8013d15876
Modify ticker driver to make consistent with Pull Reqest#839 and #864 .
...
timestamp_t type had been changed from uint64_t to uint32_t by Reqest#839 and #864 .
2015-01-29 16:41:35 +09:00
4d371d2c9e
Add include mbed_assert.h.
2015-01-29 16:41:08 +09:00
88604ff8fe
Add some processing of I2C driver
...
Changes are as below
- Add STOP condition omission processing of I2C Master
- Add I2C Slave processing
2015-01-29 16:40:16 +09:00
44b4fb4b41
Modify some processing of AnalgIn.
...
Modifies are as below.
- Change the A/D conversion time to run fast.
- Change the macro value of ANALOGIN_MEDIAN_FILTER
1 -> 0
2015-01-29 16:38:48 +09:00
83712b1f83
Add Serial flow control and fix a bug that parity setting is wrong.
...
Modifies are as below.
- Add flow control
- Change the range of baud rate that can be set in the baud function.
8138 bps more -> 128 bps more
- Fixed a bug that designation of parity had been reversed in format().
2015-01-29 16:38:21 +09:00
25131013bd
Add RTC function.
...
User can use set_time() and time() by this addition.
2015-01-29 16:37:41 +09:00
04937dc38b
remove json, delete toolchain list in target.py because NNN40 is inherit from NRF51822, add SWIO default setting in system_nrf51822.c and SWIO,VERF pin in PinName.h
2015-01-29 13:46:58 +08:00
9cdef7e725
Merge pull request #872 from bcostm/master
...
NUCLEO_F303RE - Corrections in ADC
2015-01-28 12:13:10 +01:00
46317484f7
[NUCLEO_F303RE] Corrections in ADC
...
- remove unavailable ADCs and channels
- correct initialization routine
2015-01-28 11:06:44 +01:00
fd82a674ab
Update serial_api.c
...
Fixed the incorrect clocksource for the baud generator. Should be MainClock instead of SystemCoreClock. This also allows the correct use of the PLL for MainClock and SystemCoreClock without breaking the serial baudrate.
2015-01-27 21:04:17 +01:00
453e81fd4c
Merge branch 'pinology' of https://github.com/PrzemekWirkus/mbed into PrzemekWirkus-pinology
...
Conflicts:
libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_DISCO_F401VC/cmsis_nvic.c
2015-01-27 14:15:48 +01:00
48aed8e75f
remove DFCM_NNN40 PinMap_ADC
2015-01-27 15:34:33 +08:00
8c14c0600d
Merge pull request #853 from mstevanovic/nucleo103_gpio_irq
...
Targets - Gpio irq hal with max num of irq for Nucleo 103RB
2015-01-27 08:14:29 +01:00
f578ea38f7
delet rtc_api.c
2015-01-27 15:07:57 +08:00
c1bba47649
Merge pull request #862 from Willem23/master
...
I2C blockread and blockwrite fixed for LPC812
2015-01-27 08:07:28 +01:00
7b4f177cdb
remove older target
2015-01-27 14:56:59 +08:00
4a52c80ef5
solve conflict targets.py and i2c_api.c
...
Merge remote-tracking branch 'upstream/master'
Conflicts:
libraries/mbed/targets/hal/TARGET_NORDIC/TARGET_MCU_NRF51822/i2c_api.c
workspace_tools/targets.py
2015-01-27 14:16:17 +08:00
ea2a3c27a0
Assigned a value to pin variable
2015-01-26 21:47:28 +01:00
1fca34a068
HAL - NRF51822 - us ticker fix for the #839
...
There was a project header file which does not exist in mbed SDK, neither
some defines used from it most probably. This commit reverts those parts.
2015-01-26 15:32:14 +01:00
e979bd60eb
Merge pull request #839 from rgrover/master
...
switching timestamp_t back to 32-bits.
2015-01-26 15:13:08 +01:00
2c2ab2cb06
Merge pull request #861 from NitinBhaskar/master
...
On-Board SD Card support for LPC11U37H_401 board
2015-01-26 06:46:38 +00:00
3b7d9635b7
I2C blockread and blockwrite fixed for LPC812
...
Quick fix of block read and write. The i2c_start is still wrong: it
should setup the address before initiating a Start condition. Status
read is also wrong in i2c_do_read.
2015-01-24 20:59:01 +01:00
19fd60321b
On-Board SD Card support added, SD Card related test cases updated too
2015-01-24 22:57:01 +05:30
627714908d
Removed the mbed_mac_address override as it is not needed on the LPC4088_DM
2015-01-24 12:33:02 +01:00
66a5f716e3
modify i2c_api, analog_api, system_brf51822.c, targets/py and add device.h, PinNames
2015-01-23 16:40:26 +08:00
4a2f3e00fe
Fixed review comments
2015-01-21 10:22:02 +01:00
cbebd63a2c
Added LPC4088_DM HAL
2015-01-21 10:19:35 +01:00
b223f83441
Updated gpio irq hal with max num of irq
...
- EXTI lines 5 to 9
- EXTI lines 10 to 15
2015-01-20 21:40:05 +01:00
befdc7ae6b
Merge pull request #847 from ytsuboi/master
...
LPC1114 - remove reset pin name to protect people. [LPC824] I2C pin names were crossed
2015-01-19 12:54:52 +00:00
f38d985cc8
Initial support for LPC11U37H_401
2015-01-17 13:29:17 +05:30
5b8a42ffe9
[LPC824] I2C pin names were crossed
2015-01-17 01:33:22 +09:00
7c55ec9590
[LPC1114] remove reset pin name to protect people.
...
If user set P0_0 as DigitalOut and set it to low, LPC1114 will be in
reset condion. To avoid this situation, p4, xp4 and dp23 was removed
from PinNames.h.
2015-01-17 00:41:17 +09:00
e21c65041d
New platform - Teensy 3.1
2015-01-15 19:18:01 +00:00
fb2ed14768
[NUCLEO_F303RE] Correct ADC initialization
...
Same as #809
2015-01-12 16:30:05 +01:00
7a3d2b4423
Merge pull request #837 from bcostm/master
...
