Set correct SYSMPU register for proper USB operation. This bug was
introduced when the SYSMPU register names and defines were updated
in the commit:
"K64F: Updated the SYSMPU SDK driver"
93f8cfed05
Nanostack object constructor didn't actually initialise Nanostack.
Nanostack initialisation was deferred until an interface was actually
attached to the stack, which generally happened at first interface
connect.
Not normally a problem, unless you're trying to make direct Nanostack
setup calls prior to connect - some applications do this, and were
relying on ThreadInterface::initialise to do Nanostack
initialisation.
Unfortunately in 5.9 ThreadInterface::initialise no longer does
initialise Nanostack immediately, because the mesh interfaces were
aligned and integrated with the Ethernet interfaces, which did
initialisation on connect().
Make the Nanostack object constructor initialise Nanostack (as the LWIP
constructor does for lwIP), so calling Nanostack::get_instance() is the
5.9 API for Nanostack initialisation.
For future work, APIs like ns_file_system_set_root_path should be
exposed as methods of Nanostack, so everything happens with a single
Nanostack::get_instance().file_system_set_root_path().
- set ppp_active false if close fails in ppp disconnect.
- unset sigio in ppp disconnect
- take ownership of filehandle in CellularNetwork::disconnect even in case of failure
A friend class living in the namespace ble::vendor::cordio and named CordioHCITransportDriver can be added in applications requiring access to internal data of the HCI driver and HCI transport driver.
This is meant to be internal and not easily exploitable by application code.
Two cascading copy-paste errors stopped this working:
* PPPCellularInterface::get_gateway() called
nsapi_ppp_get_ip_address();
* nsapi_ppp_get_gateway() called the interface's get_netmask().
First bug has always been there - second one was introduced in 5.9.
AT_CellularNetwork currently lacks calls to get both netmask and gateway
- this patch would be needed for that when added.
Previously get_mac_address on a ThreadInterface returned the EUI-64
reported by the radio driver. This was required for commissioning, but
was inconsistent with other interfaces, and the API concept.
5.9.0 inadvertently changed this so that get_mac_address returned the
actual MAC address used by the radio, which is a hash result of the
EUI-64 for Thread.
The original "return the EUI-64" form was somewhat faulty, as
get_mac_address would not return the EUI-64 set by set_device_eui64() or
another mechanism before connect() was called.
Rather than revert to old behaviour, add a new API to get the device
EUI-64 to ThreadInterface, alongside the existing set API.
When all TX descriptors were reserved in a row so that TX buffer
reclaim interrupt did not happen during reservation sequence, after
the interrupt occurred, TX buffer reclaim did no longer free buffers.
This happened because when all descriptors were in use, last free
index pointed to consumed index.
TX pointer array was using RX ring length in its declaration.
Wasted memory if RX ring > TX ring, as is the default, but would
be broken if RX ring < TX ring.
16 RX buffers and 8 TX buffers is probably excessive. Nanostack
version of driver successfully used 4+4, and data pump should be
broadly equivalent.
This means that switching K64F devices from Nanostack to EMAC increases
base heap usage by 18K - observed in Nanostack border router builds.
Add a config option to make it possible to lower the number of buffers.
Defer consideration of lowering the default to later.
DNS resolver now counts how many sendto operations are successful
during one DNS server attempt cycle (attempting to contact DNS
servers from 0 to last index, including stack specific ones). If all
socket sendto operations fail, DNS resolution is aborted.
If one or more are successful, DNS resolution is continued until
total network attempts count is reached or all sendto operations
fails during a cycle.
1. Move the `mbedtls_platform_context` to be platform code, in `features/mbedtls/platfrom/`.
2. Add static refernce counter, to setup and teardown the platform code only once.
3. Adjust Cryptocell porting accordingly.
If the value is an integer, the 4th bit is used for sign, so you can store
values upto 7 only whereas the datarate values could go upto 15. That's why
we need to turn this to an unsigned integer so that the last bit can also be used.
Travis astyle check pointed out some of the style mismatches in the code.
Not all of them are worth changing as they make the code unreadable and
some of them are semantically wrong.
So in this commit, we have attempted to pick the most important style
mismatches and rectify.
