ARMmbed
/
mbed-os
mirror of https://github.com/ARMmbed/mbed-os.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
5,200 Commits
52 Branches
336 Tags
624 MiB
Commit Graph

1882 Commits (09970394da200ece1ed493685623435e6cd71639)

Author SHA1 Message Date
Emilio Monti 1142df8cfd Merge pull request #22 from matthewelse/anotherpullrequest 
PWM Patch Pull Request
 2013-08-07 02:20:51 -07:00
Matthew Else e1eb357c53 Added changes to PWM API from LPC1114 to LPC11C24 2013-08-07 09:45:47 +01:00
Matthew Else b437a3ca22 Removed can_api.c from TARGET_LPC11CXX, as it's not ready for pull request yet. 2013-08-07 09:43:28 +01:00
Toyomasa Watarai 0c0b51f663 Fixed pwm_api bug 
Corrected pwm_timer_map table for LPC1114
 2013-08-07 16:24:58 +09:00
0xc0170 6127ed3bb7 KL25Z adc channels A 
- only channels B were available
 2013-08-06 21:21:03 +02:00
Matthew Else 548d18ebd7 Pull in changes to the main mbed code base. 2013-08-06 20:04:32 +01:00
Matthew Else d29ebefbd9 Begin to add can_api.c to LPC11C24 codebase. Not complete yet, which is why it's #if 0ed out. Lots of build errors come up if #if0 isn't there, which is why it is for now. 2013-08-06 17:41:31 +01:00
Emilio Monti e42786649f The LPC1347 board does not have an interface chip 2013-08-06 16:36:03 +01:00
Matthew Else 45470aba31 Updated READMEs 2013-08-06 15:09:41 +01:00
Matthew Else bf02700a32 Merge https://github.com/jorisa/mbed 2013-08-06 09:43:52 +01:00
Matthew Else f7a2be4bed Merge remote-tracking branch 'upstream/master' 2013-08-06 09:42:09 +01:00
Joris Aerts c747e2533f Rename some argument and enum names to match existing naming 
Add CAN->mode(Mode mode) function (not implemented in hal)
 2013-08-05 17:28:27 -07:00
emilmont 4f03cd09b8 Remove undefined peripherals 2013-08-05 22:09:32 +01:00
0xc0170 e1af24c1f2 Spaces correction 2013-08-05 19:06:22 +02:00
Matthew Else ef28879863 Merged remote tracking branch 'upstream/master' 2013-08-05 17:22:01 +01:00
Matthew Else 2c45596673 Merge https://github.com/jorisa/mbed 2013-08-05 17:11:58 +01:00
Matthew Else 7c8c7228c8 Pushed LPC1114 I2C updates to the LPC11C24 2013-08-05 17:09:22 +01:00
0xc0170 3c0775f5c3 More pin mux options for KL25Z 
- as reported in mbed bug section, add all available mux options
 2013-08-04 21:33:06 +02:00
Emilio Monti 54893092c3 Merge pull request #17 from matthewelse/forpullrequest 
LPC1114 Port Pull Request
 2013-08-02 08:56:44 -07:00
matthewelse 7827d62504 Added alternative DIP package names for pins in the LPC1114 
Added this so it is consistent with the notebook page.
 2013-08-02 10:38:05 +01:00
Joris Aerts f685efa9b2 Merge remote-tracking branch 'upstream/master' 2013-08-01 17:24:20 -07:00
Matthew Else d899612525 Merge branch 'forpullrequest' 2013-08-01 16:25:28 +01:00
Matthew Else 0f7ece02a8 Fixed I2C API 2013-08-01 16:23:13 +01:00
Matthew Else df5c36a9ae Uncommented i2c_wait_SI(obj), as it should not have been commented out. 2013-08-01 16:04:18 +01:00
Matthew Else dc68b76d0f Added timeout for i2c_stop in LPC1114 target. 2013-08-01 15:46:05 +01:00
Joris Aerts a16dc72272 Add @param documentation for new event parameter 
Add clear irq to attach() template function
Call irq_handler for every interrupt set
 2013-07-31 10:45:28 -07:00
Joris Aerts 63b2b271d1 Refactor CAN interrupt handling to LPC176X HAL implementation 
Add handlers for other CAN interrupt events
Changed CAN private entities to protected
 2013-07-31 07:26:32 -07:00
Joris Aerts 8ef8aac36e Merge remote-tracking branch 'upstream/master' 2013-07-30 19:16:34 -07:00
Joris Aerts 51bfe267f4 Add can_t->index to struct and set it during can_init 2013-07-30 15:17:40 -07:00
Matthew Else 07cddbf038 Merge remote-tracking branch 'upstream/master' 2013-07-30 12:01:49 +01:00
Bogdan Marinescu 1cd95c2467 [KL25Z] Fix clock generation for I2C and SPI 
Don't set a clock higher than the one requested for the I2C and SPI interfaces,
even if this setting is the closest to the requested one. This was causing
some issues with the EEPROM test and possibly other issues with the SPI SD test.
