CMSIS repo does not support pre-processor defines, hence multiple assembly
files are added for secure/non-secure and floating point tools.
Mbed OS tools support assembly file pre-processing, but the build system
does not support multiple assembly files for each target, hence updating
the assembly files.
(cherry picked from commit 287121ffdc)
mbed OS used older RTX4 version and with osThreadDef accepting only 3
parameters, to preserve compatibility we hardcode the 'instances'
parameter to 1.
(cherry picked from commit 428acae1b2ac15c3ad523e8d40755a9301220822)
(cherry picked from commit 4360b7bbf8)
Move the function "mbed_get_a9_tick_irqn()" declared in os_tick.h
to SysTimer.h so it does not get overridden when RTX is updated.
This function was originally added in:
3d3e89097d
Fixes for RZ_A1H issue 6543
Schedule the next OS tick inside of the ticker interrupt rather than
in the systick interrupt. Scheduling this while the ticker is
dispatching prevents an unnecissary rescheduling since this
rescheduling is done anyway when dispatching is finished.
This is particularly useful for the low power ticker on devices with
LPTICKER_DELAY_TICKS set to a non-zero value. This is because the low
power ticker cannot be reschduled immediately and needs to fall back
onto the microsecond ticker which temporarily locks deep sleep.
Note - the optimization in this commit is made possible by the commit:
"Don't reschedule ticker while dispatching"
RTX Config header file is internal and not exposed. With latest fixes to use
only public header files from RTX, we need to add these 2 new macros for
RTX ARMC lib configuration.
os_thread_t and family are internal and should not be used (thus we included
internal header file). Instead, use those that are exposed via rtx_os.h file.
Dedicated safe printfs were originally developed to print data over serial with minimal resources. But this adds more code space, so we are switching to use mbed_error_printf.
1. Define RTX_NO_MULTITHREAD_CLIB to provide Mbed-specific multi-thread support for ARM/ARMC6
2. All overridden _mutex_xxx functions are declared with __USED to avoid excluded by linker
NOTE: Microlib doesn't support multi-thread
Add the OsEventObserver mechanism. A client interested in receiving
notifications on certain OS events can register to receive notifications
with osRegisterForOsEvents. This is useful for clients like the secure
memory allocator, which observes thread switching events in order to
swap in and out different memory allocator objects.
OsEventObserver objects expect a context to be maintained per thread on
their behalf. Add this context to the thread control block and extend
the thread creation functions with the ability to supply a context.
uVisor doesn't set the PSP of the target thread. The RTOS sets the PSP
of the target thread from the target thread's TCB. However, when
interrupts of higher priority than PendSV happen between the call to
uVisor to switch boxes, and the RTOS setting PSP, the uVisor vIRQ
interrupt handler will attempt to use an invalid PSP (the PSP from
before the box and thread switch). This leads to a crash. Make box and
thread switching atomic by disabling interrupts immediately before the
box switching until immediately after the new PSP is set.
CMSIS repo does not support pre-processor defines, hence multiple assembly
files are added for secure/non-secure and floating point tools.
Mbed OS tools support assembly file pre-processing, but the build system
does not support multiple assembly files for each target, hence updating
the assembly files.
mbed OS used older RTX4 version and with osThreadDef accepting only 3
parameters, to preserve compatibility we hardcode the 'instances'
parameter to 1.
(cherry picked from commit 428acae1b2ac15c3ad523e8d40755a9301220822)
Non-Secure threads can access secure calls only when tz_module attribute is set
as 1(OS_SECURE_CALLABLE_THREAD), while thread creation.
Hence adding tz_module as an argument to ctor.
Default value for timer/idle thread trustzone identifier is 0, updated
it to 1 to allow threads to access secure functions when timer is secure device.
Systick handler switch to secure/nonsecure issues addressed:
1. Switch to secure/nonsecure context save/restore is based on 6th bit in
LR register, correct the bug (R7 instead of LR was used for decision)
2. Prevent R7 from being corrupted in Sys_ContextSave
3. Branch when non-secure rather than secure
CMSIS repo does not support pre-processor defines, hence multiple assembly
files are added for secure/non-secure and floating point tools.
Mbed OS tools support assembly file pre-processing, but the build system
does not support multiple assembly files for each target, hence updating
the assembly files.
