When UART interrupt enabled and WDT reset from power-down mode, in the next
cycle, UART interrupt keeps breaking in and cannot block unless via NVIC. To
get around it, we deliberately make up a signal of WDT wake-up from power-down
mode in the start of boot proces when WDT reset is detected.
In no MISO case, skip SPI read so that no more write/read delay contribute to SPI inter-frame delay when data is written successively.
Update targets:
- NUMAKER_PFM_NANO130
- NUMAKER_PFM_NUC472
- NUMAKER_PFM_M453
- NUMAKER_PFM_M487/NUMAKER_IOT_M487
- NU_PFM_M2351_*
- NUMAKER_IOT_M263A
- NUMAKER_M252KG
Add a "used" attribute to __vector_handlers to fix ARMC6 build with
the "-flto" flag.
(Error: L6236E: No section matches selector - no section to be FIRST/LAST. )
This attribute, attached to a function/variable, means that code must be emitted
for the function even if it appears that the function is not referenced.
Add a "used" attribute to Reset_Handler_Cascade to fix GCC build with
the "-flto" flag.
This attribute, attached to a function, means that code must be emitted
for the function even if it appears that the function is not referenced.
On IAR, configure heap to 1KiB at a minimum and expandable, dependent on available SRAM. This requires IAR 8.x.
Support targets:
- NUMAKER_PFM_NUC472 w/ and w/o XRAM
- NUMAKER_PFM_M453
- NUMAKER_PFM_M487/NUMAKER_IOT_M487
- NUMAKER_IOT_M263A
- NUMAKER_M252KG
These targets below just support PRNG, not real TRNG. They cannot annouce TRNG.
- NUMAKER_PFM_NUC472
- NUMAKER_PFM_M487
- NUMAKER_IOT_M487
On targets without TRNG, to run mbedtls applications which require entropy source,
there are two alternatives to TRNG:
- Custom entropy source:
Define MBEDTLS_ENTROPY_HARDWARE_ALT and provide custom mbedtls_hardware_poll(...)
- NV seed:
1. Define MBEDTLS_ENTROPY_NV_SEED
2. Define MBEDTLS_PLATFORM_NV_SEED_READ_MACRO/MBEDTLS_PLATFORM_NV_SEED_WRITE_MACRO and provide custom mbedtls_nv_seed_read(...)/mbedtls_nv_seed_write(...).
3. Don't define MBEDTLS_PSA_INJECT_ENTROPY. Meet mbedtls_psa_inject_entropy(...) undefined and then provide custom one, which must be compatible with mbedtls_nv_seed_read(...)/mbedtls_nv_seed_write(...) above.
4. For development, simulating partial provision process, inject entropy seed via mbedtls_psa_inject_entropy(...) pre-main.
Without free-up of peripheral pins, peripheral pins of the same peripheral may
share by multiple ports after port iteration, and this peripheral may fail with
pin interference.
In Nuvoton, only new-design chips support GPIO input pull-high/pull-low modes.
Targets not supporting this feature are listed below:
- NUMAKER_PFM_NANO130
- NUMAKER_PFM_NUC472
- NUMAKER_PFM_M453
Fix logic error on replying NACK at the end of transfer.
This is also to fix FPGA CI test mbed_hal_fpga_ci_test_shield-i2c/
i2c - test single byte read i2c API.
Better IP initialization sequence:
1. Configure IP pins
2. Select IP clock source and then enable it
3. Reset the IP (SYS_ResetModule)
NOTE1: IP reset takes effect regardless of IP clock. So it doesn't matter if
IP clock enable is before IP reset.
NOTE2: Non-configured pins may disturb IP's state, so IP pinout first and then
IP reset.
NOTE3: IP reset at the end of IP initialization sequence can cover unexpected
situation.
Reimplement atomic code in inline assembly. This can improve
optimisation, and avoids potential architectural problems with using
LDREX/STREX intrinsics.
