5994b1e108
MTB_UBLOX_ODIN_W2: Reenable lp-ticker and BLE
...
Make an exception for this target and enable lp-ticker when LSE is not available.
This exception is added because of with disabled lp-ticker (and BLE feature) we have the following linker error with ARM compiler:
[Error] @0,0: L6218E: Undefined symbol hciCmdAlloc (referred from BUILD/tests/MTB_UBLOX_ODIN_W2/ARM/targets/TARGET_STM/TARGET_STM32F4/TARGET_STM32F439xI/TARGET_MODULE_UBLOX_ODIN_W2/sdk/TOOLCHAIN_ARM/libublox-odin-w2-driver.ar(hci_vendor_cmd.o)).
[Error] @0,0: L6218E: Undefined symbol hciCmdSend (referred from BUILD/tests/MTB_UBLOX_ODIN_W2/ARM/targets/TARGET_STM/TARGET_STM32F4/TARGET_STM32F439xI/TARGET_MODULE_UBLOX_ODIN_W2/sdk/TOOLCHAIN_ARM/libublox-odin-w2-driver.ar(hci_vendor_cmd.o)).
It looks like the folloiwng library must be updated:
targets/TARGET_STM/TARGET_STM32F4/TARGET_STM32F439xI/TARGET_MODULE_UBLOX_ODIN_W2/sdk/TOOLCHAIN_ARM/libublox-odin-w2-driver.ar
2020-01-20 09:49:48 +01:00
d9008cc205
Disabled BLE feature for targets without lp-ticker
2020-01-20 09:04:46 +01:00
68468653be
Enable lp-ticker based on LSE for ublox C030 family.
2020-01-20 09:04:46 +01:00
cc49560b63
Disable lp-ticker for STM targets which uses RTC/LSI for lp-ticker
...
According to the documentation of STM32F437VG76 MCU:
The LSI RC acts as an low-power clock source that can be kept running in Stop and
Standby mode for the independent watchdog (IWDG) and Auto-wakeup unit (AWU). The
clock frequency is around 32 kHz. For more details, refer to the electrical characteristics
section of the datasheets.
It seems that typical LSI frequency is 32 kHz, but it may vary from 17 to 47 kHz!
This means that lp-timer test may fail on the same board because lp-ticker frequency is unstable.
2020-01-20 09:04:45 +01:00
860ccdec5e
EFM32: add UART and LEUART for EFM32GG11
...
- adds the missing PinMap definitions for UART0, UART1, LEUART0 and LEUART1
- corrects a misplaced `#endif` for `#if DEVICE_SPI` which included `UART_TX`
- all according to https://www.silabs.com/documents/public/data-sheets/efm32gg11-datasheet.pdf
2020-01-18 14:10:22 +01:00
8a0fdd24d9
Rename "default_lib" to "c_lib".
2020-01-17 08:05:48 -08:00
3dbf780322
Merge pull request #12253 from VeijoPesonen/remove_depr_storage_abstraction
...
storage_abstraction: deprecated since Mbed OS 5.5 and now removed
2020-01-17 14:02:45 +00:00
0266a95fb6
Merge pull request #12223 from d-kato/rza1xx_bootloader_support
...
RZ_A1H and GR_LYCHEE: Enable bootloader support
2020-01-17 13:53:36 +00:00
b7c961c4ac
Merge pull request #12220 from hugueskamba/hk-replace-uartserial-nordic
...
NRF5x targets: Replace UARTSerial references with BufferedSerial
2020-01-17 09:59:56 +00:00
6b5cbff743
Merge pull request #12209 from hugueskamba/hk-replace-uartserial-nxp
...
NXP target: Replace UARTSerial references with BufferedSerial
2020-01-17 08:43:57 +00:00
d6e69ef57b
Merge pull request #12208 from hugueskamba/hk-replace-uartserial-st
...
ST targets: Replace UARTSerial references with BufferedSerial
2020-01-17 08:19:09 +00:00
31988d85fe
Merge pull request #12139 from fkjagodzinski/hal-reset_reason-get_capabilities
...
