Set the ISR stack to be 1KB. https://github.com/ARMmbed/mbed-os/pull/7238
Set the heap size to 3KB(2KB + overhead + spare) so that atleast 2KB free ram is
available for testing.
With dynamic heap size, explicit size is not required. IAR 7.8 supports
static heap, hence the change is needed in IAR linker files.
--legacyalign, --no_legacyalign are deprecated from ARMC6 compiler, in order to
remove deprecated flags all linker files (GCC and IAR as well to have uniformity)
should strictly align to 8-byte boundary
Replace wait_us with nu_busy_wait_us in lp_ticker since wait_us is not allowed in sleep test
which would suspend us ticker layer on which wait_us relies. nu_busy_wait_us is implemented
by calling us ticker HAL API directly rather than relying on us ticker layer.
1. Modify PinMode enum to fully support GPIO I/O modes.
2. Translate input pull mode/direction to I/O mode, where H/W doesn't support
separate configuration for input pull mode/direction.
3. Allow for configuring I/O mode in addition to input pull mode.
If us_ticker/lp_ticker is scheduled and then the interrupt is disabled, the originally scheduled
interrupt may still become pending. If this occurs, then an interrupt will fire twice on the next
call to us_ticker_set_interrupt/lp_ticker_set_interrupt - once immediately and then a second time
at the appropriate time.
This patch prevents the first interrupt by clearing interrupts in
us_ticker_set_interrupt/lp_ticker_set_interrupt before calling NVIC_EnableIRQ.
This change is to reduce delay of wake-up from power-down to pass Greentea test.
Because HIRC's accuracy is worse than HXT's, we must switch back to HXT for e.g. USBD application.
This can be done through setting NU_CLOCK_PLL to NU_HXT_PLL.
1. Introduce S/W interrupt enable/disable to reduce calls to TIMER_EnableInt/TIMER_DisableInt.
2. Allow dummy interrupt because clear interrupt flag is not synchronized.
3. Enable LPTICKER_DELAY_TICKS to make lp_ticker_set_interrupt non-blocking.
IAR 7.8 does not support dynamic heap, and some test/addition of new
feature fail on this device because of less static RAM memory.
Reducing the heap memory size for the same reason.
1. Disable unnecessary TX/RX threshold interrupts to avoid potential trap in DMA transfer
2. Start TX/RX DMA transfer simultaneously to fit H/W spec and avoid potential RX FIFO overflow issue
Originally, we use 2 H/W timers for us_ticker/lp_ticker, one for counting and the other for alarm.
With H/W timer running in continuous mode, we could use just one H/W timer for counting/alarm simultaneously.
The rework includes the following:
1. Remove ticker overflow handling because upper layer (mbed_ticker_api.c) has done with it.
This makes us_ticker/lp_ticker implementation more succinct and avoids potential error.
2. Refine timer register access with low-power clock source
Deepika
ccli8
Oren Cohen
Cruz Monrreal
Bartek Szatkowski
Jimmy Brisson
Cruz Monrreal
cyliangtw
Martin Kojtal
Przemyslaw Stekiel