_add_cmake_directory_if_labels().
Add license identifier to files which Arm owns the copyright to,
and contain either BSD-3 or Apache-2.0 licenses. This is to address
license errors raised by scancode analysis.
Workaround a bug where the boot stack size configuration option is not
passed on to armlink, the Arm Compiler's linker. Prefer
MBED_CONF_TARGET_BOOT_STACK_SIZE if present, as this is what the
configuration system should provide. Fall back to MBED_BOOT_STACK_SIZE
if MBED_CONF_TARGET_BOOT_STACK_SIZE is not defined, as in the case of
buggy tools. If both MBED_CONF_TARGET_BOOT_STACK_SIZE and
MBED_BOOT_STACK_SIZE are not defined, then we fall back to a hard-coded
value provided by the linkerscript. See
https://github.com/ARMmbed/mbed-os/issues/13474 for more information.
To allow overriding of the boot stack size from the Mbed configuration
system, consistently use MBED_CONF_TARGET_BOOT_STACK_SIZE rather than
MBED_BOOT_STACK_SIZE.
Fixes#10319
Martin Kojtal
jeromecoutant
Hugues Kamba
pea-pod
Leon
reme
Leon
Rajkumar Kanagaraj
Rajkumar Kanagaraj
Harrison Mutai
rogeryou
Jaeden Amero