Previous logic was allowing external storage to be tampered by setting
write-protected keys, so values could not be updated, but it was still
used by get().
TDBStore used to rely on Flash devices erase value.
This logic has been removed, and TDBStore can do the entire erase
logic itself, in case the given BlockDevice does not offer erase().
This relies on BlockDevice to properly return -1 in BlockDevice::get_erase_value().
Previous logic caused garbage collection to kick in, if the init() was
called on empty storage. This has effect of erasing areas twice, if both
areas were empty.
Re-write logic so that we erase areas only on garbage_collect() or reset().
The init() logic already chooses the active area, so no need to touch,
until keys are modified.
Removed also the is_erase_unit_erased() as this is working only on
FLASH devices, and TDBStore should be refactored to work on all storages.
Change the "reserved data" logic so that every time we erase and area,
the content of reserved data is then immediately copied to newly erased
area. This keeps two copies of the data.
When data is requested, return only if checksum is matching.
When data is written, only allow if BOTH checksums are incorrect, meaning
that areas are either corrupted or erased.
Only exception is TDBStore::reset() which erases all keys and reserved data.
Removed all logic that tried to detect, if reserved are was erased or
corrupted. Rely entirely on checksum.
Add moduletest for reserved data.
When using MbedCRC, init value must be non-reversed, regardless of
`reflect_data` or `reflect_out` settings. This means we need to reflect
the intermediate output before passing using it as the next init value.
(In GCC this ends up putting in two `RBIT` instructions back-to-back,
because it's implemented as assembler, so it doesn't know how to
optimise. In ARMC6, `__RBIT` is implemented as an intrinsic, so adding
this reflection cancels the existing reflection and makes the code
smaller).
* Make mbed_error use bitwise MbedCRC call rather than local
implementation.
* Remove use of POLY_32BIT_REV_ANSI from LittleFS.
* Move some MbedCRC instances closer to use - construction cost is
trivial, and visibility aids compiler optimisation.
Previously Greentea tests was not initialising its storage
before asking for bd->get_program_size(), causing FlashBlockDevice to
return zero. This caused both TDBStorage's to use zero for both
parameter to SlicingBlockDevice(bd, 0, 0), effetivaly both then
used same addresses for slice. This caused SecureStore tests
to fail, because writes to internal RBP storage overwrote keys
from external storage.
Fine-tune TDBStore sizes, so that all tests can fit into storage.
At least with LPC55S69's default TDBStore configuration it's
impossible to run storage Greentea tests without exhausting the
memory reserved for storing keys.
Fixes an issue where number of keys were removed based on number of
threads which didn't have anything to do with the test case.
Fixes an issue where number of keys were assumed to be constant
but variable number was used for configuration.
In case our are contains data from previous reset() or reset_area(),
we might end up in the situation where free space contains valid
key headers, but we have not erased that area yet. This can cause
failures if the deinit() and init() because new scan of that area
would continue as long as keys are found. This causes keys on the
not-yet-erased area to be included in the new instance of TDBStore.
To prevent this failure, check after each key-write that our free
space does not contain valid key headers. Also make sure that we
erase one program unit sector over the master record. If we erased
just the master record,first key might is still there, causing next
init() to find it. Extend erase area by one program unit, so that
build_ram_table() won't find any keys.
With tickless mechanism hsem can be used for quite a long time
(time to set up PLL clock).
Also, if hsem is held to long, then this is not the current core which is faulty,
but probably the other (the one which hold the HSEM)
Added support to Wi-SUN tasklet for following mbed-mesh-api .json configuration options:
wisun-uc-channel-function
wisun-bc-channel-function
wisun-uc-fixed-channel
wisun-bc-fixed-channel
wisun-bc-interval
wisun-bc-dwell-interval
wisun-uc-dwell-interval
This allows e.g. enabling single channel configuration for testing.
This pull request does not change existing functionality since when
defaults from mbed-mesh-api .json are used, no new or changed
ws_management_* interface calls are made.
Remove lwIP reliant networking and BLE tests for baremetal
Mbed OS 5 ported lwIP in its OS mode and uses threads. Networking
that rely on lwIP needs to be removed so it can be compiled with the
baremetal profile.
The BLE cordio Greentea tests are also disabled given that the feature
is not supported without an RTOS.
