Allow WhdAccessPoint scan result with extended parameters

- Add WhdAccessPoint to include additional WHD scan info
- To save memory, only move assignment is supported for WhdAccessPoint
- Add scan_whd to scan for WhdAccessPoint
- Set set_blocking(false) to unsupported by return NSAPI_ERROR_UNSUPPORTED

features/netsocket/emac-drivers/TARGET_WHD/interface/WhdAccessPoint.cpp

@@ -0,0 +1,65 @@
+/* WHD Access Point Interface Implementation
+ * Copyright (c) 2018-2019 ARM Limited
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <cstdlib>
+#include <utility>
+#include "WhdAccessPoint.h"
+
+WhdAccessPoint::WhdAccessPoint(nsapi_wifi_ap_t ap, whd_bss_type_t bss_type, uint8_t *ie_ptr, uint32_t ie_len) :
+    WiFiAccessPoint(ap), _bss_type(bss_type)
+{
+    _ie_ptr = (uint8_t *)malloc(ie_len * sizeof(uint8_t));
+    if (_ie_ptr != NULL) {
+        _ie_len = ie_len;
+        memcpy(_ie_ptr, ie_ptr, ie_len * sizeof(uint8_t));
+    }
+}
+
+WhdAccessPoint &WhdAccessPoint::operator=(WhdAccessPoint &&rhs)
+{
+    if (this != &rhs) {
+        WiFiAccessPoint::operator=(rhs);
+        _bss_type = rhs._bss_type;
+        _ie_ptr = rhs._ie_ptr;
+        _ie_len = rhs._ie_len;
+        rhs._ie_ptr = NULL;
+        rhs._ie_len = 0;
+    }
+    return *this;
+}
+
+whd_bss_type_t WhdAccessPoint::get_bss_type() const
+{
+    return _bss_type;
+}
+
+uint8_t *WhdAccessPoint::get_ie_data() const
+{
+    return _ie_ptr;
+}
+
+uint32_t WhdAccessPoint::get_ie_len() const
+{
+    return _ie_len;
+}
+
+WhdAccessPoint::~WhdAccessPoint()
+{
+    if (_ie_ptr != NULL) {
+        free(_ie_ptr);
+    }
+}

features/netsocket/emac-drivers/TARGET_WHD/interface/WhdAccessPoint.h

@@ -0,0 +1,74 @@
+/* WHD Access Point Interface
+ * Copyright (c) 2017-2019 ARM Limited
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef WHD_ACCESS_POINT_H
+#define WHD_ACCESS_POINT_H
+
+#include "netsocket/WiFiAccessPoint.h"
+#include "whd_types.h"
+
+/* Enum for scan result type */
+enum scan_result_type {
+    SRES_TYPE_WIFI_ACCESS_POINT,
+    SRES_TYPE_WHD_ACCESS_POINT
+};
+
+/** WhdAccessPoint class
+ *
+ *  Class that represents a Whd Access Point
+ *  which contains additional Whd specific information
+ */
+class WhdAccessPoint : public WiFiAccessPoint {
+public:
+    WhdAccessPoint() : WiFiAccessPoint() {};
+    WhdAccessPoint(nsapi_wifi_ap_t ap, whd_bss_type_t bss_type, uint8_t *ie_ptr, uint32_t ie_len);
+
+    /** Define move assignment and prevent copy-assignment
+     *
+     *  Due to IE element data could have large memory footprint,
+     *  only move assignment is allowed.
+     */
+    WhdAccessPoint &operator=(WhdAccessPoint &&rhs);
+    WhdAccessPoint &operator=(const WhdAccessPoint &rhs) = delete;
+
+    /** Get WHD access point's bss type
+     *
+     *  @return The whd_bss_type_t of the access point
+     */
+    whd_bss_type_t get_bss_type() const;
+
+    /** Get WHD access point's IE data
+     *
+     *  @return The pointer to ie data buffer
+     */
+    uint8_t *get_ie_data() const;
+
+    /** Get WHD access point's IE length
+     *
+     *  @return The ie data length
+     */
+    uint32_t get_ie_len() const;
+
+    virtual ~WhdAccessPoint();
+
+private:
+    whd_bss_type_t _bss_type;
+    uint8_t *_ie_ptr;          /**< Pointer to received Beacon/Probe Response IE(Information Element)         */
+    uint32_t _ie_len;          /**< Length of IE(Information Element)                                         */
+};
+
+#endif