* CENTRAL_LINK_COUNT
* PERIPHERAL_LINK_COUNT
* gatts_enable_params.attr_tab_size
* gatts_enable_params.service_changed
* common_enable_params.vs_uuid_count
These settings control the range of functionality enabled in the softdevice as well as ram consumption.
In particular reducing these values is critical to enable usage of 16K nrf51 devices.
EMAC changes broke PPP glue - fix it up. In particular, PPP steals
the netif->state pointer, so we can't use it as a back pointer to
our LWIP::Interface.
There is a configuration problem with UBLOX_C027 cellular because of missing
LWIP memory configuration for the target.
Added configuration for LPC1768, LPC4088, LPC4088_DM targets and changed
NXP to more specific LPC546XX.
- Set network stack to store event queue so that mbed::mbed_event_queue() call
is not needed every time call_in() is called
- Added dns state variables and enum (states are: created, initiated and cancelled)
- Corrected DNS response handling so that if DNS server returns that host name is
unknown the DNS query is not tried again
- Reorder mutexes in nsapi_dns_query_multiple_async()
- Created nsapi_dns_query_async_initiate_next() function to initiate the next
DNS query from the queue after delete of previous query
- Added dsn_timer_running variable to supervise DNS timer start/stop
- Changed cancel function to only mark query as deleted and moved deletion
to timer function. This allows to run socket close on DNS thread
- Added new nsapi error NSAPI_ERROR_TIMEOUT for DNS (and other) timeouts
General stability improvements are performed.
A flag is added if a Class C RX2 window is open.
We shouldn't open it again if its already opened.
TX_CRYPTO_ERROR is renamed to CRYPTO_ERROR.
Keeping TX_CRYPTO_ERROR for backwards compatibility.
In Class C, rx timeout does not take place for RX2 windows, so if we have
not received anything, we would be retrying but if the no. of retries are
maxed out, and we have not recieved anything yet, we need a mechanism to
tell the upper layer that this has happened.
rx_abort() was sort of dead code as it was doing essentially nothing.
It might have actually meddled with the state machine if it was hit by
invoking on_ack_timeout_timer_event().
State machine and corresponding processors now take care of the ack timeout,
retries and all other bits, so we don't need abort_rx().
MCPS confirmation should be filled with the current number of retries
if the ack is not recieved for a CONFIRMED message.
Ack retry number needs to be incremented after the retry is made not before
that.
A few traces are added at the crucial junctions of the code just to tally with
the conceptual flow for debug purposes.
Application can use cancel_sending() API to stop any outstanding, outgoing
transmission (a TX which is not already queued for transmission). This can
potentially enable use cases where the application could cancel a transmission
and go to sleep if the backoff period is long enough rather than waiting for
the transmission to happen.
This API enables the application to get hold of remaining time after which
the transmission will take place. User can query the backoff time whenever
there is a packet in the TX pipe. If the event for the backoff expiry is
already queued, the stack does not provide backoff metadata.
An API is added to fetch any meta-data available after a succesful
transmission. The stack will make the meta data available after the
TX interrupt is processed. User can get the tx meta data after receiving
TX_DONE event.
Subtract 4 from the received packet length - the buffer contains the
CRC, which we shouldn't pass up.
Ensure we allocate receive buffers of a size corresponding to the
rounded-up size we tell the hardware - the hardware was overrunning the
allocation by a couple of bytes.
- Changed mutexes to platform mutexes
- Removed not needed null check from delete
- Changed nsapi_dns_call_in_set() to use call_in_callback_cb_t and
added prototype to header
- Serialized the sending of multiple async DNS queries since limits on event
message box sizes
- Added timer function that supervises the total time used to make DNS query
and triggers socket timeouts
- Changed nsapi_error_t to new nsapi_value_or_error_t on interface headers
- Corrected wording of gethostbyname_async return values
- Clarified .json options
- Added a new data type for socket callback that can be used from interrupts
- Corrected variable limits to use INT32_MAX etc. defines
- Changed mallocs to new
- Optimized variable sizes on DNS_QUERY definition
- Changed call_in/call methods of the stack to callback provided by the stack
- Specified what are limitations for operations that are made in callback
- Added pure virtual class DNS that defines DNS operations
- Added cancel operation and unique ID to DNS request used in cancel
- Added DNS configuration options to netsocket/mbed_lib.json for retries,
response wait time and cache size
- Changed host name to use dynamic memory in DNS query list and cache,
set maximum length for the name to 255 bytes.