MBED_DEPRECATE macros is added to string-based APIs.
New, non-string-based APIs are added in their place.
Wiced binaries rebuilt
Any existing stubs or mocks are adjusted to compile and run with the newly added non-string based functions.
Previously it was 2 pages - 1kB - which isn't sufficient to store
Reserved Area and Master Record. Reserved are requires one page and Master
Record takes two pages. With 512B page size and having two areas, active and
inactive, the minimum size requirement becomes 2 areas * 3 pages = 3kB. That
isn't enough to store any keys though.
Cypress Target update to support WiFi Manufacturing Test
Adding IOCTLS in WhdSTAInterface for MFG Test.
Fix WHD EMAC interface to release buffer when emac is not powered up or callback
is not registered.
As per 3GPP TS 24.301:
If the UE supports NB-S1 mode, Non-IP PDN type, or N1 mode,
then the UE shall support the extended protocol configuration options IE.
...
If the UE supports the extended protocol configuration options IE,
then the UE shall set the ePCO bit to extended protocol configuration options supported
in the UE network capability IE of the ATTACH REQUEST message.
* Make mbed_error use bitwise MbedCRC call rather than local
implementation.
* Remove use of POLY_32BIT_REV_ANSI from LittleFS.
* Move some MbedCRC instances closer to use - construction cost is
trivial, and visibility aids compiler optimisation.
The addition of trace logging during greentea tests pushes the multithreaded
read-write test beyond the limits of the stack it allocates for its threads.
The increase of 128 bytes was chosen by experimentation.
-Added the mbedtls,crypto,psa,filesystem,fat,littlefs in baremetal.json to resolve compiler issue
-Disable metrics that are not available for bare metal
-Moved the baremetal.json inside TESTS/configs directory
-Added the baremetal.json on Tests directory to enable bare-metal
-Conditional enable of greentea metrics
Note:
Run green tea with bare metal
mbed test -m target -t GCC_ARM -n tests-mbed_platform-transaction --app-config TESTS/baremetal.json
_inc_set_handle is new'd in SecureStore::init(), then its members are
referenced in various functions without being explicitly initialized
first. These pre-existing values can confuse the SecureStore's internal
state and cause various undesired behavior.
DeviceKey was using mbedtls_ssl_safer_memcmp() to compare result against
buffer of equal length, but zero content. This comparison makes no sense
as the entropy function is already returning proper error, if it fails.
* Change MBED_ASSERTS() to return valid error code, so that
checks are not bypassed on release builds.
* Fix starting address calculations so that "addr" parameter is always
relative to SlicingDevice and "_start" is only added when calls to
underlying storage block is made.
* Bypass BlockDevice:is_valid_*() to underlying block device.
Slicingblockdevice was just verifying addresses independently, without
verifying those from underlying block storage.
* Refactor some headers to use relative path from Mbed OS root.
* Refactor some data types to compile on 64bit machines.
* Refactor some debug traces to use mbed_trace.
Describe the return values with as much detail as possible, to let user only check the relevant return codes, instead of all nsapi_error_t. Refer to underlying APIs wherever possible.
Protocols like mdns requires IPv6 link local address to be advertised in its
records (AAAA record). LWIP::Interface::bringup() API is creating IPv6 link
local address;But as of now there is no API exposed by mbed-os to get the
IPv6 link local address.
This new API is required to deliver mDNS library support on mbed-os for Cypress
platforms. Unit tested it by invoking get_ipv6_link_local_address with a simple
application.
- Enable FLASHIAP for all H7 boards
- Use "TDB_INTERNAL" for all H7 boards
- Define specific internal_base_address only for DISCO_H747I_CM7
(default address is the end of FLASH which is correct for other H7 boards)
- Correct GetSectorBase function with Dual Bank information
- A shared mutex is added for synchronization
- ScopedMutexLock is used to to protect
- SoftAP: start, stop
- STA: scan, join, disconnect
- Fix switching issue between SoftAP and STA mode for primary interface
- Avoid reinit primary interface by getting mapping the current interface to the other one which is already on
- In concurrent mode, STA is the default if it is up, otherwise SoftAP is default.
- For non-concurrent mode, the most recent started interface is set as default.
