f9497e5ed4
Tests: HAL API: Reset_reason: Add tests
2019-05-24 11:35:33 +02:00
4e28b80b5f
Tests: HAL: Watchdog: Fix timing accuracy test
...
Relax time measurement margins for UBLOX_EVK_ODIN_W2.
2019-05-24 11:35:33 +02:00
8baf16760d
Tests: Drivers: Watchdog: Add tests
2019-05-24 11:35:28 +02:00
c4d9300f9d
Tests: HAL API: Watchdog: Add time accuracy tests
2019-05-24 11:35:28 +02:00
f1e744d4a0
Tests: HAL API: Watchdog: Add dev reset tests
2019-05-24 11:35:27 +02:00
484b716c6e
Tests: HAL API: Watchdog: Add tests
2019-05-24 11:35:26 +02:00
6e405463ae
Add a sanity check for the GPIO pinmap
2019-05-23 14:29:26 +02:00
b8745b8ed8
Build PS tests only if FLASHIAP exists
2019-05-22 17:17:23 +03:00
1dbb478bbb
Merge pull request #10597 from LDong-Arm/systimer_lptimer
...
SysTimer should be buildable without lp ticker
2019-05-22 11:59:16 +01:00
7765d39283
The targets FUTURE_SEQUANA_M0_PSA and FUTURE_SEQUANA_PSA are removed
...
due to partial implementation. Having FUTURE_SEQUANA_M0 and
FUTURE_SEQUANA PSA targets is misleading.
Signed-off-by: Devaraj Ranganna <devaraj.ranganna@arm.com>
2019-05-21 15:00:31 +01:00
f859289634
Merge pull request #10489 from kjbracey-arm/gpio_api_nc
...
gpio_api.h: Clarify desired behaviour for NC
2019-05-21 14:36:49 +01:00
9fc54c9774
systimer tests: do not require lp ticker
...
SysTimer can run on us ticker now. Only deep sleep test
strictly requires lp ticker and it already has build conditions
in place.
2019-05-16 17:04:22 +01:00
3ea1c56124
Merge pull request #10147 from kjbracey-arm/atomic_bitwise
...
Assembler atomics
2019-05-13 14:18:05 +01:00
548a40ee62
Merge pull request #10541 from guialonsoalb/master
...
Adding QSPI support to target RHOMBIO_L476DMW1K
2019-05-13 13:59:40 +01:00
2239babf26
Merge pull request #10543 from mirelachirica/wise_1570_udp_echotest_non_recvtimeout
...
Cellular: Increase receiving timeout for UDP echo non-blocking test
2019-05-13 13:45:11 +01:00
842d145d91
Py3 fixes for test scripts
2019-05-08 13:46:01 +03:00
26facc7f9b
Cellular: WISE-1570 needs greater receiving timeout to pass UDPSOCKET_ECHOTEST_NONBLOCK test
...
Reason for needing greater timeout could be this test's performance.
UDPSOCKET_ECHOTEST_BURST_NONBLOCK is implementing the receiving
differently and is passing with 1 second timeout.
2019-05-08 10:43:08 +03:00
70bc390410
added QSPI support to target RHOMBIO_L476DMW1K
2019-05-07 15:44:09 +02:00
66f446b9a9
Add GPIO NC test
...
Check two items of defined behaviour - that you can initialise a
gpio_t with NC, and you can detect that state with gpio_is_connected().
2019-05-02 16:12:21 +03:00
40f8cb95a8
Merge pull request #10435 from morser499/pr/cy-smif
...
Add support for QSPI to Cypress Boards
2019-05-02 13:41:56 +01:00
a8570ffe6c
Added support for QSPI to Cypress Boards
2019-05-01 07:09:58 -07:00
117e3e82b6
Update PSA includes to autogenerated files
2019-04-30 14:41:09 +03:00
ab01bea46d
Delete autogenerated files
2019-04-30 14:10:23 +03:00
1de0712272
Merge pull request #9944 from deepikabhavnani/stm32_splitheap
...
GCC - Add support to split heap across 2-RAM banks
2019-04-30 11:02:51 +01:00
a5f1a125f1
Merge pull request #10426 from michalpasztamobica/udp_echo_error_handling
...
UDPSOCKET_ECHOTEST fails if a packet of every size was not sent
2019-04-26 13:33:25 +01:00
4fe06e0949
Critical tests: use atomics
...
Get rid of a volatile, and use atomics to synchronise with the interrupt
routine instead.
Useful as a non-RTOS basic compilation check for the atomics - the
fuller atomic test relies on the RTOS.
2019-04-26 13:12:35 +03:00
0fabf37564
Add some atomic tests
...
These are platform tests, but rely on the RTOS to run multiple threads
to exercise it.
(The atomics are still useful in non-RTOS, to protect against interrupt
handlers, but testing versus other threads is easier. The implementation
is the same either way, so doesn't seem worth testing non-RTOS
specifically).
2019-04-26 13:12:35 +03:00
d1017ea274
UDPSOCKET_ECHOTEST fails if a packet of any given size was not sent at least once
2019-04-18 11:38:11 +03:00
ca887a9712
Merge pull request #10407 from kfnta/warn_fix
...
Fix warnings on PSA secure builds
2019-04-18 08:16:51 +01:00
6b9d1573fb
Merge pull request #10096 from fkjagodzinski/test-usb-hid
...
Add USB HID tests
2019-04-17 14:06:51 +01:00
f51eb6215a
Fix warnings on PSA secure builds
2019-04-17 10:37:51 +03:00
0b7d9af4dd
Merge pull request #10385 from michalpasztamobica/wifi_test_readme
...
README file for wifi tests gives configuration example
2019-04-16 09:10:26 +01:00
79dddf84f0
Merge pull request #10381 from michalpasztamobica/echotests_loop_fix
...
ECHOTEST internal loop simplification and fix
2019-04-16 08:45:25 +01:00
631540a421
ECHOTEST internal loop simplification and fix
...
The loop was wrongly incrementing the index of the array after assiging
the value. Thus the first array element was used twice and the last one
was never user. The issue is fixed and the loops are refactored and
simplified to avoid such confusion in the future.
2019-04-15 11:54:03 +03:00
e87d0ce654
README file for wifi tests gives configuration example.
2019-04-12 11:36:28 +03:00
42b5680697
Multihoming fixed according to new LWIP implementation.
2019-04-11 20:54:48 -05:00
b1e48db242
Merge pull request #10225 from kjbracey-arm/memorypool_blocking_alloc
...
Mail/MemoryPool: blocking alloc
2019-04-11 20:21:44 -05:00
56154c096d
Update the test case to check multiple bank heap regions
2019-04-09 12:08:49 -05:00
852390fcdc
Tests: USBHID: Make report test optional on Linux
...
This test case uses `hidapi` -- a cross-platform Python module.
To keep the initial Mbed setup as simple as possible, the `hidapi`
module is skipped on Linux hosts because of its external dependancies
for this platform.
The module can be easily installed following instructions from the
README file.
The test case is skipped if the host machine lacks `hidapi` module.
2019-04-09 17:03:22 +02:00
111f485cbe
Tests: USBHID: Remove unnecessary wait_ready call
...
Every test case waits at greentea_parse_kv() anyway.
2019-04-09 17:03:22 +02:00
36eb700ede
Tests: USBHID: Handle variable driver setup time
...
Wait for the host driver to finish setup before sending any HID reports
from the device.
USBHID::wait_ready() blocks until the device reaches 'configured' state,
but the state of the host HID driver remains unknown to the device.
2019-04-09 17:03:22 +02:00
4f880691fb
Tests: USBHID: Reuse VID & PID from basic test
...
To successfully use pyusb on Windows hosts, a Zadig configuration has to
be performed. Since config for basic tests has already been provided,
use it again.
2019-04-09 17:03:22 +02:00
572beb6731
Tests: USBHID: Add tests
2019-04-09 17:03:21 +02:00
af3a7656a4
Merge pull request #10330 from michalpasztamobica/greentea_test_fixes
...
Reduce greentea socket tests failures related to network issues
2019-04-09 11:03:33 +02:00
872edd4964
Relax TLSSOCKET_RECV_TIMEOUT sigio timeout
2019-04-08 12:56:41 +03:00
3505923d02
Test udpsocket_recv_timeout does not check packet reception ratio
2019-04-08 12:56:29 +03:00
2603e295e8
FastModel: Skip low-power ticker time drifting test for models
...
FastModels are a software simulator for Arm platform/cores.
They mean to be used as a tool for testing or early prototype stage development.
Due to the nature of software simulator can't grantee the timing accuracy like HW.
So time drifting test is skipped for software models.
2019-04-03 16:51:02 +01:00
0f6a8357e7
Merge pull request #10037 from michalpasztamobica/tcp_skip_if_unsupported
...
TCP/TLS Socket tests will skip if TCP is not supported
2019-03-29 13:30:37 +00:00
8e819de43e
Merge pull request #10030 from jamesbeyond/fm_test
...
TESTS: skip timing accuracy test on FastModels
2019-03-28 17:58:51 -05:00
53920a62b7
Merge pull request #9904 from michalpasztamobica/greentea_packet_size_fix
...
Handle oversized packets in tcp and udp socket tests.
2019-03-28 17:01:52 -05:00
09183c94b9
TCP/TLS Socket tests will skip if TCP is not supported
2019-03-28 10:08:53 +02:00
1549c5c425
Merge pull request #10160 from itayzafrir/crypto-access-control-additional-tests
...
Crypto access control additional tests
2019-03-27 17:09:08 -05:00
266d4c43a2
Handle oversized packets in tcp, tls and udp socket tests
2019-03-27 11:01:16 +02:00
d26fe0fe55
Merge pull request #10184 from mirelachirica/wise_1570_udp_echotest_nonblocking
...
Cellular: Increase receiving timeout for UDP echo non-blocking test
2019-03-27 00:34:47 -05:00
75e4210633
Fix typos
2019-03-26 15:27:22 +02:00
b8d90fb1dc
MemoryPool: Add timeout and wake tests
2019-03-26 14:12:59 +02:00
ec3c6f37f9
Cellular: WISE-1570 needs greater receiving timeout to pass UDPSOCKET_ECHOTEST_NONBLOCK test
...
