ARCH_MAX board uses 0x01 as PHY address, different from other NUCLEO STM32 boards. To faciliate change of PHY address of customized boards, a configuration entry eth-phyaddr was added and can be overriden as needed in mbed_app.json by adding "stm32-emac.eth-phyaddr": X. Macro ETH_ARCH_PHY_ADDRESS was also renamed to ETH_PHY_ADDRESS, because it is not only used by ARCH_MAX board but also other boards.
Incorrect addresses only cause error return values instead of assertion.
ExhaustibleBlockDevice has working get/set_erase_cycle functions and an
array preventing programming without erase.
Fixed MBRBlockDevice partitioning function.
1.Testing with Verizon and AT&T SIMs, PDP type is automatically set to IPV4V6.
2. Testing with AT&T IoT SIM, PDP type automatically sets to IP. It will connect
but not communicate. Setting a subsequent APN to IPV4V6 with the same APN communicates.
-Improve help texts of Wi-SUN configuration values
-Add min/max value checks to Wi-SUN configuration values
-Define default values for some parameters, instead of referring to
Nanostack internal default values.
Issue: udp_sendto() Fails for multicast IPV6 packet when interface is switched from SoftAP to STA mode.
When SoftAP start is called, add_ethernet_interface() will be called internally to add interface details into netif_list.
When switching from SoftAP to STA mode, add_ethernet_interface() will be called again to append the interace details into netif_list.
When udp_sendto() is called, ip6_route() will return interface as NULL since it consider device as single interface.
Fix: SoftAP mode Stop, call remove_ethernet_interface() to remove the interface from the netif_list.
ARM microlib is not supported below features
- fflush(NULL) return `-1` instead `0`
- fread with size parameter "Zero".
- if file opened in append mode, file postion starts from the beginning.
Major changes:
- Dependency to FileHandle removed from base classes
- AT_CellularDevice owns the default FileHandle and shares it with AT -classes
- Hang-up -detection moved as CellularContext::configure_hup(). Cannot be configured via CellularDevice any more.
Result on NRF52840_DK + BG96:
GCC:
Total Static RAM memory (data + bss): 29360(+296) bytes
Total Flash memory (text + data): 130660(-832) bytes
ARM:
Total Static RAM memory (data + bss): 261554(+8) bytes
Total Flash memory (text + data): 127573(-1193) bytes
IAR:
Total Static RAM memory (data + bss): 25479(+296) bytes
Total Flash memory (text + data): 102418(-527) bytes
RAM increase is because now ATHandler is no longer created with new -operator but is now member of AT_CellularDevice,
so image tool is able to count it. Actually total RAM consumption has decreased due to removed variables.
Adding a new target of HW development kit using [Samsung Exynos i S111](https://www.samsung.com/semiconductor/minisite/exynos/products/iot/exynos-i-s111/) module to Mbed-OS.
This will widen the HW choices of Mbed-OS enabled NB-IoT, GNSS and Security (eFuse, AES, SHA-2, PKA, Secure Storage, Security Sub-System, [PUF](https://en.wikipedia.org/wiki/Physical_unclonable_function)) modules.
Target Name: S5JS100
Co-authored-by: Ivan Galkin <ivan.galkin@samsung.com>
Co-authored-by: Seokwon Lee <swon.lee@samsung.com>
Co-authored-by: Zhizhe Zhu <zhizhe.zhu@samsung.com>
Co-authored-by: Xinyi Zhao <xinyi.zhao@samsung.com>
In kvstore_init, prior to initializing the kvstore, erase the
underlying block storage device. This ensures that each test run
starts from a consistent state and avoids failures that can result
if a previous test run left the storage in an inconsistent state.
Earlier we called AT+QICSGP only if the username and password was set.
It seems that we must call it also to set up APN while in AT mode.
This commit fixes the issue + updated IPv4/v6 handling to be correct in the same call
string_to_pdp_type is only used in CellularContext classes and by having
the conversion method in CellularContext it can be used to check also
the non-standard Non-IP PDP type string.
ATHandler is part of our API so header file was moved under API folder and .cpp file was moved under device/ folder
ATHandler is used in both AT and PPP mode so it has been in slightly wrong place at the beginning.
Some parts of PPP debug traces were enabled also on non-debug builds.
Now they are correctly disabled. Corrected also compiler warnings
that became visible when trace macros were flagged (if clauses without
brackets).
Add a missing license header.
Remove semaphores and add +CRTDCP to support async operation.
Fix delete context and disconnect to execute just once.
Add support for NONIP PPD type.
Change CellularNetwork::clear() to virtual so it can be overridden.
Add missing license headers.
Remove semaphores to allow async operation.
Change hex format to allow binary payload.
Limit payload size to 100 bytes.
Fix missing plus char at +QCFGEXT.
Earlier CellularDevice has owned event queue used by cellular (state machine and ATHandler for example),
but the thread used to dispatch the queue has been owned by state machine.
This commit moves the event queue thread to CellularDevice so now the ownership of cellular event queue
is in one place.
SPIFReducedBlockDevice parameters come from mbed_lib.json if not provided
explicitly.
Introduced an app config file for running filesystem tests with RSPIF
block device
SPIFBlockDevice parameters come from mbed_lib.json if not provided
explicitly.
Introduced an app config file for running filesystem tests with SPIF
modules
QSPIFBlockDevice parameters come from mbed_lib.json if not provided
explicitly.
Introduced an app config file for running filesystem tests with QSPIF
modules
- Earlier some variables were public even though used only internally
- Also refactored variables to the end of class definitions
- Removed duplicate _property_array from CellularDevice
- Changed _impl methods as protected
Mbed OS was carrying this directory for a long time. The main reason was
to enable users to benefit from some form of USB stack. Now when there
is proper implementation of USB stack in Mbed I think it's time for
unsupported directory to go. If any other functionality present in this
directory will be needed it'll need to be introduced in Mbed OS
properly.
All targets must implement soft_- and hard_power_on/off() functions which are practically same what onboard_modem_api offered.
These were seen as a duplicate features and therefore we removed this.
All targets involved have been updated to reflect the changes
Replaced a hardcoded timeout in CyH4TransportDriver.cpp with a cypress
hal function. The cypress PUTC hal API only blocks until data has been
send into the HW buffer, not until all data has been out of the HW
buffer. Modified an API to block untill all tx transmit is complete.
This allows the removal of a hardcoded timeout in
CyH4TransportDriver.cpp that waits for data int the HW buffer to be
sent.
When AT traces are enabled and very long AT commands are traced,
system can easily go to unwanted state. Therefore the length of the AT
traces is limited to DEBUG_MAXLEN (currently 60 characters).
This commit fixes read_hex_string, read_bytes and write to use this
limitter.
Zhiyonh Li
Hugues Kamba
Martin Kojtal
Kimmo Vaisanen
Michal Paszta
Leon Lindenfelser
midd
jeromecoutant
Arto Kinnunen
Pawel Zarembski
Kevin Bracey
Veijo Pesonen
Ari Parkkila
Vincent Coubard
Arun S
Rajkumar Kanagaraj
Anna Bridge
PARKJIHOON
Andrew Chong
Mirela Chirica
Caleb Szalacinski
Kyle Kearney
Bram de Boer
George Beckstein
Evelyne Donnaes
Antti Kauppila
mudassar-ublox
Mika Leppänen
ccli8
Dustin Crossman
Juha Heiskanen
paul-szczepanek-arm
Risto Huhtala
Bartek Szatkowski
Shuopeng Deng
Jaeden Amero
Lin Gao