16a1693534
Move target files
2017-04-22 20:49:20 +03:00
189083eeb0
Add USB capabilities to NUCLEO-F446RE board
2017-04-22 20:47:55 +03:00
6a6455dfc2
Merge pull request #4031 from jeromecoutant/PR_IAR_BIG_HEAP
...
STM32 increase IAR heap size for big RAM targets
2017-04-20 15:50:21 +01:00
7bd8c32f2d
Merge pull request #4133 from u-blox/c030-debug-8mhz-xtal
...
U-BLOX_C030: Default XTAL is now 12MHz onboard. Option to use Debug 8MHz
2017-04-19 02:14:51 -05:00
029736612b
typo corrected
...
typo corrected
2017-04-11 21:28:11 +02:00
8c6dd8949b
Update flash_api.c
...
mbed_critical.h replaced with "platform/mbed_critical.h" (to match template)
typo corrected
2017-04-11 21:24:40 +02:00
b0451324c4
deprecated include updated
...
critical.h is deprecated, replaced with "platform/mbed_critical.h"
typo corrected
2017-04-11 21:23:19 +02:00
613cc3d6d9
STM32F4 Internal ADC channels rework
...
Internal ADC pin are now out of PinMap_ADC array.
2017-04-11 10:12:25 +02:00
2352ee49a4
Revert "STM32F4 Internal ADC channels rework"
2017-04-10 12:08:15 -05:00
0559aa431c
Merge pull request #4126 from jeromecoutant/PR_F4_PIN_LEVEL0
...
STM32F4 : remove SERIAL_TX and SERIAL_RX from available pins
2017-04-10 11:09:51 -05:00
bfb86a7f51
Merge pull request #4125 from jeromecoutant/PR_F4_USB_CONFIG_FILE
...
STM32 USB configuration file move
2017-04-10 11:07:59 -05:00
516f32fc86
Merge pull request #4118 from jeromecoutant/PR_REWORK_INTERNAL_ADC_F4
...
STM32F4 Internal ADC channels rework
2017-04-10 11:06:12 -05:00
a39ed809c4
U-BLOX_C030: Default XTAL is now 12MHz onboard. Option to use Debug 8MHz
...
XTAL by using Macro USE_DEBUG_8MHz_XTAL
2017-04-07 12:01:46 +01:00
7a35a4df51
Merge pull request #3992 from u-blox/c030-dev
...
Introducing UBLOX_C030 platform.
2017-04-06 11:07:58 -05:00
d740bde646
STM32F4 : remove SERIAL_TX and SERIAL_RX from available pins
...
Pins are used for debug printf
2017-04-06 13:58:06 +02:00
c2636b3269
STM32F4 USB configuration file move
2017-04-06 11:33:49 +02:00
d599579328
STM32F4 Internal ADC channels rework
...
Internal ADC pin are now out of PinMap_ADC array.
2017-04-06 10:59:49 +02:00
7387c09872
Introducing UBLOX_C030 platform.
2017-04-04 16:22:50 +01:00
424fd78161
flash: fix flash algo generated - protect with DEVICE_FLASH
2017-03-26 17:59:40 +01:00
4193202f40
STM32 increase IAR heap size for big RAM targets
2017-03-24 14:51:13 +01:00
3d50554105
Merge pull request #3920 from mazimkhan/master
...
Heap size adjusted to work for both tls-client and mbed-client
2017-03-22 12:04:01 +00:00
5a9ea2c1e6
Heap size adjusted to work for both tls-client and mbed-client
...
Targets NUCLEO_F429ZI and UBLOX_EVK_ODIN_W2 have 192K RAM.
Heap size in PR #3871 was increased from 48K to 96K as tls-client
example failed with 48K heap. But this resulted in compilation failures
in mbed-client that requires 71K for global/static data.
Hence this PR reduces heap to 64K that minimum required by tls-client
to work. This also meets mbed-client data segment requirements.
2017-03-15 11:22:24 +00:00
fc972f0a98
fix STM USB config after L4 ,F4, F7 file tree changes
2017-03-14 15:57:40 +01:00
873cacfc73
Revert "Revert "Target stm usb config""
...