Reason for needing greater timeout could be this test's performance.
UDPSOCKET_ECHOTEST_BURST_NONBLOCK is implementing the receiving
differently and is passing with 1 second timeout.
2019-03-26 09:10:02 +02:00
e7987a9f04
Merge pull request #10166 from cmonr/astyle-fix
...
Travis CI: Tweak astyle to not over-exclude files
2019-03-22 06:36:07 +01:00
db8a018fec
Merge pull request #9959 from michalpasztamobica/refactor_socket_stats_usage
...
Refactor socket stats to reduce boiler plate
2019-03-21 10:46:15 +01:00
f99431f7c2
Merge pull request #9444 from maciejbocianski/usb_msd_tests
...
Usb msd tests
2019-03-21 10:42:55 +01:00
e7c2e66543
Added missing astyle corrections for TESTS/mbed_hal/*
2019-03-20 12:57:36 -05:00
0d86248316
Merge pull request #10120 from mirelachirica/networkinterface_connection_status_fix
...
Cellular: Fix network interface test for cellular targets
2019-03-20 15:40:30 +01:00
2dfafe6299
Crypto acl tests destroy keys
2019-03-19 17:57:24 +02:00
f1722cb8dc
Add crypto acl test - key agreement
2019-03-19 17:47:48 +02:00
c8eb51d576
Add crypto acl test - key derivation
2019-03-19 13:35:24 +02:00
dbb33ef423
Merge pull request #9801 from vmedcy/fix-eventqueue-h
...
Correctly include EventQueue.h
2019-03-16 22:52:40 -05:00
2fad1547a7
Merge pull request #10116 from 0xc0170/rollup
...
Rollup pt2: fixes for 5.12.1
2019-03-15 16:15:55 +01:00
91b81c65fb
Merge pull request #9905 from michalpasztamobica/test_recv_return_less_or_equal
...
Tests: check if recv returned too much data
2019-03-15 14:57:01 +01:00
d15bcfe83a
Cellular: Fix network interface test for cellular targets
2019-03-15 15:29:46 +02:00
fc97a75632
Remove #ifndef NO_GREENTEA from tests
2019-03-14 11:16:44 +02:00
b7ed4b5d9e
Refactor socket stats to reduce bioler plate
...
Add a proper test case setup and teardown which does the socket stats
checks in tcp, udp and tls.
2019-03-14 11:09:35 +02:00
f7a2d4a082
move init of test into greentea init function
2019-03-13 10:43:00 +02:00
83e7b66872
TESTS: skip timing accuracy test on FastModels
2019-03-11 10:40:31 +00:00
661613c998
Rename psa_system_reset to mbed_psa_system_reset
...
add noreturn attributes
update lifecycle service to use psa/error.h
fix doxygen
2019-03-11 10:43:19 +02:00
5677b386af
Reset ITS before the test start
2019-03-10 10:53:38 +02:00
162425b574
Increase the stack pointer check range
...
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2019-03-08 07:33:48 -06:00
aedec74b9a
Added support for PSA target to WIFI_BT board
...
Added WiFi_Bt CM4 PSA target in mbedos json
Added SPE-NSPE mailbox initialization for CM4 SystemInit
Made similar to FUTURE_SEQUANA configurations
Copied FUTURE_SEQUANA CM0 SPM part for WiFi_Bt smoke test
Added CY8CKIT_062_WIFI_BT_M0 and CY8CKIT_062_WIFI_BT_M0_PSA targets
Sorted files for new CY8CKIT_062_WIFI_BT_M0 and CY8CKIT_062_WIFI_BT_M0_PSA targets
Copied files for CY8CKIT_062_WIFI_BT_M0_PSA from FUTURE_SEQUANA
Copied and updated cm0p start files
Corrected according to FUTURE_SEQUANA
Changes to M0 startup files to have SPM started
Fixed implicit declaration warning
Commented interrupts enabling according to FUTURE_SEQUANA flow
Updated prebuild spm_smore CM0 hex for CM4 target
Turned on greentea environment
Used special memory region for common CM0/CM4 data
Updated prebuild CM0 SPM hex
Placed shared memory region for flash operations into SPM shared memory region
Updated cyprotection code and configuration
Start address of protected regions is set by a defined number from target.json
Added masters pcMask configuration
Added support for PSA target to WIFI_BT board
Enabled resources protection for SPM
Aligned RAM usage according to Cypress FlashBoot and CyBootloader
alligned protection config
Added CYW943012P6EVB_01_M0 target
Enlarged heap size, remobed nv_seed
Added heap reservation in linker script from mbed-os
Removed heap size definition
turned on nv_seed config
Removed nv_seed macros
Enabled protection for PSoC6 CM0
Added PSoC6 CM0 PSA readme
Enabled mbed_hal-spm test
Enabled nv_seed and removed unneeded ipc config define
Added SPDX string to feature_ble cypress target files
Removed unneeded supported_toolchains lines for Cypress targets
Disabled protection settings
Corrected flash initialization for PSoC6 CM0 PSA
Changed PSoC6 IPC6 protection for flash
Enabled special flash initialization and enabled protection settings
Updated and added new prebuild PSoC6 CM0 PSA hex files
Disabled HW TRNG and CRC for PSoC6 CM4 PSA target
Added missing const to allow types to match
Updated PSoC6 WIFI_BT_PSA prebuilt directory
Moved PSoC6 shared section usage area definition to begin of ld
Added initial ARM_STD linker and startup files for PSoC6 CM0
Added initial IAR linker and startup files for PSoC6 CM0
Added defines to disable some SPM protection settings for PSoC64
Moved Flash function variables into separate memory region
Added defines for new Public area definition
Updated PSoC6 CM0_PSA hex-files
2019-03-07 08:40:20 -08:00
0b4f16f456
Disable SPM tests with TF-M issues for TF-M targets
2019-03-06 16:42:51 +02:00
355f09bbac
Merge pull request #9875 from tymoteuszblochmobica/testfix
...
Apply proper network interface verification.
Only run for platforms which have two interfaces and prevent crashes otherwise.
2019-03-04 15:24:41 +01:00
e75794ec6e
Merge pull request #9888 from ARMmbed/feature-armc6
...
ARM Toolchain update to ARM Compiler 6.11(ARMC6)
2019-03-04 12:23:38 +01:00
f420a5551d
Fix multihoming tests for case of no ethernet device
2019-03-04 11:25:56 +01:00
9f6156abb3
Merge pull request #9916 from kfnta/skip_spm_hal_m33
...
Skip test on Cortex M33 devices
2019-03-04 10:51:14 +01:00
577d286639
Skip test on Cortex M33 devices
...
On platforms using coretx m33 accessing the secure memory will cause SecureFault instead of Hardfault.
SecureFault is implemented in the secure image and cannot be changed in runtime.
2019-03-03 18:43:04 +00:00
fa65546aa2
Merge pull request #9913 from kfnta/fix_acl_test
...
Fix bug in crypto_acl test
2019-03-03 19:30:43 +01:00
4fe5a41734
Fix bug in crypto_acl test
2019-03-03 14:41:27 +02:00
cfb60ec955
Fixes
...
* Add #include <stddef.h> to psa/client.h
* Add Attestation service to TFM
* Update FUTURE_SEQUANA_PSA secure binaries
* Remove MBED_SPM from K64F
* Refactor psa_manifest/sid.h
* Increase stackl size in spm-client tests
* Add handling of errors from psa_get in partitions
2019-03-03 13:30:58 +02:00
b62c48977f
Review fixes
2019-03-03 10:55:46 +02:00
20d7f817df
Fix astyle
2019-03-03 10:55:46 +02:00
ef76ec83ee
Generate psa_manifest/sid.h
2019-03-03 10:55:46 +02:00
a1bd657594
Test partition modification
2019-03-03 10:55:44 +02:00
bd9a738473
Move SPM_PANIC to psa/service.h
2019-03-03 10:55:44 +02:00
306a51f6c0
Update psa_get() to return psa_status_t
2019-03-03 10:55:44 +02:00
3edcf455a6
mbed-crypto sanity tests enable run without greentea
2019-03-03 10:55:43 +02:00
f9fbd6ae82
Align PSA SPM tests to TF-M
2019-03-03 10:55:42 +02:00
483b23c318
Fix SPM warnings
2019-03-03 10:54:55 +02:00
68d91fb277
Remove osDelay from smoke test
2019-03-03 10:54:55 +02:00
5e4649bae8
Remove obsolete test
2019-03-03 10:54:54 +02:00
dfbc7b6b7a
Adapt partitons
2019-03-03 10:54:54 +02:00
aad114aa55
Genrerate SPM data
2019-03-03 10:54:54 +02:00
194fa129fb
Update recently added previous macro name uses in tests
2019-03-01 13:53:47 -06:00
c81f71b2de
Tests: check if recv returned too much data
2019-03-01 18:01:38 +02:00
3c0c5759bf
Regenerate mbed-spm files
2019-03-01 09:40:45 +02:00
befed111f5
Merge pull request #9668 from moranpeker/psa-init-attestation
...
PSA Initial Attestation service
2019-02-28 18:25:16 -06:00
e393c2dc0b
Merge pull request #9785 from c1728p9/default_to_us_ticker
...
Use us ticker for tickless on devs with wrapper
2019-02-28 18:25:01 -06:00
e6caa122cb
Merge pull request #9812 from kjbracey-arm/wait_ns
...
Add wait_ns API
2019-02-28 18:21:46 -06:00
15cb4a4fee
Fix compiler flags for ARMC6 in sys stats test
2019-02-28 12:03:15 -06:00
8d880bb63e
Skip deep sleep test when running from US ticker
...
Skip the systimer deep sleep test when running from the microsecond
ticker, since the microsecond ticker doesn't support operation in deep
sleep mode.
