* chore: add scaffolding for naive solution
* feat: test case scaffolding
* fix: implement check for series key before proceeding
* fix: add validation for ReadSeriesKeyMeasurement usage
* refactor: explicit use of series key len
* feat: add remaining check to index
* feat: add check to remaining files
As the Len function is used as part of the parseSeriesKey, this also needs to be accounted for on the nil return from this function as it is used in different contexts
* feat: expand test cases
* chore: go fmt
* chore: update test failure message
* chore: impl feedback on unnecessary sz checks
* feat: expand test cases
* fix: nil series key check
In both sections for index.go there is a pre-existing length check against the series key which should catch invalid values, perhaps this explains why it hasn't cropped up in the reported panics. For even more safety, we can also skip a nil key because we know that subsequent calls will cause a panic where this key is attempted to be used
* fix: remove nil tags check
A key with no tags is valid, so we should not check for BOTH nil key and tags as a key could be nil, which is invalid, yet still have tags and therefore cause the check to pass which we do not want
* feat: extend test cases from feedback
* fix: extend checks for CompareSeriesKeys
* feat: add nilKeyHandler for shared key checking logic
* fix: logical error in nilKeyHandler
Prior to this, the else was always defaulted to at the end of the conditional branch, which causes unexpected behaviour and a failure of a bunch of tests.
* fix: return tags keep nil data
In a recent change to this, we agreed on a simple name == nil check for the actual data. As a follow on to this, I just realised that we don't actually want to nil back the tags, even if they're not checked, because having no tags is a valid input so we can simply return whatever we were passed unchanged.
* fix: use len == 0 for extra safety
* feat: extra test for blank series key
Under certain circumstances, the retention service can fail to delete shards from
the store in a timely manner. When the shard groups are pruned based on age, this
leaves orphaned shard files on the disk. The retention service will then not attempt
to remove the obsolete shard files because the meta store does not know about them.
This can cause excessive disk space usage for some users.
This corrects that by requiring shards files be deleted before they can be removed
from the meta store.
Backport via clean cherry-pick of #24530.
fixes: #24543
(cherry picked from commit 7bd3f89d18)
Some series files which are smaller than the standard
sizes cause SIGBUS in influx_inspect and influxd, because
entry iteration walks onto mapped memory not backed by the
the file. Avoid walking off the end of the file while
iterating series entries in oddly sized files.
closes https://github.com/influxdata/influxdb/issues/24508
Co-authored-by: Geoffrey Wossum <gwossum@influxdata.com>
(cherry picked from commit 969abf3da2)
closes https://github.com/influxdata/influxdb/issues/24510
* chore: delete unused signing script
* fix: execute "compact-series-file" at startup
* fix: add "INFLUXD_OPTS" to "influxd config" line
* fix: use CONFIG to store influxd config path
Series file indices monotonically grew even
when series were deleted. Also stop
ignoring error in series index recovery
Partially closes https://github.com/influxdata/EAR/issues/3643
(cherry picked from commit 53856cdaae)
The CLI code used a single function from the `golang.org/x/crypto/ssh/terminal`
package (`terminal.IsTerminal`) which is just a wrapper around the
`golang.org/x/term` package's `term.IsTerminal` function. Replacing this
call prevents unnecessary and non-FIPS crypto functions from being pulled
into the binary.
Backport of #24306closes: #24037
(cherry picked from commit 955f78a2cd)
The CLI code used a single function from the `golang.org/x/crypto/ssh/terminal`
package (`terminal.IsTerminal`) which is just a wrapper around the
`golang.org/x/term` package's `term.IsTerminal` function. Replacing this
call prevents unnecessary and non-FIPS crypto functions from being pulled
into the binary.
Backport of #24306closes: #24037
(cherry picked from commit 955f78a2cd)
* feat: include `crypto` diagnostics in `/debug/vars` output
Pulls `crypto` diagnostics and includes them in `/debug/vars` output.
If no `crypto` diagnostics are available, then OSS crypto information will
be shown instead.
closes: #23947
* chore: upgrade Go to 1.19.3
This re-runs ./generate.sh and ./checkfmt.sh to format and update
source code (this is primarily responsible for the huge diff.)
* fix: update tests to reflect sorting algorithm change
* feat: upgrade flux to 0.171.0
Tests failing, safety commit
First step in https://github.com/influxdata/influxdb/issues/23815
* fix: remove "org" parameter" from writeOptSource
I attempted to implement the "orgOpt" argument in a similar fashion
to f6669f7512. However, it looks like Flux doesn't accept "org" as
a parameter to "load". It responds with:
Error calling function \"load\" @113:16-113:30: error calling function \"to\" @6:19-6:47: unused arguments [org]
This brings us from 194 passing to 570 passing.