HAL: Add a get_capabilities() function to ResetReason API
2020-01-16 14:44:31 +00:00
22042e5349
Merge pull request #12241 from OpenNuvoton/nuvoton_m2351_npsa_secure-minimal-build
...
M2351: Remove LPTICKER to spare memory for non-PSA minimal secure build
2020-01-16 09:42:44 +00:00
77fa743740
Merge pull request #12245 from JanneKiiskila/target_upd_NUCLEO_WB55RG
...
NUCLEO_WB55RG - add device name "STM32WB55RGVx"
2020-01-16 09:00:30 +00:00
c27e644b96
Merge pull request #12240 from yarbcy/pr/add-new-tests-softap-2
...
Cypress: Initial commit of SoftAP host tests
2020-01-16 08:36:47 +00:00
359d41adef
M2351: Remove LPTICKER to spare memory for non-PSA minimal secure build
2020-01-16 09:58:32 +08:00
fabd02d1f6
Enable bootloader for NUCLEO_WB55RG
...
That's whole reason we wanted to start the changes... Bootloader is
supported.
2020-01-15 14:09:09 +02:00
7517d95ab6
NUCLEO_WB55RG - add device name "STM32WB55RGVx"
...
Bootloader compilation will require the device to be in place,
it uses that to pick up the CMSIS-pack info from the index.json.
2020-01-15 14:08:32 +02:00
4c4ed0ab78
Merge pull request #12258 from trowbridgec/disable-ep_agora-cell-aux-uart-by-default
...
Disable the cell AUX UART by default on EP_AGORA
2020-01-15 13:07:28 +01:00
88f48d240e
Merge pull request #12237 from mprse/stm_serial_free_fix
...
STM serial free: Set pin function only if pin is defined (not NC)
2020-01-15 13:02:20 +01:00
1a58d07c04
Merge pull request #12199 from ARMmbed/targets-json-format
...
Format targets.json
2020-01-15 13:00:26 +01:00
978a9665f0
Merge pull request #12201 from jeromecoutant/PR_G0REFACTOR
...
TARGET_STM: FW driver files refactor proposition
2020-01-15 12:59:49 +01:00
cbca99d38f
Merge pull request #12160 from AGlass0fMilk/fix-prs-config
...
nRF52: Properly configure nRF SDK for nRF52-series targets
2020-01-15 12:58:32 +01:00
a21a0062af
Disable the cell AUX UART by default on EP_AGORA
2020-01-14 12:55:16 -05:00
117201d77d
"Update secure binaries for NU_PFM_M2351_S (ARMC6)"
2020-01-14 14:27:54 +00:00
c9c5b78ca3
"Update secure binaries for ARM_MUSCA_A1_S (ARMC6)"
2020-01-14 14:27:54 +00:00
2f07ad471b
"Update secure binaries for LPC55S69_S (ARMC6)"
2020-01-14 13:54:48 +00:00
d0d9338066
K64F: removes a deprecated storage driver
...
The API was deprecated since Mbed OS 5.5 and has been removed.
2020-01-14 13:15:58 +02:00
b72d0be687
Add sector information
2020-01-14 11:10:30 +09:00
c53d2f1198
Addressed comments
2020-01-13 14:46:32 +02:00
3425b8e1fc
Cypress: Initial commit of SoftAP host tests
2020-01-10 19:58:40 +02:00
d8fbfbfeb4
Replace macro "UART1_ENABLED" with corresponding "NRFX_UARTE1_ENABLED".
2020-01-10 11:33:11 -05:00
dd98d0102f
Update SDK config for nRF52840 to disable UART1 instance (Mbed serial port uses UARTE peripheral)
2020-01-10 11:32:47 -05:00
8a938ea777
STM serial free: Set pin function only if pin is defined (not NC)
2020-01-10 14:59:28 +01:00
dc19460fa3
Remove use of deprecated UART driver (as opposed to UARTE). Disable unused TWIM peripheral (deprecated TWI peripheral is currently used for I2C master mode operation).
2020-01-09 16:35:06 -05:00
b6befee4cf
Properly configure PRS API so it actually delegates the shared interrupt slot to the appropriate peripheral
2020-01-09 16:35:06 -05:00
759ce271c2
Merge pull request #12200 from MultiTechSystems/fix_PeripheralPins
...