2019-02-28 10:57:00 -06:00
b8bdaf9e9f
Fix acl test asymmetric encrypt decrypt
2019-02-28 10:29:53 +02:00
31d202b3f6
Change error code handling of calls to psa_call
2019-02-28 10:29:52 +02:00
7ff689be20
Add USB mass storage test
2019-02-27 17:18:41 +01:00
2918f74883
Free dynamic memory in test partition
2019-02-27 16:28:36 +02:00
2227e33e5a
Add acl test - use other partitions' key - asymmetric encrypt decrypt
2019-02-27 16:28:36 +02:00
5a7ed318ae
Add acl test - use other partitions' key - asymmetric sign verify
2019-02-27 16:28:36 +02:00
db90606a34
Add acl test - use other partitions' key - aead
2019-02-27 16:28:36 +02:00
b8079c3d09
Add acl test - use other partitions' key - cipher
2019-02-27 16:28:36 +02:00
d1e61a0df4
Add acl test - use other partitions' key - mac
2019-02-27 16:28:35 +02:00
200930d752
Refactor test partition helper function to create and generate a key
2019-02-27 16:28:35 +02:00
2c1f0b37f2
Add acl test - use other partitions' key - manage key
2019-02-27 16:28:35 +02:00
8c21f10696
Add acl test - create key same id different partitions
2019-02-27 16:28:35 +02:00
9adda5b88e
Add acl test - open other partitions' key
2019-02-27 16:28:35 +02:00
2146e74c84
Prepare for crypto access control tests
...
- Add a secure side test partition
- Add a proxy to communicate with the test partition
- Add main test file
2019-02-27 16:28:35 +02:00
e819b23638
Fix attestation main to check PSA target before includes
2019-02-27 14:14:33 +02:00
41bd381462
General fixes of spelling, newline, un needed code
...
-Correct spelling errors
-Add newline at end of file
-Remove un needed code
2019-02-27 14:14:27 +02:00
e12f5eeaa7
Add ifdef TARGET_PSA and MBEDTLS_PSA_CRYPTO_C to test file
...
if not supported return error
2019-02-27 14:14:23 +02:00
2117a26cb1
Get security lifecycle by psa_security_lifecycle_state function
...
-Add bug fix for psa_security_lifecycle_state function - PR #9745
-Remove lifecycle data from temp boot status data
-Update attesttation_partition_json file to use
PSA_PLATFORM_LC_GET and generate partition
code - auto generated files update
2019-02-27 14:14:17 +02:00
4101ee92df
Add checks ,initialization,remove unneeded code and files license update
2019-02-27 14:14:14 +02:00
636753b404
Attestation: Add a new define for attestation private key id
2019-02-27 14:14:13 +02:00
8fc9c8fdab
Attestation: astyle fixs
...
Runing astyle over attestation file to pass CI
2019-02-27 14:14:11 +02:00
a994499bf3
Atteststaion: Update header files
...
-Remove psa_initial_attesttaion.h
-Move psa_initial_attesttaion_api.h and psa_attest_inject_key.h into
inc folder
-Update include in test file
2019-02-27 14:14:11 +02:00
22437fca7e
Attestation: Add test for initial attestation service
...
Add single test that check inject attestation key and attestation get token
2019-02-27 14:14:10 +02:00
5f45b0af92
Attestation: aut- generated files by generate_partition_code.py
...
Atestation paration added.
2019-02-27 14:14:09 +02:00
4b13c8a212
Merge pull request #9768 from c1728p9/feature-hal-spec-usb-device
...
Bring USB Feature branch into master
2019-02-26 22:48:02 -06:00
d2df5a03cb
Increase wait_ns test tolerance
2019-02-26 17:30:52 +02:00
08a8f16e73
Add wait_ns timing test
2019-02-26 17:30:51 +02:00
b08ddaad8b
Merge pull request #9794 from michalpasztamobica/greentea_tcpsocket_sigio
...
Refactor tcpsocket tests to use sigio and not to wait
2019-02-26 10:30:56 +01:00
044d0c9cb1
Merge pull request #9778 from michalpasztamobica/add_missing_wifi_config_params
...
Add missing wifi parameters to test configs
2019-02-25 17:30:36 -06:00
999273f7e5
Refactor tcpsocket tests to use sigio and not to wait
2019-02-25 15:33:09 +02:00
6527cf2bad
Update files to include SPDX-License-Identifier
...
Update the header of all files to use a newer license template which
includes SPDX-License-Identifier.
2019-02-22 10:53:24 -06:00
9f116d9f33
Applied more astyle fixes
2019-02-22 10:53:24 -06:00
005df3559c
Applied suggested astyle fixes
2019-02-22 10:53:23 -06:00
8d731561cf
Remove inclusion of mbed.h from USB
...
Remove mbed.h from USB files and fix the build errors this causes.
This is required to pass CI.
2019-02-22 10:53:23 -06:00
4a4dcdb5b8
Tests: USB: Use astyle to format the test class
2019-02-22 10:53:23 -06:00
38032453a5
Tests: USB: Fix 'endpoint halt' test
...
Abort all endpoint transfers before running the test again.
Use an updated vendor request to explicitly restart device reads.
2019-02-22 10:53:23 -06:00
1ec448dbd0
Tests: USB: Add a README for Linux users
...
Explain how to overcome xHCI limitations in kernels prior to v4.17 and
successfully run USB tests.
2019-02-22 10:53:22 -06:00
7db3a8a34a
Tests: USB: DTR fix for Linux hosts
...
A DTR line is used to signal that the host has configured a terminal and
is ready to transmit and receive data from the USB CDC/Serial device.
When this test suite is run with the use of a Linux host, a workaround has
to be used to overcome some platform specific DTR line behavior.
Every time the serial port file descriptor is opened, the DTR line is
asserted until the terminal attributes are set.
As a consequence, the device receives a premature DTR signal with a
duration of 200-500 us before the correct, long-lasting DTR signal set by
the host-side test script. (tested on the Linux kernel 4.15.0)
The solution is to wait for the first DTR spike, ignore it, and wait for
the correct DTR signal again.
2019-02-22 10:53:21 -06:00
a4a3b3d429
Remove USB disconnect delay from Serial test
...
Remove the USB disconnect delay since there is no reason this is
needed. Failures which occur without this indicate a device or host
problem.
2019-02-22 10:53:21 -06:00
930b29dd83
Tests: USB: Increase serial open retries
...
Double the number of attempts that are made to open a serial port.
This makes tests run more reliably on Windows.
2019-02-22 10:53:21 -06:00
96154b577a
Tests: USB: Remove TX_DELAY_MS from serial test
...
Remove TX_DELAY_MS and all the places it was called since it is not
needed when DTR flow control is used.
2019-02-22 10:53:21 -06:00
8f72f314d7
Tests: USB: Use DTR to make Serial tests reliable
...
Update the serial host test to set DTR low before opening a serial
port. Set DTR high once the serial object is ready. This ensures that
no data is sent by the device until the host is ready.
2019-02-22 10:53:21 -06:00
31fe3ee11e
Tests: USB: Increas the size of RX CDC test data
...
This ensures the flow control is tested.
2019-02-22 10:53:21 -06:00
53f7cd5561
Tests: USB: Fix Windows USB SN handling
2019-02-22 10:53:21 -06:00
3d4d10191c
Tests: USB: Update code comments
2019-02-22 10:53:21 -06:00
edf360d2fc
Tests: USB: Use SN generated by the host machine
2019-02-22 10:53:21 -06:00
fc366291a2
Tests: USB: Correct reconnect delay
...
Setting to 1 ms to be on the safe side. The USB spec defines this delay
to be at least 200 us.
2019-02-22 10:53:21 -06:00
2d4d111445
Tests: USB: Wait before transmitting data to host
...
Despite having ECHO and ECHOCTL POSIX lflags disabled by default by
pyserial, a delay is needed for host to properly handle data received
from USB serial/CDC device.
With no delay host would echo 0x00-0x31 characters prefixed with '^'.
2019-02-22 10:53:20 -06:00
dbfd43a098
Tests: USB: Wait before closing host's port
...
This delay eliminates the possibility of the device detecting the port
being closed when still waiting for data.
2019-02-22 10:53:20 -06:00
7b80cb6586
Tests: USB: Add Serial test for line coding change
2019-02-22 10:53:20 -06:00
bf3aa29e0b
Tests: USB: Use the serial number to find device
...
Use the USB device SN instead of VID & PID to find the device port name
on the host system.
2019-02-22 10:53:20 -06:00
07ffcb4269
Tests: USB: Fix USB reconnect tests for Win hosts
2019-02-22 10:53:20 -06:00
7a4b36c37f
Tests: USB: Add tests for Serial class.
2019-02-22 10:53:20 -06:00
3ed7d8139b
Tests: USB: Add tests for CDC class.
2019-02-22 10:53:20 -06:00
cb6a6dbd20
Fix USB traceback during testing when wrong size
...
In the pyusb_basic host test check the length of control transfers
before comparing contents for equality.
2019-02-22 10:53:20 -06:00
1f8bf46f2e
Tests: USB: Check ep buffer is released by abort
...
Validate that endpoint buffer is not used after a transfer has been
aborted.
2019-02-22 10:53:20 -06:00
36d4c355a9
Tests: USB: Update endpoint halt test
...
Wait for a locally created Timer thread to finish before returning.
2019-02-22 10:53:19 -06:00
c677bf7426
Tests: USB: Decrease the max data size for iso ep
...
Although the USB spec sets the upper limit on FS isochronous endpoint
payloads to 1023 B, this value is hard to test in practice. Moreover,
not all the targets Mbed OS supports (like NUCLEO_F207ZG) are able to
handle all the endpoints set to max.
2019-02-22 10:53:19 -06:00
7563a0f03f
Update test to restart reads after unstall
...
After an endpoint is unstalled any pending transfers are terminated.
This patch re-starts any reads that were ongoing.
2019-02-22 10:53:19 -06:00
27bd1656b1
Tests: USB: Update ep callbacks
...
Endpoint callbacks no longer have endpoint as a param. This update was
introduced in #7267 .
2019-02-22 10:53:19 -06:00
c12e2d15f5
Tests: USB: Add data toggle test
2019-02-22 10:53:19 -06:00
ff8a9b6ae8
Tests: USB: Update endpoint tests
...
Fix the host script issues present on Windows machines.
Add 0 B payload size to bulk endpoints test.
Update halt and abort tests according to PR comments.
Add an explicit request to start reading on OUT endpoints.
2019-02-22 10:53:19 -06:00
62dc95f60a
Tests: USB: Generic: Update documentation
2019-02-22 10:53:19 -06:00
686126b8ea
Tests: USB: Generic: Add basic endpoint tests
2019-02-22 10:53:19 -06:00
79376c6f00
Tests: USB: Add device config files for Zadig
...