- Added mutex to asynchronous DNS
- Reworked retries: there is now total retry count and a server specific count
- Ignores invalid incoming UDP socket messages (DNS header is not valid), and retries DNS query
- Reworked DNS module asynchronous operation functions
- Corrected other review issues (nothrow new, missing free, missing mutex unlock etc.)
- Added non-blocking DNS interface to network interface and
network stack.
- Added caching of DNS replies.
- Added a network stack function to get DNS addresses from stack.
- Added call and call_in hooks to onboard network stack to
allow calling functions from onboard stack context.
- Added support to call and call_in functions to LWIP and
Nanostack.
- Disabled LWIP DNS translator with the exception of DNS
address storage used in DNS address get.
Implementation of unified EMAC driver for Renesas mbed boards
Based on the driver so far, Renesas implemented the emac driver for GR-PEACH and VK-RZ/A1H.
The mainly changes is below.
- Add the connection part with LWIP according to the unified emac specification.
- Add three new multicast functions(add, remove, set_all).
The Greentea test netsocket and emac test passed.
Just checking "does the chip have an EMAC" doesn't work - there are
targets using those chips which do not have an Ethernet connector and
don't provide the necessary surrounding infrastructure (eg DISCO_F429ZI,
not providing the board emac config call, and HEXIWEAR not providing PHY
info).
Make the targets that actually do want EMAC define their own local
Freescale_EMAC and STM_EMAC labels, and move the drivers into
the corresponding TARGET_ directories, removing the #ifdefs.
Checking DEVICE_EMAC is problematic - particularly for the Odin W2 where
apps have been shutting this off to disable the Wi-fi interface.
Make drivers check a locally-relevant flag instead, pending new
thoughts on how to achieve application/test-relevant flagging for
XXX:get_default_instance() being provided by a system.
However that is achieved, drivers do require a flag set purely by the
target - they mustn't be tripped up by an add-on module providing itself
as the system's default EMAC.
Make Nanostack an OnboardNetworkInterface, implementing
add_ethernet_interface so it can use EMAC drivers.
Can now be used via EthernetInterface, and be the system's default
network stack.
Legacy support for NanostackEthernetInterface retained. Some
restructuring of mesh interface code to fit into the
OnboardNetworkStack:::Interface system.
As we've introduced virtual inheritance to support EMACInterface, we can
no longer use C-style casts or static_cast to downcast from
NetworkInterface to more specific types. RTTI is disabled in the
toolchains, so dynamic_cast is unavailables.
Add virtual downcast methods to permit conversions to the 6 derived
classes. Probably only needed for EMACInterface, WiFiInterface and
EthInterface, but handles the set.
The soft device is not consistent as it is required to force the connection to a resolved resolvable address so it should be known if the target is an identity address.
ns_event_loop_thread_start() is incorrectly used at connect() phase, the initial
setup is already done at init() phase and the eventloop thread is correctly initialized.
Also, the usage of ns_event_loop_thread_start() API should be behind MBED_CONF_NANOSTACK_HAL_EVENT_LOOP_DISPATCH_FROM_APPLICATION
flag as application can decide to use main thread for event loop, which will result in linker error for this API call in
case of ARMCC compiler.
This has been superceded by CellularBase. Name change occurred late
in review of https://github.com/ARMmbed/mbed-os/pull/4119 and
original unused CellularInterface was left behind.
Rather than let "EthernetInterface" be the base EMAC NetworkInterface,
insert an "EMACInterface" class.
EthernetInterface then derives from EMACInterface and EthInterface.
A Wi-Fi driver can derive from EMACInterface and WiFiInterface - this
will be more logical than deriving from EthernetInterface and
WiFiInterface.
This does mean adding a couple of virtual inheritances to avoid
duplicate NetworkInterfaces:
NetworkInterface
/ \
virtual / \ virtual
/ \
EMACInterface WiFiInterface
\ /
\ /
\ /
MyCustomWiFiInterface
Initial work by Bartek Szatkowski in https://github.com/ARMmbed/mbed-os/pull/4079,
reworked following review of https://github.com/ARMmbed/mbed-os/pull/5202 to
transform the entire system into C++, retaining the basic functionality.
