347b41de66
Merge pull request #502 from Sissors/ksdk
...
[HAL] Freescale KSDK - Use PIT timer for ticker/timeout
2014-09-23 08:23:15 +01:00
cb3999ca5e
Merge pull request #504 from 0xc0170/fix_enet_k64f_ksdk
...
[NET, HAL] K64F - update files to use address of enet peripheral (not instance as required by KSDK v1.0)
2014-09-22 17:15:30 +01:00
c4a60632a8
[NET, HAL] K64F - enet edit for new header files (address used instead of instance)
...
- hal enet - asserts commented out as they are not valid for new MCU headers (address, no instance)
- net - corrections for new ksdk API
2014-09-22 13:49:12 +01:00
362f0ce335
Merge branch 'master' of https://github.com/mbedmicro/mbed
2014-09-22 10:41:28 +02:00
2e5c761dc8
Merge pull request #495 from ohagendorf/develop
...
[NUCLEO_F4x1RE] test MBED_A7 InterruptIn - new test case - both interrupts disabled
2014-09-22 09:26:12 +01:00
fd5b02f014
[NUCLEO_F302R8] Fix issue with MBED_A7 test
...
Add new STM_MODE_IT_EVT_RESET GPIO mode.
2014-09-22 10:03:50 +02:00
d4263bfed6
[HAL][KSDK] Use PIT timer for ticker/timeout
...
Previously in the KLXX devices the LPTMR was used for ticker/timeout,
since they only have 2 PIT channels which are required for regular
timer. The KSDK targets have 4 PIT channels, which allows for two 32-bit
timers running at 1 MHz.
Since PIT timers are 32-bit, and LPTMR 16-bit, this both simplifies it
and makes it more efficient. It does cost the remaining 2 PIT channels,
but on the other hand leaves the LPTMR free.
2014-09-20 21:36:29 +02:00
c4c90fe780
[mbed][exporters][k22f][gcc] Added exporters for uvision, gcc_arm, kds. Known issues are: uvision5 as K22F doesnt seem to be supported with uvision4. gcc_arm and kds - build but blinky led color doesnt behave correctly. Haven't debugged much. python project.py -m K22F -p 25 -i kds [uvision] [gcc_arm] to pick back up.
2014-09-19 18:46:22 -05:00
4df4b2ffc5
[mbed][KPSDK][K22F][K64F] sw_timer.c seems to be left over from the last version of KSDKand isn't part of the v1.0.0 release. fsl_interrupt_manager.c relies on using KSDK specific startup code and linker scripts which we dont use.
2014-09-19 15:51:45 -05:00
0111694e1e
Merge branch 'master' of https://github.com/mbedmicro/mbed
2014-09-19 14:33:30 +02:00
01f28ff20d
Merge pull request #491 from sg-/master
...
[ENET] K64F - Remove storage-class specifier "extern" from C++ guard at closing squiggle
2014-09-19 08:25:22 +01:00
9266e3a74e
[NUCLEO_F302R8] Fix bug with MBED_A7 test (irq edges disabled)
2014-09-19 09:03:08 +02:00
47b4e3cdb0
[NUCLEO_F302R8] Remove stdlib folders
...
Not used, was there as backup.
2014-09-19 09:00:50 +02:00
45019cf62b
[DISCO_F407VG] test MBED_A7 InterruptIn failed
...
- solution similar to [NUCLEO_F4x1RE]
- digital_loop tests "DigitalIn DigitalOut", "DigitalInOut" and
"InterruptIn" are OK
2014-09-18 21:49:26 +02:00
e19acbbb98
[NUCLEO_F302R8] Migration to STM32Cube driver.
...
Actual code is based on the Standard Peripherals Library.
2014-09-18 15:08:35 +02:00
c59657a6d9
[NUCLEO_F4x1RE] test MBED_A7 InterruptIn failed
...
The test failed because it was not possible to switch off an already
active edge detection.
The reason was the GPIO HAL module driver function HAL_GPIO_Init. The
function changes only interrupt or event flags when the EXTI_MODE flag
in GPIO_Init->Mode is set. gpio_irq_set changed the event mode to
EDGE_NONE in gpio_irq_t structure but that doesn't changed the interrupt
and event flags in the CMSIS function because of the missing EXTI_MODE.
