mirror of https://github.com/ARMmbed/mbed-os.git
Remove ELMO target
MarceloSalazar
parent
c50c940761
commit
1e4c707cc5
|
|
@ -1,79 +0,0 @@
|
|||
/* mbed Microcontroller Library
|
||||
*******************************************************************************
|
||||
* Copyright (c) 2014, STMicroelectronics
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*******************************************************************************
|
||||
*/
|
||||
#ifndef MBED_PERIPHERALNAMES_H
|
||||
#define MBED_PERIPHERALNAMES_H
|
||||
|
||||
#include "cmsis.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
typedef enum {
|
||||
ADC_1 = (int)ADC1_BASE
|
||||
} ADCName;
|
||||
|
||||
typedef enum {
|
||||
UART_1 = (int)USART1_BASE,
|
||||
UART_2 = (int)USART2_BASE,
|
||||
UART_6 = (int)USART6_BASE
|
||||
} UARTName;
|
||||
|
||||
#define DEVICE_SPI_COUNT 5
|
||||
typedef enum {
|
||||
SPI_1 = (int)SPI1_BASE, ELMO_RF_SPI2 = SPI_1,
|
||||
SPI_2 = (int)SPI2_BASE, ELMO_SPI1 = SPI_2,
|
||||
SPI_3 = (int)SPI3_BASE,
|
||||
SPI_4 = (int)SPI4_BASE,
|
||||
SPI_5 = (int)SPI5_BASE
|
||||
} SPIName;
|
||||
|
||||
typedef enum {
|
||||
I2C_1 = (int)I2C1_BASE,
|
||||
I2C_2 = (int)I2C2_BASE,
|
||||
I2C_3 = (int)I2C3_BASE
|
||||
} I2CName;
|
||||
|
||||
typedef enum {
|
||||
PWM_1 = (int)TIM1_BASE,
|
||||
PWM_2 = (int)TIM2_BASE,
|
||||
PWM_3 = (int)TIM3_BASE,
|
||||
PWM_4 = (int)TIM4_BASE,
|
||||
PWM_5 = (int)TIM5_BASE,
|
||||
PWM_9 = (int)TIM9_BASE,
|
||||
PWM_10 = (int)TIM10_BASE,
|
||||
PWM_11 = (int)TIM11_BASE
|
||||
} PWMName;
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
|
@ -1,212 +0,0 @@
|
|||
/* mbed Microcontroller Library
|
||||
*******************************************************************************
|
||||
* Copyright (c) 2014, STMicroelectronics
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*******************************************************************************
|
||||
*/
|
||||
|
||||
#include "PeripheralPins.h"
|
||||
|
||||
// =====
|
||||
// Note: Commented lines are alternative possibilities which are not used per default.
|
||||
// If you change them, you will have also to modify the corresponding xxx_api.c file
|
||||
// for pwmout, analogin, analogout, ...
|
||||
// =====
|
||||
|
||||
//*** ADC ***
|
||||
|
||||
const PinMap PinMap_ADC[] = {
|
||||
{PA_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC1_IN0
|
||||
{PA_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1
|
||||
{PA_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2
|
||||
{PA_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3
|
||||
{PA_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4
|
||||
{PA_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5
|
||||
{PA_6, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6
|
||||
{PA_7, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7
|
||||
{PB_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8
|
||||
{PB_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_IN9
|
||||
{PC_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_IN10
|
||||
{PC_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11
|
||||
{PC_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC1_IN12
|
||||
{PC_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC1_IN13
|
||||
{PC_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC1_IN14
|
||||
{PC_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC1_IN15
|
||||
{NC, NC, 0}
|
||||
};
|
||||
|
||||
const PinMap PinMap_ADC_Internal[] = {
|
||||
{ADC_TEMP, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 16, 0)}, // See in analogin_api.c the correct ADC channel used
|
||||
{ADC_VREF, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 17, 0)}, // See in analogin_api.c the correct ADC channel used
|
||||
{ADC_VBAT, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 18, 0)}, // See in analogin_api.c the correct ADC channel used
|
||||
{NC, NC, 0}
|
||||
};
|
||||
|
||||
//*** I2C ***
|
||||
|
||||
const PinMap PinMap_I2C_SDA[] = {
|
||||
{PB_3, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C2)},
|
||||
{PB_4, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C3)},
|
||||
{PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
|
||||
// {PB_8, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C3)}, // Warning: also on SCL
|
||||
{PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // ARDUINO
|
||||
// {PB_9, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C2)},
|
||||
{PC_9, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
|
||||
{NC, NC, 0}
|
||||
};
|
||||
|
||||
const PinMap PinMap_I2C_SCL[] = {
|
||||
{PA_8, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
|
||||
{PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
|
||||
{PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // ARDUINO
|
||||
{PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
|
||||
{NC, NC, 0}
|
||||
};
|
||||
|
||||
//*** PWM ***
|
||||
|
||||
// TIM5 cannot be used because already used by the us_ticker
|
||||
const PinMap PinMap_PWM[] = {
|
||||
{PA_0, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
|
||||
// {PA_0, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1
|
||||
{PA_1, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
|
||||
// {PA_1, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)}, // TIM5_CH2
|
||||
{PA_2, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
|
||||
// {PA_2, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 3, 0)}, // TIM5_CH3
|
||||
// {PA_2, PWM_9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1
|
||||
{PA_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
|
||||
// {PA_3, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 4, 0)}, // TIM5_CH4
|
||||
// {PA_3, PWM_9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2
|
||||
{PA_5, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
|
||||
{PA_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
|
||||
{PA_7, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N - ARDUINO
|
||||
// {PA_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 - ARDUINO
|
||||
{PA_8, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
|
||||
{PA_9, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
|
||||
{PA_10, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
|
||||
{PA_11, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
|
||||
{PA_15, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
|
||||
|
||||
{PB_0, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
|
||||
// {PB_0, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
|
||||
{PB_1, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
|
||||
// {PB_1, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
|
||||
{PB_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 - ARDUINO
|
||||
{PB_4, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 - ARDUINO
|
||||
{PB_5, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
|
||||
{PB_6, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1 - ARDUINO
|
||||
{PB_7, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2
|
||||
{PB_8, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3
|
||||
// {PB_8, PWM_10,STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM1, 1, 0)}, // TIM10_CH1
|
||||
{PB_9, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4
|
||||
// {PB_9, PWM_11,STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11,1, 0)}, // TIM11_CH1
|
||||
{PB_10, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 - ARDUINO
|
||||
{PB_13, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
|
||||
{PB_14, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
|
||||
{PB_15, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
|
||||
|
||||
{PC_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
|
||||
{PC_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 - ARDUINO
|
||||
{PC_8, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
|
||||
{PC_9, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
|
||||
|
||||
{NC, NC, 0}
|
||||
};
|
||||
|
||||
//*** SERIAL ***
|
||||
|
||||
const PinMap PinMap_UART_TX[] = {
|
||||
{PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
{PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
{PA_11, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
|
||||
{PA_15, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
{PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
{PC_6, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
|
||||
{NC, NC, 0}
|
||||
};
|
||||
|
||||
const PinMap PinMap_UART_RX[] = {
|
||||
{PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
{PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