NUCLEO_F070RB - Update tests
2015-01-12 08:14:44 +00:00
47725f9123
Merge pull request #835 from masaohamanaka/master
...
RZ_A1H - Fix some bugs about InterruptIn, SPI, I2C and modify some settings.
2015-01-12 08:14:02 +00:00
f7a78073e8
add 1 to the scheduler-op pool to allow deleting a timer whilst in its handler.
...
Please note that this commit goes with another recent commit to the nRF51822 repository which updated values under projectconfig.h. Please remember to update nRF51822 as well.
This has a bearing on issue #832 .
2015-01-09 13:19:55 +00:00
e7a9c01708
update us_ticker_appTimerRunning after a call to app_timer_stop()
2015-01-09 12:43:18 +00:00
c18633dcf2
switching timestamp_t back to 32-bits.
...
The underlying us_tickers used for comparison are still 32-bits; keeping a 64-bit timestamp isn't going to be useful.
fixes #838
2015-01-09 12:42:55 +00:00
321f012f06
[NUCLEO_F070RB] Add missing line (same as F072RB)
2015-01-09 11:32:49 +01:00
4004624a1f
Add comments.
...
Add comments to provide details about this code.
2015-01-09 13:50:41 +09:00
2acefb66eb
Merge pull request #809 from bcostm/master
...
NUCLEO_F334R8 - Fix issue with multiple ADC initialization
2015-01-08 11:57:52 +00:00
bef46907fc
Merge pull request #831 from ohagendorf/stm32f4xx_reorg_hal
...
STM32F4xx reorganisation of hal folder
2015-01-08 11:53:03 +00:00
90cf47ffdf
Fix some bugs about IntreruptIn.
...
Bugs are as below.
- Add terminal setting of IRQ4 and IRQ6 that leaked.
- When set the interrupt function by rise()/fall(), the interrupt disable state will be released by disable_irq().
- Interrupt will be continued to occur when execute disable_irq() after rise(NULL)/fall(NULL) set.
- Fix the setting timing of PMC register.
2015-01-07 19:11:14 +09:00
f119a368e5
Fix the bug that a noise will occur in SPI.
...
A noise will occur when execute frequency() after set the "mode" to 3 by format().
2015-01-07 19:10:49 +09:00
b13b047a76
Implement a stop condition transmission setting function of I2C.
...
User can specify the sending of STOP condition by this implement.
2015-01-07 19:10:26 +09:00
808c3b4d7c
Take measures about optimization problems of web compiler.
2015-01-07 19:09:22 +09:00
716c51d232
Deleting doubled files
2015-01-06 00:35:57 +01:00
f2a6eeca8d
[NUCLEO_F334R8] Correct the code used during initialization
2015-01-05 14:47:38 +01:00
ad9b6a7119
Merge branch 'master' of https://github.com/mbedmicro/mbed
2015-01-05 14:14:41 +01:00
914dd37b11
Merge pull request #818 from ohagendorf/stm32l053_rtos
...
DISCO/NUCLEO_L053xx - adding to RTOS, corrections for all tests, [DISCO_L053] exporter to µVision
2015-01-05 08:08:00 +01:00
3aef1389d5
Merge pull request #829 from Kazu-zamasu/LPC824-GCC_CR
...
Tools: LPC824 - GCC_CR support
2015-01-05 07:55:21 +01:00
f98dd149b9
[MTS_MDOT_F405RG] reorg hal folder
...
- reorganisation of this target needed some extension of serial_api.c
used by all F4xx tagets.
- add arch_max to travis_build
2015-01-04 14:15:16 +01:00
0498e2619b
[STMF4xx] reorg hal folder
...
- some minor error correction
- add pin definition for 3 tests (MBED_A5,6,7)
- add new target disco_f401vc to travis_build
travis_build and all test are OK except missing STM32F4 target
MTS_MDOT_F405RG
2015-01-04 14:14:52 +01:00
3d886a94dc
[MTS_DRAGONFLY_F411RE] reorg hal folder
2015-01-04 14:11:32 +01:00
41975149c2
[DISCO_F407/ARCH_MAX] reorg hal folder
2015-01-04 14:11:03 +01:00
3a2ec50d0e
[DISCO_F429ZI] reorg hal folder
2015-01-04 14:10:34 +01:00
cf8c8689e6
[NUCLEO_F411][MTS_MDOT_F411] reorg of hal folder
2015-01-04 14:07:43 +01:00
484d9359ba
[DISCO/NUCLEO_F401xx] reorg of hal folder
2015-01-04 14:06:51 +01:00
b066ebff90
Add to GCC_CR
...
New create GCC_CR LPCXPresso export.
2015-01-04 12:02:01 +09:00
43e6502f00
[DISCO_F401VC] new target incl. exporter to gcc_arm and coide
2015-01-02 19:09:41 +01:00
ad6e208c7e
[DISCO_L053xx] RTC LSE/LSI problem
...
The mcu STM32L053C8 seems to have a problem in the RCC - LSE hardware
block. The Disco_L053 don't have a 32kHz crystal connected to LSE port
pins in contrast to NUCLEO_L053.
During initialization the HAL tests if it can start the LSE oscillator.
The Flag LSERDY in RCC_CSR is set to 1 by RCC clock control when the
oscillator runs stable. Without a crystal the flag shouldn't be set and
the HAL trys to start the internal LSI oscillator.
But the flag is always set to 1 also without a crystal. That's why the
RTC doesn't start.
2015-01-02 12:17:35 +01:00
32f5b97aa7
[DISCO_L053xx] wrong STDIO UART
...
Correction of a wrong stdio uart - some tests failed because of this.
2015-01-02 12:17:35 +01:00
0ac123d488
[DISCO/NUCLEO_L053xx] adding to RTOS
2015-01-02 12:13:44 +01:00
d198fba547
Merge pull request #821 from ohagendorf/exporter_coide_gccarm
...
NUCLEO/DISCO L053,F103,F100,F051 - adding exporter to gcc_arm and coide
2015-01-02 09:04:06 +01:00
7234182bfd
Merge pull request #817 from masaohamanaka/master
...
RZ_A1H - Modify frequency setting processing of SPI
2015-01-02 08:26:57 +01:00
77d645476d
Merge pull request #810 from ohagendorf/STM32F3xx_rtos
...
