Martin Kojtal
d4e23e1048
Merge pull request #3291 from mazgch/patch-1
...
Adding mbed enabled Maker board with NINA-B1 and EVA-M8Q
2016-11-29 18:19:41 +01:00
Martin Kojtal
f89bf84beb
Merge pull request #3289 from TomoYamanaka/master
...
Bug fix of initial value of interrupt edge in "gpio_irq_init" function.
2016-11-29 18:18:17 +01:00
Martin Kojtal
a8ebfaa058
Merge pull request #3288 from LMESTM/dev_spi_asynch_l0l1
...
Dev spi asynch l0l1
2016-11-29 18:17:06 +01:00
Martin Kojtal
257d6357ca
Merge pull request #3283 from bridadan/remove-curl-references
...
Removing remaining references to Curl from ARM pack manager
2016-11-29 18:15:57 +01:00
Martin Kojtal
e261e30d05
Merge pull request #3193 from mikaleppanen/lwip_ipv6_eth_down_supp
...
Added clearing of ipv6 addresses to lwip bringdown function
2016-11-29 18:13:35 +01:00
Martin Kojtal
b36025f988
Merge pull request #3274 from bridadan/fix-path-detection-test-building
...
Passing toolchain path info to subprocesses
2016-11-29 18:13:00 +01:00
Martin Kojtal
42f4843b97
Merge pull request #3241 from NXPmicro/Add_KW41_Support
...
Add support for FRDM-KW41
2016-11-29 18:11:59 +01:00
Martin Kojtal
bb2d03f34b
Merge pull request #3213 from bcostm/factorize_ticker
...
STM32: Refactor us_ticker.c + hal_tick.c files
2016-11-29 18:10:45 +01:00
Martin Kojtal
c7d5ef09d0
Merge pull request #3341 from ARMmbed/ns_timeout-rename
...
Rename timeout.c to not collide with Timeout.cpp
2016-11-29 18:09:35 +01:00
Martin Kojtal
9da1ff5290
Merge pull request #3114 from sarahmarshy/uvision-filetype-fix
...
Fix issue with unrecognized uvision file types
2016-11-29 18:09:09 +01:00
Martin Kojtal
93c08f340a
Merge pull request #3062 from jamike/TARGET_STM_USBDEVICE_FS
...
TARGET_STM :USB device FS
2016-11-29 18:07:11 +01:00
Seppo Takalo
119c118e22
Rename timeout.c to not collide with Timeout.cpp
...
IAR builds put all object files in same directory, so same
prefix is not allowed.
2016-11-29 17:32:28 +02:00
Russ Butler
754bd24301
Merge pull request #3329 from simonqhughes/master
...
CFSTORE issue 3327: fix to build CFSTORE SRAM mode (disabling flash s…
2016-11-29 10:22:13 -05:00
Simon Hughes
46411f7f73
CFSTORE issue 3327: fix to build CFSTORE SRAM mode (disabling flash storage).
2016-11-28 16:09:00 +00:00
Anna Bridge
fc1f439161
Merge pull request #3323 from andreaslarssonublox/ublox_odin_w2_drivers_update
...
u-blox ODIN-W2 drivers update
2016-11-25 13:27:26 +00:00
Martin Kojtal
464f04c6ba
Merge pull request #3147 from bulislaw/wifi_test
...
Add new WiFi tests
2016-11-24 17:45:37 +00:00
Anna Bridge
fd7d5eca14
Merge pull request #3270 from AlessandroA/update_uvisor
...
uVisor: Update to v0.26.1
2016-11-24 13:22:14 +00:00
Martin Kojtal
082159ff18
Merge pull request #3300 from geky/events-fix-unchain
...
events - Fix unchaining of event queues
2016-11-23 18:20:28 +00:00
andreas.larsson
9abb7c3777
Updated ARM binary
2016-11-23 17:39:28 +01:00
andreas.larsson
4648ec606b
Added updated drivers for GCC, IAR
2016-11-23 15:18:17 +01:00
andreas.larsson
c2d09bd6a2
Fixed wrong start params to cbMAIN_startWlan
2016-11-23 11:38:35 +01:00
Martin Kojtal
d60f424a7e
Merge pull request #3256 from NXPmicro/Include_stddef
...
Kinetis SDK: Include stddef.h to fix build errors seen when including…
2016-11-22 22:20:29 +00:00
Martin Kojtal
905a173a7a
Merge pull request #3268 from NXPmicro/Coding_Convention_Changes
...
Coding convention changes
2016-11-22 22:18:41 +00:00
Martin Kojtal
9fdf7f775f
Merge pull request #3295 from geky/gcc-g3
...