{PA_12, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
|
||||
{PB_3, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
{PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
{PC_7, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
|
||||
{NC, NC, 0}
|
||||
};
|
||||
|
||||
//*** SPI ***
|
||||
|
||||
const PinMap PinMap_SPI_MOSI[] = {
|
||||
{PA_1, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
|
||||
{PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO
|
||||
{PA_10, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)},
|
||||
// {PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||
{PB_5, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||
{PB_8, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)},
|
||||
{PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
{PC_3, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
{PC_12, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||
{NC, NC, 0}
|
||||
};
|
||||
|
||||
const PinMap PinMap_SPI_MISO[] = {
|
||||
{PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO
|
||||
{PA_11, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI4)},
|
||||
{PA_12, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)},
|
||||
// {PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||
{PB_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||
{PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
{PC_2, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
{PC_11, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||
{NC, NC, 0}
|
||||
};
|
||||
|
||||
const PinMap PinMap_SPI_SCLK[] = {
|
||||
{PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO
|
||||
{PB_0, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)},
|
||||
// {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||
{PB_3, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||
{PB_10, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
// {PB_12, SPI_3, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF7_SPI3)}, // Warning: also on NSS
|
||||
{PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
// {PB_13, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI4)},
|
||||
{PC_7, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
{PC_10, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||
{NC, NC, 0}
|
||||
};
|
||||
|
||||
const PinMap PinMap_SPI_SSEL[] = {
|
||||
// {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
|
||||
{PA_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
|
||||
{PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
|
||||
// {PA_15, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
|
||||
{PB_1, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)},
|
||||
{PB_9, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
|
||||
{PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // Warning: also on SCLK
|
||||
// {PB_12, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI4)}, // Warning: also on SCLK
|
||||
{NC, NC, 0}
|
||||
};
|
||||
|
|
@ -1,176 +0,0 @@
|
|||
/* mbed Microcontroller Library
|
||||
*******************************************************************************
|
||||
* Copyright (c) 2014, STMicroelectronics
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*******************************************************************************
|
||||
*/
|
||||
#ifndef MBED_PINNAMES_H
|
||||
#define MBED_PINNAMES_H
|
||||
|
||||
#include "cmsis.h"
|
||||
#include "PinNamesTypes.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
typedef enum {
|
||||
PA_0 = 0x00,
|
||||
PA_1 = 0x01,
|
||||
PA_2 = 0x02,
|
||||
PA_3 = 0x03,
|
||||
PA_4 = 0x04,
|
||||
PA_5 = 0x05,
|
||||
PA_6 = 0x06,
|
||||
PA_7 = 0x07,
|
||||
PA_8 = 0x08,
|
||||
PA_9 = 0x09,
|
||||
PA_10 = 0x0A,
|
||||
PA_11 = 0x0B,
|
||||
PA_12 = 0x0C,
|
||||
PA_13 = 0x0D,
|
||||
PA_14 = 0x0E,
|
||||
PA_15 = 0x0F,
|
||||
|
||||
PB_0 = 0x10,
|
||||
PB_1 = 0x11,
|
||||
PB_2 = 0x12,
|
||||
PB_3 = 0x13,
|
||||
PB_4 = 0x14,
|
||||
PB_5 = 0x15,
|
||||
PB_6 = 0x16,
|
||||
PB_7 = 0x17,
|
||||
PB_8 = 0x18,
|
||||
PB_9 = 0x19,
|
||||
PB_10 = 0x1A,
|
||||
PB_12 = 0x1C,
|
||||
PB_13 = 0x1D,
|
||||
PB_14 = 0x1E,
|
||||
PB_15 = 0x1F,
|
||||
|
||||
PC_0 = 0x20,
|
||||
PC_1 = 0x21,
|
||||
PC_2 = 0x22,
|
||||
PC_3 = 0x23,
|
||||
PC_4 = 0x24,
|
||||
PC_5 = 0x25,
|
||||
PC_6 = 0x26,
|
||||
PC_7 = 0x27,
|
||||