Bartek's summary:
* Porting ethernet to EMAC
* Updating EMAC to enable multiple interfaces
* Untangling networking classes, making the abstractions a bit clearer to follow, etc
* General refactoring
* Removal of DEVICE_EMAC flag and introducing DEVICE_ETH and DEVICE_WIFI
Revisions since initial branch:
* Remove lwip depencies
* Correct doxygen warnings
* Remove emac_api.h, replace with C++ EMAC abstract class.
* Create OnboardNetworkInterface, and LWIP implementation.
* Mappings since #4079
lwip-interface/nsapi_stack_lwip.c -> LWIPStack.cpp
lwip-interface/ipstack_lwip.c -> LWIPInterface.cpp
netsocket/mbed_ipstack.h -> OnboardNetworkStack.h
hal/emac_api.h -> EMAC.h
* Reinstate use of EthInterface abstraction
* Correct and clarify HW address EMAC ops
* Restore MBED_MAC_ADDR implementation
* Integrate PPP support with LWIP::Interface.
* Convert K64F lwIP driver to K64F_EMAC.
To do:
* Convert emac_stack_mem.h to follow this pattern.
* Figure out DEVICE_ETH/EMAC
* Update all drivers to use EMAC
The overload of Gap::connect that accept peer_address_t has been added and gap connection and advertising report process have been updated to exploit peer_address_t in a backward compatible fashion.
Deprecation:
* Gap::AdvertisementCallback::addressType has been deprecated in favor of Gap::AdvertisementCallback::peerAddrType.
* Gap::ConnectionCallbackParams::peerAddrType has been deprecated in favor of Gap::ConnectionCallbackParams::peerAddressType.
* Gap::ConnectionCallbackParams::ownAddr has been deprecated in favor of nothing else as this information may be not available.
Overloads added to accept a peer_address_t:
* Gap::connect
* Gap::processConnectionEvent
* Gap::processAdvertisingReport
As this include is not actually needed. Having it will cause issues
with the bootloader, as this will cause a need to get the full
CMSIS/RTOS package etc., which would bloat the bootloader size.
The changes made to BLEProtocol::AddressType was not entirelly backward compatible as BLEProtocol::AddressType split random addresses in three category while the type RANDOM is a superset of these types.
If new events are signaled during processing then they should be processed when processEvent is called again. The goal is to let other processing happen and not process sollely ble events.
This change has been forced by a change in latest softdevice that requires all key pointers to not be NULL unlike what is indicated in the documentation.
Previously EBAD (invalid exchange), mapping the error CORRUPT to EILSEQ
(illegal byte sequence) makes more sense as a description of the type of
error.
Add the allocate_key API. This replaces the previously added set_alloc_key API
(which allocates a key and sets the value at the same time).
Reason for the change: Key allocation will typically be used by other storage
features (like StorageLite), keeping the allocated keys in another location.
Previous API created problems in the case key allocation and value setting
couldn't be done at the same time (for instance, if the set value was
derived from the allocated key, such as hash or CMAC).
Right now, many users are trying out many different filesystems.
Unfortunately, this can leave partially written filesystems on disk
in various states.
A very common pattern for using embedded filesystems is to attempt
a mount, and on failure, format the storage with the filesystem.
Unfortunately, this simply doesn't work if you try to change the
filesystem being used on a piece of storage. Filesystems don't always
use the same regions of storage, and can leave enough metadata lying
around from old filesystems to trick a different mount into thinking a
valid filesystem exists on disk. The filesystems we have were never
designed to check for malicious modification and can't protect against
arbitrary changes.
That being said, it's caused enough problems for users, so as a
workaround this patch adds a disk erase to the FAT filesystem format.
The most common error happens when you use LittleFS, followed by FAT,
followed again by LittleFS.
No other combination of filesystem usage has shown a similar failure,
but it is possible after extensive filesystem use, so it is still
suggested to force a format of the storage when changing filesystems.
In the reception data path, we needed to check the MCPS CONFIRMATION type
not the MCPS INDICATION type. Indication message type is for downlink message type
which can be UNCONFIRMED even if we have sent a CONFIRMED one, e.g., an ACK.