This reverts commit ec329be6f2
2017-03-14 15:57:28 +01:00
45c99e69ca
Merge pull request #3879 from bcostm/fix_nucleo-f446ze_adc_pins
...
NUCLEO_F446ZE: Add missing AnalogIn pins on PF_3, PF_5 and PF_10.
2017-03-09 15:48:10 +00:00
fd6fdd5f8c
Merge pull request #3795 from LMESTM/fix_pwm_period_calc
...
Fix pwm period calc
2017-03-09 15:39:00 +00:00
f168f6233a
Merge pull request #3716 from adustm/disco_f429zi_debug
...
fix for issue #3715 : correction in startup files for ARM and IAR, alignment of system_stm32f429xx.c files
2017-03-06 16:49:19 +00:00
e70d985fa3
Add AnalogIn pins on PF3, PF5 and PF10.
...
Don't know why it was missing ?
2017-03-03 16:57:16 +01:00
1f0d73162c
Increase HEAP size for UBLOX_EVK_ODIN_W2 and NUCLEO_F429ZI
2017-03-02 14:11:21 +00:00
d69c5edbd4
fix for issue #3715 : correction in startup files for ARM and IAR, alignment of system_stm32f429xx.c files
2017-02-28 18:15:06 +01:00
747e8e1ea1
STM32: move pwmout device tables to C file
...
In order to avoid possible multiple definitions errors, move the table
initialization to the C file instead of header file
2017-02-27 17:07:01 +01:00
aff49d8d1e
Renamed files in platform to match source names
...
critical.h -> mbed_critical.h
sleep.h -> mbed_sleep.h
toolchain.h -> mbed_toolchain.h
rtc_time.h -> mbed_rtc_time.h
semihost_api.h -> mbed_semihost_api.h
wait_api.h -> mbed_wait_api.h
2017-02-22 18:17:54 -06:00
a8a31da2e8
Merge pull request #3737 from bcostm/dev_can_factorization
...
STM32: can_api.c files factorization
2017-02-22 13:36:59 -06:00
071235415e
Add K64F, KL46Z, F429, F439 and odin flash algos
...
Check in flash algos for the K64F, KL46Z, F429, F439 and Odin board
and enable these features accordingly in targets.json. This
implementation uses flash algo blob that are generated via scripts.
The K64F and KL46Z were generated directly from packs, while the
KL46Z, F429, F439 and odin were generated from code checked into
the FlashAlgo repo.
2017-02-21 14:09:06 -06:00
d14aa74b8c
Merge pull request #3798 from c1728p9/fix_st_vtor
...
Fix vector table bug when using bootloader on ST
2017-02-21 11:02:17 -06:00
b7dce71510
Merge pull request #3665 from LMESTM/dev_stm32_gpio_pins_rework
...
Dev stm32 gpio pins rework
2017-02-21 10:41:16 -06:00
0c4688e7e8
Add support to F4 targets.
2017-02-20 11:19:53 +01:00
242909cf9a
Fix vector table bug when using bootloader on ST
...
The address of the vector table is hardcoded to the start of flash in
many, if not all, ST targets. This causes a crash in applications that
are using a bootloader. This patch updates the boards STM32F429xI,
STM32F439xI and Odin so they properly handle updating the VTOR with
a bootloader.
2017-02-17 22:53:04 -06:00
1cbb3e18ac
STM32: make PWM driver into a common file
...
The pwmout driver is very similar for each STM32 family.
The only family specific part is defined in pwmout_device.h file.
It mainly contains few specific information:
- The mapping of PWM/TIMERS to APB1 or APB2 so that we can get the clock
- The clock calculation uses the right APB clock, which was sometimes
not the case before and could have lead to errors in case dividers were
enabled on APB clock settings. This case is now covered.
- Inactivation of inverted support on feaw families
2017-02-17 14:11:56 +01:00
32ecd00c3a
STM32: move pin_lines_desc to c file
...
Move the const table initialization from the header file
to a new C file to avoid any multiple defined errors.