Minor fixes for peripheral pins on Dragonfly Nano
2020-01-09 13:17:01 +01:00
dbb0695311
Merge pull request #12202 from LMESTM/Increase_MSI_Freq_out_of_deep_sleep
...
Increase MSI clock frequency when exiting deep sleep
2020-01-09 10:49:20 +01:00
3a2ab1b56e
GR_LYCHEE: enable bootloader support
2020-01-09 16:18:14 +09:00
aad53c2377
RZ_A1H: enable bootloader support
2020-01-09 16:15:50 +09:00
40b7901cfb
Merge pull request #12217 from OpenNuvoton/nuvoton_usbd
...
Nuvoton: Add DEVICE_USBDEVICE detection in usbd implementation
2020-01-08 17:00:23 +01:00
efd3763467
NRF5x targets: Replace UARTSerial references with BufferedSerial
...
`BufferedSerial` is `UARTSerial` renamed to convey the original purpose
of the class. It is the recommended buffered I/O serial class.
2020-01-08 15:42:07 +00:00
e0c628cbb7
NRF51822: Fix baremetal linker error
...
Ensure the NRF51822 `us_ticker.c` module content is compiled in only if
the target supports USTICKER.
2020-01-08 15:33:01 +00:00
af03f839e2
Merge pull request #10959 from OpenNuvoton/nuvoton_m2351_psa
...
M2351: Support TFM level 1
2020-01-08 16:09:35 +01:00
c42125f890
Merge pull request #12151 from hugueskamba/hk-nrf-fix-baremetal-build
...
NRF5x: Fix baremetal linker error
2020-01-08 14:41:26 +01:00
1a6934adc4
Merge pull request #12081 from micgur01/master
...
Expose target_offset and header_offset parameters in targets.json
2020-01-08 14:01:57 +01:00
b924a922a8
Add DEVICE_USBDEVICE detection in usbd implementation to avoid compiler error on target without usb-device
2020-01-08 19:36:51 +08:00
b77f6b457e
Merge pull request #12055 from 0xc0170/fix_12054
...
cmsis: remove arm math
2020-01-08 12:00:54 +01:00
7819909148
NXP target: Replace UARTSerial references with BufferedSerial
...
`BufferedSerial` is `UARTSerial` renamed to convey the original purpose
of the class. It is the recommended buffered I/O serial class.
2020-01-08 09:01:19 +00:00
03cff0a02c
ST targets: Replace UARTSerial references with BufferedSerial
...
BufferedSerial is UARTSerial renamed to convey the original purpose of
the class. It is the recommended buffered I/O serial class.
2020-01-08 08:34:20 +00:00
022c0eb7dc
Increase MSI clock frequency when exiting deep sleep
...
This will optimize down the time it takes to restore the clock
settings when getting out of deep sleep.
If 48MHz is available let's use it, otherwise at least 4MHz should be
available for any MCU with MSI.
2020-01-07 17:59:33 +01:00
9448ded044
STM32G0: Update G071xx toolchain files with default files
2020-01-07 17:00:30 +01:00
fab9e3b6c7
Merge pull request #12176 from OpenNuvoton/nuvoton_usbd
...
Nuvoton: Support usbd
2020-01-07 16:38:39 +01:00
4ae87298a2
Format targets.json
2020-01-07 15:32:49 +00:00
cf2dfcbc60
STM32G0: introduction of G030/G031/G041/G070/G081 sub-families
2020-01-07 16:07:18 +01:00
57f144ec66
STM32G0: remove MBED patch
...