Add support for Alternative ECDSA and ECDH, on the higher level,
over CC310. Note that CC generates ECC keys according to FIPS 186,
while mbed TLS generates according to RFC 6979 and RFC 4754,
which causes test vectors for curve p521 to fail
Fixes error: IOTCLT-2506 [GitHub] Cannot set registration time if server does not use max age option
Improvements; Extend blockwise message transfer status to have states for sending as well.
NOTE! These are internal changes required for cloud client. This has no direct relevance to any mbed-os functionality.
Our config file for lwIP had TCP_QUEUE_OOSEQ disabled - this can
cause significant performance problems, as observed during testing.
One lost packet can lock an input stream into a mode where the
transmitter keeps thinking packets are being lost, so keeps slowing
down. This caused test failures - a transfer that would normally
take 10s hit a 60s timeout.
Turning this on increases code size, but doesn't significantly increase
static memory use. The memory used for out-of-order packets comes from
the same pbuf pool as for outgoing TCP segments, so there is contention
when running bidirectionally.
Out-of-order processing is on by default for lwIP - this seems to be
another example of us excessively paring it back.
Application can give battery_level callback method what Lora stack
uses to query battery level for DevStatusReq MAC command response.
The problem was that this callback was never called.
This commit fixes this problem and if application does not set
battery_level callback at all, value 255 (= The end-device was not able to
measure the battery level.) will be returned to lora gateway.
The unified NRF51 target and feature BLE directories have been
reorganized to follow the naming and directory structure of the
NRF52 implementation.
This reorganization does not include TARGET_MCU_NRF51822 and
derived targets.
If the frame length is not what we are expecting, it is
found to be a good practise to actually continue with what we
have received rather than aborting. As we have already demodulated
the packet and RX slots are used up, ther is not so much benefit in
dropping that packet.
While configuring RX parameters for the radio, we need to feed in
rx windows 1 and 2 parameters which are computed when we do the transmission.
We are actually setting the physical value of the data rate rather than
data rate table index and the expectation was to set the data rate index.
The asia pacific region supports custom channel planning and
downlink channel request. By virtue of a mistake, this information
was missing and hence a custom channel support was not working.
Fixes issue #6783.
There had been essentially two state machines running in our stack
which was too cumbersome and was not alligned in any symmetry.
In this work we make sure that:
* There are no callbacks from the MAC layer to Stack controller layer.
* Primitives are made local to the mac layer and are presented as
read-only to the stack controller layer.
* Interrupt handling and processing is moved to the stack controller layer.
* Reception is divided into smaller units, seperating handling of Join Accept
and normal data frames. MIC gets its own unit.
* Extraction of data and MAC commands from the payload is also being done now in
its own method.
* To ensure integrity of the stack, and sanctity of the radio payload, we copy the
radio payload buffer immediately in the rx interrupt and hoist a flag that prevents
another interrupt from happening for a short while when we are processing the previous
packet.
* If an automatic uplink is on going, we do not send a TX_DONE event to application
anymore as that is logically incorrect.
* state_controller() is the central engine for the state machine. To save code space and
memory, we are not handling each and every state in the state_controller(). Some of the states
which have no processing to be done, are explicitely set.
* For all the states who need special processing, seperate methods are added.
* Class A always run to completion to IDLE and CLass C always runs to completion as RECEIVING.
Making our LoRaWAN stack thread safe. If RTOS is not present, locks
don't do anything. ScopedLock is used to automate the lock release on
context expiry.
We went through an exercise of adding band information to
any new channel being added. Default channels were looked over.
This commits duly adds missing band information to default channels.
The procedure should be terminated whenever the server returns an error not equal
to ATTRIBUTE_NOT_FOUND. The block was effectivelly terminated but the
procedure was not. As a result the discovery was operating on already
freed memory.
If Lora stack is built with incorrect mbedtls settings, crypto methods
should assert and return error value. This fixes MBED_ASSERTs to
work correctly.
Now application can call connect and disconnect multiple times and resources are freed and constructed properly.
Also whole easycellular can be deleted and constructed again.
This patch refines permission applied to characteristic and descriptors; instead of a single level of permission , each characteristic receives a permission for the read operation, one for the write operation and another one for the update operation.
As a consequence, updates are not sent if the link does not cover the update permission requirement.
Descriptors also benefits individually from read and write permission.
The registration process has been breaked down into several functions that register the service attribute, characteristic declaration attributes, characteristic value attributes and characteristic descriptors.