2017-02-16 19:34:11 +01:00
73955b678e
STM32: pins: move pin_lines_desc table to const
2017-02-16 19:34:05 +01:00
273ac81680
stm32: use default in switch case
...
As commented during PR review, better use default case.
2017-02-16 19:34:01 +01:00
21bc5af3c2
STM32: common pinmap using LL layer to access registers
...
this first makes pinmap.c a common file
then rework it with several goals:
- avoid gpio / irq / pin management extra dependencies
- improve performances when switching between pin modes
This change is based on LL layer to access to registers level
instead of using HAL higher level API.
The family specific functions are implemented in pin_device.h
of each family. Mostly this is F1 family that is differnt
from other ones.
2017-02-16 18:57:18 +01:00
74774f9424
STM32 Make gpio_irq_api.c a common files
...
This requires the creation of gpio_irq_device.h file, where
family specific EXTI IRQ mapping is defined
2017-02-16 18:55:28 +01:00
0e2cc3824b
STM32 : Make port_api.c a common file
2017-02-16 18:55:20 +01:00
bcab66c26d
Update Odin linker scripts for bootloader
...
Add MBED_APP_START and MBED_APP_SIZE to the Odin's linker script
so the start and size of an image can be specified. This allows the
ROM to be split into a bootloader region and an application region.
2017-02-10 18:29:01 -06:00
ca8873b160
Update stm32f429 linker scripts for bootloader
...
Add MBED_APP_START and MBED_APP_SIZE to the stm32f429's linker script
so the start and size of an image can be specified. This allows the
ROM to be split into a bootloader region and an application region.
2017-02-10 18:28:59 -06:00
ec329be6f2
Revert "Target stm usb config"
2017-02-09 15:37:19 -06:00
d990385058
Merge pull request #3684 from jamike/TARGET_STM_USB_CONFIG
...
Target stm usb config
2017-02-09 09:35:16 -06:00
378655f40c
uVisor: Standardize available legacy heap and stack
...
With the RTOS, the STACK_SIZE specified here is unrelated to the stack
size available for the main thread (that runs pre_main). Save memory by
reducing the stack size to a more reasonable amount.
On uVisor, HEAP_SIZE is both a minimum available and maximum available
heap size. The heap can't grow beyond the end of the heap into the
neighboring stack. On all uVisor-supported platforms, guarantee at least
0x6000 bytes of heap space. This increases the portability of uVisor
applications as the memory available for legacy heap allocations is
guaranteed. This helps to avoid out of memory errors on platforms that
were previously guaranteeing less memory.
2017-02-07 16:46:38 +00:00
4d59c8857d
TARGET_STM :move usb config file to target dir
2017-02-03 10:32:19 +01:00
a9ef00231c
STM32F410xB folder structure update
2017-01-27 15:41:49 +01:00
00f80b0abe
STM32F401xE folder structure update
2017-01-27 15:41:49 +01:00
2a4ef3f464
STM32F469xI folder structure update
2017-01-27 15:41:49 +01:00
0883430bba
STM32F412xG folder structure update
2017-01-27 15:41:49 +01:00
5c3bf54928
STM32F407xG folder structure update
2017-01-27 15:41:49 +01:00
756aaf6dfd
STM32F401xC folder structure update
2017-01-27 15:41:49 +01:00
dd7c00f1b6
STM32F429 / F439 folder rework
2017-01-27 15:41:49 +01:00
62433aba36
STM32F411xE folder structure update
2017-01-27 15:41:49 +01:00
43f508947d
STM32F446xE folder structure update
2017-01-27 15:41:49 +01:00
bdcda386d5
Merge pull request #3618 from LMESTM/dev_stm32_PinNamesTypes
...
STM32: Move types definitions to a common file
2017-01-26 10:35:59 +02:00
42f6622f8e
STM32: Move types definitions to a common file
...
Only one point of attention:
STM_MODE_ANALOG_ADC_CONTROL is a specific mode that is only supported on L4.
So STM_MODE_ANALOG_ADC_CONTROL was moved to index 13 (last entry)
of gpio_mode table so that all the other modes are common and only the last
one is specific.
