Commit Graph

1064 Commits (95b0a18ac575fa951963cf1fa22de9378cf671e0)

Author SHA1 Message Date
Martin Kojtal 5c46faeb86
Merge pull request #9417 from jeromecoutant/PR_DNSTIMEOUT
Netsocket DNS test: increase timeout value
2019-01-21 13:42:24 +01:00
Martin Kojtal 27cce81580
Merge pull request #9258 from jeromecoutant/PR_FLASHSKIP
FLASH test: skip test if test region overlaps code
2019-01-21 13:15:51 +01:00
Seppo Takalo 6b92d32b3e Fix TCPSOCKET_ENDPOINT_CLOSE: Cannot accept WOULD_BLOCK
This testcase uses Socket in blocking mode, and therefore
WOULD_BLOCK should not be accepted.
The logic was wrong anyway, because return value was tested
to be negative before testing with WOULD_BLOCK which is negative
as well.

Also replaced TEST_FAIL() macro with TEST_ASSERT_EQUAL() to
make the return code visible in test log.
2019-01-21 10:46:11 +02:00
Filip Jagodzinski 5840281682 ROTS: SysTimer: Fix test timing issues
Use a busy loop with non-blocking Semaphore::wait(0) calls instead of a
single Semaphore::wait(osWaitForever) to improve time measurement
accuracy. Looping in Semaphore::wait(0) prevents the board from entering
sleep or deepsleep modes while waiting for the semaphore. By skipping
the overhead wakeup time, we get more accurate timings.
2019-01-18 17:10:39 +01:00
Cruz Monrreal 68deb05d1b
Merge pull request #9376 from michalpasztamobica/tcpsocket_greentea
TCP/UDP greentea tests refactoring and cleanup
2019-01-17 21:52:40 -06:00
Cruz Monrreal 436d3d043d
Merge pull request #9257 from jeromecoutant/PR_FLASHIAP_TIMING
FLASHIAP test: skip test if test region overlaps code
2019-01-17 21:50:20 -06:00
jeromecoutant 3a190656fa Netsocket DNS test: increase timeout value 2019-01-17 17:39:43 +01:00
Seppo Takalo 26dcd0d90a Allow NSAPI_ERROR_UNSUPPORTED from Socket::setsockopt() 2019-01-17 18:02:04 +02:00
Michal Paszta 6e629e1ba6 Gemalto Crinterion UDP test adjustments
Adjusting the tests to match the cellular modems ELS61-E2 and BGS2-W requirements.
2019-01-15 12:38:48 +01:00
Michal Paszta 59e8dedb67 TCP/UDP greentea tests refactoring and cleanup 2019-01-15 10:00:35 +01:00
Alexander Zilberkant 435d944dd0 fix its_reset test 2019-01-13 18:30:22 +02:00
Przemyslaw Stekiel ef681bf18d Add SPDX-License-Identifier and Copyright in new files 2019-01-08 15:32:08 +01:00
Przemyslaw Stekiel 01ca8443a8 Add stack size unification test
Test checks stack sizes:
 - ISR stack: exactly 1KB (with exception for NORDIC - 2KB and RENESAS - Cortex A targets not supported for this test)
 - Main thread stack: exactly 4KB (with some exceptions - 3KB)
 - Thread stack: exactly 4KB
2019-01-08 15:32:01 +01:00
jeromecoutant 482396ce7d FLASH test: skip test if test region overlaps code 2019-01-04 16:50:54 +01:00
jeromecoutant b712e71194 FLASHIAP test: skip test if test region overlaps code 2019-01-04 16:38:32 +01:00
Martin Kojtal acd69ae7e1
Merge pull request #9229 from maciejbocianski/qspi_hal_test_k82f_fix
hal-qspi_test: move frequency setting before flash init
2019-01-04 08:56:54 +00:00
Brian Daniels 5625b6964d Fix Python 3 syntax in rtc host test 2019-01-03 12:04:36 -06:00
Martin Kojtal cc89c20abc
Merge pull request #9175 from michalpasztamobica/greentea_ignore_unsupported
Greentea tests ignore bind returning UNSUPPORTED
2019-01-03 14:59:50 +00:00
Maciej Bocianski fc593d2d6f hal-qspi_test: move frequency setting before flash init
Frequency setting just after erase operation was causing some data
inconsistencies during write/read operations on some targets (frdm-k82f).
To fix this, frequency setting was moved before flash memory init.
2019-01-03 12:17:23 +01:00
Martin Kojtal d7497a82dd
Merge pull request #9128 from orenc17/spm_hal_test_fix
Fix SPM HAL test
2019-01-02 09:18:02 +00:00
Alexander Zilberkant b409267883
Update TESTS/mbed_hal/spm/main.cpp
Use r3 instead of r4

Co-Authored-By: orenc17 <oren.cohen@arm.com>
2018-12-23 11:37:29 +02:00
Martin Kojtal aceeb269d1
Merge pull request #9159 from SeppoTakalo/unflag_extented
Drop MBED_EXTENTED_TESTS flagging from network tests.
2018-12-20 16:29:51 +00:00
Michal Paszta a2110d5411 Greentea tests ignore bind returning UNSUPPORTED 2018-12-20 15:38:07 +01:00
Martin Kojtal ab1c2be997
Merge pull request #8957 from InfernoEmbedded/fix-8913
Fix incorrect #ifdefs on DEVICE_FOO macros
2018-12-20 10:52:06 +00:00
Martin Kojtal 85c2fc7fb1
Merge pull request #9148 from davidsaada/david_fix_app_end_addr
Fix FLASHIAP_ROM_END macro for GCC_ARM & IAR toolchains
2018-12-20 10:48:26 +00:00
Alastair D'Silva 2617c5d55b Don't use define checks on DEVICE_FOO macros (mbed code)
The DEVICE_FOO macros are always defined (either 0 or 1).

This patch replaces any instances of a define check on a DEVICE_FOO
macro with value test instead.