* fix: temporarily disable broken flux tests
These tests expect rows to be stored in a certain order. However,
nothing is specifying the sort order. This has been fixed in a
later update to flux: (see 3d6f47ded).
Temporarily disable these tests until we include a fixed
version of the flux tests.
* chore: add tests from a492993012
This fixes "test-flux.sh" so it runs tests within the "flux/"
directory. This uncovered some other issues with the tests
located within "flux/". These also needed to be updated
to match the newer flux API.
* feat: upgrade flux to 0.172.0
This includes changes made in "cbbf4b27da". Since "test.go" in 2.x
diverged from 1.x, some modifications were required to make this
compatible.
* feat: upgrade flux to 0.173.0
* feat: upgrade flux to v0.174.0
* fix: Update the condition when reseting cursor (#23522)
Filters that contain `or` may change between cursor resets so we must remember to update the condition in the read cursor.
```flux
|> filter(fn: (r) => ((r["_field"] == "field1" and r["_value"]==true) or (r["_field"] == "field2" and r["_value"] == false)))
```
Closes https://github.com/influxdata/flux/issues/4804
* feat: upgrade flux to 0.174.1
* feat: upgrade flux to 0.175.0
* chore: remove end-to-end tests
These were removed in a492993 for 2.x. These tests prevent "go test ./..."
from completing. As stated in the original commit, these tests should now be
handled by the "fluxtest" harness.
* feat: upgrade flux to 0.176.0
Some tests needed to be disabled within the flux harness. This is a
result of enabling "Optimize Aggregate Window" in flux@05a1065f.
These tests are not present in 2.x. Therefore, I am unsure if
the breakage is resolved in a later commit.
* feat: upgrade flux to 0.177.0
* feat: upgrade flux to 0.178.0
* feat: upgrade flux to v0.179.0
This removes all invocations of "flux.RegisterOpSpec". According
to flux@e39096d5, "flux.RegisterOpSpec" does nothing in the
current version of flux and was removed.
* chore: update fluxtest skip list (#23633)
* chore: manually backport 785a465e9a
This removes the reference to "flux.Spec".
* build(flux): update flux to v0.181.0 (#23682)
* build(flux): update flux to v0.184.2
* chore: skip more Flux acceptance tests
There are issues for each skip detailed in test-flux.sh.
* feat: upgrade flux to v0.185.0
This adds "FluxTesting" to the "HTTPD" configuration. This option is
hidden and disabled by default. When "FluxTesting" is set, it
enables the default testing flags for "Flux".
These flags allow the "vectorized float tests" and tests requiring
the "removeRedundantSortNodes" and "labelPolymorphism" flag
enabled to work. These changes are based off of d8553c002e.
flux@3d6f47ded is included within this version of Flux. Therefore
we can now include the "group_*" tests.
* feat: upgrade flux to 0.186.0
* feat: upgrade flux to 0.187.0
* feat: upgrade flux to 0.188.0
* fix: re-run ./generate.sh with updated protoc
* fix: restrict cores to match CircleCI documentation
Co-authored-by: davidby-influx <dbyrne@influxdata.com>
Co-authored-by: Markus Westerlind <marwes91@gmail.com>
Co-authored-by: Sean Brickley <sean@wabr.io>
Co-authored-by: Jonathan A. Sternberg <jonathan@influxdata.com>
Co-authored-by: Christopher M. Wolff <chris.wolff@influxdata.com>
This switches so that the message
skipped missing file: /path/to/tsm.tsm
is written to stdErr instead of stdout (or the output file if `-out` has been provided)
(cherry picked from commit a9bf1d54c1)
closes https://github.com/influxdata/influxdb/issues/23866
Co-authored-by: Ben Tasker <88340935+btasker@users.noreply.github.com>
New argument validation code for _fieldKeys system iterator
broke Enterprise tests because it is misused all over the
place. Back out the safety check.
When a file rename fails with EXDEV
(cross device or volume error), copy the
file and delete the original instead
Differs from master branch by overwriting
existing files instead of erring.
closes https://github.com/influxdata/influxdb/issues/22997
Instead of writing out the complete fields.idx
file when it changes, write out incremental
changes that will be applied to the file on
close and startup.
closes https://github.com/influxdata/influxdb/issues/23653
Brandon Pfeifer
Jack
alespour
davidby-influx
Geoffrey Wossum
Jamie Strandboge
Jeffrey Smith II
Sam Arnold