Now gpio_irq_set is able to switch off a specific or both edge
detections.
The MBED_A7 test was extended by another test to check if switch off
edge detection is OK.
2014-09-18 14:27:55 +02:00
b051dbd717
[HAL] Freescale KSDK - MBED_NO_ENET guard for enet drivers
2014-09-17 08:53:36 +01:00
0390a92d71
[HAL] MCU_K64F - files in MCU_K64F folder, as it is in the latest mbed master
2014-09-16 15:54:14 +01:00
cfd2a98b57
[KPSDK] Revert Enet driver to older version - compatible with lwip port
...
- this will be reverted back along with an updated lwip K64F implementation
2014-09-16 15:15:32 +01:00
a83f8e809d
[HAL] K64F - timestamp_t change in usticker
2014-09-16 14:22:47 +01:00
385d2fe792
MCU K64F files in K64F target folder
2014-09-16 13:45:02 +01:00
c8eab47e81
Merge branch 'master' of github.com:Sissors/mbed into Sissors-master
...
Conflicts:
libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/PeripheralPins.h
libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/PortNames.h
libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/fsl_bitaccess.h
libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K64F/PeripheralPins.h
libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K64F/PortNames.h
libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K64F/analogin_api.c
libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K64F/analogout_api.c
libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K64F/device/MK64F12/regs.h
libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K64F/gpio_api.c
libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K64F/gpio_irq_api.c
libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K64F/gpio_object.h
libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K64F/i2c_api.c
libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K64F/objects.h
libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K64F/pinmap.c
libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K64F/port_api.c
libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K64F/pwmout_api.c
libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K64F/rtc_api.c
libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K64F/serial_api.c
libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K64F/sleep.c
libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K64F/spi_api.c
libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K64F/us_ticker.c
libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_MCU_K64F/PeripheralPins.h
libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_MCU_K64F/PortNames.h
libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_MCU_K64F/analogin_api.c
libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_MCU_K64F/analogout_api.c
libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_MCU_K64F/device/MK64F12/regs.h
libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_MCU_K64F/device/MK64F12/system_MK64F12.h
libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_MCU_K64F/gpio_api.c
libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_MCU_K64F/gpio_irq_api.c
libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_MCU_K64F/gpio_object.h
libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_MCU_K64F/i2c_api.c
libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_MCU_K64F/objects.h
libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_MCU_K64F/pinmap.c
libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_MCU_K64F/port_api.c
libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_MCU_K64F/pwmout_api.c
libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_MCU_K64F/rtc_api.c
libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_MCU_K64F/serial_api.c
libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_MCU_K64F/sleep.c
libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_MCU_K64F/spi_api.c
libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_MCU_K64F/us_ticker.c
libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/analogin_api.c
libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/analogout_api.c
libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/gpio_api.c
libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/gpio_irq_api.c
libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/gpio_object.h
libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/i2c_api.c
libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/objects.h
libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/pinmap.c
libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/port_api.c
libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/pwmout_api.c
libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/rtc_api.c
libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/serial_api.c
libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/sleep.c
libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/spi_api.c
libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/us_ticker.c
libraries/net/eth/lwip-eth/arch/TARGET_Freescale/fsl_enet_driver.c
workspace_tools/tests.py
2014-09-16 13:43:02 +01:00
01b323b46b
[mbed][k64f][enet] Remove extern from c++ guard at closing squiggle
2014-09-12 19:25:25 -05:00
dd418c9507
Merge remote-tracking branch 'upstream/master'
2014-09-12 13:15:18 -05:00
05aeadd8a9
Bumped revision number
2014-09-12 16:14:56 +01:00
5eb0d384fb
Merge branch 'master' of github.com:mbedmicro/mbed
2014-09-12 10:52:44 +01:00
a2853d2aa4
Revert "Fixed crash issue in RawSerial::printf for uARM"
...
This reverts commit d05b7f51d8
2014-09-12 10:47:34 +01:00
c372035d60
Merge pull request #477 from sg-/master
...