PC_8 = 0x28,
|
||||
PC_9 = 0x29,
|
||||
PC_10 = 0x2A,
|
||||
PC_11 = 0x2B,
|
||||
PC_12 = 0x2C,
|
||||
PC_13 = 0x2D,
|
||||
PC_14 = 0x2E,
|
||||
PC_15 = 0x2F,
|
||||
|
||||
PD_2 = 0x32,
|
||||
|
||||
PH_0 = 0x70,
|
||||
PH_1 = 0x71,
|
||||
|
||||
// ADC internal channels
|
||||
ADC_TEMP = 0xF0,
|
||||
ADC_VREF = 0xF1,
|
||||
ADC_VBAT = 0xF2,
|
||||
|
||||
// Not connected
|
||||
NC = (int)0xFFFFFFFF,
|
||||
|
||||
// Arduino connector namings
|
||||
A0 = PC_0,
|
||||
A1 = PC_1,
|
||||
A2 = PC_2,
|
||||
A3 = PC_3,
|
||||
A4 = NC,
|
||||
A5 = NC,
|
||||
D0 = PA_3,
|
||||
D1 = PA_2,
|
||||
D2 = PA_1,
|
||||
D3 = PA_0,
|
||||
D4 = NC,
|
||||
D5 = NC,
|
||||
D6 = NC,
|
||||
D7 = NC,
|
||||
D8 = NC,
|
||||
D9 = NC,
|
||||
D10 = PB_12,
|
||||
D11 = PB_15,
|
||||
D12 = PB_14,
|
||||
D13 = PB_13,
|
||||
D14 = PC_9,
|
||||
D15 = PA_8,
|
||||
|
||||
// STDIO for console print
|
||||
#ifdef MBED_CONF_TARGET_STDIO_UART_TX
|
||||
STDIO_UART_TX = MBED_CONF_TARGET_STDIO_UART_TX,
|
||||
#else
|
||||
STDIO_UART_TX = PA_9,
|
||||
#endif
|
||||
#ifdef MBED_CONF_TARGET_STDIO_UART_RX
|
||||
STDIO_UART_RX = MBED_CONF_TARGET_STDIO_UART_RX,
|
||||
#else
|
||||
STDIO_UART_RX = PA_10,
|
||||
#endif
|
||||
|
||||
// Generic signals namings
|
||||
LED1 = PB_0,
|
||||
LED2 = PB_1,
|
||||
LED3 = PB_0,
|
||||
LED4 = PB_1,
|
||||
USER_BUTTON = PB_7,
|
||||
// Standardized button names
|
||||
BUTTON1 = USER_BUTTON,
|
||||
SERIAL_TX = STDIO_UART_TX,
|
||||
SERIAL_RX = STDIO_UART_RX,
|
||||
USBTX = STDIO_UART_TX,
|
||||
USBRX = STDIO_UART_RX,
|
||||
I2C_SCL = D15,
|
||||
I2C_SDA = D14,
|
||||
SPI_MOSI = D11,
|
||||
SPI_MISO = D12,
|
||||
SPI_SCK = D13,
|
||||
SPI_CS = D10,
|
||||
RF_SPI_MOSI = PA_7,
|
||||
RF_SPI_MISO = PA_6,
|
||||
RF_SPI_SCK = PA_5,
|
||||
RF_SPI_CS = PA_4,
|
||||
RF_RESET = PC_4,
|
||||
RF_DIO0 = PC_10,
|
||||
RF_DIO1 = PC_11,
|
||||
RF_DIO2 = PC_12,
|
||||
RF_DIO3 = PD_2,
|
||||
RF_DIO4 = PB_5,
|
||||
RF_DIO5 = PB_6,
|
||||
RF_RXTX_SW = PC_13
|
||||
} PinName;
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
|
@ -1,191 +0,0 @@
|
|||
/* mbed Microcontroller Library
|
||||
* Copyright (c) 2006-2017 ARM Limited
|
||||
*
|
||||
* Licensed under the Apache License, Version 2.0 (the "License");
|
||||
* you may not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at
|
||||
*
|
||||
* http://www.apache.org/licenses/LICENSE-2.0
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an "AS IS" BASIS,
|
||||
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*/
|
||||
|
||||
/**
|
||||
* This file configures the system clock as follows:
|
||||
*-----------------------------------------------------------------------------
|
||||
* System clock source | 1- PLL_HSE_EXTC | 3- PLL_HSI
|
||||
* | (external 8 MHz clock) | (internal 16 MHz)
|
||||
* | 2- PLL_HSE_XTAL |
|
||||
* | (external 8 MHz xtal) |
|
||||
*-----------------------------------------------------------------------------
|
||||
* SYSCLK(MHz) | 96 | 96
|
||||
*-----------------------------------------------------------------------------
|
||||
* AHBCLK (MHz) | 96 | 96
|
||||
*-----------------------------------------------------------------------------
|
||||
* APB1CLK (MHz) | 48 | 48
|
||||
*-----------------------------------------------------------------------------
|
||||
* APB2CLK (MHz) | 96 | 96
|
||||
*-----------------------------------------------------------------------------
|
||||
* USB capable (48 MHz precise clock) | YES | YES
|
||||
*-----------------------------------------------------------------------------
|
||||
**/
|
||||
|
||||
#include "stm32f4xx.h"
|
||||
|
||||
|
||||
/* Select the clock sources (other than HSI) to start with (0=OFF, 1=ON) */
|
||||
#define USE_PLL_HSE_EXTC (0) /* Use external clock */
|
||||
#define USE_PLL_HSE_XTAL (1) /* Use external xtal */
|
||||
|
||||
|
||||
#if (USE_PLL_HSE_XTAL != 0) || (USE_PLL_HSE_EXTC != 0)
|
||||
uint8_t SetSysClock_PLL_HSE(uint8_t bypass);
|
||||
#endif
|
||||
|
||||
uint8_t SetSysClock_PLL_HSI(void);
|
||||
|
||||
|
||||
|
||||
/**
|
||||
* @brief Configures the System clock source, PLL Multiplier and Divider factors,
|
||||
* AHB/APBx prescalers and Flash settings
|
||||
* @note This function should be called only once the RCC clock configuration
|
||||
* is reset to the default reset state (done in SystemInit() function).
