mirror of https://github.com/ARMmbed/mbed-os.git
DISCO STM32H747I ETHERNET support, but disabled.
Ethernet is disabled by default, because some hardware modifications are required on the board DISCO_H747I. see https://os.mbed.com/teams/ST/wiki/DISCO_H747I-modifications-for-Ethernetpull/11827/head
jeromecoutant
Alexandre Bourdiol
parent
c77b824ecc
commit
7fcedd20e1
|
|
@ -0,0 +1,149 @@
|
|||
/* mbed Microcontroller Library
|
||||
* Copyright (c) 2018, STMicroelectronics
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
#define ETHERNET 1
|
||||
#if (MBED_CONF_TARGET_NETWORK_DEFAULT_INTERFACE_TYPE == ETHERNET)
|
||||
#if !defined(DISCO_H747I_ETHERNET_SOLDERBRIGE)
|
||||
#error Hardware modifications are required for Ethernet on DISCO_H747I. see https://os.mbed.com/teams/ST/wiki/DISCO_H747I-modifications-for-Ethernet
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#ifndef USE_USER_DEFINED_HAL_ETH_MSPINIT
|
||||
|
||||
#include "stm32h7xx_hal.h"
|
||||
|
||||
#define ETH_TX_EN_Pin GPIO_PIN_11
|
||||
#define ETH_TX_EN_GPIO_Port GPIOG
|
||||
#define ETH_TXD1_Pin GPIO_PIN_12
|
||||
#define ETH_TXD1_GPIO_Port GPIOG
|
||||
#define ETH_TXD0_Pin GPIO_PIN_13
|
||||
#define ETH_TXD0_GPIO_Port GPIOG
|
||||
#define ETH_MDC_SAI4_D1_Pin GPIO_PIN_1
|
||||
#define ETH_MDC_SAI4_D1_GPIO_Port GPIOC
|
||||
#define ETH_MDIO_Pin GPIO_PIN_2
|
||||
#define ETH_MDIO_GPIO_Port GPIOA
|
||||
#define ETH_REF_CLK_Pin GPIO_PIN_1
|
||||
#define ETH_REF_CLK_GPIO_Port GPIOA
|
||||
#define ETH_CRS_DV_Pin GPIO_PIN_7
|
||||
#define ETH_CRS_DV_GPIO_Port GPIOA
|
||||
#define ETH_RXD0_Pin GPIO_PIN_4
|
||||
#define ETH_RXD0_GPIO_Port GPIOC
|
||||
#define ETH_RXD1_Pin GPIO_PIN_5
|
||||
#define ETH_RXD1_GPIO_Port GPIOC
|
||||
|
||||
|
||||
/**
|
||||
* Override HAL Eth Init function
|
||||
*/
|
||||
void HAL_ETH_MspInit(ETH_HandleTypeDef *heth)
|
||||
{
|
||||
GPIO_InitTypeDef GPIO_InitStruct;
|
||||
if(heth->Instance == ETH)
|
||||
{
|
||||
/* Disable DCache for STM32H7 family */
|
||||
SCB_DisableDCache();
|
||||
|
||||
/* GPIO Ports Clock Enable */
|
||||
__HAL_RCC_GPIOA_CLK_ENABLE();
|
||||
// __HAL_RCC_GPIOB_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOC_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOG_CLK_ENABLE();
|
||||
// __HAL_RCC_GPIOH_CLK_ENABLE();
|
||||
|
||||
/* Enable Peripheral clock */
|
||||
__HAL_RCC_ETH1MAC_CLK_ENABLE();
|
||||
__HAL_RCC_ETH1TX_CLK_ENABLE();
|
||||
__HAL_RCC_ETH1RX_CLK_ENABLE();
|
||||
|
||||
/**ETH GPIO Configuration
|
||||
PG11 ------> ETH_TX_EN
|
||||
PG12 ------> ETH_TXD1
|
||||
PG13 ------> ETH_TXD0
|
||||
PC1 ------> ETH_MDC
|
||||
PA2 ------> ETH_MDIO
|
||||
PA1 ------> ETH_REF_CLK
|
||||
PA7 ------> ETH_CRS_DV
|
||||
PC4 ------> ETH_RXD0
|
||||
PC5 ------> ETH_RXD1
|
||||
*/
|
||||
GPIO_InitStruct.Pin = ETH_TX_EN_Pin|ETH_TXD1_Pin|ETH_TXD0_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||
GPIO_InitStruct.Alternate = GPIO_AF11_ETH;
|
||||
HAL_GPIO_Init(GPIOG, &GPIO_InitStruct);
|
||||
|
||||
GPIO_InitStruct.Pin = ETH_MDC_SAI4_D1_Pin|ETH_RXD0_Pin|ETH_RXD1_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||
GPIO_InitStruct.Alternate = GPIO_AF11_ETH;
|
||||
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
||||
|
||||
GPIO_InitStruct.Pin = ETH_MDIO_Pin|ETH_REF_CLK_Pin|ETH_CRS_DV_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||