Add derivative support to K64F and updates for MTS_GAMBIT
2014-09-11 16:47:48 +01:00
81ab34fd83
Merge pull request #475 from giulianodianda/master
...
STMs: Microlib heap fix for new, malloc and friends
2014-09-11 16:35:53 +01:00
5f6da82f2f
Merge remote-tracking branch 'upstream/master'
2014-09-11 11:07:25 -04:00
c281ede3db
Merge pull request #483 from Experiment-626/master
...
Changed the #define DEVICE_SEMIHOST to 0 to allow for wakeup of deepslee...
2014-09-11 16:00:48 +01:00
1393115460
Merge pull request #484 from ohagendorf/master
...
[Nucleo_F4x1]: 2 extensions for a) toolchain ARM_GCC and b) test DigitalIn DigitalOut
2014-09-11 15:17:12 +01:00
8a63c226dd
Merge pull request #485 from Accutechs/master
...
[LPC4337] add support
2014-09-11 14:00:04 +01:00
31f43a3305
Merge pull request #487 from xiongyihui/nrf51822
...
[nrf51822] avoid using a global variable and fix I2C read sequence
2014-09-11 13:02:23 +01:00
48bd3819f5
Merge pull request #481 from arebert/lpc4088
...
[LPC4088] Corrected calculation of CAN clock and making it possible to put code in QSPI flash
2014-09-11 12:59:45 +01:00
592d6244d4
[nrf51822] properly generate stop condition of I2C read sequence
2014-09-11 18:05:40 +08:00
274a34f472
avoid using a global variable
2014-09-11 15:17:33 +08:00
0de8335c20
[K22F] Sleep/deepsleep verified to work
...
Works properly with waking from interruptin, not from timeout from
regular sleep, but thats the nature of the current KSDK Ticker timer
used, can be changed later on :)
2014-09-11 08:33:44 +02:00
a1be82dc81
[KSDK][K22F] AnalogIn/Out added/verified
...
The original code switched ADC clock source depending on required
prescaler. Maybe thats possible on K64, but on K22 it just tried to set
clock to non-existing source. Not it gets a bit above MAX_ADC, but that
is set fairly conservative so is not an issue.
2014-09-11 08:08:39 +02:00
a9d60a2520
[LPC4337] support AnalogOut
2014-09-11 13:48:08 +09:00
da9b7d33a4
Toolchain GCC ARM for Nucleo_F411RE
...
- Linker script and startup for Nucleo_F411 - both are copies of
Nucleo_F401 with some changes (memory size, interrupt vector table)
- changes in target.py for the new toolchain
2014-09-10 23:48:06 +02:00
abcfdfb3bf
Changed the #define DEVICE_SEMIHOST to 0 to allow for wakeup of deepsleep and changed #define DEVICE_LOCALFILESYSTEM to 0 to fix errors relating to removing semihost in device.h;
2014-09-10 14:21:24 -04:00
9e74068fbd
Added pin names for SPI buses and SPI chip select lines as well as pin names for GPIO pins.
2014-09-10 13:14:47 -05:00
33434f3c4a
Revert "add minimal support files for a Nordic bootloader."
...
This reverts commit 99d14db8c1
2014-09-10 14:03:51 +01:00
9c1a43f13d
[LPC4088] Making it possible to put code in QSPI flash
2014-09-10 10:43:59 +02:00
4511b5bbc5
[LPC4088] Corrected calculation of CAN clock
2014-09-10 10:39:09 +02:00
85495dbc62
Merge remote-tracking branch 'upstream/master'
2014-09-09 17:48:44 -04:00
6c61dab521
GPIO-irq fixed + activated on K22F + Arduino pins
2014-09-09 23:21:33 +02:00
47988de521
RTC works correctly
...
Removes unnecesary code, and moved some things around, now it works
fine.
2014-09-09 22:52:51 +02:00
c9194f0f9e
RTC compiles and doesn't crash anymore, but also doesn't run
2014-09-09 20:51:13 +02:00
6585203559
Added SPI to K22F
...
Just copied from K64F the pinmap and removed SPI2, seems to be
identical. And apparantly had a typo in i2c which is fixed now.