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void SetSysClock(void)
|
||||
{
|
||||
/* 1- Try to start with HSE and external clock */
|
||||
#if USE_PLL_HSE_EXTC != 0
|
||||
if (SetSysClock_PLL_HSE(1) == 0)
|
||||
#endif
|
||||
{
|
||||
/* 2- If fail try to start with HSE and external xtal */
|
||||
#if USE_PLL_HSE_XTAL != 0
|
||||
if (SetSysClock_PLL_HSE(0) == 0)
|
||||
#endif
|
||||
{
|
||||
/* 3- If fail start with HSI clock */
|
||||
if (SetSysClock_PLL_HSI() == 0) {
|
||||
while (1) {
|
||||
// [TODO] Put something here to tell the user that a problem occured...
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
/* Output clock on MCO2 pin(PC9) for debugging purpose */
|
||||
//HAL_RCC_MCOConfig(RCC_MCO2, RCC_MCO2SOURCE_SYSCLK, RCC_MCODIV_4); // 100 MHz / 4 = 25 MHz
|
||||
}
|
||||
|
||||
#if (USE_PLL_HSE_XTAL != 0) || (USE_PLL_HSE_EXTC != 0)
|
||||
/******************************************************************************/
|
||||
/* PLL (clocked by HSE) used as System clock source */
|
||||
/******************************************************************************/
|
||||
uint8_t SetSysClock_PLL_HSE(uint8_t bypass)
|
||||
{
|
||||
RCC_ClkInitTypeDef RCC_ClkInitStruct;
|
||||
RCC_OscInitTypeDef RCC_OscInitStruct;
|
||||
|
||||
/* The voltage scaling allows optimizing the power consumption when the device is
|
||||
clocked below the maximum system frequency, to update the voltage scaling value
|
||||
regarding system frequency refer to product datasheet. */
|
||||
__HAL_RCC_PWR_CLK_ENABLE();
|
||||
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE2);
|
||||
|
||||
/* Enable HSE oscillator and activate PLL with HSE as source */
|
||||
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
|
||||
if (bypass == 0) {
|
||||
RCC_OscInitStruct.HSEState = RCC_HSE_ON; /* External 8 MHz xtal on OSC_IN/OSC_OUT */
|
||||
} else {
|
||||
RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; /* External 8 MHz clock on OSC_IN */
|
||||
}
|
||||
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
||||
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
|
||||
//RCC_OscInitStruct.PLL.PLLM = 8; // VCO input clock = 1 MHz (8 MHz / 8)
|
||||
//RCC_OscInitStruct.PLL.PLLN = 384; // VCO output clock = 384 MHz (1 MHz * 384)
|
||||
//RCC_OscInitStruct.PLL.PLLM = 4; // VCO input clock = 2 MHz (8 MHz / 4)
|
||||
//RCC_OscInitStruct.PLL.PLLN = 192; // VCO output clock = 384 MHz (2 MHz * 192)
|
||||
|
||||
RCC_OscInitStruct.PLL.PLLM = 25; // VCO input clock = 2 MHz (8 MHz / 4)
|
||||
RCC_OscInitStruct.PLL.PLLN = 384; // VCO output clock = 384 MHz (2 MHz * 192)
|
||||
|
||||
|
||||
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV4; // PLLCLK = 96 MHz (384 MHz / 4)
|
||||
RCC_OscInitStruct.PLL.PLLQ = 8; // USB clock = 48 MHz (384 MHz / 8) --> Good for USB
|
||||
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
|
||||
return 0; // FAIL
|
||||
}
|
||||
|
||||
/* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers */
|
||||
RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
|
||||
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; // 96 MHz
|
||||
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; // 96 MHz
|
||||
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2; // 48 MHz
|
||||
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; // 96 MHz
|
||||
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_3) != HAL_OK) {
|
||||
return 0; // FAIL
|
||||
}
|
||||
|
||||
/* Output clock on MCO1 pin(PA8) for debugging purpose */
|
||||
|
||||
//if (bypass == 0)
|
||||
// HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSE, RCC_MCODIV_2); // 4 MHz with xtal