 2013-07-29 18:20:04 +03:00
matthewelse 429d2e61eb Enabled CAN for LPC11CXX in device.h 2013-07-29 10:59:18 +01:00
Matthew Else 200b263dcd Added basic stuff necessary to compile for LPC11C24 target. 2013-07-27 18:12:35 +01:00
Matthew Else 153153f261 Added serial_break_clear/serial_break_set 
Fixes #24
 2013-07-26 11:44:09 +01:00
Matthew Else 3172fd97ca Fix both edge bug in gpio_irq_api.c 
Fixes #22
 2013-07-26 09:41:20 +01:00
Matthew Else a356553c7d Fixed incorrect use of static in port_api.c 
This was causing errors when compiling in GCC_ARM
 2013-07-25 16:01:45 +01:00
Matthew Else c3ebd47071 Tidying up gpio_irq_api.c 2013-07-25 10:43:49 +01:00
Matthew Else a7ba27618d Fixed bug in gpio_irq_api 
Test interruptin now works. Fixes #16
 2013-07-25 10:26:46 +01:00
Matthew Else df067bd4e9 Complete support for GPIO interrupts. 2013-07-24 16:02:01 +01:00
Matthew Else 3d08be9700 Attempt to fix the interrupts problem. 2013-07-24 11:00:07 +01:00
Toyomasa Watarai a125a25a97 Implemented PortIn, PortOut and PortInOut API #8 
Followingt test cases have been passed:
* PortOut (#24)
* PortOut PortIn (#9)
* PortInOut (#8)
 2013-07-24 18:37:12 +09:00
matthewelse d67d4f7fc1 Create README.md 2013-07-23 15:54:13 +01:00
Matthew Else 55f91f1da8 Fixed errors in gpio_irq_api.c 2013-07-23 15:44:24 +01:00
Matthew Else c56d1a5236 Fully implemented GPIO_IRQ 
* Removed unused variables/comments.
* As of yet, untested...
 2013-07-23 15:35:38 +01:00
Matthew Else 819ca5547c Removed extraneous comment from the function 2013-07-23 14:21:40 +01:00
Matthew Else 8011992021 Fully implemented gpio_irq_set 2013-07-23 14:19:33 +01:00
Matthew Else fea818fccb Updates to interrupt handling 2013-07-22 13:56:56 +01:00
Matthew Else 1da8e8a2c7 Started to implement gpio_irq_set 2013-07-22 13:30:00 +01:00
Matthew Else 4cf6f09411 Enabled the interrupts api to compile 2013-07-22 12:46:46 +01:00
Toyomasa Watarai 2a989551aa Fixed gpio_api 
Corrected base address of GPIO port register
 2013-07-22 18:53:45 +09:00
Matthew Else 1097af7091 Added DIP package pins to PinNames.h 2013-07-22 09:30:47 +01:00
ytsuboi ca31bda530 Removed printf debug lines 2013-07-22 14:55:19 +09:00
Toyomasa Watarai 794ab9cbd3 Fixed #9 and test ticker test code 
Clean-up GPIO stuff, but it shoud be same behavior as before.
 2013-07-21 23:04:46 +09:00
Matthew Else 84a76cd8d8 Added a load of debug lines 
Basically this outputs a load of stuff to the serial port. I'm just
using this to get an idea of where the error lies within the code...
 2013-07-19 16:56:49 +01:00
Matthew Else 66ca1c9db2 Refactored bits of gpio_api.c 
In between the last two commits, I added debugging lines using serial to
try and locate the line of code that was causing the issues with GPIO.
However, didn't get anywhere with this because the gpio_write function
is defined in a header file, rather than in an implementation file, so
the printf function can't go there. As a result, it's just refactoring.