2014-09-09 20:26:54 +02:00
89342dbe69
Merge remote-tracking branch 'upstream/master'
2014-09-10 03:20:05 +09:00
99d14db8c1
add minimal support files for a Nordic bootloader.
2014-09-09 11:14:31 +01:00
82ec8c2c4d
Added support for Nordic parts with 32K of RAM
2014-09-08 16:27:53 +01:00
555d43fab4
Added K22F I2C + fixed I2C
...
First part was pinouts. Second part is that the earlier done new I2C
commands were wrong. The macros for writing for example status register
expect the I2C base address, and were only getting the number of the i2c
peripheral. After figuring that one out technically the changes in
timeout_status_poll aren't necesary, but it won't hurt either.
2014-09-07 21:39:16 +02:00
978732550b
Green LED irritation fix
...
The green LED is by default on. It is part of the JTAG interface,
although then it should be high-Z. Whatever the exact reason, it bothers
me. This disables it at startup (by switching the pin to GPIO).
2014-09-07 15:03:29 +02:00
15bbd4143c
K22F PWM support
...
Pinouts added, and pwm names changed into something which are bit easier
to use when making that pinout.
2014-09-07 14:53:31 +02:00
b55e3b42b4
Merge remote-tracking branch 'upstream/master'
2014-09-07 19:59:40 +09:00
0abd9a2518
[LPC4337] support Rev.B board on PinNames.h
2014-09-07 19:58:13 +09:00
1aaaea5553
Set correct CPU for K22F
...
Apparantly the wrong CPU was set, fixed that to correct one
(MK22F51212). Won't hurt though if someone checks the .s and .sct file.
(It does compile and work fine now for blinky and helloworld)
2014-09-07 11:56:21 +02:00
d35e9bbe27
Added Serial support for K22F and fixed overal serial
...
First part is pretty obvious, added some pin defines, and some ifdefs in
serial_api.c to make it compile (they all use KSDK macros, so goes
automatically, and not that many ifdefs).
Second part is that in the new version of the hal files you apparantly
got to manually enable the uart transmitter/receiver. This wasn't in
there yet, so it did very little.
Now it works fine on a K22F (well minus the part where the first char in
a program isn't transmitted, but thats alot better than nothing being
transmitted)
2014-09-06 20:50:33 +02:00
50ce80b7d2
K22F support added
...
And that is a bit of an overstatement. But mbed blinky works :D. And
nothing else works atm. Still more than before today.
Every option in device.h is disabled (and won't work), but now they can
slowly be enabled (they will need pinouts and most some will need some
changes in the mbed api files).
One of the major issues was that the KSDK is intended to only compile
relevant peripherals, but the mbed build system does not support this.
So now for the affected peripherals (with the K22F and K64F) instead of
throwing an error when no valid CPU is found for them, it sets a define,
and the relevant .h and .c files have an #ifndef for that define. This
way it doesn't need to be manually set for each mbed target.
2014-09-06 16:32:37 +02:00
3a31537cfb
Merge pull request #478 from bcostm/master
...
[NUCLEO_L152RE] Enable HSI clock for ADC
2014-09-05 15:38:02 +01:00
bd60f75691
For HRM1017 (nRF51822), setup the internal RC clock instead of the low-frequency crystal.
...
Change request from Tsuboi San.
2014-09-05 15:21:57 +01:00
f9e7f69241
Merge branch 'master' of https://github.com/mbedmicro/mbed
2014-09-05 11:38:19 +02:00
449b984e4a
Merge pull request #468 from xiongyihui/dev
...
[nrf51822][gcc_arm]: fix makefile templates and nrf_svc.h's 'impossible constraint in asm' error
2014-09-05 10:15:54 +01:00
35660622d9
[NUCLEO_L152RE] Enable HSI clock for ADC
2014-09-05 11:03:56 +02:00
24f537ea60
[MTS_GAMBIT][K64F][exporters][net] Update directory names for K64F to allow derivative platforms. Change net/eth/lwip-eth/arch directory name to allow K64F derivative EthernetInterface support. Disable Ethernet in MTS_GAMBIT device.h - seems depreciated or just not implemented. Add MTS_GAMBIT exporters for uvision and gcc_arm
2014-09-04 17:26:54 -05:00
49e01fb232
Fix I2C0 pin init
2014-09-03 11:12:50 -04:00
7aedd02f25
mostly white space diffs to Nordic's system startup file
2014-09-03 13:18:02 +01:00
722cb53e96
STMs: Microlib heap fix for new, malloc and friends
...
heap can grow outside 0x400 default size and does not overlap stack
area.