|
||||
//else
|
||||
// HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSE, RCC_MCODIV_1); // 8 MHz with external clock
|
||||
|
||||
return 1; // OK
|
||||
}
|
||||
#endif
|
||||
|
||||
/******************************************************************************/
|
||||
/* PLL (clocked by HSI) used as System clock source */
|
||||
/******************************************************************************/
|
||||
uint8_t SetSysClock_PLL_HSI(void)
|
||||
{
|
||||
RCC_ClkInitTypeDef RCC_ClkInitStruct;
|
||||
RCC_OscInitTypeDef RCC_OscInitStruct;
|
||||
|
||||
/* The voltage scaling allows optimizing the power consumption when the device is
|
||||
clocked below the maximum system frequency, to update the voltage scaling value
|
||||
regarding system frequency refer to product datasheet. */
|
||||
__HAL_RCC_PWR_CLK_ENABLE();
|
||||
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE2);
|
||||
|
||||
/* Enable HSI oscillator and activate PLL with HSI as source */
|
||||
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSE;
|
||||
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
|
||||
RCC_OscInitStruct.HSEState = RCC_HSE_OFF;
|
||||
RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
|
||||
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
||||
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI;
|
||||
//RCC_OscInitStruct.PLL.PLLM = 16; // VCO input clock = 1 MHz (16 MHz / 16)
|
||||
//RCC_OscInitStruct.PLL.PLLN = 384; // VCO output clock = 384 MHz (1 MHz * 384)
|
||||
RCC_OscInitStruct.PLL.PLLM = 8; // VCO input clock = 2 MHz (16 MHz / 8)
|
||||
RCC_OscInitStruct.PLL.PLLN = 192; // VCO output clock = 384 MHz (2 MHz * 192)
|
||||
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV4; // PLLCLK = 96 MHz (384 MHz / 4)
|
||||
RCC_OscInitStruct.PLL.PLLQ = 8; // USB clock = 48 MHz (384 MHz / 8) --> Good for USB
|
||||
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
|
||||
return 0; // FAIL
|
||||
}
|
||||
|
||||
/* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers */
|
||||
RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
|
||||
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; // 96 MHz
|
||||
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; // 96 MHz
|
||||
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2; // 48 MHz
|
||||
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; // 96 MHz
|
||||
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_3) != HAL_OK) {
|
||||
return 0; // FAIL
|
||||
}
|
||||
|
||||
/* Output clock on MCO1 pin(PA8) for debugging purpose */
|
||||
//HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSI, RCC_MCODIV_1); // 16 MHz
|
||||
|
||||
return 1; // OK
|
||||
}
|
||||
|
|
@ -4223,42 +4223,6 @@
|
|||
],
|
||||
"device_name": "STM32F413ZH"
|
||||
},
|
||||
"ELMO_F411RE": {
|
||||
"inherits": [
|
||||
"FAMILY_STM32"
|
||||
],
|
||||
"supported_form_factors": [
|
||||
"ARDUINO"
|
||||
],
|
||||
"core": "Cortex-M4F",
|
||||
"default_toolchain": "uARM",
|
||||
"extra_labels_add": [
|
||||
"STM32F4",
|
||||
"STM32F411xE"
|
||||
],
|
||||
"macros_add": [
|
||||
"STM32F411xE"
|
||||
],
|
||||
"supported_toolchains": [
|
||||
"ARM",
|
||||
"uARM",
|
||||
"GCC_ARM"
|
||||
],
|
||||
"detect_code": [
|
||||
"0410"
|
||||
],
|
||||
"device_has_add": [
|
||||
"MPU"
|
||||
],
|
||||
"device_has_remove": [
|
||||
"SERIAL_FC"
|
||||
],
|
||||
"default_lib": "small",
|
||||
"release_versions": [
|
||||
"2"
|
||||
],
|
||||
"device_name": "STM32F411RE"
|
||||
},
|
||||
"NUCLEO_F429ZI": {
|
||||
"inherits": [
|
||||
"FAMILY_STM32"
|
||||
|
|
|
|||
Loading…
Reference in New Issue