- Add WhdAccessPoint to include additional WHD scan info
- To save memory, only move assignment is supported for WhdAccessPoint
- Add scan_whd to scan for WhdAccessPoint
- Set set_blocking(false) to unsupported by return NSAPI_ERROR_UNSUPPORTED
Originally, when DEVICE_TRNG is defined, MBEDTLS_ENTROPY_HARDWARE_ALT will also be defined
accordingly to provide entropy source. This is fine for targets supporting TRNG. However, for
targets without TRNG, it is also possible to provide non-TRNG entropy source solution via the
define MBEDTLS_ENTROPY_HARDWARE_ALT. Related discussion can be found at:
https://github.com/ARMmbed/mbed-os/issues/11680
Add 2 targets for DISCO_H747I dualcore:
* DISCO_H747I -> for CM7 core
* DISCO_H747I_CM4 -> for CM4 core
Current restrictions:
* TICKLESS deactivated
* DeepSleep not supported (DeepSleep wrapped to sleep)
Warning: use of the same IP (example I2C1) by both core at the same time is not prevented,
but is strongly not recommended.
Some Hardware Semaphore are use for common IP, to manage concurrent access by both cores: Flash, GPIO, RCC.
Warning: Drag and drop of binary to DISCO_H747I will flash CM7.
In order to flash CM4, one can use STM32 CubeProgrammer tool.
Problem Statement:
During multicast join sequence, InternetSocket::join_multicast_group() calls InternetSocket::modify_multicast_group(). modify_multicast_group() sets up the multicast group address (i.e., mreq.imr_multiaddr) to be joined and the interface address (i.e., mreq.imr_interface) to be used for the multicast join request. The interface address is initialized with the default value, which sets the version of interface address to NSAPI_UNSPEC. This results in LWIP::setsockopt() API to attempt IPv6 multicast join on the IPv4 interface address, hence IPv6 multicast join always fails with the protocol error.
Fix:
Initialize interface address version based on the multicast address version in LWIP::setsockopt(), before attempting multicast join operation.
AT_CellularContext::do_connect() is a virtual API and therefore can be overwritten in
inherited class. The problem was that it sets AT_CellularContext::_is_connected flag but
earlier it was set as private member making it impossible to set in overwritten do_connect()
method.
This commit fixes the problem by changing _is_connected as protected enabling its use
in inherited class.
As of 722628be02, the "remainder" configuration
also uses the default location near the end of flash. Which makes the two tests
nearly identical with the exception that the "last two sectors" test correctly
handles parts with a low (possibly 1:1) erase size to program size ratio.
Therefore, change the "remainder" test to instead be a "default" test that uses
the tdb_internal_address/size values, so that it
a.) tests something meaningfully different and
b.) tests using the custom TDB address/size values if they are provided.
c.) functions correctly on devices where the default sector-based size computation
does not work (e.g. because of the low erase size to program size ratio)
and therefore a custom location and size has been specified.
The is_conf_tdb_internal variable is unused and therefore removed.
This is related to https://github.com/ARMmbed/mbed-os/issues/11256
When TARGET_PSA is enabled on Cortex-A boards, the SECURE
is redeclared. So to minimize the impact we can redeclare this in
val.h which is used only by Mbed. And `security_t` itself is used in
mbed-os\components\TARGET_PSA\TESTS, but the SECURE string is not used.
Renamed to `caller_security_t` which aligns with
https://github.com/ARM-software/psa-arch-tests
The QSPI spec allows alt to be any size that is a multiple of the
number of data lines. For example, Micron's N25Q128A uses only a
single alt cycle for all read modes (1, 2, or 4 bits depending on
how many data lines are in use).
We get this compiler warning;
Compile [ 7.9%]: AT_CellularDevice.cpp
[Warning] AT_CellularDevice.cpp@206,18: variable 'err' set but not used [-Wunused-but-set-variable]
Due to the fact, that the code that would actually use this variable
is behind trace flags. Based on review feedback from Antti Kauppila and
Kimmo Väisänen, adding same flagging also for that.
- Reason being - the operation needs to be within the locks.
Return value was ignored, and TDBStore:init() ended up in a
MBED_ERROR() phase after that.
TDBStore API was limited to allow returning of only two separate
errors, which may end up hiding the actual return value. Change
the documentation slightly to allow returning of original error
code from the underlying block device.
Fixes#11591
_ongoing_tx_msg was incorrectly initialized before _mlme_confirmation.