 2013-07-19 15:23:25 +01:00
Matthew Else a9bb4aa5cb Lots of changes, fixing build bugs and renaming 
Files renamed to fit with the new style folder structure
 2013-07-19 13:59:50 +01:00
Matthew Else 18c291b7ce Added ytsuboi's modifications for using the 1114 2013-07-19 11:24:51 +01:00
Bogdan Marinescu 0c33d40fbb Added support for UART break generation. 2013-07-17 15:29:39 +03:00
samuel.mokrani@arm.com f2ea747280 [LPC1347] Change LED pin names 2013-07-17 15:27:10 +03:00
Bogdan Marinescu 358e84edf3 [LPC1347] Added GPIO interrupts 2013-07-17 15:17:20 +03:00
samuel.mokrani@arm.com 5b0fe44b0d [LPC1347]: first implementation of analogIn (not tested) 2013-07-17 15:17:19 +03:00
samuel.mokrani@arm.com 6b7f4b998e [LPC1347]: first implementation of PWMOut (not tested) 2013-07-17 15:17:09 +03:00
Bogdan Marinescu 721082257c Preliminary support for LPC13XX 
Works only with GCC_ARM for now.
 2013-07-17 14:57:02 +03:00
jesusalvarez 804176b806 Update targets and pins for LPC43xx 2013-07-07 23:27:11 -04:00
0xc0170 43ace93009 removed KL05Z hw tests + mv KL05Z to TARGET_Freescale 2013-07-04 17:57:52 +02:00
0xc0170 551f06b66b Merge branch 'master' into freedomKL05 
Conflicts:
	workspace_tools/toolchains/arm.py
 2013-07-04 17:40:46 +02:00
0xc0170 2b57ae9c23 KL25 + KL05 - no pull down, pullup for INPUT pins by default 
- pull down removal
  - ARMCC - debug information option
 2013-07-03 19:39:19 +02:00
Emilio Monti 597c62e06a Add the vendor name as a proper target label 2013-07-03 17:14:43 +01:00
Helmut Schmucker e38bce5ccd fix for mbed lib issue 1 (i2c problem) 
see also https://mbed.org/users/mbed_official/code/mbed/issues/1
 2013-07-03 16:12:03 +01:00
0xc0170 c1c1102a89 i2c api update 2013-07-02 20:27:20 +02:00
0xc0170 9ff042699b Update freedomKL05 from upstream master 2013-07-02 19:44:15 +02:00
0xc0170 90bb8521aa ADC, code indentation 
- ADC resolution - 12bit, all pins definition
  - code indentation
 2013-07-02 19:34:11 +02:00
Joe Turner fac01e3186 Fix setting GPIO input/output mode. 2013-07-02 10:37:24 +01:00
0xc0170 ed200183d0 RTC OSC32, systemUpdate v0.1 
- RTC clock init from crystal, tested
  - system update function
  - startup - handler PORTB correction
 2013-07-01 21:32:22 +02:00
Emilio Monti 95e66aa4c6 Move the target dependent code from the shared code to the HAL implementation 2013-07-01 18:05:31 +01:00
Bogdan Marinescu 28961db4a5 Added timeout to i2c_stop operations 
Fixes this issue:

http://mbed.org/users/mbed_official/code/mbed/issues/3
 2013-07-01 16:28:35 +01:00
Bogdan Marinescu bfeb47f523 I2C API refactoring 
Now the I2C send/receive functions in the mbed HAL return the number of
bytes actually transferred or an error code (a negative value). The
public API remains unchanged.
 2013-07-01 16:28:32 +01:00
0xc0170 20789374a0 i2C - pulse definition, serial - define correction 2013-06-29 09:10:26 +02:00
0xc0170 7d3864f27b Update KL05 to mbed new structure 2013-06-29 09:08:28 +02:00
Joe Turner 3e40b905f0 Merge branch 'master' of git://github.com/mbedmicro/mbed into STM32F4 
Conflicts:
	workspace_tools/targets.py
 2013-06-26 13:34:34 +01:00
jesusalvarez ecd051c7a1 LPC43xx port from Micromint 2013-06-25 02:20:08 -04:00
Emilio Monti 984ba4b113 Refactor the build system: 
* add sets of TARGET and TOOLCHAIN "labels"
 2013-06-24 14:32:08 +01:00