DISCO/NUCLEO_F3xx - solving RTOS problem
2015-01-02 07:48:54 +01:00
9af828a11f
Merge branch 'master' of https://github.com/mfiore02/mbed into mfiore02-master
...
Conflicts:
workspace_tools/build_travis.py
2015-01-02 07:12:11 +01:00
aaede9c070
[DISCO_F051R8] exporter to coide and a naming correction
...
In PeripheralNames.h the PWM timer name was wrong. Changed from TIMxx to
PWMxx.
2014-12-31 17:46:32 +01:00
6126cb7b41
Modify frequency setting processing of SPI
...
In case of off-line compiler, there is no problem about the frequency setting processing.
But in case of online compiler, the frequency setting processing will be error.
So, modify frequency setting processing of SPI to pass in online compiler.
2014-12-26 17:40:42 +09:00
7b62e7d5d6
[LPC4337] Remove init variable for RTC
...
- Remove static variable for initialization check
- Add enabled flag check for RTC control register
2014-12-25 09:41:33 +09:00
44c66b1062
[LPC4337] Fix RTC clock setting issue
...
- Fixed missing RTC clock intialization code
- Confirm to pass RTC test case (MBED_16)
2014-12-24 18:09:47 +09:00
e48aabed4c
[DISCO/NUCLEO_F3xx] solving RTOS Problem
...
- add targets (except DISCO_F303VC) to tests.py - RTOS_x tests
- a minor bug fix for DISCO_F334: had wrong STDIO_UART_TX/RX pin
settings
2014-12-22 16:58:42 +01:00
ef626d7f68
[NUCLEO_F334R8] Fix issue with multiple ADC initialization
2014-12-22 11:04:02 +01:00
6fa4b469f4
Decorated all HALs with gpio_is_connected() function implementation
2014-12-19 13:37:16 +00:00
a53cd59b51
Added is_connected() method to Digital I/O classes APIs (DigitalIn, DigitalOut and DigitalInOut
2014-12-19 13:31:54 +00:00
b7f4d17aae
Added new GPIO HAL function gpio_is_connected() used to check if gpio_t is connected or initialized with NC
...
Simple gpio_t structure in TARGET_KPSDK_MCUS field name changed to allign to other HALs
2014-12-19 13:14:53 +00:00
bd803e5944
Merge pull request #805 from molejar/dev-freescale-kl43z
...
Targets: KL43Z - Fix some issues in serial, usb device and pins names
2014-12-19 11:10:08 +00:00
1eb8d7cab4
Added serial_get_src_clock() function into serial_api.c and fastirc_frequency() function into clk_freqs.h for better portability.
2014-12-19 10:55:37 +01:00
79ec104b3c
Merge pull request #801 from bcostm/master
...
Add new target - NUCLEO_F070RB
2014-12-19 09:48:14 +00:00
078c36b1c5
Merge pull request #802 from masaohamanaka/master
...
Targets: RZ_A1H - Fix some drivers bugs and modify some settings of OS and
2014-12-19 08:53:10 +00:00
bb969921ec
Fixed baudrate calculation issue in serial_api.c, arduino compatible pins name and USB device for Freescale KL43Z Target
2014-12-18 22:37:11 +01:00
0279c2a2ee
Modify some settings of OS and Ether
...
- Change default setting of CMSIS-RTOS RTX for Cortex-A9 to align with Cortex-M.
- Change the interrupt priority of Ether driver to align with other drivers.
2014-12-18 18:41:33 +09:00
e91e953a60
Fix some drivers bugs.
...
Changes as below.
-I2C
Change communication wait time and Frequency accuracy improvement of I2C.
- Frequency accuracy improvement
- Changed the wait time between one communication completed and the next communication start.
The wait time will be Low clock width by this changing.
-PWM
Modify processing of pulsewidth() of PWM
- Modify processing of pulsewidth() to match the specifications of the RZ_A1H.
-SPI
Fixed a bug that SPI driver is not able to communicate when transfer bit length is 16bit or 32bit.
- Frequency accuracy improvement
- Modify transfer processing when transfer bit length is 16bit or 32bit.
-Serial
Change the reference register macro of Serial
- Change the reference register macro to align with other driver codes.
2014-12-18 18:40:44 +09:00
6234082237
[NUCLEO_F070RB] Add new target - part 2 hal
2014-12-18 09:29:13 +01:00
8d2fa50691
add new target BLE_SMURFS
2014-12-17 11:40:09 +08:00
429ff2731d
[mbed][MTS_DRAGONFLY_F411RE] fix reversed uart pins after rebasing from master
2014-12-15 15:05:07 -06:00
29bd94927e
updating app_timer.c from Norid'c SDKv7.1.0; hoping to fix the hangs reported around timers
2014-12-15 15:59:48 +00:00
6172cbea1a
Merge pull request #785 from rosterloh/disco_l053_hal_updates
...
Targets: DISCO_L053C8 - update from nucleo latest changes
2014-12-15 09:15:42 +00:00
fb526c9205
Merge pull request #784 from masaohamanaka/master
...
Targets: RZ_A1H - Add the timer value wraparound processing to us_ticker
2014-12-15 08:55:35 +00:00
8e3b9aba75
Add terminal defines of PWM and fix a bug that period can not be changed.
...
Fix a bug as below.
- Period can not be changed.
Restructions: 1. The upper limits is 491us
2. Change all period of the same channel when changing period.
2014-12-12 14:26:33 +09:00
fc7e246596
Remove needless processing regarding Interrupt.
...
EOIR writing will be done in IRQ handler.
EOIR writing is needless in each interrupt processing.
2014-12-12 14:25:41 +09:00
7417e1061d
Add some terminal setting of Serial and modify attach sequence.
...
Fix some bugs of Serial as below.
- TX/RX terminal of XBee(P7_4, P7_5) setting is reverse.
- P5_6 and P5_7 terminals can not be used.
- Tx interrupt will not occur at the right timing.
- There are no settings of WIFI Module terminals(P11_10,P11_11).
- There are no settings of Xbee Module terminals(P6_6,P6_7).
