issue: #31480#31481
pr: #31540
release duplicate l0 segment task, which execute on old delegator may
cause segment lack, and execute on new delegator may break new
delegator's leader view.
This PR skip release duplicate l0 segment by segment_checker, cause l0
segment will be released with unsub channel
---------
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
Cherry-pick from master
pr: #31616
See also #28491#31240
When colleciton number is large, querycoord saves collection target one
by one, which is slow and may block querycoord exits.
In local run, 500 collections scenario may lead to about 40 seconds
saving collection targets.
This PR changes the `SaveCollectionTarget` interface into batch one and
organizes the collection in 16 per bundle batches to accelerate this
procedure.
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
Cherry-pick from master
pr: #31486
Related to #27349
See also #30816
Level zero is not allowed to balance among delegators, they shall always
serve current delegator. This PR releases all level zero segments after
channel is unsubscribed and preventing level zero segment blocking
graceful stop.
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
Cherry-pick from master
pr: #31438
"-1" as `InvalidPartitionID` previously used as All partition place
holder in delete cases. It's confusing and hard to maintain when a const
var has more than one meaning.
This PR add `AllPartitionsID` to replace these usages in delete
scenarios.
---------
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
Cherry-pick from master
pr: #31473
See also #31470#31506
This PR adds nodeID assignment verification before updating channel
checkpoints.
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
issue: #30931
pr: #31050
- move resource estimate function outside from segment loader.
- add load info and collection to base segment.
- add resource usage method for sealed segment.
Signed-off-by: chyezh <chyezh@outlook.com>
issue: #30816
pr: #31430
pr #31319 introduce the logic that segment checker need to load level
zero segment which only exist in current target.
This PR fix load segment task promote failed when segment only belongs
to current target
---------
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
issue: #31162
pr: #31379
when give scope CurrentTargetFirst/NextTargetFirst, it's expected to
scan both current and next target.
This PR fixed wrong behavior of CurrentTargetFirst/NextTargetFirst in
target manager, which may cause unexpected task generated, and load
collection may stuck forever due to dirty leader view.
---------
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
issue: #31351
pr: #31380
This PR fixed that search/hybrid_search doesn't expire shard leader
cache when send request to query node failed, which make every request
keep trying to connect a offline query node
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
Cherry-pick from master
pr: #31363
See also #31362
This PR make datacoord garbage collection scan operation using differet
interval than other opeartion.
This interval is a newly added param item, which default value is 7*24
hours.
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
issue: #30186
pr: #31319
during channel balance, after new delegator loaded, instead of syncing
l0 segment's location to new delegator, we should load l0 segment on new
delegator, and release the old l0 segment, then start to release old
delegator.
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
issue: #28491
pr: #31315
should save target to meta store after target observer stop, incase of
target changed
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
fix: [restful v2] create a collection with vector field name
master pr: #31317
1. quickly create collection, create an index on the vector field #31149
2. valid consistencyLevel is needed, while create a collection
3. show collection's properties and aliases #31180
4. list aliase for one collection, default is the whole database
Signed-off-by: PowderLi <min.li@zilliz.com>
See also #31289
This PR:
- Set collection level `QueryNodeEntitiesSize` to zero if all segment
released
- Delete `QueryNodeEntitiesSize` metrics value after collection ref is
zero
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
issue: #28491
after querycoord restart, it will pull a new target, which include
channel and segment list. when segments loaded on querynode has reached
the target, the collection could provide search/query. but if segment
list changes by time, ater querycoord pull a new target, it will takes a
few minutes to catch up the target's segment distribution. and before
that, query/search will fail due to lack of segments.
This PR save the current loaded target to meta storein querycoord's stop
progress, and recover it when query coord starts, to speed up the target
recovery time.
---------
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
issue: #30531
cause get client from `shardClientMgr`, doesn't means query node is
unavailable. because of the ref counter policy in `shardClientMgr`,
which will clean the client, if no collection use qn as shard leader.
This PR fix that set node unreachable when get shard client failed.
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
issue: #31222
grpcclient's `call` func return a unrecoverable error, then the caller's
retry policy also breaks due to this unrecoverable error.