Signed-off-by: Alastair D'Silva <alastair@d-silva.org>
2018-12-20 10:16:42 +11:00
Seppo Takalo 18404e93be Drop MBED_EXTENTED_TESTS flagging from network tests.
All properly working IP stacks are required to pass Mbed OS socket tests.
This have now proven with current Ethernet devices with LwIP stack.
2018-12-19 16:18:33 +02:00
David Saada f3bac3451c Fix FLASHIAP_ROM_END macro for GCC_ARM & IAR toolchains
- Consider data section in GCC_ARM toolchain
- Consider init_array section in IAR toolchain
- Rename macro to FLASHIAP_APP_ROM_END_ADDR for clarity sake
2018-12-19 12:05:08 +02:00
Cruz Monrreal 995725b50a
Merge pull request #9129 from jeromecoutant/PR_DNSDEBUG
DNS tests: improve debug messages
2018-12-18 14:26:35 -06:00
Cruz Monrreal f949ee5388
Merge pull request #9127 from jeromecoutant/PR_WIFIDEBUG
WIFI test: improve debug messages
2018-12-18 13:23:12 -06:00
jeromecoutant bd4b99c498 DNS tests: improve debug messages 2018-12-18 13:32:45 +01:00
Cruz Monrreal 80c6f5f8ee
Merge pull request #8972 from kjbracey-arm/merge_file_truncate
Merge feature-posix branch (FileHandle::truncate)
2018-12-17 14:49:56 -06:00
Cruz Monrreal eed3fb12c7
Merge pull request #9109 from kjbracey-arm/fseek_test_rework
Rework fseek/ftell tests
2018-12-17 14:43:06 -06:00
Oren Cohen 9b573acfa4 Run the non-secure cases first 2018-12-17 16:43:09 +02:00
Oren Cohen 6a9de3178e Fix SPM HAL test
When accessing non-secure ram and flash r1 was actually used by the calling function.
Change to a callee saved register.
2018-12-17 16:38:13 +02:00
jeromecoutant da6ad75666 WIFI test: improve debug messages 2018-12-17 15:20:02 +01:00
Kevin Bracey 7b5939c05b Add ftruncate / fstat(st_size) unit test 2018-12-14 19:29:29 +02:00
Kevin Bracey ff7a316a32 Rework fseek/ftell tests
ARM C library is really good at optimising out calls to underlying
seek. The only ones we were actually detecting in the empty file case
were the ones that the default FileHandle::size() made itself during
the SEEK_END case.

When we implement TestFile::size() directly, we will no longer see
a single seek call from the ARM C library in the empty file case, so
remove those tests.

Beef up the non-empty file case, adding checks that we are making
underlying read+write calls in the correct position, as a proxy for
direct checks for underlying seek being called.
2018-12-14 19:29:27 +02:00
Cruz Monrreal 64e7e468b2
Merge pull request #9089 from jeromecoutant/DEV_QSPI_TEST
STM32 QSPI update
2018-12-14 10:14:13 -06:00
Conrad Braam 3b138fba02 Fix long writes/reads stack overflowing (#8802)
* writes and reads queue, not overflow stack IOTPAN-295
2018-12-13 18:18:01 -06:00
jeromecoutant 84ee55bfe0 QSPI tests: update STM32 boards configuration
NB: STM directory removed in flash_configs as there is no STM memory
2018-12-13 10:56:35 +01:00
jeromecoutant 0af1ecd305 STM32 DISCO : enable QSPI tests when available 2018-12-13 10:56:27 +01:00
Kari Haapalehto e502675bd1 Fix test-netsocket-tcp greentea test build fails.
main.cpp was missing comma at the end of line.
2018-12-11 12:51:30 +02:00
Cruz Monrreal 89527604ae
Merge pull request #9033 from fkjagodzinski/fix-stream
Fix Stream for IAR toolchain
2018-12-10 19:20:06 -06:00
Filip Jagodzinski 91e9010dd2 Tests: Stream: Use a quote from C99 spec
Use C99 instead of Linux man entry.
2018-12-10 16:30:16 +01:00
Kevin Bracey 13a24bc0bd Test MPU is enabled by init 2018-12-10 16:45:30 +02:00
Filip Jagodzinski 5c9cc5b8f1 Tests: Stream: Add more test cases 2018-12-10 12:09:22 +01:00
Michal Paszta c48312ded4 Missing socket greentea tests implementation 2018-12-07 10:35:39 +01:00
Cruz Monrreal 035e8e0b77
Merge pull request #8964 from kfnta/parser_empty_tests
Correct behavior of PSA code generator
2018-12-06 21:25:42 -06:00
Cruz Monrreal 78d6018ecc
Merge pull request #8745 from kfnta/feature-new-target-future-sequana-psa
Add new target future sequana PSA
2018-12-06 13:13:36 -06:00
Oren Cohen 935f2bdfbc Correct behavior of PSA code generator
* Don't generate files if a test does not contain additional partitions
2018-12-06 18:17:09 +02:00
Oren Cohen cb58b34581 Prebuilt images 2018-12-06 11:33:35 +02:00
Oren Cohen 2df2fc7d29
Fix PSA-HAL, TRNG, TLS tests 2018-12-06 01:22:50 +02:00
Oren Cohen 51a462aeea Use entropy injection on any NVseed platform or PSA dual-core/v8 2018-12-05 20:08:35 +02:00
Oren Cohen 870bebc9ac fix mbedmicro-rtos-mbed tests 2018-12-05 19:59:54 +02:00
Oren Cohen 86c7a59b36 Basic test can run on single v7's 2018-12-05 15:37:52 +02:00
Alex Volinski d614fd8955 The inject test can run also on single core CPU's such as K64F 2018-12-04 17:07:28 +02:00
Oren Cohen c3bd6f12d2 Fix PSA crypto partiotion and tests
* Styling
* Correct error codes on failing connection
* Add panics where needed
* correct skip defines
* Fix psa_spm_init_refence_counter bug
2018-12-04 17:07:28 +02:00
Martin Kojtal 0df1d49ba1
Merge pull request #8861 from VeijoPesonen/bugfix-mbedgt_wifi_scan_one_ssid
Bugfix-tests-network-wifi drop the assumption about more than one SSID
2018-12-03 13:34:48 +01:00
Martin Kojtal ba6b36cb3b
Merge pull request #8754 from itayzafrir/mbed-crypto-tests
Mbed Crypto Tests
2018-11-30 14:54:02 +01:00
Oren Cohen 01301387f8 Run SPM code generator 2018-11-28 14:40:01 +02:00
Oren Cohen 45bd4f305a Add SPM code generation test to Travis-CI 2018-11-28 14:38:44 +02:00
Martin Kojtal 52822cb8af
Merge pull request #8871 from c1728p9/mpu
MPU API (Reopened)
2018-11-28 10:28:32 +01:00
Martin Kojtal e62abd8aee
Merge pull request #8804 from mohammad1603/inject_entropy_spm
PSA Crypto SPM
2018-11-28 09:40:31 +01:00
Martin Kojtal e69aa15aea
Merge pull request #8744 from kfnta/psa_spm_base
PSA Secure partition manager and services
2018-11-27 15:26:38 +01:00
Netanel Gonen 5f36447eb6 do not run crypto init SPM test if not SPM target 2018-11-27 15:29:14 +02:00
Alexander Zilberkant daeb19d167 Fix entropy_inject test compilation
Include to crypto.h file will fail on targets without TARGET_PSA support
Moving prerequisites check before include.
2018-11-27 11:57:01 +02:00
Alexander Zilberkant abf1ccc722 Disable crypto_init tests when Mbed Crypto is OFF 2018-11-27 11:57:00 +02:00
mohammad1603 88f4f48fac Astyle fixes for the source
Used running: astyle -n --options=.astylerc
2018-11-27 11:56:57 +02:00
Netanel Gonen 59c3c9fff7 crypto init with multiple client guard & tests 2018-11-27 11:56:48 +02:00
Netanel Gonen 73cb013ac6 skip inject entropy test if they not supported 2018-11-27 11:56:43 +02:00
Mohammad AboMokh 73ebe1a247 Fix inject entropy tests
* Call greentea_case_teardown_handler() and greentea_case_setup_handler() instead of return STATUS_CONTINUE
* Introduce and use new macro MBEDTLS_PSA_INJECT_ENTROPY_MIN_SIZE
2018-11-27 11:56:37 +02:00
Mohammad AboMokh 72037747b1 Update auto generated SPM files 2018-11-27 11:56:35 +02:00
Mohammad AboMokh 1325084b1a Add tests to PSA entropy injection 2018-11-27 11:56:33 +02:00
Oren Cohen f4581faab0 Create a new partition for the crypto service
The following files initially were taken
from https://github.com/ARMmbed/psa-crypto-spm/releases/tag/spm-crypto-5.11
* crypto_platform_spe.h
* crypto_struct.h
* crypto_struct_ipc.h
* psa_crypto_spm.c
* crypto_spe.h
* crypto_partition_psa.json