2014-12-12 14:25:08 +09:00
22a3c528c8
[mbed][MTS_DRAGONFLY_F411RE] remove old Dragonfly Directory
2014-12-11 14:02:13 -06:00
883215c80e
Merge branch 'dev_new' into dev
...
Conflicts:
workspace_tools/export/iar.py
workspace_tools/targets.py
2014-12-11 13:54:19 -06:00
743bf2b255
[mbed][MTS_DRAGONFLY_F411RE MTS_MDOT_F411RE NUCLEO_F411RE] remove unnecessary Dragonfly hal files & move PeripheralNames.h to mDot and Nucleo dirs to perserve differences from Dragonfly
2014-12-11 13:48:06 -06:00
83d03f35e5
[mbed][MTS_DRAGONFLY_F411RE] move Dragonfly support into TARGET_STMF411RE with rest of 411 products
2014-12-11 13:38:29 -06:00
4ade9b7ac3
[mbed][MTS_DRAGONFLY_F411RE] fix D2 pin mapping, remove PWM_OUT from PinNames.h
2014-12-11 13:20:45 -06:00
2a5c204fa2
[mbed][MTS_DRAGONFLY_F411RE] fix pin names for spi to external flash
2014-12-11 13:20:45 -06:00
7a217c3fb5
[mbed][MTS_DRAGONFLY_F411RE] remove unnecessary VIMPINNAMES file
2014-12-11 13:20:45 -06:00
340b40ff1a
[mbed][MTS_DRAGONFLY_F411RE] add RADIO_TX/RX pins, correct reversed TX/RX pins for uart6
2014-12-11 13:20:45 -06:00
f41a29e14c
[mbed][MTS_DRAGONFLY_F411RE] clean up PinNames.h
2014-12-11 13:20:45 -06:00
6d9d5961c5
[mbed][MTS_DRAGONFLY_F411RE] fix stdio uart decl, fix D3 pin decl, change blinky test main.cpp back to original
2014-12-11 13:20:45 -06:00
546005a72c
[mbed][MTS_DRAGONFLY_F411RE] added platform support files and dirs built gcc executable NOT working
2014-12-11 13:20:45 -06:00
77c3fe2358
updated latest changes from nucleo
2014-12-11 14:55:45 +00:00
c08208fe4f
Update upstream pushed files
2014-12-11 19:26:03 +09:00
54999646a1
[NUCLEO_L053R8] Removed call to Systick (mbed RTOS compliancy)
2014-12-11 11:16:02 +01:00
1970328da3
Add the timer value wraparound processing to us_ticker
...
Timer value wraparound operation had not been considered in us_ticker.
So, User could not set upper than 128s to argument of wait().
2014-12-11 19:07:50 +09:00
f71b0a06c7
Revert "Add the timer value wraparound processing to common wait processing"
...
This reverts commit cd8f65c94b
2014-12-11 18:21:43 +09:00
b75dadac6c
Merge pull request #779 from ndelisi/master
...
Y5Design LPC11U35 and NRF51822 - Add New targets
2014-12-11 08:28:29 +00:00
cd8f65c94b
Add the timer value wraparound processing to common wait processing
...
Timer value wraparound operation had not been considered in common wait process.
By defining the EXPIRE_US non-zero value, wraparound operation is enabled.
The EXPIRE_US will be define the value of each vender-specific.
If EXPIRE_US is 0, the common wait process is same as before.
2014-12-11 14:32:09 +09:00
91a77d74cf
With the old logic if Serial::writeable() was called before and/or used to block calls to Serial::putc() it would never write due to EVENT_TXDRDY trailing a write to TXD. Add a dummy write to TXD before pins are connected to the peripheral. This primes the EVENT_TXDRDY to lead future writes rather than trail. Since STOPTX isn't used this seems safe.
2014-12-09 17:48:10 -06:00
a03d3bcd8d
Porting of new target: Added new target to target.py, added header files for PinNames.h and device.h
...
nRF51822 from Nordic Semiconductor
Bluetooth Low-Energy v4.1 compliant - interface to smartphones, tablets
System-on-Chip (SoC) solution - easily transformable into a deployable solution
Drop-in solution for production - no need to design your own antenna
FCC and CE Certified
3x LEDs, 3x Buttons
Powered by interface board or external 3.3V
2014-12-09 14:08:22 -06:00
f382af4aed
Porting of new target: Added new target to target.py, added header files for PinNames.h and device.h. Added linker library.
...
Y5 Design LLC Interface Board
LPC11u35 from NXP
Low Power, ARM(r) Cortex-M0 suitable for a wide range of applications
On-Chip Bootloader - In-System programming (ISP) and in-application programming (IAP)
ROM-based USB drivers - Flash updates via USB supported
SPI, GPIO, i2C, UART, ADC
3x LEDs, Reset Button
3.3V powered via USB or external
USB interface - shipped with USB-A, male connector, pads for Micro female
2014-12-09 13:01:20 -06:00
a36eb12b2f
Targets: Freescale KSDK - extern } syntax error fix
2014-12-09 14:52:17 +00:00
a96ad0576f
Merge pull request #760 from bcostm/master
...
Targets: NUCLEO_F072RB/F091RC - Remove the call to Systick
2014-12-09 14:31:45 +00:00
0f2b2cdf09
Merge pull request #762 from masaohamanaka/master
...
Targets: RZ_A1H - Fix some bugs about I2C, SPI, Interruptin and add terminal definition of user button.
2014-12-09 14:27:50 +00:00
75673df767
Merge pull request #772 from mbrudevoldlpd/master
...
Add support for mDot with STM32F411RE processor
2014-12-09 14:13:28 +00:00
35ba8d709f
Merge pull request #774 from Sissors/ksdk
...
Targets: K20D50M - Serial baudrate improvements / clk_freqs.h fix
2014-12-09 14:01:54 +00:00
a6c9b1c40b
[HAL][K20D50M] Serial baudrate improvements / clk_freqs.h fix
...
Three changes, first it fixes:
https://github.com/mbedmicro/mbed/issues/761 (which was reported
slightly wrong because K20 has again different clocking from KLXX for
uarts).
Second it adds mcgpllfll to clk_freqs, which again is different for K20
compared to KLXX .