Fixes following build warning:
[Warning] LoRaMac.h@691,26: 'LoRaMac::_ongoing_tx_msg' will be initialized after [-Wreorder]
[Warning] LoRaMac.h@689,28: 'loramac_mlme_confirm_t LoRaMac::_mlme_confirmation' [-Wreorder]
[Warning] LoRaMac.cpp@68,1: when initialized here [-Wreorder]
- When calling socket APIs when socket is not open, NSAPI_ERROR_NO_SOCKET will be
returned instead of generic NSAPI_ERROR_DEVICE_ERROR
- If socket_send() is called when connection is not open, NSAPI_ERROR_NO_CONNECTION
will be returned instead of generic NSAPI_ERROR_DEVICE_ERROR
Some external modems have an internal TLSSocket implementation which can be used
instead of mbedtls based TLSSocket. Using offloaded TLSSocket can result in
significantly reduced ROM usage.
Offloaded TLSSocket can be enabled by enabling "nsapi.offload-tlssocket" and the used
network stack (e.g. cellular modem's CellularStack class) must support the setsockopt's
defined in nsapi_types.h.
Compared to original mbedtls based TLSSocket, offloaded TLSSocket brings in one significant
API limitation. Offloaded TLSSocket requires setting of certificates and keys after open()
and before connect() calls, where mbedtls based TLSSocket allows setting these before open()
call.
The default computation assumes that a flash sector is several times
larger than a flash page. On PSoC 6 targets this is not the case
(the two values are the same) so the computed size is too small.
This is a similar change to 1b1f14d36b,
but for devices which implement TDB in internal storage.
Wi-SUN mesh API uses now nanostack certificate interface with length parameters.
This enables that either PEM or DER formatted certificates can be used. Using
the length configuration for certificates and keys is optional, so existing
applications using the PEM certificates do not require changes.
QISEND command can respond either SEND OK, SEND FAIL or ERROR.
If response is not SEND OK, sent bytes should not be checked but
error should be reported.
Possible responses for send command are SEND OK<cr><ln>, SEND FAIL<cr><ln> or ERROR<cr><ln>
so normal OK<cr><ln> response check does not work properly.
Mbed TLS's export keys callback requires the hello.random (for both
server and client) to be const. Make the callbacks in Mbed OS that use
the key export feature use const to match.
Multihoming documentation about interface name:
"Two character name string is concatenated with 8 bit value containing index which is incremented on each netif addition"
Cellular uses context id as index and to follow LWIP (LWIP::Interface::get_interface_name), index does not include leading zeros.
Random initialization sequence is causing start up issues in multiple platform
when done at construction phase.
The right thing is to delay the random initialization to later stage when the
message id is actually required. This provides system to do all necessary allocation
upfront without causing any random race condition at startup phase.
A new API `CellularDevice::clear()` to clean-up the modem to a default initial state.
Function is virtual so it can be overridden. The default implementation clears all PDP contexts,
but the the first one if that has APN defined as `nsapi.default-cellular-apn`.
CellularStateMachine calls `clear()` to clean-up the modem on initial `connect()`,
if the flag `cellular.clear-on-connect: true` is defined.
In some multithread cases there is possibility that process_oob function
was called after ATHandler was deleted. Fix is to wait if oob processing
is ongoing.
By default CoAP will create a copy of the whole data to be passed to application and it keeps the backward compatibility.
If enabled, application must NOT free the payload when it gets the COAP_STATUS_PARSER_BLOCKWISE_MSG_RECEIVED status.
And application must call sn_coap_protocol_block_remove() instead.
This PR is to fix the issues in LwIP for AutoIP which is required for passing Bonjour Conformance Test for mDNS. Following gives the summary of the changes/fixes added.
Changes:
1. Following issues are fixed in LwIP for AutoIP.
- Fixed bug in max conflict rate limiting: According to RFC section RFC 3927 Section 2.2.1 conflict probe interval should be increased to 60 seconds, once conflict count reaches after MAX_CONFLICTS (i.e., 10) counts. The initial value of 'autoip->tried_llipaddr' is 0. Hence the probe interval (i.e., autoip->ttw) should be increased to 60 secs when 'autoip->tried_llipaddr >= MAX_CONFLICTS'
- Added code to free 'autoip' client in autoip_stop() API: New 'autoip' client is allocated in autoip_start() API, and the client is not freed during autoip_stop(). This would result in memory leak, if not freed. Updated autoip_stop() API to take care of releasing the memory allocated for 'autoip' client.