features/netsocket/emac-drivers/TARGET_WHD/interface/WhdSTAInterface.cpp

@@ -37,6 +37,7 @@
 
 struct whd_scan_userdata {
     rtos::Semaphore *sema;
+    scan_result_type sres_type;
     WiFiAccessPoint *aps;
     std::vector<whd_scan_result_t> *result_buff;
     unsigned count;
@@ -173,6 +174,7 @@ static void *whd_wifi_link_state_change_handler(whd_interface_t ifp,
     return handler_user_data;
 }
 
+
 MBED_WEAK WhdSTAInterface::OlmInterface &WhdSTAInterface::OlmInterface::get_default_instance()
 {
     static OlmInterface olm;
@@ -395,7 +397,6 @@ static void whd_scan_handler(whd_scan_result_t **result_ptr,
     if (data->count > 0 && data->aps != NULL) {
         // get ap stats
         nsapi_wifi_ap ap;
-
         uint8_t length = record->SSID.length;
         if (length < sizeof(ap.ssid) - 1) {
             length = sizeof(ap.ssid) - 1;
@@ -408,17 +409,21 @@ static void whd_scan_handler(whd_scan_result_t **result_ptr,
         ap.security = whd_tosecurity(record->security);
         ap.rssi = record->signal_strength;
         ap.channel = record->channel;
-        data->aps[data->offset] = WiFiAccessPoint(ap);
+        if (data->sres_type == SRES_TYPE_WIFI_ACCESS_POINT) {
+            data->aps[data->offset] = WiFiAccessPoint(ap);
+        } else if (data->sres_type == SRES_TYPE_WHD_ACCESS_POINT) {
+            WhdAccessPoint *aps_sres = static_cast<WhdAccessPoint *>(data->aps);
+            aps_sres[data->offset] = std::move(WhdAccessPoint(ap, record->bss_type,
+                                                              record->ie_ptr, record->ie_len));
+        }
     }
 
     // store to result_buff for future duplication removal
     data->result_buff->push_back(*record);
     data->offset = data->result_buff->size();
-
 }
 
-
-int WhdSTAInterface::scan(WiFiAccessPoint *aps, unsigned count)
+int WhdSTAInterface::internal_scan(WiFiAccessPoint *aps, unsigned count, scan_result_type sres_type)
 {
     // initialize wiced, this is noop if already init
     if (!_whd_emac.powered_up) {
@@ -426,6 +431,7 @@ int WhdSTAInterface::scan(WiFiAccessPoint *aps, unsigned count)
     }
 
     interal_scan_data.sema = new Semaphore();
+    interal_scan_data.sres_type = sres_type;
     interal_scan_data.aps = aps;
     interal_scan_data.count = count;
     interal_scan_data.offset = 0;
@@ -449,6 +455,16 @@ int WhdSTAInterface::scan(WiFiAccessPoint *aps, unsigned count)
     return res;
 }
 
+int WhdSTAInterface::scan(WiFiAccessPoint *aps, unsigned count)
+{
+    return internal_scan(aps, count, SRES_TYPE_WIFI_ACCESS_POINT);
+}
+
+int WhdSTAInterface::scan_whd(WhdAccessPoint *aps, unsigned count)
+{
+    return internal_scan(aps, count, SRES_TYPE_WHD_ACCESS_POINT);
+}
+
 int WhdSTAInterface::is_interface_connected(void)
 {
     if (!_whd_emac.ifp) {

features/netsocket/emac-drivers/TARGET_WHD/interface/WhdSTAInterface.h

@@ -21,6 +21,7 @@
 #include "netsocket/WiFiInterface.h"
 #include "netsocket/EMACInterface.h"
 #include "netsocket/OnboardNetworkStack.h"
+#include "WhdAccessPoint.h"
 #include "whd_emac.h"
 #include "whd_types_int.h"
 