Finally it adds the fractional baudrate divider for more accurate serial
baudrates.
2014-12-08 21:15:24 +01:00
2f5cbcb1c6
Add support for mDot with STM32F411RE processor
2014-12-08 10:58:25 -06:00
0b512e5e6f
Change I2C driver transfer sequence
...
Change I2C driver transfer sequence to go according to H/W manual.
Changed contents are as below.
- Access procedure of ACTBT bit of MR3 register
- Issuance procedure of stop condition
2014-12-08 16:47:28 +09:00
fb0eb349dd
Merge pull request #766 from ohagendorf/reorg_hal_stm324
...
Targets: DISCO_F4xx - add PeripheralPins.c/.h
2014-12-08 07:25:11 +00:00
48448527bd
Fix a bug that usticker wait interval is not constant.
...
When read the timer value, it have a potential to read abnormal value.
Because we used 16bit + 16bit cascade timer and read timer count separately.
Changed usticker timer from 16bit + 16bit cascade timer to 32bit timer to fix the bug.
2014-12-08 15:47:49 +09:00
86647d8387
[DISCO_F4xx] add PeripheralPins.c/.h
2014-12-07 22:25:38 +01:00
e2a8d32343
Add definition of User button(SW0 and SW1)
...
Add definition of User button for users.
2014-12-05 17:37:53 +09:00
4473a517a8
Fix some bugs that IRQ Edge Interrupt will not operation normal.
...
The bugs of IRQ Edge Interrupt as below.
- Not call a function that was registered in rise, always call a function that was registered in the fall.
- If there are multiple interrupt sources, there is a possibility that end the wrong interrupt processing.
2014-12-05 17:36:52 +09:00
a36c4462f2
Fix a bug that initialize setting of SPI clock value is not correct.
...
Modify the value as below.
uint16_t mask = 0x000c0; ->
uint16_t mask = 0x000c;
2014-12-05 17:35:49 +09:00
dca273e167
Fix a bug that I2C driver can not transfer of 1Byte/2Byte.
...
I2C driver was not considered about 1Byte/2Byte transfer.
Add 1Byte/2Byte transfer processing in I2C driver.
2014-12-05 17:31:22 +09:00
fe61d8c4f7
Fix a fear of bug that a static value will be indefiniteness.
...
There was a function that has the potential to be called with indefiniteness argument.
Modify to not call the function with indefiniteness argument.
2014-12-04 16:03:50 +09:00
7ea2016953
Fix a bug that I2C freq become fixed 100kHz
...
When I2C read/write, I2C freq ignores the setting of user and it become fixed 100kHz.
Implement change the freq according to the setting of user.
2014-12-04 15:40:38 +09:00
2b4edd572b
[NUCLEO_F091RC] Remove call to systick
2014-12-03 15:13:05 +01:00
7761378c39
[NUCLEO_F072RB] Remove call to systick
2014-12-03 15:11:58 +01:00
600af8d001
[LPC11XX_11CXX] Fix SPI slave issue
...
- Fix a bug reported here:
https://developer.mbed.org/questions/4872/SPISlave-Class-dosnt-work-on-LPC1114/
- Add IOCON settings to enable proper pin functions
- Remove non-busy check in slave_receive() function, since the SSP/SPI
is always in busy state when received a valid data according to the
device user manual
- Add bit mask in spi_slave_read() function
- Add TARGET_LPC1114 pin config in SPI_SLAVE test
- Tested with LPC11U24 SPI master and LPC1114 SPI slave
2014-12-03 14:49:23 +09:00
a88eaace6b
Merge pull request #753 from dinau/update_disco_f051r8
...
Targets: DISCO_F051R8 - Updated driver files with HAL driver.
2014-12-02 15:36:15 +00:00
f6743c5b50
Merge pull request #751 from bcostm/master
...
Targets: NUCLEO_F303RE - Add new target
2014-12-02 15:35:46 +00:00
990fc973b5
[DISCO_F051R8]Updated driver files with HAL driver.
2014-12-02 23:41:28 +09:00
c1caff2714
[NUCLEO_F303RE] Add target part 2 - hal
2014-12-02 07:50:07 +01:00
27a9f11f8e
Implement peripheral clock determination process to I2C driver
...
When making I2C communication freq, we used a fix value 33.3MHz as peripheral clock as below.
pclk = 33333333 / (2 << count);
But it is not dynamic when system clock is changed.
So, implement peripheral clock determination process.
Peripheral clock will be decided by RZ-A1H system clock mode.
2014-12-01 20:09:11 +09:00
7290768dc6
Fix a unreadable comments.
...
There were some Japanese comments in I2C source code.
Fixed those comments to be readable.
2014-11-28 16:18:40 +09:00
1c4831a243
Fixed I2C bug
...
Modified the register settings of communication frequency .
2014-11-28 10:28:45 +09:00
cf9fc3c4ac
Add SD function
...
Add SD function and tests for RZ_A1H.
2014-11-27 17:12:57 +09:00
d9a231862a
Merge pull request #733 from masaohamanaka/master
...
Targets: RZ_A1H - Modified Terminal setting for New GR-PEACH.
2014-11-26 08:53:06 +01:00
0d99a7d7ad
Delete old version terminal setting code.
...
We confirmed that user never use the old version GR-PEACH.
So, we deleted old version terminal setting code.
2014-11-26 13:44:01 +09:00
4e89d3c771
Merge pull request #739 from xiongyihui/master
...
