Merge pull request #13583 from jeromecoutant/PR_ARDUINO_PIN

STM32: correct few Arduino pins value

targets/TARGET_STM/TARGET_STM32F2/TARGET_NUCLEO_F207ZG/PinNames.h

@@ -266,7 +266,7 @@ typedef enum {
     USBRX       = STDIO_UART_RX,
     I2C_SCL     = D15,
     I2C_SDA     = D14,
-    SPI_MOSI    = PB_5, // Conflict between D11 and RMII RX Data Valid (PA7)
+    SPI_MOSI    = D11, // Warning: Conflict between D11 and RMII RX Data Valid (PA7)
     SPI_MISO    = D12,
     SPI_SCK     = D13,
     SPI_CS      = D10,

targets/TARGET_STM/TARGET_STM32F3/TARGET_STM32F303xE/TARGET_NUCLEO_F303ZE/PinNames.h

@@ -243,7 +243,7 @@ typedef enum {
     A4          = PD_12,
     A5          = PD_13,
     D0          = PC_5,
-    D1          = PC_14,
+    D1          = PC_4,
     D2          = PF_15,
     D3          = PE_13,
     D4          = PF_14,

targets/TARGET_STM/TARGET_STM32L0/TARGET_STM32L072xZ/TARGET_DISCO_L072CZ_LRWAN1/PinNames.h

@@ -101,13 +101,16 @@ typedef enum {
     ADC_TEMP = 0xF0,
     ADC_VREF = 0xF1,
 
+    // Not connected
+    NC = (int)0xFFFFFFFF,
+
     // Arduino connector namings
     A0          = PA_0,
-    A1          = PA_0, // Alias
+    A1          = NC,   // PA_0 if SB7 fitted
     A2          = PA_4,
-    A3          = PA_4, // Alias
-    A4          = PB_9, // SB11 must be closed
-    A5          = PB_8, // SB12 must be closed
+    A3          = NC,   // PA_4 if SB7 fitted
+    A4          = NC,   // PB_9 if SB11 closed
+    A5          = NC,   // PB_8 if SB12 closed
     D0          = PA_3,
     D1          = PA_2,
     D2          = PA_10,
@@ -174,9 +177,6 @@ typedef enum {
     SYS_VREF_OUT_PB1 = PB_1,
     SYS_WKUP1 = PA_0,
     SYS_WKUP2 = PC_13,
-
-    // Not connected
-    NC = (int)0xFFFFFFFF
 } PinName;
 
 #ifdef __cplusplus

targets/TARGET_STM/TARGET_STM32L4/TARGET_STM32L433xC/TARGET_NUCLEO_L433RC_P/PinNames.h

@@ -165,8 +165,8 @@ typedef enum {
     A3          = PC_2,
     A4          = PC_1,
     A5          = PC_0,
-    D0          = PA_2,
-    D1          = PA_3,
+    D0          = PA_10,
+    D1          = PA_9,
     D2          = PA_12,
     D3          = PB_3,
     D4          = PB_5,

targets/TARGET_STM/TARGET_STM32L5/TARGET_STM32L552xx/TARGET_NUCLEO_L552ZE_Q/PinNames.h

@@ -231,8 +231,8 @@ typedef enum {
     A3          = PB_0,
     A4          = PC_1,
     A5          = PC_0,
-    D0          = PD_8,
-    D1          = PD_7,
+    D0          = PD_9,
+    D1          = PD_8,
     D2          = PF_15,
     D3          = PE_13,
     D4          = PF_14,

targets/targets.json

@@ -2469,6 +2469,9 @@
             "EXTRA_IDLE_STACK_REQUIRED",
             "MBED_TICKLESS"
         ],
+        "device_has_remove": [
+            "ANALOGIN"
+        ],
         "overrides": {
             "lpticker_delay_ticks": 0
         },