This PR introduce `retry.Handle`, the new func use `func() (bool,
error)` as input parameters, which return `shouldRetry` directly, to
avoid grpcclient return a unrecoverable error
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
With the presence of L0 segments, there's no longer a need to add import
segments to the datanode.
issue: https://github.com/milvus-io/milvus/issues/28521
---------
Signed-off-by: bigsheeper <yihao.dai@zilliz.com>
1. complete the output of describe collection #31180
2. add a new parameter `params` for create collection #31181#31149
3. create index according to indexConfig while create collection #31199
4. autoID: false while create a collection quickly, take upsert into
consideration
5. polish error information while search without annsField #31010
fix: [restful v1] insert / upsert with default partitionName JIRA-4952
---------
Signed-off-by: PowderLi <min.li@zilliz.com>
add sparse float vector support to different milvus components,
including proxy, data node to receive and write sparse float vectors to
binlog, query node to handle search requests, index node to build index
for sparse float column, etc.
https://github.com/milvus-io/milvus/issues/29419
---------
Signed-off-by: Buqian Zheng <zhengbuqian@gmail.com>
issue: https://github.com/milvus-io/milvus/issues/31169
also properly handling index build error by re-create a new index so
that nothing will be left in the previous failed index build attempt.
Signed-off-by: Buqian Zheng <zhengbuqian@gmail.com>
1. The Import APIs now provide detailed progress information for each
imported file, including details such as file name, file size, progress,
and more.
2. The APIs now return the collection name and the completion time.
3. Other modifications include changing jobID to jobId and other similar
adjustments.
issue: https://github.com/milvus-io/milvus/issues/28521
---------
Signed-off-by: bigsheeper <yihao.dai@zilliz.com>
issue: #30816
cause balance channel will stuck until leader view catch up the current
target, then start to unsub the old delegator. which make sure that the
new delegator can provide search before release old delegator. but
another logic in segment_checker skip loading segment during balance
channel. so during balance channel, if query node crash, new delegator
can't catch up target forever, then stuck forever.
This PR remove the rule that skip loading segment during balance channel
to avoid the logic dead lock here.
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
1. File type validation is omitted during binlog import.
2. System fields are appended to the schema during binlog import.
issue: https://github.com/milvus-io/milvus/issues/28521
Signed-off-by: bigsheeper <yihao.dai@zilliz.com>
This PR adds the ability to search/get sparse float vectors in segcore,
and added unit tests by modifying lots of existing tests into
parameterized ones.
https://github.com/milvus-io/milvus/issues/29419
Signed-off-by: Buqian Zheng <zhengbuqian@gmail.com>
issue: #30983#30982
cause balancer call wrong interface to get segment/channel list in
replica, then got a wrong average segment/channel number, which make
each node have less segment/channel than average, and the balance won't
be trigger in multi replica case.
This PR fix that balance segment/channel won't be trigger on multi
replicas
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
issue: #31109
This PR remove duplicate target node id check, due to server id has
already been checked in rpc's interceptor
---------
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
This commit adds sparse float vector support to segcore with the
following:
1. data type enum declarations
2. Adds corresponding data structures for handling sparse float vectors
in various scenarios, including:
* FieldData as a bridge between the binlog and the in memory data
structures
* mmap::Column as the in memory representation of a sparse float vector
column of a sealed segment;
* ConcurrentVector as the in memory representation of a sparse float
vector of a growing segment which supports inserts.
3. Adds logic in payload reader/writer to serialize/deserialize from/to
binlog
4. Adds the ability to allow the index node to build sparse float vector
index
5. Adds the ability to allow the query node to build growing index for
growing segment and temp index for sealed segment without index built
This commit also includes some code cleanness, comment improvement, and
some unit tests for sparse vector.
https://github.com/milvus-io/milvus/issues/29419
Signed-off-by: Buqian Zheng <zhengbuqian@gmail.com>
See also #31143
This PR add short cut for datanoe metacache `WithSegmentIDs` filter,
which could just fetch segment from map with provided segmentIDs. Also
add benchmark for new implementation vs old one.
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
Replacing the current import API v1 implementation with the v2
implementation.
issue: https://github.com/milvus-io/milvus/issues/28521
---------
Signed-off-by: bigsheeper <yihao.dai@zilliz.com>
This PR add metrics for load segment progress:
1. add metrics for load segment/index concurrency
2. add metrics for load index latency
3. change load segment latency's time unit to ms
---------
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
issue: #30890
when leader checker find that leader view has an older load version of
segment, it will try to correct leader view. but the sync action doesn't
specify the latest load version. so the update operation will failed.