Zadig is a tool used to install generic USB drivers on Windows machines.
These drivers are necessary to run USB device test suite on Windows
hosts.
2019-02-22 10:53:18 -06:00
799cde0fc3
Remove endpoint parameter from USB callbacks
...
Remove the endpoint parameter from endpoint callbacks. This
information is redundant because endpoints are known at
construction time because they must be in the configuration
descriptor.
2019-02-22 10:53:18 -06:00
793044eb26
Fix various USB warnings
...
Fix the following warnings:
-[Warning] USBTester.cpp@45,0: #1299-D: members and base-classes will
be initialized in declaration order, not in member initialisation
list order
-[Warning] USBTester.h@41,0: #1300-D: ~USBTester inherits implicit
virtual
-[Warning] USBAudio.cpp@345,0: #1035-D: single-precision operand
implicitly converted to double-precision
-[Warning] USBHID.cpp@29,0: #1300-D: ~AsyncSend inherits implicit
virtual
-[Warning] USBHID.cpp@61,0: #1300-D: ~AsyncRead inherits implicit
virtual
-[Warning] USBHID.cpp@93,0: #1300-D: ~AsyncWait inherits implicit
virtual
-[Warning] EndpointResolver.cpp@125,26: '<<' in boolean context, did
you mean '<' ? [-Wint-in-bool-context]
2019-02-22 10:53:17 -06:00
d66e576227
USB basic test documentation update
2019-02-22 10:53:15 -06:00
fee14771e9
USB basic test update
...
disable suspend/resume test
disable sync frame test
improve reset test
2019-02-22 10:53:15 -06:00
bcfe96b83c
Update usb test to connect and block itself
...
Update the basic usb test so it does blocking itself since blocking
connect was removed from USBDevice.
2019-02-22 10:53:15 -06:00
9f94a5fc56
Fix typo in USBTester.h
...
Fix the spelling of product_release.
2019-02-22 10:53:15 -06:00
12c91c3b7e
pyusb_basic test update
...
test code refactoring
align test to use device multiconfiguration
2019-02-22 10:53:14 -06:00
e85d5a33cd
pyusb_basic test add helper functions
2019-02-22 10:53:14 -06:00
972fee6143
pyusb_basic test formatting fixes
2019-02-22 10:53:14 -06:00
9b4970342b
Extend USB test class configuration
2019-02-22 10:53:14 -06:00
6bb6d6fb42
Explicitly specify USBPhy used for testing
...
Add a parameter to the USBPhy class so mock or wrapper USBPhy classes
can be used.
2019-02-22 10:53:14 -06:00
a341a7c258
Make USB disconnect + connect time explicit
...
Create the define MIN_DISCONNECT_TIME_US to be used as the amount of
time that must pass between connect and disconnect for the host to
reliably detect reconnection. Replace the wait calls delaying for this
value to wait_us to indicate the precision required. Finally, remove
the unnecessary calls to wait_ms in
repeated_construction_destruction_test.
2019-02-22 10:53:14 -06:00
ff3b0c1623
code formatting fixes
2019-02-22 10:53:13 -06:00
69a095cf3e
USBDevice - add multiconfiguration support
2019-02-22 10:53:13 -06:00
c2c3e01c36
USBDevice - add support for deconfiguration
2019-02-22 10:53:13 -06:00
e4ffc6dea0
USB reset test fix
2019-02-22 10:53:13 -06:00
50adb03f88
Fix USB tests
...
Change the direction used in set interface to match the USB
specification. This allows USB tests to pass on OSX.
2019-02-22 10:53:13 -06:00
0a787e7fe9
Skip USB reset tests on OSX
...
OSX machines don't allow you to reset USB devices. Skip this test on
OSX so testing can still be used.
2019-02-22 10:53:13 -06:00
49504d66ca
Fix for USB set_clear_feature_test for OSX
2019-02-22 10:53:13 -06:00
f31eb68ec5
Update USBTester product name
...
Change the name reported by USBTester from CDC DEVICE to
MBED TEST DEVICE.
2019-02-22 10:53:12 -06:00
33bef331e6
USB generic tests
2019-02-22 10:52:35 -06:00
aedeee068a
Update USBTester for the new USB API
...
Update the class USBTester so it works with the new zero-copy
USBDevice API.
2019-02-22 10:52:34 -06:00
de12bb57fa
Update USBTester for simplified read handling
...
Remove read_start and replace read_finish with read to match the new
USBDevice API.
2019-02-22 10:52:33 -06:00
f9f12766d8
Add USBDevice test code
...
Add a USB test and the class USBTester.cpp to go along with it.
2019-02-22 10:52:32 -06:00
19c6732105
Add missing wifi parameters to test configs
2019-02-22 10:13:14 +02:00
49aae7b43e
Update secure binaries
2019-02-22 02:04:00 +02:00
870bd05904
Merge pull request #9708 from davidsaada/david_protected_storage
...
Implement PSA protected storage & restructure PSA storage implementation
2019-02-21 17:30:56 -06:00
41eb5cbfd9
Implement PSA protected storage & restructure PSA storage implementation
...
- Move all PSA storage code under psa/storage directory
- Create a global PSA error codes header, eliminating ITS specific ones
- Create a common header file for PSA storage type definitions,
eliminating ITS specific ones
- Create a common implementation for PS & ITS
- Implement protected storage feature
- Change ITS test to be common to PS as well
2019-02-21 20:58:59 +02:00
b0a33273ff
Correctly include EventQueue.h
...
There are two EventQueue.h in mbed-os codebase:
events/EventQueue.h
features/FEATURE_BLE/ble/pal/EventQueue.h
By accident, `mbed compile` generates includes.txt with the correct
order of include search paths. This is not the case for the CMake
exporter: targets with FEATURE_BLE enables fail to compile with errors:
mbed-os/features/cellular/framework/AT/ATHandler.h:99:60: error:
'events' has not been declared
Update all places to always include either "events/EventQueue.h"
or "ble/pal/EventQueue.h": to always find the correct header.
2019-02-21 17:59:05 +02:00
dbd92c746b
Merge pull request #9387 from tymoteuszblochmobica/Sockets
...
Multihoming initial release
2019-02-21 13:50:03 +01:00
641189c357
Multihoming change parameter orded in gethostbyname
2019-02-20 14:37:33 +02:00
dfab4de4cf
crypto: test: Use new PSA error codes
...
The PSA Framework and PSA Crypto error code names have been unified and
renamed in some cases. Use the new unified names.
2019-02-20 11:31:30 +02:00
7f4475d924
Merge pull request #9736 from 0xc0170/fix_licenses_files
...
tools/test/cmsis: add license header
2019-02-20 09:38:55 +01:00
b59b8170a6
Merge pull request #9698 from michalpasztamobica/netsocket_documentation_cleanup
...
Netsocket documentation cleanup
2019-02-19 15:34:26 -06:00
4c04771c5d
Merge pull request #9653 from kfnta/tfm_src_integ
...
TF-M sources integration to Mbed-OS
2019-02-19 15:28:44 -06:00
feae56eea1
Merge pull request #9493 from RonEld/add_platform_initialization_in_trng_test
...
Initialize platform in trng test
2019-02-19 15:27:40 -06:00
4cbcc36c3c
Merge pull request #9730 from michalpasztamobica/tlssocketsimultaneous_temporary_removal
...
Greentea: Remove TLSSocket_simultaneous test
2019-02-19 14:56:02 -06:00
00feb5313a
Update copyright years
2019-02-19 17:39:46 +02:00
49141376ee
Multihoming initial release
...
Added Multihoming feature to LWIP (ability to use more than one network interfaces) for increasing networking reliability.
This involves:
LWIP interface
LWIP IP routing
DNS storage
Sockets (bind to interface name possibility)
possibility to add non default network interface
cellular middleware modifications if cellular connection is used
2019-02-19 17:39:46 +02:00
60c6740c88
Build SPM tests only for MBED_SPM targets
2019-02-19 15:19:05 +02:00
31da50e8fa
Merge pull request #9718 from michalpasztamobica/greentea_tcpsocket_suite_timeout
...
Greentea tests: user-configurable timeouts
2019-02-18 14:15:39 +01:00
22bf92bb7e
Initialize platform in trng test
...
Add calls to `mbedtls_platform_setup()` and
`mbedtls_platform_terminate()` to the trng greentea test, to
initialize the hardware acceleration engines, in some platforms.
2019-02-18 11:43:32 +02:00
5eaf08e899
Netsocket documentation cleanup
2019-02-18 10:40:42 +02:00
c08f51aa36
copyright 2019 fix
2019-02-15 13:37:40 +00:00
ca57bdd481
Greentea tests: user-configurable timeouts
...
Now it is enough to add:
"macros": [
"MBED_GREENTEA_TEST_XXXSOCKET_TIMEOUT_S=20"
],
to mbed_app.json, where XXX is on of {DNS, TLS, UDP, TCP}.
Also network-* tests are now configurable: network-interface, network-wifi, network-emac with a similar macro.
2019-02-15 15:08:15 +02:00
a089661f05
Greentea: Remove TLSSocket_simultaneous test
...
The reason is that some platforms lack memory to run it. To be brought
back once TLS library memory consumption is optimized.
2019-02-15 11:59:28 +02:00
92ed1cb10c
Add flash sum check
...
Check that flash size sum up to all sectors combined
2019-02-14 17:30:51 +02:00
17878e3ce8
test mbedmicro: fix licenses
2019-02-14 14:02:35 +00:00
852f667d05
wifi test: add license info
2019-02-14 13:58:07 +00:00
f2abdcbcc6
Merge pull request #9639 from michalpasztamobica/esp8266_connect_timeout
...
ESP8266: connect() checks errors from ESP chip
2019-02-13 20:00:37 -06:00
da5719113c
Merge pull request #9701 from kfnta/entorpy_inject_test_refactor
...
Refactor psa entropy inject test
2019-02-13 17:28:53 -06:00
2e9d6d2938
Merge pull request #9645 from AriParkkila/cellular-netsocket
...