2017-01-24 10:58:36 +01:00
5d04b97b80
STM32: make PortNames.h a common file
...
the same file can be used for all targets
2017-01-19 15:27:19 +01:00
3933ccf76e
Merge pull request #3584 from LMESTM/dev_stm32_common_peripheralpins
...
STM32: make PeripheralPins.h a common file
2017-01-16 16:29:28 +00:00
cc8a132f10
Merge pull request #3575 from LMESTM/dev_stm_factorize_gpio
...
Dev stm factorize gpio
2017-01-16 16:28:27 +00:00
c14d7154e6
Merge pull request #3397 from AlessandroA/stm32f4_support
...
Add uVisor support for the DISCO_F429ZI
2017-01-16 16:24:33 +00:00
1a4394a4a2
STM32: make PeripheralPins.h a common file
...
Simple effort to avoid duplicate code.
2017-01-13 13:25:33 +01:00
57e0225248
STM32: gpio: factorize gpio_api.c and gpio_object.h
...
Let's make the code more common for gpios.
The only difference between STM32 families is that BRR register may
not be available. In case BRR is not available, we use the 16 left bits
of BSRR instead. We could always use BSRR, but BRR saves one left-shift
operation, so let's use it when available.
By default we will consider using BRR, except for platforms that define
GPIO_IP_WITHOUT_BRR.
2017-01-12 19:24:32 +01:00
7a36614e74
STM32: remove useless include
...
gpio_object.h is included from common_objects.h,
so no need to have it here.
2017-01-12 19:11:36 +01:00
3a53a5adc8
DISCO_F429ZI: Add support for uVisor
2017-01-10 13:15:54 +00:00
31e6e5c182
Add CAN object structure
2017-01-10 11:15:38 +01:00
5fd8a5e43a
Merge pull request #3539 from bcostm/dev_trng_nucleo-f412zg
...
NUCLEO_F412ZG - Add support of TRNG peripheral
2017-01-09 10:34:18 -06:00
cefae22703
Merge pull request #3492 from Nodraak/fix/3463/can_read_return_value
...
Fix #3463 CAN read() return value
2017-01-09 10:17:27 -06:00
30ac4aae75
Add support of TRNG peripheral
2017-01-06 10:36:29 +01:00
885b018f77
Set bit without reseting the whole register
2017-01-03 11:46:27 +01:00
7e0b4fe3c9
Fix can_read() return value for STM32 boards
2017-01-03 11:46:25 +01:00
8af69dcbd6
STM32 HAL HCD : USBHOST changes for f4,f2,l4,f7
...
- reset toggle_out , toggle_in at init
- in/out toggle in on ctrl endpoint
- remove call back when transmission restarted
2017-01-02 09:48:15 +01:00
d652d391e6
Merge pull request #3454 from 0xc0170/jeromecoutant-PR_LPT
...
STM32: Refactor lp_ticker.c + rtc_api.c + sleep.c + rtc_api_hal.h files
2016-12-23 13:06:02 +00:00
9b8efb2659
Merge pull request #3391 from jeromecoutant/PR_ST_F4_ASSERT
...
STM32F4 : map ST HAL assert into MBED assert
2016-12-23 13:05:35 +00:00
ab28a5e5cb
STM32: Refactor lp_ticker.c + rtc_api.c + sleep.c + rtc_api_hal.h files
2016-12-21 16:54:18 +00:00
cf75543cfa
Merge pull request #3424 from bcostm/fix_dma_f4
...
STM32F4 - FIX to add the update of hdma->State variable
2016-12-15 10:32:22 -06:00
ea555e68a1
Merge pull request #3393 from andreaslarssonublox/ublox_fix_isr_reg_reeval
...
ISR register never re-evaluated in HAL_DMA_PollForTransfer for STM32F4
2016-12-15 10:28:30 -06:00
38411e917f
Merge pull request #3366 from bcostm/dev_nucleo_f412zg
...
NUCLEO_F412ZG - Add new platform
2016-12-15 10:19:51 -06:00
dd88e97e0b
STM32F4 : correct ST HAL API call
...