2014-09-03 00:14:49 +02:00
ef0819c731
[LPC4337] move files from LPC43XX to LPC4330
2014-09-03 02:20:48 +09:00
1ee314c4a5
[LPC4337] first commit
...
just confirmed with >workspace_tools\make.py -m LPC4337_M4 -t ARM -p 25
2014-09-01 23:30:22 +09:00
f304c6ba83
Merge pull request #471 from dbestm/master
...
[NUCLEOs] enhance i2c api
2014-08-29 20:42:28 +01:00
958aa2488b
changes proposed from Martin's review
2014-08-29 17:02:40 +01:00
6daf3ac52a
add a destructor for Ticker.
2014-08-29 17:02:40 +01:00
fedb7f02c0
use timestamp_t for Ticker::_delay
2014-08-29 17:02:39 +01:00
ab17cc71dc
minor simplification of a reused expression
2014-08-29 17:02:39 +01:00
a5ac14aab0
use constants from projectconfig.h as arguments for APP_TIMER_INIT()
2014-08-29 17:02:39 +01:00
c8f896d708
update definitions for us_ticker_set_interrupt() across all platforms to use timestamp_t
2014-08-29 17:02:39 +01:00
01bc4de3ab
white space diffs.
2014-08-29 17:02:39 +01:00
c8fc050ce4
simplify the algorithm which keeps only one app_timer timer running.
2014-08-29 17:02:39 +01:00
dcdca19948
updated call to APP_TIMER_INIT() to use contants from projectconfig.h
2014-08-29 17:02:39 +01:00
675ddde2f4
introduce a timestamp_t to track timeouts for TimerEvents.
...
The previous type used for this purpose was unsigned int, which was both
un-portable and liable to wrap-around.
2014-08-29 17:02:39 +01:00
7555d7411c
add a cachedInterruptTimestamp to us_ticker_set_interrupt() to short-circuit duplicate calls.
2014-08-29 17:02:39 +01:00
88e2e4e369
add a minor comment to explain some complex branching in us_ticker_irq_handler()
2014-08-29 17:02:39 +01:00
9294fcbb59
reimplement the micro-second ticker on nRF51822 using the app_timer module (RTC)
2014-08-29 17:02:39 +01:00
ac11358455
add a missing call to us_ticker_disable_interrupt from us_ticker_remove_event.
2014-08-29 17:02:39 +01:00
2deb3706d2
Replace the 16mhz clock with a low-freqncy external crystal based clock source at statup.
...
This results in a big win in power consumption.
2014-08-29 17:02:39 +01:00
27be321fa6
add some more files related to app_common/ to the Nordic Lib
2014-08-29 14:47:30 +01:00
aee7023d7f
[NUCLEOs] enhance i2c api
2014-08-29 15:31:51 +02:00
04d0142bd6
add app_common header files for Nordic targets
2014-08-29 11:37:13 +01:00
bbe0203ccf
Renamed TARGET_GHI_MBUINO to TARGET_OC_MBUINO to fix an issue with the online compiler.
2014-08-28 15:22:12 -04:00
616ac8929a
add support for nRF51-DK
2014-08-28 16:36:16 +01:00
bda033dc8e
[nrf51822][gcc_arm][c++]: fix 'impossible constraint in asm' error, used by ble app
2014-08-28 16:54:27 +08:00
90467175c0
cleaning up code within Nordic's mbed HAL using astyle
2014-08-27 08:42:26 +01:00
d20ce63487
Merge pull request #463 from toyowata/master
...
[Common] Fixed crash issue in RawSerial::printf for uARM
2014-08-27 10:57:32 +08:00
74958e0f72
Merge pull request #465 from bcostm/master
...
[NUCLEOs] Fix bug (normalization to 16bit) in adc read_u16()
2014-08-27 10:40:19 +08:00
3fa2fcb906
Merge pull request #466 from AFritzMulti/master
...