Change TESTS/netsocket/ for cellular testing
2019-02-13 17:28:35 -06:00
704a1cb6c8
Merge pull request #9702 from kfnta/psa_fix_partition_dpendecies
...
Fix dependencies of platform partition
2019-02-13 17:11:06 -06:00
1b233c5d5e
Merge pull request #9686 from michalpasztamobica/tlssocket_invalid_handshake_port_fix
...
Greentea tests: set correct port to test against google.com
2019-02-13 17:10:48 -06:00
45c44eb07c
Fix dependencies of platform partition
2019-02-13 17:10:12 +02:00
eb48d3cbeb
Clear ITS environment in psa entropy tests
...
mbed_psa_reboot_and_request_new_security_state() API replaced its_reset() which is now a secure API only
This change is necessary for a clean environment for the test
2019-02-13 14:21:17 +02:00
6bb0894c47
Refactor psa entropy inject test
...
Replace TEST_ASSERT with more specific assertions
2019-02-13 14:20:55 +02:00
56badd8616
Change TESTS/netsocket/ for cellular testing
2019-02-13 01:30:42 -08:00
3e6cd4e89d
Merge pull request #9501 from caixue1102/mbed-os-rda
...
Add WIFI support for RDA target UNO_91H
2019-02-12 20:05:27 -06:00
d92e33dcee
Add WIFI support for RDA target UNO_91H
2019-02-12 22:59:53 +08:00
b5c00aa6b7
Greentea tests: set correct port to test against google.com
2019-02-12 15:40:11 +02:00
091509705f
Merge pull request #9570 from VeijoPesonen/bugfix-tests-netsocket-udp_udpsocket_echotest_nonblock
...
tests-netsocket-udp: UDPSOCKET_ECHOTEST_NONBLOCK fixes
2019-02-12 09:55:20 +01:00
799476dd55
Merge pull request #9630 from michalpasztamobica/publish_documentation
...
Publish tests documentation for DNS, Emac, NetworkInterface and Wifi
2019-02-11 18:47:55 -06:00
5c4d5e346d
Merge pull request #9582 from michalpasztamobica/greentea_socket_improvements
...
Greentea Socket test improvements
2019-02-11 18:45:38 -06:00
8f932a476f
Merge pull request #9449 from c1728p9/pinmap-extension
...
Pinmap extensions
2019-02-11 18:24:19 +01:00
6a184da381
ESP8266: connect() can handle ESP's errors.
...
ESP8266Interface::connect() checks the exact return value from
the underlying ESP8266::connect() call.
Increased timeout for network-wifi greentea tests to 6 minutes.
2019-02-11 17:20:14 +02:00
d5892ce312
Add a sanity check test for pinmaps
...
Add a test which sanity checks all pinmaps.
2019-02-08 09:10:50 -06:00
ae20556635
Edit README.md
...
Edit file, mostly for inclusion of articles.
2019-02-07 16:10:38 -06:00
e9c44a86ac
Edit README.md
...
Edit file, mostly for inclusion of articles.
2019-02-07 15:52:20 -06:00
629e8a0e05
Edit README.md
...
Edit file, mostly for inclusion of articles and complete sentences.
2019-02-07 15:45:08 -06:00
099cbb1d30
tests-network-interface: drops unreferenced variable
2019-02-07 12:04:09 +02:00
ba75924c28
tests-netsocket-tls: TLSSOCKET_ECHOTEST deletes socket on failure case
2019-02-07 12:01:09 +02:00
ea3d70e0b1
Publish tests documentation for DNS, Emac, NetworkInterface and Wifi
...
Documentation moved from internal Confluence pages.
2019-02-06 16:22:21 +02:00
dcba5ffa3c
Merge pull request #9529 from kfnta/its_crypto
...
RollUp PR Crypto with ITS
2019-02-04 17:14:05 +01:00
df3cdaa983
tests-netsocket-udp: UDPSOCKET_ECHOTEST_NONBLOCK execution time limit
...
Test case is allowed to take not more than a half what has been given
to the whole UDP suite.
UDP test cases reorganized so that the longest running ones are
executed last.
2019-02-04 12:33:34 +02:00
b3fd8a9bef
Greentea DNS test: added debug print
2019-02-01 15:34:38 +02:00
99fc26ecdf
Greentea Socket bind tests made ipv6-aware
2019-02-01 15:34:07 +02:00
fba66cf7f3
Greentea UDPSOCKET_RECV_TIMEOUT increase time tolerance
2019-02-01 14:22:05 +02:00
3d4582bda0
Merge pull request #9572 from michalpasztamobica/greentea_tls_ipv6_compliant_website
...
Use an ip4- and ip6-compliant site to test TLS certificate error reporting
2019-02-01 08:26:08 +01:00
3f92beb08b
Update FUTURE_SEQUANA_PSA secure binaries
2019-01-31 19:31:53 +02:00
2c5d246249
Merge pull request #9429 from SeppoTakalo/TCPSOCKET_endpoint_close
...
Fix TCPSOCKET_ENDPOINT_CLOSE: Cannot accept WOULD_BLOCK
2019-01-31 10:20:20 -06:00
ea9f104463
Fix Licenses
2019-01-31 17:17:58 +02:00
f5e4f69c02
Update FUTURE_SEQUANA_PSA secure_binaries
2019-01-31 17:17:56 +02:00
47365d4620
Update ITS test
2019-01-31 17:17:56 +02:00
3d3ee3834d
Update tests to use new APIs
2019-01-31 17:17:56 +02:00
51b76350d9
Remove ITS Reset partitions from tests
2019-01-31 17:17:55 +02:00
0de098e149
Add FUTURE_SEQUANA prebuilt binaries
2019-01-31 17:17:55 +02:00
156d3b785b
Replace psa_prot_internal_storage.h with psa/internal_trusted_storage.h
2019-01-31 17:17:54 +02:00
d2025b7150
Tests
2019-01-31 17:17:54 +02:00
34895a05ad
CR fixes
2019-01-31 17:17:54 +02:00
8841ba69f8
Align to new spec changes and prep for TFM SPM
...
# Conflicts:
# components/TARGET_PSA/services/crypto/COMPONENT_PSA_SRV_IPC/psa_crypto_spm.c
# components/TARGET_PSA/services/crypto/COMPONENT_SPE/psa_crypto_partition.c
2019-01-31 17:17:53 +02:00
c3f3dcbc0e
Use an ip4- and ip6-compliant site to test TLS certificate error reporting
2019-01-31 15:00:13 +02:00
4d31455a0f
tests-netsocket-udp: UDPSOCKET_ECHOTEST_NONBLOCK restores non-blocking
...
Fixes a bug where after dropping bad packets receiver doesn't restore
the socket back to non-blocking state as it's supposed to.
2019-01-31 12:59:40 +02:00
a4ed473afc
Merge pull request #9515 from VeijoPesonen/bugfix-tests-netsocket-udp_udpsocket_sendto_invalid
...
tests-netsocket-udp UDPSOCKET_SENDTO_INVALID allow unsupported empty UDP packet
2019-01-30 10:08:34 +01:00
7d036b52cd
Merge pull request #9283 from michalpasztamobica/tlssocket_greentea
...
Add TLSSocket greentea tests.
2019-01-30 09:55:21 +01:00
fa46e3b499
crypto: Add test of hash clone
...
Test hash clone by adding a test to TESTS/mbed-crypto/sanity/main.cpp
2019-01-29 11:43:27 +02:00
e66b2203a9
crypto: Add test of key handles
...
Test key handles by adding a test to TESTS/mbed-crypto/sanity/main.cpp
2019-01-29 11:43:26 +02:00
f882a07708
crypto: Update tests to use key handles
...
Update tests in TESTS/mbed-crypto/sanity/main.cpp
2019-01-29 11:43:26 +02:00
b0fca1ffc8
Test UDPSOCKET_SENDTO_INVALID allows NSAPI_ERROR_UNSUPPORTED
2019-01-29 10:59:06 +02:00
af65522652
Publish TLSSocket test documentation
...
The whole README.md had to be updated to match the internal Confluence documentation, which can now be locked. In the process I also updated any spotted mistakes in tests documentation, removed the obsolete TCPServer tests documentation and added a test which was missing from UDPSocket's main.
2019-01-23 16:54:19 +02:00
815066f853
Add debug prints to triage the test timeouts
2019-01-22 16:40:02 -06:00
62d6eb5673
Increase the timeout for the host side script and the test
2019-01-22 16:04:47 -06:00
d568e2160b
Add TLSSocket greentea tests.
...
TLSSocket tests based on existing TCPSocket greentea tests and TLSSocket icetea tests.
2019-01-22 12:46:48 +01:00
a09b5f5c6b
Merge pull request #9416 from fkjagodzinski/test_update-systimer
...
RTOS: SysTimer: Fix test timing issues
2019-01-21 13:44:53 +01:00
7b29593a41
Merge pull request #9415 from SeppoTakalo/ONME-4140
...
Allow NSAPI_ERROR_UNSUPPORTED from Socket::setsockopt()
2019-01-21 13:43:37 +01:00
5c46faeb86
Merge pull request #9417 from jeromecoutant/PR_DNSTIMEOUT
...
Netsocket DNS test: increase timeout value
2019-01-21 13:42:24 +01:00
27cce81580
Merge pull request #9258 from jeromecoutant/PR_FLASHSKIP
...
FLASH test: skip test if test region overlaps code
2019-01-21 13:15:51 +01:00
6b92d32b3e
Fix TCPSOCKET_ENDPOINT_CLOSE: Cannot accept WOULD_BLOCK
...
This testcase uses Socket in blocking mode, and therefore
WOULD_BLOCK should not be accepted.
The logic was wrong anyway, because return value was tested
to be negative before testing with WOULD_BLOCK which is negative
as well.
Also replaced TEST_FAIL() macro with TEST_ASSERT_EQUAL() to
make the return code visible in test log.
2019-01-21 10:46:11 +02:00
5840281682
ROTS: SysTimer: Fix test timing issues
...
Use a busy loop with non-blocking Semaphore::wait(0) calls instead of a
single Semaphore::wait(osWaitForever) to improve time measurement
accuracy. Looping in Semaphore::wait(0) prevents the board from entering
sleep or deepsleep modes while waiting for the semaphore. By skipping
the overhead wakeup time, we get more accurate timings.
