This commit fixes the i2c driver issue reported in the below link:
https://github.com/ARMmbed/mbed-os/issues/13967 on STM32F4xx platform.
The data type of XferOperation has been changed from uint8_t to uint32_t
so that it can hold a 32bit value (for example: I2C_OTHER_FRAME or
I2C_OTHER_AND_LAST_FRAME).
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
dac_write (used by AnalogOut.write) calls HAL_DAC_Start
every time. It is required to call HAL_DAC_Start only once.
HAL_DAC_Start uses internally HAL_Delay(1) making AnalogOut
not suitable for use in high speed application.
This change removes call to HAL_DAC_Start in dac_write and
moves it to analogout_init.
Refactor all ST targets to be CMake buildsystem targets. This removes
the need for checking MBED_TARGET_LABELS repeatedly and allows us to be
more flexible in the way we include MBED_TARGET source in the build.
A side effect of this is it will allow us to support custom targets
without breaking the build for 'standard' targets, as we use CMake's
standard mechanism for adding build rules to the build system, rather
than implementing our own layer of logic to exclude files not needed for
the target being built. Using this approach, if an MBED_TARGET is not
linked to using `target_link_libraries` its source files will not be
added to the build. This means custom target source can be added to the
user's application CMakeLists.txt without polluting the build system
when trying to compile for a standard MBED_TARGET.
Add license identifier to files which Arm owns the copyright to,
and contain either BSD-3 or Apache-2.0 licenses. This is to address
license errors raised by scancode analysis.
Workaround a bug where the boot stack size configuration option is not
passed on to armlink, the Arm Compiler's linker. Prefer
MBED_CONF_TARGET_BOOT_STACK_SIZE if present, as this is what the
configuration system should provide. Fall back to MBED_BOOT_STACK_SIZE
if MBED_CONF_TARGET_BOOT_STACK_SIZE is not defined, as in the case of
buggy tools. If both MBED_CONF_TARGET_BOOT_STACK_SIZE and
MBED_BOOT_STACK_SIZE are not defined, then we fall back to a hard-coded
value provided by the linkerscript. See
https://github.com/ARMmbed/mbed-os/issues/13474 for more information.
To allow overriding of the boot stack size from the Mbed configuration
system, consistently use MBED_CONF_TARGET_BOOT_STACK_SIZE rather than
MBED_BOOT_STACK_SIZE.
Fixes#10319
- PHY default configuration can be changed
- AutoNegotiation
- Speed
- DuplexMode
- PHY register offset can be updated depending on chosen PHY
All unused parameters are cleaned.
- By default, Mbed OS build tools use standard C library for all supported toolchains.
It is possible to use smaller C libraries by overriding the "target.default_lib" option
with "small". This option is only currently supported for the GCC_ARM toolchain.
This override config option is now extended in the build tool for ARM toolchain.
- Add configuration option to specify libraries supported for each toolchain per targets.
- Move __aeabi_assert function from rtos to retarget code so it’s available for bare metal.
- Use 2 memory region model for ARM toolchain scatter file for the following targets:
NUCLEO_F207ZG, STM32F411xE, STM32F429xI, NUCLEO_L073RZ, STM32F303xE
- Add a warning message in the build tools to deprecate uARM toolchain.
- NewLib-Nano C library is not supporting floating-point and printf with %hhd,%hhu,%hhX,%lld,%llu,%llX
format specifier so skipping those green tea test cases.
Martin Kojtal
Mohammed Mubeen
anish-k
Mohammed Mubeen
pennam
jeromecoutant
Krishna Mohan Dani
Anna Bridge
George Psimenos
Marek Czerski
Ladislas de Toldi
Robert Walton
Stefan Staub
pea-pod
reme
Harrison Mutai
Jaeden Amero
Rajkumar Kanagaraj