Goal is to remove all mis-aligment with official ST CUBE delivery
2020-01-07 16:05:34 +01:00
631ed0c0b3
STM32G0: move us_ticker_data.h file to family level
2020-01-07 16:02:08 +01:00
6d780d8773
STM32G0: move cmsis_nvic.h file to Sub-family level
2020-01-07 16:01:45 +01:00
7dd31d0319
STM32G0: move TOOLCHAIN files to Sub-family level
2020-01-07 16:00:40 +01:00
fd52eb46d1
STM32G0: move files to TARGET_STM32G0/STM32Cube_FW
2020-01-07 16:00:16 +01:00
6875d0318e
STM32G0: move files to TARGET_STM32G0/STM32Cube_FW/CMSIS
2020-01-07 15:57:04 +01:00
f322d87d43
STM32G0: move files to TARGET_STM32G0/STM32Cube_FW/STM32G0xx_HAL_Driver
2020-01-07 15:56:19 +01:00
94ead7adb2
Minor fixes for peripheral pins on Dragonfly Nano
...
1. PG8 should be labeled I2C3 not I2C1.
2. PC0 is dedicated to measuring system voltage.
2020-01-07 08:52:34 -06:00
9d16a17e7e
Merge pull request #11653 from tymoteuszblochmobica/multiple
...
Add Getaddrinfo interface for multiple DNS adresses
2020-01-07 14:53:36 +01:00
5d71e69f6a
Merge pull request #12186 from mprse/fix_for_issue_12172_stm_serial
...
STM serial init: Set pin function only if pin is defined (not NC)
2020-01-07 11:38:00 +01:00
95be7da860
Add CLKSEL0_USBSEL_HIRC48 in m2351_clk.h
2020-01-06 19:08:52 +08:00
15bf72e982
LPC11U24: Fix baremetal build and runtime error
...
* Add `USTICKER` support for `LPC11U24`.
* Add `tickless-from-us-ticker` and `boot-stack-size` overrides.
2020-01-06 08:47:13 +00:00
22e4f93400
[M2351] Add pre-built secure images for PSA
2020-01-06 15:55:01 +08:00
fc60d1f4bc
[M2351] Change memory partition for PSA
...
1. Change secure/non-secure ROM to 240KiB/272KiB
2. Change secure/non-secure RAM to 64KiB/32KiB
2020-01-06 15:55:01 +08:00
9f88fce50e
[M2351] Support secure/non-secure combined build for PSA
...
Support secure/non-secure combined build for PSA target:
1. In secure post-build, deliver built secure image to TARGET_NU_PREBUILD_SECURE
directory.
2. In non-secure post-build, merge non-secure image with secure image saved in
TARGET_NU_PREBUILD_SECURE directory.
3. In non-secure post-build, user can also drop secure image saved in
TARGET_NU_PREBUILD_SECURE directory and provide its own by adding the line below
in mbed_app.json:
"target.extra_labels_remove": ["NU_PREBUILD_SECURE"]
2020-01-06 15:55:01 +08:00
c9b4474d50
[M2351] Merge secure idle/powerdown sequences into one
...
Merge SYS_UnlockReg_S()/CLK_Idle_S() or CLK_PowerDown_S()/SYS_LockReg_S()
into nu_idle_s() or nu_powerdown_s() when they are available.
2020-01-06 15:55:01 +08:00
a0a1c4d52c
[M2351] Override NS interface by locking kernel scheduler
...
Lock kernel scheduler rather than mutex to guarantee serialization of NS
secure calls
2020-01-06 15:55:01 +08:00
dec84ede7e
[M2351] Enforce locked entry into TFM for platform-specific NSC calls
...
On M2351, some spaces like SYS/CLK are hard-wired to secure and cannot change.
To access these spaces from non-secure world, we must provide platform-specific NSC
functions. With TFM introduced, we must synchronize NSC calls into TFM to keep TFM
in sync instead of straight NSC calls. To achieve this goal, we go with the following
approach:
1. Like PSA APIs, enforce locked entry through tfm_ns_lock_dispatch().
2. Run platform-specific secure functions in default secure partition, in which SYS/CLK
spaces have been configured to be accessible.
2020-01-06 15:55:00 +08:00
41d95ef2fb
[M2351] Support TFM level 1
2020-01-06 15:55:00 +08:00
76a029e88d
[M2351] Support initializing multiple .data/.bss sections with GCC_ARM
2020-01-06 15:54:59 +08:00
db11eef0bc
[M2351] Remove draft uvisor code with GCC_ARM
...
uVisor is deprecated since mbed-os 5.10, so remove related code with it.