- RCC init: one PLL parameter was missing
- GPIO: mode was not allowed by ST HAL API
2016-12-14 10:03:02 +01:00
fe73b43a0a
FIX to add the update of hdma->State variable
2016-12-12 10:43:25 +01:00
a3e41f246e
Merge pull request #3369 from adustm/disco_f469_newpins
...
Add CAN2 missing pins for connector CN12
2016-12-09 15:35:07 +01:00
04f940de2d
Merge pull request #3324 from LMESTM/dev_i2c_common_code
...
Dev i2c common code
2016-12-09 15:30:00 +01:00
db8f966a2c
Correct A3, A4, A5 pins definitions
2016-12-08 15:57:05 +01:00
9ce9d1a9e7
Correct SDIO_UART pins configuration
2016-12-08 15:57:05 +01:00
5b2946ded9
Correct system clock configuration
2016-12-08 15:57:05 +01:00
1796e8cd9a
Update hal_tick files
2016-12-08 15:57:05 +01:00
19828d8dd5
Add startup and linker files for ARM_STD, ARM_MICRO, IAR
2016-12-08 15:57:05 +01:00
2ccbd27baf
Add GCC_ARM files and fix errors during GCC build
2016-12-08 15:57:05 +01:00
f1c6b0f842
Add cmsis, hal_tick, system files
2016-12-08 15:57:05 +01:00
3b1fb796c3
Add first pin, port and objects files
2016-12-08 15:57:05 +01:00
fa8529dea3
STM32F4 : refactor stm32f4xx_hal_conf.h and map ST HAL assert into MBED assert
2016-12-07 15:31:41 +01:00
b5b3bede31
Added tmpisr = regs->ISR; at the end of the while loop to re-evaluate the ISR value
2016-12-07 12:22:31 +01:00
3fdbe85b00
Add CAN2 missing pins for connector CN12
2016-12-05 18:24:30 +01:00
1c2c121741
Merge pull request #3303 from adustm/stm_fix_interrupt_in
...
Fix #2956 #2939 #2957 #2959 #2960 : Add HAL_DeInit function in gpio_irq destructor
2016-12-02 15:47:50 +01:00
3fad50287c
[STM32] Make most of the I2C code into a common file
...
Since most of the code in i2c_api.c is now relying on STM32 HAL, there
is now a possibility to make a common usage of this code accross families.
The IP version definition is introduced per family, to allow a switch of
functionnalities, especially the frequency management which differs.
BTw, we fix the F0 frequency settings at the same time.
F1 is managed for now as an exception as the HAL API for sequential transmit
/receive is not yet available (coming soon)
2016-11-30 08:23:13 +01:00
bd994b3f41
Merge pull request #3302 from bcostm/fix_issue_1685
...
STM32F4 AnalogIn - Clear VBATE and TSVREFE bits before configuring ADC channels
2016-11-29 18:21:14 +01:00
a8ebfaa058
Merge pull request #3288 from LMESTM/dev_spi_asynch_l0l1
...
Dev spi asynch l0l1
2016-11-29 18:17:06 +01:00
bb2d03f34b
Merge pull request #3213 from bcostm/factorize_ticker
...
STM32: Refactor us_ticker.c + hal_tick.c files
2016-11-29 18:10:45 +01:00
93c08f340a
Merge pull request #3062 from jamike/TARGET_STM_USBDEVICE_FS
...
TARGET_STM :USB device FS
2016-11-29 18:07:11 +01:00
9abb7c3777
Updated ARM binary
2016-11-23 17:39:28 +01:00
4648ec606b
Added updated drivers for GCC, IAR
2016-11-23 15:18:17 +01:00
c2d09bd6a2
Fixed wrong start params to cbMAIN_startWlan
2016-11-23 11:38:35 +01:00
a3baf2d7bf
Add more comment on the modified line
2016-11-22 11:03:44 +01:00
0219b64af4
fix #2956 . Add HAL_DeInit function if gpio_irq destructor
...
This allows ci-test-shield tests-api-interruptin to pass
2016-11-21 15:55:15 +01:00
2ae748910b
STM32F4 - Clear VBATE and TSVREFE bits before configuring ADC channels
2016-11-21 13:07:26 +01:00
7cdaba8474
[stm32] remove unused module member in spi_s struct
2016-11-18 09:59:53 +01:00
5750f31d6d
Merge pull request #3238 from LMESTM/dev_i2c_stm32f4hal
...