Add '-g3' flag to gcc debug flags
2016-11-22 22:14:20 +00:00
Martin Kojtal
d215e4fa63
Merge pull request #3307 from theotherjimmy/import-sys-in-config
...
Add sys import to config
2016-11-22 22:13:43 +00:00
Russ Butler
f843d49247
Merge pull request #3267 from SeppoTakalo/mesh_refactor
...
ONME-2857: Ethernet interface for Nanostack
2016-11-22 12:59:50 -05:00
Alessandro Angelino
1321e12eca
uVisor: Update to v0.26.1
2016-11-22 17:24:05 +00:00
Michel Jaouen
a34e0937fb
build_travis.py : update for STM support
2016-11-22 10:52:15 +01:00
Michel Jaouen
bc17759226
USBHAL.h : fix indentation
2016-11-22 10:52:10 +01:00
Michel Jaouen
ad09abb71f
USBAudio , USBSerial :fix call back
2016-11-22 10:52:03 +01:00
Martin Kojtal
f4007e296d
Merge pull request #3284 from geky/move-emac-api
...
Move emac_api.h to the appropriate folder
2016-11-21 23:24:08 +00:00
Martin Kojtal
7f44dee6d1
Merge pull request #3278 from bcostm/nucleo-f103rb_ctsrts_pins
...
NUCLEO_F103RB - Add RTS/CTS pins for Serial Flow Control
2016-11-21 23:22:41 +00:00
Martin Kojtal
f7068eb57a
Merge pull request #3279 from yanesca/mbedtls-hardware-acceleration-configuration
...
Move crypto hardware acceleration configuration.
2016-11-21 23:22:16 +00:00
Martin Kojtal
f6022e7b8f
Merge pull request #3282 from c1728p9/fix_nvic
...
Ensure isr cannot occur after NVIC_DisableIRQ
2016-11-21 23:21:06 +00:00
Martin Kojtal
e07fcda4d0
Merge pull request #3287 from sg-/make-build
...
Unify output directory for mbed-cli and exporters
2016-11-21 23:19:42 +00:00
Martin Kojtal
a987cc0bee
Merge pull request #3271 from ARMmbed/odin_wifi_default_on
...
WiFi: Make WiFi default networking interface on Odin board
2016-11-21 23:19:02 +00:00
Martin Kojtal
4638cea1b2
Merge pull request #3297 from Mizuho32/master-greentea_client-mutex
...
added static specifer in green_metrics.cpp
2016-11-21 23:17:47 +00:00
Christopher Haster
87a1cfee42
Added equeue tests to travis CI
2016-11-21 12:48:16 -06:00
Christopher Haster
d513587806
events - Fixed unchaining of event queues
...
The equeue_chain function is supposed to unchain the event queue
from whatever queue it is chained to when passed a null target.
Internally, this is accomplished by just calling equeue_background
with null and letting the previously registered update function
clean up the chaining.
However, equeue_chain did not appropriately check for null, causing
it to unnecessarily allocate memory and leaving the update function
in a bad state. Fixed with a simple null check.
2016-11-21 12:25:48 -06:00
Jimmy Brisson
27f7aeef47
Add sys import to config
2016-11-21 11:26:21 -06:00
Michael Ammann
76cfccb716
Update PinNames.h
2016-11-21 08:07:58 +01:00
Mizuho
56d71a429e
added static specifer in green_metrics.cpp
2016-11-19 08:17:05 +09:00
Christopher Haster
83e5f272f6
Added '-g3' flag to gcc debug flags
...
Includes extra information, such as all the macro definitions present
in the program
2016-11-18 14:45:59 -06:00
Michael Ammann
5cf34fac8e
Add files via upload
2016-11-18 17:17:28 +01:00
Michael Ammann
83379979a2
Create device.h
2016-11-18 17:17:15 +01:00
Michael Ammann
1b59ec0376
Update targets.json
2016-11-18 17:15:08 +01:00
Janos Follath
e9144ad771
Apply new naming convention to mbed TLS macros
2016-11-18 15:01:01 +00:00
tomoyuki yamanaka
b7c901c8e7
Bug fix of initial value of interrupt edge in "gpio_irq_init" function.
...
Renesas modified the initial value of interrupt edge in "gpio_irq_init" function.
The value was "both egde(rise and fall)".So we modified it to "low revel".
2016-11-18 21:03:00 +09:00
Janos Follath
9137574e4d
Move mbed TLS configuration symbol to macro section
...
The configuration option for the mbed TLS specific hardware acceleration
has to be in the macro section and not in the device capabilities
section in targets.json.
The option has also been renamed to better reflect its function.
2016-11-18 09:55:16 +00:00
Laurent MEUNIER
40b0402484
[stm32] Enable SPI_ASYNCH for L0 and L1 families
2016-11-18 09:59:53 +01:00