The rest of the files were autimatically generated
by tools/spm/generate_psa_partition.py
2018-11-27 11:56:29 +02:00
itayzafrir 1431e216ad Skip Mbed Crypto tests when when Mbed Crypto is OFF 2018-11-27 11:56:25 +02:00
Oren Cohen 3e88dcf177 Test modifications
* Add support for entropy injection
* Move psa_crypto_init & mbedtls_psa_crypto_free to setup & teardown handlers
* Skip test_crypto_asymmetric_encrypt_decrypt if RSA generation is not supported
2018-11-27 11:54:10 +02:00
Russ Butler 7cdfbee28b Fix asyle problems
Run astyle to fix CI failures.
2018-11-27 09:29:33 +00:00
Russ Butler caa7b93921 Rename lock functions and classes
Invert the name of the lock functions and classes so you are not
locking a negative.
2018-11-27 09:29:32 +00:00
Russ Butler a7bf312106 Skip MPU fault tests for ARMv8-M
For enhanced security ARMv8-M firmware doesn't allow the hardfault
handler to be hooked by non-secure code. Because of this there is no
way to recover from the MPU fault tests. This PR disables those tests
until hardfault recovery is supported by secure firmware.
2018-11-27 09:29:32 +00:00
Russ Butler 47ac8ef3f0 Fix MPU test when MemManage fault enabled
Hook both the HardFault and the MemManage IRQs since it is up to the
target to determine which fault is enabled.
2018-11-27 09:29:32 +00:00
Russ Butler 24f002d6dc Clear caches before RAM execution in MPU test
Ensure that code written to ram is flushed and that caches are cleared
before attempting to executing from ram. This fixes CI failures on the
MPU test when it is built for Cotex-M7 devices such as the
NUCLEO-F746ZG.
2018-11-27 09:29:32 +00:00
Russ Butler 1821d37621 Overhaul MPU for new requirements
Make the following changes:
-Allow a vector specific ARM MPU driver by defining MBED_MPU_CUSTOM
-Allow ROM address to be configured for ARMv7-M devices by
    setting the define MBED_MPU_ROM_END
-Add ROM write protection
    -Add new functions and lock
    -enable at boot
    -disable during flash programming
2018-11-27 09:29:32 +00:00
Russ Butler 7283f9b0ee Add a formal HAL specification for the MPU API
Add a formal HAL specification consisting of:
-defined and undefined behavior
-test descriptions
-enable doxygen for MPU
2018-11-27 09:29:32 +00:00
Russ Butler d00f59fdc8 Rework MPU layout for future changes
Create a dedicated MPU directory for standard Arm MPU implementations
in preparation for the Arm v8m MPU. Replace MBED_MPU_ENABLED with
DEVICE_MPU to align with the porting layer of other HAL APIs.
2018-11-27 09:29:31 +00:00
Russ Butler c0ff98614a Disable the MPU when flashing
When programming flash using the FlashIAP API allow execution from
ram. Many devices require flashing to be done from RAM.