Dev i2c stm32f4hal
2016-11-16 17:42:12 +00:00
e875dbc90d
Merge pull request #3237 from javierpedrido/master
...
Added back USART 6 pins
2016-11-14 21:46:59 -06:00
896293d5be
Replace TIM_MST_GET_PCLK_FREQ macro with TIM_MST_PCLK macro
2016-11-14 09:31:14 +01:00
0524811c75
STM32xx - Remove hal_tick.c files and update hal_tick.h with new macro
2016-11-14 09:31:14 +01:00
bb10409954
Replace all devices us_ticker files with a common 16b and 32b file
2016-11-14 09:31:14 +01:00
e293e07749
stm32f4 make comment more explicit
...
As reported during review, this was not understandable as it is.
the get_i2c_obj allows to get a pointer to i2c_s struct from the
handle pointer. This therefore makes a hard-coded assumption
about the struct itself
2016-11-10 17:30:04 +01:00
52dc7c5423
Renames all prebuilt binaries to be prefixed with 'lib'
...
This fixes an issue with make_iar, since IAR requires all libraries that
are linked to be prefixed with 'lib'.
2016-11-09 11:08:01 -06:00
b491165eac
[STM32F4] Add few prints for I2C debug
2016-11-09 18:03:04 +01:00
a65bacc032
[STM32F4] Master receive sequential - fix for HAL I2C
...
in case of 2 consecutives calls to HAL_I2C_Master_Sequential_Receive_IT
with the Xfer mode I2C_FIRST_AND_LAST_FRAME, the second trasnfer does
not start at all.
It seems this is because the previous state is maintained as I2C_STATE_MASTER_BUSY_RX
and therefore the START condition will not be generated
2016-11-09 18:03:02 +01:00
a50dc77c60
STM32: I2C: Change the master sync implementation to use ITs
...
With this new implementation, as in slave implementaiton, we use the
interrupts instead of accessing to registers continuously.
This has 2 main advantages:
- this shall improve performances overall and allows for sleep
time in the future
- this also removes some direct registers access from this
layer of code and makes it more generic among families
2016-11-09 18:02:59 +01:00
ec95aa5701
STM32: I2C: Reset I2C in case of errors to recover
...
This is to avoid an IP / bus deadlock.
This requires to store scl and sda in order to call the init function.
2016-11-09 18:02:57 +01:00
42d89b0665
STM32: I2C: Update Timeout computation
...
The timeout values are based on for loops and therefore should depend
on the core frequency and the I2C interface frequency.
This patch introduces this computation and base the timeout on the time
it should take to send a byte over the I2C interface. When sending a
number of bytes, this value can also be used.
In the loops, the timeout should also be decreased before the while
condition so that its value is 0 in case the timeout elapsed and this
can be treated as an error.
2016-11-09 18:02:54 +01:00
79504a6a38
STM32: I2C: Change the slave API implementation to use ITs
...
With this new implementation, the slave use the Interrupt
to be notified of a request from master, instead of
accessing to registers continuously.
This has 2 main advantages:
- this shall improve performances overall and allows for sleep
time in the future
- this also removes some direct registers access from this
layer of code and makes it more generic among families
2016-11-09 17:22:28 +01:00
d71537bb00
STM32: I2C: use irq helper function
2016-11-09 17:22:28 +01:00
c2060e34a3
STM32: I2C: Add-up irq handlers
...
With this commit we define I2C irq handlers that can be used by the driver
in sync mode. This also provides a mecanism for enabling and/or disabling
these handlers
Those handlers will be superseded by MBED ones in case of async mode usage.
2016-11-09 17:22:28 +01:00
490437ae29
STM32: I2C: Move up get_i2c_obj
...
so that it can be used as well in sync mode
2016-11-09 17:22:28 +01:00
0bee69023c
STM32: I2C: Don't use global init variables
...
No need to store the init status of each IP.
