This commit implements a SPI mode which will offer better performance
thanks to usage of Lower Layer API which use fewer registers access,
at the cost of lower robustness (no error management).
This patch updates CMSDK_CM3DS.h to remove the
DMA peripheral memory map and defines, as
that peripheral is not present in the system.
In addition, some define names where updated
concerning rtc. RTC_api was updated accordingly.
This patch also updates SMM_MPS2 to align defines and
comments.
Signed-off-by: Marc Moreno <marc.morenoberengue@arm.com>
This patch implements pin_function and gpio_set
with some fixes in the PinNames.
The patch also updates the serial and spi
drivers to use the pin_function.
Signed-off-by: Marc Moreno <marc.morenoberengue@arm.com>
cmsis 5 does not include it but as mbed 2 requires this, we will bring this file
back. This brings back few other dependencies, that we add only for cortex-a.
Once cortex-a gets cmsis5 and rtx2 support it will be updated.
At some point the "mount" parameter for "f_mount" was name "force". This
led to a bit of confusion that ended with the default mount function
never calling block device init.
This is fine, since the block device can be manually initialized, but
a better user experience is where the filesystem initializes the block
device for the user.
This is backwards compatible due to the repeatability of the block
device init functions.
Following
Merge pull request #4063 from LMESTM/17q2_L4_bootloader
the NUCLEO_L476RG binairies could not boot anymore.
The change done in #4063 was derived from work on NUCLEO_L429ZI target
which supports uvisor. The VECTORS defintiion is introduced as part of
uvisor support and requires further changes in ld file which were missing.
As uvisor is not considered yet, we remove VECTORS for now and will
introduce only when needed.
Remove HAL_Init and related code from SystemInit and move it to
mbed_sdk_init. The function SystemInit is called early in the boot
sequence before RAM is initialized or the VTOR is setup, so it should
not be used to perform the HAL initialization.
This fixes crashes due the vector table being used before it has been
relocated.
Fixes issue #4537. SerialBase and UARTSerial happened to have same names
for the mutex locking that confused the system of holding a mutex in interrupt context.
UARTSerial has to change so as to provide empty implementations for lock() and unlock()
becuase it uses SerialBase from interrupt context only or from its own critical section,
so no extra locks required.
Private locks for UARTSerial itself are renamed to api_lock() and api_unlock().
The function _eth_arch_low_level_input() is meant to pass data into
LWIP and to prepare the ethernet buffers to receive more data.
If the LWIP heap is empty and the call to pbuf_alloc() in
_eth_arch_low_level_input returns null, the ethernet receive buffers
are not updated to receive data. Because of this the ethernet RX
interrupt will not fire. Since the RX interrupt is the only thing that
triggers a call to _eth_arch_low_level_input(), the receive buffers
will never get cleared, and the device stops receiving data.
To prevent this from happening, this patch ensures that the function
_eth_arch_low_level_input() clears the receive buffers even if a new
pbuf for the data couldn't be allocated.
This issue can be reproduce by running the test
"features-feature_lwip-tests-mbedmicro-net-udp_echo_parallel"
and on the same machine running the below python script to flood the
device with UDP broadcast packets:
MY_IP = #ADD your local IP here
from socket import *
s = socket(AF_INET, SOCK_DGRAM)
s.bind((MY_IP, 1234))
s.setsockopt(SOL_SOCKET, SO_REUSEADDR, 1)
s.setsockopt(SOL_SOCKET, SO_BROADCAST, 1)
for _ in range(1000):
s.sendto("test data", ('255.255.255.255', 1234))
print("Message sent")
adustm
andreas.larsson
Laurent MEUNIER
Marc Moreno Berengue
Sam Grove
Anna Bridge
Rob Meades
Martin Kojtal
Russ Butler
Christopher Haster
Andreas Larsson
bcostm
Jimmy Brisson
Mahadevan Mahesh
jeromecoutant
Hasnain Virk
Yuguo Zou
Azim Khan