Also allow execution from ram when running the low level flash tests.
2018-11-27 09:29:31 +00:00
Russ Butler 8e2fd1a5cc Add an MPU test
Test that the MPU correctly stops execution of memory in the stack
region, heap region, data region and bss region. Also check that the
MPU can be enabled, disabled and freed.
2018-11-27 09:29:31 +00:00
Oren Cohen aea9713c89 Doxygen fixes in tests 2018-11-27 09:16:47 +02:00
Oren Cohen 773ac8dd95 CR fixes 2018-11-27 09:16:45 +02:00
Alexander Zilberkant 2b9f94a0ad Remove dead code 2018-11-27 09:16:45 +02:00
Oren Cohen 6cd4f7789f Add Version to SPM templates and generator 2018-11-27 09:16:43 +02:00
Oren Cohen 53be3cccfc Fix the SPM HAL test 2018-11-27 09:16:41 +02:00
Alexander Zilberkant 9cc017fd48 Normalize license headers
- add SPDX license identifier
- add missing license headers
- update year in license headers
2018-11-27 09:16:40 +02:00
Alexander Zilberkant aea01a86f6 astyle changes 2018-11-27 09:16:38 +02:00
Oren Cohen dd73fa689c PSA SPM
* Intorduce PSA-SPM to mbed-os
* Add SPM tests (for PSA targets)
* Add PSA PRoT internal storage Secure implementation
* Integrate SPM into the boot proccess
* PSA manifest data generator
* Introduce PSA targets skeleton to mbed-os
* Add artifact delivery to the tools
2018-11-27 09:16:35 +02:00
itayzafrir 7fa969f53d Add license 2018-11-26 19:23:17 +02:00
itayzafrir c3a8659c0f Add mbed-crypto key derivation test 2018-11-26 19:23:16 +02:00
itayzafrir 680d9830d1 Add mbed-crypto asymmetric sign verify test 2018-11-26 19:23:16 +02:00
itayzafrir ff3a36abcb Add mbed-crypto symmetric cipher encrypt decrypt test 2018-11-26 19:23:15 +02:00
itayzafrir 29bcb2e327 Add mbed-crypto hash verify test 2018-11-26 19:23:14 +02:00
itayzafrir 118f353e17 Add mbed-crypto asymmetric encrypt decrypt test 2018-11-26 19:23:14 +02:00
itayzafrir f81bb47ffd Introduce mbed-crypto tests
Add tests setup code and random bytes generator test.
2018-11-26 19:23:13 +02:00
deepikabhavnani c272377a81 Make sure no memory overhead if statistics are disabled 2018-11-26 09:42:45 -06:00
deepikabhavnani 068f2d14c0 Resolve IAR build issue
IAR not able to assign default zero value in array and complaints of
internal error as below:

[ERROR] Internal error: [Front end]: assertion failed at:
"..\..\Translator\compiler_core\src\parser\edg\decl_inits.c", line 2031
2018-11-26 09:42:45 -06:00
deepikabhavnani 117eb0bc87 Add socketstats stub functions for unittest and addressed reviews 2018-11-26 09:42:50 -06:00
Deepika f6c1a40b29 Add config options for socket statistics
1. MBED_CONF_NSAPI_SOCKET_STATS_ENABLE to enable the statistics
2. MBED_CONF_NSAPI_SOCKET_STATS_MAX_COUNT max sockets statistics cached
2018-11-26 09:42:45 -06:00
Deepika a851df66e3 Code/bug after testing
1. Fixing astyle and docs
2. Extra mutex lock was removed
3. Bytes are updated when send/recv > 0 and not in case of -ve error
4. Review comments
5. Guard statistics implementation in test with MBED_NW_STATS_ENABLED
2018-11-26 09:42:45 -06:00
Deepika eec54a0fc9 Update tcp test cases to verify network socket statistics
Cases Updated are:
1. TCPSOCKET_ECHOTEST_NONBLOCK
2. TCPSOCKET_OPEN_CLOSE_REPEAT
3. TCPSOCKET_OPEN_LIMIT
2018-11-26 09:42:45 -06:00
Deepika e7ea2927fc Update udp test cases to verify network socket statistics
Cases Updated are:
1. UDPSOCKET_ECHOTEST_NONBLOCK
2. UDPSOCKET_OPEN_CLOSE_REPEAT
3. UDPSOCKET_OPEN_LIMIT
2018-11-26 09:42:45 -06:00
Martin Kojtal fdca1e3578
Merge pull request #8730 from kfnta/its_kvstore_single_core
Add a new PSA Internal Trusted Storage APIs
2018-11-26 11:54:08 +01:00
Michael Schwarcz aa7e1ce0e5 Fix its tests in non-psa targets 2018-11-25 09:57:23 +02:00
Alexander Zilberkant 9b13e240c3 Add SPDX license identifier 2018-11-25 09:57:23 +02:00
Alexander Zilberkant 9fa1f5a3d5 astyle changes 2018-11-25 09:57:22 +02:00
Danny Shavit 53728e45b7 Add a new PSA Internal Trusted Storage APIs 2018-11-25 09:57:22 +02:00
Martin Kojtal c873dc06f2 Merge branch 'ONME-3983' of https://github.com/mtomczykmobica/mbed-os into dev_rollup 2018-11-24 21:14:47 +00:00
Martin Kojtal b16569dc3f
Merge pull request #8838 from 0xc0170/dev_rollup
Rollup v2 for 5.11rc1
2018-11-24 21:37:02 +01:00
Veijo Pesonen 386915deb8 Tests-network-wifi organize test cases for clarity 2018-11-24 12:28:14 +02:00
Veijo Pesonen 50bc2e9280 Bugfix - drops the assumption that there is more than SSID in vicinity 2018-11-24 12:20:07 +02:00
Martin Kojtal 52aea31655
Merge pull request #8702 from SenRamakri/sen_CrashReportingImpl
Crash Reporting implementation
2018-11-23 20:24:53 +01:00
Martin Kojtal 80ed251c9c Merge branch 'fix_travis_astyle_files' of https://github.com/0xc0170/mbed-os into dev_rollup 2018-11-23 18:38:13 +00:00
Martin Kojtal 36bc2efdec Merge branch 'greentea_improvements' of https://github.com/michalpasztamobica/mbed-os into dev_rollup 2018-11-23 18:37:52 +00:00
Martin Kojtal 5b42e2886f
Merge pull request #8607 from aashishc1988/ram_rom_fetch
Fetch ram/rom start/size
2018-11-22 10:49:50 +01:00
Martin Kojtal c1d00df79a test: fix coding style 2018-11-20 14:50:56 +00:00
Martin Kojtal 00c5b56e32
Merge pull request #8683 from NXPmicro/feature-qspi-lpc546xx
Feature qspi lpc546xx
2018-11-19 13:11:44 +00:00
Michal Paszta e53ee631f9 Greentea netsocket and network tests improvements
Added smarter rounding of times in recv_timeout and increased the delta by one, to allow "off-by-one" errors.
Reverted commit 88eea6a, reducing TESTS_TIMEOUT back to 480.
Introduced a 100ms timeout for waiting on asynchronous DNS resolution.
Improved error handling on disconnects.
2018-11-19 08:58:14 +01:00
Senthil Ramakrishnan f59b99d889 Removing support for printing error-report after reboot and other minor fixes 2018-11-18 22:42:37 -06:00
Senthil Ramakrishnan 423b52e1c3 Fix crc calculation error, code-style issues and other fixes 2018-11-16 17:24:52 -06:00
Senthil Ramakrishnan 4ec30e3e8f Added greentea test 2018-11-16 14:00:00 -06:00
Aashish chaddha 329c553595 ifdef ram/rom size/start in case they dont exist 2018-11-16 09:38:26 -06:00
Mahesh Mahadevan 6bd0be186b Add MT25Q Flash config
Signed-off-by: Maciej Bociański <maciej.bocianski@arm.com>
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2018-11-16 08:15:48 -06:00
Mahesh Mahadevan c21c599b25 Update the QSPI unit test for NXP LPC546XX board
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2018-11-16 07:56:30 -06:00
Cruz Monrreal II 5c1c7bf71f Merge branch 'fix_astyle_error' of ssh://github.com/0xc0170/mbed-os into rollup-b.1 2018-11-15 18:26:09 -06:00
Marcin Tomczyk d3812f3740 ONME-3983 Fix the defects found in IPV4 testing against packet dropping 2018-11-15 13:47:43 +01:00
Martin Kojtal ef728d01dc tests: fix doxygen style 2018-11-15 07:20:12 +00:00
Martin Kojtal 501bc29426 rtc time test: fix coding style 2018-11-15 07:20:09 +00:00
Deepika e3c4dae875 Add tests to verify RAM/ROM sizes 2018-11-14 09:51:53 -06:00
Marcin Tomczyk 29b7c50e30 ONME-3852 Check that test cases disconnect at the end 2018-11-12 11:29:58 +01:00
Cruz Monrreal 9d95d46d6c
Merge pull request #8591 from 0xc0170/fix_coding_style_features
features: fix coding style
2018-11-09 09:40:56 -06:00
Cruz Monrreal e635613b28
Merge pull request #7849 from TacoGrandeTX/fix_rtc_settime
Low power timer needs to be reset when setting time
2018-11-08 10:50:04 -06:00
Cruz Monrreal 3046e31349
Merge pull request #8589 from davidsaada/david_flash_erase_value
Support erase value in Flash HAL drivers, FlashIAP and block devices
2018-11-08 10:06:58 -06:00
Martin Kojtal 937d68f0fd
Merge pull request #8645 from mtomczykmobica/ONME-3733
Detect xinetd service pattern and generate correct pattern (ONME-3733)
2018-11-08 15:19:19 +01:00
Martin Kojtal 28a5906479 tests: fix coding style 2018-11-08 08:54:34 +00:00
David Saada 542744d03c Support erase value in Flash HAL drivers, FlashIAP and block devices 2018-11-07 14:23:07 +02:00
Marcin Tomczyk 5eabfabc51 ONME-3733 detect xinetd service pattern and generate correct pattern 2018-11-07 13:18:04 +01:00
RFulchiero 0de5ab2686 Add a protected HAL set_time() test
When DEVICE_LPTICKER is defined set_time() only works correctly on
the first call. This test calls set_time() twice and ensures the
time set by both calls is correct.  This test only runs if
DEVICE_RTC or DEVICE_LPTICKER is defined.
2018-11-01 17:17:56 -05:00
Seppo Takalo e3623b91fa Increase EMAC test timeout to 1400 seconds 2018-10-31 17:14:05 +02:00
Cruz Monrreal 5ed07c2dd4
Merge pull request #8328 from kjbracey-arm/noreturn
Error path tightening: use MBED_NORETURN; add+use core_util_atomic_flag
2018-10-29 20:49:54 -05:00
Cruz Monrreal c9eaddd7e0
Merge pull request #8487 from kegilbert/mbed_mem_trace_config_patch2
Update mbed_mem_tracing config option
2018-10-29 18:53:25 -05:00
Kevin Bracey 0b27736536 Remove sleep manager tests that trigger mbed_error
Intercepting mbed_error will be too hard after mbed_error becomes
[[noreturn]], so remove tests that do this.
2018-10-29 13:58:05 +02:00
Kevin Bracey 1397eb5110 Disable RTOS error tests if error traps are enabled
It will be too hard to try to intercept and continue from a trapped
error once error functions are marked [[noreturn]], so make the error
return tests conditional on error trapping being disabled.
2018-10-29 11:56:17 +02:00
kegilbert a2ac895c37 This reverts commit 9b53d1256fb358407acbaf81c70b71d937b1f7cd.i
Move the memory tracing enabled macro to a config option but
revert the !defined -> #if changes to no longer cause breaking
changes.
2018-10-26 17:35:33 -05:00
Cruz Monrreal II 14ce8f2721 Merge branch 'fix-freestanding-tests-module' of ssh://github.com/pan-/mbed into rollup 2018-10-26 11:42:59 -05:00
Martin Kojtal f90f1fc01d sleep test: fix coding style 2018-10-25 09:58:18 +01:00
Martin Kojtal bbfa322afb tests: fix astyle 2018-10-25 09:58:17 +01:00
Vincent Coubard 85bd15ce6e Doxygen: Move free standing HAL tests module inside their related HAL module. 2018-10-24 14:42:29 +01:00
Martin Kojtal 5bed419dd8
Merge pull request #8505 from SeppoTakalo/continue_socket_tests
Continue Socket and WiFi tests even on test failure.
2018-10-24 09:40:22 +01:00
Cruz Monrreal 0db896036c
Merge pull request #8485 from NXPmicro/feature-qspi-kinetis
Feature qspi kinetis
2018-10-23 12:38:11 -05:00
Cruz Monrreal 5b7f4a3ed8
Merge pull request #8476 from VeijoPesonen/tc-ipcore-wifi-wifi_connect
mbedgt-network-wifi WIFI CONNECT TC - check that SSID is cached
2018-10-23 09:07:25 -05:00
Seppo Takalo 66a2101006 Continue Socket and WiFi tests even on test failure.
Purpose is to run full set of testcases on each run.
Testcases should contain proper cleanup handlers so that they are
independent.
2018-10-23 13:58:21 +03:00
Cruz Monrreal b09a843c44
Merge pull request #8482 from adustm/mbedtls_test_fix_typo
[tests-mbedtls-multi] Fix typo in the printf (no functional change)
2018-10-22 11:40:15 -05:00
Cruz Monrreal 1123c2bf9d
Merge pull request #8377 from mprse/fix_for_issue_8368
Fix for issue #8368
2018-10-22 11:32:42 -05:00
Mahesh Mahadevan 86ae041b7a Update the QSPI unit test for Freescale boards
1. Add flash config files.
2. Flash used is MX25U3235F, include information for this
   device in the flash config file

Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2018-10-19 10:34:12 -05:00
adustm e775990c6a Fix typo in the printf (no functional change) 2018-10-19 14:15:53 +02:00
Veijo Pesonen f9a723e8ad mbedgt-network-wifi WIFI CONNECT TC - check that SSID is cached by driver 2018-10-19 09:09:34 +03:00
Veijo Pesonen 0823b3ef2d mbedgt-network-wifi WIFI CONNECT TC - check for empty passwd 2018-10-18 14:12:53 +03:00
Deepika 9db31d299b Resolve build issues in test
mbed.h was added in test, via greentea and utest header files. 'mbed.h' is removed
from header files and required header file and namespace is added to CPP/C files
2018-10-16 11:50:16 -05:00
Cruz Monrreal ec03df4823
Merge pull request #7980 from kjbracey-arm/thread_deprecations
Clean up rtos::Thread deprecation warnings
2018-10-15 10:09:55 -05:00
Cruz Monrreal 8bf51be75a
Merge pull request #8230 from mprse/issue_8214_fix
Fix for issue #8214
2018-10-12 21:24:08 -05:00
Cruz Monrreal 6d7b655b87
Merge pull request #8331 from deepikabhavnani/getc_fix
Stream: add necessary flushes, removing unneeded IAR workaround
2018-10-12 08:59:16 -05:00
Kevin Bracey 1ef213ec89 Clean up Thread deprecation warnings
Static Thread methods and signal methods have been deprecated. Remove
all references in the main code, and most of the tests. Some tests of
the deprecated APIs themselves remain.
2018-10-12 14:57:13 +03:00
Anna Bridge 24857d0f91
Merge pull request #5285 from c1728p9/minimum_requirements_test
Update devices to have minimum 2K RAM and heap, also added test
2018-10-12 11:04:57 +01:00
Przemyslaw Stekiel 4a3bcee602 tests-mbed_hal-rtc_time: use templates instead of global variable 2018-10-11 11:59:01 +02:00
Przemyslaw Stekiel 8d57429de4 tests-mbed_hal-rtc_time: alocate required test data on stack
This is fix for issue 8368.

Test is causing some problems on `REALTEK_RTL8195AM` and `ARM` compiler. There is some kind of memory issue. Probably there is not enough memory space for global data provided by the test. Data definitions have been moved into test function body so, they will land on stack. With this fix the test works on `REALTEK_RTL8195AM/ARM`.
2018-10-11 11:58:47 +02:00
Cruz Monrreal 5a47318bc2
Merge pull request #8298 from SeppoTakalo/wifi_reset_channel
Reset channel settings back to default
2018-10-10 08:44:39 -05:00
Filip Jagodzinski 3fcd8c4a3b Tests: SleepManager: Fix sleep_auto test
Use us & lp tickers directly, without the common ticker layer.
2018-10-09 17:52:45 +02:00
Filip Jagodzinski 9e34f76b4e Tests: Sleep: Extract test utility functions
Move a few of utility functions so other tests can use them.
2018-10-09 17:52:44 +02:00
Filip Jagodzinski f415af8147 Tests: SleepManager: Update test_check() test
Increase delta to 500 us. This value is still short enough to detect
incorrect behavior of the sleep_manager_can_deep_sleep_test_check() fun,
but allows the targets with low LP timer accuracy to pass, i.e.
NUCLEO_F429ZI.
2018-10-09 17:52:43 +02:00
Filip Jagodzinski 17e29618e6 Tests: SleepManager: Fix test suite setup
Use ticker init functions from upper HAL layer to allow proper handling
of ticker overflows.
2018-10-09 17:52:43 +02:00
Filip Jagodzinski 83745b99c5 Tests: SleepManager: Add test for new check() fun
sleep_manager_can_deep_sleep_test_check() is intended to be used in test
code.
2018-10-09 17:52:43 +02:00
Filip Jagodzinski 43c22e4977 Tests: SleepManager: update concurrent test docs 2018-10-09 17:52:42 +02:00
Filip Jagodzinski f2c222be15 Tests: SleepManager: extend test suite
New test cases:
* "deep sleep lock/unlock"
* "deep sleep unbalanced unlock"
* "deep sleep locked USHRT_MAX times"
* "deep sleep locked more than USHRT_MAX times"
* "sleep_auto calls sleep/deep sleep based on lock"
2018-10-09 17:52:42 +02:00
Cruz Monrreal 15879f5273
Merge pull request #8241 from SeppoTakalo/fix_wifi_connect_params_fail
Fix WIFI_CONNECT_PARAMS_CHANNEL_FAIL testcase.
2018-10-08 10:16:37 -05:00
Cruz Monrreal 506dfca8d0
Merge pull request #8235 from VeijoPesonen/mbedgt-netsocket-tc-fixes
Mbedgt netsocket tc fixes
2018-10-08 10:14:52 -05:00
Deepika f79a354311 Replace fflush to fseek before writes
You are allowed in POSIX / ANSI C to read and write on the same stream, but you
have to do an fseek in between read and write call (getc->fseek->putc)

Thanks @Alex-EEE for sharing the fix: https://github.com/ARMmbed/mbed-os/pull/7749