2. Introduced a configurable macro "MBED_CONF_LWIP_DHCP_TIMEOUT" in "lwipopts.h" to configure DHCP timeout based on the usecase requirement. For example: bonjour conformance test would need a DHCP timeout value which is grater than 320 secs to run mDNS probing test to verify protocol compilance of the implementation.
Tested the fixes using Bonjour Conformance Test tool Version 1.5.0 for IPv4. It has successfully passed Bonjour Conformance Test.
- Reduce heap footprint by storing only single block when receiving a blockwise message.
* User is now responsible of freeing the data by calling sn_coap_protocol_block_remove() and must not free the payload separately.
- Bug fix: Request blockwise transfer if incoming payload length is too large and when it comes without block indication.
When flashing a binary STLink won't skip writing padding which happens
to be the same value as flash's erase value. STM32L4 based targets
have an additional 8-bit of embedded ECC for each 64-bit word of data.
The initial value, when a sector is erased, for the ECC bits is 0xFF.
When you write the erase value to a given address these bits gets
modified to something different due to the ECC algoritm in use. The
visible bits are intact but difference in ECC value prevents flipping
any 1's to 0's. Only way to proceed is to erase the whole sector.
New ATHandler functions taken into use for rest of the targets (BG96 was updated initially) to reduce code size. This means basically that new functions using variadic list approach are taken into use and with those one can usually write AT commands in single line instead of multiple lines.
Only internal changes and API's are not modified.
Changes:
1. Following issues are fixed in LwIP for AutoIP.
a) Fixed bug in max conflict rate limitting.
- According to RFC section RFC 3927 Section 2.2.1 conflict probe interval
should be increased to 60 seconds, once conflict count reaches after
MAX_CONFLICTS (i.e., 10) counts.
- The initial value of 'autoip->tried_llipaddr' is 0. Hence the probe
interval (i.e., autoip->ttw) should be increased to 60 secs
when 'autoip->tried_llipaddr >= MAX_CONFLICTS'
b) Added code to free 'autoip' client in autoip_stop() API.
- New 'autoip' client is allocated in autoip_start() API, and the client
is not freed during autoip_stop(). This would result in memory leak
if not freed.
- Updated autoip_stop() API to take care of releasing the memory allocated
for 'autoip' client.
2. Introduced a configurable macro "MBED_CONF_LWIP_DHCP_TIMEOUT" in "lwipopts.h"
to configure DHCP timeout based on the usecase requirement. For example:
bonjour conformance test would need a DHCP timeout value which is grater than
320 secs to run mDNS probing test to verify protocol compilance of the implementation.
The default computation assumes that a flash sector is several times
larger than a flash page. On PSoC 6 targets this is not the case
(the two values are the same) so the computed size is too small.
This could cause incomplete data retrieval and mismatch when reading
data in more than one chunk, because every chunk would be read to the
same location at the beginning of the output buffer.
IAR compilation fails at `_fs = { 0 };` due to
```
[Error] FATFileSystem.cpp@285,0: [Pe029]: expected an expression
```
Changing that object initializer list instead, as that seems
to pass IAR compilation, too.
Changed original memset to object initialiser list based on review
feedback from Kevin Bracey.
We'll use the new ARM-software/psa-arch-tests directly instead for PSA
Crypto API 1.0b3. This commit removes the crypto compliance tests only
for now, leaving attestation and storage tests.
This allows to specify which hal version to use for each family.
It can also be used to modify the thread stack size.
Signed-off-by: Vincent Veron <vincent.veron@st.com>
- Store ACK's also into duplicate info list.
- ROM size optimization. Flash size has gone down ~1100 bytes.
**Closed issues:**
- IOTCLT-3592 - Client does not handle Duplicate ACK messages during blockwise registration correctly
This port is based on :
* CurryGuy ethernet branch :
https://github.com/CurryGuy/mbed-os/tree/feature-stm32h7-emac
* STM32 Cube example :
Applications/LwIP/LwIP_HTTP_Server_Netconn_RTOS example
Signed-off-by: Vincent Veron <vincent.veron@st.com>
To compile Mbed Bootloader with bare metal profile certain defines are
not added anymore automatically. Because of this checks for those
defines needed to be introduced.
