* Update scatter file for the ARM toolchain to use 2 region memory model.
The scatter file changes affect the following boards:
* LPC1768, ARCH_PRO, UBLOX_C027, XBED_LPC1768 (LPC1768.sct)
* Remove the TOOLCHAIN_ARM_MICRO directory.
* Remove release_version as not necessary and as the target can also run
Mbed OS 6.
* Remove uARM toolchain in the list of supported toolchains for the target.
* Indicate that the target supports the small ARM toolchain C library.
Mbed OS depends on TF-M to implement PSA. Any targets that need to
provide PSA must be supported by TF-M. The following targets are removed
from Mbed OS as they don't yet have TF-M support. We can re-add these
targets to Mbed OS when they have TF-M support in the official upstream
TF-M repository hosted at trustedfirmware.org.
These PSA targets no longer have a PSA implementation and are removed:
- LPC55S69
- LPC55S69_NS
- LPC55S69_S
- NU_PFM_M2351_NS
- NU_PFM_M2351_S
- HANI_IOT
Signed-off-by: Devaraj Ranganna <devaraj.ranganna@arm.com>
Signed-off-by: Jaeden Amero <jaeden.amero@arm.com>
For the application(firmware) booted by bootloader(OTA),
the image doesn't need the "flash_config" and "ivt" header.
So update the link file to support both kinds of application
(firmware) booted by bootROM and bootloader.
In default, the compilation will get the image with
"flash_config" and "ivt" header, for example the bootloader
compiling.
When compiling the OTA application image, please add the
line as below in the mbed_app.json file.
"target.macros_add" : ["MBED_APP_COMPILE"]
This will remove the "flash_config" and "ivt" header in the
final image.
Signed-off-by: Gavin Liu <gang.liu@nxp.com>
Update the flash driver to support both Hyper Flash
and QSPI Flash.
In addition, the static function cannot be linked to
SRAM even defined by AT_QUICKACCESS_SECTION_CODE macro.
So remove all "static" modifier for the FLASHIAP
functions.
Signed-off-by: Gavin Liu <gang.liu@nxp.com>
The memset function from c library will be linked in flash
space, it's risk for FLASHIAP. So I wrote flexspi_memset
to replace the memset for IMX FLASHIAP, and put the function
into targets/.../TARGET_IMX/flash_api.c file. All IMX Soc
platforms can declare it as extern and use in their Soc
flexspi driver files.
Signed-off-by: Gavin Liu <gang.liu@nxp.com>
The flash access may fail when implementing flash
initialization. So there is risk for interrupt handler
which linked in flash space.
Add the critical section to avoid the risk.
Signed-off-by: Gavin Liu <gang.liu@nxp.com>
NXP MIMXRT1050 EVK can support Hyper Flash or QSPI Flash with
small hardware reworks. Modify the XIP file to support boot
from the two kinds of Flash device. The Hyper Flash should be
the default device and defined in tartgets.json with the macro
"HYPERFLASH_BOOT". To select the QSPI Flash, just remove the
macro with the below line in any overriding json file.
"target.macros_remove" : ["HYPERFLASH_BOOT"]
Signed-off-by: Gavin Liu <gang.liu@nxp.com>
Static pinmap extension required to use pin_function() and pin_mode() functions instead of pinmap_pinout(). Unfortunatelly pin_function() does not allow passing NC pin.
Call pin_function() and pin_mode() only if MISO/MOSI pin is not NC.
Remove an obsolete HAL implementation from LPC408X to fix the GCC_ARM
build with the "-flto" flag.
With the lto enabled, unreferenced buffers defined in ethernet_api.c
were not excluded at link time overflowing the 16kB peripheral SRAM1
(ld error: "section '.AHBSRAM1' will not fit in region 'ETH_RAM'").
The Ethernet HAL API is deprecated in favor of EMAC.
1. Do not disable and enable osillators during deep sleep
entry and exit
2. Increase the deep sleep to pass tests
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Martin Kojtal
toyowata
Marcelo Salazar
Hugues Kamba
Devaraj Ranganna
Yoshihiro TSUBOI
Rajkumar Kanagaraj
Gavin Liu
mudassar-ublox
Przemyslaw Stekiel
Filip Jagodzinski
Mahesh Mahadevan