All MBED_SPM targets have been removed previously, via commits
5cc66282dd ("PSOC6: remove PSA targets") and 115b09aba43b ("psoc6:
Remove FUTURE_SEQUANA and FUTURE_SEQUANA_M0"). Remove all the dead
MBED_SPM code, as no targets use it.
Signed-off-by: Jaeden Amero <jaeden.amero@arm.com>
The Nordic SoftDevice BLE stack used by NRF51* targets only
supports legacy BLE APIs which we will removed completely.
Note: NRF52* targets which use Cordio BLE stack are unaffected.
The current Maxim BLE driver only implements the old BLE API
which is deprecated and will be removed soon. Once an updated
BLE stack for Maxim becomes available, BLE feature can be
re-enabled.
This change adds 'sectors' configuration option into 'targets.json' to enable bootloader for Nuvoton targets.
Though 'arm_pack_manager/index.json' has `sectors` available, Nuvoton's cmsis pack 'Nuvoton.NuMicro_DFP.pdsc' doesn't have 'sectors' entries and they must add into `index.json` manually. But not apply to all chip subfamilies.
To support custom board which uses a different chip subfamily, add 'secotors' into 'targets.json' for all Nuvoton targets which enable Flash IAP.
For the application(firmware) booted by bootloader(OTA),
the image doesn't need the "flash_config" and "ivt" header.
So update the link file to support both kinds of application
(firmware) booted by bootROM and bootloader.
In default, the compilation will get the image with
"flash_config" and "ivt" header, for example the bootloader
compiling.
When compiling the OTA application image, please add the
line as below in the mbed_app.json file.
"target.macros_add" : ["MBED_APP_COMPILE"]
This will remove the "flash_config" and "ivt" header in the
final image.
Signed-off-by: Gavin Liu <gang.liu@nxp.com>
Update the flash driver to support both Hyper Flash
and QSPI Flash.
In addition, the static function cannot be linked to
SRAM even defined by AT_QUICKACCESS_SECTION_CODE macro.
So remove all "static" modifier for the FLASHIAP
functions.
Signed-off-by: Gavin Liu <gang.liu@nxp.com>
The memset function from c library will be linked in flash
space, it's risk for FLASHIAP. So I wrote flexspi_memset
to replace the memset for IMX FLASHIAP, and put the function
into targets/.../TARGET_IMX/flash_api.c file. All IMX Soc
platforms can declare it as extern and use in their Soc
flexspi driver files.
Signed-off-by: Gavin Liu <gang.liu@nxp.com>
The flash access may fail when implementing flash
initialization. So there is risk for interrupt handler
which linked in flash space.
Add the critical section to avoid the risk.
Signed-off-by: Gavin Liu <gang.liu@nxp.com>
NXP MIMXRT1050 EVK can support Hyper Flash or QSPI Flash with
small hardware reworks. Modify the XIP file to support boot
from the two kinds of Flash device. The Hyper Flash should be
the default device and defined in tartgets.json with the macro
"HYPERFLASH_BOOT". To select the QSPI Flash, just remove the
macro with the below line in any overriding json file.
"target.macros_remove" : ["HYPERFLASH_BOOT"]
Signed-off-by: Gavin Liu <gang.liu@nxp.com>
Deepak Shreshti
Jaeden Amero
Martin Kojtal
Lingkai Dong
Gabor Abonyi
Kimmo Vaisanen
Chun-Chieh Li
Yoshihiro TSUBOI
MarceloSalazar
Rajkumar Kanagaraj
YARB(Cypress)
Taylor Heck
Gavin Liu
George Beckstein