Corrected PPP thread stack size for RZ_A1_EMAC, CYW943012P6EVB_01,
CY8CPROTO_062_4343W, CY8CKIT_062_WIFI_BT and CY8CKIT_062S2_43012
that have special configuration for PPP thread size. Removed
pppInterface() helper call from network interface. It causes binary
compatibility break with precompiled network interface classes. Call
is helper function to check network interface type in case it is
unknown, and is not mandatory or used with PPP.
If PPP interface is the lwIP default interface, adds the PPP DNS
servers to default DNS server storage. If PPP is not default
interface, then adds DNS servers to interface specific storage.
Created (a new) PPP interface for PPP service. Removed lwip
dependencies to PPP (memory allocations etc.). Moved PPP
configuration options away from lwIP mbed_lib.json to new
PPP service. For backwards compatibility, using the old
options is also currently supported.
PPP service encapsulates the PPP protocol. PPP interface can be used as
helper class to bind PPP protocol with network stack (similar to
EMAC and L3IP interface). Added PPP interface to onboard network
stack class.
Created PPP service class that encapsulates the PPP protocol.
Class is similar to EMAC and L3IP classes with additional methods
to read IP and DNS server addresses negotiation using PPP and
to set PPP specific parameters (file handle for modem access etc.).
PPP service can use on its own thread or in run in mbed os event
Queue thread.
Added ppp_nsapi.cpp module that implements the nsapi_ppp.h
services.
Added ppp_nsapi.cpp module that implements the nsapi_ppp.h
services.
When AT+CGML is used to retrieve list of SMS stored in modem inbox,
every message has an associated index. ETSI TS 127 005 v7.0.0 does not
specify what is the allowed range of such indices - all it says is
"integer type; value in the range of location numbers supported by the
associated memory".
Usually, AT modems use positive indexes (starting at 1). Quectel BG96
modem takes a different approach, indexing messages starting at 0.
Current implementation of `AT_CellularSMS::list_messages()` considers
index 0 invalid and ignores such message, effectively making it
impossible to access using mbed-os API.
This commit changes the behavior so that value of 0 is handled as any
other positive message index.
Currently, create_pdu receives a destination address without '+' prefix,
and always sets the "type of address" to "unknown". That means, the
number needs to contain appropriate international number prefix (00/011)
if necessary - which is not the case if the leading + is simply
stripped.
This changes send_sms behavior so that when a SMS is sent to an
international number (indicated by leading +):
- AT+CMGS command receives the number with + prefix,
- created PDU has the "international" flag set.
This prevents RX2 window to be enabled at the same time when repeating
transmission, when QoS repeated TX is in effect. Failure to do so
seems to place the LoRaWAN stack in a state where send() always fails
with WOULD_BLOCK error.
The portable and correct way to include Mbed TLS header files is
"mbedtls/someheader.h". It's Mbed OS specific, unecessary, and incorrect
to use "mbedtls/inc/mbedtls/someheader.h".
Thus far the default position has been after the application plus two
spare sectors. For simplicity and to have a predictable location for the
TDBStore with the default configuration the location is now switched to
the end of the flash. Two last sectors to be exact.
CellularContext now tries to get an IP address after connect and before
sending NSAPI_STATUS_GLOBAL_UP. Even if we don't the IP address from
the modem we will send NSAPI_STATUS_GLOBAL_UP and return success.
Modem has an ip address but for some reason some modems don't
give it to us.
Macro which restricted compilation to GCC_ARM is removed.
Existing read_write() test is amended to call stat() and check that correct size is returned.
AT commands used in read_radio_technology() function are not supported
by all boards so moving the function where it's actually used. Usage was
already inside of the #ifdef's.
If delete fails there is nothing we or application can do. There is no point
returning an error for this. This affects to AT_CellularContext::disconnect
not returning an error if context delete fails.
