### Description
The Mbed 2 release was broken for FF_LPC546XX as it would include
the entire mbed 2 build of the LPC546XX. This PR seperates these 2
builds completely by:
* Removing non-shared extra labels from the MCU_LPC546XX target
* Moving the target implementation to a shared target directory
### Pull request type
[x] Fix
[ ] Refactor
[ ] Target update
[ ] Functionality change
[ ] Breaking change
--legacyalign, --no_legacyalign are deprecated from ARMC6 compiler, in order to
remove deprecated flags all linker files (GCC and IAR as well to have uniformity)
should strictly align to 8-byte boundary
1. Add Pin defines for missing PWM pins
2. Update the hal to account for the number of PWM instances
3. Fix the register reload policy
4. Configure the XBAR to put the PWM fault inputs in inactive state
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
1. Added a flag to issue START command
2. Do not send START command inside i2c_start function as
the LPI2C hardware will issue a STOP on reception
of a NACK
3. Remove the i2c_address global variable, this is not
required
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
1. Remove the repeated_start flag and code as this is not needed
for the LPI2C module
2. Enable the SION bit on the I2C pins
3. Enable 22K Pullup option of the I2C pins
4. Update the 0 byte write implementation to ensure the START
command gets flushed out of the FIFO
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Low power functions related to powering off FLEXSPI and SDRAM needs
to be copied to internal memory
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
This PR provides implementation of ticker_free() function for the following boards:
ARCH_PRO
EV_COG_AD3029LZ
EV_COG_AD4050LZ
K22F
K64F
K82F
KW24D
KW41Z
LPC546XX
NRF51_DK
NRF52_DK
NUCLEO_F207ZG
NUCLEO_F401RE
NUCLEO_F429ZI
NUCLEO_F746ZG
REALTEK_RTL8195AM
1. Add the IVT header to the binary as this is required for boot up
This was earlier added by the DAPLink firmware. As it is no longer
handled in DAPLink, the header needs to be added inside mbed.
2. Update drivers
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
1. Problems were seen on the LPC54628 as the ADC clock source was too
high
2. Moved the pin configuration to set Analog mode to the end of the
function
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Patch to LPC546XX SDK code - write the low Ethernet MAC address
register last, as that synchronises the update.
Without this change, the ENET_SetMacAddr call only seems to work prior
to MAC initialisation, causing problems for the new mbed OS EMAC system,
which expects it to be changable later.
Updated emac greentea tests #6851.
Jimmy Brisson
Martin Kojtal
Mahesh Mahadevan
Cruz Monrreal II
David Saada
alrodlim
Deepika
Yossi Levy
Przemyslaw Stekiel
Bartek Szatkowski
Kevin Bracey