[HAL][MTS_GAMBIT] Update the PeripheralPins.c mapping
2014-08-27 10:21:29 +08:00
0cafe361f3
Updated the PeripheralPins.c mapping
2014-08-26 15:46:43 -05:00
314f578539
[NUCLEOs] Fix bug with adc read_u16 function
...
Add data convertion from 12bit to 16bit.
2014-08-26 15:27:42 +02:00
fc5473216a
Move mbed api files one level up
...
These should hopefully be pretty much identical for all KSPDK targets.
If thats not the case individual files can be moved down again.
2014-08-25 20:36:37 +02:00
f3e48d0702
Updated CMSIS for K64F
2014-08-25 20:31:39 +02:00
43cf048130
Update HAL-KSPDK files to 1.0 part 3
...
Last ones, apparantly some new enet files, might need to be deleted
later on again
2014-08-25 20:24:42 +02:00
419839929a
Update HAL-KSPDK files to 1.0 part 2
...
Update of the hal folder
2014-08-25 20:18:56 +02:00
db0a9b1f06
Update HAL-KSPDK files to 1.0 part 1
...
Everything except drivers and hal folder
2014-08-25 20:10:54 +02:00
509a487cf6
Update HAL-K64 KSDK files to 1.0
...
only fsl_device_registers changed
2014-08-25 19:48:11 +02:00
d05b7f51d8
Fixed crash issue in RawSerial::printf for uARM
...
Fixed crash issue in RawSerial::printf() function for microlib platforms
since microlib doesn't fully support C99 functions such as vsnprintf().
2014-08-25 16:13:43 +09:00
8178db5d38
Fix SPI merge with new KSDK function names
2014-08-24 17:19:58 +02:00
8f90794eec
Include spi conflict fix
...
Which I missed in the initial merge
2014-08-24 17:13:56 +02:00
ae822b969a
Merge remote-tracking branch 'martins/dev_ksdk_update'
...
Conflicts:
libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K64F/analogin_api.c
libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K64F/spi_api.c
2014-08-24 17:12:27 +02:00
bbc120c478
Merge pull request #460 from xiongyihui/stm32f407
...
DISCO_F407VG - add USBDevice support and a variant - ARCH_MAX
2014-08-21 14:57:36 +01:00
fc1fa25ada
Merge pull request #461 from Cheong2K/master
...
[RBLAB_NRF51822] Fixed syntax error and analog pins.
2014-08-21 14:25:28 +01:00
0ca7a7096a
Fixed syntax error and analog pins.
2014-08-21 21:15:49 +08:00
5ba8d2a310
Merge pull request #450 from micromint/master
...
LPC4330_M4 port_api, us_ticker update
2014-08-21 10:54:39 +01:00
0f8a06d818
Merge pull request #459 from bcostm/master
...
[NUCLEOs] Improvement of Serial hal
2014-08-21 10:41:22 +01:00
cbe4a4b26e
add target ARCH_MAX, a variant of DISCO_F407VG
2014-08-21 16:48:40 +08:00
5655a56941
[NUCLEO_F334R8] Improvement of Serial hal
2014-08-21 09:58:05 +02:00
91ee61cc17
[NUCLEO_L053R8] Improvement of Serial hal
2014-08-21 09:54:11 +02:00
b507427292
[NUCLEO_F072RB] Improvement of Serial hal
2014-08-21 09:39:21 +02:00
300dbd6843
Fixed pins for RBL nRF51822 board.
2014-08-21 11:01:34 +08:00
9008380c67
Fixed pins for RBL nRF51822 board.
2014-08-21 10:38:02 +08:00
63cf897d5a
[NUCLEO_L053R8] Fix bug and improvement of AnalogIn
2014-08-20 16:42:40 +02:00
381fec2ba2
Change pins for RBL nRF51822 board.
2014-08-20 16:41:37 +08:00
c8b763e022
Merge pull request #449 from bcostm/master
...
[NUCLEOs] Set heap size to 0x400
2014-08-20 09:25:43 +01:00
39f82c99ec
LPC4330_M4 port_api, us_ticker update
2014-08-19 18:16:48 -04:00
0cb4ae69ce
Merge pull request #447 from webbbn/nrf51822_uart_any_pin
...
