fire_interrupt function should be used for events in the past. As we have now
64bit timestamp, we can figure out what is in the past, and ask a target to invoke
an interrupt immediately. The previous attemps in the target HAL tickers were not ideal, as it can wrap around easily (16 or 32 bit counters). This new
functionality should solve this problem.
set_interrupt for tickers in HAL code should not handle anything but the next match interrupt. If it was in the past is handled by the upper layer.
It is possible that we are setting next event to the close future, so once it is set it is already in the past. Therefore we add a check after set interrupt to verify it is in future.
If it is not, we fire interrupt immediately. This results in
two events - first one immediate, correct one. The second one might be scheduled in far future (almost entire ticker range),
that should be discarded.
The specification for the fire_interrupts are:
- should set pending bit for the ticker interrupt (as soon as possible),
the event we are scheduling is already in the past, and we do not want to skip
any events
- no arguments are provided, neither return value, not needed
- ticker should be initialized prior calling this function (no need to check if it is already initialized)
All our targets provide this new functionality, removing old misleading if (timestamp is in the past) checks.
This commit completely rewrote flash_api.c in a few places so kicked out changes from Master and accepted the branch changes.
F429 + F439 : changes after code review
GetSector has been rewritten
- default value is the same as before patch
- system_stm32f4xx.c file is copied to family level with all other ST cube files
- specific clock configuration is now in a new file: system_clock.c
- nvic_addr.h file is now in TARGET_STM level, and can be used everywhere
With default sampling time, the MBED2 and CI test shield tests would fail
because the stabilization slope of ADC is relatively slow.
ERROR (out:0.8000) - (in:0.7407) = (0.0593)
ERROR (out:0.9000) - (in:0.8354) = (0.0646)
ERROR (out:1.0000) - (in:0.9289) = (0.0711)
This is related to the 10kOhms resistors used to connect Ain to
Aout mounted on the CI shileds, and internal capacitance of L0 targets.
If connecting Ain and Aout with wires, bypassing the resistors, the test
is passed. So we're increasing the sampling time to let the automated
ci shiled tests PASS.
OK (out:0.8000) - (in:0.7863) = (0.0137)
OK (out:0.9000) - (in:0.8869) = (0.0131)
OK (out:1.0000) - (in:0.9844) = (0.0156)
Moving some code in common to be able to manage several ADC instances,
or several channels of an instance.
The change involves:
- moving dac_s structure definition to common_object.h
- create TARGET_STM/analogout_api.c and move fully common analog_out
functions in there
- rename analogout_api.c of each target family into analogout_device.c
to keep platform specific code
- update analogout_device.c to rely on obj->handle and obj->channel
- align analogout_init function as much as possible between families in
analogout_device.c files
ADC1 channel2 and ADC2 of few targets only have an output switch and no
buffer. This switch needs to be enabled, and also the buffer can be enabled
in order to reduce the output impedance on output, and to drive external
loads directly without having to add an external operational amplifier.
This allows a proper handling of multiple instances. Also this commit
stores the channel in the HAL format so that it can be re-used more easily
and call to HAL are straightforward.
Martin Kojtal
Jimmy Brisson
adustm
jeromecoutant
Laurent MEUNIER
bcostm
Anna Bridge
arostm