Service registration now consider all characteristics permissions: read, write and update. Permissions are also considered when updates needs to be propagated to peers.
Handling of user authorization is also a change introduced by this refactoring.
A peripheral can act as a GATT client whether it is in the peripheral role or the central role therefore it doesn't make sense to enable signing only if roles will be reversed latter.
If the the upper layer has registered a peer csrk on the pal security manager then it must remove it once the connection is closed.
This API allows the upper layer to remove the peer csrk registered earlier.
A peer may not share a valid IRK and identity address during pairing (in that case the identity address received is all zeros). When this happens, the entry must be retrieved by looking at the address used by the peer during the connection.
Paths such as the following were causing issues:
/tea/hottea/.
/tea/hottea/..
Unfortunately the existing structure for path lookup didn't make it very
easy to introduce proper handling in this case without duplicating the
entire skip logic for paths. So the lfs_dir_find function had to be
restructured a bit.
One odd side-effect of this is that now lfs_dir_find includes the
initial fetch operation. This kinda breaks the fetch -> op pattern of
the dir functions, but does come with a nice code size reduction.
Nanostack related files moved under 'feature/nanostack'
Common libraries moved to 'features/frameworks'
Allow FEATURE_COMMON_PAL still to be defined in the build so
that we don't break any builds.
This patch adds independent management of security requirement for read, write and update operatiosn of a GattCharacteristic.
Requirements are defined after ble::att_security_requirement_t that maps LE security mode 1 and LE security mode 2.
The functions requireSecurity and getRequiredSecurity are deprecated as SecurityManager::ScurityMode_t does not map well with LE security modes.
band_t structure in phy parameters was not being filled in properly
and we were spilling over the array boundary for bands.
In addition to that two utility functions are added to perform safety
checking taking in the frequency and filling out band information plus
boundry value checks.
In LoRa TX power value 0 means the maximum allowed TX power and values >0
are limiting the allowed TX power to lower.
tx_config was incorrectly checking the power level and causing the maximum
TX power to be always used. Lora gateway can request node to use lower TX
power with LinkAdrReq MAC command.
In order to have smaller and better testable methods, instead of having a big
switch-case -style add_mac_command(), each MAC command is now separated to an
own method.
* Updates driver library to v2.3.1 (2018q1) for bugfixes and convenience functions
* Provides library in correct format (2-byte wchar_t flag) for compiling with ARMCC (#6695 uncovered by #6577)
* Reverts to using a statically-allocated packet buffer since malloc is not thread-safe (and the asserts have been turned on)
* Add NRF_SD_BLE_API_VERSION=5 macro to MCU_NRF52832 target
* Added initial Softdevice v5 API support for nRF5XPalGattClient.cpp
* Added initial Softdevice v5 API support for nRF5xGap.h
* Added initial Softdevice v5 API support for nRF5xGattServer.cpp
* Make sure the ah() hash function used by the security manager is declared with C linkage
* Removed 'ARM porting pending' checks in Nordic SDK
* Added BLE configuration to mbed_lib.json for NRF52x targets
* Migrated APIs and events model for Nordic SDK14.2 & SD API v5 in btle.cpp; adopted polling dispatch model
* Migrated APIs and events model for Nordic SDK14.2 & SD API v5 in nRF5xn.cpp
* Migrated APIs and events model for Nordic SDK14.2 & SD API v5 in nRF5xGap.cpp
* Added const qualifier to hwCallbacks's p_ble_evt parameter in nRF5xGattServer
* Add workaround to enable Radio Notification module from Nordic SDK
* Disabled SWI1 interrupt manually from SWI driver module
* Added missing include directive for "nrf_nvic.h" in ble_radio_notification.c
* Set correct number of custom UUIDs
* Adjust Softdevice RAM requirements for NRF52832/S132
* RAM settings for the application were adjusted as follow:
* Start: 0x20003800
* Size: 0xC800
* Adjust Softdevice RAM requirements for NRF52840/S140
* RAM settings for the application were adjusted as follow:
* Start: 0x20003700 (was 0x20003000)
* Size: 0xC900
* Added 3dBm as a permitted TX Power value for NRF52832
* Fix address type recovery in GAP
* Return min non-connectable adv interval compatible with infrastrcture's expectations
* Moved BLE driver from TARGET_SDK_14_2/FEATURE_BLE to TARGET_SDK_14_2/TARGET_SOFTDEVICE_COMMON/ble
Currently lora stack will automatically send an empty uplink message to lora gateway in case of:
- Node received message with pending bit set.
