Added CAN API support for NUCLEO_L476RG target.
"stm32l476xx.h" file was changed to avoid compilation errors.
Change-Id: Ifadf7048f6c72c0311ec915e47ce2190460ede68
Added CAN API support for DISCO_L476VG target.
*stm32l476xx.h* file was changed to avoid compilation errors.
NOTE: MBED_29 or MBED_30 cannot be tested on this platform because CAN pins are
soldered to USB, GYRO and others.
Change-Id: I2e85bd36dc45872b1ab617f072de98164f2c96f8
We're ensuring target and host start-up sync here in 2 ways:
1) adding a delay on host side to make sure the serial
initialization can happen before sending a character is sent to target
2) in case of serial_nc_rx_auto.py test, we're sending a
first character S which will trigger the move from rx+tx
to NC+rx.
This should avoid any crossing case due to HSOT being faster than target or vice-versa
During initialization phase of the 2 NC serial tests,
there is a character being sent from host to target,
based on MBED_HOSTTEST_START. The problem is that
the target firmware then creates a "new" serial on the
same serial interface. the new or should, or at least may,
induce a reset of the IP, so that the character sent by host
would be lost. So we're moving the new earlier.
the real testing part happens later, to check the next
character is not received or sent.
Added CAN API support for NUCLEO_F302R8 target.
*stm32f302x8.h* file was changed to avoid compilation errors.
Change-Id: Ia4ee8a90fe3f0ad6955dde21e78ea4a6c05e4fcd
Added CAN API support for NUCLEO_F303K8 target.
*stm32f303x8.h* file was changed to avoid compilation errors.
Change-Id: If093c84f19c5a5ef68938af4653a25271c1108ba
Added CAN API support for NUCLEO_F303RE target.
*stm32f303xe.h* file was changed to avoid compilation errors.
Change-Id: Ia6519c982261d43165dbce73cab7cfc0617474e2
Added CAN API support for NUCLEO_F334R8 target.
*stm32f334x8.h* file was changed to avoid compilation errors.
Change-Id: Ic7b3273ffe24940ecdc189d2566a6a7f66825ce6
Added CAN API support for NUCLEO_F042K6 target.
"stm32f042x6.h" file was changed to avoid compilation errors.
Change-Id: I9622a233775fc6834201a322740bf5026244d50e
Added CAN API support for NUCLEO_F072RB target.
*stm32f072xb.h* file was changed to avoid compilation errors.
Change-Id: I9da75fde29fd19f0326d554acc1dbb5386b08317
Added CAN API suport for NUCLEO_F091RC target.
*stm32f091xc.h* file was changed to avoid compilation errors.
Change-Id: I9207575a0e2ad0f8e3a4bb78eb23d1e7b4a94171
* * Base Commit for SAMG55J19. No errors and no implementations.
* * Added gpio files.
* * Added pinmap files.
* * Base commit for usticker implementation.
* * Added gcc_arm export functionality
* * added files for usticker.
* added template file for samd55j19
* * GPIO IRQ base commit.
* * updated with changes in gpio irq driver.
* * Reverted back unexpected commit in SAM0 gpio driver.
* * updated gpio_irq driver.
* * correction in gpio and gpio_irq drivers.
* added support for some test for gpio.
* * base commit for peripheralpins for usart.
* update in serial apis.
* * updated serial apis.
* * updated serial apis and test.
* * update serial apis for asynch apis.
* * updated peripheral pins for i2c and spi.
* added test support for serial flow control
* * Base commit for low power ticker implementation.
* * base commit for port apis.
* update in lp ticker apis.
* * Added test support for port.
* * base commit for sleep apis.
* * Base commit for spi.
* * updated with corrections in gpio irq.
* usticker file updated with latest source.
* * updated with corrections for unexpected board reset.
* updated gpio irq apis and added test for the same.
* * updated sleep api for deepsleep.
* * updated serial apis.
* Added uc_ticker and SPI api implementations
* Removed unused SPI pin map
* Updated review feedback
* * implemented lpticker with TC module.
* updated files for KnR Coding Statndard.
* updated serial and usticker apis.
* * Base commit for AnalogueIn apis.
* * RTC apis base commit without implementation.
* * Updated with corrections in lpticker implementations.
* * Added implementation for rtc apis.
* * updated with implementations for pwm.
* changed usticker from TC0 to TC1.
* Added I2C support
* * removed setvector usage from usticker and lpticker implementations
* added tests for SAMG55J19
* * Removed unwanted .o and .d files.
* Updated I2C files for KnR Coding Standards.
* Update for reducing compiler warnings in peripheralpins,c
* Updated with PWM free implementation.
* * Removed unwanted headers file inclusion.
* Compiler warning corrections in serial_api.c
* * Updated ADC with 16 bit mode initialization and code refinements.
* Updated PWM with code refinements.
* Updated I2C review feedback and fixed style
* Updated target name for SAMG55
* * Added Test Support for I2C with AT30TSE75X and Added Support for SAMG55J19 in atmelstudio project exporter
* * Added Test Support for I2C with AT30TSE75X and Added Support for SAMG55J19 in atmelstudio project exporter
* Used NVIC_SetVector for interrupt callback
* Removed Target macro define in test
* Updated test cases to have SAMG55 support
* * Updated with corrections in Serial and SPI asynchronous implementations.
* Updated deepsleep api implementation
* Merged LP_Ticker with latest code from mbed 3.0 repository.
* * updated with corrections in I2C Asynch implementation.
Initial version that can be built is based on STM32F411RE target which is compatible with F410.
TODOs: MCU specific modifications in CMSIS/HAL like memory sizes/map, peripherals, clocks, etc.
Initial version that can be built is based on STM32F411RE target which is compatible with F410.
TODOs: MCU specific modifications in CMSIS/HAL like memory sizes/map, peripherals, clocks, etc.
Martin Kojtal
Vincent Coubard
Bartosz Szczepanski
Laurent Meunier
Steven Cooreman
Sam Grove
bcostm
Mahadevan Mahesh
mbedNoobNinja
svastm
mtkrtk
Parthasarathy
Brian Daniels
adustm
Aksel Skauge Mellbye
Wojciech Gorniak
Mika Laurila
Rafal Fabich
dbestm
akhilpanayam
vimalrajr
Pawel Rozanski
bcostm