2019-01-18 17:10:39 +01:00
68deb05d1b
Merge pull request #9376 from michalpasztamobica/tcpsocket_greentea
...
TCP/UDP greentea tests refactoring and cleanup
2019-01-17 21:52:40 -06:00
436d3d043d
Merge pull request #9257 from jeromecoutant/PR_FLASHIAP_TIMING
...
FLASHIAP test: skip test if test region overlaps code
2019-01-17 21:50:20 -06:00
3a190656fa
Netsocket DNS test: increase timeout value
2019-01-17 17:39:43 +01:00
26dcd0d90a
Allow NSAPI_ERROR_UNSUPPORTED from Socket::setsockopt()
2019-01-17 18:02:04 +02:00
6e629e1ba6
Gemalto Crinterion UDP test adjustments
...
Adjusting the tests to match the cellular modems ELS61-E2 and BGS2-W requirements.
2019-01-15 12:38:48 +01:00
59e8dedb67
TCP/UDP greentea tests refactoring and cleanup
2019-01-15 10:00:35 +01:00
435d944dd0
fix its_reset test
2019-01-13 18:30:22 +02:00
ef681bf18d
Add SPDX-License-Identifier and Copyright in new files
2019-01-08 15:32:08 +01:00
01ca8443a8
Add stack size unification test
...
Test checks stack sizes:
- ISR stack: exactly 1KB (with exception for NORDIC - 2KB and RENESAS - Cortex A targets not supported for this test)
- Main thread stack: exactly 4KB (with some exceptions - 3KB)
- Thread stack: exactly 4KB
2019-01-08 15:32:01 +01:00
482396ce7d
FLASH test: skip test if test region overlaps code
2019-01-04 16:50:54 +01:00
b712e71194
FLASHIAP test: skip test if test region overlaps code
2019-01-04 16:38:32 +01:00
acd69ae7e1
Merge pull request #9229 from maciejbocianski/qspi_hal_test_k82f_fix
...
hal-qspi_test: move frequency setting before flash init
2019-01-04 08:56:54 +00:00
5625b6964d
Fix Python 3 syntax in rtc host test
2019-01-03 12:04:36 -06:00
cc89c20abc
Merge pull request #9175 from michalpasztamobica/greentea_ignore_unsupported
...
Greentea tests ignore bind returning UNSUPPORTED
2019-01-03 14:59:50 +00:00
fc593d2d6f
hal-qspi_test: move frequency setting before flash init
...
Frequency setting just after erase operation was causing some data
inconsistencies during write/read operations on some targets (frdm-k82f).
To fix this, frequency setting was moved before flash memory init.
2019-01-03 12:17:23 +01:00
d7497a82dd
Merge pull request #9128 from orenc17/spm_hal_test_fix
...
Fix SPM HAL test
2019-01-02 09:18:02 +00:00
b409267883
Update TESTS/mbed_hal/spm/main.cpp
...
Use r3 instead of r4
Co-Authored-By: orenc17 <oren.cohen@arm.com>
2018-12-23 11:37:29 +02:00
aceeb269d1
Merge pull request #9159 from SeppoTakalo/unflag_extented
...
Drop MBED_EXTENTED_TESTS flagging from network tests.
2018-12-20 16:29:51 +00:00
a2110d5411
Greentea tests ignore bind returning UNSUPPORTED
2018-12-20 15:38:07 +01:00
ab1c2be997
Merge pull request #8957 from InfernoEmbedded/fix-8913
...
Fix incorrect #ifdefs on DEVICE_FOO macros
2018-12-20 10:52:06 +00:00
85c2fc7fb1
Merge pull request #9148 from davidsaada/david_fix_app_end_addr
...
Fix FLASHIAP_ROM_END macro for GCC_ARM & IAR toolchains
2018-12-20 10:48:26 +00:00
2617c5d55b
Don't use define checks on DEVICE_FOO macros (mbed code)
...
The DEVICE_FOO macros are always defined (either 0 or 1).
This patch replaces any instances of a define check on a DEVICE_FOO
macro with value test instead.
Signed-off-by: Alastair D'Silva <alastair@d-silva.org>
2018-12-20 10:16:42 +11:00
18404e93be
Drop MBED_EXTENTED_TESTS flagging from network tests.
...
All properly working IP stacks are required to pass Mbed OS socket tests.
This have now proven with current Ethernet devices with LwIP stack.
2018-12-19 16:18:33 +02:00
f3bac3451c
Fix FLASHIAP_ROM_END macro for GCC_ARM & IAR toolchains
...
- Consider data section in GCC_ARM toolchain
- Consider init_array section in IAR toolchain
- Rename macro to FLASHIAP_APP_ROM_END_ADDR for clarity sake
2018-12-19 12:05:08 +02:00
995725b50a
Merge pull request #9129 from jeromecoutant/PR_DNSDEBUG
...
DNS tests: improve debug messages
2018-12-18 14:26:35 -06:00
f949ee5388
Merge pull request #9127 from jeromecoutant/PR_WIFIDEBUG
...
WIFI test: improve debug messages
2018-12-18 13:23:12 -06:00
bd4b99c498
DNS tests: improve debug messages
2018-12-18 13:32:45 +01:00
80c6f5f8ee
Merge pull request #8972 from kjbracey-arm/merge_file_truncate
...
Merge feature-posix branch (FileHandle::truncate)
2018-12-17 14:49:56 -06:00
eed3fb12c7
Merge pull request #9109 from kjbracey-arm/fseek_test_rework
...
Rework fseek/ftell tests
2018-12-17 14:43:06 -06:00
9b573acfa4
Run the non-secure cases first
2018-12-17 16:43:09 +02:00
6a9de3178e
Fix SPM HAL test
...
When accessing non-secure ram and flash r1 was actually used by the calling function.
Change to a callee saved register.
2018-12-17 16:38:13 +02:00
da6ad75666
WIFI test: improve debug messages
2018-12-17 15:20:02 +01:00
7b5939c05b
Add ftruncate / fstat(st_size) unit test
2018-12-14 19:29:29 +02:00
ff7a316a32
Rework fseek/ftell tests
...
ARM C library is really good at optimising out calls to underlying
seek. The only ones we were actually detecting in the empty file case
were the ones that the default FileHandle::size() made itself during
the SEEK_END case.
When we implement TestFile::size() directly, we will no longer see
a single seek call from the ARM C library in the empty file case, so
remove those tests.
Beef up the non-empty file case, adding checks that we are making
underlying read+write calls in the correct position, as a proxy for
direct checks for underlying seek being called.
2018-12-14 19:29:27 +02:00
64e7e468b2
Merge pull request #9089 from jeromecoutant/DEV_QSPI_TEST
...
STM32 QSPI update
2018-12-14 10:14:13 -06:00
3b138fba02
Fix long writes/reads stack overflowing ( #8802 )
...
* writes and reads queue, not overflow stack IOTPAN-295
2018-12-13 18:18:01 -06:00
84ee55bfe0
QSPI tests: update STM32 boards configuration
...
NB: STM directory removed in flash_configs as there is no STM memory
2018-12-13 10:56:35 +01:00
0af1ecd305
STM32 DISCO : enable QSPI tests when available
2018-12-13 10:56:27 +01:00
e502675bd1
Fix test-netsocket-tcp greentea test build fails.
...
main.cpp was missing comma at the end of line.
2018-12-11 12:51:30 +02:00
89527604ae
Merge pull request #9033 from fkjagodzinski/fix-stream
...
Fix Stream for IAR toolchain
2018-12-10 19:20:06 -06:00
91e9010dd2
Tests: Stream: Use a quote from C99 spec
...
Use C99 instead of Linux man entry.
2018-12-10 16:30:16 +01:00
13a24bc0bd
Test MPU is enabled by init
2018-12-10 16:45:30 +02:00
5c9cc5b8f1
Tests: Stream: Add more test cases
2018-12-10 12:09:22 +01:00
c48312ded4
Missing socket greentea tests implementation
2018-12-07 10:35:39 +01:00
035e8e0b77
Merge pull request #8964 from kfnta/parser_empty_tests
...
Correct behavior of PSA code generator
2018-12-06 21:25:42 -06:00
78d6018ecc
Merge pull request #8745 from kfnta/feature-new-target-future-sequana-psa
...
Add new target future sequana PSA
2018-12-06 13:13:36 -06:00
935f2bdfbc
Correct behavior of PSA code generator
...
* Don't generate files if a test does not contain additional partitions
2018-12-06 18:17:09 +02:00
cb58b34581
Prebuilt images
2018-12-06 11:33:35 +02:00
2df2fc7d29
Fix PSA-HAL, TRNG, TLS tests
2018-12-06 01:22:50 +02:00
51a462aeea
Use entropy injection on any NVseed platform or PSA dual-core/v8
2018-12-05 20:08:35 +02:00
870bebc9ac
fix mbedmicro-rtos-mbed tests
2018-12-05 19:59:54 +02:00
86c7a59b36
Basic test can run on single v7's
2018-12-05 15:37:52 +02:00
d614fd8955
The inject test can run also on single core CPU's such as K64F
2018-12-04 17:07:28 +02:00
c3bd6f12d2
Fix PSA crypto partiotion and tests
...
* Styling
* Correct error codes on failing connection
* Add panics where needed
* correct skip defines
* Fix psa_spm_init_refence_counter bug
2018-12-04 17:07:28 +02:00
0df1d49ba1
Merge pull request #8861 from VeijoPesonen/bugfix-mbedgt_wifi_scan_one_ssid
...
Bugfix-tests-network-wifi drop the assumption about more than one SSID
2018-12-03 13:34:48 +01:00
ba6b36cb3b
Merge pull request #8754 from itayzafrir/mbed-crypto-tests
...
Mbed Crypto Tests
2018-11-30 14:54:02 +01:00
01301387f8
Run SPM code generator
2018-11-28 14:40:01 +02:00
45bd4f305a
Add SPM code generation test to Travis-CI
2018-11-28 14:38:44 +02:00
52822cb8af
Merge pull request #8871 from c1728p9/mpu
...
MPU API (Reopened)
2018-11-28 10:28:32 +01:00
e62abd8aee
Merge pull request #8804 from mohammad1603/inject_entropy_spm
...