* Modify Doxygen grouping of `drivers` Public/Internal APIs
* Correct classification of `mbed_events.h`
* Amend name of Doxygen group containing Device Key API
* Classify `CallChain.h` as public API and relocate file
* Remove Doxygen group from `equeue_platform.h` as it has no Doxygen compliant documentation
* Move USB target specific code back to `usb/device/targets`
* Fix rtos include path in NRFCordioHCIDriver
* Flatten USB driver directory structure
* Add missing include for us_ticker
* Add more missing includes for us_ticker
* Fix mbed_hal_fpga_ci_test_shield/uart test
* Fix bare-metal build
* Fix Watchdog UNITTEST
* Fix Mbed OS 2 build for Public/Internal headers relocating
Separate drivers, events, and rtos internal APIs from public APIs.
* Move source files to source subdirs
* Move internal headers to internal subdirs
* Add Doxygen comments for documenting internal and public APIs
* Remove source code from header files in order to remove include pre-processor directives
that included header files not directly used by said header files
* Explicitly include header files instead of implicit inclusions via third-party header files.
Release Notes
This will break user code that was using an internal API as the internal header files have been moved.
This will only break if the user was including the header file using a namespace (i.e #include "foo/bar.h" instead of #include "bar.h"
Add a deinit function that will be called and check inside
whether context is initialized. This function is called for
freeing the CC context, instead of every time check that it's
initizliaed and free it.
Initiate the CC context in the starts function and in the reset.
In the reset function, free aes context before.
Free the context in the finish function and reset function.
* Adjust definition to make the default constructor `constexpr`.
This permits use in classes that want lazy initialization and their
own `constexpr` constructor, such as `mstd::mutex`.
* Add `get_no_init()` method to allow an explicit optimisation for
paths that know they won be the first call (such as
`mstd::mutex::unlock`).
* Add `destroy()` method to permit destruction of the contained object.
(`SingletonPtr`'s destructor does not call its destructor - a cheat
to omit destructors of static objects). Needed if using in a class
that needs proper destruction.
- Add the no confidentiality & no replay protection flags
- Add actual size parameter in PS/ITS get APIs
- Change a few size parameters from uint32_t to size_t
Have the alternative aes undefined by default,
in order not to break backwards compatability.
`MBEDTLS_CTR_DRBG_USE_128_BIT_KEY` remains defined for better usability.
Fix minor style fixes and typos:
1. Change file name to correct one.
2. Change copyright year.
3. Insert whitespaces before and after paranthesis.
4. Put `*` next to pointer name.
Add support for CC310 CMAC driver returning
`MBEDTLS_ERR_PLATFORM_FEATURE_UNSUPPORTED` for key size other than 128 bits,
and for crypto algorithms other than AES( e.g. DES).
Martin Kojtal
Seppo Takalo
Piotr Stolarz
jeromecoutant
Veijo Pesonen
Ari Parkkila
Michal Paszta
Kevin Bracey
Hamza Rizwan
Alexandre Bourdiol
Mika Leppänen
Peter Ferland
Adrien CABARBAYE
Antti Kauppila
Hugues Kamba
Balaji Subramanyam
Antti Yli-Tokola
Kyle Kearney
Jarkko Paso
fred.li
Arun S
Anna Bridge
Tymoteusz Bloch
amq
Kimmo Vaisanen
Matthew Macovsky
Bence Kaposzta
Ryan Morse
RAJKUMAR KANAGARAJ
George Beckstein
Wajahat Abbas
Mirela Chirica
Jayasankar Nara
Janne Kiiskila
Balaji
Lei Zhang
midd
Chun-Chieh Li
mudassar-ublox
Mukund Ghonasgi
desmond.chen
Ilia Penev
Jaeden Amero
Sathish Kumar Mani
Rohan Fletcher
Christopher Haster
Vikas Katariya
Mika Tervonen
int_szyk
Syed Fahimuddin Alavi
Ron Eldor
Yogesh Pande
Darryl Green
Kostiantyn Tkachov
Teppo Järvelin
George Psimenos
Roman Okhrimenko
aqib-ublox
Vairamuthu Ramasamy
Qinghao Shi
Arto Kinnunen
Jammu Kekkonen
Vincent Veron
Kari Haapalehto
Marcin Radomski
Teijo Kinnunen
Paul Szczepanek
paul-szczepanek-arm
Mahesh Mahadevan
Dominika Maziec
Teja Narahari
Reda Maher
Marcin Tomczyk
Ben Cooke
Balaji
Amanda Butler
David Saada
Evelyne Donnaes
Volodymyr Medvid
Volodymyr Medvid
Philipp Steiner