Added test case for verification of the behavior
2018-10-05 14:29:15 -05:00
Martin Kojtal 9d39f233d2
Merge pull request #8257 from mprse/sleep_test_nrf52_dk_fix
tests-mbed_hal-sleep: finish UART transmission before sleep test
2018-10-05 17:27:39 +02:00
Martin Kojtal 8adb8c3049
Merge pull request #7917 from deepikabhavnani/heap_overhead
Add overhead count in heap stats
2018-10-05 15:29:18 +02:00
deepikabhavnani 5f5882830f Add `overhead_size` element to get the overhead of stats
Heap statistics are used for analysing heap stats, but it doesn't tell anything
about real heap usage or malloc overheads. Adding `overhead_size` element
will help users to get the real heap usage.
2018-10-03 16:41:24 -05:00
Shrikant Tudavekar dc8b1fa98f use forced_reset_timeout as delay after reset 2018-10-02 18:01:08 -05:00
Seppo Takalo 5fd04ff279 Reset channel settings back to default 2018-10-02 13:11:23 +03:00
Przemyslaw Stekiel 1fced21d3b tests-mbed_hal-sleep: add message with failure details 2018-09-30 19:31:50 +02:00
Cruz Monrreal b1b6399482
Merge pull request #8132 from VeijoPesonen/bugfix-tests-netsocket-tcp-stacksize
gt netsocket tcp -  increases threads' stack size
2018-09-27 17:53:54 -05:00
Cruz Monrreal f35975c782
Merge pull request #7926 from jamesbeyond/fm_test
Increase the timeout for rtostimer test to 10s
2018-09-27 10:20:30 -05:00
Cruz Monrreal 4403a561b3
Merge pull request #7890 from deepikabhavnani/cb_issue_7701
Circular buffer should use conditional statement instead of modulo
2018-09-27 10:20:05 -05:00
Veijo Pesonen c4546910d1 Increases stack size for threads used in gt netsocket tcp test cases
Stack size is insufficient for debug profile
Stack size is insufficient for NUCLEO_F401RE+IDW01M1
Please see https://github.com/ARMmbed/wifi-x-nucleo-idw01m1/issues/17
2018-09-27 09:13:11 +03:00
Przemyslaw Stekiel 25b23a9286 tests-mbed_hal-sleep: finish UART transmission before sleep test
There is no problem with this test during the morph, but some issue has been noticed while testing new Jenkins CI in Oulu on NRF52_DK.
I was able to reproduce the issue locally. The difference between morph and local run is that CPU statistics are enabled on morph. This makes the difference and test passes.

The sleep test case perform sleep for 100 us, 200 us, ... ,1000 us in loop (us ticker wakes the board) and verifies if sleep time matches the assumption.
I got the following results:

sleep                 wake-up after
100 us                   ~100 us    ok
200 us                   ~200 us    ok
300 us                   ~300 us    ok
400 us                   ~400 us    ok
500 us                   ~14 us     (??)

When requested sleep time is equal to 500 us some unexpected interrupt occurs which wakeup the board and force the test to fail.
Register state just after exit from sleep:
Control and State Register: 0x00400000 (ISRPENDING - Interrupt pending flag is set).
NVIC Interrupt Set-pending Register[0]: 0x00000004 (UARTE0_UART0_IRQn) or 0x00000200 (TIMER1_IRQn - timer used by us ticker).

UART interrupt is generated because of green-tea transmission. We know that it is performed while test is executed since we need to wait before going into deep-sleep since otherwise the transmission will be broken. So to take care of UART interrupt we need to wait before sleep test in the same way like it is done in deep-sleep test.
2018-09-26 14:29:14 +02:00
Martin Kojtal a0a9b54e97
Merge pull request #7057 from theamirocohen/trng_test
Add TRNG API test
2018-09-26 09:48:36 +02:00
Amir Cohen e92f41a8a4 Fix print error 2018-09-25 15:30:29 +03:00
Seppo Takalo e7924a98b2 Fix WIFI_CONNECT_PARAMS_CHANNEL_FAIL testcase.
Test case was assuming that secure and unsecure SSID were on different
channels.
This is not a requirement and it should be OK to run on same channel.

Fixed the testcase by using +1 on channel number to get a wrong channel.
2018-09-25 14:11:22 +03:00
Veijo Pesonen d302a62e60 Drops removed mbedgt-netsocket cases from test specification 2018-09-25 11:52:50 +03:00
Veijo Pesonen 6ac099ab1a Makes mbedgt-network-wifi case to skip channel number check
2.4GHz and 5GHz channels might be using the same SSID. Wifi scan
might also fail occasionally to find secure- and unsecure channels
on same scan so lets not assume that we'll find both.
2018-09-25 09:29:53 +03:00
Veijo Pesonen b355c750a6 Makes mbedgt-netsocket cases to accept port 0 as destination 2018-09-25 09:29:53 +03:00
Russ Butler 000ee90bfe Add a minimum requirements HAL test
Add a test to ensure that devices have at least 2K free ram
and 2K free heap. This test should be the first test that fails
due to running out of ram or heap.
2018-09-24 13:54:56 -05:00
Przemyslaw Stekiel 6d5e21741c Fix for issue #8214
Change the base time value to more realistic:
START_TIME = 1537789823 # GMT: Monday, 24 September 2018 11:50:23