Targets: ARCH_MAX & DISCO_F407VG - Add SystemCoreClockUpdate and HAL_Init to mbed_sdk_init
2014-11-25 12:30:32 +01:00
9bf1247ff9
[ARCH_MAX & DISCO_F407VG] add SystemCoreClockUpdate and HAL_Init to
...
mbed_sdk_init
HAL_Init is needed by Arch MAX to setup RTC with internal clock
2014-11-25 16:48:14 +08:00
8c56483c43
[mbed][MTS_DRAGONFLY_F411RE] fix D2 pin mapping, remove PWM_OUT from PinNames.h
2014-11-24 11:30:37 -06:00
ea50eb3512
[NUCLEO_L053R8] Correct issue with Travis build
2014-11-24 16:20:26 +01:00
53f92133dc
[NUCLEO_L0/L1] Add PeripheralPins files
2014-11-24 12:36:39 +01:00
afd167f734
[NUCLEO_F4] Add note on optional pins
2014-11-24 12:35:46 +01:00
04dc0c7a24
[NUCLEO_F3] Add PeripheralPins files
2014-11-24 12:34:35 +01:00
f62073e179
[NUCLEO_F103RB] Add PeripheralPins files
2014-11-24 12:33:15 +01:00
60e0d1431e
[NUCLEO_F0] Add PeripheralPins files
2014-11-24 12:32:02 +01:00
814740f86e
Merge pull request #720 from bcostm/master
...
Targets: NUCLEOs - Improvement of gpio_irq hal
2014-11-24 08:15:36 +01:00
59f686bbc1
Modified Terminal setting for New GR-PEACH.
...
Modified Terminal setting of Ethernet and LED PIN for New GR-PEACH.
2014-11-21 13:47:46 +09:00
365df95cf6
[mbed][MTS_DRAGONFLY_F411RE] fix pin names for spi to external flash
2014-11-20 14:43:10 -06:00
bb4c5f4ab5
[mbed][MTS_DRAGONFLY_F411RE] remove unnecessary VIMPINNAMES file
2014-11-20 11:06:20 -06:00
ac11414116
[mbed][MTS_DRAGONFLY_F411RE] add RADIO_TX/RX pins, correct reversed TX/RX pins for uart6
2014-11-20 09:57:13 -06:00
ffab541ac9
[mbed][MTS_DRAGONFLY_F411RE] clean up PinNames.h
2014-11-20 07:52:48 -06:00
451914a276
[mbed][MTS_DRAGONFLY_F411RE] fix stdio uart decl, fix D3 pin decl, change blinky test main.cpp back to original
2014-11-20 07:43:42 -06:00
3e1aac36e1
Correct pin names for serial rx/tx
2014-11-19 14:52:49 -06:00
f364b76d2f
Merge pull request #703 from masaohamanaka/master
...
Targets: RZ_A1H - Fixed a bug of serial interrupt
2014-11-19 00:59:43 -08:00
5ad32eaa60
Merge pull request #715 from kshoji/nRF51822_serial_31250
...
Targets: nRF51822 - Add support for Serial 31250 baud (for legacy MIDI)
2014-11-19 00:26:52 -08:00
d05c1d4950
nrf51_bitfields.h reverted.
2014-11-19 14:47:01 +09:00
20177c912b
[NUCLEOs] Improvement of gpio_irq hal
...
Now it is possible to have multiple interrupt pins on EXTI vectors.
Example:
EXTI0 -> PA_0 or PB_0 or PC_0, ... only 1 pin
EXTI5_9 -> PA_5 and PA_6 and PB_7 and PC_8 and PC_9: up to 5 pins
EXTI10_15: PA_10 and PB_11 and PB_12, ... : up to 6 pins
2014-11-18 12:28:30 +01:00
34eccbf435
Merge pull request #716 from bcostm/master
...
Targets: NUCLEO_F4xx - Add PeripheralPins.c/h file
2014-11-18 02:15:57 -08:00
a210914f42
Fixed some function's bugs
...
Fixed some bugs and modified mmu setting.
Fixed functions as below
- analog in
- i2c
- interruptin
2014-11-18 13:54:39 +09:00
ff85a88b7b
[NUCLEO_F4] Add PeripheralPins.c/h file
...
Move all pinouts into these 2 files.
2014-11-17 10:01:44 +01:00
3dcb6a5b25
nRF51822 - Add support for Serial 31250 baud (for Legacy MIDI)
2014-11-17 12:56:40 +09:00
2e18da7419
[mbed][MTS_DRAGONFLY_F411RE] added platform support files and dirs built gcc executable NOT working
2014-11-14 11:29:46 -06:00
570c25d255
Merge pull request #705 from 0xc0170/fix_issue#704
...
Targets: K64F - UART_NUM fix in a condition
2014-11-14 07:46:28 -08:00
81254a0e44
K64F - UART_NUM fix in a condition
2014-11-14 15:21:39 +00:00
cde105eaa5
Fixed a bug of serial interrupt
...
I fixed a bug of serial interrupt as below.
Serial TX/RX interrupt was not occur when TX/RX end.
2014-11-14 21:20:46 +09:00
ac6b5cb06b
[NUCLEO_F0] Align hal files
2014-11-14 11:01:47 +01:00
23761ee73e
[NUCLEO_F3] Align hal files
2014-11-14 11:00:10 +01:00
c05cb2e726
[NUCLEO_F4] Align hal files
2014-11-14 10:58:57 +01:00
67346ec8d6
Merge branch 'reorder_f3xx_2' of github.com:ohagendorf/mbed into ohagendorf-reorder_f3xx_2
...
Conflicts:
workspace_tools/export/coide.py
2014-11-14 08:56:20 +00:00
dffeedc96e
Merge pull request #695 from autopulated/testsforall
...
Targets: add USBTX and USBRX pin definitions for targets that don't provide them
2014-11-14 00:48:06 -08:00
6d1da4ef47
[NUCLEO_L053R8] Typo corrections (astyle)
2014-11-13 16:46:25 +01:00
df479e409a
[NUCLEO_F411RE] Typo corrections (astyle)
2014-11-13 16:45:36 +01:00
40f3f7e27c
[NUCLEO_F401RE] Typo corrections (astyle)
2014-11-13 16:44:50 +01:00
307f641d14
[NUCLEO_F334R8] Typo corrections (astyle)
2014-11-13 16:44:05 +01:00
2fb9552913
[NUCLEO_F302R8] Typo corrections (astyle)
2014-11-13 16:43:09 +01:00
285977d068
[NUCLEO_F103RB] Typo corrections (astyle)
2014-11-13 16:42:32 +01:00
9d02d52994
[NUCLEO_F072RB] Typo corrections (astyle)
2014-11-13 16:41:28 +01:00
17e61f58d6
[NUCLEO_F030R8] Typo corrections (astyle)
2014-11-13 16:40:37 +01:00
fa2e957179
also add USBTX=USBRX=NC definitions for LPC13XX
2014-11-13 14:13:42 +00:00
69cd573545
add USBTX and USBRX pin definitions for targets that don't provide them (so that tests compile), but set to NC
2014-11-13 11:24:36 +00:00
08c85ef136
Merge pull request #680 from mbrudevoldlpd/master
...
