-Added the mbedtls,crypto,psa,filesystem,fat,littlefs in baremetal.json to resolve compiler issue
-Disable metrics that are not available for bare metal
-Moved the baremetal.json inside TESTS/configs directory
-Added the baremetal.json on Tests directory to enable bare-metal
-Conditional enable of greentea metrics
Note:
Run green tea with bare metal
mbed test -m target -t GCC_ARM -n tests-mbed_platform-transaction --app-config TESTS/baremetal.json
Extend the deepsleep wait up to 220% of the Watchdog timeout.
One of the current Watchdog timing requirements is to fire BEFORE twice
the timeout value, but at least one target (K64F) is expected to fire
EXACTLY at a doubled timeout value in deepsleep mode. This patch updates
the test to cope with a new deepsleep timing requirement.
Protocols like mdns requires IPv6 link local address to be advertised in its
records (AAAA record). LWIP::Interface::bringup() API is creating IPv6 link
local address;But as of now there is no API exposed by mbed-os to get the
IPv6 link local address.
This new API is required to deliver mDNS library support on mbed-os for Cypress
platforms. Unit tested it by invoking get_ipv6_link_local_address with a simple
application.
Looks like the PWM works fine on NRF52840_DK target, but this target has hardware limitation and the max PWM period is 32 767 us.
That is why test cases when the period is set 50 ms are failing.
The test will be modified to test the 30 ms period instead of 50 ms, so the test can pass on all CI targets.
Add a watchdog-kicking thread running in the background when the test
suite is handling a failed assertion. A single watchdog kick did not
provide enough time for the greentea communication if the watchdog
reset happened later than expected.
Use a BaseHostTestAbstract.reset() method instead of
BaseHostTestAbstract.reset_dut() for more consistent behavior with
various platforms in the CI.
In contrast to a local setup, the reset_dut() method flashes the binary
again after performing the reset in a remote setup (RaaS). This was not
intentional in reset_reason tests. Moreover, this led to a different
behavior (a different reset_reason) for different flashing methods which
are target specific.
The two character sequence %% is used in standard implementations of
printf to print a single %. This is because % is essentially printf's
escape character for format specifiers and as \% cannot work printf
uses %%.
Therefore to be compatible with string buffers containing
%%, minimal-printf also needs to only print a single %.
Notes:
- CRC and TRNG are disabled on this board since the MCU on this board does not have the required hardware.
- QSPI and QSPIF are temporarily removed due to issues related to supporting the new S25FS512S flash chip we have on this board. These will be enabled as soon as we can get the issues resolved.
https://github.com/ARMmbed/mbed-os/issues/11722
This fixes the stack overflow error during the basic USB tests.
Update the ctrl_buf member of the USBTester and USBEndpointTester test
classes to be allocated on the heap. This saves 2 KB of a main stack.
The test floods the device with UDP requests (it skips the 100 ms delay to simulate instant timeout). ESP8266 starts responding with "busy p..." message. It needs more time to process the data and recover for subsequent tests.
The QSPI spec allows alt to be any size that is a multiple of the
number of data lines. For example, Micron's N25Q128A uses only a
single alt cycle for all read modes (1, 2, or 4 bits depending on
how many data lines are in use).
- set certs and keys after socket open() as required by offloaded TLSSocket
- Added more checks for invalid handshake test and removed google.com test as
as some modems (e.g. BG96) might contains root CA for google.com
`ESP8266Interface::connect()` and `ESP8266Interface::disconnect()` can be used in terms of asynchronous operations. Mainly, it is based on newly added private variable of type `esp_connection_software_status` which is used to keep tracking of state of connection.`wifi_connect_nonblock` test was renamed and amended to test both `connect()` and `disconnect()` operation
Change stack sizes in test stats_cpu and mbedmicro-rtos-mbed-threads.
The value 384 was declared to make this test pass on STM32F070RB,
but its main stack value has been changed to 3KB so now it passes
this test with 512 stack size. The change was needed to make GR_LYCHEE
pass this test on ARM compiler.
IPCore's netsocket tests are expected to run all tests even if some of them fail. The TEST_ASSERT_INT_WITHIN macro sets a global variable Unity.CurrentTestFailed which prevents further checks and gives incorrect failure count. Other assertion macros in Unity do not do that.
The most suitable place to free up I2C pins is in i2c_free(). Due to
i2c_free() not available in I2C HAL, we free up I2C pins manually by
configuring them back to GPIO.