Given the 64-bit timebase, add wait_until to Semaphore.
Naming is based on Thread::wait_until.
pthreads uses "timedwait", but that's not a good fit against our
existing wait() - pthreads only has an absolute-time wait, not relative.
Given the 64-bit timebase, add trylock_until to Mutex.
Naming is based on a combination of Mutex::trylock, Thread::wait_until,
and C++11 timed_mutex::try_lock_until.
pthreads and C11 use "timedlock", but that's not a good fit against our
existing trylock() and lock(timeout) - they have only absolute-time
waits, not relative.
To increase the similarity to C++11, add trylock_for - same parameters
as lock, but with the bool return value of trylock and trylock_until.
Add an assertion when convering status codes to booleans to check that
there are no non-timeout errors.
Given the 64-bit timebase, add wait_until to ConditionVariable.
Move the timeout example to wait_until(), and give wait_for() an
alternative example, as it's no longer the best option for a
timeout.
Tidy up - remove the redundant RESUME_SIGNAL definition.
Give C++ access to the RTOS's absolute timebase, reducing the need to
run private Timers and similar. Allows wait_until functionality, and
makes it easier to avoid time drift.
Place it in a new header and namespace in case we want more kernel
functions in future.
Try to cover over the breaking API change potentially upcoming in
CMSIS-RTOS 2.1.1, when it reduces the tick count from 64-bit to 32-bit.
(See https://github.com/ARM-software/CMSIS_5/issues/277)
Explicitly state that ticks are milliseconds in mbed OS, despite CMSIS
RTOS 2 permitting different tick rates.
See also https://github.com/ARMmbed/mbed-os/pull/3648 (wait_until
for condition variables) and
https://github.com/ARMmbed/mbed-os/issues/5378 (EventQueue should
use RTOS tick count).
Remove the assert that the tick count of the OS matches the tick
count of the tickless timer as this occurs frequently when
debugging. This is because the function svcRtxKernelResume
only increments the OS's tick count until the next wakeup event
so if the device was halted by a debugger past the next wakeup
event the tick counts will be out of sync.
Call to osThreadTerminate is guarded by local_id check, to avoid parameter error fault when deleting or terminating Thread object that was not started.
armcc fopen allocated a mutex using the retargeted system-level
_mutex_initialize function. Interestingly, malloc also uses this
same _mutex_initialization function, which prevents a full solution
relying on malloc. The solution previously implemented involved using
the rtx mutex pool for the first 8 mutexes, then falling back on
malloc.
The previous implementation relied on osMutexNew returning an error
on out-of-memory. An unrelated change causes osMutexNew to instead
assert (except for release mode). This meant if you exceed 8 system-
level mutexes in armcc you will hit an assert. Since the filesystem
code can call fopen an unlimited number of times, this is a problem.
Solution is to keep track of which static mutexes we've allocated, so
we know before calling osMutexNew if we need to call malloc.
Also _mutex_free never deallocated the malloced mutexes, which would
cause fopen to leak memory.
Various RTOS classes were storing their CMSIS-RTOS creation attribute
structure as a member, when it's not required after construction. Reduce
memory by eliminating this member.
uVisor doesn't set the PSP of the target thread. The RTOS sets the PSP
of the target thread from the target thread's TCB. However, when
interrupts of higher priority than PendSV happen between the call to
uVisor to switch boxes, and the RTOS setting PSP, the uVisor vIRQ
interrupt handler will attempt to use an invalid PSP (the PSP from
before the box and thread switch). This leads to a crash. Make box and
thread switching atomic by disabling interrupts immediately before the
box switching until immediately after the new PSP is set.
Russ Butler
Bartek Szatkowski
deepikabhavnani
Oren Cohen
Cruz Monrreal
Brendan McDonnell
Senthil Ramakrishnan
ccli8
Jimmy Brisson
Martin Kojtal
Jan Jongboom
Michael Coulter
Vladimir Umek
Russ Butler
Jaeden Amero
Kevin Bracey
Filip Jagodzinski
Cruz Monrreal II
Tamas Kaman
Brendan McDonnell
Amanda Butler
Martin Kojtal
Maciej Bocianski
Robert Rostohar
Maciej Rogozinski
Christopher Haster