Platform: Add support for MultiTech mDot module
2014-11-13 08:21:18 +00:00
ae8d818927
Rename mDot to mDot F405RG to allow for variation in processor
2014-11-12 16:21:13 -06:00
dcaa34a9d6
Fix whitespace per coding standard
2014-11-12 10:16:29 -06:00
6737282994
Merge pull request #679 from toyowata/master
...
Targets: LPC11U68 - Fix GPIO init for specific pins
2014-11-12 09:13:13 +00:00
6fd59778d6
Merge pull request #684 from Sissors/ksdk
...
Targets: KSDK - Fix ACK/NACK received inverted (issue #661 )
2014-11-12 08:45:48 +00:00
d3e2cacff3
[HAL][KSDK] Fixed ACK/NACK received inverted ( https://github.com/mbedmicro/mbed/issues/661 )
...
As reported by Geremia G
(http://developer.mbed.org/forum/bugs-suggestions/topic/5220/ )
2014-11-11 20:32:07 +01:00
c9ec513887
Merge pull request #677 from Sissors/ksdk
...
Targets: Freescale KSDK - Fix first serial char not being sent
2014-11-11 09:38:07 +00:00
5d6ee64bf1
Support for MTS MDOT
2014-11-10 16:15:53 -06:00
8adfd82aa1
Merge pull request #673 from Wind0r/fix_lpc1768_repeatmode
...
Targets: LPC176X - Add repeater pinmode
2014-11-10 07:40:15 +00:00
59fa5437e3
Merge pull request #663 from bikeNomad/master
...
Ensure that IG (Global) bit is reset in MAC address for K64F and others
2014-11-10 07:37:52 +00:00
e24f5b642b
Merge pull request #662 from xiongyihui/nrf51822
...
Targets: NRF51822 - enable I/O mapping and peripheral dynamic assignment for I2C and SPI
2014-11-10 07:36:19 +00:00
b0a7a246c1
[LPC11U68] Fix GPIO init for specific pins
...
* Add GPIO initialization value for P0_12, P0_13 and P0_14 since default
mode for them are other than GPIO
* This issue reported here:
https://developer.mbed.org/questions/4874/Using-SPI-on-LPCXpresso11U68/
2014-11-10 14:01:59 +09:00
20212b8c6b
[TARGET_DISCO_F303] reorder structure - part 3
...
Update of mbed hal.
2014-11-10 00:12:40 +01:00
57a79c08a9
[HAL][KSDK] Fix first serial char not being sent
...
The K64F/K22F didn't send the first char. I don't know why exactly, but
any type of reading a status register seems to fix it. And this extra
line at least makes sense. Now it works correctly.
2014-11-09 19:40:29 +01:00
de1bb3af3a
Add repeater pinmode
2014-11-08 12:07:39 +01:00
d00caad8c9
[HAL][NRF51822] enable I/O mapping and peripheral dynamic assignment for I2C and SPI
2014-11-07 19:24:34 +08:00
eec0be05cd
Merge pull request #660 from bcostm/master
...
Targets: STM32F0 - Factorisation of NUCLEO_F030R8/F072RB/F091RC cmsis folders
2014-11-07 08:13:40 +00:00
3e4e9ade0d
remove useless assert line
2014-11-07 09:42:35 +08:00
e6ae0a7e02
Ensure that IG (Global) bit is reset in MAC address for K64F and others
...
See IEE 802.3-2002, Section 3.2.3(b)
2014-11-06 09:48:32 -08:00
8724eb616b
Merge pull request #594 from tkuro-rel/master
...
[RZ/A1H] mbed-RZ first release
2014-11-06 10:54:58 +00:00
e449648cbc
[NUCLEO_F072RB] Update gpio/port structures
...
Needed due to the new STM32Cube version used.
2014-11-06 10:26:20 +01:00
33a843cf93
Merge remote-tracking branch 'upstream/master'
...
Conflicts:
workspace_tools/targets.py
2014-11-06 16:19:35 +09:00
e0c00cc4ee
[WALLBOT_BLE] Add new platform
...
* Add new platform Wallbot BLE
* Identical as nRF51822 target, but different pinout
2014-11-06 16:03:43 +09:00
79a3fdb1e2
[LPC824] Fix serial interrupt issues
...
Basically, this is same fix as
https://github.com/mbedmicro/mbed/pull/633
* Fix issue by handling interrupt type (TxIrq and RxIrq)
* ISR now correctly refers INTSTAT instead of STAT to get interrupt
cause
* Disable interrupt when updating vector table
* Tested by issue #616 test cases and serial_interrupt test
2014-11-05 22:35:35 +09:00
d61817a4c8
[TARGET_DISCO_F303] reorder structure - part2
...
Update of mbed hal.
2014-11-05 01:11:22 +01:00
340effa2c7
[NUCLEO_L053R8] Update GPIO structures
...
Due to latest registers map file used.
2014-11-04 11:16:17 +01:00
835736bd23
Merge pull request #637 from rgrover/master
...
Target: NUCLEO_F103RB - removing some un-used variables
2014-11-03 02:54:33 -08:00
02478cd1f2
Merge pull request #633 from toyowata/master
...
Target: LPC1549 - Fix serial interrupt issues (issue report #616 )
2014-11-03 02:21:15 -08:00
fd3b27b327
white space diffs.
2014-11-03 08:56:31 +00:00
fa0a82d695
remove un-unsed variables.
...
Getting rid of some compiler warnings.
2014-11-03 08:53:16 +00:00
ad4a0ea53a
[LPC1549] Fix serial interrupt issues
...
* Fix USART2 base address offset
* Fix issue by handling interrupt type (TxIqr and RxIrq)
* ISR now correctly refers INTSTAT instead of STAT to get interrupt
cause
* Disable interupt when update vector table
* Tested by issue #616 test cases and serial_interrupt test
2014-11-02 14:10:43 +09:00
86c54a26af
[DISCO_F334C8] new target incl. rtos support
...