Without free-up of I2C pins, SDA/SCL pins of the same I2C peripheral may
share by multiple ports due to 'all ports' tests here, and the following I2C
tests would be subject to interference by shared ports.
The Nuvoton targets listed below don't support input pull-up/pull-down mode
and so are skipped for test:
- NUMAKER_PFM_NANO130
- NUMAKER_PFM_NUC472
- NUMAKER_PFM_M453
Calls to Timer::attach() are inlined in order not to use floating-point
library functions calls given Timer::attach_us() expects an integer
for the callback interval.
* Create new `s_timestamp_t` type to specify timestamp is seconds
* Alter `attach()` API to expect `s_timestamp_t` for interval value
* Create helper macro to convert seconds to milliseconds and help code
readability
* Modify Greentea tests accordingly
Test case printed IP address. If ip address is null, IAR compiled binary fails.
Added check for printing null. If IP address is null, then it prints string 'null'.
Test case printed IP address. If ip address is null, IAR compiled binary fails.
Added check for printing null. If IP address is null, then it prints string 'null'.
* Fix rtos include path in NRFCordioHCIDriver
* Flatten USB driver directory structure
* Add missing include for us_ticker
* Add more missing includes for us_ticker
* Fix mbed_hal_fpga_ci_test_shield/uart test
* Fix bare-metal build
* Fix Watchdog UNITTEST
* Fix Mbed OS 2 build for Public/Internal headers relocating
The contents of the usb directory were moved to appropriate locations and the usb directory removed.
* Public USB headers moved under drivers/
* Internal USB headers moved under drivers/internal/
* USB Source code moved under drivers/source/usb/
* Moved usb/device/hal/ under hal/usb/
* Moved usb/device/USBPhy/ under hal/usb/
* Merged usb/device/targets/ into targets/
* Separated public and private USB API documentation under Doxygen groups drivers-public-api and drivers-internal-api.
* Fixed wrapper functions for IAR
* Fixed and renamed profile to minimal-printf.json
* Moved minimal-printf under platform
* Removed minimal-printf/mbed_lib.json
* Modified exporter template to work with partial profile
* Prevented optimization of printf to avoid compiler function substitution
- Add the no confidentiality & no replay protection flags
- Add actual size parameter in PS/ITS get APIs
- Change a few size parameters from uint32_t to size_t
During the SiP workshop, we discovered that 3% is too narrow due to a combination of:
Voltage rail differences between target and FPGA
Extension of lesser-resolution ADC's to 16-bit results
The test case which checks full range cannot be executed at the moment due to a hardware bug in FPGA-Test-Shield.
This test case will be restored when the final version of FPGA-Test-Shield is ready.
Watchdog::stop() is called in this test. If the target does not support
stopping the watchdog this case needs to be skipped.
Also improve handling ignored test cases.
Update the watchdog timing requirements:
1. The watchdog should trigger at, or after the timeout value.
2. The watchdog should trigger before twice the timeout value.
Use a SERIAL_FLUSH_TIME_MS value consistent with other tests.
Update the watchdog timing requirements:
1. The watchdog should trigger at, or after the timeout value.
2. The watchdog should trigger before twice the timeout value.
Update the watchdog timing requirements:
1. The watchdog should trigger at, or after the timeout value.
2. The watchdog should trigger before twice the timeout value.
Remove explicit calls to sleep.
Update the watchdog timing requirements:
1. The watchdog should trigger at, or after the timeout value.
2. The watchdog should trigger before twice the timeout value.
Update the watchdog timing requirements:
1. The watchdog should trigger at, or after the timeout value.
2. The watchdog should trigger before twice the timeout value.
With the DEEP_SLEEP_TEST_CHECK_WAIT_DELTA_US increased,
we now have TEST_ASSERT_UINT64_WITHIN(delta=1000, expected=1000, actual=1000)
so this assertion needed to be updated.
What we need is the deep sleep to be enabled after the programed interrupt
has fired and before a 2ms timeout expiration, which means >= 1000 and < 2000.
Running PowerShell script on some windows machines is blocked.
To avoid this problem script was replace by the code run directly in PowerShell console.
Changes:
- restore the original form of setup/teardown handlers,
- test_lock_unlock_test_check(): do not use common ticker layer (Timer, Timeout). Use only ticker HAL layer.
- Increase DEEP_SLEEP_TEST_CHECK_WAIT_DELTA_US delta.