GPIO_InitStruct.Alternate = GPIO_AF11_ETH;
|
||||
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||||
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* Override HAL Eth DeInit function
|
||||
*/
|
||||
void HAL_ETH_MspDeInit(ETH_HandleTypeDef *heth)
|
||||
{
|
||||
if(heth->Instance == ETH)
|
||||
{
|
||||
/* Peripheral clock disable */
|
||||
__HAL_RCC_ETH1MAC_CLK_DISABLE();
|
||||
__HAL_RCC_ETH1TX_CLK_DISABLE();
|
||||
__HAL_RCC_ETH1RX_CLK_DISABLE();
|
||||
|
||||
/**ETH GPIO Configuration
|
||||
PG11 ------> ETH_TX_EN
|
||||
PG12 ------> ETH_TXD1
|
||||
PG13 ------> ETH_TXD0
|
||||
PC1 ------> ETH_MDC
|
||||
PA2 ------> ETH_MDIO
|
||||
PA1 ------> ETH_REF_CLK
|
||||
PA7 ------> ETH_CRS_DV
|
||||
PC4 ------> ETH_RXD0
|
||||
PC5 ------> ETH_RXD1
|
||||
*/
|
||||
HAL_GPIO_DeInit(GPIOG, ETH_TX_EN_Pin|ETH_TXD1_Pin|ETH_TXD0_Pin);
|
||||
|
||||
HAL_GPIO_DeInit(GPIOC, ETH_MDC_SAI4_D1_Pin|ETH_RXD0_Pin|ETH_RXD1_Pin);
|
||||
|
||||
HAL_GPIO_DeInit(GPIOA, ETH_MDIO_Pin|ETH_REF_CLK_Pin|ETH_CRS_DV_Pin);
|
||||
}
|
||||
}
|
||||
|
||||
#endif /* USE_USER_DEFINED_HAL_ETH_MSPINIT */
|
||||
|
|
@ -317,9 +317,7 @@ bool STM32_EMAC::low_level_init_successful()
|
|||
}
|
||||
#else // ETH_IP_VERSION_V2
|
||||
{
|
||||
uint32_t idx, duplex, speed = 0;
|
||||
int32_t PHYLinkState;
|
||||
ETH_MACConfigTypeDef MACConf;
|
||||
uint32_t idx;
|
||||
|
||||
MPU_Config();
|
||||
|
||||
|
|
|
|||
|
|
@ -41,11 +41,25 @@ LR_IROM1 MBED_APP_START MBED_APP_SIZE { ; load region size_region
|
|||
*(InRoot$$Sections)
|
||||
.ANY (+RO)
|
||||
}
|
||||
|
||||
|
||||
RW_IRAM1 (MBED_RAM0_START) (MBED_RAM0_SIZE-Stack_Size) { ; RW data
|
||||
.ANY (+RW +ZI)
|
||||
}
|
||||
|
||||
ARM_LIB_STACK (MBED_RAM0_START+MBED_RAM0_SIZE) EMPTY -Stack_Size { ; stack
|
||||
}
|
||||
|
||||
RW_DMARxDscrTab 0x30040000 0x60 {
|
||||
*(.RxDecripSection)
|
||||
}
|
||||
RW_DMATxDscrTab 0x30040100 0x140 {
|
||||
*(.TxDecripSection)
|
||||
}
|
||||
RW_Rx_Buffb 0x30040400 0x1800 {
|
||||
*(.RxArraySection)
|
||||
}
|
||||
RW_Eth_Ram 0x30044000 0x4000 {
|
||||
*(.ethusbram)
|
||||
}
|
||||
|
||||
}
|
||||
|
|
|
|||
|
|
@ -183,4 +183,19 @@ SECTIONS
|
|||
|
||||
/* Check if data + heap + stack exceeds RAM limit */
|
||||
ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")
|
||||
|
||||
.lwip_sec (NOLOAD) : {
|
||||
. = ABSOLUTE(0x30040000);
|
||||
*(.RxDecripSection)
|
||||
|
||||
. = ABSOLUTE(0x30040100);
|
||||
*(.TxDecripSection)
|
||||
|
||||
. = ABSOLUTE(0x30040400);
|
||||
*(.RxArraySection)
|
||||
|
||||
. = ABSOLUTE(0x30044000);
|
||||
*(.ethusbram)
|
||||
|
||||
} >RAM_D2 AT> FLASH
|
||||
}
|
||||
|
|
|
|||
|
|
@ -37,6 +37,10 @@ define memory mem with size = 4G;
|
|||
define region ROM_region = mem:[from __region_ROM_start__ to __region_ROM_end__];
|
||||
define region RAM_region = mem:[from __region_RAM_start__ to __region_RAM_end__];
|
||||
|
||||
// Memory region used for ethernet
|
||||
define region eth_mem_region = mem:[from 0x30044000 to 0x30048000 ];
|
||||
place in eth_mem_region { section .ethusbram };
|
||||
|
||||
// Stack and Heap
|
||||
define symbol __size_cstack__ = MBED_BOOT_STACK_SIZE;
|
||||
define symbol __size_heap__ = 0x10000; // 64KB
|
||||
|
|
|
|||
Loading…
Reference in New Issue