2020-01-06 15:54:59 +08:00
1aca8a5b56
[M2351] Make exported NSC symbols consistent across toolchains
...
This idea comes from TFM.
2020-01-06 15:54:59 +08:00
a958199594
TOSHIBA: Add hal_reset_reason_get_capabilities()
...
Override the default, weak implementation of
hal_reset_reason_get_capabilities() for TMPM066, TMPM3H6, TMPM3HQ,
TMPM46B & TMPM4G9.
2020-01-03 16:54:19 +01:00
078f71d72a
nuvoton: remove dsp math from bitutil file
2020-01-03 15:25:02 +00:00
7fd637b66b
Merge pull request #12095 from NXPmicro/Update_MXRT_SDK6
...
Update MXRT1050 to SDK 6.0
2020-01-03 15:22:13 +00:00
6afca2460e
NRF5x: Fix baremetal linker error
...
DEBUG_NRF_USER gets defined for build profiles (develop, debug)
which do not define NDEBUG (see nrf_assert.h). Therefore the definition
of the function should also be visible if DEBUG_NRF_USER is defined.
2020-01-03 15:14:09 +00:00
83101170a3
Merge pull request #12167 from dustin-crossman/pr/cypress_target_update
...
Update Cypress Targets and Assets
2020-01-03 13:15:28 +00:00
79d16ae8f7
STM serial init: Set pin function only if pin is defined (not NC)
2020-01-03 14:14:26 +01:00
115520a7b8
Add SPDX identifiers in Nuvoton USBD files
2020-01-03 20:40:47 +08:00
eab8555fc8
Support NUC472 with USB 2.0 only and set M487 USB1.1 in default
2020-01-03 20:40:46 +08:00
4cddc5de25
Add M453 USBD
2020-01-03 20:40:45 +08:00
6612ee8460
Set NANO130 CLK as 48 MHz for USBD support
2020-01-03 20:40:44 +08:00
abf3eeed64
Support NuMaker M453, NUC472, M2351 & M263 USBD; also support M0 usb-isr non-recloate vector limit
2020-01-03 20:40:43 +08:00
a5aaabff5d
NANO130 add extern C into nano100_usbd.h for C++ caller
2020-01-03 20:40:42 +08:00
93fbef2cde
Refine M487 USBD code and build M263A successfully
2020-01-03 20:40:41 +08:00
9b721bf327
Support M487 USBD 1.1 & 2.0
2020-01-03 20:40:39 +08:00
84882f773e
M487: Fixed USBD serial input pending issue
2020-01-03 20:40:37 +08:00
b34fd309e3
M487: Support USBD
2020-01-03 20:40:36 +08:00
88ae99ffca
LPC55S6: remove cmsis powerquad
...
This file requires CMSIS library (DSP).
2020-01-03 12:30:54 +00:00
fc2a71064d
Merge pull request #12068 from rajkan01/feature_bare_metal
...
Enabling small C library option and deprecating uARM toolchain
2020-01-03 11:35:48 +00:00
4feca5942a
Merge pull request #12178 from tymoteuszblochmobica/lpctls
...
Fixes for LPC55S69_NS TLS tests
2020-01-03 11:29:49 +00:00
ffd8d70a55
K64F: Add hal_reset_reason_get_capabilities()
2020-01-03 12:11:45 +01:00
f53e10e330
Update psoc6pdl to version 1.4.0
2020-01-02 10:04:45 -08:00
6ef5fb19bd
Update abstraction rtos with improved documentation and utilities.
2020-01-02 10:02:18 -08:00
7649d92131
Update psoc6 core_lib with additional documentation and bit manipulation
...
utilities.
2020-01-02 09:58:26 -08:00
Przemyslaw Stekiel
amq
Rajkumar Kanagaraj
Martin Kojtal
Chun-Chieh Li
Janne Kiiskila
Chris Trowbridge
Veijo Pesonen
d-kato
YARB(Cypress)
George Beckstein
Hugues Kamba
cyliangtw
Laurent Meunier
jeromecoutant
thegecko
Leon Lindenfelser
Filip Jagodzinski
Dustin Crossman