Added a mechanism which will prevent an initialised watchdog from
resetting the device during final greentea communication.
This allows testing watchdog timeouts as short as 50 ms.
As the timer code became more generic, coping with initialization on
demand, and variable width and speed us_ticker_api implementations,
wait_us has gradually gotten slower and slower.
Some platforms have reportedly seen overhead of wait_us() increase from
10µs to 30µs. These changes should fully reverse that drop, and even
make it better than ever.
Add fast paths for platforms that provide compile-time information about
us_ticker. Speed and code size is improved further if:
* Timer has >= 2^32 microsecond range, or better still is 32-bit 1MHz.
* Platform implements us_ticker_read() as a macro
* Timer is initialised at boot, rather than first use
The latter initialisation option is the default for STM, as this has
always been the case.
Update the watchdog timing requirements:
1. The watchdog should trigger at, or after the timeout value.
2. The watchdog should trigger before twice the timeout value.
In particular and as kindly suggested by Przemec S. :
1. Add setup/teardown handler’s for all cases. This disables sys-tick,
so there should be no unexpected lp ticker interrupt scheduling.
2. Modify setup/teardown handler’s: remove suspension of lp/us tickers,
so they can count as this is required by test_lock_unlock_test_check test
case.
3. Use TEST_ASSERT_TRUE(sleep_manager_can_deep_sleep_test_check()) after
setting interrupt to cope with STM specific handling (CMPOK interrupt with
deep-sleep locked). This performs wait only if needed and will not affect
other targets which do not need extra wait.
4. Move sleep_manager_lock_deep_sleep() after TEST_ASSERT_TRUE(sleep_manager_can_deep_sleep_test_check())
5. Use TEST_ASSERT_TRUE(sleep_manager_can_deep_sleep_test_check()) in
test_lock_unlock_test_check to let lower layers manage deep sleep.
Time drifting test cases use serial communication with the host and are unstable on CI.
Skip time-drifting test cases if SKIP_TIME_DRIFT_TESTS macro is defined.
The idea for the future is to use FPGA test shield for timing tests instead of host scripts.
Also remove `__ARM_FM` macro which in most cases was used to disable time drifting tests. In other cases replace `__ARM_FM` with `TARGET_ARM_FM` which is more suitable.
Fix was to add some time between iterations connect-disconnect.
In cellular disconnect, cellular network may send disconnect events
and if those events come when connect is already ongoing test will fail.
So wait a bit after disconnect so that disconnect events should be over.
The Watchdog driver has been updated making these tests incompatible
with the new API. The Watchdog driver functionality is tested with the
unit tests located in UNITTESTS/drivers/Watchdog/ .
Do not call sleep from the test thread, but let scheduler do it.
And also include the deep sleep latency in the computation of the allowed
delta for deep sleep test case.
On some targets like STM family boards with LPTIM enabled an interrupt is triggered on counter rollover.
We need special handling for cases when next_match_timestamp < start_timestamp (interrupt is to be fired after rollover).
In such case after first wake-up we need to reset interrupt and go back to sleep waiting for the valid one.
On some targets like STM family boards with LPTIM enabled there is a required delay (~100 us) before we are able to reprogram LPTIM_COMPARE register back to back.
This is handled by the low level lp ticker wrapper which uses LPTIM_CMPOK interrupt. CMPOK fires when LPTIM_COMPARE register can be safely reprogrammed again.
This means that on these platforms we have additional interrupt (CMPOK) fired always ~100 us after programming lp ticker.
Since this interrupt wake-ups the board from the sleep we need to go to sleep after CMPOK is handled.
Background:
There is an errata in LPTIM specification that explains that CMP Flag
condition is not an exact match (COUNTER = MATCH) but rather a
comparison (COUNTER >= MATCH).
As a consequence the interrupt is firing early than expected when
programing a timestamp after the 0xFFFF wrap-around.
In order to
work-around this issue, we implement the below work-around.
In case timestamp is after the work-around, let's decide to program the
CMP value to 0xFFFF, which is the wrap-around value. There would anyway be
a wake-up at the time of wrap-around to let the OS update the system time.
When the wrap-around interrupt happen, OS will check the current time and
program again the timestamp to the proper value.
Deprecate wait() in favour of acquire(), try_acquire(),
try_acquire_for() and try_acquire_until().
Brings Semaphore more into line with CMSIS-RTOS 2 (which uses "acquire"),
itself (as it has "release"), and other classes having "try", "try for"
and "try until".