This fix has been proposed by STM in order to enhance test efficiency.
Current test version did not detect problem with RTC reset on F1 family boards since the base time was too small.
2018-09-24 14:05:12 +02:00
Martin Kojtal ab882c3416
Merge pull request #8030 from OpenNuvoton/nuvoton_fix_common_tickers_fail
Nuvoton: Fix Greentea test common_tickers failed
2018-09-21 14:55:28 +02:00
Martin Kojtal cbb676ccbd
Merge pull request #8060 from SeppoTakalo/documentation_update
Clarify test configuration in Socket/Networking test document
2018-09-21 09:40:59 +02:00
Martin Kojtal 6a34251b07
Merge pull request #7925 from maciejbocianski/qspi_hal_test_refactoring
Qspi hal test refactoring/update
2018-09-21 09:40:10 +02:00
Cruz Monrreal c005ba24ff
Merge pull request #8171 from SeppoTakalo/skip-dns-test
Skip the unstable SYNCHRONOUS_DNS_CACHE testcase
2018-09-20 13:59:17 -05:00
Seppo Takalo 558b579a8d Remove the unstable SYNCHRONOUS_DNS_CACHE testcase
Will be reverted once the test case is fixed
2018-09-20 10:59:20 +01:00
Martin Kojtal 0233c8df4c
Merge pull request #7882 from mikaleppanen/nw_if_gt_tests
Add greentea tests for network interface status and connect/disconnect
2018-09-19 14:20:07 +02:00
ccli8 4888ff2b11 Fix Greentea test common_tickers failed
1. Disable ticker interrupt which would interfere with fire_interrupt speed test
2. Enlarge test period to avoid timeout error
2018-09-18 10:57:14 +08:00
Martin Kojtal 10b5a3a9d8
Merge pull request #7960 from RonEld/set_NULL_as_platform_context
Change mbedtls_platform_context parameter to NULL
2018-09-17 14:30:03 +02:00
Cruz Monrreal 836eec00ae
Merge pull request #7945 from jarlamsa/synchronous_dns_cache
Move SYNCHRONOUS_DNS_CACHE test to extended set
2018-09-14 13:12:04 -05:00
Veijo Pesonen 88eea6a390 Testing with ESP8266's AT firmware v1.7 takes more time 2018-09-14 12:07:19 +03:00
Veijo Pesonen 24905f5b50 Declares gt netsocket test case buffers as static
Original patch https://github.com/ARMmbed/wifi-x-nucleo-idw01m1/issues/17
2018-09-14 12:03:36 +03:00
Seppo Takalo 5e9fb0d562 Clarify test configuration in Socket/Networking test document 2018-09-10 18:08:31 +03:00
Cruz Monrreal 920db63453
Merge pull request #7803 from SeppoTakalo/socket-test-plan
Add Socket test plan
2018-09-09 22:44:00 -05:00
Yossi Levy 79e51111cd Adding complete buffer print in case of failure. 2018-09-05 17:42:06 +03:00
Amir Cohen 6d8dab8e74 Fix trng_len loop 2018-09-05 17:36:55 +03:00
Amir Cohen 780d9c6dbf Remove NVstore unused mechanism 2018-09-05 17:36:54 +03:00
David Saada b2b14ca26f Fix TRNG test to use reset from python script and not from code 2018-09-05 17:36:53 +03:00
Amir Cohen 9b0b63169c Fix messages 2018-09-05 17:36:51 +03:00
Amir Cohen 11f1aaf978 Fix pithy library 2018-09-05 17:36:50 +03:00
Amir Cohen 5f7a6401b8 Fix Compilation problems 2018-09-05 17:36:49 +03:00
Amir Cohen 5256e963f0 Fix IAR issues 2018-09-05 17:36:48 +03:00
Amir Cohen 225a3bfb90 Erase debug prints 2018-09-05 17:36:47 +03:00
Amir Cohen 1f4405c644 Reduce Debug prints 2018-09-05 17:36:45 +03:00
Amir Cohen 1466518644 Fixing PR comments 2018-09-05 17:36:44 +03:00
Amir Cohen abe2b00fac Fix var declaration problem 2018-09-05 17:36:43 +03:00
Amir Cohen 6dadbd897a Repalce compression libs for license issues 2018-09-05 17:36:42 +03:00
Amir Cohen 4d1d1a0313 Fix lisence and style 2018-09-05 17:36:40 +03:00
Amir Cohen 669b618ea1 Add TRNG API test 2018-09-05 17:36:39 +03:00
Anna Bridge c2fdc0d972
Merge pull request #7423 from mprse/mutex_lock_assert
Fix issue #6872 - Mutex lock has possibility to fail at runtime (returning status flag)
2018-09-03 14:14:24 +01:00
Ron Eldor 5817d71ad8 Change mbedtls_platform_context parameter to NULL
Change the parameter being sent to `mbedtls_platform_setup()` and
`mbedtls_platfrm_teardown()` to NULL, as it is now being unused
in Mbed OS.
2018-09-03 08:38:57 +03:00
Cruz Monrreal 48232be98e
Merge pull request #7872 from kjbracey-arm/thisthread
Add ThisThread namespace and deprecate static Thread methods
2018-09-02 15:10:18 -05:00
Cruz Monrreal f82feecc51
Merge pull request #7822 from donatieng/nfc-impl
Add initial NFC support to Mbed OS
2018-08-31 19:01:25 -05:00
Cruz Monrreal 00b7700be2
Merge pull request #7875 from c1728p9/feature_CMSIS_5_0b521765
Update CMSIS to 5.4.0
2018-08-31 11:31:37 -05:00
Jarno Lamsa bc2166e62d Temporarily move SYNCHRONOUS_DNS_CACHE test to extended set until issues fixed with it 2018-08-31 16:12:51 +03:00
Maciej Bocianski cffd581308 qspi_hal_test - adjust used memory sector count
set flash sector count to 1024 for EFM32GG11_STK3701(MX25R3235F)
set flash sector count to 2048 for NRF52840_DK(MX25R6435F)
2018-08-31 11:27:42 +02:00
Maciej Bocianski 3a64383de5 fix qspi address sending for nrf52
fix address sending in qspi_command_transfer
now address is send MSB first
2018-08-31 10:48:37 +02:00
paul-szczepanek-arm be5527bca4 fix gt test 2018-08-30 08:37:00 +01:00
Maciej Bocianski c836b79e37 qspi_hal_test - remove unused variables 2018-08-30 07:39:41 +02:00
Cruz Monrreal 1e3e69463f
Merge pull request #7781 from deepikabhavnani/crc_safety
Add thread safety to CRC class
2018-08-29 15:42:23 -05:00
Donatien Garnier bfd433984f Re-run astyle 2018-08-29 16:59:45 +01:00
Maciej Bocianski b41ce6c090 qspi_hal_test - randomize flash RW addres
randomize flash address during test to extend flash life
2018-08-29 17:10:29 +02:00
Maciej Bocianski 82c81900bf qspi_hal_test add DPI and QPI support 2018-08-29 17:10:00 +02:00
Cruz Monrreal 7d871bfff5
Merge pull request #7879 from jarlamsa/synchronous_dns_tests
Add tests for synchronous dns
2018-08-29 09:38:41 -05:00
Qinghao Shi b98bd91a98 increase timeout for rtostimer test to 10s 2018-08-29 13:07:42 +01:00
paul-szczepanek-arm 57b6cca240 fixed define name for test 2018-08-29 10:48:41 +01:00
Maciej Bocianski db8cee04fc qspi_hal_test refactoring
- code refactoring and preparation for enabling DPI/QPI tests
- reduced multiple test count to 4
- use common flash config header for all MX25RXX35F chips
- fix sector erase max time on N25Q128A
2018-08-29 09:32:50 +02:00
Martin Kojtal 32445ae326
Merge pull request #7880 from juhaylinen/fix-greentea-emac-timeout
Update Greentea EMAC tests
2018-08-28 14:38:08 +02:00