8a6d2b0835
Enable asynchronous communications
2016-03-24 16:25:22 +09:00
1df975a3a5
Enable asynchronous communications
2016-03-24 16:08:43 +09:00
3e896871e6
[xx_L476xx] update LSI timeout defines
...
move hal_conf.h in device folder
clean define related to LSI timeout
2016-03-24 07:44:00 +01:00
dd3cba536f
Merge pull request #1622 from c1728p9/fix_kl05_uart_clock
...
Prevent KL05 from using an unstable clock
2016-03-24 07:15:23 +01:00
ff9d4e2266
Merge pull request #1625 from dbestm/dev_l0x3_rtc
...
[xxx_L0X3] debug RTC to add a proper init check feature
2016-03-24 07:03:30 +01:00
6dbe57b058
[xxx_L0X3] debug RTC to add a proper init check feature
2016-03-21 15:01:11 +01:00
273b464fe0
Prevent KL05 from using an unstable clock
...
Add a delay after switching to the FEE clock mode so the FLL has a
chance to acquire a better lock. This fixes a bug where the first byte
sent over the UART is corrupt.
2016-03-20 19:40:13 -05:00
1f340445d5
Merge pull request #1615 from MultiTechSystems/hardfault-handler
...
add hard fault handlers for MultiTech mDot and Dragonfly platforms
2016-03-18 08:27:55 +00:00
0a0fcbb5fd
Merge pull request #1603 from arnaudrichard/master
...
Fix IRQ enabled in serial_irq_set()
2016-03-17 15:34:27 +00:00
0ae3ed496d
Remove I2C PA11 and PA12 pins
...
There is no I2C on these pins.
2016-03-17 08:44:46 +01:00
ba2a974fd1
add hard fault handlers for MultiTech mDot and Dragonfly platforms
2016-03-16 12:55:50 -05:00
3afb550952
Merge pull request #1611 from bcostm/dev_rtc_stm32f4
...
[STM32F4] Add DEVICE_RTC_LSI=0 to all targets
2016-03-15 08:54:05 +00:00
2144dadad2
Merge pull request #1608 from MultiTechSystems/f4-serial-overrun
...
avoid getting stuck in serial IRQ if ORE is set without RXNE
2016-03-14 16:02:28 +00:00
9db204bcf0
Add DEVICE_RTC_LSI=0
2016-03-14 16:01:24 +00:00
b956e27237
Add DEVICE_RTC_LSI = 0 to all targets
...
Added for clarity. This flag must be set to 1 if the LSE xtal is not
present on the board or if the RTC must be clocked by the internal
clock.
2016-03-14 14:26:27 +01:00
23c02e1675
Modify macro value of device error in device.h.
...
We modified the value of "DEVICE_STDIO_MESSAGES" and "DEVICE_ERROR_PATTERN" in order to output the error message.
2016-03-14 11:24:37 +09:00
68b034541a
avoid getting stuck in serial IRQ if ORE is set without RXNE - issue #1605
2016-03-11 11:49:03 -06:00
f178fc4835
Merge pull request #1602 from sunsmilearm/master
...
Change the uart pin to DIP pin for XBED_LPC1768
2016-03-11 09:10:17 +01:00
cbcdfab741
Fix IRQ enabled in serial_irq_set()
...
UART_IT_TC was enabled instead of UART_IT_TXE
This was causing an issue because UART_IT_TXE (and not UART_IT_TC) was disabled by same function.
Consequently if a transfer was ongoing when serial_irq_set() was called to disable IRQ, UART_IT_TC would still trigger (once).
Side effect is maybe speed: I guess using UART_IT_TC prevented implementation of continuous transfer.
This commit is focused on solving an issue observed with TARGET_STM32F4. It doesn't presume it should or shouldn't be done for other targets.
2016-03-10 14:40:41 +01:00
30df100f88
Update PinNames.h
...
Change the "tab" to 4 "space"
2016-03-10 17:57:53 +08:00
7569cdfda4
Change the uart pin to DIP pin
2016-03-10 14:10:03 +08:00
6501de9044
Merge pull request #1548 from dbestm/dev_F446_rtc
...
[NUCLEO_F446RE] RTC+LSE+init
2016-03-09 17:55:20 +00:00
81f3abc770
Merge remote-tracking branch 'refs/remotes/mbedmicro/master' into dev_F446_rtc
2016-03-09 15:40:37 +01:00
2c6c939564
Merge pull request #1580 from ohagendorf/f3xx_adc
...
[STM32F3xx] bug fix multiple ADC channels using multiple ADC blocks
2016-03-09 08:33:47 +00:00
ee20d03969
Merge pull request #1588 from adustm/master
...
[STM32F7] Update STM32F7Cube_FW version
2016-03-07 09:45:59 +00:00
abf43a33ce
Merge pull request #1587 from neilt6/master
...
[LPC11U68, LPC1549] Fixed PwmOut SCT Bugs
2016-03-05 06:52:10 +01:00
b3e2763784
[LPC11U68, LPC1549] Improved PwmOut Documentation
...