Also steps away from vague "wait" term - the primary operation here is
to acquire the semaphore, and this will of course sleep.
* capitalize driver class name,
* reword test docs for the driver & HAL,
* capitalize Mbed name,
* reword the comments explaining the SERIAL_FLUSH_TIME_MS macro.
Change the config parameter used as a delay before sending the sync
packet after the device reset in watchdog and reset_reason tests. Use
'forced_reset_timeout' instead of 'program_cycle_s'.
The latest rebase of the watchdog feature branch introduced errors in compiling
watchdog tests due to missing headers.
- Watchdog HAL API test
Include missing header files to main.cpp (mbed_wait_api.h, stdlib.h).
- Watchdog HAL API timing test
Include missing header files to main.cpp (us_ticker_api.h).
- Watchdog Driver API test
Include missing header files to main.cpp (mbed_wait_api.h, stdlib.h).
Inject mbed namespace into main.cpp to fix Watchdog name resolution.
On NUMAKER_PFM_NANO130 target, WDT's clock source is fixed to LIRC, which is much
less accurate than other targets. Enlarge delta define to pass this test.
due to partial implementation. Having FUTURE_SEQUANA_M0 and
FUTURE_SEQUANA PSA targets is misleading.
Signed-off-by: Devaraj Ranganna <devaraj.ranganna@arm.com>
Reason for needing greater timeout could be this test's performance.
UDPSOCKET_ECHOTEST_BURST_NONBLOCK is implementing the receiving
differently and is passing with 1 second timeout.
Get rid of a volatile, and use atomics to synchronise with the interrupt
routine instead.
Useful as a non-RTOS basic compilation check for the atomics - the
fuller atomic test relies on the RTOS.
These are platform tests, but rely on the RTOS to run multiple threads
to exercise it.
(The atomics are still useful in non-RTOS, to protect against interrupt
handlers, but testing versus other threads is easier. The implementation
is the same either way, so doesn't seem worth testing non-RTOS
specifically).
The loop was wrongly incrementing the index of the array after assiging
the value. Thus the first array element was used twice and the last one
was never user. The issue is fixed and the loops are refactored and
simplified to avoid such confusion in the future.
This test case uses `hidapi` -- a cross-platform Python module.
To keep the initial Mbed setup as simple as possible, the `hidapi`
module is skipped on Linux hosts because of its external dependancies
for this platform.
The module can be easily installed following instructions from the
README file.
The test case is skipped if the host machine lacks `hidapi` module.
Wait for the host driver to finish setup before sending any HID reports
from the device.
USBHID::wait_ready() blocks until the device reaches 'configured' state,
but the state of the host HID driver remains unknown to the device.
To successfully use pyusb on Windows hosts, a Zadig configuration has to
be performed. Since config for basic tests has already been provided,
use it again.
FastModels are a software simulator for Arm platform/cores.
They mean to be used as a tool for testing or early prototype stage development.
Due to the nature of software simulator can't grantee the timing accuracy like HW.
So time drifting test is skipped for software models.
Reason for needing greater timeout could be this test's performance.
UDPSOCKET_ECHOTEST_BURST_NONBLOCK is implementing the receiving
differently and is passing with 1 second timeout.