- Node received MAC command which requires instant response (sticky MAC command)
- Node received confirmed message in class C mode
This commit makes this configurable via config item
"automatic-uplink-message": {
"help": "In case of pending bit, class c confirmed message or sticky MAC command, stack will automatically send empty uplink message",
"value": true
}
Default value is true. If sending an empty message fails, stack will send event AUTOMATIC_UPLINK_ERROR application.
If automatic uplink sending is disabled, stack will send application UPLINK_REQUIRED -event to indicate
application should issue a new uplink to gateway as soon as possible.
The DB entry lookup now looks at the identity address and/or connection address to find a DB entry associated to an address.
If the entry has not been found in the DB and a new entry is returned then the connection address is not stored for private addresses.
lwIP was using us_ticker unnecessarily, complicating the code and
potentially causing grief with power saving, and possible glitches
on timer wrap. Switch it to use the RTOS tick count.
Compiler reminded that a variable declaration was left behind when
the code using it was put behind #ifdef. Add the missing #ifdef.
Warning being fixed:
---8<---8<----
[Warning] ns_event_loop.c@44,0: #177-D: variable "event_thread_id"
was declared but never referenced
nanostack-hal.critical-section-usable-from-interrupt -tunable was
previously added to optionally make critical section code interrupt safe.
The IRQ safe critical section is a prequisite for interrupt safe timer
callbacks.
The same flag can be used to enable calling of the timer callbacks
directly from the timer interrupt context, without bouncing them via
event thread. This removes the code and RAM consumed by EventQueue
and the thread serving the high priority events.
If the system does not have any dependencies on mbed_shared_queues,
by setting this flag the static RAM usage is now further reduced
by ~1600 bytes and code size by 4KB.
Note: the default behavior is not changed, one needs to override the
"nanostack-hal.critical-section-usable-from-interrupt" to have "true".
Any data structure used in LoRaWANBase class should be available
in a separate header in order to make the code easy to port and
easy to read as the developer doesn't need to know about all the
internal data structures being used in Mbed LoRaWAN stack.
Compile: lwip_stack.c
In file included from ../features/FEATURE_LWIP/lwip-interface/lwip_stack.c:41:0:
../features/FEATURE_LWIP/lwip-interface/lwip_stack.c: In function 'mbed_lwip_bringup_2':
../features/FEATURE_LWIP/lwip-interface/ppp_lwip.h:58:44: warning: statement with no effect [-Wunused-value]
#define ppp_lwip_disconnect() ERR_IF
^
../features/FEATURE_LWIP/lwip-interface/lwip_stack.c:858:21: note: in expansion of macro 'ppp_lwip_disconnect'
ppp_lwip_disconnect();
^~~~~~~~~~~~~~~~~~~
../features/FEATURE_LWIP/lwip-interface/ppp_lwip.h:58:44: warning: statement with no effect [-Wunused-value]
#define ppp_lwip_disconnect() ERR_IF
^
../features/FEATURE_LWIP/lwip-interface/lwip_stack.c:875:21: note: in expansion of macro 'ppp_lwip_disconnect'
ppp_lwip_disconnect();
^~~~~~~~~~~~~~~~~~~
Contains one error fix:
IOTCLT-2469 CoAP UDP retransmission does not work for blocks after first one for requests (Eg. registration POST)
NOTE! These are internal changes required for cloud client. This has no direct relevance to any mbed-os functionality.
As pointed out by davidefer, the lookahead pointer modular arithmetic
does not work around integer overflow when the pointer size is not a
multiple of the block count.
To avoid overflow problems, the easy solution is to stop trying to
work around integer overflows and keep the lookahead offset inside the
block device. To make this work, the ack was modified into a resetable
counter that is decremented every block allocation.
As a plus, quite a bit of the allocation logic ended up simplified.
One of the big simplifications in littlefs's implementation is the
complete lack of tracking free blocks, allowing operations to simply
drop blocks that are no longer in use.