Init can be called again in case we try to recover.
2016-11-09 17:22:28 +01:00
2b53dfc453
STM32: I2C: configure slave address with HAL API
...
Instead of direct registers access, let's use HAL API.
This makes the code more generic accross STM32 families.
2016-11-09 17:22:28 +01:00
b7882d6e9b
Added back USART 6 pins
2016-11-09 12:14:35 -03:00
182c311fbd
TARGET_STM : USB FS STM HAL changes
2016-11-09 12:08:45 +01:00
31a7cd017e
Tab -> spaces
2016-11-07 21:59:27 +01:00
baf519f4c5
Updated ublox ODIN-W2 binaries
2016-11-07 19:11:39 +01:00
fde39602b9
Fixed dynamic message queue for scan results
2016-11-07 15:52:59 +01:00
a4f09b5fdb
Added cbMAIN_dispatchEventQueue
2016-11-07 15:52:58 +01:00
32dfe73b09
Added missing checks for wifi_link_out when allocating packets
2016-11-07 15:52:57 +01:00
fd7c9cc13a
Added copying of the wifi_link_out buffer since the buffer might change after call chain has ended.
2016-11-07 15:52:56 +01:00
7eaf32baa0
Merge pull request #3075 from geky/nsapi-error-size-types-2
...
nsapi - Add standardized return types for size and errors
2016-11-07 11:13:40 +00:00
b045c8ba00
nsapi - Adopted standardized return types in the Odin wifi interface
2016-11-02 15:37:34 -05:00
6cddb4df8b
[MTS_MDOT_F411RE] add back SPI3 pins that shouldn't have been removed
2016-11-02 13:41:04 -05:00
4a4d09f6d1
Merge pull request #3074 from jamike/TARGET_STM_INIT_GCC_ALIGNEMENT
...
Target STM - init gcc alignement
2016-10-28 11:04:50 +02:00
4a69072161
INIT:GCC add call to HAL_Init
...
system_init, stops all on going timer.
gcc _start , perform zero initialized.
=> HAL_Init must be done again also in GCC toolchain
2016-10-27 10:40:28 +02:00
ee22d0a054
STM32F4xx: GCC_ARM remove zero bss, in startup.
...
zero bss is done in libc init after call to _start.
2016-10-26 14:41:45 +02:00
4d1d1c5b69
Merge pull request #3068 from MultiTechSystems/mdot-pin-updates
...
MultiTech mDot - clean up PeripheralPins.c and add new pin names
2016-10-25 10:47:59 +02:00
5b67832959
Merge pull request #3054 from andreaslarssonublox/ublox_fix_odin_mbedtls_config
...
Moved mbedtls config for u-blox ODIN-W2 to macros in target.json
2016-10-20 10:59:05 +01:00
fc39f6b736
Merge pull request #3064 from c1728p9/f429_heap
...
NUCLEO_F429 - Increase IAR heap size
2016-10-19 05:51:20 -05:00
2ae71777aa
Merge pull request #3013 from bcostm/check_adcintch_pins
...
STM32xx - Change how the ADC internal pins are checked before pinmap_…
2016-10-19 05:43:15 -05:00
d854547b0c
NUCLEO_F429 - Increase IAR heap size
...
Increase the IAR heap size from 48KiB to 64KiB. This give enough heap
space to run the TLS encryption examples.
2016-10-18 16:43:28 -05:00
c6fde7cfce
[MTS_MDOT_F411RE] remove duplicate PWMs, fix swapped pins
2016-10-18 09:34:46 -05:00
cb113d738e
Moved mbedtls config for u-blox ODIN-W2 to macros in target.json
2016-10-18 01:07:48 +02:00
Indrek Ardel
Anna Bridge
Sam Grove
0x6d61726b
jeromecoutant
Rob Meades
0xc0170
Mohammad Azim Khan
Michel Jaouen
Martin Kojtal
bcostm
adustm
Laurent MEUNIER
Christopher Haster
Russ Butler
Russ Butler
Jaeden Amero
Adrien Chardon
andreas.larsson
Brian Daniels
javierpedrido
Andreas Larsson
Mike Fiore