Add 16-bit access mode when writing the transfer size to prevent
the QSPI transaction from starting
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Small space savings, the casting from int to float will bloat
the code a bit. Using wait(1.0f) for example would avoid it,
but seems a bit silly to use floats for anything unless
really needed (in embedded products).
While investigating the RX issue on NRF52_DK after SDK 14 updates,
it is observed that the RX FIFO doesn't get filled up, when the
flow control is disabled. Hence the readable never returns true.
If using Serial interface, the stdio file handles (0, 1, 2) get opened.
This results in configuring the flow control for STDIO, and it is observed
that the RX FIFO gets filled.
However, if RawSerial is used, the STDIO file handles
don't get opened. During the debug process it was observed that if the
flow control is configured once and then set to disabled, RX worked
as expected.
Alternative to this approach is that user application specifically
enables flow control as done in mbed's Greentea test suite. See https://goo.gl/r8nBYH
See https://goo.gl/8VB2qg step 14 for _initio's description.
See test code to reproduce the issue and test fix here: https://goo.gl/AQU1xG
Description
The change in behavior with NRF52's UART RX is documented here. #6891
This change is a fix for the above issue.
If the specified frequency exceeds the upper limit and lower limit at SPI driver, an error is output, but this does not match policy with other renesas drivers. Thus I revises the processing as follows.
- If "hz" is maximum over, it is rounded by the maximum value.
- If "hz" is minimum under, it is rounded by the minimum value.
For Arm toolchain build, Mbed 2(classic) programs occur an unexpected error if there is "#include "mem_XXXX.h"" in the script file.
It seems that the linker script can't find the include file because "mem_XXXX.h" file is not in the same path with the linker script.
(Refer to Issue #6975.)
To address this issue, I remove inclusion processing and define the related macros at ARMCC linker script file.
HEAP memory should be 4K aligned for GCC newlib, with ISR stack at the end of
RAM memory we loose 3K of RAM memory. This fix is for device with <16K RAM to
use RAM entirely.
Revert deprecation of FlashIAPBlockDevice 2 argument constructor has this was a breaking change. This follows a similar change in the external flashiap-driver repo.
--legacyalign, --no_legacyalign are deprecated from ARMC6 compiler, in order to
remove deprecated flags all linker files should strictly align to 8-byte boundary
--legacyalign, --no_legacyalign are deprecated from ARMC6 compiler, in order to
remove deprecated flags all linker files (GCC and IAR as well to have uniformity)
should strictly align to 8-byte boundary
--legacyalign, --no_legacyalign are deprecated from ARMC6 compiler, in order to
remove deprecated flags all linker files (GCC and IAR as well to have uniformity)
should strictly align to 8-byte boundary
--legacyalign, --no_legacyalign are deprecated from ARMC6 compiler, in order to
remove deprecated flags all linker files (GCC and IAR as well to have uniformity)
should strictly align to 8-byte boundary
--legacyalign, --no_legacyalign are deprecated from ARMC6 compiler, in order to
remove deprecated flags all linker files (GCC and IAR as well to have uniformity)
should strictly align to 8-byte boundary
--legacyalign, --no_legacyalign are deprecated from ARMC6 compiler, in order to
remove deprecated flags all linker files (GCC and IAR as well to have uniformity)
should strictly align to 8-byte boundary
--legacyalign, --no_legacyalign are deprecated from ARMC6 compiler, in order to
remove deprecated flags all linker files (GCC and IAR as well to have uniformity)
should strictly align to 8-byte boundary
--legacyalign, --no_legacyalign are deprecated from ARMC6 compiler, in order to
remove deprecated flags all linker files (GCC and IAR as well to have uniformity)
should strictly align to 8-byte boundary
--legacyalign, --no_legacyalign are deprecated from ARMC6 compiler, in order to
remove deprecated flags all linker files (GCC and IAR as well to have uniformity)
should strictly align to 8-byte boundary
--legacyalign, --no_legacyalign are deprecated from ARMC6 compiler, in order to
remove deprecated flags all linker files (GCC and IAR as well to have uniformity)
should strictly align to 8-byte boundary
--legacyalign, --no_legacyalign are deprecated from ARMC6 compiler, in order to
remove deprecated flags all linker files (GCC and IAR as well to have uniformity)
should strictly align to 8-byte boundary
--legacyalign, --no_legacyalign are deprecated from ARMC6 compiler, in order to
remove deprecated flags all linker files (GCC and IAR as well to have uniformity)
should strictly align to 8-byte boundary
--legacyalign, --no_legacyalign are deprecated from ARMC6 compiler, in order to
remove deprecated flags all linker files (GCC and IAR as well to have uniformity)
should strictly align to 8-byte boundary
--legacyalign, --no_legacyalign are deprecated from ARMC6 compiler, in order to
remove deprecated flags all linker files (GCC and IAR as well to have uniformity)
should strictly align to 8-byte boundary
Set the ISR stack to be 1KB. https://github.com/ARMmbed/mbed-os/pull/7238
Set the heap size to 3KB(2KB + overhead + spare) so that atleast 2KB free ram is
available for testing.
With dynamic heap size, explicit size is not required. IAR 7.8 supports
static heap, hence the change is needed in IAR linker files.
This fix avoid a long waiting loop in rtc_write function,
which was not acceptable in TICKLESS context.
Implementation comments added.
Global variable name has been updated for easier maintenance:
- LPTICKER_counter is the U32 continuous tick counter
- LPTICKER_RTC_time is the RTC time used to get the time difference
between rtc_read_lp() calls
Mahesh Mahadevan
Cruz Monrreal
Ashok Rao
Mac Lobdell
aqin
Martin Kojtal
Janne Kiiskila
bcostm
ccli8
jeromecoutant
Ganesh Ramachandran
Offir Kochalsky
Naveen Kaje
Lu
Anna Bridge
TomoYamanaka
Deepika
Yossi Levy
Amanda Butler