Improved commenting in pwmout_write(), pwmout_period_us(), and
pwmout_pulsewidth_us().
2016-03-04 09:23:23 -07:00
c97e05f496
[STM32F7_NUCLEO_F746ZG] Update target files with latest STM32F7Cube_FW version
2016-03-04 14:32:17 +01:00
49338852ad
[STM32F7_DISCO_F746NG] Update target files with latest STM32F7Cube_FW version
2016-03-04 14:32:00 +01:00
0b9cc09727
[STM32F7] Update STM32Cube_FW version
2016-03-04 14:28:07 +01:00
a86504d205
[LPC824] Add more comments for PwmOut fix
2016-03-04 16:00:32 +09:00
792b359a36
[LPC11U68, LPC1549] Fixed PwmOut SCT Bugs
...
* 0% duty cycle now reads back correctly
* Period & pulse-width changes now take effect immediately if the timer
is halted
2016-03-03 15:28:59 -07:00
6ab159af26
[LPC824] Fixed PwmOut SCT Bugs
...
* Fixed period & pulse-width off-by-one errors
* Fixed 0% and 100% duty cycle output
2016-03-03 17:09:35 +09:00
de3b14ec92
Merge pull request #1576 from PeterConheeney/master
...
latest changes to add arduino support, plus fixes for IOTSS BEID
2016-03-02 15:29:53 +01:00
ca41874978
disabled i2c slave
2016-03-01 08:51:08 +00:00
5376c62f3d
[STM32F7 family] fix issue with RTC init
...
the logical test for RTC_ISR_INITS was wronlgy reported from other
STMfamilies.
MBED_16 test works with this modification.
2016-03-01 08:03:23 +01:00
f96f9c2e2e
[STM32F3xx] bug fix multiple ADC channels using multiple ADC blocks
...
When two or more analogue inputs are initialized on more than one ADC HW block the initialisation fails with:
Cannot initialize ADC
The reason is the reusage of just one ADC_HandleTypeDef for all initializations (in mbed\targets\hal\TARGET_STM\TARGET_STM32F3\analogin_api.c). After the first (successful) ADC initialisation AdcHandle.State is set to HAL_ADC_STATE_READY).
But for another ADC block initialisation the AdcHandle.State has to be reset so that the HAL initialize it (in mbed\targets\cmsis\TARGET_STM\TARGET_STM32F3\stm32f3xx_hal_adc_ex.c line 424). When this state is not reset the HAL returns with an initialization error. And this error induces the above mbed error message.
The error message can be reproduced just with AnalogIn in1(xx); AnalogIn in2(yy); where xx and yy belongs to two different ADC blocks.
2016-02-29 23:50:07 +01:00
cd524f3d43
removed empty functions
2016-02-29 12:23:05 +00:00
bec257786a
commit of latest changes to arduino support, plus fixes for IOTSS BEID
2016-02-29 12:02:47 +00:00
01648b2a3b
Merge pull request #1573 from mtkrtk/analogin_patch
...
[Renesas RZ/A1H] Fix analogin peripheral names
2016-02-29 12:32:34 +01:00
1a3a19bb08
Fix analogin peripheral names
2016-02-29 17:06:32 +09:00
775c5c9eb2
Fix clock configuration for LPC1549.
...
Datasheet (Table 82) says MSEL bits should be 5, and the PSEL bits should
be 1, for the correct FCCO frequency of 288MHz. The current configuration
has FCCO = 144MHz, which is technically out of spec.
Tested on a custom LPC1549 board with crystal oscillator running at 12MHz.
2016-02-26 19:42:26 -06:00
bd0417cb15
Merge pull request #1520 from adustm/b_b96b_can
...
[STM B96B_F446VE] Add CAN feature
2016-02-26 17:07:15 +00:00
d53f444a6f
[STM32F7 family] revert RTC change in this PR that is due to new platform. It will be done through a separate PR.
2016-02-26 11:36:59 +00:00
3b3f89294e
[NUCLEO_F746ZG] fix pins and system files after manual and automatic test phase
2016-02-26 11:36:57 +00:00
1ecd69bd87
[STMF7 family] add more SPI and I2C for the new NUCLEO_F746ZG platform
2016-02-26 11:36:54 +00:00
d47d87c869
[NUCLEO_F746ZG] 8MHz, not 25
2016-02-26 11:36:52 +00:00
0068bb55d2
[NUCLEO_F746ZG] cmsis toolchain files
2016-02-26 11:36:46 +00:00
809afe7802
[NUCLEO_F746ZG] cmsis files
2016-02-26 11:36:44 +00:00
252056c17d
[NUCLEO_F746ZG] HAL Files
2016-02-26 11:36:42 +00:00
mtkrtk
dbestm
Martin Kojtal
Russ Butler
bcostm
Mike Fiore
tomoyuki yamanaka
Arnaud RICHARD
sunsmilearm
Xiao Sun
neilt6
adustm
Toyomasa Watarai
Peter Conheeney
ohagendorf
dc37