@@ -31,7 +32,6 @@ struct ol_desc;
  */
 class WhdSTAInterface : public WiFiInterface, public EMACInterface {
 public:
-
     class OlmInterface {
     public:
         /** Get the default OLM interface. */
@@ -117,17 +117,33 @@ public:
         return 0;
     }
 
+    /** Set blocking status of interface. 
+     *  Nonblocking mode unsupported.
+     *
+     *  @param blocking true if connect is blocking
+     *  @return         0 on success, negative error code on failure
+     */
+    nsapi_error_t set_blocking(bool blocking)
+    {
+        if (blocking) {
+            _blocking = blocking;
+            return NSAPI_ERROR_OK;
+        } else {
+            return NSAPI_ERROR_UNSUPPORTED;
+        }
+    }
+
     /** Gets the current radio signal strength for active connection
      *
      * @return          Connection strength in dBm (negative value)
      */
     int8_t get_rssi();
 
-    /** Scan for available networks
+    /** Scan for available networks in WiFiAccessPoint format
      *
      * This function will block.
      *
-     * @param  ap       Pointer to allocated array to store discovered AP
+     * @param  ap       Pointer to allocated array of WiFiAccessPoint format for discovered AP
      * @param  count    Size of allocated @a res array, or 0 to only count available AP
      * @param  timeout  Timeout in milliseconds; 0 for no timeout (Default: 0)
      * @return          Number of entries in @a, or if @a count was 0 number of available networks, negative on error
@@ -135,6 +151,18 @@ public:
      */
     int scan(WiFiAccessPoint *res, unsigned count);
 
+    /** Scan for available networks in WhdAccessPoint format
+     *
+     * This function will block.
+     *
+     * @param  ap       Pointer to allocated array of WhdAccessPoint format for discovered AP
+     * @param  count    Size of allocated @a res array, or 0 to only count available AP
+     * @param  timeout  Timeout in milliseconds; 0 for no timeout (Default: 0)
+     * @return          Number of entries in @a, or if @a count was 0 number of available networks, negative on error
+     *                  see @a nsapi_error
+     */
+    int scan_whd(WhdAccessPoint *res, unsigned count);
+
     /* is interface connected, if yes return WICED_SUCCESS else WICED_NOT_CONNECTED */
     int is_interface_connected();
 
@@ -208,8 +236,11 @@ public:
         int ret = _olm->wake();
         return ret;
     }
-private:
 
+protected:
+    int internal_scan(WiFiAccessPoint *aps, unsigned count, scan_result_type sres_type);
+
+private:
     char _ssid[33]; /* The longest possible name (defined in 802.11) +1 for the \0 */
     char _pass[64]; /* The longest allowed passphrase + 1 */
     nsapi_security_t _security;

features/netsocket/emac-drivers/TARGET_WHD/interface/WhdSoftAPInterface.h

@@ -131,6 +131,21 @@ public:
      */
     int unregister_event_handler(void);
 
+    /** Set blocking status of interface. 
+     *  Nonblocking mode unsupported.
+     *
+     *  @param blocking true if connect is blocking
+     *  @return         0 on success, negative error code on failure
+     */
+    nsapi_error_t set_blocking(bool blocking)
+    {
+        if (blocking) {
+            _blocking = blocking;
+            return NSAPI_ERROR_OK;
+        } else {
+            return NSAPI_ERROR_UNSUPPORTED;
+        }
+    }
 
 protected:
     WHD_EMAC &_whd_emac;