Including mbedtls/config.h should not be done explicitely. This prevents using MBEDTLS_CONFIG_FILE macro.
Correct config file is automatically included by other mbedtls header files.
Previous change that removed string-based APIs missed
`LWIP::get_ip_address`. Remove string-based method (which is not
overriding anything in `NetworkInterface`) and add missing binary form
to implement `NetworkInterface::get_ip_address`.
Musca-B1 is a Cortex-M33 based target with security extension enabled.
- ARM_MUSCA_B1 is the non-secure target running mbed-os.
- ARM_MUSCA_B1_S is the secure target running TF-M.
- TF-M sources were imported and patched in previous commits.
- TF-M secure bootloader (McuBoot) for MUSCA_B1 is submitted by a
pre-built binary.
- A post-build hook concatenates The secure and non-secure binaries,
signs it and then concatenates the bootloader with the signed binary.
Change-Id: I4b36290941b5f0bb7aa7c12dda2f38b5c1e39ae2
Signed-off-by: Tamas Kaman <tamas.kaman@arm.com>
Signed-off-by: Gabor Abonyi <gabor.abonyi@arm.com>
Use `override` and `final` where appropriate, and eliminate unnecessary
`virtual`.
Some other C++11 simplifications.
Eliminate two unused header files (with no corresponding source files).
Reduces code size.
The rather fiddly `nsapi_create_stack` template + overloads used during
socket formation don't inline their core, which is the identity operation
for `NetworkStack *` itself. Make code generation easier by having that
core be inline.
DISCO_F769NI EMAC driver may return ethernet packet with illegal
length when driver is under heavy load. In one case, the received
bytes indicate frame length of 53 bytes but advertised data length
was 65518 bytes. In another case EMAC driver variable
`EthHandle.RxFrameInfos.length` contained value 0xFFFF FFFC.
As a work-around accept only 1-1500 bytes long ethernet packets.
ARCH_MAX board uses 0x01 as PHY address, different from other NUCLEO STM32 boards. To faciliate change of PHY address of customized boards, a configuration entry eth-phyaddr was added and can be overriden as needed in mbed_app.json by adding "stm32-emac.eth-phyaddr": X. Macro ETH_ARCH_PHY_ADDRESS was also renamed to ETH_PHY_ADDRESS, because it is not only used by ARCH_MAX board but also other boards.
Incorrect addresses only cause error return values instead of assertion.
ExhaustibleBlockDevice has working get/set_erase_cycle functions and an
array preventing programming without erase.
Fixed MBRBlockDevice partitioning function.
1.Testing with Verizon and AT&T SIMs, PDP type is automatically set to IPV4V6.
2. Testing with AT&T IoT SIM, PDP type automatically sets to IP. It will connect
but not communicate. Setting a subsequent APN to IPV4V6 with the same APN communicates.
-Improve help texts of Wi-SUN configuration values
-Add min/max value checks to Wi-SUN configuration values
-Define default values for some parameters, instead of referring to
Nanostack internal default values.
Issue: udp_sendto() Fails for multicast IPV6 packet when interface is switched from SoftAP to STA mode.
When SoftAP start is called, add_ethernet_interface() will be called internally to add interface details into netif_list.
When switching from SoftAP to STA mode, add_ethernet_interface() will be called again to append the interace details into netif_list.
When udp_sendto() is called, ip6_route() will return interface as NULL since it consider device as single interface.
Fix: SoftAP mode Stop, call remove_ethernet_interface() to remove the interface from the netif_list.
ARM microlib is not supported below features
- fflush(NULL) return `-1` instead `0`
- fread with size parameter "Zero".
- if file opened in append mode, file postion starts from the beginning.
Major changes:
- Dependency to FileHandle removed from base classes
- AT_CellularDevice owns the default FileHandle and shares it with AT -classes
- Hang-up -detection moved as CellularContext::configure_hup(). Cannot be configured via CellularDevice any more.
Result on NRF52840_DK + BG96:
GCC:
Total Static RAM memory (data + bss): 29360(+296) bytes
Total Flash memory (text + data): 130660(-832) bytes
ARM:
Total Static RAM memory (data + bss): 261554(+8) bytes
Total Flash memory (text + data): 127573(-1193) bytes
IAR:
Total Static RAM memory (data + bss): 25479(+296) bytes
Total Flash memory (text + data): 102418(-527) bytes
RAM increase is because now ATHandler is no longer created with new -operator but is now member of AT_CellularDevice,
so image tool is able to count it. Actually total RAM consumption has decreased due to removed variables.
Adding a new target of HW development kit using [Samsung Exynos i S111](https://www.samsung.com/semiconductor/minisite/exynos/products/iot/exynos-i-s111/) module to Mbed-OS.
This will widen the HW choices of Mbed-OS enabled NB-IoT, GNSS and Security (eFuse, AES, SHA-2, PKA, Secure Storage, Security Sub-System, [PUF](https://en.wikipedia.org/wiki/Physical_unclonable_function)) modules.
Target Name: S5JS100
Co-authored-by: Ivan Galkin <ivan.galkin@samsung.com>
Co-authored-by: Seokwon Lee <swon.lee@samsung.com>
Co-authored-by: Zhizhe Zhu <zhizhe.zhu@samsung.com>
Co-authored-by: Xinyi Zhao <xinyi.zhao@samsung.com>
Martin Kojtal
Rajkumar Kanagaraj
Kimmo Vaisanen
mudassar-ublox
Kevin Bracey
Veijo Pesonen
David Lin
Tamas Kaman
Marcin Tomczyk
Arto Kinnunen
Seppo Takalo
jeromecoutant
Tymoteusz Bloch
Michal Paszta
Zhiyonh Li
Hugues Kamba
Leon Lindenfelser
midd
Pawel Zarembski
Ari Parkkila
Vincent Coubard
Arun S
Anna Bridge
PARKJIHOON
Andrew Chong
Mirela Chirica