Adds standard DONT_CARE pin name for specifying that any pin will work
2014-08-19 14:38:19 +01:00
7d815919fd
[NUCLEOs] Set heap size to 0x400
2014-08-19 15:08:25 +02:00
4dbfe1ea08
Merge pull request #445 from Experiment-626/master
...
Renamed TARGET_GHI_MBUINO to TARGET_OC_MBUINO to match the new name of t...
2014-08-18 09:18:55 +01:00
0cd6ca6600
add missed port
2014-08-18 11:12:18 +08:00
611be2ae7c
Disables checking UART pins checking on nRF51822.
2014-08-17 09:55:34 -07:00
c3e6faaa76
Revert "Adds a standard DONT_CARE pin name that allows specifying that any pin will..."
...
This reverts commit c804dc8013
2014-08-17 09:43:32 -07:00
c804dc8013
Adds a standard DONT_CARE pin name that allows specifying that any pin will
...
work in a pin map. This is currently used in the NRF51822 serial API to allow
specifying any pins as a UART.
2014-08-16 08:06:54 -07:00
34465d06a7
Bumped SDK revision number
2014-08-15 16:19:19 +01:00
a681b14416
Change "error.h" to "mbed_error.h" to avoid conflicts with 3rd party code
2014-08-15 16:19:18 +01:00
bf254ca673
For this commit, renamed GHI_MBUINO to OC_MBUINO as required for the platform change as well as the TARGET_GHI_MBUINO to TARGET_OC_MBUINO directory.
2014-08-14 10:56:32 -04:00
cde156cadc
Added implementation for "rename" on FAT file system
2014-08-13 10:20:31 +01:00
c2327523bd
LP4330_M4 i2c/spi update
2014-08-12 19:25:25 -04:00
ec6f5454a8
Merge pull request #435 from janekm/master
...
fixes to NRF51822 GCC template
2014-08-12 10:22:59 +01:00
c266ac3596
Merge pull request #439 from xiongyihui/stm32f407
...
[Exporters] add DISCO_F407VG's uvision support
2014-08-12 07:38:54 +01:00
c8704284bd
add DISCO_F407VG's uvision support
2014-08-12 11:53:19 +08:00
15129aa459
Merge pull request #434 from chrta/add_lpc1549_gcc_arm
...
[LPC1549] Add support for GCC_ARM
2014-08-11 14:34:11 +01:00
ca36374e2e
Merge pull request #436 from xiongyihui/variant_bug
...
fixed L6235E link error for Xadow M0
2014-08-11 13:59:40 +01:00
74080c1efc
getting up to date with upstream
...
Merge remote-tracking branch 'upstream/master'
2014-08-11 12:45:49 +01:00
c5f07dc672
fix for NRF51822 linker script
2014-08-11 11:42:41 +01:00
9c4ba9aae2
Merge pull request #432 from Experiment-626/master
...
[GHI_MBUINO] Added the symbol PinMap_I2C_SDA[] and PinMap_I2C_SCL[] to the Peripheral...
2014-08-11 08:37:31 +01:00
0b7b75881a
fixed L6235E link error for Xadow M0
2014-08-11 12:37:06 +08:00
67e9feeab7
[LPC1549] Add support for GCC_ARM
2014-08-09 16:05:06 +02:00
441099212a
Added the symbol PinMap_I2C_SDA[] and PinMap_I2C_SCL[] to the PeripheralPins.c file. Compiled against uARM, ARM, and GCC_ARM.
2014-08-08 11:33:19 -04:00
6e585609af
Merge branch 'master' of github.com:mbedmicro/mbed
2014-08-08 14:15:22 +01:00
Martin Kojtal
bcostm
Sissors
sg-
ohagendorf
Andrew Fritz
Bogdan Marinescu
Bogdan Marinescu
jesusalvarez
Yihui Xiong
ytsuboi
Aron L. Phillips
Rohit Grover
Andreas Rebert
Giuliano Dianda
dbestm
Toyomasa Watarai
Cheong2K
Cheong
Brian Webb
Martin Kojtal
Alexander Valitov
Janek Mann
Christian Taedcke