PSA Crypto SPM
2018-11-28 09:40:31 +01:00
e69aa15aea
Merge pull request #8744 from kfnta/psa_spm_base
...
PSA Secure partition manager and services
2018-11-27 15:26:38 +01:00
5f36447eb6
do not run crypto init SPM test if not SPM target
2018-11-27 15:29:14 +02:00
daeb19d167
Fix entropy_inject test compilation
...
Include to crypto.h file will fail on targets without TARGET_PSA support
Moving prerequisites check before include.
2018-11-27 11:57:01 +02:00
abf1ccc722
Disable crypto_init tests when Mbed Crypto is OFF
2018-11-27 11:57:00 +02:00
88f4f48fac
Astyle fixes for the source
...
Used running: astyle -n --options=.astylerc
2018-11-27 11:56:57 +02:00
59c3c9fff7
crypto init with multiple client guard & tests
2018-11-27 11:56:48 +02:00
73cb013ac6
skip inject entropy test if they not supported
2018-11-27 11:56:43 +02:00
73ebe1a247
Fix inject entropy tests
...
* Call greentea_case_teardown_handler() and greentea_case_setup_handler() instead of return STATUS_CONTINUE
* Introduce and use new macro MBEDTLS_PSA_INJECT_ENTROPY_MIN_SIZE
2018-11-27 11:56:37 +02:00
72037747b1
Update auto generated SPM files
2018-11-27 11:56:35 +02:00
1325084b1a
Add tests to PSA entropy injection
2018-11-27 11:56:33 +02:00
f4581faab0
Create a new partition for the crypto service
...
The following files initially were taken
from https://github.com/ARMmbed/psa-crypto-spm/releases/tag/spm-crypto-5.11
* crypto_platform_spe.h
* crypto_struct.h
* crypto_struct_ipc.h
* psa_crypto_spm.c
* crypto_spe.h
* crypto_partition_psa.json
The rest of the files were autimatically generated
by tools/spm/generate_psa_partition.py
2018-11-27 11:56:29 +02:00
1431e216ad
Skip Mbed Crypto tests when when Mbed Crypto is OFF
2018-11-27 11:56:25 +02:00
3e88dcf177
Test modifications
...
* Add support for entropy injection
* Move psa_crypto_init & mbedtls_psa_crypto_free to setup & teardown handlers
* Skip test_crypto_asymmetric_encrypt_decrypt if RSA generation is not supported
2018-11-27 11:54:10 +02:00
7cdfbee28b
Fix asyle problems
...
Run astyle to fix CI failures.
2018-11-27 09:29:33 +00:00
caa7b93921
Rename lock functions and classes
...
Invert the name of the lock functions and classes so you are not
locking a negative.
2018-11-27 09:29:32 +00:00
a7bf312106
Skip MPU fault tests for ARMv8-M
...
For enhanced security ARMv8-M firmware doesn't allow the hardfault
handler to be hooked by non-secure code. Because of this there is no
way to recover from the MPU fault tests. This PR disables those tests
until hardfault recovery is supported by secure firmware.
2018-11-27 09:29:32 +00:00
47ac8ef3f0
Fix MPU test when MemManage fault enabled
...
Hook both the HardFault and the MemManage IRQs since it is up to the
target to determine which fault is enabled.
2018-11-27 09:29:32 +00:00
24f002d6dc
Clear caches before RAM execution in MPU test
...
Ensure that code written to ram is flushed and that caches are cleared
before attempting to executing from ram. This fixes CI failures on the
MPU test when it is built for Cotex-M7 devices such as the
NUCLEO-F746ZG.
2018-11-27 09:29:32 +00:00
1821d37621
Overhaul MPU for new requirements
...
Make the following changes:
-Allow a vector specific ARM MPU driver by defining MBED_MPU_CUSTOM
-Allow ROM address to be configured for ARMv7-M devices by
setting the define MBED_MPU_ROM_END
-Add ROM write protection
-Add new functions and lock
-enable at boot
-disable during flash programming
2018-11-27 09:29:32 +00:00
7283f9b0ee
Add a formal HAL specification for the MPU API
...
Add a formal HAL specification consisting of:
-defined and undefined behavior
-test descriptions
-enable doxygen for MPU
2018-11-27 09:29:32 +00:00
d00f59fdc8
Rework MPU layout for future changes
...
Create a dedicated MPU directory for standard Arm MPU implementations
in preparation for the Arm v8m MPU. Replace MBED_MPU_ENABLED with
DEVICE_MPU to align with the porting layer of other HAL APIs.
2018-11-27 09:29:31 +00:00
c0ff98614a
Disable the MPU when flashing
...
When programming flash using the FlashIAP API allow execution from
ram. Many devices require flashing to be done from RAM.
Also allow execution from ram when running the low level flash tests.
2018-11-27 09:29:31 +00:00
8e2fd1a5cc
Add an MPU test
...
Test that the MPU correctly stops execution of memory in the stack
region, heap region, data region and bss region. Also check that the
MPU can be enabled, disabled and freed.
2018-11-27 09:29:31 +00:00
aea9713c89
Doxygen fixes in tests
2018-11-27 09:16:47 +02:00
773ac8dd95
CR fixes
2018-11-27 09:16:45 +02:00
2b9f94a0ad
Remove dead code
2018-11-27 09:16:45 +02:00
6cd4f7789f
Add Version to SPM templates and generator
2018-11-27 09:16:43 +02:00
53be3cccfc
Fix the SPM HAL test
2018-11-27 09:16:41 +02:00
9cc017fd48
Normalize license headers
...
- add SPDX license identifier
- add missing license headers
- update year in license headers
2018-11-27 09:16:40 +02:00
aea01a86f6
astyle changes
2018-11-27 09:16:38 +02:00
dd73fa689c
PSA SPM
...
* Intorduce PSA-SPM to mbed-os
* Add SPM tests (for PSA targets)
* Add PSA PRoT internal storage Secure implementation
* Integrate SPM into the boot proccess
* PSA manifest data generator
* Introduce PSA targets skeleton to mbed-os
* Add artifact delivery to the tools
2018-11-27 09:16:35 +02:00
7fa969f53d
Add license
2018-11-26 19:23:17 +02:00
c3a8659c0f
Add mbed-crypto key derivation test
2018-11-26 19:23:16 +02:00
680d9830d1
Add mbed-crypto asymmetric sign verify test
2018-11-26 19:23:16 +02:00
ff3a36abcb
Add mbed-crypto symmetric cipher encrypt decrypt test
2018-11-26 19:23:15 +02:00
29bcb2e327
Add mbed-crypto hash verify test
2018-11-26 19:23:14 +02:00
118f353e17
Add mbed-crypto asymmetric encrypt decrypt test
2018-11-26 19:23:14 +02:00
f81bb47ffd
Introduce mbed-crypto tests
...
Add tests setup code and random bytes generator test.
2018-11-26 19:23:13 +02:00
c272377a81
Make sure no memory overhead if statistics are disabled
2018-11-26 09:42:45 -06:00
068f2d14c0
Resolve IAR build issue
...
IAR not able to assign default zero value in array and complaints of
internal error as below:
[ERROR] Internal error: [Front end]: assertion failed at:
"..\..\Translator\compiler_core\src\parser\edg\decl_inits.c", line 2031
2018-11-26 09:42:45 -06:00
117eb0bc87
Add socketstats stub functions for unittest and addressed reviews
2018-11-26 09:42:50 -06:00
f6c1a40b29
Add config options for socket statistics
...
1. MBED_CONF_NSAPI_SOCKET_STATS_ENABLE to enable the statistics
2. MBED_CONF_NSAPI_SOCKET_STATS_MAX_COUNT max sockets statistics cached
2018-11-26 09:42:45 -06:00
a851df66e3
Code/bug after testing
...
1. Fixing astyle and docs
2. Extra mutex lock was removed
3. Bytes are updated when send/recv > 0 and not in case of -ve error
4. Review comments
5. Guard statistics implementation in test with MBED_NW_STATS_ENABLED
2018-11-26 09:42:45 -06:00
eec54a0fc9
Update tcp test cases to verify network socket statistics
...
Cases Updated are:
1. TCPSOCKET_ECHOTEST_NONBLOCK
2. TCPSOCKET_OPEN_CLOSE_REPEAT
3. TCPSOCKET_OPEN_LIMIT
2018-11-26 09:42:45 -06:00
e7ea2927fc
Update udp test cases to verify network socket statistics
...
Cases Updated are:
1. UDPSOCKET_ECHOTEST_NONBLOCK
2. UDPSOCKET_OPEN_CLOSE_REPEAT
3. UDPSOCKET_OPEN_LIMIT
2018-11-26 09:42:45 -06:00
fdca1e3578
Merge pull request #8730 from kfnta/its_kvstore_single_core
...
Add a new PSA Internal Trusted Storage APIs
2018-11-26 11:54:08 +01:00
aa7e1ce0e5
Fix its tests in non-psa targets
2018-11-25 09:57:23 +02:00
9b13e240c3
Add SPDX license identifier
2018-11-25 09:57:23 +02:00
9fa1f5a3d5
astyle changes
2018-11-25 09:57:22 +02:00
53728e45b7
Add a new PSA Internal Trusted Storage APIs
2018-11-25 09:57:22 +02:00
c873dc06f2
Merge branch 'ONME-3983' of https://github.com/mtomczykmobica/mbed-os into dev_rollup
2018-11-24 21:14:47 +00:00
b16569dc3f
Merge pull request #8838 from 0xc0170/dev_rollup
...
Rollup v2 for 5.11rc1
2018-11-24 21:37:02 +01:00
386915deb8
Tests-network-wifi organize test cases for clarity
2018-11-24 12:28:14 +02:00
50bc2e9280
Bugfix - drops the assumption that there is more than SSID in vicinity
2018-11-24 12:20:07 +02:00
52aea31655
Merge pull request #8702 from SenRamakri/sen_CrashReportingImpl
...
Crash Reporting implementation
2018-11-23 20:24:53 +01:00
80ed251c9c
Merge branch 'fix_travis_astyle_files' of https://github.com/0xc0170/mbed-os into dev_rollup
2018-11-23 18:38:13 +00:00
36bc2efdec
Merge branch 'greentea_improvements' of https://github.com/michalpasztamobica/mbed-os into dev_rollup
2018-11-23 18:37:52 +00:00
5b42e2886f
Merge pull request #8607 from aashishc1988/ram_rom_fetch
...