New target as a copy of nucleo_f334 with changes/additions in pin and
rtos definitions.
2014-10-31 18:14:23 +01:00
9a8a75e827
Add Ethernet functionality
...
Although the Ethernet functionality is not for review.
2014-10-31 17:01:59 +09:00
1d489bc298
Added support for the STM32L0 Discovery board
2014-10-30 21:11:36 +00:00
9586b1b00a
Merge pull request #618 from bcostm/master
...
Targets: NUCLEO_F334R8 - Update STM32Cube driver
2014-10-30 02:08:26 -07:00
d48844320b
[NUCLEO_F334R8] Update STM32Cube driver
...
- Same version as in NUCLEO_F302R8
- Fix issue #482 (IAR compilation)
- Compliant with mbed RTOS (Systick no more used)
2014-10-29 16:16:55 +01:00
fcd3ac25dc
Fixed the nRF51-Dongle support
2014-10-29 11:07:04 +02:00
b8809b3e14
Merge remote-tracking branch 'upstream/master'
2014-10-29 13:24:46 +09:00
e2dedfde94
Merge pull request #605 from Cheong2K/master
...
HAL: RBLAB_BLENANO - Fix PinNames.h for the BLE Nano board.
2014-10-27 01:00:01 -07:00
f37b32e66c
Merge pull request #600 from rgrover/master
...
HAL: NRF51822_DONGLE - PinNames and device header files
2014-10-27 00:55:45 -07:00
a84b2c75a6
Fixed PinNames.h for the BLE Nano board.
2014-10-27 13:58:24 +08:00
f39ea2e5cd
[LPC824] I2C ROMAPI/bitrate related fix
...
- I2C did not work as ROMAPI initialization override CFG register settings at i2c_init()
- i2c_frequency() ignored bitrate settings
2014-10-26 17:38:14 +09:00
f039906de8
renaming the target to NRF51822_DONGLE
2014-10-24 17:16:45 +01:00
d136331597
preparing for the USB DONGLE platform from Nordic
2014-10-24 15:56:09 +01:00
c48829330c
HAL [LPC824] Fix multi channel I2C issue
...
- Update resource count value which did not count up during multiple
channel I2C resources are used
2014-10-24 17:47:00 +09:00
9ddce12aa6
[RZ/A1H] commit for HAL changes
...
- adds GPIO driver
- adds I2C driver
- adds SPI driver
- adds PWM driver
- adds serial driver (irq not supported)
- adds ticker driver
- add analogin driver
2014-10-24 11:46:01 +09:00
ba7a631c3d
Merge branch 'master' into dev-freescale-kl43z
2014-10-21 23:14:39 +02:00
de35d0c84e
fix for the case where there are multiple tickers firing at nearly the same time
2014-10-20 09:49:28 +01:00
53ec8ba932
Merge pull request #582 from ohagendorf/disco_f429zi
...
CMSIS/HAL: DISCO_F429ZI - correction of RAM memory layout in the linker script and stdio_uart config
2014-10-20 09:00:25 +01:00
254e57d4b2
[DISCO_F429ZI] fix of RAM memory layout and stdio_uart
...
All test without any peripherals ("peripherals": []) are OK with these
two corrections.
- RAM start address was wrong - overlap with interrupt vector table
- wrong uart for stdio uart
2014-10-20 01:36:45 +02:00
9155d4204b
[SSCI824] Add platform
2014-10-19 22:49:16 +09:00
185ce5bfe4
Fixed LPUART and USB device initialization issue. Added _kill, _exit and _getpid functions required by gcc-arm-none-eabi-4.8 toolchain.
2014-10-17 22:20:12 +02:00
74cc430faa
Merge pull request #574 from rgrover/master
...
updating to v7.1.0 of the Nordic soft-device.
2014-10-17 14:03:14 +01:00
53e1cdc34d
Merge pull request #575 from toyowata/master
...
HAL : LPC824 - Fix SPI1 SWM table
2014-10-17 14:45:44 +02:00
03482e329d
HAL : [LPC824] Fix SPI1 SWM table
...
- Fix SPI ch1 switch matrix table value - detected by SPI_MASTER test
case
- Add LPC824 pinout for some test cases
- [LPC824] spi_api.c code refactoring
2014-10-17 19:16:37 +09:00
1993a8d343
mostly white space diffs; and line endings
2014-10-17 11:13:36 +01:00
0c651617eb
Add v7.1.0 of the Nordic softdevice.
...
This is necessary in order to utilize the additional 16KB of SRAM in the updated nRF51822.
2014-10-17 10:55:12 +01:00
028bbfafbc
[NUCLEO_F091RC] Minor change in pin definition
...
There is no PWM on PB_3 for this device.
2014-10-17 09:27:58 +02:00
36a8882a54
Merge pull request #566 from bcostm/master
...
Targets: NUCLEO_L152RE - Migration to STM32Cube driver (CMSIS and HAL)
2014-10-16 15:47:15 +02:00
4e1bd0b388
STDIO_UART_xx in peripheralnames.h
2014-10-16 09:12:20 +02:00
d5d23b1703
HAL: STM32F407VG - removal of nucleo folder caused by commit 8df74cfcda
2014-10-16 08:57:14 +02:00
aa43cb95b8
[NUCLEO_L152RE] Migration to STM32Cube driver
2014-10-16 08:48:34 +02:00
Masao Hamanaka
Marcomissyou
Martin Kojtal
bcostm
Wim
milangit
Willem23
nitin.bhaskar.27.09@gmail.com
Anders Lindvall
ytsuboi
Paul Staron
Rohit Grover
ohagendorf
kazu-zamasu
Toyomasa Watarai
Przemek Wirkus
Martin Olejar
Yihui Xiong
Mike Fiore
vincent rabbit
Richard Osterloh
sg-
Nick DeLisi
Sissors
Michael Brudevold
dinau
kshoji
James Crosby
Wind0r
Ned Konz
Bogdan Marinescu
Takayuki Kurosawa
Mihail Stoyanov
Cheong2K
K4zuki