However, this means the lookahead buffer can easily contain outdated
blocks that were previously deleted. This is usually fine, as littlefs
will rescan the storage if it can't find a free block in the lookahead
buffer, but after changes that caused littlefs to more conservatively
respect the alloc acks (e611cf5), any scanned blocks after an ack would
be incorrectly trusted.
The fix is to eagerly scan ahead in the lookahead when we allocate so
that alloc acks are better able to discredit old lookahead blocks. Since
usually alloc acks are tightly coupled to allocations of one or two blocks,
this allows littlefs to properly rescan every set of allocations.
This may still be a concern if there is a long series of worn out
blocks, but in the worst case littlefs will conservatively avoid using
blocks it's not sure about.
Found by davidefer
This commit adds API to enable and configure the device privacy.
It deprecates address random types present in Gap::AddressType as these types are not appropriate for scan reports, connection initiation and the connection event. Now user should use the function Gap::getRandomAddressType to find the type of a random address.
The function gap::setAddress is deprecated as it is not portable and can colide with privacy.
Bug was reported by @tpet93 and it was correctly diagnosed that channels
were not being set in the phy_params structure. This commit fixes the bug
and sets up channels correctly.
This is a fix for issue #6389.
Currently when application receives RX_DONE event from stack, it has to provide the correct port
value to receive method in order to read the received message. The problem is that current
API does not provide any way to know in to which port message was received.
This commit introduces a new receive() method, which instead of checking these values, will return
them to application.
With this change, it is possible to encode the size of the array viewed by an ArrayView into the type itself: ArrayView<T, Size>. Such objects are lighter than ArrayView of arbitrary size and allows verification of the size at compile time.
This change also fix operator== and bring new make_ArrayView overloads.
- Fixes error: IOTCLT-2539 Block wise messaging call-backs not working logically
- Allow TCP+TLS transport method to send larger messages without blockwising.
NOTE! These are internal changes required for cloud client. This has no direct relevance to any mbed-os functionality.
Fix compilation of compilance test and at the same time refactor compliance
test handler. Renamed mcps_request as test_request as it is only used for
compliance test. Also fixed a bug with null buffer in send_compliance_test_frame_to_mac.
Glue code was inspecting lwIP's netconn "type", checking directly for
NETCONN_UDP and NETCONN_TCP.
Unfortunately the type byte has some flag bits like
"IPv6", which means the tests fail if it's an IPv6 socket. So, for
example, TCP socket options were rejected for IPv6.
Add the necessary NETCONNTYPE_GROUP macros to fix this.
- This is internal change, no functionality has been changed
- LoRaWanInterface cleaned up and code moved to LoRaMacStack
- Compliance code in LoRaMacStack moved to EOF
- Green tea tests have been run manually
- Doxygen updated accordingly
LoRA: reorder class members
This API can be used to runtime change device class.
Please note that only class A and C are supported at the moment.
Trying to set class B will return LORAWAN_STATUS_UNSUPPORTED.
Fix set_device_class documentation
fix documentation
Cruz Monrreal
Ari Parkkila
Yoshihiro TSUBOI
Amanda Butler
Russ Butler
Kevin Bracey
Teppo Järvelin
Martin Kojtal
paul-szczepanek-arm
David Saada
Vincent Coubard
Krzysztof Stachowiak
Michael Schwarcz
Mika Leppänen
Teemu Kultala
Anna Bridge
Ron Eldor
Yossi Levy
Joris Aerts
Kimmo Vaisanen
Hasnain Virk
Antti Yli-Tokola
Andrew Leech
Donatien Garnier
Oren Cohen
Oren Cohen
Veijo Pesonen
Mirela Chirica
Bartek Szatkowski
Kari Haapalehto
Seppo Takalo
Danny Shavit
Senthil Ramakrishnan
Asif Rizwan
Mahesh Mahadevan
TomoYamanaka
cyliangtw
Yogesh Pande
jeromecoutant
Christopher Haster
Janne Kiiskila
Juhani Puurula
Qinghao Shi
Krzysztof Stachowiak
Steven Cartmell
Marcus Chang
Brendan McDonnell
Steven Cooreman
Paul Thompson
Tero Jääskö
ccli8
Antti Kauppila
Max Payne
Jimmy Brisson
Bilal
Cruz Monrreal
mudassar-ublox
Martin Kojtal