Fetch ram/rom start/size
2018-11-22 10:49:50 +01:00
c1d00df79a
test: fix coding style
2018-11-20 14:50:56 +00:00
00c5b56e32
Merge pull request #8683 from NXPmicro/feature-qspi-lpc546xx
...
Feature qspi lpc546xx
2018-11-19 13:11:44 +00:00
e53ee631f9
Greentea netsocket and network tests improvements
...
Added smarter rounding of times in recv_timeout and increased the delta by one, to allow "off-by-one" errors.
Reverted commit 88eea6a
2018-11-19 08:58:14 +01:00
f59b99d889
Removing support for printing error-report after reboot and other minor fixes
2018-11-18 22:42:37 -06:00
423b52e1c3
Fix crc calculation error, code-style issues and other fixes
2018-11-16 17:24:52 -06:00
4ec30e3e8f
Added greentea test
2018-11-16 14:00:00 -06:00
329c553595
ifdef ram/rom size/start in case they dont exist
2018-11-16 09:38:26 -06:00
6bd0be186b
Add MT25Q Flash config
...
Signed-off-by: Maciej Bociański <maciej.bocianski@arm.com>
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2018-11-16 08:15:48 -06:00
c21c599b25
Update the QSPI unit test for NXP LPC546XX board
...
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2018-11-16 07:56:30 -06:00
5c1c7bf71f
Merge branch 'fix_astyle_error' of ssh://github.com/0xc0170/mbed-os into rollup-b.1
2018-11-15 18:26:09 -06:00
d3812f3740
ONME-3983 Fix the defects found in IPV4 testing against packet dropping
2018-11-15 13:47:43 +01:00
ef728d01dc
tests: fix doxygen style
2018-11-15 07:20:12 +00:00
501bc29426
rtc time test: fix coding style
2018-11-15 07:20:09 +00:00
e3c4dae875
Add tests to verify RAM/ROM sizes
2018-11-14 09:51:53 -06:00
29b7c50e30
ONME-3852 Check that test cases disconnect at the end
2018-11-12 11:29:58 +01:00
9d95d46d6c
Merge pull request #8591 from 0xc0170/fix_coding_style_features
...
features: fix coding style
2018-11-09 09:40:56 -06:00
e635613b28
Merge pull request #7849 from TacoGrandeTX/fix_rtc_settime
...
Low power timer needs to be reset when setting time
2018-11-08 10:50:04 -06:00
3046e31349
Merge pull request #8589 from davidsaada/david_flash_erase_value
...
Support erase value in Flash HAL drivers, FlashIAP and block devices
2018-11-08 10:06:58 -06:00
937d68f0fd
Merge pull request #8645 from mtomczykmobica/ONME-3733
...
Detect xinetd service pattern and generate correct pattern (ONME-3733)
2018-11-08 15:19:19 +01:00
28a5906479
tests: fix coding style
2018-11-08 08:54:34 +00:00
542744d03c
Support erase value in Flash HAL drivers, FlashIAP and block devices
2018-11-07 14:23:07 +02:00
5eabfabc51
ONME-3733 detect xinetd service pattern and generate correct pattern
2018-11-07 13:18:04 +01:00
0de5ab2686
Add a protected HAL set_time() test
...
When DEVICE_LPTICKER is defined set_time() only works correctly on
the first call. This test calls set_time() twice and ensures the
time set by both calls is correct. This test only runs if
DEVICE_RTC or DEVICE_LPTICKER is defined.
2018-11-01 17:17:56 -05:00
e3623b91fa
Increase EMAC test timeout to 1400 seconds
2018-10-31 17:14:05 +02:00
5ed07c2dd4
Merge pull request #8328 from kjbracey-arm/noreturn
...
Error path tightening: use MBED_NORETURN; add+use core_util_atomic_flag
2018-10-29 20:49:54 -05:00
c9eaddd7e0
Merge pull request #8487 from kegilbert/mbed_mem_trace_config_patch2
...
Update mbed_mem_tracing config option
2018-10-29 18:53:25 -05:00
0b27736536
Remove sleep manager tests that trigger mbed_error
...
Intercepting mbed_error will be too hard after mbed_error becomes
[[noreturn]], so remove tests that do this.
2018-10-29 13:58:05 +02:00
1397eb5110
Disable RTOS error tests if error traps are enabled
...
It will be too hard to try to intercept and continue from a trapped
error once error functions are marked [[noreturn]], so make the error
return tests conditional on error trapping being disabled.
2018-10-29 11:56:17 +02:00
a2ac895c37
This reverts commit 9b53d1256fb358407acbaf81c70b71d937b1f7cd.i
...
Move the memory tracing enabled macro to a config option but
revert the !defined -> #if changes to no longer cause breaking
changes.
2018-10-26 17:35:33 -05:00
14ce8f2721
Merge branch 'fix-freestanding-tests-module' of ssh://github.com/pan-/mbed into rollup
2018-10-26 11:42:59 -05:00
f90f1fc01d
sleep test: fix coding style
2018-10-25 09:58:18 +01:00
bbfa322afb
tests: fix astyle
2018-10-25 09:58:17 +01:00
85bd15ce6e
Doxygen: Move free standing HAL tests module inside their related HAL module.
2018-10-24 14:42:29 +01:00
5bed419dd8
Merge pull request #8505 from SeppoTakalo/continue_socket_tests
...
Continue Socket and WiFi tests even on test failure.
2018-10-24 09:40:22 +01:00
0db896036c
Merge pull request #8485 from NXPmicro/feature-qspi-kinetis
...
Feature qspi kinetis
2018-10-23 12:38:11 -05:00
5b7f4a3ed8
Merge pull request #8476 from VeijoPesonen/tc-ipcore-wifi-wifi_connect
...
mbedgt-network-wifi WIFI CONNECT TC - check that SSID is cached
2018-10-23 09:07:25 -05:00
66a2101006
Continue Socket and WiFi tests even on test failure.
...
Purpose is to run full set of testcases on each run.
Testcases should contain proper cleanup handlers so that they are
independent.
2018-10-23 13:58:21 +03:00
b09a843c44
Merge pull request #8482 from adustm/mbedtls_test_fix_typo
...
[tests-mbedtls-multi] Fix typo in the printf (no functional change)
2018-10-22 11:40:15 -05:00
1123c2bf9d
Merge pull request #8377 from mprse/fix_for_issue_8368
...
Fix for issue #8368
2018-10-22 11:32:42 -05:00
86ae041b7a
Update the QSPI unit test for Freescale boards
...
1. Add flash config files.
2. Flash used is MX25U3235F, include information for this
device in the flash config file
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2018-10-19 10:34:12 -05:00
e775990c6a
Fix typo in the printf (no functional change)
2018-10-19 14:15:53 +02:00
f9a723e8ad
mbedgt-network-wifi WIFI CONNECT TC - check that SSID is cached by driver
2018-10-19 09:09:34 +03:00
0823b3ef2d
mbedgt-network-wifi WIFI CONNECT TC - check for empty passwd
2018-10-18 14:12:53 +03:00
9db31d299b
Resolve build issues in test
...
mbed.h was added in test, via greentea and utest header files. 'mbed.h' is removed
from header files and required header file and namespace is added to CPP/C files
2018-10-16 11:50:16 -05:00
ec03df4823
Merge pull request #7980 from kjbracey-arm/thread_deprecations
...
Clean up rtos::Thread deprecation warnings
2018-10-15 10:09:55 -05:00
8bf51be75a
Merge pull request #8230 from mprse/issue_8214_fix
...
Fix for issue #8214
2018-10-12 21:24:08 -05:00
6d7b655b87
Merge pull request #8331 from deepikabhavnani/getc_fix
...
Stream: add necessary flushes, removing unneeded IAR workaround
2018-10-12 08:59:16 -05:00
1ef213ec89
Clean up Thread deprecation warnings
...
Static Thread methods and signal methods have been deprecated. Remove
all references in the main code, and most of the tests. Some tests of
the deprecated APIs themselves remain.
2018-10-12 14:57:13 +03:00
24857d0f91
Merge pull request #5285 from c1728p9/minimum_requirements_test
...
Update devices to have minimum 2K RAM and heap, also added test
2018-10-12 11:04:57 +01:00
4a3bcee602
tests-mbed_hal-rtc_time: use templates instead of global variable
2018-10-11 11:59:01 +02:00
8d57429de4
tests-mbed_hal-rtc_time: alocate required test data on stack
...
This is fix for issue 8368.
Test is causing some problems on `REALTEK_RTL8195AM` and `ARM` compiler. There is some kind of memory issue. Probably there is not enough memory space for global data provided by the test. Data definitions have been moved into test function body so, they will land on stack. With this fix the test works on `REALTEK_RTL8195AM/ARM`.
2018-10-11 11:58:47 +02:00
Filip Jagodzinski
Filip Jagodzinski
Michael Schwarcz
Martin Kojtal
Devaraj Ranganna
Lingkai Dong
Olli-Pekka Puolitaival
Mirela Chirica
Guillermo Alonso
Kevin Bracey
Ryan Morse
Alexander Zilberkant
Anna Bridge
Michal Paszta
Oren Cohen
Tymoteusz Bloch
Cruz Monrreal
Deepika
Qinghao Shi
itayzafrir
Mirela Chirica
Netanel Gonen
Oren Cohen
Mahesh Mahadevan
Oleg Kapshii
kegilbert
Senthil Ramakrishnan
Russ Butler
Maciej Bocianski
Moran Peker
Moran Peker
David Saada
Volodymyr Medvid
Jaeden Amero
Seppo Takalo
Tymoteusz Bloch
Ron Eldor
Amir Cohen
Ari Parkkila
Cai
Amanda Butler
Veijo Pesonen
Alexander Zilberkant
jeromecoutant
Przemyslaw Stekiel
Brian Daniels
Alastair D'Silva
Conrad Braam
Kari Haapalehto
Alex Volinski
mohammad1603
Danny Shavit
Aashish chaddha
Marcin Tomczyk
RFulchiero
Vincent Coubard
adustm