This PR fix leader checker can't update segment's load version and
keeping generate same task to scheduler.
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
See also #31125
Delegator shall build level zero delete cache from l0 segments belongs
to it. Previously it build cache from all existing level zero segments
in the querynode which may lead to high memory usage and even panicking
when pk types are not matched
---------
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
See also #31103
Since querycoord need index meta information from datacoord only, broker
shall use `ListIndexes` to skip segment index building check logic in
datacoord
This PR is also related to #30538, in which DescribeIndex caused lots of
memory usage and lead to OOM eventually
---------
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
This PR includes the following adjustments:
1. To prevent channelCP update task backlog, only one task with the same
vchannel is retained in the updater. Additionally, the lastUpdateTime is
refreshed after the flowgraph submits the update task, rather than in
the callBack function.
2. Batch updates of multiple vchannel checkpoints are performed in the
UpdateChannelCheckpoint RPC (default batch size is 128). Additionally,
the lock for channelCPs in DataCoord meta has been switched from key
lock to global lock.
3. The concurrency of UpdateChannelCheckpoint RPCs in the datanode has
been reduced from 1000 to 10.
issue: https://github.com/milvus-io/milvus/issues/30004
---------
Signed-off-by: bigsheeper <yihao.dai@zilliz.com>
Co-authored-by: jaime <yun.zhang@zilliz.com>
Co-authored-by: congqixia <congqi.xia@zilliz.com>
See also #31103
This PR add `listIndexes` API for datacoor server to list all indexes
for provided collection.
Comparing to the existing `DescribeIndex` API, the new one does NOT
check the segment index building progress to ease the burden when
invoking it
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
Define FieldValue, FieldStats, PartitionStats
FieldValue is largely copied from PrimaryKey
FieldStats is largely copied from PrimaryKeyStats
PartitionStats is map[segmentid][]FieldStats
Each partition can have a PartitionStats file
/kind feature
related: #30287
related: #30633
---------
Signed-off-by: wayblink <anyang.wang@zilliz.com>
Skip partition key naming & hash value pre process if collection schema
does not have partition key
The PR removes mislead warning when collection has no partition key
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
Trigger l0 compaction when l0 views don't change
So that leftover l0 segments would be compacted in the end.
1. Refresh LevelZero plans in comactionPlanHandler, remove the meta
dependency
of compaction trigger v2
2. Add ForceTrigger method for CompactionView interface
3. rename mu to taskGuard
4. Add a new TriggerTypeLevelZeroViewIDLE
5. Add an idleTicker for compaction view manager
See also: #30098, #30556
Signed-off-by: yangxuan <xuan.yang@zilliz.com>
---------
Signed-off-by: yangxuan <xuan.yang@zilliz.com>
Segment load memory usage is underestimated due to removing the load
memroy factor. This PR adds it back to protect querynode OOM during some
extreme memory cases.
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
issue: #20553
This PR add retry on all interface which belong to indexcoord in milvus
2.2 and. move to data coord in milvus 2.3, to prevent meet
`unimplemented` error during rolling upgrade from milvus 2.2 to 2.3.
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
issue: #30980#22837
2.3 pr: #30873
should use GetBFloat16Field, GetBfloat16Field rather than GetBinaryField
Signed-off-by: PowderLi <min.li@zilliz.com>
In the cache of the timeTickSender, retain only the latest stats instead
of storing stats for every time tick.
issue: https://github.com/milvus-io/milvus/issues/30967
---------
Signed-off-by: bigsheeper <yihao.dai@zilliz.com>
This PR introduces novel managerial roles for importv2:
1. ImportMeta: To manage all the import tasks;
2. ImportScheduler: To process tasks and modify their states;
3. ImportChecker: To ascertain the completion of all tasks and instigate
relevant operations.
issue: https://github.com/milvus-io/milvus/issues/28521
---------
Signed-off-by: bigsheeper <yihao.dai@zilliz.com>
Jiquan Long
cai.zhang
congqixia
wei liu
Bingyi Sun
groot
zhagnlu
chyezh
yihao.dai
Alexander Guzhva
cqy123456
XuanYang-cn
Xiaofan
sammy.huang
PowderLi
liliu-z
Buqian Zheng
Gao
jaime
smellthemoon
Chun Han
Cai Yudong
sre-ci-robot
Ted Xu
presburger
aoiasd
wayblink