API further extended:
* Bitwise operations (fetch_and/fetch_or/fetch_xor)
* fetch_add and fetch_sub (like incr/decr, but returning old value -
aligning with C++11)
* compare_exchange_weak
* Explicit memory order specification
* Basic freestanding template overloads for C++
This gives our existing C implementation essentially all the functionality
needed by C++11.
An actual Atomic<T> template based upon these C functions could follow.
Instead of user defined symbols in assembly files or C files,
use linker scripts to add heap and stack - this is inconsistent
with ARM std linker scripts
1. For SHA AC, use atomic flag to manage its ownership.
(1) Nuvoton SHA AC doesn't support SHA context save & restore, so S/W
SHA fallback has been supported before. To make non-blocking 'acquire'
semantics clearer, introduce 'try_acquire' to substitute for 'acquire'.
(2) No biting CPU due to mechanism above.
(3) No deadlock due to mechanism above.
2. For AES/DES/ECC AC, change to mutex to manage their ownership.
(1) Change crypto-misc.c to crypto-misc.cpp to utilize C++ SingletonPtr
which guarantees thread-safe mutex construct-on-first-use.
(2) With change to crypto-misc.cpp, add 'extern "C"' modifier to CRYPTO_IRQHandler()
to avoid name mangling in C++.
(3) No priority inversion because mutex has osMutexPrioInherit attribute
bit set.
(4) No deadlock because these AC are all locked for a short sequence
of operations rather than the whole lifetime of mbedtls context.
(5) For double mbedtls_internal_ecp_init() issue, it has been fixed in upper
mbedtls layer. So no need to change ecc init/free flow.
With support for checking H/W UART initialized or not, we can simplify stdio management:
1. When serial_init(&stdio_uart) calls in, just set the 'stdio_uart_inited' flag.
2. When serial_free(&stdio_uart) calls in, just clear the 'stdio_uart_inited' flag.
Except above, we needn't make special handling with 'stdio_uart'.
The same H/W UART may be shared by multiple serial_t objects. This fix tries to avoid
re-configuring the same H/W UART in serial_init() when there are multiple serial_t
objects constructed. To re-configure UART, call serial_baud() and serial_format()
explicitly. This can avoid confusion when e.g. a newly constructed serial_t object
changes baudrate unexpectedly in serial_init().
--legacyalign, --no_legacyalign are deprecated from ARMC6 compiler, in order to
remove deprecated flags all linker files (GCC and IAR as well to have uniformity)
should strictly align to 8-byte boundary
Replace wait_us with nu_busy_wait_us in lp_ticker since wait_us is not allowed in sleep test
which would suspend us ticker layer on which wait_us relies. nu_busy_wait_us is implemented
by calling us ticker HAL API directly rather than relying on us ticker layer.
If us_ticker/lp_ticker is scheduled and then the interrupt is disabled, the originally scheduled
interrupt may still become pending. If this occurs, then an interrupt will fire twice on the next
call to us_ticker_set_interrupt/lp_ticker_set_interrupt - once immediately and then a second time
at the appropriate time.
This patch prevents the first interrupt by clearing interrupts in
us_ticker_set_interrupt/lp_ticker_set_interrupt before calling NVIC_EnableIRQ.
1. Modify PinMode enum to fully support GPIO I/O modes.
2. Translate input pull mode/direction to I/O mode, where H/W doesn't support
separate configuration for input pull mode/direction.
3. Allow for configuring I/O mode in addition to input pull mode.
1. Introduce S/W interrupt enable/disable to reduce calls to TIMER_EnableInt/TIMER_DisableInt.
2. Allow dummy interrupt because clear interrupt flag is not synchronized.
3. Enable LPTICKER_DELAY_TICKS to make lp_ticker_set_interrupt non-blocking.
Chun-Chieh Li
Przemyslaw Stekiel
Maciej Bocianski
Filip Jagodzinski
Martin Kojtal
int_szyk
Kevin Bracey
Shrikant Tudavekar
deepikabhavnani
Cruz Monrreal
Russ Butler
Senthil Ramakrishnan
Yossi Levy
Oren Cohen
Bartek Szatkowski