Added WiFi_Bt CM4 PSA target in mbedos json
Added SPE-NSPE mailbox initialization for CM4 SystemInit
Made similar to FUTURE_SEQUANA configurations
Copied FUTURE_SEQUANA CM0 SPM part for WiFi_Bt smoke test
Added CY8CKIT_062_WIFI_BT_M0 and CY8CKIT_062_WIFI_BT_M0_PSA targets
Sorted files for new CY8CKIT_062_WIFI_BT_M0 and CY8CKIT_062_WIFI_BT_M0_PSA targets
Copied files for CY8CKIT_062_WIFI_BT_M0_PSA from FUTURE_SEQUANA
Copied and updated cm0p start files
Corrected according to FUTURE_SEQUANA
Changes to M0 startup files to have SPM started
Fixed implicit declaration warning
Commented interrupts enabling according to FUTURE_SEQUANA flow
Updated prebuild spm_smore CM0 hex for CM4 target
Turned on greentea environment
Used special memory region for common CM0/CM4 data
Updated prebuild CM0 SPM hex
Placed shared memory region for flash operations into SPM shared memory region
Updated cyprotection code and configuration
Start address of protected regions is set by a defined number from target.json
Added masters pcMask configuration
Added support for PSA target to WIFI_BT board
Enabled resources protection for SPM
Aligned RAM usage according to Cypress FlashBoot and CyBootloader
alligned protection config
Added CYW943012P6EVB_01_M0 target
Enlarged heap size, remobed nv_seed
Added heap reservation in linker script from mbed-os
Removed heap size definition
turned on nv_seed config
Removed nv_seed macros
Enabled protection for PSoC6 CM0
Added PSoC6 CM0 PSA readme
Enabled mbed_hal-spm test
Enabled nv_seed and removed unneeded ipc config define
Added SPDX string to feature_ble cypress target files
Removed unneeded supported_toolchains lines for Cypress targets
Disabled protection settings
Corrected flash initialization for PSoC6 CM0 PSA
Changed PSoC6 IPC6 protection for flash
Enabled special flash initialization and enabled protection settings
Updated and added new prebuild PSoC6 CM0 PSA hex files
Disabled HW TRNG and CRC for PSoC6 CM4 PSA target
Added missing const to allow types to match
Updated PSoC6 WIFI_BT_PSA prebuilt directory
Moved PSoC6 shared section usage area definition to begin of ld
Added initial ARM_STD linker and startup files for PSoC6 CM0
Added initial IAR linker and startup files for PSoC6 CM0
Added defines to disable some SPM protection settings for PSoC64
Moved Flash function variables into separate memory region
Added defines for new Public area definition
Updated PSoC6 CM0_PSA hex-files
On platforms using coretx m33 accessing the secure memory will cause SecureFault instead of Hardfault.
SecureFault is implemented in the secure image and cannot be changed in runtime.
-Add bug fix for psa_security_lifecycle_state function - PR #9745
-Remove lifecycle data from temp boot status data
-Update attesttation_partition_json file to use
PSA_PLATFORM_LC_GET and generate partition
code - auto generated files update
A DTR line is used to signal that the host has configured a terminal and
is ready to transmit and receive data from the USB CDC/Serial device.
When this test suite is run with the use of a Linux host, a workaround has
to be used to overcome some platform specific DTR line behavior.
Every time the serial port file descriptor is opened, the DTR line is
asserted until the terminal attributes are set.
As a consequence, the device receives a premature DTR signal with a
duration of 200-500 us before the correct, long-lasting DTR signal set by
the host-side test script. (tested on the Linux kernel 4.15.0)
The solution is to wait for the first DTR spike, ignore it, and wait for
the correct DTR signal again.
Update the serial host test to set DTR low before opening a serial
port. Set DTR high once the serial object is ready. This ensures that
no data is sent by the device until the host is ready.
Despite having ECHO and ECHOCTL POSIX lflags disabled by default by
pyserial, a delay is needed for host to properly handle data received
from USB serial/CDC device.
With no delay host would echo 0x00-0x31 characters prefixed with '^'.
RAJKUMAR KANAGARAJ
Przemyslaw Stekiel
Mirela Chirica
Filip Jagodzinski
Martin Kojtal
Jayasankar Nara
Mike Naberezny
Maciej Bocianski
Hugues Kamba
Ryan Morse
Kyle Kearney
Marcin Tomczyk
jeromecoutant
Anna Bridge
Kimmo Vaisanen
Michal Paszta
Matthew Macovsky
Antti Kauppila
int_szyk
Qinghao Shi
Amanda Butler
George Psimenos
Dominika Maziec
Tymoteusz Bloch
Jaeden Amero
Dustin Crossman
Evelyne Donnaes
Laurent Meunier
Chun-Chieh Li
Teppo Järvelin
Szymon Kwiatkowski
Seppo Takalo
Ari Parkkila
Kevin Bracey
Arto Kinnunen
David Saada
Steven Cooreman
Russ Butler
Devaraj Ranganna
Przemyslaw Stekiel
Neil Tuttle
Filip Jagodzinski
d-kato
Lingkai Dong
Mel W
Donatien Garnier
Steve Cartmell
Michael Schwarcz
Olli-Pekka Puolitaival
Guillermo Alonso
Alexander Zilberkant
Oren Cohen
Cruz Monrreal
Deepika
itayzafrir
Mirela Chirica
Netanel Gonen
Oren Cohen
Mahesh Mahadevan
Oleg Kapshii
kegilbert
Senthil Ramakrishnan
Moran Peker
Moran Peker